A Motor can be in many groups, by assigning additional channel# on it.
|
|
- Georgia Jennings
- 6 years ago
- Views:
Transcription
1 Timer Remote Control Instruction How to use the channel numbers - There are 32 channels on the Remote Control Timer you can assign to Curtain Motor(s). To operate the Motors individually by itself only, assign an unique channel# on each Motor. To operate a group of Motors simultaneously, assign the motors one by one the identical channel#. You may assign 1 or more channels to each Motor. (i.e. Motor can be operated individually or in a group) e.g. If there are 2 Motors (we call it Motor A and Motor B) in the house, we can assign them as follow: Motor A: channel # 1 and Channel # 2 Motor B: channel # 1 and Channel # 3 - When select channel #1 on the Remote Control, both motors will be operated at the same time. - When select channel #2 on the Remote Control, only Motor A is operated. - When select channel #3 on the Remote Control, only Motor B is operated. A Motor can be in many groups, by assigning additional channel# on it. How to use operations - There are 64 operations on the Remote Control Timer can be assigned to Curtain Motor(s). Opening a curtain or Closing a curtain is considered as an operation. Back of the Remote Control Timer Bottom view of the Motor LED Pin Hole Open Stop Close SET F1 Clock button 1
2 How to assign a channel# to the Motor Case 1: (the Motor is already programmed and working with another Remote Control) - Close the curtain. i) Press the + or - on the Timer Control to select a channel# (from 1 to 32). ii) Use a pin to press and hold the Pin Hole on the bottom of the Motor for 5 seconds, till the LED next to the pin hole stays on solid. Release the pin. iii) Press the Open button on the Timer Control 3 times till the Carrier on the Track starts moving. Let it move to the end. Done. Case 2: (the Motor is first time being programmed) - Unplug the Motor power. - Hand move the Master Carrier on the track back and forth the whole track a couple times to make sure the Master Carrier travels smoothly on the whole track. - Move the Master Carrie to about half way of open or close on the track. - Plug in power for the Motor. i) Press the + or - on the Timer Control to select a channel# (from 1 to 32). ii) Use a pin to press and hold the Pin Hole at the bottom of the Motor for 5 seconds, till the LED next to the pin hole stays on solid. Release the pin. iii) Press the Open button on the Timer Control 3 times till the Carrier on the Track starts moving. Let it move to the end. iv) Press the Close button on the Timer Control a few times till the Carrier on the Track starts moving to the other end. Let it move to the end. v) Press the Open button on the Timer Control, the Carrier on the Track starts moving. Let it move to the end. Done. The curtain can be operated by the Timer Control to open, close or stop now. Note You may assign additional channel# to the same Motor by using step i) to iii) only. Set the Hour / Minute / Day of the week i) Use a pin to press and hold the Clock button on the back of the Timer Control, until the clock symbol appears on the upper left of the front display. Now the 2 digits hour keeps blinking. ii) Press + or - to select the current hour, press Stop button to confirm. Now the 2 digits minute keeps blinking. iii) Press + or - to select the current minute, press Stop button to confirm. iv) Press + or - to select the day of the week. (1,2, 7 represents Mon., Tuesday, Sunday) iv) Press F1 on the back of the Timer Control to save and exit. 2
3 Fix the # of total channels - There are 32 channel indicator on the Timer Control. It can be modified as follow: i) Use a pin to press and hold the SET button on the back of the Timer Control, until the repair symbol appears. ii) Press + or - to select the total # of channel desired. iii) Press F1 on the back of Timer Control to save and exit. Scheduling to open / close the curtain There are 64 scheduling. This is 1 st scheduling as shown on the screen. Press + to go to the next scheduling. Press the clock button 5 times, wait 5 seconds, the "clock" and "repair" symbols will appear on upper left corner as shown in the next picture. Press - to go to the previous scheduling. confirm and move to next step. Hour Minute It shows the channel # to be scheduled for the operation of open/close the curtain Press + or to select the value of Hour or Minute. Press + or to change the channel # to be scheduled for the operation. confirm the value and move to next step. confirm the channel and move to next step. 3
