Long Stroke and High-Speed Movement

Size: px
Start display at page:

Download "Long Stroke and High-Speed Movement"

Transcription

1 NS NS Rotating Nut inear Actuator ong and High-Speed Movement w w w. i n t e l l i g e n t a c t u a t o r. c o m

2 Nut Rotation Actuator that Provides ong and Speed Nearly As Fast as a inear Speed 0 mm/s, Acceleration G High-Speed Performance and Multislider to Greatly Reduce ycle Time Moves the slider by rotating a nut, not with a ball screw. The actuator structure is that rather than moving the nut in the straight line by rotating a ball screw, the ball screw is fixed and the nut is rotated by a servo motor built into the slider, so the slider moves in a straight line. ecause the ball screw does not rotate, the influence of dangerous rotation speeds is minimal and this makes movement at high speed possible even for long strokes. Nut all screw Motor all screw ISA series Nut + servo motor NS series

3 speed 0 mm/s, maximum acceleration g high-speed performance A maximum speed of 0 mm/s is attained through the use of high-lead precision screws (equivalent to 5). Also, since there is minimal impact from dangerous rotation speeds, movement is possible at the maximum 0 mm/s even at the maximum stroke (3000 mm), so the cycle time can be greatly reduced. The middle support structure provides a long stroke of 3000 mm. The NS series combines nut rotation functions with the intermediate support structure that has proven itself in the ISA series to attain a 3000-mm stroke, stunning for a ball screw machine. speed (m/s) ISA series Intermediate support NS series about 3.5x high-speed performance Intermediate support Multi-slider support [equipped with collision prevention function] Two sliders are set on one shaft and a multi-slider is set to operate them separately. Since this makes it possible for two shafts to operate in the space of one shaft, it has a great effect in saving space and reducing tact time. The "collision prevention function" to prevent collisions between the sliders is standard equipment. ength reduced further Using a servo motor and putting the motor on the outside of the ball screw eliminates the previous need for motor installation space and links the ball screw directly to further shorten the length even compared to the IS series which has already greatly reduced it. Extension cable track option setting A cable track that expands the capacity is available as an option. 6 mm shortening NS series IS series * ompared with 500mm stroke and with mid support <Extension cable track>

4 NS 0 T Series Type Motor type able length Absolute Incremental Horizontal specifications/ single slider Horizontal specifications/ multi-slider Horizontal specifications/ single slider with intermediate support Vertical specifications/ single slider Vertical specifications/ multi-slider No cable m 3 m 5 m ength specified Robot cable Standard cable track direction Standard cable track direction 3 Standard cable track direction 4 rakes (only for vertical specifications) reep Extension cable track direction Extension cable track direction Extension cable track direction 3 Extension cable track direction 4 imit switch Specifications Table Slider Appearance Type Motor type Page thrust (N) transportable speed" weight (kg) (mm/s) Horizontal specifications Single slider XMS P5 Multi-slider XMM P6 Horizontal specifications with intermediate support Single slider XMXS Absolute Incremental P7 Single slider ZMS P8 Vertical specifications Multi-slider ZMM P9 Table of Payload y Acceleration onditions. Horizontal installation 3 Type Motor output Payload by acceleration (kg) (W) speed" acceleration (mm/s) (G) 0.3G 0.4G 0.5G 0.6G 0.7G 0.8G 0.9G.0G XMS XMM XMXS. Vertical installation ZMS ZMM Type Motor output Payload by acceleration (kg) (W) speed" acceleration (mm/s) (G) 0.3G 0.4G 0.5G 0.6G 0.7G 0.8G 0.9G.0G

5 Explanation of Main Unit rakes Explanation This is a structure that holds the slider so that if the actuator is used vertically and the power is switched Off or the servo goes Off, the slider does not fall and damage installed items. In the NS series vertical specifications (ZMS/ZMM), brakes are standard equipment. (rakes are not set for the horizontal specifications.) reep sensor Explanation When the homing operation is carried out with the incremental specifications, in order to shorten the homing time, the slider is moved at high speed to just before the position and when it passes this sensor, the speed is dropped to resume normal homing operations. Since this sensor is mounted within the actuator itself, it does not af fect the appearance or external dimensions. Standard cable track installation direction change/extension cable track installation T / T3 / T4 (standard cable track installation direction) ET / ET / ET3 / ET4 (extended cable track installation direction) Explanation The cable track installation direction can be selected from the following four types (including the standard installation direction). [Installation direction] [able track internal dimensions] Installation direction (standard) Standard cable track: No symbol Extended cable track: Symbol ET Installation direction (standard; different use) Standard cable track: Symbol T Extended cable track: Symbol ET Installation direction 3 (standard; reverse origin) Standard cable track: Symbol T3 Extended cable track: Symbol ET3 Installation direction 4 (T, origin reversed) Standard cable track: Symbol T4 Extended cable track: Symbol ET4 <Extended cable track> Origin limit switch Explanation Normal NS series homing operations use the "push contact technique" in which the origin is reached by bringing the slider in contact with a stopper, inverting, then detecting the Z phase. (origin limit switch) is the option for executing the homing operation without contact by detecting using a proximity sensor, then inverting. Since origin limit switch is mounted within the actuator itself, it does not affect the appearance or external dimensions. 4

