ADP-DI Dual Input Module

Transcription

1 ADP-DI Dual Input Module Supplement to be read in conjunction with the ADP5 User Manual User Manual

2 ADP-DI User Manual Introduction... Variants to Chapter 3 of the ADP5 User Manual... Variants to Chapter of the ADP5 User Manual...3 Section Linear Inputs Connections... 3 Variants to Chapter 5 of the ADP5 User Manual...3 Variants to Chapter 6 of the ADP5 User manual...3 Variants to Chapter 7 of the ADP5 user Manual... RESPONSE TO COMMAND... ASCII FORMAT... 5 Printer... 6 ADP5/DI - Dual Input Specifications... 6 W A R R A N T Y... 6 This supplement should be read in conjunction with the ADP5 user manual. References will be made to the appropriate chapters throughout. Introduction The ADP5/DI, provides two non-isolated inputs either to 0mA or 0 to 0 volts (This should be specified at time of order). as: DIA = /0mA DIV = 0/0 volts These inputs have independent scaling factors and for input 'A' and and for input 'B'. The display can be selected from the list of 'A' and 'B' functions as follows, and can be selected under the mnemonic 'Ab' 0 = = = 3 = = A + B A - B A x B A/B A = process input, B = Setpoint () Scale factors can be applied to this function using a scale factor '', a division factor '' and a display offset ''. The analogue output, relays and printer take their value from the function selected at 'Ab'. Mantracourt Electronics Limited ADP-DI User Manual Issue.

3 Variants to Chapter 3 of the ADP5 User Manual Mnemonic InPA InPb Pb Ont or It OFFt or dt da or ct IPLb IPHb Ab dp-r dpa d Cp SdSt/Lab Ln rs dis Descriptions Live display of input 'A' Live display of input 'b' As ADP5, except when Ab =, when = value set by input 'b' As ADP5 except add 00mS to all display update time Input low scale factor for 'A' input (no IPOF) Input high scale factor for 'A' input (no IP) Input low scale factor for 'B' input Input high scale factor for 'B' input Scale factor, unity being.0000 except when = 3, then unity = Division factor, divides result of function x scale factor, by the value set Offset provides a display offset As ADP5 Sets function of A, and B inputs (0 - ). See table below As ADP5 (no reset of totaliser count) Sets decimal point position for the 'A' input display. (For display purposes only) Sets decimal point position for 'B' input display (for display purposes only) AS ADP5 Returns to A,B, function display Ab 0 3 Function A + B A - B A x B A/B Display = Input A, = Input B Display = ( Result of A,B Function ) x Mantracourt Electronics Limited ADP-DI User Manual Issue.

4 Variants to Chapter of the ADP5 User Manual Section Linear Inputs- Two non isolated input types are available Input Source DC Current DC Voltage Range min +.000mA 0V max mA 0V Resolution 00uA 50µV Code DIA DIV The method of calculating,, and is similar to that described in the ADP5 user manual. Connections Details are shown below: Input B +V Input A Input A OV Input B Unregulated 50mA -ve +ve Guard -ve Note: Section, 3 and are not appropriate to the ADP5/DI, as no Temperature, Rate Totaliser or Quadrature Inputs are available. Variants to Chapter 5 of the ADP5 User Manual Relays take their value from the function set in 'Ab', unless Ab =, then display = input 'A' and set point = input 'B' Variants to Chapter 6 of the ADP5 User manual A pulse output module (F) is not available with ADP5/DI Mantracourt Electronics Limited ADP-DI User Manual Issue. 3

5 Variants to Chapter 7 of the ADP5 user Manual The protocols for ASCII and Fast Format remain unchanged. The commands have been restructured as follows MANTRUS FORMAT Command No HEX Description A B C D E F A B C D E F 0 Full data dump Display only INPA Read only IN Read only IT (ONT) DT (OFFT) CT (DA) DP r DP A DP b CP Read only SDST/L Read only EROM ENLE/DISLE RELAY RESET PEAK HD RESET RESPONSE TO COMMAND BYTE,3,5 6,7 8,9 0,,3,5 6,7 8,9 0,,3,5 6,7 8,9 DESCRIPTION SDST, Display only INPA IN IT (ONT) DT (OFFT) CT (DA) Mantracourt Electronics Limited ADP-DI User Manual Issue.

6 30,3 3,33 3,35 36,37 38,39 0,,3, ,9 50,5 5,53 5,55 56,57 58, PID OUTPUT LEVEL DP r DP A DP b CP Read only SDST/L Read only EROM ENLE/DISLE RELAY STATUS CHECKSUM ASCII FORMAT LEL DISP INPA IN IT DT CT DP DPAI DP bi CP SDST DROM ERRD ERWR PID RES PKR FUNCTION Display only INPA Read only IN IT (ONT) DT (OFFT) CT (DA) DP r DP A DP b CP Read only SDST/L Read only EROM DISLE EROM ENLE & READ FROM EROM EROM ENLE & WRITE TO EROM REQUEST PID POWER LEVEL RELAY RESET PEAK HD RESET Mantracourt Electronics Limited ADP-DI User Manual Issue. 5

7 Printer The printer takes its value from the function set in 'Ab' ADP5/DI - Dual Input Specifications to 0mA - input Minimum Maximum Resolution Input Impedance Offset Temperature drift /ºC Drift in month /ºC Subsequent drift per month /ºC Gain temperature drift %/ºC Linearity % 0 to 0 volt - Input Minimum Maximum Resolution Input impedance Offset temperature drift /ºC Drift in month /ºC Subsequent drift per month /ºC Gain temperature drift %/ºC Linearity +.000mA mA 00µA 6R5 6µA 3µA.6µA V 0.000V 50µV M ohm 0µV 0µV µv W A R R A N T Y All ADP products from Mantracourt Electronics Ltd., ('Mantracourt') are warranted against defective material and workmanship for a period of (3) three years from the date of dispatch. If the 'Mantracourt' product you purchase appears to have a defect in material or workmanship or fails during normal use within the period, please contact your Distributor, who will assist you in resolving the problem. If it is necessary to return the product to 'Mantracourt' please include a note stating name, company, address, phone number and a detailed description of the problem. Also, please indicate if it is a warranty repair. The sender is responsible for shipping charges, freight insurance and proper packaging to prevent breakage in transit. 'Mantracourt' warranty does not apply to defects resulting from action of the buyer such as mishandling, improper interfacing, operation outside of design limits, improper repair or unauthorised modification. No other warranties are expressed or implied. 'Mantracourt' specifically disclaims any implied warranties of merchantability or fitness for a specific purpose. The remedies outlined above are the buyer s only remedies. 'Mantracourt' will not be liable for direct, indirect, special, incidental or consequential damages whether based on the contract, tort or other legal theory. Any corrective maintenance required after the warranty period should be performed by 'Mantracourt' approved personnel only. ISO 900 REGISTERED FIRM CIn the interests of continued product development, Mantracourt Electronics Limited reserves the right to alter product specifications without prior notice. DOC REF ME06ML D Code No Issue Mantracourt Electronics Limited ADP-DI User Manual Issue.