4 It indicates the operation of Open or Close the curtain. Press + or - to select the operation of Open or Close. confirm the operation and move to next step. 4
5 The Bar(s) on the top row means to repeat the operation on that day every week. If the Bar does not appear, it means the operation only works once for the current week only. The 7 Bars on the bottom row represents Monday to Sunday from left to right. Step 1 Press + or - to select the day of the week (Monday to Sunday). The bar blinks representing the day selected. Step 2 Press the Open button to toggle the function of repeating the operation every week or not. The top bar shows up is to repeat the operation on that day every week. The top bar does not show up is not to repeat but only work once on the current week. Step 3 Repeat the above step 1 and 2 for all 7 days one by one. Then press F1 on the back of the Remote to save and exit. Now you have finished 1 operation scheduling. You will need to repeat the above process for more operations. e.g. If you just did the open the curtain scheduling, you will need to do the closing curtain scheduling. Important Note - The scheduling must be different for each operation or channel. It can only send one command at a time to 1 channel. Do NOT set 2 identical hour/minute. It has to be at least 1 minute apart for different 5
6 channel#. Write down the time (hour and minute), channel#, operation (open or close) on a piece of paper to avoid mistake or confusion before programming it. Reset to factory setting - Use a pin to press and hold the clock button on the back of the Timer Control, simultaneously press the stop button of the Timer Control for a few seconds until the screen flashes. Done. - All schedules are erased. - It returns to factory setting as follow: - 32 channels - hour / minute : 00 / 00 - current channel: 01 Reverse the Motor Direction i) Use a pin to press and hold the pin hole on the bottom of the Motor for 5 seconds, till the LED next to the pin hole stays on solid. Release the pin. ii) Press the Timer Control Down button 2 times. Done. Power Charger Carefully plugs into the micro USB port at the bottom of the Remote Control. Plug into a power adapter or the USB port in a computer for power charging. The port is delicate. Please be careful when plug in or unplug the cable. User has to manually update Daylight Saving Time for this device. Questions? Please support@electricurtain.com 6
Inserting the batteries. Basic settings of the remote control
Inserting the batteries Procedure prior to first use or when changing batteries Remove the back plate to expose the battery tray. Insert 2 x AA 1.5V alkaline batteries. Ensure the polarity of the batteries
More informationAutomate Pulse Set-Up Instructions
Automate Pulse Set-Up Instructions ABOUT THE AUTOMATE SHADES SKILL The Automate Pulse app allows for control of your motorized window treatments through your smartphone/tablet THE APP ALLOWS FOR: Individual
More informationDigital Timer. 1 About your Slimline Digital Timer. 2 Mechanism Dimensions. Cat No. D817SLIMDP Instruction Manual
Digital Timer Cat No. D817SLIMDP Instruction Manual 1 About your Slimline Digital Timer This 7 day digital timer can be set with up to 16 programs. Each of these can be set to repeat daily, weekly, daily
More informationInstallation and Operation Manual. YMP Series Signal Programmer
Installation and Operation Manual YMP Series Signal Programmer February 2006 YMP Series Clock/Signal Programmer Installation and Operation Manual YMP Series Clock/Signal Programmers YMP YMP02 YMP04 YMP06
More informationOperations of ewelink APP
Operations of ewelink APP Add WiFi-RF Bridge to APP: 1. In a place where there is a wireless WIFI signal, turn on the WLAN function of the phone, select a wireless network and connect it. 2. After powering
More informationU8 Timer. Owner s Manual MODEL NO. 2000U8. Model and serial number may be found at the rear of the feeder base.
