The VFS60 is a high-resolution. Excellent concentricity and excep- immunity. tional robustness are achieved

Size: px
Start display at page:

Download "The VFS60 is a high-resolution. Excellent concentricity and excep- immunity. tional robustness are achieved"

Transcription

1 to suit your individual requirements. Possible product variations: Through hollow or blind hollow shaft Cable outlet universal.5 m or 1.5 m oto: Wieland Werke G Number of lines from 1 up to 5.53 Interfaces TTL or HTL and versions with programmable Number of lines up to 5.53 Motor eedback ystem T The is a high-resolution level of output signals Zero pulse width programmable by customer n Electrically insulating hollow incremental hollow shaft encoder shaft clamping arrangement is avaiin a mm housing. lable for special applications, significantly increasing the interference Excellent concentricity and excep- immunity. tional robustness are achieved RoH 22/95/EC thanks to the large distance between the ball bearings which support the encoder shaft series encoders have been designed for arduous applications in harsh industrial environments, and especially for mounting to asynchronous motors UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr h e e t D elect the motor feedback system a t a : Motor eedback ystem for installation on asynchronous motors

2 Motor eedback ystem blind hollow shaft n Cable outlet Number of lines up to 5.53 Motor eedback ystem n Protection class IP 5 n Electrical interfaces TTL, HTL Dimensional drawing blind hollow shaft, cable outlet Ø X Ø 35 Ø Ø 3 ±.2 72 ±.3 Ø Customer-side min. 15 max. 42 General tolerances according to DIN IO 278-mk 1 Cable-Ø = 5. ±.2 mm Bending radius R = 3 mm Wire allocation, cable 8-core RoH 22/95/EC ccessories Connection systems (page 1/17) Mounting systems (page 1/17) Colour ignal Explanation of wires TTL, HTL Brown ignal line White ignal line Black B ignal line Pink B ignal line Yellow Z ignal line Lilac Z ignal line Blue GND Ground connection of the encoder Red +U s upply voltage creen creen creen 2) Potential free to housing 2) creen on the encoder side connected to the housing. On the control side connected to earth. 2 ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-29

3 Technical Data to DIN blind hollow shaft haft diameter 8, 1, 12, 14, 15 mm a. 3/8", 1/2", 5/8" Electrical interface , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Number of lines per revolution E B 1, 124, 1, 124, 2, , , 49, , , 3278, Mass.2 kg Moment of inertia to the rotor 4 gcm 2 Measuring step 9 electric/number of lines Reference signal Number 1 Position 9 electr., gated with and B Error limits Measuring step deviation Max. output frequency TTL/R422 HTL/push-pull TTL/HTL programmable Operating speed ngular acceleration 5 x 1 5 rad/s 2 Operating torque at 2 C. Ncm tarting torque at 2 C.8 Ncm Permissible shaft loading radial tatic/dynamic axial tatic/dynamic Bearing lifetime 3 x 1 9 revolutions Working temperature range torage temperature range (without package) Permissible relative humidity 2) 9 % EMC 3) Resistance To shocks 4) To vibration 5) Protection class to IEC 529 haft side Housing side Cable outlet Load current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable No-load operating current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Initialisation time after power on , TTL/R , TTL/R , HTL/Push pull 4,5 32, TTL/HTL programmable ±.3 ±.5 ±.3 ±.2 ±.1 ±.1 3 khz khz 82 khz 3 khz khz 82 khz 82 khz, min -1, min -1, min -1 ±.3/±.1 mm ±.3/±.1 mm ±.3/±.5 mm ±.5/±.2 mm ±.5/±.2 mm ±.5/±.1 mm C C C C C C 5 g/ ms 7 g/ ms g/ ms 2 g/1 2 Hz 3 g/1 2 Hz 2 g/1 2 Hz IP 5 IP 5 IP 5 IP 7 IP 7 IP 7 max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m m max. 3 ms elf-warming 3.3k/1, min -1 when applying, note working temperature range 2) Condensation of the optical scanning not permitted 4) To EN ) To EN ) To EN 1--2 and EN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 3

4 Motor eedback ystem blind hollow shaft Order information TTL and HTL interface Motor eedback ystem, blind hollow shaft Point Point 7 B Point (cp. technical data page 3) i E i B Mechanical interface Blind hollow shaft 8 mm Blind hollow shaft 3/8" Blind hollow shaft 1 mm Blind hollow shaft 12 mm Blind hollow shaft 1/2" Blind hollow shaft 14 mm Blind hollow shaft 15 mm = B = C = D = E = = G = H Electrical interface , TTL/R422 = 1 32, TTL/R422 = C 1 32, HTL/Push pull = E Connection type i No. of lines Cable 8-core, universal.5 m Cable 8-core, universal 1.5 m = J = K The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. lways 5 characters in clear text election depending on the type, see below. Blind hollow shaft 5/8" = J E Number of lines per revolution Others on request B Number of lines per revolution Others on request Order example Motor eedback ystem, type E, blind hollow shaft 1 mm, Electrical interface 1 32, HTL/push-pull, cable 8-core, universal.5 m, number of lines 124 Point E Point 7 B Point 9 D E 1 J ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 9-29

