UFO compact - Signal processing system

Transcription

1 UFO UFO compact - Signal processing system

2 Contents General information 3 Module carriers 4-5 Front cover, Amplifier set 6 Control unit, splitter 7 Twin Sat-TV channel unit 8 Sat-TV channel unit 9 DVB transcoder QPSK-PAL 10 Twin DVB transcoder QPSK-PAL Common Interface retrofit sets, CA module 13 Twin DVB transcoder QPSK-FM 14 DVB-S(2)-QAM transmodulator 15 Twin DVB-S(2)-QAM transmodulator 16 DVB-S(2) transmodulator/multiplexer 17 Transmodulator DVB-S(2)-COFDM 18 Twin DVB-T transcoder COFDM-PAL 19 Twin DVB-T transmodulator COFDM-QAM 20 TV converters 21/23 DVB-T/TV converters 22 FM range amplifier 24 Twin FM converter 25 Twin FM modulator 26 Twin TV modulator 27 TV modulator 28 Data bus de-multiplexer 29 Software support frame 31 Accessories for the 19 frame module rack 32 System example 33 Technical appendix C/N on output UAS 484/EAS S/N on output of PAL modules 3. coupling 4. Headend system data Catalogue and special brochures 36 2

3 General information With the UFO compact signal processing system, Kathrein offers an economical and technically well-proven headend to process analogue and digital radio and TV programmes. Installation of the headend is extremely simple. The various module carriers available are dimensioned to enhold either four or twelve signal processing modules and are completely pre-mounted and cabled. The control unit is simply connected to the processing module to be tuned using the attached connection cable. The processing modules only have to be inserted, connected and fi nally programmed as required. The UFO compact system can be quickly set up and pre-programmed by the antenna specialist before delivery to the installation site. All standard tuning parameters can be set using the control unit (available separately).the power supply unit integrated in the module carriers provides all necessary supply voltages. Power supply to the individual modules is undertaken using fl exible power supply leads. LNB powering is carried out using a remote feed diplexer (please order separately). UFO compact components: Module carriers for 4 modules for wall-mounting Module carriers for 12 modules for installation in 19 cabinets or for wall mounting Control units to programme the modules Analogue Sat-TV channel modules DVB transcoders DVB transmodulators TV modulators FM modulators Data bus de-multiplexer Common Interface (CI) retrofi t sets 4-way input splitter Software 19 installation accessories Analogue TV and DVB-T converters Accessories for on-wall installation in free-access areas FM range amplifi er and FM converters UFO compact fulfi lls the requirements of the standards EN and EN and is CE and Class A certifi ed. 3

4 Module carriers UFG Module carrier with 4 insert positions Completely pre-assembled, with power supply unit, output coupler and cabling (when used in satellite reception systems, LNB remote feeding and input distribution must be disassociated) Galvanised sheet steel housing, with a detachable, lockable front cover of coated aluminium For indoor installation Note: Dimensions (W X H x D) in mm: 310 x 325 x 260 Packing unit/weight (pc./kg): 1/5.6 Some new channel units (e.g. UFO 372/TP) have a higher current. Please observe the maximum permissible load of the power supply unit. UFG Module carrier with 12 insert positions Designed for installation in 19 cabinets (e.g. the Kathrein TUG 100) and for wall-mounting (front cover UFZ 412/D can be ordered separately, if required) Completely pre-assembled, with power supply, extractor fans, output couplers, input splitters and cabling (if required, amplifi er set UFZ 412/V with WFS 27 remote feed diplexer and post-amplifi er can be ordered separately) Suffi cient heat dissipation is ensured using two extractor fans, allowing installation also in non-acclimatised rooms or in fully occupied 19 cabinets Designed to also allow integration of the data bus de-multiplexer UFX 314 Module carrier of galvanised steel Unit of height: 9 UH For indoor installation Dimensions (W X H x D) in mm: 483 x 408 x 350 (19 installation depth: 265) Packing unit/weight (pc./kg): 1/12.5 4

5 Module carriers Module carrier UFG 404 UFG of mounting Wall mounting Insertion in 19 cabinets and wall mounting ¹ ) Insert positions for single or twin modules 4 12 data frequency range MHz /950-2, /950-2,150 splitter terr./sat - 3 x 4-way ² ) Connection loss (per 4-way splitter) Terr./Sat db - 16 Through loss (per 4-way splitter) Terr. Sat db Remote feeding for LNB supply V/mA - 18/max. 600 data frequency range MHz coupler 1 x 4-way 3 x 4-way on 1 x 3-way Tap loss db Typ. 7.5 Typ. 14 Operational output level PAL 3) 64 QAM 256 QAM FM dbµv Power supply unit Mains voltage V/Hz / /47-63 Max. power consumption W < Secondary voltage/max. permissible current A 5 V/ V/ V/ V/ V/ V/ V/0.11 Overload signalling (red LED) (max. permissible secondary power) W General Fan - 2 Max. power consumption fan W - 2 x 13 Ambient temperature range C -20 to to +50 1) For wall mounting, the UFZ 412/D front cover ( ) and the amplifi er set UFZ 412/V ( ) are additionally available ² ) Extendable with UFZ 300 3) The operational output level of the UFO 394 is lower by 4 db 5

6 Front cover UFZ 412/D Front cover fi ts UFO compact base unit UFG 412 Made of galvanised and coated sheet steel Detachable and sealable Only required if the base unit is to be protected against unauthorised access Dimensions (W X H X D) in mm with UFG 412: 505 x 435 x 360 Packing unit/weight (pc./kg): 1/3.0 Amplifier set UFZ 412/V Amplifi er set suitable for UFO compact base unit UFG 412 Comprises: UFO compact post-amplifi er Gain: 24 db - Max. output level: 100 dbµv WFS 27 remote-feed diplexer RF connection cables (2 units) Packing unit/weight (pc./kg): 1/0.35 6

