Technical Data Sheet. Scotchlite Reflective Material Series 6100 High Gloss Trim Series 6200 High Gloss Film. Retroreflective Performance.
|
|
- Ursula Hines
- 6 years ago
- Views:
Transcription
1 Technical Data Sheet 3 Scotchlite Reflective Material Series 6100 High Gloss Trim Series 6200 High Gloss Film Technical Data Sheet August 1999 Description 3M Scotchlite Reflective Material - High Gloss is designed to enhance the visibility of the wearer, in daytime, nighttime, or low-light conditions. 3M Scotchlite Reflective Material - Series 6200 High Gloss Film consists of highly retroreflective microprisms formed on flexible, glossy, and UV-stabilized polymeric film. A white flexible film sealed on the backside of the 3M Scotchlite Reflective Material - Series 6100 High Gloss Trim encapsulates the microprisms and protects the reflective product from dirt and moisture penetration. Fluorescent red-orange and fluorescent lime-yellow high gloss colors are conspicuous under daytime conditions, particularly at dawn or dusk. Color Product Number Daytime Color Reflected Color 6160 or 6260 White White 6183 or 6283 Orange Orange 6184 or 6284 Green Green 6185 or 6285 Blue Blue 6186 or 6286 Fluorescent Red red-orange 6187 or 6287 Fluorescent Yellow lime-yellow 6188 or 6288 Yellow Yellow 6189 or 6289 Red Red Retroreflective Performance The coefficient of retroreflection (R A, in cd/lux/m 2 ) is measured by methods traceable to either of the following retroreflective intensity testing procedures: ASTM E809 and E810 (R A ) CIE 54: 1982 (R ) The R A values were measured at the listed specific entrance and observation angles. The R A values are averages of readings taken from orientation angles that are 90 degrees apart unless stated differently. The 0 orientation angle is to be taken as downweb of 3M supplied rolls. Please contact your 3M representative for the proposed specifications. Product Daytime Entrance Observation Typical Minimum Number Color Angle Angle R A R A 6160 or White or Fluorescent lime-yellow or Orange or Yellow or Green or Red or Fluorescent red-orange 6185 or Blue
2 EN 471 and ANSI Performance 3M Scotchlite Reflective Material White High Gloss Trim, 3M Scotchlite Reflective Material White High Gloss Film, 3M Scotchlite Reflective Material Fluorescent lime-yellow High Gloss Trim, and 3M Scotchlite Reflective Material Fluorescent lime-yellow High Gloss Film are certified to the European Standard EN 471 High-visibility warning clothing as class 2 separate performance retroreflective materials. These products will meet or exceed the American National Standard for High-Visibility Safety Apparel, ANSI/ISEA Level 2 retroreflective performance. The initial photometric performance meets or exceeds the requirements in EN 471 Table 5 and ANSI/ISEA Table 5. The products are EN 471 certified for 75 washings at 60 C. Material subjected to the exposure tests listed below will maintain a minimum R A of 100 cd/lux/m 2 at -5 entrance angle and 0.2 observation angle unless stated otherwise. Initial Retroreflectivity:... EN 471 Class 2 (Table 5) ANSI/ISEA Level 2 (Table 5) Abrasion: pren 530 Method cycles Flexing: ISO 7854 Method A 7500 cycles Cold Fold: ISO 4675 (-20 C) Temperature Cycle: (50±5) C 20 (-30±2) C Wash: ISO 6330 Method 2A C wash and tumble 50 C Wet Reflectivity: EN 471 Annex A Physical Performance 3M Scotchlite Reflective Material - Series 6100 High Gloss Trim and 3M Scotchlite Reflective Material - Series 6200 High Gloss Film are subjected to the exposure tests listed below and will maintain a minimum R A of 100 cd/lux/m 2 at 0 orientation, -4 entrance angle and 0.2 observation angle unless stated otherwise. Performance Approved Test Feature Products Method Cold Flex: Series 6100 and 6200 ISO 4675 (-15 C) No cracks over a 3mm mandrel Wash: Retains Series 6100 and 6200 ISO 6330 Method 2A >80% of (except white and C wash initial R A fluorescent lime- 38 C tumble dry yellow, see EN 471 performance) Heat Resistance: Series 6100 and C for 30 minutes >75% of (except white and initial R A fluorescent limeyellow, see EN 471 performance) Wet Reflectivity: White, orange, green, EN 471 Annex A fluorescent lime-yellow, yellow Solvent Series 6100 and 6200 Wiped with a soft cloth Resistance: containing mineral Will not dissolve spirits, kerosene, or pucker unleaded gasoline, methanol, or VM&P Naphtha Wash: ISO 6330 Method 2A R A > C wash (Average of 0 /90 ) and tumble 50 C