5 Order information TTL or HTL programmable Motor eedback ystem, blind hollow shaft Point Point 7 Point B (cp. technical data page 3) i Mechanical interface Blind hollow shaft 8 mm Blind hollow shaft 3/8" Blind hollow shaft 1 mm Blind hollow shaft 12 mm Blind hollow shaft 1/2" Blind hollow shaft 14 mm = B = C = D = E = = G Electrical interface Connection type i No. of lines 4,5 32, TTL/HTL programmable = P Cable 8-core, universal.5 m Cable 8-core, universal 1.5 m = J = K The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. actory-programmed to 124 Blind hollow shaft 15 mm = H Blind hollow shaft 5/8" = J Order example Motor eedback ystem, type, blind hollow shaft 8 mm, programmable number of lines from , Electrical interface 5 32, cable 8-core, universal.5 m Point Point 7 Point B B P J actory-programmed number of lines: 124, level of output signal: TTL Programming Tool for PGT Contacts 12 dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M12 8-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-2D8-GM5C dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M23 12-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-3D8-GM5C UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 5

6 Motor eedback ystem through hollow shaft metal n Cable outlet Number of lines up to 5.53 Motor eedback ystem n Protection class IP 5 n Electrical interfaces TTL, HTL Dimensional drawing through hollow shaft metal, cable outlet Ø X Ø Ø 72 ±.3 Ø 3 ±.2 2 min. 15 General tolerances according to DIN IO 278-mk Customer-side 1 Cable-Ø = 5. ±.2 mm Bending radius R = 3 mm Wire allocation, cable 8-core Colour ignal Explanation of wires TTL, HTL Brown ignal line White ignal line Black B ignal line Pink B ignal line Yellow Z ignal line Lilac Z ignal line RoH 22/95/EC ccessories Connection systems (page 1/17) Mounting systems (page 1/17) Blue GND Ground connection of the encoder Red +U s upply voltage creen creen creen 2) Potential free to housing 2) creen on the encoder side connected to the housing. On the control side connected to earth. ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-28

7 Technical Data to DIN through hollow shaft metal haft diameter 8, 1, 12, 14, 15 mm a. 3/8", 1/2", 5/8" Electrical interface , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Number of lines per revolution E B 1, 124, 1, 124, 2, , , 49, , , 3278, Mass.2 kg Moment of inertia to the rotor 4 gcm 2 Measuring step 9 electric/number of lines Reference signal Number 1 Position 9 electr., gated with and B Error limits Measuring step deviation Max. output frequency TTL/R422 HTL/push-pull TTL/HTL programmable Operating speed ngular acceleration 5 x 1 5 rad/s 2 Operating torque at 2 C. Ncm tarting torque at 2 C.8 Ncm Permissible shaft loading radial tatic/dynamic axial tatic/dynamic Bearing lifetime 3 x 1 9 revolutions Working temperature range torage temperature range (without package) Permissible relative humidity 2) 9 % EMC 3) Resistance To shocks 4) To vibration 5) Protection class to IEC 529 haft side Housing side Cable outlet Load current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable No-load operating current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Initialisation time after power on , TTL/R , TTL/R , HTL/Push pull 4,5 32, TTL/HTL programmable ±.3 ±.5 ±.3 ±.2 ±.1 ±.1 3 khz khz 82 khz 3 khz khz 82 khz 82 khz 9, min -1 9, min -1 9, min -1 ±.3/±.1 mm ±.3/±.1 mm ±.3/±.5 mm ±.5/±.2 mm ±.5/±.2 mm ±.5/±.1 mm C C C C C C 5 g/ ms 7 g/ ms g/ ms 2 g/1 2 Hz 3 g/1 2 Hz 2 g/1 2 Hz IP 5 IP 5 IP 5 IP 7 IP 7 IP 7 max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m m max. 3 ms elf-warming 3.3k/1, min -1 when applying, note working temperature range 2) Condensation of the optical scanning not permitted 4) To EN ) To EN ) To EN 1--2 and EN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 7

8 Motor eedback ystem through hollow shaft metal Order information TTL and HTL interface Motor eedback ystem, through hollow shaft metal Point Point 7 T Point (cp. technical data page 7) i E i B Mechanical interface Through hollow shaft Metal 8 mm Metal 3/8" Metal 1 mm Metal 12 mm Metal 1/2" Metal 14 mm Metal 15 mm Metal 5/8" = B = C = D = E = = G = H = J Electrical interface , TTL/R422 = 1 32, TTL/R422 = C 1 32, HTL/push-pull = E Connection type i No. of lines Cable 8-core, universal.5 m Cable 8-core, universal 1.5 m = J = K The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. lways 5 characters in clear text election depending on the type, see below. E Number of lines per revolution Others on request B Number of lines per revolution Others on request Order example Motor eedback ystem, type E, through hollow shaft 1 mm, Electrical interface 1 32, HTL/push-pull, cable 8-core, universal.5 m, number of lines 124 Point E Point 7 T Point 9 D E 1 J ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 9-29