Owner s Manual U8 Timer MODEL NO. 2000U8 Model and serial number may be found at the rear of the feeder base. Please record both model and serial number in a safe place for future use. Where Purchased
More informationFOREST SHUTTLE S / L / M RECEIVER
2 FOREST SHUTTLE S / L / M RECEIVER QUICK INSTALLATION OF ASSEMBLED TRACKS : Programming Shuttle S / L / M Receiver to a channel One pre-assembled motorized curtain track systems is standard programmed
More informationhttp://waterheatertimer.org/woods-timers-and-manuals-old.html#hpm 1 About your Slimline Digital Timer This 7 day digital timer can be set with up to 16 programs. Each of these can be set to repeat daily,
More informationEC7000, EC7004 and EC7005 Single Channel Electronic Time Controls
http://waterheatertimer.org/paragon-timers-and-manuals.html#ec Replacement timer http://waterheatertimer.org/intermatic-et-series-timers-and-manuals.html#et1700 EC7000, EC7004 and EC7005 Single Channel
More informationInstruction Manual Reizen Atomic Radio-Controlled USB-Charge Analog Talking Watch (USA-Euro Multi-Band) #704066
1 Instruction Manual Reizen Atomic Radio-Controlled USB-Charge Analog Talking Watch (USA-Euro Multi-Band) #704066 Your Atomic USB-Charge Analog Talking Watch is a multi-band, radio-controlled watch. It
More informationSafety warning Important Safety Instructions. Wall Mount Specifications. Electronic Program Guide. Lock Menu 18. PVR File System
LT-32N370Z 32 INPUT Safety warning Important Safety Instructions Wall Mount Specifications Electronic Program Guide Lock Menu 18 PVR File System 11 11 11 14 15 16 17 19 20 21 21 22 23 24 25 INPUT AAA
More informationSCS318. User Instructions. SCS318 comprising of SCS317 7 Day Wireless Programmable Room Thermostat and SSR303 Receiver
SCS318 User Instructions SCS318 comprising of SCS317 7 Day Wireless Programmable Room Thermostat and SSR303 Receiver Programmable room thermostats are widely recognised as one of the best ways in which
More informationStandard Digital Terminal High-Definition Digital Terminal. User Guide
Standard Digital Terminal High-Definition Digital Terminal User Guide ILL-GDA-STD-001-0709 IN THIS GUIDE IMPORTANT RULES FOR SAFE OPERATION... 4 AVAILABLE ILLICO TERMINALS... 5 REMOTE CONTROLS... 17 CONNECTIONS...
More informationDMX48. User s instruction manual. 24 Channel DMX controller
WWW.LIGHTEMOTIONS.COM.AU DMX48 24 Channel DMX controller User s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction
More informationInstruction Manual for Electronic Blowers and Flashboards
Instruction Manual for Electronic Blowers and Flashboards These instructions cover both the table model 17212 table top Electronic Bingo Blower (Fig 1) and the 17213 floor model Electronic Bingo Blower
More informationSPIRIT. SPIRIT Attendant. Communications System. User s Guide. Lucent Technologies Bell Labs Innovations
Lucent Technologies Bell Labs Innovations SPIRIT Communications System SPIRIT Attendant User s Guide Lucent Technologies formerly the communications systems and technology units of AT&T 518-453-710 106449697
More informationController, Scheduler-Timer Model UCS-01 version User Guide
Model UCS-01 version 1.48+ User Guide QUICK REFERENCE GUIDE Time Date IDLE SCREEN 03:50PM [RUN] 05/09/06 Tue Day of the Week Schedule Mode (change via 'Set Time') [OFF] = No Events Operate [RUN] = Run
More informationUSER MANUAL AL-Control 1 PRO
USER MANUAL AL-Control 1 PRO It is important to read this instruction book prior to installing or using your new product for the first time. Contents General Introduction...1 Descriptions Features Physical
More informationSlimline Digital Electric Radiator. Step by Step Programming Guide
Slimline Digital Electric Radiator Step by Step Programming Guide Setting the Clock Press the right button to move the square cursor across to the CLOCK icon. Press OK and the hour number will be flashing.
More informationUSER MANUAL FOR CABLE RECEIVER KAON KCF-200CO KAON KCF-H220SCO
USER MANUAL FOR CABLE RECEIVER KAON KCF-200CO KAON KCF-H220SCO SECURITY INSTRUCTIONS FOR USING THE RECEIVER Always fallow these instructions to avoid risk of injury or damaging the equipment. Before cleaning
More informationDCL Time Controller WTDCL. Universal Lighting Technologies is a subsidiary of Panasonic Electric Works Co., Ltd., a member of the Panasonic Group
DCL Time Controller WTDCL Universal Lighting Technologies is a subsidiary of Panasonic Electric Works Co., Ltd., a member of the Panasonic Group Table of Contents 1. Introduction 2. Operation 2.1. On/Off
More informationInstalling the FOREST SHUTTLE S / L