3 Color Specifications The initial chromaticity coordinates for 3M Scotchlite Reflective Material - Series 6100 High Gloss Trim and 3M Scotchlite Reflective Material - Series 6200 High Gloss Film with a white backing, as measured in accordance with ASTM E , are within the color boxes defined below: 6160 & 6260 White x y & 6283 Orange x y & 6284 Green x y & 6285 Blue x y & 6286 Fluorescent red-orange x y & 6287 Fluorescent lime-yellow x y & 6288 Yellow x y & 6289 Red x y Performance While use of 3M Scotchlite Reflective Material enhances visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions. Performance will vary depending upon actual use, exposure condition and maintenance. Users should test reflective material to satisfy conformance to their own requirements. Application Instructions Whenever two or more pieces of Scotchlite reflective material - series 6100 high gloss trim and Scotchlite reflective material - series 6200 high gloss film are used together on a single surface or as a set, they should be matched to ensure uniform color and reflectivity. Sewing to Fabrics: Sew in place with no more than 8 stitches per inch (2.54 cm), and not less than 1/8 (3mm) from the edge of the material. Thread recommendation: 100% polyester. To reduce sticking, apply a non-stick material (e.g., silicone or nylon) to the bottom of the presser foot. Welding to Fabrics: Scotchlite reflective material - series 6100 high gloss trim and Scotchlite reflective material - series 6200 high gloss film are composed primarily of vinyl materials and will weld suitably to most PVC films with any of the following methods: radio frequency (RF), high frequency (HF), dielectric, or ultrasonic. Adhesion to specific films will vary with the lubricants, pigments, plasticizers, and fillers used to make the PVC film. It is important for the user to test adhesion with each new lot and new vendor. RF Sealing: The most widely used method of sealing is RF. It has the advantage of being able to handle patches and trims using a step-and-repeat
4 process. This allows for the equipment to be used for a wide range of uses at a very economical price. Typically the price for this equipment will range from $20,000 to $50,000. For more information, please refer to our 3M Scotchlite Reflective Material High Gloss Film Application Guide for Welding. Screen Printing: Below are several inks that can be used for printing on top of the vinyl surface of 3M Scotchlite Reflective Material - Series 6100 High Gloss Trim and 3M Scotchlite Reflective Material - Series 6200 High Gloss Film. All inks should be continuously tested to ensure acceptable adhesion in the event of changes occurring in the manufacturing process or composition of the ink. Prior to printing, wiping the surface with a soft cloth lightly dampened with alcohol may help ink adhesion. Ink Ink Type Manufacturer 3M Scotchlite Transparent 3M Traffic Control Process Color Materials Division Series 990 Intl: , , Fax: M Scotchcal Transparent 3M Commercial Screen Printing Graphics Division Ink Series 9700 UV Intl: , , Fax: Series - All Opaque & Naz-Dar/KC Coatings Purpose Screen Ink Transparent Ph: , Fax: M Scotchcal Transparent 3M Commercial Screen Printing Graphics Division Ink Series 4400 Intl: , , Fax: NOTE: Scotchlite reflective material - series 6200 high gloss film is shipped with a polyester liner on top of the vinyl film for easy handling. This polyester liner can be removed either before or after the RF sealing process, but before sewing or screen printing. NOTE: Scotchlite reflective material - series 6200 high gloss film does not require a sealing film to be retroreflective. However, we do recommend the application of a sealing film to keep out dirt and water that could result in decreased reflectivity. NOTE: Dyes may migrate when placed in direct contact with vinyl and some fabrics. Prior to application, Scotchlite reflective material - series 6100 high gloss trim and Scotchlite reflective material - series 6200 high gloss film must be kept separate and should be tested for dye migration. Care and Maintenance Instructions Important: Test each application according to appropriate care instructions required for the finished product. Actual life of Scotchlite reflective material - series 6100 high gloss trim and Scotchlite reflective material - series 6200 high gloss film depends on cleaning method and wear conditions. Wash: Machine wash, 60 C (140 F) Bleach: Do not bleach Dry: Tumble dry medium, 50 C (122 F) Iron: Do not iron Dry-clean: Do not dry-clean