6 Single-axis robot nut rotation type Main unit width 45mm 0 W horizontal specifications/single slider NS-XMS item NS XMS 0 T Series Type A : Absolute I : Incremental Motor type 0:0W :mm 0:0mm 500:500mm 00:00mm T:SON XSE-P/Q able length N :None S :3m M:5m X:ength specified See option table below /specs Motor output (W) NS-XMS T- 3-4 Absolute NS-XMS T- 3-4 Incremental 0 * For the model types above, is the encoder type, the stroke, 3 the cable length, and 4 the options. Speed (mm/s) Acceleration (*) Horizontal (G) Vertical (G) Horizontal only Payload (*, *) Horizontal (kg) Vertical (kg) / acceleration / acceleration Horizontal only thrust (N) ommon specifications Name reep sensor Standard cable track installation direction change Extended cable track imit switch T - T4 ET - ET4 See Page Drive type Repeatability acklash Guide all screw ø0 mm Equivalent to 5 form rolled Absolute specifications ±0.0 mm/incremental specifications ± 0.0 mm 0.0 mm max. ase one-piece model Permitted load moment M a: 04.9N m M b: 49.9N m M c :48.9N m Extension load length ase able length (*3) Ma direction: 750 mm max. Mb, Mc direction: 750 mm max. Material: Aluminum, white treated alumite N: No cable S: 3m M: 5m X: ength specified Usage ambient temperature 0-º, 85% RH max. (no condensation allowed) Dimension diagram AD drawings can be downloaded from the homepage D AD (Reamer pitch) -ø 8H7 depth 0 D section Slot depth 0 ø6 ø 9 ase installation hole section Origin 8-M8 depth 0 * During homing procedure, the slider moves to the mechanical end, so watch out for interference with the ME (*) surroundings. D section -M5 depth 0 ø8h7 depth 0 SE : end ME : Mechanical end -ø9 through hole, ø6 depth spot face (from opposite side) <Extension cable track> About the number of cables and hoses that can be contained and their diameters * Make the gap between the cable and hose outside and the inner wall and the gap between cables and hoses at least mm. * Make the cable and hose exterior diameter 6.8 or less and run cables and hoses in parallel, not crossing each other. *3 aution: If more cables and hoses are put into a cable track than the specifications allow, this imposes excess force on the cables and drastically shortens their service life A Weight (kg) specifications 5 X-SE-P/Q SON number of axes controlled 6 axes axes axis onnectable encoder types Absolute/ incremental Operation method Program Positioner pulse string control Power supply voltage Three phase/ single phase 00 VA Single phase 00/00 VA Notes Note : For details on the relationship between the acceleration and the payload, see Page 3. Note : The payload is the value when operating at the maximum speed. Note 3: The maximum cable length is 30 m. When specifying the length, enter in meters. (Example: X08=8 m)

7 Single-axis robot nut rotation type Main unit width 45mm 0 W Horizontal specifications/multi-slider NS-XMM item NS XMM 0 T Series Type A : Absolute I : Incremental Motor type 0:0W :mm 0:0mm 50:50mm 50:50mm T:SON XSE-P/Q able length N :None S :3m M:5m X:ength specified See option table below /specs reep sensor Name Extension cable track imit switch ET See Page Motor output (W) NS-XMM T- 3-4 Absolute Incremental 0 50 ~ 50 NS-XMM T * For the model types above, is the encoder type, the stroke, 3 the cable length, and 4 the options. ommon specifications Drive type Repeatability acklash Guide Permitted load moment Extension load length ase Speed able length (*3) Acceleration (*) all screw ø0 mm Equivalent to 5 form rolled Absolute specifications ±0.0 mm/incremental specifications ± 0.0 mm 0.0 mm max. ase one-piece model Payload (*, *) Horizontal (kg) Vertical (kg) Horizontal (kg) Vertical (kg) / um acceleration acceleration Maxi- / Horizontal only Horizontal only M a:04.9n m M b:49.9n m M c:48.9n m Ma direction: 750 mm max. Mb, Mc directions: 750 mm max. Material: Aluminum, white treated alumite N: No cable S: 3m M: 5m X: ength specified Usage ambient temperature 0-º, 85% RH max. (no condensation allowed) thrust (N) Dimension diagram AD drawings can be downloaded from the homepage D AD (Reamer pitch) -ø8 H7 depth 0 D section Slot depth 0 ø6 ø 9 ase installation hole section 00 (minimum between sliders) 00 (minimum between sliders) ME Origin Origin 8-M8 depth 0 During homing procedure the slider moves to the mechanical end, so watch out for interference with the surroundings. ME D section M5 depth 0 M5 depth 0 ø8 H7 depth 0 SE: end ME: Mechanical end -ø9 through hole, ø6 depth spot face (from opposite side) <Extension cable track> About the number of cables and hoses that can be contained and their diameters Make the gap between the cable and hose outside and the inner wall and the gap between cables and hoses at least mm. Make the cable and hose exterior diameter 6.8 or less and run cables and hoses in parallel, not crossing each other. aution : If more cables and hoses are put into a cable track than the specifications allow, this imposes excess force on the cables and drastically shortens their service life. A Weight (kg) specifications X-SE-P/Q SON number of axes controlled 6 axes axes axis onnectable encoder types Absolute/ incremental Operation method Program Positioner pulse string control Power supply voltage Three phase/ single 00 VA Single phase 00/00 VA Notes Note : For details on the relationship between the acceleration and the payload, see Page 3. Note : The payload is the value when operating at the maximum speed. Note 3: The maximum cable length is 30 m. When specifying the length, enter in meters. (Example: X08=8 m) 6