7 Control unit UFG Intelligent manual control unit to program the standard setting parameters of the UFO compact modules. LCD, 4 lines and 20 characters per line for display of settings and operating parameters 12 ergonomically arranged function buttons with indelible printing for entering the channel unit parameters Direct input of alphanumerical characters is possible Spiral cable, 1.4 m long, non-kinking, 6-pin mini DIN plug for connection to modules USB interface for software update via PC Language change-over German/ English/French/Spanish Power supply (5 V/100 ma) to control unit is undertaken by modules Protection category: IP 50 according to EN Ambient temperature range: +5 to 50 C Dimensions (W X H X D) in mm without cable: 220 x 75 x 25 Packing unit/weight (pc./kg): 1/0.6 splitter, 4-way UFZ To extend the number of inputs per polarisation or to refi t a system with an additional Sat level One input, four outputs and a loopthrough output to connect another UFZ 300 or an already existing input splitter In combination with input splitters that are already integrated, it enables any H/V splitting Easy to refi t Frequency range: 47-2,150 MHz Distribution loss: 16 db Splitting loss terr./sat: 2.5/3.5 db Dimensions (W x H x D) in mm without cable: 154 x 63 x 40 Packing unit/weight (pc./kg): 1/0.3 7

8 Twin Sat-TV channel unit UFO To receive two satellite programmes in PAL with analogue audio subcarriers Two channel units are integrated in one module Optionally one or two input(s) (settable via the central control unit) The two output channels are fi xed adjacent channels All essential transmission parameters can be set via the central control unit One channel unit (channel unit A) can be connected to an external decoder levels can be commonly set and individually switched off via the central control unit Adjacent channel compatible Stereo TV sound. Integrated data line decoder for automatic recognition of and switching to mono, stereo or 2-tone programmes Black screen video signal to transmit a radio programme on a TV channel (satellite signal required for black screen signal generation) TV standards B/G, D/K or I settable via the central controller C band compatible (settable via the central control unit) Required central control unit software version: at least V 8.01 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.8 UFO Frequency range (MHz) 920-2, level ¹ ) FM threshold (static) Signal-tonoise ratio ³ ) S/N weighted Audio subcarrier frequency Audio-IF bandwidth main/sub Video/audio carrier level spacing T1/T2 Max. output level ² ) / setting range Decoder interface (dbµv) (db) (db) (MHz) (khz) (db) (dbµv) (V/mA) /110 15/20 95/ x 5/1, /460 31/9 ¹ ) On input channel unit; observe input splitting loss ² ) In acc. with EN , 54 db IM (equivalent to DIN K) ³ ) annel unit s intrinsic value 8

9 Sat-TV channel unit UFO Converts a satellite TV programme with analogue audio subcarrier into an analogue PAL-TV programme (B/G, D/K or I standard) Designed for larger networks with increased system requirements The whole channel unit is integrated in one module One module is required per programme Two inputs A/B, settable via the central control unit (e.g. for H/V switching) All essential transmission parameters can be set via the central control unit Audio/video interface (15-pin SubMin-D socket) Stereo TV modulator, adjacent channel compatible Built-in data line decoder for automatic recognition of and switching in mono, stereo or 2-tone programmes Black screen video signal to transmit a radio programme on a TV channel (satellite signal required for black screen signal generation) C-band compatible (settable via the central control unit) Required central control unit software version: at least V 8.00 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight: 1/0.7 kg UFO Frequency range (MHz) 920-2, / level FM threshold (static) Signal-tonoise ratio ¹ ) S/N weighted Audio subcarrier frequency Audio-IF bandwidth main/sub Max. output level/setting range Video/audio carrier level spacing T1/T2 (dbµv) (db) (db) (MHz) (khz) (dbµv) (db) (V/mA) / /110 95/ /20 5/ /340 31/9 ¹ ) annel unit s intrinsic value at 25/16 MHz deviation, > 60 dbµv input level 9

10 DVB transcoder QPSK-PAL UFO DVB-Sat channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transcodes a TV or radio programme from a QPSK-modulated Sat-transponder into an analogue PAL-TV channel TV standards: B/G, D/K or I Specifi cally for larger system with increased system requirements Two inputs A/B, settable via the central control unit (e.g. for H/V switching) All essential transmission parameters can be set via the central control unit TV or radio programmes from the received transponder can directly be chosen due to text shown on the control unit s display Up to 10 TV programmes/transponder and 32 accompanying sounds/tv programme or 255 radio programmes can be processed Wide-screen signalling (WWS) so that broadcasts transmitted in 16:9 format are correctly displayed on wide-screen TV sets Automatic format recognition (4:3 or 16:9). In 16:9 reception, optional Letterbox or Pan & Scan conversion The output level can be set and switched off via the control unit Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC) Switchable audio/video port (15-pin SubMin-D socket) Adjacent channel compatible Videotext and VPS insertion Audio modes: mono, stereo, dual-/2- tone, dual-a, dual-b (if two different audio signals are transmitted on one audio-pid) DVB and teletext subtitling (a control unit with a software version of at least V 9.20 is required) Teletext deactivation and LED display suppression (separate activation) Black screen video signal generation for radio on a TV channel, e.g. in hotels (satellite signal is required for black screen generation) Software updates via control unit s interface Radio text to show the station name or a user-defi ned text Can be extended with the UFZ 383 Common Interface retrofi t set to add a new CA module Readout and operation of the CAM menu and selection of the subtitle languages via the OSD of a test TV set Required central control unit software version: at least V 9.10 (for USW 30: at least V 3.10) Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.7 UFO Frequency range (MHz) level data rate Signal-tonoise ratio ³ ) S/N weighted Max. output level/setting range Video/audio carrier level spacing T1/T2 (dbµv) (MS/s) (db) (dbµv) (db) (V/mA) 950-2,150 ¹ ) 47-68/ ² ) / /20 5/ /480 31/9 ¹ ) Settable in 1 MHz steps and fi ne tuning via AFC ² ) Settable in the 7/8 MHz channel grid, fi ne tuning in the 250 khz raster ³ ) annel unit s intrinsic value (58 db with 48 channel units) 10