5 Product Availability 3M Scotchlite Reflective Material - Series 6100 High Gloss Trim and 3M Scotchlite Reflective Material - Series 6200 High Gloss Film are available in rolls with the following standard widths and lengths: Product Width Width Splices Standard Number Tolerance Allowed Roll Length , 1 3/8, 1.5, ±1/32 2 per 100 yd. & 2, 25 mm, (±0.8 mm) roll max. 100 m 50.8 mm, 70 mm mm ±0.5 mm 2 per 100 m roll max. Order and Product Information To order 3M Scotchlite Reflective Material Products, contact 3M Personal Safety Products Department Customer Service at Ext. 2. Storage and Shelf Life Store in a cool, dry area and use within two years after date of receipt. Store rolls in original shipping cartons. Return partially used rolls to the carton or suspend horizontally through the core. Cut sheets should be stored flat cm +6.4 mm, none 50 m -0 mm
6 Important Notice to Purchaser: Except where prohibited by law, 3M makes the following limited warranty in place of any others, express or implied, including any implied warranties or conditions of MERCHANTABILITY or fitness for a particular purpose or any implied warranty or condition commonly found in the industry: 3M shall replace or, at its option, refund the price paid to 3M for any 3M Scotchlite Reflective Material or other 3M reflective products ( Products ) which at the time of shipment to 3M s purchaser do not meet 3M s published Product specifications. Because of the unlimited variety of potential applications for Products, BEFORE production use, the User (which may be a converter or end product manufacturer or others) must determine that the Products are suitable for the intended use and are compatible with other component materials. User is solely responsible for determining the proper amount and placement of Products. While reflective Products enhance visibility, no reflective product can ensure visibility or safety under all possible conditions. 3M shall not be liable in contract or in tort, for any indirect, incidental, special, or consequential damages (including, without limitation, lost profits, goodwill and business opportunity) relating to the use or inability to use the Products. 3 Personal Safety Products Department 3M Safety and Security Systems Division 3M Center, Building 225-4N-14 St. Paul, MN , Ext. 2 3M Canada P. O. Box 5757 London, Ontario, Canada N6A 4T M Mexico Avenida Santa Fe #55 Col. Santa Fe, CP01210 Delegacion Alvaro Obregon Telephone: Fax: % post-consumer waste paper Printed in the USA. Copyright 1999, 3M IPC. All rights reserved
Scotchal Translucent Graphic Film Series 2630
3 Product Bulletin 2630 Release B, Effective Aug 2008 Scotchal Translucent Graphic Film Series 2630 For Electronic Cutting Description 3M Translucent Scotchcal Graphic Film Series 2630 is intended for
More informationProduct Bulletin IJ3650
Product Bulletin IJ3650 Revision O, Effective March 2016 (Replaces N, Apr 15) IJ3650-10 IJ3650-114 Product Description 2-mil, opaque white and clear, translucent films For Solvent, UV, and Latex Inkjet
More informationWhy3M. Trusted Performance. 3M Scotchlite Reflective Material Series 9500 Fire Coat Trim
3M Scotchlite Reflective Material Why3M Trusted Performance The original, premium, high visibility triple trim depended upon worldwide for reliable performance when duty calls. An emblem of firefighters
More informationFor Cut Film Decoration and Piezo Inkjet Direct Printing
Panagraphics III Wide Width Flexible Substrate Product Bulletin P3 Release G, Effective October 2008 See Bulletin Change Summary on last page For Cut Film Decoration and Piezo Inkjet Direct Printing Product
More information3M Envision Flexible Substrate
3M Envision Flexible Substrate Product Bulletin FS-1 Release Release D, Effective D, Effective June 2018 June (Replaces 2018 (Replaces C, Jul 15) C, Jul 15) Product Description 22-mil, white-pigmented
More informationGraphic Protection Options Overlaminates and clears Product Bulletin
3M Europe, Effective June 2013 Graphic Protection Options Overlaminates and clears Product Bulletin Products Standard Overlaminates This Bulletin provides an overview of all 3M graphic protection options.
More informationGraphic Protection Options Overlaminates and clears Product Bulletin
3M Europe, Effective March 2015 Graphic Protection Options Overlaminates and clears Product Bulletin Product Bulletin Products This Bulletin provides an overview of all 3M graphic protection options. All
More information1.0 DESCRIPTION. This specification covers roll-up signs to be used in temporary traffic control zones.
(Page 1 of 10) ROLL-UP SIGNS (MGS-04-01O) 1.0 DESCRIPTION. This specification covers roll-up signs to be used in temporary traffic control zones. 2.0 MATERIAL. 2.1 SIGNS AND OVERLAYS. 2.1.1 SUBSTRATES.