8 Single-axis robot nut rotation type, Main unit width 45mm 0 W Horizontal specifications, single slider with intermediate support NS-XMXS item NS XMXS 0 T Series Type A : Absolute I : Incremental Motor type 0:0W :mm 0:0mm 300:300mm 3000:3000mm T:SON XSE-P/Q able length N :None S :3m M:5m X:ength specified See option table below /specs NS-XMXS T- 3-4 NS-XMXS T- 3-4 Horizontal only ~ 3000 * For the model types above, is the encoder type, the stroke, 3 the cable length, and 4 the options. Name reep sensor Standard cable track installation direction change Extended cable track imit switch T ~ T4 ET ~ ET4 Motor output (W) Speed Acceleration (*) Payload (*, *) Horizontal (kg) Vertical (kg) Horizontal (kg) Vertical (kg) um acceleration acceleration Maxi- / / 0.3 Horizontal only Horizontal only thrust (N) ommon specifications Drive type all screw ø0 mm Equivalent to 5 form rolled Repeatability Absolute specifications ±0.0 mm/incremental specifications ± 0.0 mm acklash 0.0 mm max. Guide ase one-piece model Permitted load moment M a:04.9n m M b:49.9n m M c:48.9n m Extension load length Ma direction: 750 mm max. Mb, Mc directions: 750 mm max. ase Material: Aluminum, white treated alumite able length (*3) N: No cable S: 3m M: 5m X: ength specified Usage ambient temperature 0-º, 85% RH max. (no condensation allowed) Dimension diagram AD drawings can be downloaded from the homepage D AD (Reamer pitch) -ø8 H7 depth 0 Slot depth 0 D section ø 6 ø 9 ase installation hole section Origin 8-M8 depth 0 During homing procedure, the slider moves to the mechanical end, so watch out for interference with the surroundings. D section -M5 depth 0 -ø8 H7 depth 0 SE: end ME: Mechanical end KSH-4W THK -ø9 through hole, ø6 depth spot face (from opposite side) <Extension cable track> About the number of cables and hoses that can be contained and their diameters ) Make the gap between the cable and hose outside and the inner wall and the gap between cables and hoses at least mm. ) Make the cable and hose exterior diameter 6.8 or less and run cables and hoses in parallel, not crossing each other. 3) aution : If more cables and hoses are put into a cable track than the specifications allow, this imposes excess force on the cables and drastically shortens their service life. A Weight (kg) specifications 7 X-SE-P/Q SON number of axes controlled 6 axes axes axis onnectable encoder types Absolute/ incremental Operation method Program Positioner pulse string control Power supply voltage Three phase/ single phase 00 VA Notes Single phase 00/00 VA Note : The maximum acceleration is 0.3 G. Note : The payload is the value when operating at the maximum speed. Note 3: The maximum cable length is 30 m. When specifying the length, enter in meters. (Example: X08=8 m)

9 Single-axis robot nut rotation type, Main unit width 45mm 0 W Vertical specifications, single slider NS-ZMS item NS ZMS 0 T Series Type A : Absolute I : Incremental Motor type 0:0W :mm 500:500mm 000:000mm T:SON XSE-P/Q able length N :None S :3m M:5m X:ength specified See the option price table below. /specs NS-ZMS T Absolute Incremental Motor output (W) 0 speed (m/s) Acceleration (*) Payload (*, *) Horizontal (G) Vertical (G) Horizontal (kg) / acceleration ~ For vertical only For vertical only Vertical (G) / acceleration thrust (N) 3. * For the model types above, is the encoder type, the stroke, 3 the cable length, and 4 the options. rakes reep sensor Name Standard cable track installation direction change Extended cable track imit switch See Page Remarks T ~ T4 ET~ ET4 Standard equipment ommon specifications Drive type all screw ø0 mm Equivalent to 5 form rolled Repeatability Absolute specifications ±0.0 mm/incremental specifications ± 0.0 mm acklash 0.0 mm max. Guide ase one-piece model Permitted load moment M a:04.9n m M b:49.9n m M c:48.9n m Extension load length Ma direction: 750 mm max. Mb, Mc directions: 750 mm max. rakes Non-excitation operation electromagnetic brakes standard equipment ase Material: Aluminum, white treated alumite able length (*3) N: No cable S: 3m M: 5m X: ength specified Usage ambient temperature 0-º, 85% RH max. (no condensation allowed) Dimension diagram AD drawings can be downloaded from the homepage D AD (Reamer pitch) -ø8 H7 depth 0 Slot depth 0 ø6 ø 9 D section ase installation hole section 8-M8 depth 0 During homing procedure, Origin the slider moves to the mechanical end, so watch out for interference with the surroundings. D section -M5 depth 0 ø8h7 depth 0 SE: end ME: Mechanical end KSH-4W THK <Extension cable track> About the number of cables and hoses that can be contained and their diameters ) Make the gap between the cable and hose outside and the inner wall and the gap between cables and hoses at least mm. ) Make the cable and hose exterior diameter 6.8 or less and run cables and hoses in parallel, not crossing each other. 3) aution : If more cables and hoses are put into a cable track than the specifi - cations allow, this imposes excess force on the cables and drastically shortens their service life. -ø9 through hole, ø6 depth spot face (from opposite side) A Weight (kg) specifications X-SE-P/Q SON number of axes controlled 6 axes axes axis onnectable encoder types Absolute/ incremental Operation method Program Positioner pulse string control Power supply voltage Three phase/ single phase 00 VA Single phase 00/00 VA Notes Note : For details on the relationship between the acceleration and the payload, see Page 3. Note : The payload is the value when operating at the maximum speed. Note 3: The maximum cable length is 30 m. When specifying the length, enter in meters. (Example: X08=8 m) 8