11 Twin DVB transcoder QPSK-PAL UFO DVB-Sat channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transcodes two TV or radio programmes of any transponder into two analogue PAL TV programmes (2 separate frontends) TV standards: B/G, D/K or I Two inputs A/B, settable via the central control unit (e.g. for H/V changeover) All essential transmission parameters can be set via the central control unit Direct selection of the TV or radio programmes of the received transponder by means of text displayed on the control unit Automatic format recognition (4:3 or 16:9). In case of 16:9 reception optional Letterbox or Pan & Scan conversion Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on widescreen TV sets (a control unit with software version V 9.10 is required) The two output channels are fi xed adjacent channels Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC) Adjacent channel compatible Videotext and VPS insertion Audio modes: mono, stereo, dual/2- tone, dual-a, dual-b (if two different audio signals are transmitted in one audio-pid) Radio text to show the station name or a user-defi ned text (a control unit with software version V 9.10 is required) DVB and teletext subtitling (for this, a control unit with software version V 9.20 or higher is required) Teletext deactivation and LED display suppression (separate activation; a control unit with software version V 9.10 is required) Black screen video signal generation to insert a radio programme into a TV channel, e.g. in hotels (possible on both channels; DVB-T signal is required to generate black screen video signal) Software updates via control unit s interface Ambient temperature range for operation in: - module carrier with extraction fan (UFG 412): -20 to +50 C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 C Packing unit/weight (pc./kg): 1/0.7 The levels of the two output channels can be commonly set and individually switched off via the control unit Required central controller software version: at least V 8.80 Dimensions (W x H x D) in mm: 265 x 27 x 170 A DVB-S Frontend FPGA Twin MPEG 2 / PAL ZF- Mod ZF HF B DVB-S Frontend ZF- Mod UFO Frequency range (MHz) level data rate Signal-tonoise ratio ³ ) S/N weighted Max. output level/setting range Video/audio carrier level spacing T1/T2 (dbµv) (MS/s) (db) (dbµv) (db) (V/mA) 950-2,150 ¹ ) ² ) / /20 5/ /600 31/3 ¹ ) Settable in 1 MHz steps, fine tuning via AFC ² ) Settable in the 7/8 MHz channel grid, fi ne tuning in the 50 khz raster ³ ) annel unit s intrinsic value 11

12 Twin DVB transcoder QPSK-PAL UFO DVB-S channel unit for for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transcodes two TV or radio programmes from one transponder into two analogue PAL-TV programmes TV standards: B/G, D/K or I Two inputs A/B, settable via the central control unit (e.g. for H/V switching) DiSEqC TM 1.0 for control of external multi-switches All essential transmission parameters can be set via the central control unit Direct selection of TV or radio programmes of the received transponder as their names are displayed on the control unit Automatic format recognition (4:3 or 16:9). In 16:9 reception optionally Letterbox or Pan & Scan conversion Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on widescreen TV sets The two output channels are individually settable The levels of the two output channels can be commonly set and individually switched off via the control unit Adjacent channel compatible Videotext and VPS insertion Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC) Switchable audio/video interface (15- pin SubMin-D socket) in channel unit twin-a DVB and teletext subtitling Teletext deactivation and LED display suppression (separate activation) Audio modes: mono, stereo, dual/ 2-tone, dual-a, dual-b (if two different audio signals are transmitted in one audio-pid) Black screen video signal generation to insert a radio programme into a TV channel, e.g. in hotels (possible on both channels; satellite signal is required for black screen generation) Radio text to show the station name or a user-defi ned text Software updates via control unit interface Extendable with the UFZ 394 Common Interface retrofi t set to add two CA modules Readout and operation of the CAM menu and selection of the subtitle languages via the OSD of a test TV set Required central control unit software version: at least V 9.30, for USW 30 software: at least 3.3 Dimensions (W x H x D) in mm: 265 x 27 x 170 Ambient temperature range for operation in: - module carrier with extraction fans (UFG 412): -20 to +50 C - (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 C Packing unit/weight (pc./kg): 1/1.0 DVB-S Frontend CI (UFZ 394) FPGA Twin MPEG 2 / PAL ZF- Mod ZF- Mod ZF ZF HF HF UFO Frequency range (MHz) level data rate Signal-to-noise ratio ³ ) S/N weighted Max. output level/setting range Video/audio carrier level spacing T1/T / (dbµv) (MS/s) (db) (dbµv) (db) (V/mA) 950-2,150 ¹ ) ² ) / /20 5/ /600 31/9 ¹ ) Settable in 1 MHz steps and fi ne tuning through AFC ² ) Settable in the 7/8 MHz channel raster, fi ne tuning in the 50 khz raster ³ ) annel unit s intrinsic value (57.5 db with 48 channel units) 12

13 Common Interface (CI) retrofit set UFZ Common Interface (CI) retrofi t set, for insertion of a CA module Suitable for the UFO 382 and UFO 391 DVB-S transcoders and the UFO 353 DVB-T transcoder Re-fi tting can easily be carried out by the specialised dealer Packing unit/weight (pc./kg): 1/0.1 Common Interface (CI) retrofit set UFZ Common Interface (CI) retrofi t set, for insertion of two CA modules To retrofit suitable UFO compact processing units (see unit descriptions to check compatibility) Re-fi tting can easily be carried out by the specialist dealer Power input e.g. via 2 x AlphaCrypt CA modules: 12.5 V/160 ma, 5 V/70 ma Packing unit/weight (pc./kg): 1/0.25 SC SC CAM CAM CI-Board CA module AlphaCrypt Light UFZ For DVB-S and DVB-C receivers For UFOcompact processing units with a CI retrofi t-kit Integrated juvenile protection function Software update via satellite 13

