Revision 1.0 Parts List Mega

Transcription

1 Revision.0 Parts List Mega

2

3 Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 The data plate...3 Exploded Views...4 Drive unit... 4 Support bearing, labels and mechanical seals... 5 Connection housing and cable entry... 6 N...7 H...8 Stand...9 Spare Parts... 0 List of parts Mega Parts List

4 Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Grindex parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Grindex does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables Specially approved products Qualification of personnel Only Grindex or Grindex-authorized service personnel may undertake repair work on Ex-approved products. Dimensional accuracy inspection Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection Mega Parts List

5 Product Description Product Description Products included The data plate Introduction The data plate Pump model Standard EX MSHA Drainage Sludge Mega X X The data plate is a metal label located on the main body of the pump. The data plate lists key product specifications WS00008C. Pump type number 2. Frequency 3. Phases, type of current 4. Rated shaft power 5. Thermal class 6. Locked rotor code-letter 7. Country of origin 8. Maximum power consumption 9. Product weight 0. Maximum submersion depth. Degree of protection 2. Maximum capacity 3. Rated current 4. Direction of the start reaction 5. Direction of the impeller rotation 6. Maximum head 7. Serial number 8. Rated voltage 9. Pump model Mega Parts List 3

6 Exploded Views Exploded Views Drive unit A Mega Parts List

7 Exploded Views Support bearing, labels and mechanical seals A Mega Parts List 5

8 Exploded Views Connection housing and cable entry A Figure : Standard Mega Parts List

9 Exploded Views N A Mega Parts List 7

10 Exploded Views H A Mega Parts List

11 Exploded Views Stand A Mega Parts List 9

12 Spare Parts Spare Parts List of parts Pos. No Part. No Denomination Parallel key 2X8X63-A Hexagon head screw M0X20-A Hexagon head screw M0X55-A Hexagon head screw M2X45-A Hexagon head screw M2X35-A Hexagon head screw M2X45-A Hexagon head screw M2X45-A Hexagon head screw M2X70-A Hexagon head screw M2X90-A Hexagon head screw M6X50-A4-70 Hydraulic end material: Full Hydraulic end material: Hydraulic end material: Full Plate-blank Hexagon head screw M6X2-A Slotted head screw M0X30-A Hex.socket hd screw M0X70-A Inspection screw Hexagon head screw M0X55-A Hexagon head screw M2X35-A Hexagon head screw M2X35-A Stud 0X60-A Stud M2X80-A2-70 Hydraulic end material: Full Hydraulic end material: Qty/Version Mega Parts List

13 Spare Parts Pos. No Part. No Denomination Stud 2X80-A4-70 Hydraulic end material: Full Hexagon head screw M2X45-A Round nut M70X Hexagon nut M0-A Hexagon head screw M2X60-A Hexagon head screw M2X45-A Hexagon head screw M2X70-A Plain washer 0-A4-70HV Plain washer 2-A Plain washer 2-A2-70 Hydraulic end material: Full Hydraulic end material: Plain washer 2-A4-70HV Hydraulic end material: Full Plain washer 0.5X28X Lock washer O-ring 9.2X3 NBR Lock washer Cable washer Seal ring Hexagon head screw M2X70-A Inspection screw Hexagon nut M2-A2-70 Hydraulic end material: Full Hydraulic end material: Hexagon nut M2-A4-70 Hydraulic end material: Full Hexagon nut M2-A2-70 Hydraulic end material: Full Hydraulic end material: Hexagon nut M2-A4-70 Hydraulic end material: Full O-ring 69.2X5.7 NBR Hexagon nut M2-A Hexagon nut M2-A Qty/Version Mega Parts List