More informationBlue/Magenta/Yellow in transmission. Gold/Green/Blue in reflection
Technical Data Sheet Revision F, August 2017 Product Description 3M DI CHROIC DF (the Product ) is a non-adhesive transparent film that provides a dichroic color effect, meaning it appears to change color
More informationFor Cut Film Decoration and Inkjet Direct Printing
Panagraphics III Wide Width Flexible Substrate For Cut Film Decoration and Inkjet Direct Printing Product Bulletin P3 Release I, Effective September 2010 (Replaces H, July 09) See Bulletin Change Summary
More informationApplication Tapes. Premasking and Prespacing Tape for Graphic Films
Product & Instruction Bulletin 4.3 Release L, Effective November 2013 (replaces K, Jan 10) See Bulletin Change Summary on last page Application Tapes Premasking and Prespacing Tape for Graphic Films 1.
More informationGraphic Protection Options
3M Europe, Effective April 2013 Graphic Protection Options Overlaminates and clears Product Bulletin Products This Bulletin provides an overview of all 3M graphic protection options. All product-specific
More informationPanagraphics III. Wide Width Flexible Substrate. Product Bulletin Panagraphics III Release B-EU, Effective June Product Description
Product Bulletin Panagraphics III Release B-EU, Effective June 2009 Panagraphics III Wide Width Flexible Substrate For Cut Film Decoration and Piezo Inkjet Direct Printing Product Description 3M Panagraphics
More informationScotch Heavy Duty Vinyl Electrical Tape 22
Scotch Heavy Duty Vinyl Electrical Tape 22 Data Sheet July 2015 Description Agency Approvals & Self Certifications Scotch Heavy Duty Vinyl Electrical Tape 22 is a premium grade, 10-mil thick, vinyl insulating
More information3 Application Tapes. Premasking and Prespacing Tape for Graphic Films. Instruction Bulletin 4.3 Release UK-K, Effective March 2010
Instruction Bulletin 4.3 Release UK-K, Effective March 2010 3 Application Tapes Premasking and Prespacing Tape for Graphic Films Table of Contents Product Description... 1 Product Line... 2 Characteristics...
More informationGraphic Protection Options
3M UK, Effective August 2015 Graphic Protection Options Overlaminates and clears Product Bulletin Product Bulletin Products This Bulletin provides an overview of all 3M graphic protection options. All
More informationSIIT GX 3M Ink Series
Product & Instruction Bulletin GX SIIT GX 3M Ink Series Uses GX 3M inks are vibrant, flexible, colored inks for use in the Seiko I Infotech ColorPainter H Series Printers Designed for printing on many
More informationRotor Blade Protection Kit 8999K11
3 Rotor Blade Protection Kit 8999K11 June 2010 Product Description The components in this kit may be used to protect the leading edge of rotor blades on heavy lift helicopters. This application uses 8-inch
More information3M Super 23 Electrical Tape
WEATHERPROOFING S CHEMICALS ET 3M SUPER 23 Features: Premium all-weather black electrical tape Remains conformable at -18 C /0 F 7mm thickness UV resistant Part # Size ET 3M Super 23 19mm x 9.15m WEATHERPROOFING
More informationTechnical. Data Sheet. 3M Scotchlite Reflective Material 8725 / 8725 LL Silver Transfer Film. May Product Information. 2.
Technical Data Sheet May 2011 3M Scotchlite Reflective Material 8725 / 8725 LL Silver Transfer Film 1. Product Information Film is intended for the application on high-visibility warning clothing such
More information3M Commercial Graphics 3M Envision Print Wrap Film 480Cv3 3M Envision Gloss Wrap Overlaminate 8548G. Everything. Again.
3M Commercial Graphics 3M Envision Print Wrap Film 480Cv3 3M Envision Gloss Wrap Overlaminate 8548G This Changes Everything. Again. Greener Solutions 3M Envision Wrap Films This Changes Everything. Again.
More information3 Instruction Bulletin 5.41-EU
3 Instruction Bulletin 5.41-EU Release A-EU, Effective August, 2007 Controltac Graphic Film Series IJ 380 Application of Controltac Graphic Film Series IJ 380 on Substrates with Recesses Introduction 3M
More informationApplication. Wet Method for Translucent Screen Printed, Thermal Mass Transfer and Cut Graphics
Instruction Bulletin 5.7 Release E, Effective January 2006 See Bulletin Change Summary on last page Application Wet Method for Translucent Screen Printed, Thermal Mass Transfer and Cut Graphics Note: For
More information3M - A Global, Diversified Technology Company
3M - A Global, Diversified Technology Company Everyday, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company s customers know they can rely on 3M to help
More information3M Automotive and Aerospace Solutions Division. Spec d to protect.