14 Twin DVB transcoder QPSK-FM UFO DVB radio channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transcodes two DVB-S radio programmes from one transponder into two standard FM stereo radio programmes The whole channel unit is integrated in one module One module is required for two channels Two inputs A/B, settable via the central control unit (i.e. for H/V switching) The two output channels can be set individually The levels of the two output channels can be set and switched off via the control unit RDS function for station name display in RDS suitable FM receivers (standard-conforming extraction from data stream or manual entry) Software updates via control unit s interface Required central control unit software: at least V 8.00 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.7 All essential transmission parameters can be set via the central control unit UFO Frequency range (MHz) 950-2, level data rate Sum distortion attenuation Disturbing voltage ratio ¹ ) Crosstalk attenuation Max. output level/setting range (dbµv) (MS/s) (db) (db) (db) (dbµv) (V/mA) / / /500 31/6 ¹ ) annel unit s intrinsic value 14

15 DVB-S(2)-QAM transmodulator UFO 371/TP DVB-S/HDTV channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process the signals of a DVB-S transponder or a HDTV transponder in CATV systems Transmodulates a QPSK modulated DVB-S signal or 8PSK modulated DVB-S(2) signal into a QAM modulated output signal The whole channel unit is integrated in one module Two inputs A/B, settable via the central control unit (e.g. for H/V switching and to create the cable-nit for two polarisations) DiSEqC TM 1.0 to control external multi-switches All essential transmission parameters can be set via the central control unit The output level can be set and switched off via the control unit Adjacent channel compatible Software updates via control unit interface MPEG transport stream processor: To set a constant output data rate (Stuffi ng) with PCR correction With programme filter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; additionally UFX 31x is required) For CAT matching, e.g. to set the operator-id QAM modulator for 16/32/64/128/ 256 QAM (factory setting: 64 QAM) MPEG transport stream processor and QAM modulator as an FPGA solution with outstanding MER and shoulder attenuation values Extendable with UFZ 394 Common Interface retrofi t set to add two CA modules Required central control unit software version: at least V 9.30 Ambient temperature range for operation in: - module carrier with extraction fans (UFG 412): -20 to +50 C - (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 C Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.7 UFO 371/TP Frequency range (MHz) level data rate data rate ³ ) Modulation Error Rate MER Max. output level level setting range / (dbµv) (MS/s) (MS/s) (db) (dbµv) (dbµv) (V/mA) 950-2,150 ¹ ) ² ) (DVB-S) 2-30 (DVB-S2) (QAM 256) 85 (QAM 64) (QAM 256) (QAM 64) 5/ /750 31/7 ¹ ) Settable in 1 MHz steps ² ) Settable in the 8 MHz raster, fine tuning in the 250 khz raster ³ ) Settable (Stuffi ng) 15

16 Twin DVB-S(2)-QAM transmodulator UFO 372/TP Twin DVB-S/HDTV channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process the signals of two DVB-S transponders or two HDTV transponders in CATV systems Transcodes two QPSK modulated DVB-S signals or two 8PSK modulated DVB-S(2) signals into two QAM modulated output signals The whole channel unit is inserted in one module Two inputs A/B, settable via the central control unit (e.g. for H/V switching and to create the cable-nit for two polarisations) DiSEqC TM 1.0 to control external multi-switches All essential transmission parameters can be set via the central control unit MPEG transport stream processor: To set a constant output data rate (Stuffi ng) with PCR correction With channel fi lter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (cable NIT; additionally UFX 31x is required) For CAT matching, e.g. to set the operator ID QAM modulator for 16/32/64/128/ 256 QAM (factory setting: 64 QAM) MPEG transport stream processor and QAM modulator as an FPGA solution with outstanding MER and shoulder attenuation values Ambient temperature range for operation in: - module carrier with extraction fans (UFG 412): -20 to +50 C - (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 C The two output channels can be individually set The two output levels can be commonly set or individually switched off via the control unit Adjacent channel compatible Software updates via control unit interface Required central control unit software version: at least V 9.30 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0 A B DVB-S(2) Frontend DVB-S(2) Frontend FPGA Twin MPEG 2 / QAM ZF- Mod ZF- Mod ZF HF HF ZF UFO 372/TP Frequency range (MHz) level data rate data rate ³ ) Modulation Error Rate MER Max. output level level setting range / (dbµv) (MS/s) (MS/s) (db) (dbµv) (dbµv) (V/mA) 950-2,150 ¹ ) ² ) (QAM 256) 85 (QAM 64) (QAM 256) (QAM 64) 5/1, /760 31/7 ¹ ) Settable in 1 MHz steps ² ) Settable in the 8 MHz raster, fine tuning in the 250 khz raster ³ ) Settable (Stuffi ng) 16

17 DVB-S(2) transmodulator/multiplexer UFO 373/MX DVB-S/HDTV channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process signals from two DVB- Sat (or HDTV) transponders into a QAM modulated output signal Enables selection of individual programmes from two QPSK modulated DVB-S signals (or 8PSK modulated DVB-S(2) signals), multiplexing of both transport streams and transmodulation of these into a QAM modulated output channel The whole channel unit is integrated in one module Two inputs A/B, settable via the central controller (e.g. for H/V switching and to create the cable- NIT for two polarisations) DiSEqC TM 1.0 to control external multi-switches All essential transmission parameters can be set via the central control unit The output level can be set and switched off via the controller Adjacent channel compatible Software updates via control unit interface MPEG transport stream processor: To set a constant output data rate (Stuffing) with PCR correction With programme fi lter to remove individual TV and radio channels (easy setting using the USW 30 and UFX 31x) For NIT conversion (cable NIT; UFX 31x is additionally required) For CAT conversion (insertion of an operator ID) Origin of EPG data can be switched between input A and input B (as of software version V 04) QAM modulator for 16/32/64/128/ 256 QAM (factory setting: 64 QAM) MPEG transport stream processor and QAM modulator based on a FPGA design with outstanding MER and shoulder attenuation values Extendable with UFZ 394 Common Interface retrofi t set for insertion of two CA modules (input A; as of software version V 02) Ambient temperature range for operation in: - module carrier with extraction fans (UFG 412): -20 to +50 C - (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 C Required central controller software version: at least V 9.30 (CI functionality as of V 9.31) Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0 A B DVB-S(2) Frontend DVB-S(2) Frontend CI (UFZ 394) FPGA MUX MPEG 2 / QAM ZF- Mod ZF HF UFO 373/MX Frequency range (MHz) level data rate data rate ³ ) Modulation Error Rate MER Max. output level level setting range / (dbµv) (MS/s) (MS/s) (db) (dbµv) (dbµv) (V/mA) 950-2,150 ¹ ) ² ) (QAM 256) 85 (QAM 64) (QAM 256) (QAM 64) 5/1, /700 31/7 ¹ ) Tuning in 1 MHz increments ² ) Tuning in an 8 MHz raster, fi ne tuning in 250 khz increments ³ ) Settable in the operational mode Stuffi ng 17