10 Single-axis robot nut rotation type, Main unit width 45 mm 0 W Vertical specification multi-slider NS-ZMM item NS ZMM 0 T Series Type A : Absolute I : Incremental Motor type 0:0W 0:0mm 50:50mm 950:950mm T:SON XSE-P/Q able length N :None S :3m M:5m X:ength specified Option table below Reference /specs NS-ZMM T Absolute Incremental Motor output (W) 0 Speed (mm/s) Acceleration (*) Horizontal (G) Vertical (G) Ratings Ratings 0 50 ~ Vertical only Vertical only Payload (*, *) Horizontal (G) Vertical (G) Ratings / Ratings / acceleration acceleration propulsion 3. * For the model type above, is the encoder type, the stroke, 3 the cable length, and 4 the options. ommon specifications Name rakes reep sensor Extended cable pair imit switch ET Reference page Remarks Standard equipment Drive type all screw ø0 mm Equivalent to 5 form rolled Repeatability acklash Guide Absolute specifications ±0.0 mm/incremental specifications ± 0.0 mm 0.0 mm max. ase one-piece model Permitted load moment Ma:04.9N m M b:49.9n m M c:48.9n m Extended load length rakes ase able length (*3) Usage temperature Ma direction: 750 mm max. Mb, Mc direction: 750 mm max. Non-excitation operating electromagnetic brakes standard Material: Aluminum, white treated alumite N: No cable S: 3m M: 5m X: ength specified 0-º, 85% RH max. (no condensation allowed) Dimensional diagam AD drawings can be downloaded from the home page. D AD (Reamer pitch) -ø8 H7 depth 0 Slot depth 0 ø6 ø 9 D section ase installation hole section details 00 (minimum between sliders) Origin 00 (minimum between sliders) Origin 8-M8 depth 0 During homing procedure, the slider moves to the mechanical end, so watch watch out for interference with the suroundings. D section M5 depth 0 M5 depth 0 ø8 H7 depth 0 SE: end ME: Mechanical end ø9 through hole, ø6 depth spot face (from opposite side) KSH-4W THK <Extension cable track> About the number and diameters of cables and hoses stored ) Set the gaps between the outside of cable and hoses and the inner walls and between cable hoses themselves to mm min. ) Make cable and hose diameters 6.8 max. and use them running in parallel to each other, not crossing over. ) If more cables and hoses are stored than the specifications call for, this will generate excessive force on them and drastically shorten their service life. A Weight (kg) specifications 9 X-SE-P/Q SON number of axes controlled 6 axes axes axis onnectable encoder types Absolute/ incremental Operation dimensions Program Positioner pulse string control Power supply voltage 3-phase/- phase, 00 VA Single phase A, 00/00 V Notes Note : For the relationship between the acceleration and the payload, see Page 3. Note : The payload is the value when operating at the maximum speed. Note 3: The maximum cable length is 30 m. Enter the length specification in meters. (Example: X08=8 m)