2 Installing the FOREST SHUTTLE S / L 1 Assemble the track 2 Install the brackets and fix the track onto the brackets 3 Do not attach the drapery yet. Attach the drapery only after the end positions have
More informationSingle cable multiswich programmer PC102W
Single cable multiswich programmer PC102W 1. Product description The PC102W - single cable multiswich programmer (in the text - programmer) is useful instrument while configuring and troubleshooting SAT
More informationUser s Guide for the Digital Video Recorder
User s Guide for the Digital Video Recorder with Picture-in-Picture Control Explorer 8000 Home Entertainment Server Record and store from 30 to 50 hours of programs Record your favorite programs when you
More informationReceiver Customization
9241_13_Ch11_eng 10/30/08 3:16 PM Page 1 Receiver Customization PERSONALIZING YOUR SATELLITE RECEIVER Take a look through this chapter and you ll find out how to change settings on the receiver to make
More informationDIGITAL TIME SWITCH 7 DAY WITH INPUT DGU100A DGUM100A DGLC100A DGLC200A
INSTRUCTION MANUAL LISTED DIGITAL TIME SWITCH 7 DAY WITH INPUT DGU100A DGUM100A DGLC100A DGLC200A FOR TECHNICAL SUPPORT: 888.500.4598 A DIVISION OF NSi INDUSTRIES, LLC USA 800.321.5847 www.nsiindustries.com
More informationSimple and highly effective technology to communicate your brand s distinctive character
. . . Advantages 4 Simple and highly effective technology to communicate your brand s distinctive character COST EFFECTIVE No need to print graphics, you can change your message every day! No media player
More informationMaster Time Clock MTC-200 MTC-400 MTC-600. Users Manual
Master Time Clock MTC-200 MTC-400 MTC-600 Users Manual MidWest Time Control, Incorporated P.O. Box 1108 Owasso, Oklahoma 74055 Phone (918)272-9430 FAX (918)272-9441 www.midwest-time.com EMAIL: sales@midwest-time.com
More informationTDDFM14 OWNER S MANUAL
TDDFM14 OWNER S MANUAL Table of Contents 3 Installation Features System Selector Switches 6 10 Connecting Wires and Mounting Thermostat 10 Operation (Programming) Programming/Setting Clock Personal Program
More informationDTA INSTALLATION PROCESS & USER GUIDE FOR SPECTRUM BUSINESS CUSTOMERS
DTA INSTALLATION PROCESS & USER GUIDE FOR SPECTRUM BUSINESS CUSTOMERS This guide is intended for owners or managers and front desk personnel. This guide is not intended for guests. Customer Care 1-800-314-7195
More informationSingle Station Waterproof Timer
Single Station Waterproof Timer Installation and Programming Guide Features Up to four irrigation cycles per day Easy installation and programming Battery powered Waterproof and weather resistant 1234
More informationDigital Adapter Activation Guide
Digital Adapter Activation Guide Take your TV to the next level of digital technology. For other questions, please contact the GVTC Service Center at -800-67-88-800-67-88 gvtc.com To get started, review
More informationComfortChoice Touch Thermostat. Designed for ZigBee R Wireless Technology USER GUIDE
ComfortChoice Touch Thermostat Designed for ZigBee R Wireless Technology USER GUIDE TABLE OF CONTENTS PAGE WELCOME... 8,9 THE TOUCH SCREEN... 10,11 Home - Inactive... 10 Home - Active... 11 PHYSICAL BUTTONS...
More informationMaster Time Clock MTC Users Manual
Master Time Clock MTC-6000 Users Manual Midwest Time Control Phone (972)987-4408 Toll Free (888)713-0373 FAX (877)720-9291 www.midwest-time.com sales@midwest-time.com TABLE OF CONTENTS TOPIC PAGE GENERAL
More informationAppendix Lightolier Compose System
Appendix Lightolier Compose System The Lightolier Compose system has been designated a legacy feature and support is normally unavailable. Open the HCA Properties dialog and choose the legacy tab to enable
More informationPart No. ENC-LAB01 Users Manual Introduction EncoderLAB
PCA Incremental Encoder Laboratory For Testing and Simulating Incremental Encoder signals Part No. ENC-LAB01 Users Manual The Encoder Laboratory combines into the one housing and updates two separate encoder
More informationVERSION 2.A 10/21/1999. Lightronics Inc. 509 Central Drive, Virginia Beach, VA TEL
7/ 0(025< /,*+7,1*&21752/ &2162/( 2:1(56Ã0$18$/ VERSION 2.A 10/21/1999 Contents DESCRIPTION OF CONTROLS 3 OPERATION 4 USING THE MENU SYSTEM 5 MENU FUNCTIONS 5 RECORDING SCENES 7 USING SCENES 8 RECORDING
More informationNMS ETA TM Stereo Advanced Digital TV Set-top Box
Digital TV HD Set-top Box STB2-T2 NMS ETA TM Stereo Advanced Digital TV Set-top Box User Guide CONTENTS Safety Information... 3 Introduction... 4 Set-top Box Front Panel... 4 Set-top Box Back Panel...