18 Transmodulator DVB-S(2)-COFDM UFO 331/TP DVB-S/HDTV channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process the signals of a DVB-S transponder or a HDTV transponder in community antenna systems Transmodulates a QPSK modulated DVB-S signal or 8PSK modulated DVB-S2 signal into a COFDM modulated output signal (programme fi ltering required for adjustment to the max. output data rate) The whole channel unit is integrated in one module Two inputs A/B, adjustable via central control unit (e.g. for H/V switching) DiSEqC TM 1.0 to control external multi-switches All essential transmission parameters can be set via the central control unit The output level can be set and switched off via the control unit Adjacent channel compatible MPEG transport stream processor: To set a constant output data rate (stuffi ng) with PCR correction With programme filter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x) For NIT matching (Cable NIT; UFX 31x additionally required) For CAT matching, e.g. to set the operator ID COFDM modulator for modulation type 2k, mapping QPSK, 16 QAM, 64 QAM MPEG transport stream processor and COFDM as an FPGA solution Software updates via control unit interface Extendable with UFZ 394 Common Interface retrofi t set to add two CA modules Required central control unit software version: at least V 9.32 Ambient temperature range for operation in: - module carrier with extraction fans (UFG 412): -20 to +50 C - (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 C Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.85 Temporary data; subject to change UFO 331/TP Frequency range (MHz) level data rate COFDM modes Modulation Error Rate MER Max. output level Setting range output level / (dbµv) (MS/s) (db) (dbµv) (dbµv) (V/mA) 950-2,150 ¹ ) ² ) K K (DVB-S) 2-30 (DVB-S2) QPSK 16 QAM 64 QAM 33.5 (< 400 MHz) 32 (> 400 MHz) / /750 31/7 ¹ ) Settable in 1 MHz steps ² ) Settable in 6/7/8 MHz raster, fi ne tuning in the 250 khz raster 18

19 Twin DVB-T transcoder COFDM-PAL UFO DVB-T channel unit for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transcodes two TV or radio programmes from a COFDM modulated DVB-T channel into two analogue PAL TV programmes TV standards: B/G, D/K or I All essential transmission parameters can be set via the central controller Direct selection of TV or radio programmes from the received DVB-T channel due to text shown on the controller display Automatic format recognition (4:3 or 16:9). In 16:9 reception choice of either Letterbox or Pan & Scan conversion Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on wide-screen TV sets Both output channels can be set individually Both output levels can be individually set or switched off via the control unit Switchable audio/video interface (15-pin SubMin D socket) in the twin-a channel unit Adjacent channel compatible Videotext and VPS insertion Audio modes: mono, stereo, dual/ 2-tone (if two different audio signals are transmitted on one audio-pid) DVB and teletext subtitling Teletext deactivation and LED display suppression (separate activation) Black screen generation for radio on a TV channel, e.g. in hotels (possible in both channels; DVB-T signal is required for black screen generation) Radio text to show the broadcaster name or a user-defi ned text Software updates via control unit s interface Can be extended with Common Interface retrofi t set UFZ 394 to accommodate two CA modules Read-out and operation of CAM menu using the OSD of a test TV set Required central control unit software version: as of V 9.31 Dimensions (W x H x D) in mm: 265 x 27 x 170 Permissible ambient temperature for operation in: - module carrier with extraction fan (UFG 412): -20 to +50 C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 C Packing unit/weight (pc./kg): 1/0.7 DVB-T Frontend CI (UFZ 394) Twin MPEG 2 / PAL ZF- Mod ZF- Mod ZF ZF HF HF UFO Frequency range (MHz) level Signal-to-noise ratio ³ ) S/N weighted Max. output level level setting range Video/audio carrier level spacing T1/T2 (dbµv) (db) (dbµv) (dbµv) (db) (V/mA) ¹ ) / ² ) /20 5/ /600 31/9 ¹ ) Settable in the 6/7/8 MHz channel plan, fi ne tuning in 100 khz steps ² ) Settable in the 7/8 MHz channel plan, fi ne tuning in 50 khz steps ³ ) annel unit s intrinsic value 19

20 Twin DVB-T transmodulator COFDM-QAM UFO 357/TP Twin DVB-T transmodulator for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Transmodulates two COFDM modulated DVB-T signals into two QAM modulated output signals Two channel units are integrated in one module Two inputs (input A for channel unit twin I, input B for channel unit twin II) All essential transmission parameters can be set via the central control unit Both output channels can be set individually Both output levels can be individually set or switched off via the control unit Adjacent channel compatible MPEG transport stream processor and QAM modulator as an FPGA solution with with outstanding MER and shoulder attenuation values MPEG-Transportstrom-Prozessor und QAM-Modulator als FPGA- Lösung mit herausragenden Werten für MER und Schulterdämpfung MPEG 2 transport stream processor: To set a constant output data rate (Stuffi ng) with PCR correction With programme filter to remove individual TV and radio programmes (more convenient setting using the USW 30 and UFX 31x) For NIT matching (Cable NIT; UFX 31x additionally required) For CAT matching, e.g. to set the operator ID QAM modulator for 16/32/64/128/256 QAM (factory setting: 64 QAM) Software updates via control unit interface Permissible ambient temperature for operation in: - module carrier with extraction fan (UFG 412): -20 to +50 C - (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 C Required central controller software version: as of V 9.31 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/1.0 A DVB-T Frontend FPGA Twin MPEG 2 / QAM ZF- Mod ZF HF B DVB-T Frontend ZF- Mod HF ZF UFO 357/TP Frequency range (MHz) level COFDM modes data rate ³ ) Modulation Error Rate MER Max. output level Setting range output level (dbµv) (MS/s) (db) (dbµv) (dbµv) (V/mA) ¹ ) / ² ) (16 QAM) (64 QAM) 2 k, 8 k (QAM 256) 85 (QAM 64) (QAM 256) (QAM 64) 5/ /750 31/7 ¹ ) For channel unit twin I and twin II, frequency range input independently settable in 6/7/8 MHz steps, fi ne-tuning in 100 khz steps ² ) Settable in 8 MHz steps; fine tuning in 250 khz steps ³ ) Settable (Stuffi ng) 20