9 Order information TTL or HTL programmable Motor eedback ystem, through hollow shaft metal Point Point 7 Point T (cp. technical Mechanical interface Electrical interface Connection type i No. of lines data page 7) Through hollow shaft 4,5 32, TTL/HTL programmable = P Cable 8-core, universal.5 m = J actory-programmed i Metal 8 mm = B Cable 8-core, universal 1.5 m = K to 124 Metal 3/8" Metal 1 mm Metal 12 mm Metal 1/2" Metal 14 mm Metal 15 mm Metal 5/8" = C = D = E = = G = H = J The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. Order example Motor eedback ystem, type, through hollow shaft 8 mm, programmable number of lines from , Electrical interface 5 32, cable 8-core, universal.5 m Point Point 7 Point T B P J actory-programmed number of lines: 124, level of output signal: TTL Programming Tool for PGT Contacts 12 dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M12 8-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-2D8-GM5C dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M23 12-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-3D8-GM5C UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 9

10 Motor eedback ystem through hollow shaft plastic Number of lines up to 5.53 Motor eedback ystem n Insulating hollow shaft clamping n Cable outlet n Protection class IP 5 n Electrical interfaces TTL, HTL Dimensional drawing through hollow shaft plastic, cable outlet ±1 1 Ø 22 Ø Ø ±.3 Ø 3 ± Ø X min. 48 General tolerances according to DIN IO 278-mk Customer-side 1 Cable-Ø = 5. ±.2 mm Bending radius R = 3 mm Wire allocation, cable 8-core RoH 22/95/EC ccessories Connection systems (page 1/17) Mounting systems (page 1/17) Colour ignal Explanation of wires TTL, HTL Brown ignal line White ignal line Black B ignal line Pink B ignal line Yellow Z ignal line Lilac Z ignal line Blue GND Ground connection of the encoder Red +U s upply voltage creen creen creen 2) Potential free to housing 2) creen on the encoder side connected to the housing. On the control side connected to earth. 1 ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-29

11 Technical Data to DIN through hollow shaft plastic haft diameter 1, 12, 14, 15 mm and 3/8", 1/2" Electrical interface , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Number of lines per revolution E B 1, 124, 1, 124, 2, , , 49, , , 3278, Mass.2 kg Moment of inertia to the rotor 4 gcm 2 Measuring step 9 electric/number of lines Reference signal Number 1 Position 9 electr., gated with and B Error limits Measuring step deviation Max. output frequency TTL/R422 HTL/push-pull TTL/HTL programmable Operating speed ngular acceleration 5 x 1 5 rad/s 2 Operating torque at 2 C. Ncm tarting torque at 2 C.8 Ncm Permissible shaft loading radial tatic/dynamic axial tatic/dynamic Bearing lifetime 3 x 1 9 revolutions Working temperature range torage temperature range (without package) Permissible relative humidity 2) 9 % EMC 3) Resistance To shocks 4) To vibration 5) Protection class to IEC 529 haft Housing side Cable outlet Load current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable No-load operating current , TTL/R , TTL/R , HTL/push-pull 4,5 32, TTL/HTL programmable Initialisation time after power on , TTL/R , TTL/R , HTL/Push pull 4,5 32, TTL/HTL programmable ±.3 ±.5 ±.3 ±.2 ±.1 ±.1 3 khz khz 82 khz 3 khz khz 82 khz 82 khz 9, min -1 12, min -1 12, min -1 ±.3/±.1 mm ±.3/±.1 mm ±.3/±.5 mm ±.5/±.2 mm ±.5/±.2 mm ±.5/±.1 mm C C C C C C 5 g/ ms 7 g/ ms g/ ms 2 g/1 2 Hz 3 g/1 2 Hz 2 g/1 2 Hz IP 5 IP 5 IP 5 IP 7 IP 7 IP 7 max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m max. 3 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m 4 m m max. 3 ms elf-warming 3.3k/1, min -1 when applying, note working temperature range 2) Condensation of the optical scanning not permitted 4) To EN ) To EN ) To EN 1--2 and EN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 11

12 Motor eedback ystem through hollow shaft plastic Order information TTL and HTL interface Motor eedback ystem, through hollow shaft plastic Point Point 7 T Point (cp. technical data page 1 i E i B Mechanical interface Through hollow shaft Plastic 3/8" = 3 Plastic 1 mm = 4 Plastic 12 mm = 5 Plastic 1/2" = Plastic 14 mm = 7 Plastic 15 mm = 8 Electrical interface , TTL/R422 = 1 32, TTL/R422 = C 1 32, HTL/Push pull = E Connection type i No. of lines Cable 8-core, universal.5 m Cable 8-core, universal 1.5 m = J = K The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. lways 5 characters in clear text election depending on the type, see below. E Number of lines per revolution Others on request B Number of lines per revolution Others on request Order example Motor eedback ystem, type E, through hollow shaft 1 mm, Electrical interface 1 32, HTL/push-pull, cable 8-core, universal.5 m, number of lines 124 Point E Point 7 T Point 9 4 E 1 J ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-29