More informationSport-TIMER 3000 TM Instruction Manual
Sport-TIMER 3000 TM Instruction Manual Sport-TIMER 3000 TM Index of Uses Page Sport-TIMER 3000 TM RECORD OF PURCHASE The Sport-TIMER 3000 TM is fully warranted to the original purchaser against any defects
More informationElectronic 1-Circuit 7-Day Time Switch With 100-Hour Backup
MODELS ET2705C, ET2705CR, ET2705CP Installation and Setup Instructions Electronic 1-Circuit 7-Day Time Switch With 100-Hour Backup WARNING Risk of Fire or Electric Shock Disconnect power at the circuit
More information2002 Martin Professional A/S, Denmark.
Freekie user manual 2002 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing from Martin Professional
More informationSpectacle Motion Board Hookup Guide
Page 1 of 16 Spectacle Motion Board Hookup Guide Spectacle Motion Board The Spectacle Motion Board makes it easy to add movement to your Spectacle projects. It can control up to 5 servo motors, either
More informationUniversal Home Remote System Operation (With Three Round LED)
Page 1 of 6 Universal Home Remote System Operation (With Three Round LED) The vehicle may have the Universal Home Remote System. If there are three round Light Emitting Diode (LED) indicator lights above
More information27'' Full HD LED Monitor KALED27MONSC Quick Start Guide
Safety Warnings 27'' Full HD LED Monitor KALED27MONSC Quick Start Guide TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVERS (OR BACKINGS). NO USER SERVICEABLE PARTS ARE INSIDE. REFER ALL SERVICING
More informationSoftwired Clock. Total Lighting Control. Catalog Number: RCLK8SWS DESCRIPTION FEATURES. Installation Instructions IMRCLK8SWS 1
Total Lighting Control Softwired Clock DESCRIPTION The Softwired Switching (SWS) System is a small network of relay panels and occupant control switches linked by a 4-wire dataline. Together these devices
More informationOverview: Specifications: Installation Instructions:
Overview: The SignalGuys.com Start/Stop Work Timer PT724A is an extremely versatile 24 Hour 365 Day Event Timers designed to support a wide range of applications. Such applications include: Start/Stop
More informationTable of Contents. Versa TILE & Versa DRIVE D2 Quick Start Manual
Versa TILE & Versa DRIVE D2 Table of Contents 1. Introduction 2 2. Versa TILE Assembly & Cabling 2 3. Computer & Versa DRIVE Connections 2 4. RasterMAPPER 3 5. Buffer Board 4 6. Testing the System 5 7.
More informationDVH-1019 MK2 User Manual PULL
DVH-1019 MK2 User Manual PULL Safety Rules WARNING Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term electrical device,as
More informationUser s Guide. Dimensions 4000 Series Control System. Topics at a Glance
User s Guide Dimensions 4000 Series Control System Topics at a Glance Installation...See Installation Guide Quick Start Configuration...11 User Interface...8 Initial Setup...19 Scheduling...63 Scene Recording...54
More informationInstallation & Programming Manual. Please read before using this timer.