21 TV converters UFO 320 UFO TV converters for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To convert terrestrial TV programmes (B/G standard) and output channel can be set via the central control unit High degree of selection due to conversion via IF Any combination other than cochannel combination is possible Adjacent channel compatible AGC for automatic input level control Required central control unit software version: at least V 6.40 Dimensions (W x H x D) in mm: 265 x 27 x 120 Packing unit/weight (pc./kg): 1/0.5 Frequency range (MHz) level Signal-tonoise ratio ³ ) S/N weighted Max. output level/ setting range ¹ ) Noise figure ² ) (dbµv) (db) (dbµv) (db) (V/mA) UFO / / /110 31/5 UFO / / /110 31/5 ¹ ) To EN /point 3.1, 54 db IMod (DIN K) ² ) At maximum gain ³ ) With input level > 80 dbµv 21

22 DVB-T TV converters UFO 351 UFO TV converters for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To convert terrestrial DVB-T and analogue PAL programmes (B/G, D/K or I standard) channel and output channel can be set via the central control unit High degree of selection due to conversion via IF Any channel combination possible (also co-channel conversion) Suitable as channel amplifi er for DAB (co-channel conversion 12-12) Adjacent channel compatible AGC for automatic input level control Required central control unit software version: at least V 7.20 Dimensions (W x H x D) in mm: 265 x 27 x 120 Packing unit/weight (pc./kg): 1/0.5 Note on UFO 352: When DVB-T signals are converted from UHF to VHF, the 8 MHz bandwidth is retained. Frequency range (MHz) Frequency range level Signal-tonoise ratio ² ) S/N weighted Setting range output level Noise figure ¹ ) / (dbµv) (db) (dbµv) (db) (V/mA) UFO (PAL) (DVB-T) (PAL) (DVB-T) 7 5/ /180 31/8 UFO (PAL) (DVB-T) (PAL) (DVB-T) 7 5/ /180 31/8 ¹ ) At maximum gain ² ) For PAL at input level > 80 dbµv 22

23 TV converters UFO 352/DE UFO 352/DA TV converters for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To convert terrestrial TV programmes (standard: D/K) and output channel can be set via the central control unit High degree of selection due to conversion via IF Any channel combination possible (also co-channel conversion) Adjacent channel compatible AGC for automatic input level control Required central control unit software version: at least V 8.70 Dimensions (W x H x D) in mm: 265 x 27 x 120 Packing unit/weight (pc./kg): 1/ Frequency range (MHz) / level Signalto-noise ratio ² ) S/N weighted Setting range output level Noise figure ¹ ) (dbµv) (db) (dbµv) (db) (V/mA) UFO 352/DE / /120 31/8 UFO 352/DA / /120 31/8 ¹ ) At maximum gain ² ) For input level > 80 dbµv 23

24 FM range amplifier UFO FM range amplifi er for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx For broadband reception of FM programmes Dimensions (W x H x D) in mm: 265 x 27 x 120 Packing unit/weight (pc./kg): 1/0.4 Four individually adjustable notch fi lters to attenuate interfering signals UFO Frequency range (MHz) Gain Gain setting range Depth per wave trap Max. output level ¹ ) Noise figure (db) (db) (db) (dbµv) (db) (V/mA) > < /200 ¹ ) In accordance with EN , 66 db XMod (equivalent to DIN B) 24

25 Twin FM converter UFO Twin FM converter for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To selectively convert two FM programmes Twin module with one input and one output and output frequencies can be set via the central control unit level can be set and switched off via the control unit Frequency grid: input: 50 khz; output: 50 khz High degree of selection due to modulation via IF Any channel combination possible Adjacent channel compatible AGC for automatic input level control Required central control unit software version: at least V 8.00 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.7 Min. channel spacing on the output: 300 khz UFO Frequency range (MHz) level Sum distortion attenuation Noise voltage ratio ¹ ) Crosstalk attenuation Max. output level/setting range (dbµv) (db) (db) (db) (dbµv) (V/mA) > 45 > 58 > 30 95/ / /300 31/8 ¹ ) With input level > 60 dbµv 25

26 Twin FM modulator UFM Twin FM modulator for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process audio signals into two standard FM stereo radio programmes Two modulators integrated in one module Audio inputs: Cinch sockets All essential transmission parameters can be set via the central control unit The two output channels can be set separately Adjacent channel compatible (channel spacing: > 300 khz) RDS coder for the station name display in RDS compatible FM receivers (manual entry of the station name on the control unit or simplifi ed entry using USW 30 and UFX 31x) Required central control unit software version: at least V 8.40 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.7 Both output levels can be individually set and switched off via the control unit Frequency range (khz) Frequency range voltage Crosstalk attenuation Sum distortion attenuation Noise voltage ratio Disturbing voltage ratio Max. output level/setting range (MHz) (V) (db) (db) (db) (db) (dbµv) (V/mA) ) UFM L L R R ) / / /60 31/6 ¹ ) Settable in the 50 khz raster ² ) Settable in 4 steps (reference: FM nominal deviation ± 40 khz w/o pilot and RDS signal) 26

