RV6**D Digital Series LV6**D Digital Series

Transcription

1 RV6**D Digitl Series LV6**D Digitl Series

2 Contents INSTALLING YOUR TV Differene List etween LV nd RV Series...4 Sfety Preutions...5 Instlltion nd importnt informtion...6 The remote ontrol...7 CT (for RV series)...7 CT (for LV series)...8 Inserting tteries nd effetive rnge of the remote...8 CONNECTING YOUR TV Conneting externl equipment...9 Conneting n HDMI or DVI devie to the HDMI input...10 To onnet n HDMI devie...10 To onnet DVI devie...10 Conneting omputer...11 To onnet PC to the RGB/PC terminl...11 To onnet PC to the HDMI terminl...11 Controls nd input onnetions...12 Swithing on...12 Using the remote ontrol...12 Using the ontrols nd onnetions...12 SETTING UP YOUR TV Strtup Applition...13 Quik Setup...13 Ant/Cle In (if ville)...14 Auto Tuning...15 ATV Mnul Tuning...15 Tuning...15 Skip...17 Sorting positions...17 DTV Mnul Tuning...18 Mnul Tuning...18 Mnul Tuning for DVB-C...18 DTV Settings...18 Chnnels...18 Auto Chnnel Updte...19 DVB Chrter Set...19 Dynmi Sn...19 Lotion setting...19 Anlogue swith-off...19 CONTROLS AND FEATURES Generl ontrols...20 Seleting positions...20 The Time Disply nlogue only...20 Stereo nd Bilingul trnsmissions...20 Quik Menu...20 Sound ontrols...21 Volume ontrols nd mute sound...21 Dul...21 Bss, Trele nd Blne...21 Advned Sound Settings...21 Stle Sound (LV series only)...21 Doly Volume (RV series only)...21 Dynmi Rnge Control...21 Audio Level Offset...22 Hedphone Settings...22 Audio desription...22 Widesreen viewing...23 Piture ontrols...25 Piture Position...25 Piture Mode...25 Piture preferenes...25 Reset D Colour Mngement...26 Bse Colour Adjustment...26 Colour Temperture...26 Auto Brightness Sensor Settings...27 Ative Bklight Control...27 Blk/White Level...27 Stti Gmm...27 MPEG NR Noise Redution...27 DNR Digitl Noise Redution...27 Resolution Cinem Mode...28 Expert Mode...28 Resetting the dvned piture settings...28 Control Visuliztion...29 Automti Formt (Widesreen) :3 Streth...29 Blue Sreen...29 Side pnel djustment...29 Piture still...29 HDMI Informtion Disply...29 Enjoying Photos through the USB port...30 To selet the Auto Strt funtion...30 To open Photo Viewer...30 Viewing photo files...31 Other fetures...32 Pnel Lok...32 TOSHIBA Illumintion (RV series only)

3 The timers...32 Progrmme Timers digitl only...32 On Timer...33 Sleep Timer...33 Digitl on-sreen informtion nd Progrmme Guide...34 Informtion...34 Guide...35 Genre seletion/serhing...35 PROBLEM SOLVING Questions nd Answers...45 INFORMATION Liense Informtion...48 Informtion...50 Speifitions nd essories...52 Digitl settings prentl ontrol...36 Setting the PIN...36 Prentl Setup...36 Digitl settings Chnnel Options...37 Skipping hnnels...37 Loking hnnels...37 Digitl settings other settings...37 Sutitles...37 Audio lnguges...37 Common Interfe...38 Softwre Upgrde nd Lienses...38 Auto Upgrde...38 Serhing for New Softwre...38 Softwre Lienses...38 System Informtion nd Reset TV...39 System Informtion...39 Automti Power Down...39 Reset TV...39 PC Settings...39 Horizontl nd Vertil Position...39 Clok Phse...39 Smpling Clok...40 Reset...40 Input seletion nd AV onnetions...40 Input seletion...40 Externl input skip...40 Input signl seletion...41 PC Audio...41 HDMI 1 Audio...41 HDMI Settings...41 Digitl Audio Output...42 TEXT SERVICES Text servies...43 Seleting modes...43 Text informtion...43 Nvigting pges using Auto...43 Nvigting pges using LIST...43 Control uttons...44 DTV Intertive Servies

4 INSTALLING YOUR TV Differene List etween LV nd RV Series Plese onfirm your TV's speifitions in the following tle. NOTE: The model numer is on the k of your TV. Item RV685D/RV675D LV685D/LV675D RV665D LV665D Reeiving signl DVB-T DVB-C H.264 Sound HE-AAC Doly Digitl Doly Digitl Plus Doly Volume TOSHIBA LOGO Illumintion Remote ontrol CT CT CT CT NOTE: The illustrtions of the menu disply in this mnul show the LV685D s n exmple. 4