Installation & Programming Manual Please read before using this timer. Warning! This unit operates using two fresh, high-quality AA alkaline batteries.batteries must be installed for unit to operate. USE
More informationInformation Radio Transmitter Programming Guide
Information Radio Transmitter Programming Guide Front Panel 1. LCD Display: Displays information related to the current mode. Shows transmit frequency, elapsed or remaining time, either during record or
More informationReceiver SETUP INSTRUCTIONS
Receiver SETUP INSTRUCTIONS If you are not seeing the screens listed in this guide, try changing your TV s input by pressing the Source/Input button on your TV. When you reach the activation stage of this
More informationOPERATION AND MAINTENANCE
BAS MS/TP Enabled OPERATION AND MAINTENANCE An Company Contents Powering Up For The First Time... 3 Setting MSTP Communication Parameters... 4 Changing the MSTP Address... 4 Changing the BACNET ID... 5
More informationFN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N
FN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N TABLE OF CONTENTS 1.0 INTRODUCTION 2.0 SPECIFICATIONS 3.0 INSTALLATION 4.0 GETTING STARTED 4.1 The Auto-Prompt Display 4.2 The Cursor, Entering Data 4.3
More informationSmart Hawk Firing System User s Manual
Firmware Version 3.09 Page 1 of 57 Table of Contents A reminder on the safe use of Electronic Pyrotechnic Firing Systems... 4 Description... 5 Common Features of the Smart Hawk Panel... 6 Features of the
More informationDigital Adapter Easy Setup Guide. Installation Operation Troubleshooting
Digital Adapter Easy Setup Guide Installation Operation Troubleshooting Table of Contents What s included in this Install Kit? 4 Connecting to a TVwith HDMI Cable 8 Connecting to a TV with Coax Cable 9
More informationLedSync820C LED Video Processor USER S MANUAL
LedSync820C LED Video Processor USER S MANUAL TABLE OF CONTENTS I. Safety precautions ----------------------------------------------------------------- 3 II. Connections of hardware 1.Rear view ------------------------------------------------------------
More information(Skip to step 11 if you are already familiar with connecting to the Tribot)
LEGO MINDSTORMS NXT Lab 5 Remember back in Lab 2 when the Tribot was commanded to drive in a specific pattern that had the shape of a bow tie? Specific commands were passed to the motors to command how
More informationRoom thermostat Instructions for Use. For the user. Instructions for Use. geotherm
Room thermostat Instructions for Use For the user Instructions for Use geotherm GB table of contents HOW TO USE YOUR APPLIANCE 1 Appliance use...2 1.1 Overall view... 2 1.2 Display... 2 1.3 Main screen...
More informationLX600 LCD TV Technical Information
LX600 LCD TV Technical Information TC-32LX600 Outline Features Overall Block Diagram A Board Main Layout Power On Sequence Protection Shutdown Troubleshooting Adjustments 1 Features Model TC-LX60 TC-LX600
More informationWaterline Room Controller - Type WLCT3
INSTRUCTIONS Introduction Room controller type WLCT3 is a 4-event programmable controller used to control areas with underfloor heating or special features of a WLM3 installation. The standard WLCT3 can
More informationSSPT724A Timer Quick Start Guide
SSPT724A Timer Quick Start Guide Open timer enclosure and remove mounting parts and instructions. When ready to program the timer, plug in timer to 120 Volt Ac power receptacle Press the SET button to
More informationDIGITAL VIDEO RECORDING (DVR) SERVICES
DIGITAL VIDEO RECORDING (DVR) SERVICES With a Digital Video Recorder (DVR) set-top box, you can easily record your favorite programs and then play them back anytime. The DVR and Picture-In-Picture (PIP)
More informationLS 6.0R SERVICE MANUAL
LS 6.0R SERVICE MANUAL 1 TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION CHAPTER 2: CONSOLE OVERLAY AND WORKOUT DESCRIPTION 2.1 Console Description 2.2 Display Windows Description 2.3 Getting Started
More informationVNS2210 Amplifier & Controller Installation Guide
VNS2210 Amplifier & Controller Installation Guide VNS2210 Amplifier & Controller Installation 1. Determine the installation location for the VNS2210 device. Consider the following when determining the
More informationReceiver Customization
6131_12_Ch10_eng 10/30/08 2:58 PM Page 1 Receiver Customization PERSONALIZING YOUR SATELLITE RECEIVER Take a look through this chapter and you ll find out how to change settings on the receiver to make
More informationSINCE User Manual 7 DAY PROGRAMMABLE DIGITAL TIMER MODEL PS-100. The best solutions for automation and protection.
SINCE 1973 User Manual 7 DAY PROGRAMMABLE DIGITAL TIMER MODEL PS-100 The best solutions for automation and protection www.nassarelectronics.com Description The PS-100 is a 7 day programmable digital timer
More informationDATA LOGGER MODEL L452 ENGLISH
DATA LOGGER MODEL L452 ENGLISH User Manual Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using standards and instruments traceable
More informationDigital Economy Seven Programmer
Digital Economy Seven Programmer Model: TRTD7N White Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference and maintenance.
More informationIntegrated Remote Commander
3-244-192-12 (1) Integrated Remote Commander Operating Instructions RM-VL1000 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical
More informationConference Speaker Timing System. Operating Instruction Manual
Conference Speaker Timing System Operating Instruction Manual December 2006 Table of Contents Overview... 2 The Master Station... 2 The Slave Station... 2 Warning Lights... 3 Radio-Controlled Clock...