3M Automotive and Aerospace Solutions Division Spec d to protect. Every military mission is a critical mission. It takes training, precision and confidence. That s why your helicopter has to be in top-notch
More information3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT
3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT For Tape Over Wire (TOW) and Wire-Over-Tape (WOT) Shielded Cable For 250 2000 kcmil cable with 650-mil primary insulation thickness Instructions
More information3M 8900 Single-mode SC Crimplok Connector
3M 8900 Single-mode SC Crimplok Connector Technical Report June 1999 80-6110-1441-8 1 1.0 Product Description & Requirements The 3M SC Single-mode Crimplok Connector is designed to provide the customer
More information3 Innovation. Application Guidelines
Application Guidelines Effective: January 19, 2006 Vikuiti Brightness Enhancement Film II (BEF II) Vikuiti Brightness Enhancement Film III (BEF III) Vikuiti Thin Brightness Enhancement Film (TBEF) Description
More informationB. 3M Substrates 3M Panaflex Awning and Sign Facing 945GPS 3M Panagraphics III Wide Width Flexible Substrate
Instruction Bulletin 5.7 Release H, Effective July 2011 (Replaces G, Nov 08) See Bulletin Change Summary at end of Bulletin Application Wet Method for Translucent, Screen Printed and Cut Graphics 1. Product
More informationCold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL
Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std. 404 35 kv Class 250 kv BIL Kit Number 5798A-MT Cable Range Requirements Cable Insulation O.D.
More information3M Europe S.A./N.V Commercial Graphics July 2010
Making a perfect wet applicaton of 3M Scotchcal Clear View Graphic Film 8150 Step 1: Prepare the surface: Spray water with detergent (soap) on complete application area. Making a perfect wet applicaton
More informationUser Manual. Model 979T and 979R Digital Audio Converters
User Manual Model 979T and 979R Digital Audio Converters Table Of Contents 1.0 Introduction....................... 3 2.0 Checking Package Contents............... 3 3.0 Installation........................
More information3M Scotchcast Flexible Power Cable Splice Kits 82-F Series
3M Scotchcast Flexible Power Cable Splice Kits 82-F Series For use in weather-exposed, direct burial or submerged locations. For making in-line splices on non-shielded portable power cables and cords rated
More information3M Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series
1 mm pitch connector system Stacked, Horizontal or Vertical Mating Low profile 5 mm mated height Surface mount retention clips reduce stress on surface mount leads Keyed design helps prevent mating misalignment
More informationInstructions. Cable with Armor F CAUTION. October Rev A
3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables
More informationWAH WANG HOLDINGS (HONG KONG) CO., LTD.
Wah Wang Data Sheet For 5mm Super Flux White LED High Reliable Type High Power 3 LED Chips Series RF-M05V53WUR4-B4-Q Address : Unit C, D & E, 12/F., Po Shau Centre, No. 115 How Ming Street Kwun Tong, Kowloon,
More informationInstallation instructions Cable transit device Roxtec RS ES Ex
General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationwww.greenelectricalsupply.com MaxLite 6 & 8 Commercial Downlight Retrofit General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,
More informationThe LCD general specification provides outgoing inspection provision and its expected quality level based on outgoing inspection of LCD.
Page 1 of 6 1. PURPOSE Issued By : Wilson Chan Audited By : Management : The LCD general specification provides outgoing inspection provision and its expected quality level based on outgoing inspection
More information27mm ECAM Double Cable Entry Port
27mm ECAM Double Cable Entry Port Instructions October 2006 1.0 Introduction The 3M 27mm ECAM Double Cable (External Cable Assembly Module) Entry Port is designed to accept fiber optic loose tube & central
More informationInstallation instructions Roxtec RM PE B
Installation instructions Roxtec RM PE B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Plastic film Conductive
More information3M Better Buried Compound Compression Closure System
3M Better Buried Compound Compression Closure System Instructions March 2016 78-0015-2948-2-A Contents: 1.0 General...3 2.0 Kit Contents...3 3.0 Closure Selection Guide...4 4.0 LHS End Cap Installation...5
More informationInstallation instructions Roxtec CM PE systems
Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be
More informationSPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:00 Date: 08.03.2010 SPECIFICATION OF 192F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-192/SM/MTY(F)-MFN-O9.1 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More informationCast vs. Calendered Vinyl
Cast vs. Calendered Vinyl Learn the differences and why to use the right vinyl in the right application. A quick read through this article will help you understand all the ins and outs of calendered and
More informationInstallation instructions Roxtec RM ES B
Installation instructions Roxtec RM ES B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Vertical screen Plastic
More information3 Foam Sealed Closure 2" (50 mm) with Compound Compression
3 Foam Sealed Closure 2" (50 mm) with Compound Compression Instructions 1.0 General 1.1 The 3M Foam Sealed Closure is designed to be used in the construction and maintenance of buried and underground PIC
More informationSima XL-72 Theater Inflatable Indoor/Outdoor Projection Screen
Sima XL-72 Theater Inflatable Indoor/Outdoor Projection Screen www.simaproducts.com Table of Contents TABLE OF CONTENTS...2 INTRODUCTION...3 LIST OF MATERIALS...4 SELECTING A SETUP SITE...4 UNPACKING THE
More information3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized
More information3M Cold Shrink Foldback Splice Jacket Kit
3M Cold Shrink Foldback Splice Jacket Kit SJ-FB Instructions! CAUTION Working around energized systems may cause serious injury or death. Installation should be performed by personnel familiar with good
More information3M Cubitron. II Fibre Disc 982C and 987C Now available in grades 36+, 60+ and 80+ Engineered. Perfection. Epic Performance.