27 Twin TV modulator UFM Twin FM modulator for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx To process audio/video signals into standard TV signals Two modulators are integrated in one module AV inputs: SubMin D socket, 15-pole The two output channels are fi xed adjacent channels All essential transmission parameters can be set via the central control unit Both output levels can be commonly set and individually switched off via the control unit Adjacent channel compatible TV sound in stereo, mono or 2-tone; manually or automatically switchable via the data line decoder Integrated video signal generator (black screen), i.e. to transmit radio programmes on the two TV channels (independent switching between external and internal video signal possible) TV standard: B/G, D/K or I, settable via the central control unit Required central control unit software version: at least V 6.80 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.6 Note: An adaptor cable SubMin D to Cinch can be ordered from ESC Grassau under order number Audio Frequency range (MHz) Video voltage audio voltage video Signalto-noise ratio ¹ ) S/N weighted Video/audio carrier level spacing T1/T2 Max. output level/setting range (V eff ) (V ss ) (db) (db) (dbµv) (V/mA) UFM L L R R V V /22 95/ / /250 31/6 ¹ ) annel unit s intrinsic value 27

28 TV modulator UFM TV modulator for insertion into the UFO compact (extension) module carriers UFG 3xx/4xx Modulates an audio/video signal into a standard TV signal Specifi cally designed for larger systems with increased system requirements AV input: SubMin-D socket, 15-pole All essential parameters can be set via the central control unit signal level can be set and switched off via the control unit Adjacent channel compatible TV sound in stereo, mono or 2-tone; manually or automatically switchable using the data line decoder TV standards: B/G, D/K or I can be set with the central control unit Required central control unit software version: at least V 8.40 Dimensions (W x H x D) in mm: 265 x 27 x 170 Packing unit/weight (pc./kg): 1/0.6 Note: An adaptor cable SubMin-D to Cinch, order no , can be ordered from ESC Grassau. UFM Audio Frequency range (MHz) Video 1) 47-68/ L R V voltage audio voltage video Signal-tonoise ratio ² ) S/N weighted Video/audio carrier T1/T2 level spacing Max. output level/setting range (V eff ) (V ss ) (db) (db) (dbµv) (V/mA) /20 95/ / /220 31/5 ¹ ) Settable in the 7/8 MHz channel plan, fi ne tuning in 250 khz steps ² ) annel unit s intrinsic value 28

29 Data bus de-multiplexer UFX To centrally control all UFO compact channel units that are inserted into UFG 412 module carriers Each UFO compact module is individually connected to the UFX 314 with a control cable Required if the USW 30 software is used, for NIT matching (cable- NIT), programme fi ltering, and CAT processing with the UFO 3xx/TP DVB transmodulators Complete set incl. connection cable to the modules and fi xing material for the UFG 412 module carrier Can be refi tted on older UFO compact systems (from UFO 335/365 on; required control unit software version: at least V 9.20, with restrictions as of V 7.00) Control of the individual modules with the UFO compact control unit or PC/laptop plus USW 30 software Enables the remote control/remote maintenance of UFO compact systems by means of a modem and telephone circuit or of a LAN Local operation with UFO compact control unit Local operation via USB port by means of a PC/laptop plus USW 30 software Operation via Ethernet interface (locally or via LAN with TCP/IP protocol) by means of a PC/laptop plus USW 30 software A modem can be connected to the USB port of the UFX 314 via RS 232 interface by means of an RS 232 adaptor cable (recommended modems: see USW 30; recommended adaptor cable: adaptor with FTDI or prolifi c chip set) Up to 2,048 UFX 314 can be connected via one or more Ethernet splitters (switch/hub), and be commonly controlled in groups of 8 units each Power supply to the UFX 314 and the control unit that may be connected to it is effected through a separate connection from the UFG 412 power supply unit Supply voltage: 12.5 V : - Approx. 200 ma (without control unit and USB device) - Max. 900 ma (with control unit and USB device) Dimensions (W x H x D) in mm without cable: 384 x 23 x 81 Packing unit/weight (pc./kg): 1/0.7 29

30 Software USW Easy-to-use Java software for UFO compact signal processing systems that are equipped with the UFX 312 data bus de-multiplexer. Programming of all channel unit parameters via PC or laptop Programming of existing UFO compact systems via PC or laptop - all settings can be read out, saved and printed Saved programmings can be read into either new or back-up systems that are assembled in the same way Up to eight serially connected systems can be controlled at the same time Remote control/remote maintenance of UFO compact systems with PC or laptop via modem and telephone line or via a local area network (LAN) Recommended modems: Analogue: 3Com US Robotics 56k Message Modem or Devolo MicroLink 56k Fun II ISDN: Elsa MicroLink ISDN/TLV.34 GSM: Siemens M35 Photorealistic on-screen display of the UFO compact system Clear representation of individual selections of a UFO compact system in fi le card systems Automatic recognition of the connected system Language change-over German/ English/French/Spanish System requirements hardware: Clock frequency at least 400 MHz 320 MB RAM and 90 MB hard disk space Graphics card (resolution: 1,024 x 768) System requirements software: Operating system: Microsoft Windows 98SE/ME/NT/2000/XP (Vista from version 3.2 on), Solaris, Linux Java Virtual Machine (JVM): at least Version (supplied) Delivery scope: CD, RS 232 null modem cable, USB cable, manual (on CD) 30

31 19 support frame TUG For headends installed in 19 cabinets Installation height/construction: 41 HU (= 2 m) Width: 60 cm, depth: 60 cm Dimensions (mm): 600 x 2,000 x 600 without glass door, 600 x 2,000 x 670 with glass door Packing unit/weight (pc./kg): 1/31 net Note: The ambient temperature limits for the UFG 3xx UFO compact (extension) module carriers must be considered should they be used! Additional cooling may be necessary. TUG 100 with ESO 06 and ZSO 210 Accessories for the 19 frame ESO Two side and rear panels for the TUG 100 Packing unit/weight (pc./kg): 1/37 net ZSO Glass door for TUG 100 Packing unit/weight (pc./kg): 1/19.7 net 31