11 ontroller specifications ontroller series type SON XSE P (Standard) Type Q (Global) Type General specifications Input/output communications Program ontrol specifications asic specifications Appearance Power supply capacity Insulation resistance Withstand voltage Input power supply Within operating power supply voltage connected total axis output (W) number of axes controlled Position detection technique Safety circuit configuration Drive power cut-off Enable input Speed setting Acceleration setting Operation technique Program language Program count Program step count Multi-task program count Position count Data storage device Data input device (Option) Standard I/O Expanded I/O Serial communications functions Other I/O Field network Protection functions Usage ambient temperature and humidity Usage ambient atmosphere External dimensions Weight Accessories 844 VA Single phase 00 VA 750W (00V power supply specifications) axis Positioner operation Pulse string control max. EEPROM Teaching box s: RM-T/TD/E/P Software for P : RM-0-MW (for RS3 communications) RM-0-US (for US communications) 6 inputs/6 outputs (NPN/PMP selectable) Teaching port (RS485) System I/O (Emergency stop input, brake power supply) DeviceNet, -ink, Profius 7 (W) 00.5(H) (D).kg I/O flat cable ( lines) 500 VD, 00 M min. 500 VA for one minute Duplex not possible Internal relay cut-off contact input (Internal power feed type) Not possible 660 VA max. (for 0W, -axis operation) Single phase 00 VA Single phase 00 VA 0W (00V power supply specifications) 800W (00V power supply specifications) axis Incremental encoder/absolute encoder Program operation Positioner operation (Switchable) Duplex not possible Internal relay cut-off contact input (internal power feed type) mm/s upper limit, which depends on the actuator 0.0 G upper limit, which depends on the actuator Flash ROM (Optional SRAM battery backup) Teaching box s: IA-T-X-J, IA-T-XD-J Software for P : IA-0-X-MW-J (for RS3 communications) IA-0-US (for US communications) 4 inputs/8 outputs (NPN/PMP selectable) Teaching port (RS3) US connector System I/O (Emergency stop input, brake power supply) (Future support planned).4kg I/O flat cable (34 lines) Super SE language 64 Teaching box s: IA-T-X, IA-T-XD Software for P : IA-0-X-MW (for RS3 communications) IA-0-X-US (for US communications) 0W (for three-phase power) 600W (for single-phase power) 6 axis Duplexing possible External safety circuit contact input (External power feed type, duplex) Program operation only Flash ROM + SRAM battery backup 3 inputs/6 outputs (NPN/PMP selectable) 9 inputs max./9 outputs max. Teaching port (RS3) ch RS3 port Teaching box : IA-T-XA Software for P : IA-0-XA-MW (for RS3 communications) Safety category support ( with cable) System I/O (Emergency stop input, enable input, ready output) DeviceNet, -ink, Profius, Ethernet Motor overcurrent, motor driver temperature check, overload check, encoder open line check, software limit over, system abnormality, battery abnormality, other 0-º, 0-95% (no condensation allowed) There must be no corrosive gas and dust must not be particularly bad. 00 (W) x 0.6 (H) x 6 (D) When absolute battery mounted ±0% 500 VA for one minute 4998 VA max. (for 0W, 6-axis operation) 500 VD, 0 M min. Three-phase 00 VA Single phase 00 VA 3 (W) x 95 (H) x 5.3 (D) (For 6-axis absolute specifications) 5.7 kg (for 6-axis absolute specifications) I/O flat cable (50 lines) 500 VA for one minute 0

12 atalogno.:j008-a(march007) Atlanta Office 0 Kennestone ircle, Suite E, Marietta, GA

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.

More information

Ø50mm Shaft Multi-Turn Absolute Type

Ø50mm Shaft Multi-Turn Absolute Type Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn

More information

Accessories. Servo Motors. Servo Motors B-47. Accessories

Accessories. Servo Motors. Servo Motors B-47. Accessories Servo Motors Servo Motors Accessories Accessories Page Cables B-48 Flexible Couplings B-52 Control Module B-55 Data Setting Software B-55 Accessory Sets B-56 Battery B-56 Regeneration Units B-57 B-47 Accessories

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment. Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

General Specifications

General Specifications General Specifications WG41F11C Compact O Frame GS 14M04B10-20E-Z1 [Style: S1] Overview The WG41F11C Compact O frame is a space-saving frame designed for coating lines of battery electrode sheets. This

More information

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF

More information

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment) OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for

More information

AF-300 E11 Adjustable Frequency Drive

AF-300 E11 Adjustable Frequency Drive AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed

More information

Accessories. Servo Motors. Servo Motors B-45. Accessories

Accessories. Servo Motors. Servo Motors B-45. Accessories Servo Motors Servo Motors Accessories Accessories Introduction NX Accessories Page Cables B-46 Flexible Couplings B-50 Control Module B-51 Data Setting Software B-51 Accessory Sets B-52 Regeneration Units

More information

LXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O

LXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number

More information

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that

More information

Up to 85% higher Service Life due to efficient sealing method.

Up to 85% higher Service Life due to efficient sealing method. Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348

More information

G5-series AC Servo Drives with Built-in EtherCAT Communications Linear Motor Type

G5-series AC Servo Drives with Built-in EtherCAT Communications Linear Motor Type s with Built-in Linear Motor Type R88D-KN@-ECT-L Contents Ordering Information Specifications General Specifications Characteristics Servo Drives with 100 VAC Input Power Servo Drives with 200 VAC Input

More information

F250. Advanced algorithm enables ultra high speed and maximum flexibility. High-performance Vision Sensor. Features

F250. Advanced algorithm enables ultra high speed and maximum flexibility. High-performance Vision Sensor. Features High-performance Vision Sensor Advanced algorithm enables ultra high speed and maximum flexibility Features Inspection and positioning that was difficult with previous vision sensors is now surprisingly