3M Cubitron II Fibre Disc 982C and 987C Now available in grades, and Engineered Perfection. Epic Performance. The Future is Now. Leave conventional abrasives in the past and do more than you thought possible
More informationIndyGo Facility Upgrades Project 35671EE
SECTION 260553 IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Identification for raceways. 2. Identification of power and control cables. 3. Identification for
More information3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-500-1000 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around
More informationInstallation instructions Roxtec RS ES Ex
General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationOnce we ve got you covered, you re covered.
3M Graphics Warranties Once we ve got you covered, you re covered. 3M Basic Product Warranty 3M Performance Guarantee 3M MCS Warranty 3M Graphics Warranties at a glance 3M Basic Product Warranty for all
More informationInstallation instructions Roxtec RM PE
Installation instructions Roxtec RM PE Environmental side Environmental side Pipe Cable screen/armor Layers Layers Cable sheath Plastic film Conductive tape Integrated environmental sealing system for
More informationInstallation Guide. Table of Contents: HotLok Full Rack Blanking Panel Kit. Mounting Extrusion. HotLok Blanking Panel. HotLok Blanking Sheet
Part Number 10143 42U Kit Part Number 10144 36U Kit Mounting Extrusion Part Number 20225 HotLok Clip Full Rack HotLok Blanking Panel Part Number 10031 HotLok Blanking Panel 1U Part Number 10033 HotLok
More informationSPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:01 Date: 07.10.06 SPECIFICATION OF 96F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-96/SM/MTY(F)-MFN-O6.3 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More information3M Knifeless Tape. Finish Line Perf Line Bridge Line Design Line Tri Line Precision Line PPF Line. Product Description. Commercial Solutions Division
Effective January 2017 Commercial Solutions Division 3M Knifeless Tape Finish Line Perf Line Bridge Line Design Line Tri Line Precision Line PPF Line Product Description 3M Knifeless Tapes are filament
More informationThrough Hole Lamp Product Data Sheet LTW-42NDP4-HF Spec No.: DS Effective Date: 08/23/2011 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-42NDP4-HF Spec No.: DS20-2011-0111 Effective Date: 08/23/2011 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More informationElectronic Roll Feed (ERF) Registration System
3 Electronic Roll Feed (ERF) Registration System Information Folder 9.6 May 2014 Replaces IF 9.6 dated February 2013 Safety Blanking Die Guard: Fabricated guards enclose the blanking die to prevent accidental
More informationInstallation instructions Roxtec RM BG B systems
Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be
More information3M Graphics Warranties. Once we ve got you covered, you re covered. 3M Basic Product Warranty 3M Performance Guarantee 3M MCS Warranty
3M Graphics Warranties Once we ve got you covered, you re covered. 3M Basic Product Warranty 3M Performance Guarantee 3M MCS Warranty 3M Graphics Warranties at a glance 3M Basic Product Warranty for all
More informationEZ-LIGHT S18L Color General-Purpose Indicators
Up to three independent colors in one unit Translucent face appears gray when off to avoid false indication M Euro connector models available for plug and play indication Wide 80º field of view Wide 0
More informationInstallation instructions Roxtec RM ES
Installation instructions Roxtec RM ES Environmental side Environmental side Pipe Cable screen/armor Layers Layers Cable sheath Vertical screen Plastic film Conductive tape Integrated environmental sealing
More informationPORON Microcellular Urethanes Product Availability
High Performance Foams Division www.rogerscorp.com Effective: March 3, 2009 Supersedes: February 25, 2008 PORON Microcellular Urethanes Product Availability PORON 4701-15: SOFT SEAL- Supported with 2 mil
More information3M Sensored Termination (15 kv) QX-T15I-vi1-E
3M Sensored Termination () QX-T15I-vi1-E Data Sheet May 2016 Kit Contents: Each kit contains sufficient quantities of the following materials to make three single-phase terminations. 31" (REF) One piece
More informationColor Star Advanced Talking Color Identifier Light Detector and Light Analyzer
USER MANUAL Color Star Advanced Talking Color Identifier Light Detector and Light Analyzer EN TABLE OF CONTENTS 1. INTRODUCTION 2 2. DESCRIPTION OF THE DEVICE 3 3. CHARGING THE BATTERY 4 4. HOW TO TURN
More informationIntelligent Pendulum Hardness Tester BEVS 1306 User Manual
Intelligent Pendulum Hardness Tester BEVS 1306 User Manual Please read the user manual before operation. PAGE 1 Content 1. Company Profile... 3 2. Product Introduction... 3 3. Operation Instruction...