14 Spare Parts Pos. No Part. No Denomination O-ring 269.3X5.7 NBR O-ring 279.3X5.7 NBR O-ring 49.3X5.7 NBR O-ring 499.3X5.7 NBR Plain washer 2-A Connection plate Plain washer 2-A Grooved pin Lifting eye bolt Plain washer 2-A Sealing washer Protective plug Protective plug Plug Plain washer 2-A Ball bearing Gland screw Plain washer 6.5X20.5X2- A2-70 (4)-6mm Aux. cable entry SUBCAB 7x.5mm OD=5,50-6,50mm Plate Plugged aux. cable entry Seal sleeve (4)-6mm Aux. cable entry SUBCAB 7x.5mm OD=5,50-6,50mm Plug Plugged aux. cable entry Terminal board unit 72, Hexagon nut 2 72, Plain washer 0.5X28X2 2 72, Cable washer 2 72, Closing link 3 72, Connection term boar Detector unit Lock washer Entrance flange Plain washer 46.5X70X2- A Plain washer 54.5X70X2- A2-70 Cable entry (32)-35mm Cable entry (32)-35mm Cable entry (4)-44mm Cable entry (35)-38mm Cable entry (38)-4mm Cable entry (4)-44mm Cable entry (35)-38mm Qty/Version Mega Parts List

15 Spare Parts Pos. No Part. No Denomination Seal sleeve Cable entry (32)-35mm Cable entry (32)-35mm Seal sleeve Cable entry (4)-44mm Cable entry (4)-44mm Seal sleeve Cable entry (35)-38mm Cable entry (35)-38mm Seal sleeve Cable entry (38)-4mm El-lead through 6-leads 50 Hz 380V-400V D 660V-690V Y P2=90kW 6-leads 60 Hz 440V-460V D P2=04kW/40hp 6-leads 50 Hz 400V-440V D P2=90kW 6-leads 60 Hz 575V D P2=04kW/40hp 6-leads 50 Hz 550V D P2=90kW 6-leads 60 Hz 380V D P2=04kW/40hp 6-leads 50 Hz 400V D P2=90kW 6-leads 60 Hz 400V D P2=04kW/40hp 6-leads 50 Hz 500V-550V D P2=90kW 6-leads 60 Hz 575V-600V D P2=04kW/40hp El-lead through 2-leads 50 Hz 500V Y// 000V YSER P2=90kW Ring Cover Plate 70 MM Plain washer 2-A2-70 Hydraulic end material: Full Hydraulic end material: Plain washer 2-A4-70HV Hydraulic end material: Full Plain washer 2-A2-70 Hydraulic end material: Plain washer 2-A Motor cable Power cable x 2 SUBCAB 4G35+S(2x0,5) 35-37mm Star delta possible Power cable x SUBCAB 4G35+S(2x0,5) 35-37mm Qty/Version * Mega Parts List 3

16 Spare Parts Pos. No Part. No Denomination Motor cable Power cable x SUBCAB 3x50+2G35/2+S(2x0,5) 35-37mm Motor cable Power cable x SUBCAB 3x70+2G35/2+S(2x0,5) 38-4mm Motor cable Power cable x 2 SUBCAB 4AWG/3-2--GC 32,80-34,80mm Star delta possible Motor cable Power cable x SUBCAB AWG/3-2--GC 40,70-42,70mm Power cable x 2 SUBCAB AWG/3-2--GC 40,70-42,70mm Star delta possible Motor cable Power cable x 2 SUBCAB 4G25+S(2x0,5) 32-34mm Star delta possible Motor cable Power cable x SUBCAB S3x35+3x6/3+S(4x0,5) 32-34mm Motor cable Power cable x SUBCAB S3x50+3x25/3+S(4x0,5) 38-40mm Motor cable Power cable x SUBCAB S3x70+3x35/3+2S(2x0,5) 42-44mm Control cable subcab 7X,5 OD=5-7 MM Plain washer 2-A Plain washer 2-A Shaft unit SS Hydraulic end material: Full Hydraulic end material: Partial Shaft unit Hydraulic end material: O-ring 49.3X5.7 NBR Hexagon head screw M6X2-A Stator f 6-leads 60 Hz 2-poles 380V D P2=04kW/40hp Stator f 2-leads 60 Hz 2-poles 460V DSER 380V Y// P2=04kW/40hp 2-leads 60 Hz 2-poles 230V D// P2=04kW/40hp Qty/Version 400 * * * * * * * * * Mega Parts List