More information

1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times

1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for

More information

Photoelectrics Through-beam Type PA18C.T..., DC

Photoelectrics Through-beam Type PA18C.T..., DC Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:

More information

Sauter Components

Sauter Components 51.362/1 AVM 105S, 115S: Actuator with SAUTER Uniersal Technology (SUT) How energy efficiency is improed Automatic adaptation to ale, precision control and high energy efficiency with minimal operating

More information

HOG 86. The incremental HeavyDuty encoder for highest demands

HOG 86. The incremental HeavyDuty encoder for highest demands HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design

More information

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control

More information

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

DKS 40: Incremental Encoder

DKS 40: Incremental Encoder DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. Besides has the DKS 4 a very high protection

More information

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection

More information

Material: Weight: IP Rating: Cable: Connector:

Material: Weight: IP Rating: Cable: Connector: Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:

More information

Flexible. Fast. Precise. PPU-E Pick & Place Unit

Flexible. Fast. Precise. PPU-E Pick & Place Unit PPU-E Flexible. Fast. Precise. PPU-E Pick & Place Unit Compact 2-axis unit for a faster, flexible running of any curve on one plane. Field of Application For use in clean and slightly polluted environment.

More information

DDF-SE. Application example. Feed-through Stationary Rotary Feed-through. Max. speed 500 revs/ min. Air feed-through Up to 6x

DDF-SE. Application example. Feed-through Stationary Rotary Feed-through.  Max. speed 500 revs/ min. Air feed-through Up to 6x DDF-SE www.comoso.com Sizes 080.. 120 Max. speed 500 revs/ min Air feed-through Up to 6x Electrical feed-throughs Up to 8x Application example Turning a component for laser welding or centrifugal drying

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A DATASHEET - NZMN3-VE630 Circuit-breaker, 3p, 630A Part no. NZMN3-VE630 Catalog No. 259133 EL-Nummer (Norway) 0004358791 Similar to illustration Delivery program Product range Circuit-breaker Protective

More information

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance

More information

SA1J-F: Full Color Fiber Optic Sensors

SA1J-F: Full Color Fiber Optic Sensors Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain ice: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com This new line of full color sensors offers

More information

Cylindrical Photoelectric Sensor CY-100 SERIES

Cylindrical Photoelectric Sensor CY-100 SERIES Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector

More information

40 A6B2 INCREMENTAL ROTARY ENCODERS,OUTSIDE DIAM 40 MODEL A6B2 SUBSTITUTE E6B2

40 A6B2 INCREMENTAL ROTARY ENCODERS,OUTSIDE DIAM 40 MODEL A6B2 SUBSTITUTE E6B2 ROTRY ENCODERS 40 6 INCREMENT ROTRY ENCODERS,OUTSIDE DIM 40 MODE 6 SUSTITUTE E6 Sequence Number 40 outsidediam diam 40 : C: PNP open collector Open collector output Push Pull output S: singleness W: 90

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable

More information

Innovation & Excellence. Index. Index. Innovation & Excellence. Introduction 4-5. Our Features 6-7. Applications

Innovation & Excellence. Index. Index. Innovation & Excellence. Introduction 4-5. Our Features 6-7. Applications Linear Motor Stages Index Innovation & Excellence Introduction 3 Our Features 4-5 Applications 6-7 Index MLE Series iron core motor MLE 3 Linear Units MLE 5 Linear Units MLE 7 Linear Units MLU Series ironless

More information

2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer

2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer LE7M-2 W72 H72mm, Weekly/Yearly Timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time function Built-in

More information

Linear flow controls VFC Linear flow controls with actuator IFC

Linear flow controls VFC Linear flow controls with actuator IFC Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or

More information

MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit

MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit Differential RS422 line driver output. Two count channels ( A & B ) wave in quadrature with compliments and index Low cost non-contacting linear

More information

Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/

Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/ > 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module

More information

TeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40

TeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40 Characteristics Type of contactor LC- LC- LC- LC- LC-D & D09 D8 D2 D38 D40 D0 D9 LC-D0 DT20 & DT2 DT32 & DT40 Environment Rated insulation voltage (Ui) Conforming to IEC 947-4-, overvoltage category III,

More information

Analog Input Module HART Ex n Inputs, 8 Channels Series 9461/15

Analog Input Module HART Ex n Inputs, 8 Channels Series 9461/15 > 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector

More information

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display. ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read

More information

AP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display

AP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display AP-34 Separate Amplifier Type Sensor Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display Description Industry's smallest & lightest

More information

EVENT INPUT/OUTPUT MODULE [PUME]

EVENT INPUT/OUTPUT MODULE [PUME] PUM Series Multi-loop module type Temperature controller DATA SHEET EVENT INPUT/OUTPUT MODULE [] is a digital input/output module used as an auxiliary input/output of control modules. Each module, 30mm

More information

Displacement Measuring System for Cylinder Series OSP-P

Displacement Measuring System for Cylinder Series OSP-P -SENSOFLEX Displacement for Cylinder Series OSP-P Overview...112 Technical Data SFI-plus...113 Dimensions SFI-plus...114 Order Information...115 111 Sensoflex - Sensoflex Displacement measuring system