More informationReflect the light. Content. 3M Scotchlite Reflective Material stands for:
Service Guide. 2 Reflect the light. In 2013 we successfully launched our Reflect the light campaign which presents the 3M Scotchlite Reflective Material brand in a whole new way and gives you as manufacturer
More information3M Fiber Optic Closure System LL
3M Fiber Optic Closure System LL 3M Fiber Optic Closure System The 3M Fiber Optic Closure System LL provides a protective yet accessible environment for housing single or mass fusion fiber splices. The
More informationSpec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer
Spec No.: ZTT 45012 Revision: 2 Date: Oct 3, 2014 TECHNICAL SPECIFICATION Optical Fiber Cable (Reference: NBR 14566) Designer Senior Technical Manager Approver Chief Technical Engineer Jiangsu Zhongtian
More informationHandling and storage of cinematographic film
Rec. ITU-R BR.1219 1 RECOMMENDATION ITU-R BR.1219* Rec. ITU-R BR.1219 HANDLING AND STORAGE OF CINEMATOGRAPHIC FILM RECORDING (Question ITU-R 109/11) (1995) The ITU Radiocommunication Assembly, considering
More information3M Cubitron. II Fibre Disc 982C and 987C Now available in grades 36+, 60+ and 80+ Engineered. Perfection. Epic Performance.
3M Cubitron II Fibre Disc 982C and 987C Now available in grades, and Engineered Perfection. Epic Performance. The Future is Now. Leave conventional abrasives in the past and do more than you thought possible
More informationInstallation instructions Roxtec RM ES systems
Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be
More informationThrough Hole Lamp Product Data Sheet LTW-1KHDS5Z Spec No.: DS Effective Date: 10/19/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-1KHDS5Z Spec No.: DS20-2012-0148 Effective Date: 10/19/2012 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More information3M Knifeless Tape. Finish Line Perf Line Bridge Line Design Line Tri Line Precision Line PPF Line. Product Description. Commercial Solutions Division
Effective January 2017 Commercial Solutions Division 3M Knifeless Tape Finish Line Perf Line Bridge Line Design Line Tri Line Precision Line PPF Line Product Description 3M Knifeless Tapes are filament
More informationSPECIAL SPECIFICATION 8311 LED Countdown Pedestrian Signal Module
2004 Specifications CSJ 0542-06-041, Etc. SPECIAL SPECIFICATION 8311 LED Countdown Pedestrian Signal Module 1. Description. Furnish and install LED Walking Person and Hand icon pedestrian signal modules
More informationInstallation instructions Roxtec RM BG systems
Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be
More informationThrough Hole Lamp Product Data Sheet LTW-2S3D7 Spec No.: DS Effective Date: 10/06/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-2S3D7 Spec No.: DS20-2005-014 Effective Date: 10/06/2012 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More informationChildren cannot always recognize potential hazards properly. This 5.1 system is not designed for operation in a heavy industry environment.
5.1 FLAT PANEL SPEAKER SYSTEM WITH POWERED SUBWOOFER Table of Contents: SAFETY AND SERVICE... 2 Operational Safety... 2 Location... 2 Ambient Temperature... 3 Electromagnetic Compliance... 3 Service...
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Lead (Pb) free product RoHS compliant. * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-1 diameter.
More informationCR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range
CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range Installation Manual Table of Contents Basic Operation...2 CR-R880-BL Block Diagram...2 Technical Specifications...3 Features...4
More informationSolutions for Electronic Specialty Markets (ESM)
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
More informationOPERATION AND MAINTENANCE MANUAL
OPERATION AND MAINTENANCE MANUAL SERIAL NUMBER CUSTOMER: SALES REP.: CONTENTS Mixer Installation / Assembly / Dimension Drawings Safety... 1 Customer Service Contact... 1 Initial Inspection... 2 Installation...2
More informationIJ680-CR 3M Graphics Warranties. 3M Graphics Warranties. Warranty Bulletin Revision G, January Table of Contents. 1.