13 Order information TTL or HTL programmable Motor eedback ystem, through hollow shaft plastic Point Point 7 Point T (cp. technical Mechanical interface Electrical interface Connection type i No. of lines data page 1 Through hollow shaft 4,5 32, TTL/HTL programmable = P Cable 8-core, universal.5 m = J actory-programmed i Plastic 3/8" = 3 Cable 8-core universal 1.5 m = K to 124 Plastic 1 mm = 4 Plastic 12 mm = 5 Plastic 1/2" = Plastic 14 mm = 7 Plastic 15 mm = 8 The universal cable outlet is positioned in such a way, that it is possible to lay the cable in a radial or axial direction without kinking it. Order example Motor eedback ystem, type, through hollow shaft 14 mm, programmable number of lines from , Electrical interface 5 32, cable 8-core, universal.5 m Point Point 7 Point T 7 P J actory-programmed number of lines: 124, level of output signal: TTL Programming Tool for PGT Contacts 12 dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M12 8-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-2D8-GM5C dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M23 12-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-3D8-GM5C UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 13

14 ignal outputs, Interfaces, Programming Tool Interfaces Electrical interfaces upply voltage Output TTL/R422 TTL/R422 HTL/push-pull HTL/TTL programmable Incremental pulse diagram 9 el. 3 el. Measuring step B B Z Z CW with view on the encoder shaft in direction "", see dimensional drawing. UDIN - 8, avenue de la malle aint Brice Courcelles 14 ICK-TEGMNN Tel : ax : Web : http: info@audin.fr 4-29

15 Programming Tool Programming Tool for PGT Contacts 12 dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M12 8-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-2D8-GM5C dapter cable PGT-8- incremental with Cable connector UB-D 9-pin male and cable connector M23 12-pin female, ready-made with cable 8-core, 4 x 2 x,8 mm 2, with screening DL-3D8-GM5C Zero pulse width 9, 18 or 27 programmable 9 el. 3 el. Measuring step B B Z1 9 el. gated with channel and B Z2 18 el. gated with channel B Z3 18 el. gated with channel Z4 27 el. gated with channel or B CW with view on the encoder shaft in direction "" 4-29 UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 15

16 ccessories Connection systems/mounting systems Dimensional drawings and ordering information crew-in system M23, 12-pin Cable connector M23 female, 12-pin, straight, screened Cable connector M23 male, 12-pin, straight, screened Contacts Contacts DO-2312-G TE-2312-G General tolerances according to DIN IO 278-mk General tolerances according to DIN IO 278-mk Cable connector M23 male, 12-pin, straight, screened, for rear panel installation TE-2312-GX Contacts 12 General tolerances according to DIN IO 278-mk Cable connector M23 female, 12-pin, straight, cable 11-core, 4 x 2 x x x.14 mm 2 with screening, cable diameter 7.8 mm DOL-2312-G2ML3 DOL-2312-G7ML Contacts Cable length 2. m 7. m DOL-2312-G1ML m DOL-2312-G15ML m 2DOL-2312-G2ML m 2DOL-2312-G25ML m 2DOL-2312-G3ML m Cable connector M23 female, 12-pin, straight, cable 11-core, 4 x 2 x x x.14 mm 2 with screening, capable of beeing dragged, cable diameter 7.8 mm DOL-2312-G1M5M3 DOL-2312-G3MM Contacts m 3. m DOL-2312-G5MM m Cable length DOL-2312-G1MM m 2DOL-2312-G2MM m 2DOL-2312-G3MM m 1 ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-29

17 Dimensional drawings and ordering information Cables Cable 8-core, per metre, 4 x 2 x.15 mm 2, with screening, cable diameter 5. mm Wires LTG-238-MWENC Cable 11-core, per metre, 4 x 2 x x x.14 mm 2, with screening, cable diameter 7.5 mm Wires LTG-2411-MW Cable 12-core, per metre, 4 x 2 x x x.14 mm 2, with screening, capable of beeing dragged, cable diameter 7.8 mm Wires LTG-2512-MW Cable 12-core, per metre, 4 x 2 x x x.14 mm 2, with screening, capable of beeing dragged, cable diameter 7.8 mm Wires Explanation LTG-212-MW U and salt water resistant Cable 8-core inc. sealing, 4 x 2 x.15 mm 2, with screening, cable diameter 5. mm DOL-J8-GM Cable length.5 m DOL-J8-G1M m DOL-J8-G3M m DOL-J8-G5M m DOL-J8-G1M m 4-29 UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 17