17 Spare Parts Pos. No Part. No Denomination Stator f 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=90kW 6-leads 60 Hz 2-poles 440V-460V D P2=04kW/ 40hp Stator f 6-leads 50 Hz 2-poles 400V D P2=90kW 6-leads 60 Hz 2-poles 400V D P2=04kW/40hp Stator f 6-leads 50 Hz 2-poles 400V-440V D P2=90kW Stator f 6-leads 60 Hz 2-poles 575V D P2=04kW/40hp Stator f 6-leads 50 Hz 2-poles 500V-550V D P2=90kW 6-leads 60 Hz 2-poles 575V-600V D P2=04kW/ 40hp Stator f 6-leads 50 Hz 2-poles 550V D P2=90kW Stator f 2-leads 50 Hz 2-poles 500V Y// 000V YSER P2=90kW Plain washer 2-A Mechanical seal Hex.socket hd screw M0X2-A O-ring 69.5X3 NBR Plug Ring Hydraulic end material: Full Hydraulic end material: Partial Plain washer Hydraulic end material: Protective casing PU Protective casing NBR Wear protection Parallel pin CP- H8-4X Protective plug M Protective plug M Protective plug M Protective plug M Mechanical seal Qty/Version Mega Parts List 5

18 Spare Parts Pos. No Part. No Denomination Plate Spring ring, solid Terminal block Tension pin Washer Compression spring Flange compl Flange Hexagon head screw M6X2-A Impeller unit Plain washer 2-A O-ring 9.2X3 NBR Pump housing Hydraulic end material: Full Pump housing Hydraulic end material: Full Drilled acc. to: EN tab. 9 ASME B ;tab Pump housing Hydraulic end material: Pump housing Hydraulic end material: Drilled acc. to: ASME B ;tab. 8 EN tab Impeller N 50 Hz Mtrl. Alloyed white iron (hardened, high chrome) Impeller N 60 Hz Mtrl. Alloyed white iron (hardened, high chrome) Impeller H 50 Hz Mtrl. Alloyed white iron (hardened, high chrome) Impeller H 60 Hz Mtrl. Alloyed white iron (hardened, high chrome) Impeller N 50 Hz Mtrl. Stainless steel, castings Impeller H 50 Hz Mtrl. Stainless steel, castings Impeller H 60 Hz Mtrl. Stainless steel, castings Suction cover uncoat Suction cover NBR Suction cover PU 2 Qty/Version Mega Parts List

19 Spare Parts Pos. No Part. No Denomination End sleeve 25 MM2; L=5 MM 6-leads 60 Hz 2-poles 575V D P2=04kW/40hp 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=90kW 6-leads 60 Hz 2-poles 440V-460V D P2=04kW/ 40hp 6-leads 60 Hz 2-poles 380V D P2=04kW/40hp 6-leads 50 Hz 2-poles 400V D P2=90kW 6-leads 60 Hz 2-poles 400V D P2=04kW/40hp 2-leads 60 Hz 2-poles 460V DSER 380V Y// P2=04kW/40hp 6-leads 50 Hz 2-poles 400V-440V D P2=90kW 2-leads 60 Hz 2-poles 230V D// P2=04kW/40hp Qty/Version leads 50 Hz 2-poles 500V-550V D P2=90kW 6-leads 60 Hz 2-poles 575V-600V D P2=04kW/ 40hp Mega Parts List 7

20 Spare Parts Pos. No Part. No Denomination End sleeve 25 MM2; L=5 MM 6-leads 60 Hz 2-poles 575V D P2=04kW/40hp 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=90kW 6-leads 60 Hz 2-poles 440V-460V D P2=04kW/ 40hp 6-leads 60 Hz 2-poles 380V D P2=04kW/40hp 6-leads 50 Hz 2-poles 400V D P2=90kW 6-leads 60 Hz 2-poles 400V D P2=04kW/40hp 2-leads 60 Hz 2-poles 460V DSER 380V Y// P2=04kW/40hp 6-leads 50 Hz 2-poles 400V-440V D P2=90kW 2-leads 60 Hz 2-poles 230V D// P2=04kW/40hp Qty/Version End sleeve 6 MM2; L=2 MM Plate SENSOR CONNECTED T-T2 6-leads 50 Hz 2-poles 500V-550V D P2=90kW 6-leads 60 Hz 2-poles 575V-600V D P2=04kW/ 40hp 6-leads 50 Hz 2-poles 550V D P2=90kW 2-leads 50 Hz 2-poles 500V Y// 000V YSER P2=90kW Diffuser coat. NBR Diffuser coat. NBR Drilled acc. to: EN tab Diffuser coat. NBR Drilled acc. to: ASME B ;tab Diffuser coat. PU Diffuser coat. PU Drilled acc. to: EN tab Diffuser coat. PU Drilled acc. to: ASME B ;tab Adjusting washer 0.5 MM N Diffusor material: NBR H Diffusor material: NBR N Diffusor material: Polyurethane rubber (PU) H Diffusor material: Polyurethane rubber (PU) Mega Parts List