IJ680-CR Warranty Bulletin Revision G, January 2019 Table of Contents 1. Warranty Coverage - Page 1 2. Definitions - Page 2 3. General Warranty Stipulations - Page 4 A. Removal Warranty with Heat - Page
More information3M Cubitron. II Fibre Disc 982C and 987C. Winner of the 2010 R&D 100 Award & The Editor's Choice Award. Engineered. Perfection. Epic Performance.
3M Cubitron II Fibre Disc 982C and 987C Winner of the 21 R&D 1 Award & The Editor's Choice Award Engineered Perfection. Epic Performance. The Future is Now. Leave conventional abrasives in the past and
More informationTECHNICAL SPECIFICATION
ISSUED : OCT. 02, 2006 PAGE : 1 OF 9 REV. : 1 TECHNICAL SPECIFICATION FOR GST 2006-043A LOOSE TUBE DRY CORE CABLE SINGLE JACKET/SINGLE ARMOR (SJSA CABLE) Prepared By : Oh-Heoung Kwon Engineer Optical Technical
More informationInstallation instructions Ex frames
General information Installation and maintenance: For European member countries of GENELEC shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14
More informationSeptember 28, 2018 CITY OF BERKELEY JOHN MUIR SCHOOL CROSSING IMPROVEMENTS SPECIFICATION NO C ADDENDUM NO. 2
Department of Public Works Transportation Division September 28, 2018 CITY OF BERKELEY JOHN MUIR SCHOOL CROSSING IMPROVEMENTS ADDENDUM NO. 2 Dear Bidder: The following amendments are hereby made to the
More information3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 for 5/8 kv Non-Shielded and Shielded Cables (Ribbon, Wire and UniShield Cables) Instructions Cable Size Range: Feeder: #8 AWG 500 kcmil Motor Lead: #10
More informationFlex Spectrum Exterior
B R G W B R G W +24V +24V Flex Spectrum Exterior User guide Contents Introduction...2 Welcome 2 Safety 2 Channel types 3 Installation...4 Cleaning the mounting surface (for adhesive tape) 4 Cutting and
More informationPreserving Our History: Principles of Archival Conservation
Preserving Our History: Principles of Archival Conservation Simple, Cost Effective Materials & Techniques for Protecting Paper Documents, Books and Periodicals Principles of Conservation Understand the
More informationFLUID VIEW 12V LED TAPE LIGHT
DRY LOCATION FLUID VIEW 12V LED TAPE LIGHT Medium brightness Available in 8+ CRI 16.4 ft. maximum run UL Listed & R/C SAM Manual Suitable for closet use 5-Year limited warranty SUITABLE FOR CLOSET USE
More informationPower Up. 3M Cubitron II Abrasive Discs For grinding, weld removal, deburring & more
3M Cubitron II Abrasive Discs For grinding, weld removal, deburring & more New! 3M Cubitron II Fibre Disc 982C, with 3M Roloc Quick Change Attachment System Power Up For speed, comfort and long life, nothing
More informationINSTRUCTION BOOK FOR. Fast-Fold NXT
INSTRUCTION BOOK FOR Fast-Fold NXT Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone
More information3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR
3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR Instructions July 2010 78-8135-0094-5-K 3 1.0 General 1.1 3M Fiber Optic Splice Closure 2178-XSB The
More information3M One Pass Mini Fiber Pathway
3M One Pass Mini Fiber Pathway Executive Questions What is the 3M One Pass Mini Fiber Pathway? The 3M One Pass Mini Fiber Pathway is a flexible, single-fiber, surface-mount cable pathway and drop cable
More informationUser Manual. HDTV Cat 5 Extender Video and Audio Over One Cat 5 Cable Model SCP-11 and SCP-11D
User Manual HDTV Cat 5 Extender Video and Audio Over One Cat 5 Cable Model SCP-11 and SCP-11D Model 1180T Transmitter Model 1180R Receiver Model 1180TD Transmitter Model 1180RD Receiver WARNINGS Read these
More informationLUXFLEX FLEXIBLE, COLORFUL BACKLIGHTING
FLEXIBLE, COLORFUL BACKLIGHTING For curvy, space-sensitive backlighting applications requiring beautiful color and a controllable, compact lighting, we provide LUXFLEX TM LED Flexible Sheets. Great for
More information