More information

Sensor technologies Proximity sensors Series ST4. Brochure

Sensor technologies Proximity sensors Series ST4. Brochure Series ST Brochure 2 Series ST ST Sensor, Series ST with cable open cable ends, -pin Sensor, Series ST mm C-slot with cable Plug, M8, -pin 6 Sensor, Series ST mm C-slot with cable Plug, M8, -pin, with

More information

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100 DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation

More information

2000 W, 2450 MHz Microwave Generator GMP 20K SM 56M230 FST 3 IR

2000 W, 2450 MHz Microwave Generator GMP 20K SM 56M230 FST 3 IR 2000 W, 2450 MHz Microwave Generator GMP 20K SM 56M230 FST 3 IR Power supply It is based upon the latest switch mode power supply technology, offering size reduction (i.e. 19 rack, 3U power supply), good

More information

USER S MANUAL. FX2N-8AD Analog input block

USER S MANUAL. FX2N-8AD Analog input block USER S MANUAL FX2N-8AD Analog input block FX2N-8AD Analog input block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation

More information

Ecoline S series. Precision solutions for quality production. Innovations for a better world.

Ecoline S series. Precision solutions for quality production. Innovations for a better world. Ecoline S series. Precision solutions for quality production. Innovations for a better world. Precision solutions for quality production. Die casting with confidence. The Ecoline S is a series of cold-chamber

More information

LCD MODULE SPECIFICATION

LCD MODULE SPECIFICATION TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0220IT-1 Revision Engineering Date Our Reference DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE DESCRIPTION FROM TO A 2008.03.10 First Release.

More information

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A Deliveryprogramme Circuitbreak.3pselect.protection Partno. Articleno. 265777 NZMH4-VE1600 Product range Circuit-breaker Protective function Systems, cable, selectivity and generator protection Standard/Approval

More information

Flat. Compact. Cost-effective. FWS Flat Change System

Flat. Compact. Cost-effective. FWS Flat Change System Flat. Compact. Cost-effective. FWS Flat Change System Manual tool changing system for small manipulators and grippers, with integrated air and electrical feed-through. Field of Application The changer

More information

SPECIFICATION NO Model 207 Automatic GTAW Welding System

SPECIFICATION NO Model 207 Automatic GTAW Welding System 1.0 Introduction The Model 207 is a completely self-contained Gas Tungsten Arc Welding (GTAW) System requiring only input power, inert gas and AMI Welding Head (or manual torch) for operation. Its small

More information

Hinges with built-in safety multiple switch SUPER CFSW. Hinges and connections. IP67 RoHS PA

Hinges with built-in safety multiple switch SUPER CFSW. Hinges and connections. IP67 RoHS PA Hinges with built-in safety multiple switch SUPER ECHNO POLYMER IP RoHS PA +0-0 MAERIAL Hinge body: self-extinguish high-rigidity SUPER-technopolymer, black or grey colour RAL 00 (C). Rotation pin: glass-fibre

More information

PKK PKK CHARACTERISTICS. Dimensions. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.

PKK PKK CHARACTERISTICS. Dimensions. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max. PKK loa d / (kg/m) PKK 10 8 6 4 2 0 0 P KK 1 20 PKK applications 49 PKK dimensions 50 PKK types 52 PKK sizes 54 PKK parts 55 PKK assembly 56 PKK article numbers 62 LOAD DIAGRAM PKK 2 2 0 2 P KK 2 40 PKK

More information

Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor

Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive

More information

I r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 Deliveryprogramme Circuitbr.,3pmotorprotection Partno. Articleno. 265784 NZMN4-ME875 Product range Circuit-breaker Protective function Motor protection Standard/Approval IEC Installation type Fixed Release

More information

Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications

Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications March 2006 Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

Electric Rotary Modules. Rotary Actuators

Electric Rotary Modules. Rotary Actuators Electric Rotary Modules Rotary Actuators Electric Rotary Modules Rotary Actuators ROTARY ACTUATORS Series Size Page Miniature Rotary Actuators MRD-S 224 MRD-S 4 232 MRD-S 8 234 MRD-S 12 236 Explanation

More information

LINEAR ACTUATORS. Type S / SH 95, S / SH 80, S / SH 71, S / SH 56

LINEAR ACTUATORS. Type S / SH 95, S / SH 80, S / SH 71, S / SH 56 LINEAR ACTUATORS Type S / SH 95, S / SH 80, S / SH 71, S / SH 56 moving As one of the leading manufacturers of electrical and electronic drive components and systems we offer you a wide product range for

More information

SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission

SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc

More information

Mechanical flow switch for On/Off control

Mechanical flow switch for On/Off control Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...

More information

Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...

Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation... Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3

More information

Intelligent Pendulum Hardness Tester BEVS 1306 User Manual

Intelligent Pendulum Hardness Tester BEVS 1306 User Manual Intelligent Pendulum Hardness Tester BEVS 1306 User Manual Please read the user manual before operation. PAGE 1 Content 1. Company Profile... 3 2. Product Introduction... 3 3. Operation Instruction...