32 Accessories for the 19 frame ZSO Front panel (1 HU) Packing unit/weight (pc./kg): 1/0.2 For cable passage and ventilation ZSO Front panel (1 HU) Packing unit/weight (pc./kg): 1/0.2 For cable passage and ventilation 19 module rack TGZ To mount the other headend components into TUG 100 Dimensions (mm): 483 x 267 x 198 (19, 6 HU) Packing unit/weight (pc./kg): 1/3.3 TGZ To mount EAX 24/26/28 and EBC 06/08 as splitters and couplers (e.g. in optical transmission and reception stations) Dimensions (W X H X D) in mm: 483 x 221 x 190 (19, 5 HU) Packing unit/weight (pc./kg): 1/2.9 TGZ 15 fitted 32

33 System example with 48 modules The example system is valid for both a wall-mounted system or for one in a 19 cabinet Passive coupling of the module carriers with subsequent amplifi - cation using the launch amplifi er VOS 135/G ensures that the system offers highest S/N (antenna dimensioning dependant) and optimal CTB/CSO parameters FM 5 Antenna example: CAS 120/124, CN in ASTRA reception in Munich 20.7 db A 1 A 2 A 3 A 4 FM KAZ 11 2 Further external IF-splitting using the EBC 10/13/14 VWS supplies the LNB and compensates any cable and splitting losses KAZ 11 is used for voltage surge protection and to provide a defi ned earthing point. With test socket -20 db 33

34 1. C/N on the output of UAS 484/EAS 484 * ) The data given are typical values, valid for transponder bandwidths of 27 MHz, e..g. for Astra 1 and for Eutelsat/Hotbird. The values are based on an over-site EIRP power of 52 dbw. Antenna - Feed system Band G/T db/k C/N Hamburg C/N Munich C/N Paris C/N London C/N Madrid C/N Milan CAS 09/90 - UAS 584 Low-band High-band 18,8 19,8 18,3 18,7 18,5 18,3 18,8 18,8 CAS 120/124 - UAS 484 Low-band High-band 22,0 23,0 21,5 21,9 21,7 21,5 22,0 22,0 CAS 120/124 - EAS 484 Low-band High-band 20,6 21,6 20,0 20,5 20,2 20,2 20,2 20,2 CAS EAS 484 Low-band High-band 23,8 24,8 23,3 23,7 23,4 23,4 23,4 23,4 * ) Astra 1 and Eutelsat reception Due to the high transmission power, when using an antenna > 1.2 m in diameter the LNB could be over-loaded (intermodulation products would then reduce the C/N) We recommend using the professional quatro feed system EAS 484 with antennas > 1.2 m in diameter. Note: EN specifi es minimal C/N requirements for headends (not including system reserves): 15 db for analogue signal processing 12 db for digital signal processing S/N on output of analogue (CCIR B/G, PAL) output modules No. of programmes S/N on output (db) UFM ,0 57,5 55,4 53,4 51,0 UFM ,0 58,2 58,1 58,0 58,0 UFO ,0 58,2 58,1 58,0 58,0 UFO ,0 57,5 55,4 53,4 51,0 UFO ,0 58,2 58,1 58,0 58,0 UFO ,0 57,5 55,4 53,4 51,0 UFO ,0 57,6 57,5 57,5 57,5 Notes: If different analogue (PAL) modules are combined together in a system, then the lowest given S/N ratio in the above table for any one of the modules in this combination will apply as the overall valid S/N ratio. (e.g. 8 x UFM 340 and 8 x UFO 391 the value given for the UFM 340 for 24 channels will be valid The output signal and noise levels of QPSK-QAM and COFDM-QAM transmodulators are 10 db (with 64 QAM) or 4 db (with 256 QAM) lower than the signal levels of analogue signals, and therefore only insignifi cantly influence the signal to noise ratio of the analogue signals 34

35 3. coupling 3.1 Module carrier UFG 412 with wall mounting set UFZ 412 and integrated output amplifier amplifier system data level (dbµv) C/N (db) S/N (db) IM 2 (db) IM 3* ) (db) 12 modules , * ) 24 channel load 3.2 Passive coupling of carriers (without integrated launch amplifier) and external launch amplifier VOS 135/G Standard coupling method for UFO compact module carrier UFG 412 Coupling with UFG 412 No. of modules Max. possible output level (dbµv) EBC 02 2 x (106) *) EBC 03 3 x (104) *) EBC 04 4 x (103) *) * ) UFO VOS 135/G system data Signal to noise and disturbance ratios dependent on the possible output levels Select the appropriate output level for a given disturbance ratio (CTB/CSO) Interpolate to receive intermediate values for other output levels level (dbµv) Signal-to-noise ratio C/N (db) S/N (db) Disturbance ratio * ) CTB (db) CSO (db) , , , , , , , * ) According to DIN EN , CENELEC channel plan 862 MHz C/N = output level - gain - noise fi gure - 2 dbµv (RF noise ratio) S/N = C/N db (video noise ratio, weighted) 4. Headend system data - overall view Assumptions: UFO compact system 19 with 48 PAL programmes (UFO 393), QAM transponders and external VOS 135/G Selected output level: 100 dbµv level (dbµv) C/N (db) S/N * ) (db) CTB (db) CSO (db) UFG ,4 - - VOS 135/G , Total , * ) The sum total S/N is calculated with a power addition of the two S/N values 35

36 UFO compact signal processing system Catalogue and special brochures SAT Satellite and Terrestrial Antenna Produ cts and Syste ms Satellite and Terrestrial Antenna Products and Systems Offset parabolic antennas Amplifiers Feed systems Sat-IF distribution system Digital receivers Single-cable system Caravan UFO compact processing Terrestrial antennas Accessories for the distribution network Mounting accessories Measuring instruments Diplexers Technical appendix Cables, plugs, transitions 001_Intro.indd :52:49 MEASURING Measuring Inst Programme 20 rument 09 More channe ls Kathrein Sa t IF Dist ribution Syst em Measuring Instrument Programme More channels Sat-IF distribution system /3/0409/ZWT/PF Your contact: subject to change. Sat IF Internet: sat@kathrein.de KATHREIN-Werke KG Telephone +49 (0) Fax +49 (0) Anton-Kathrein-Straße 1-3 P.O. Box Rosenheim/Germany