18 Mounting versions urther mounting versions ersion 1 BE-D1D/ Ø 1.81 ±.25 R5 Ø Ø 52 ±.5 Ø Ø Ø 51 ± (24 ) :1 Ø (3x) (25) (81.95) ersion 2 BE-D2D/ Ø 1.81 ±.25 Ø 1.81 ±.25 Ø 1.81 ± R5 Ø 57.9 Ø 57.9 Ø Ø 52 Ø 52 Ø ±.5 52 ±.5 ±.5 Ø 42 Ø 42 Ø Ø 2.5 Ø 2.5 Ø Ø 51 Ø 51 ±.5 Ø 51 ±.5 ± (24 ) (24 ) (24 ) Ø Ø Ø (3x) (3x) (3x) (25) (25) (25) (178.95) (178.95) (178.95) 1:2 1:2 1:2 1:2 1: R5 R : :1 5:1 5: R z R1z 18 ICK-TEGMNN UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr 4-29

19 urther mounting versions ersion 3 BE-D3D/ Ø 1.81 ±.25 Ø Ø 52 ±.5 Ø Ø Ø 51 ±.5 (24 ) (25) R (3x) Ø (248.95) (5.55) - 5: UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr ICK-TEGMNN 19

20 /29-9-xx MD/3/xx Printed in Germany (29-4) ubject to change without notice. The specified product features and technical data do not represent any guarantee. TEG 4 2c int32 ustralia Phone tollfree sales@sick.com.au Belgium/Luxembourg Phone +32 () info@sick.be Brasil Phone sac@sick.com.br Ceská Republika Phone sick@sick.cz China Phone ghk@sick.com.hk Danmark Phone sick@sick.dk Deutschland Phone info@sick.de España Phone info@sick.es rance Phone info@sick.fr Great Britain Phone +44 () info@sick.co.uk India Phone info@sick-india.com Israel Phone info@sick-sensors.com Italia Phone info@sick.it Japan Phone +81 () support@sick.jp Nederlands Phone +31 () info@sick.nl Norge Phone austefjord@sick.no ICK G Waldkirch Germany ICK TEGMNN GmbH Donaueschingen Germany Österreich Phone +43 () office@sick.at Polska Phone info@sick.pl Republic of Korea Phone /4 kang@sickkorea.net Republika lovenija Phone +38 () office@sick.si România Phone office@sick.ro Russia Phone info@sick-automation.ru chweiz Phone contact@sick.ch ingapore Phone admin@sicksgp.com.sg uomi Phone sick@sick.fi verige Phone info@sick.se Taiwan Phone sales@sick.com.tw Türkiye Phone info@sick.com.tr United rab Emirates Phone info@sick.ae U/Canada/México Phone +1(952) tollfree info@sickusa.com More representatives and agencies in all major industrial nations at UDIN - 8, avenue de la malle aint Brice Courcelles Tel : ax : Web : http: info@audin.fr

VFS60: Motor Feedback System for installation on asynchronous motors

VFS60: Motor Feedback System for installation on asynchronous motors Data heet : Motor eedback ystem for installation on asynchronous motors elect the motor feedback system to suit your individual requirements. Possible product variations: Photo: Wieland Werke G Through

More information

wheel encoder! The DKV 60 incremental measuring and extremely compact solution for the direct determination of position and speed of a conveyor belt.

wheel encoder! The DKV 60 incremental measuring and extremely compact solution for the direct determination of position and speed of a conveyor belt. DKV 60: Incremental measuring wheel encoder The basis of the product is the DKS 40 incremental encoder. The DKS 40 and therefore the DKV 60 utilise Mini-Disc technology, making the DKV 60, extremely robust

More information

BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m

BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m Precise linear guidance, as required for other length measurement systems, is not necessary. The choice between

More information

DKS 40: Incremental Encoder

DKS 40: Incremental Encoder DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. In addition the DKS 4 has a very high protection

More information

DGS 35/34: Incremental Encoders for rough environmental conditions

DGS 35/34: Incremental Encoders for rough environmental conditions Possible product variations: 1/4 and /8 in solid shafts with H E E T elect your individual encoder! A T A /4: Incremental Encoders for rough environmental conditions square flange or servo mount, through

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions

DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions ,, 1/ and 3/34: Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variations: 1/4 and 3/8 in solid shafts with square flange or servo mount, through

More information

DFS60 Incremental Encoders. High-resolution, programmable encoder for complex applications and high operational demands

DFS60 Incremental Encoders. High-resolution, programmable encoder for complex applications and high operational demands P r o d u c t i n f o r m at i o n DFS60 Incremental Encoders High-resolution, programmable encoder for complex applications and high operational demands DFS60 Incremental encoders High-resolution, programmable

More information

DKS 40: Incremental Encoder

DKS 40: Incremental Encoder DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. Besides has the DKS 4 a very high protection

More information

WF next: Fork sensors for a wide range of applications

WF next: Fork sensors for a wide range of applications WF next: Fork sensors for a wide range of applications D ATA S H E E T Fork sensors TThe detection of labels, marks and double sheets, as well as holes and edges are typical applications for the new WF

More information

W 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful

W 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful Product group W BGS Photoelectric proximity switch Energ. Photoelectric proximity switch Photoelectric reflex switch W : Sub-iniature Photoelectric Switch Range: Super-Small and Powerful Even transparent

More information

ARS 20, ARS 25: Single-turn Absolute Encoders. Modular Design for tailor-made solutions.