More information

Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor

Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings,

More information

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved

More information

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1. Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options

More information

W100L: Laser Sensor in Mini- Format

W100L: Laser Sensor in Mini- Format Product group W00 Laser Photoelectric proximity switch energ. Photoelectric reflex switch W00L: Laser Sensor in ini- Format Through-beam photoelectric switch Where applications demand it, the sensor can

More information

Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141

Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 16 bits singleturn Process value in 32 bit telegram 3 error bits 16 bits singleturn 15

More information

P2-HSI High-Speed Isolated Sinking/Sourcing Input. Connector Specifications

P2-HSI High-Speed Isolated Sinking/Sourcing Input. Connector Specifications WARNG: To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft

More information

Quick-disconnect cables. Adjustable mounting brackets

Quick-disconnect cables. Adjustable mounting brackets MiniSafe File No. LR90200 Operation MiniSafe 1.0 inch (25.4 mm) resolution 100 foot (30.5 m) range Individual Beam Indicator lights covered by U.S. and international patents Compact size 2.25 x 1.8 inches

More information

ENC - LKE51 - L I B

ENC - LKE51 - L I B ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance

More information

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL

More information

Model KBF 1020 Constant climate chambers with large temperature / humidity range

Model KBF 1020 Constant climate chambers with large temperature / humidity range Model KBF 1020 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate

More information

Solid-State Digital Timer

Solid-State Digital Timer Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation

More information

Safety Light Curtain Orion1 Extended

Safety Light Curtain Orion1 Extended Safety Light Curtain is an easy to use light curtain with compact dimensions. It has two resolutions for detection of fingers and hands, and comes with advanced features like cascading, muting and blanking.

More information

GB-ER series. Direct connection to LH70/71 series

GB-ER series. Direct connection to LH70/71 series GB-ER series Direct connection to LH70/71 series 21/12/2007 Product comparison GB-A series Cable length : 3m, 5m, 10m Waterproof connector CH01 Multi-gap head PM output Up/Down output GB-ER series Cable

More information

Product Data Sheet

Product Data Sheet Product Data Sheet www.moteck.com Actuator ID11 ID11 is designed for industrial applications, such as agricultural and construction machines. Comparing with ID1, the installation length of ID11 is 4mm

More information

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price

More information

7 SegmneDisplay Unit With High Bright Characters (D1SC-N : W32 H57mm, D1SA Series: W11 H22mm)

7 SegmneDisplay Unit With High Bright Characters (D1SC-N : W32 H57mm, D1SA Series: W11 H22mm) SC-N/SA Series 7 Segment Display Unit 7 SegmneDisplay Unit With High Bright Characters (SC-N : W32 H57mm, SA Series: W H22mm) Features Selectable decimal (0 to 9) or hexadecimal (0 to 9, A to F) indication

More information

Hardware Guide BrightSign, LLC Version:.1 Los Gatos, CA, USA. MODELS: XD Product Line

Hardware Guide BrightSign, LLC Version:.1 Los Gatos, CA, USA. MODELS: XD Product Line Hardware Guide BrightSign, LLC Version:.1 Los Gatos, CA, USA MODELS: XD Product Line Contents Overview... 1 Block Diagram... 2 Ports... 2 XD230... 2 XD1030... 2 XD1230... 3 Power Connector... 3 Ethernet...

More information

Model KBF P 240 Humidity test chambers with ICH-compliant light source

Model KBF P 240 Humidity test chambers with ICH-compliant light source Model KBF P 240 Humidity test chambers with ICH-compliant light source The KBF P humidity test chamber, equipped with ICH-compliant light source, is an expert when it comes to photostability tests and

More information

Product Data Sheet 4656 EZ

Product Data Sheet 4656 EZ The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE

More information

SPECIFICATION NO NOTE

SPECIFICATION NO NOTE NOTE The Model 207-1 is a special version of the standard M-207 Power Supply. It has been altered for a special applications requiring low current operation at high arc voltages in ambient and pressurized

More information

Product Data Sheet 4656 ZW

Product Data Sheet 4656 ZW The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE

More information

10 SERIES. Light dependent relays A

10 SERIES. Light dependent relays A 10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact

More information

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs

GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs control motion interface GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs GV 480 / GV 481 Impulse Splitters for Incremental Encoders with all-around

More information

Quick Operation Guide of LTN7700/7600 Series NVR

Quick Operation Guide of LTN7700/7600 Series NVR Quick Operation Guide of LTN7700/7600 Series NVR UD.6L0202B0042A02 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable

More information

Magnecraft Power Relays

Magnecraft Power Relays Description DPST-NO, 30 A; DPDT, 30 A (NO) / 3 A (NC) Description The series power relays offer a small package size and features Class F insulation for a maximum coil temperature of 55 C (3 F). These

More information

Agilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet

Agilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet Agilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical power of laser

More information

I/A Series Hardware Fiber Optic LAN Converter

I/A Series Hardware Fiber Optic LAN Converter I/A Series Hardware PSS 21H-7F3 B4 The provides bidirectional conversion between coaxial and fiber optic media. The converter is compatible with existing I/A Series system hardware, utilizes industry standard

More information