More informationSINGLE ZONE CLIMATE ZONING SYSTEM. Technical Manual. Polyaire Pty Ltd
SINGLE ZONE CLIMATE ZONING SYSTEM Technical Manual Polyaire Pty Ltd 11-13 White Road GEPPS CROSS South Australia, 5094 Tel: (08) 8349 8466 Fax: (08) 8349 8446 www.polyaire.com.au CONTENTS Features 1 Application
More informationOperational & Programming. Instructions Manual 930L. Lightbar Series
Operational & Programming Instructions Manual 930L Lightbar Series ISO930L03 8.4.2005 Programming Warning Modes Using The 940DCP Digital Control Panel or The Lightbar Control Cable The 930L Lightbar flash
More informationK9123, K9134, K9135 Remote Programming Instructions and Specifications
K9123, K9134, K9135 Remote Programming Instructions and Specifications 12 Volt Signal Ground Signal Plug Door Push & Hold K9123 K9134 K9135 Before pairing the receiver to the remotes, the receiver must
More informationCAUTION RISK OF ELECTRIC SHOCK NO NOT OPEN
Evolution Digital HD Set-Top Box Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near
More information7 Day Digital Programmer 3 Channel Surface Mount
7 Day Digital Programmer 3 Channel Surface Mount Model: TRT038N Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference
More informationWatch and Learn Visit upunch.com/resources to view our helpful videos. Or scan this QR Code to get our step-by-step videos right on your phone.
HN1000/HN3000 Product Manual Watch and Learn Visit upunch.com/resources to view our helpful videos. Or scan this QR Code to get our step-by-step videos right on your phone. CONTENTS 01 INTRODUCTION 2 02
More informationTroubleshooting CS800/LC900 Bikes
Troubleshooting CS800/LC900 Bikes CS800/900LC Bike Troubleshooting Entering the Maintenance Mode 15 Touch Screen: The Maintenance Mode is designed to help the tech determine certain faults in the upper
More informationExperiment 8 Fall 2012
10/30/12 Experiment 8 Fall 2012 Experiment 8 Fall 2012 Count UP/DOWN Timer Using The SPI Subsystem and LCD Display NOTE: Late work will be severely penalized - (-7 points per day starting directly at the
More informationAdditional Instructions for the Arlec Energy Cost Meter PC222
Additional Instructions for the Arlec Energy Cost Meter PC222 I found the instructions that came with the Arlec Energy Cost Meter PC222 a bit confusing and difficult to read. So I wrote my own! I found
More informationALPHA Personal Priority Display User Manual
ALPHA Personal Priority Display User Manual PERSONAL PRIORITY DISPLAY 1997 Adaptive Micro Systems Form No. 9708-5002 12/10/97 i NOTE: Due to continuing product innovation, specifications in this document
More informationWELCOME! WHAT S IN THE BOX: WHAT S IN THE BOX:
QUICK START GUIDE WELCOME! Thank you for buying the Slingbox TM SOLO. Follow these instructions to connect your new Slingbox and start watching your TV anywhere on your laptop or mobile*. For more information
More informationUSER GUIDE /4-16/9047
USER GUIDE 171951/4-16/9047 May 2016 CONTENTS Equipment 4 Connected-Home DVR/Standard Set-Top Box Wireless Set-Top Box Wireless Access Point Remote Controls Residential Gateway Getting Started 12 Turn
More informationElectronic 2-Circuit 24-Hour Time Switch With 100-Hour Backup
MODELS ET2125C, ET2125CR, ET2125CP Installation and Setup Instructions Electronic 2-Circuit 24-Hour Time Switch With 100-Hour Backup WARNING Risk of Fire or Electric Shock Disconnect power at the circuit
More informationLCS-2. Low Voltage Lighting Control Relay Processing Panel. Operator s Manual
Low Voltage Lighting Control Operator s Manual The Lighting Control Company 82 Sandiford Drive, Unit #17, Stouffville, Ontario L4A 3S3 Toll Free 1-888-546-2599 Tel: 905 642-3335 Fax: 905 642-3360 Table
More informationINSTALLATION AND OPERATION INSTRUCTIONS EVOLUTION VIDEO DISTRIBUTION SYSTEM
INSTALLATION AND OPERATION INSTRUCTIONS EVOLUTION VIDEO DISTRIBUTION SYSTEM ATTENTION: READ THE ENTIRE INSTRUCTION SHEET BEFORE STARTING THE INSTALLATION PROCESS. WARNING! Do not begin to install your
More informationCHAPTER 6 - SETTINGS & HELP
CHAPTER 6 - SETTINGS & HELP Settings... 84 Info & Test...84 Display...84 Audio...88 Network Setup...88 Remote Control...89 Satellite...90 Whole-Home...91 Power Saving...91 Reset...92 Parental Controls...