21 Spare Parts Pos. No Part. No Denomination Adjusting washer 0.5 MM N Diffusor material: NBR N Diffusor material: Polyurethane rubber (PU) Washer 0.3 MM H Diffusor material: NBR H Diffusor material: Polyurethane rubber (PU) Washer 0.3 MM H Adjusting washer 0.5 MM H Diffuser coat. NBR Diffuser coat. PU Diffuser coat. NBR Diffuser coat. PU Diffuser disc coated NBR Diffuser disc coated PU Diffuser disc coated NBR Diffuser disc coated PU Wear ring NBR Wear ring PU Wear ring NBR Wear ring PU 44 - Cap 0X20 PVC Cap 6X6 PVC 44 - Cap 0X20 PVC Cap 7X6 PVC 46 - Cap 46 - Cap 32X45 PVC Cable lug Plain washer Stator housing Stator housing PREPARED FOR ZINC ANODES Cover Bearing housing low Oil housing Bearing cover Diffuser coat. PU Diffuser coat. NBR Sleeve Hydraulic end material: Full Hydraulic end material: Partial Qty/Version Mega Parts List 9

22 Spare Parts Pos. No Part. No Denomination Sleeve compl. Hydraulic end material: Zinc anode kit H 57, Hex.socket hd screw M6X20-A , Hex.socket hd screw M6X30-A , Lock nut M6-A , Plain washer 902-6,4X8X,6 57, Anode Zinc anode kit N 57, Hex.socket hd screw M6X20-A , Hex.socket hd screw M6X30-A , Lock nut M6-A , Plain washer 902-6,4X8X,6 57, Anode Strainer Hydraulic end material: Full Hydraulic end material: Partial Strainer unit Hydraulic end material: Strainer Hydraulic end material: Full Hydraulic end material: Partial Strainer unit Hydraulic end material: Strainer compl. SS Hydraulic end material: Full Strainer compl. Hydraulic end material: Stud Hydraulic end material: Stud 2X40-A4-70 Hydraulic end material: Full Marking tape Roller bearing Retaining ring SGA Retaining ring SGH Retaining ring SGH 5 Qty/Version Mega Parts List

23 Spare Parts Pos. No Part. No Denomination O-ring 34.3X5.7 NBR Washer Bearing housing Washer Sleeve Hexagon head screw M2X25-A Hexagon head screw M6X35-A Plain washer 2-A Plain washer 6-A2-A Stand compl Cap Plug O-ring kit 800, O-ring 9.2X3 NBR 2 800, O-ring 69.2X5.7 NBR 800, O-ring 269.3X5.7 NBR 800, O-ring 279.3X5.7 NBR 2 800, O-ring 49.3X5.7 NBR 800, O-ring 499.3X5.7 NBR 800, O-ring 229.3X5.7 NBR 800, O-ring 49.3X5.7 NBR 800, O-ring 69.2X5.7 NBR 800, O-ring 69.5X3 NBR 2 800, O-ring 9.2X3 NBR 2 800, O-ring 34.3X5.7 NBR Zinc anode kit N Zinc anode kit H Basic repair kit Oil ISO VG 32 * Grease * Grease * Grease * Qty/Version Mega Parts List 2

24 Grindex Gesällvägen Sundbyberg Sweden Tel: Fax: Visit our Web site for the latest version of this document and more information The original instruction is in English. All non-english instructions are translations of the original instruction. 204 Grindex 88550_.0_en-US_204-_GPL