ARS 20, ARS 25: Single-turn Absolute Encoders. Modular Design for tailor-made solutions. , : ingle-turn bsolute Encoders. Modular Design for tailor-made solutions. Maximum reliability as a result of opto-ics with Chip-on-Board technology quare flange, servo and face mount options with 1/4,

More information

CLV440/442 Bar Code Scanner

CLV440/442 Bar Code Scanner PRODUCT I NFORMATI ON CLV440/442 Bar Code Scanner Advanced line CLV440/ 442 Bar Code Scanner: Dynamic focus control Compact but powerful The bar code scanners CLV440/ 442 represent the newest members of

More information

P r o d u c t i n f o r m at i o n. Bar Code Scanner. Advanced line

P r o d u c t i n f o r m at i o n. Bar Code Scanner. Advanced line P r o d u c t i n f o r m at i o n CLV43/431 /432 Bar Code Scanner Advanced line CLV43/431/432 Bar Code Scanner: Fixed Focus Compact but powerful The bar code scanners CLV43, CLV431 and CLV432 represent

More information

Absolute, non-contact length measuring system

Absolute, non-contact length measuring system LinCoder L230: Absolute, non-contact length measuring system onto a ferromagnetic tape (steel tape) which, on the one hand, acts as a magnetic base and, on the other hand, as a form-stabilising assembly

More information

DFS60 Incremental Encoders. High-resolution, programmable encoder for sophisticated applications

DFS60 Incremental Encoders. High-resolution, programmable encoder for sophisticated applications Product information DFS60 Incremental Encoders High-resolution, programmable encoder for sophisticated applications DFS60 Incremental encoders High-resolution, programmable encoder for sophisticated applications

More information

Maximum reliability for the most aggressive environments. Encoder and motor feedback systems for wind power systems

Maximum reliability for the most aggressive environments. Encoder and motor feedback systems for wind power systems Industry Guide Maximum reliability for the most aggressive environments Encoder and motor feedback systems for wind power systems SICK STEGMANN a successful SICK Group company With customer-focused products,

More information

Incremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range

Incremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range ProduCt information Incremental Encoder DFS60 in a class of its own The high-resolution incremental encoder range PDF processed with CutePDF evaluation edition www.cutepdf.com DFS60 In a class of its own

More information

Linear encoders without bearings incremental System for linear motion feedback

Linear encoders without bearings incremental System for linear motion feedback Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system

More information

Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads

Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector

More information

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

Material: Weight: IP Rating: Cable: Connector:

Material: Weight: IP Rating: Cable: Connector: Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:

More information

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.

More information

W 190 L: Application-based Laser Technology, the optimum solution for demanding applications

W 190 L: Application-based Laser Technology, the optimum solution for demanding applications Photoelectric proximity switches Photoelectric reflex switches W 90 L: Application-based Laser Technology, the optimum solution for demanding applications Do your customers require reliable sensors suitable

More information

Type SCH94FO. Type SCH94FO. Description

Type SCH94FO. Type SCH94FO. Description Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical

More information

CLV430/ 431 /432 Bar Code Scanner

CLV430/ 431 /432 Bar Code Scanner PRODUCT I NFORM ATI ON CLV430/ 431 /432 Bar Code Scanner Advanced line CLV430/ 431 / 432 Bar Code Scanner: Fixed Focus Compact but powerful The bar code scanners CLV430, CLV431 and CLV432 represent the

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft

More information

Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181

Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181 Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation

More information

Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands: Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc

More information

Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands: Oil & Gas / Heavy Industry Type 2REX-H EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P n n n n n Compact design: 59 mm mounting depth for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response Parameterization: Resolution, code type, direction,

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings,

More information

Contactless encoder RI360P0-QR24M0-INCRX2-H1181

Contactless encoder RI360P0-QR24M0-INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED LED indicates measuring range Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024,

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment. Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

HOG 86. The incremental HeavyDuty encoder for highest demands

HOG 86. The incremental HeavyDuty encoder for highest demands HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design

More information

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide

More information

Contactless Encoder SSI RI360P0-QR24M0-HESG25X3-H1181

Contactless Encoder SSI RI360P0-QR24M0-HESG25X3-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Positioning element and aluminium ring not incl. output 25 bit, Gray-coded clock rate: 62.5 KHz 1 MHz Single or multiturn, length

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151

Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151 Compact, rugged housing Many mounting possibilities Status displayed via LED Measuring range indicated via LED Immune to electromagnetic interference Measuring range programmable via Easy Teach Output