More information1. Get support Attention Safety Caution Applications View Cameras on Screen (ex. HD TV or PC monitor) 3. Change Time Zone 5
1. Get support 1 2. Attention 1 3. Safety Caution 1 4. Applications 1 5. View Cameras on Screen (ex. HD TV or PC monitor) 3 Change Time Zone 5 6. Installation Guide for ONWOTE Cameras 6 7. View Cameras
More informationTFT LCD MONITOR USER MANUAL. L80AP and L101AP
TFT LCD MONITOR USER MANUAL L80AP - 8.0 and L101AP - 10.1 Table Of Contents Table of contents/ Warning.... 2 Precautions...3 About this user manual and products / Items included in the delivery..... 4
More informationUsing the More Advanced Features of the AUTOcard-SA System
Using the More Advanced Features of the AUTOcard-SA System IMPORTANT NOTICE This manual describes the AUTOcard-SA system s more advanced features. If you wish to only program the system s basic features
More informationSR - 516D DESK TOP DMX REMOTE STATION. Version: Date: 05/16/2013
SR - 516D DESK TOP DMX REMOTE STATION Version: 1.10 Date: 05/16/2013 Page 2 of 10 TABLE OF CONTENTS DESCRIPTION 3 POWER REQUIREMENTS 3 INSTALLATION 3 CONNECTIONS 3 POWER CONNECTIONS 3 DMX CONNECTIONS 3
More informationDTS400B - DZS400BP 3/9/07 10:14 AM Page 1
DTS400B - DZS400BP 3/9/07 10:14 AM Page 1 18 DTS400B - DZS400BP 3/9/07 10:14 AM Page 3 TABLE OF CONTENTS Section Page Capabilities and Features.......... 1 Installation Instructions............ 2 Instructions
More informationTimer Modules. MEU11 24 Hour Module, MEU17 7 Day Module (Without Housing)
Timer Modules MEU11 24 Hour Module, MEU17 7 Day Module (Without Housing) EMU11 24 Hour Module, EMU17 7 Day Module (With Housing Giving panel mounting facility) Installation & Operating Instructions 1 1.
More informationModel VS-2A 2-Port VGA Switch with Audio & Serial Control
Model VS-2A 2-Port VGA Switch with Audio & Serial Control UMA1119 Rev B Copyright Hall Research, Inc. All rights reserved. 1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax -6698 Model VS-2A 2 2-Port
More informationSevenlogic Comfort Timer Switch
Operating manual Sevenlogic Comfort Timer Switch RoHS compliant 2011/65/EU General safety instructions...1 Technical data & included with delivery...2 Electrical connection...2 Assembly...3 Setting inching
More informationUser Guide. Anywhere Virtual, Scheduler-Timer. Model UCS-V0
SCHEDULE NOTES Hint: complete the notes before programming the events. Event # Example 01) 02) 03) 04) 05) 06) 07) 08) 09) 10) Channel #; Description (days of the week - SMTWTFS) Chnl 001; Front porch
More informationMY-HITE ADJUSTABLE TABLE
MY-HITE ADJUSTABLE TABLE Corner T Leg Base Model Number : FCNAHBT Please Read Instructions Before Use ASSEMBLY INSTRUCTIONS ALL WORKSTYLES WELCOME Thank you for choosing Friant. We appreciate the trust
More informationMotor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at
* Motor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at www.keystonefabrics.com Step 1: Identify the parts of your shade (parts shown
More informationRA-RS232, RB-RS232. Setup and Installation Guide Addendum For RadioRA RS232 Interface
RA-RS232, RB-RS232 Setup and Installation Guide Addendum For RadioRA RS232 Interface A Comprehensive Step-by-Step Guide for Programming and Operating the Lutron RadioRA RS232 Interface Note: Please leave
More informationTORK DGU100/DGUM100 7 DAY DIGITAL TIME SWITCH INSTALLATION AND OPERATING INSTRUCTIONS READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT
TORK DGU100/DGUM100 7 DAY DIGITAL TIME SWITCH INSTALLATION AND OPERATING INSTRUCTIONS READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT INSTALLATION UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN 1. To
More information