More information

Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141

Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 16 bits singleturn Process value in 32 bit telegram 3 error bits 16 bits singleturn 15

More information

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance

More information

Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn Encoder

Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn Encoder Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Rexroth IndraControl VCP 20 Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn

More information

Speed sensor MiniCoder GEL 2471

Speed sensor MiniCoder GEL 2471 Speed sensor MiniCoder GEL 2471 for electrically conducting toothed-wheels Technical information version 10.02 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless

More information

Smart-Encoder : Optical Incremental

Smart-Encoder : Optical Incremental 1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution

More information

SENSICK WLL 190T High-End Sensor for fibre optic cable. Technical Description

SENSICK WLL 190T High-End Sensor for fibre optic cable. Technical Description SENSICK WLL 90 High-End Sensor for fibre optic cable echnical Description WLL 90 Photoelectric switches with fibre optic cable echnical description WLL 90 simple installation and structured functions he

More information

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles PRDS2 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 degrees in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Incremental encoder

More information

EZ Encoder : Optical Incremental

EZ Encoder : Optical Incremental 1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price

More information

Rack mounted telephone- and leased line modem for industrial applications

Rack mounted telephone- and leased line modem for industrial applications Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as

More information

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output

More information

ENC-MC58SN-L R-L1

ENC-MC58SN-L R-L1 MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses

More information

Incremental Rotary Encoders

Incremental Rotary Encoders Incremental Rotary Encoders Rotary Magnetic Incremental Encoder Encoders ELTRA are designed in order to control the position and the angular speed of moving mechanical axels. Rotary Incremental Eltra encoder

More information

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features: HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement

More information

ENC-CK58SN-L R-L1

ENC-CK58SN-L R-L1 CK58/ CK59/ CK60 Blind Hollow Shaft Encoder Series FETURES Standard Encoder for Heavy Industrial pplications Blind Hollow Shaft up to ø15mm 2 to 10,000 Cycles Per Revolution 8 to 40,000 Pulses Per Revolution

More information

Linear measuring technology

Linear measuring technology raw wire encoder 80 The draw wire mechanics 80 can be used up to a measuring length of 3 meters These draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

Incremental angle encoders based on the inductive AMOSIN Measuring Principle

Incremental angle encoders based on the inductive AMOSIN Measuring Principle Incremental angle encoders based on the inductive MOSIN Measuring Principle Product information ugust 2016 WMK2010 series Composed of K WMK2010 and measuring flange or measuring ring Grating period 1000µm

More information

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN

More information

Capacitive sensor BCT5-S18-UP6X2T-H1151

Capacitive sensor BCT5-S18-UP6X2T-H1151 M18 1 threaded barrel Plastic, PA12-GF30 Teach-in and configuration via buttons on the device, pin 5 and IO-Link Wiring Diagram Functional principle Type designation Ident no. 2101100 Remark to product

More information

Series SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4...

Series SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4... LVDT Inductive Position Transducer Series SM ø12 mm ranges 2...200 mm linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6 out: AC, 0...10 V, 0...5 V, 4...20 ma with external or integrated cable electronics repeatability

More information

Ø50mm Shaft Multi-Turn Absolute Type

Ø50mm Shaft Multi-Turn Absolute Type Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn

More information

Contactless encoder Ri360P0-QR24M0-HESG25X3-H1181

Contactless encoder Ri360P0-QR24M0-HESG25X3-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Positioning element and aluminium ring not incl. SSI output 25 bit, Gray-coded SSI clock rate: 62.5 KHz 1 MHz Single or multiturn,

More information

EZ Encoder : Optical Incremental (P Series)

EZ Encoder : Optical Incremental (P Series) 1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user

More information

Absolute encoder TRT with PROFINET interface

Absolute encoder TRT with PROFINET interface Absolute encoder TRT with PROFINET interface Document no.: TRT 12886 KE Date: 07.02.2017 ingleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration

More information

DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure

DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure Without Media Isolation accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Contacts, or independent contacts freely configurable Analogue output wire:... 0

More information

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor Industrial Pressure Transmitter with i²c interface Stainless Steel Sensor Accuracy according to IEC 60770: standard: ± 0. % FSO option: ± 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Digital

More information

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded

More information

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet Cable Extension Position Sensors with internal magnetic encoder Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does

More information

Accessories. Servo Motors. Servo Motors B-45. Accessories

Accessories. Servo Motors. Servo Motors B-45. Accessories Servo Motors Servo Motors Accessories Accessories Introduction NX Accessories Page Cables B-46 Flexible Couplings B-50 Control Module B-51 Data Setting Software B-51 Accessory Sets B-52 Regeneration Units

More information

Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS

Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information

More information

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Scott Hewitt, President SICK STEGMANN, INC. Dayton, OH www.stegmann.com sales@stegmann.com 800-811-9110 The

More information

AC diagonal module Ø 200 mm

AC diagonal module Ø 200 mm max. 850 m /h C diagonal module Ø 00 mm Material: Housing: Plastic P Support bracket: Plastic P Impeller: Plastic P Rotor: Coated in black Number of blades: 7 Direction of air flow: "V" Direction of rotation:

More information

Product Data Sheet 8506 VW-691

Product Data Sheet 8506 VW-691 The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE

More information

Ultrasonic Sensor Diffuse Mode Sensor RU40U-M18E-LIU2PN8X2T-H1151

Ultrasonic Sensor Diffuse Mode Sensor RU40U-M18E-LIU2PN8X2T-H1151 Smooth sonic transducer face Cylindrical housing M18, potted Connection via M12 x 1 male Teach range adjustable via pushbutton or adapter Temperature compensation Blind zone: 2.5 cm Range: 40 cm Resolution:

More information

Time meter electronic

Time meter electronic Time meter electronic Universal with dual functions CODIX 52U 000000 0... 30V DIN 24 x 48 Power supply dimensions -0 +50 65 Wide temperature range High IP protection rating Powerful Fast count input Input

More information

Safety Light Curtains GuardShield

Safety Light Curtains GuardShield Description The Allen-Bradley Guardmaster safety light curtain is an economical, fully featured, Type 4 safety light curtain in a uniquely styled housing. safety light curtains are general purpose presence

More information

LD OEM/LD PDS/LD PeCo

LD OEM/LD PDS/LD PeCo LD OEM/LD PDS/LD PeCo Features LD OEM/PDS: 360 field of view LD OEM: the basic platform to LD PeCo: 90 field of view provide customized software 14,400 Hz scan rate programs on board and offers the Class

More information

Photoelectrics Through-beam Type PA18C.T..., DC

Photoelectrics Through-beam Type PA18C.T..., DC Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:

More information

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

Product Data Sheet 4656 ZW

Product Data Sheet 4656 ZW The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE

More information

Centrifuge 5418/5418 R

Centrifuge 5418/5418 R Register your instrument! www.eppendorf.com/myeppendorf Operating Manual Technical data 41 9 Technical data 9.1 Power supply Centrifuge 5418 Mains connection Centrifuge 5418 R 230 V, 50 Hz 60 Hz 120 V,

More information

DATA SHEET Panorama Rudder Indicator, TRI-2

DATA SHEET Panorama Rudder Indicator, TRI-2 DATA SHEET Panorama Rudder Indicator, TRI-2 Class 1 accuracy on CAN version Readable from up to 5 metres Single and dual CAN or analogue interface LED illumination DEIF A/S Frisenborgvej 33 DK-7800 Skive

More information

Inductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151

Inductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151 Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interferences Extremely short blind zones 12 bit resolution 4-wire, 15 30 VDC Analog

More information

Hour Meters / Timers, electronic

Hour Meters / Timers, electronic Hour Meters / Timers, electronic LED Timers Codix 523 For use as a timer, hour meter or short-time meter Pulse width measurement (operating time) Time interval measurement (start/stop) DC 000000 0... 30V

More information

MAGNETIC TAPE. Series MB. incremental scale. Key-Features:

MAGNETIC TAPE. Series MB. incremental scale. Key-Features: MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available

More information

estat20 Electronic Humidistat with remote sensor head Technical data Electrical data Humidity Temperature +125 C

estat20 Electronic Humidistat with remote sensor head Technical data Electrical data Humidity Temperature +125 C Galltec ess- und Regeltechnik GmbH EA ensortechnik GmbH D-71145 Bondorf. Germany D-07987 ohlsdorf-teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-62704-0. Fax +49(0)3661-62704-20

More information

RoHS. All incremental or absolute Sendix encoders with clamping flange (centering collar 36 mm) and 10 mm shaft diameter (shaft 10x20 mm) can be used.

RoHS. All incremental or absolute Sendix encoders with clamping flange (centering collar 36 mm) and 10 mm shaft diameter (shaft 10x20 mm) can be used. 1) RoHS imes Kit T is a flexible length measuring kit for the measurement of positions and speeds The complete system is easy to mount and compensates unevennesses and mounting tolerances in the application

More information

TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN

TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN Main features Ranges: from: 0...1000 to 0...5000 bar Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc

More information

Ultrasonic Sensor Diffuse Mode Sensor RU600U-EM30E-LIU2PN8X2T-H1151/3GD

Ultrasonic Sensor Diffuse Mode Sensor RU600U-EM30E-LIU2PN8X2T-H1151/3GD ATEX II 3 G approval Gases and vapors IIC group, zone 2 Dusts IIIC group, zone 22 When used in Ex areas, the special conditions of the approval must be observed Safety clips to prevent inadvertent detachment

More information

LXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O

LXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number

More information

MODEL HS35 DRAWWORKS OPTICAL ENCODER

MODEL HS35 DRAWWORKS OPTICAL ENCODER MODEL HS35 DRAWWORKS OPTICAL ENCODER Product Description This specially configured DrawWorks Model HS35 encoder combines rugged, heavy-duty features into a unique through-shaft style for use as a winchturns

More information

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved

More information