5 INSTALLING YOUR TV Sfety Preutions This equipment hs een designed nd mnuftured to meet interntionl sfety stndrds, ut like ny eletril equipment, re must e tken to otin the est results nd for sfety to e ssured. Plese red the points elow for your own sfety. They re of generl nture nd re intended to help with ll eletroni onsumer produts. Some points my not pply to the goods you hve just purhsed. Air Cirultion Leve more thn 10m lerne round the television to llow dequte ventiltion. This will prevent overheting nd possile dmge to the television. Dusty ples should lso e voided. Het Dmge Dmge my our if the television is left in diret sunlight or ner heter. Avoid ples sujet to extremely high tempertures or humidity. Ple in lotion where the temperture remins etween 5 C (41 F) min. nd 35 C (94 F) mx. Mins Supply The mins supply required for this equipment is v AC 50/60Hz. Never onnet to DC supply or ny other power soure. DO ensure tht the television is not stnding on the mins led. Use only the supplied led. DO NOT ut off the mins plug from this equipment. The plug inorportes speil Rdio Interferene Filter, the removl of whih will impir its performne. In the UK, the fuse fitted in the plug is pproved y ASTA or BSI to BS1362. It should only e repled y orretly rted nd pproved type nd the fuse over must e refitted. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN. Do DO red the operting instrutions efore you ttempt to use the equipment. DO ensure tht ll eletril onnetions (inluding the mins plug, extension leds nd inter-onnetions etween piees of equipment) re properly mde nd in ordne with the mnufturers instrutions. Swith off nd withdrw the mins plug efore mking or hnging onnetions. DO onsult your deler if you re ever in dout out the instlltion, opertion or sfety of your equipment. DO e reful with glss pnels or doors on equipment. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Do not DO NOT ostrut the ventiltion openings of the equipment with items suh s newsppers, tleloths, urtins, et. Overheting will use dmge nd shorten the life of the equipment. DO NOT llow eletril equipment to e exposed to dripping or splshing or ojets filled with liquids, suh s vses, to e pled on the equipment. DO NOT ple hot ojets or nked flme soures, suh s lighted ndles or nightlights, on or lose to equipment. High tempertures n melt plsti nd led to fires. DO NOT use mkeshift stnds nd NEVER fix legs with wood srews. To ensure omplete sfety, lwys fit the mnufturers pproved stnd, rket or legs with the fixings provided ording to the instrutions. DO NOT leve equipment swithed on when it is unttended, unless it is speifilly stted tht it is designed for unttended opertion or hs stndy mode. Swith off y withdrwing the plug, nd mke sure your fmily knows how to do this. Speil rrngements my need to e mde for people with disilities. DO NOT ontinue to operte the equipment if you re in ny dout out it working normlly, or it is dmged in ny wy swith off, withdrw the mins plug nd onsult your deler. WARNING exessive sound pressure from erphones or hedphones n use hering loss. ABOVE ALL NEVER let nyone, espeilly hildren, push or hit the sreen, push nything into holes, slots or ny other openings in the se. NEVER guess or tke hnes with eletril equipment of ny kind it is etter to e sfe thn sorry. 5

6 INSTALLING YOUR TV Instlltion nd importnt informtion Where to instll Lote the television wy from diret sunlight nd strong lights. Soft, indiret lighting is reommended for omfortle viewing. Use urtins or linds to prevent diret sunlight flling on the sreen. Ple the TV on stle, level surfe tht n support the weight of the TV. In order to mintin stility nd prevent it flling over, seure the TV to the level surfe using the strp loted under the tle top stnd, or to wll using sturdy tie to the lip on the k of the tle top stnd. The LCD disply pnels re mnuftured using n extremely high level of preision tehnology, however, sometimes some prts of the sreen my e missing piture elements or hve luminous spots. This is not sign of mlfuntion. Mke sure the television is loted in position where it nnot e pushed or hit y ojets, s pressure will rek or Side View Fixing strp Fixing strp Top View Stnd lip P Clip Sturdy tie (s short s possile) dmge the sreen. Also plese e ertin tht smll items nnot e inserted into slots or openings in the se. Clening the sreen nd inet Turn off the power, nd len the sreen nd inet with soft, dry loth. We reommend tht you do not use ny proprietry polishes or solvents on the sreen or inet s this my use dmge. Plese tke note The digitl reeption funtion of this television is only effetive in the ountries listed in the Country setion of the SETUP menu. Depending on ountry/re, some of this television's funtions my not e ville. Reeption of future dditionl or modified servies n not e gurnteed with this television. If sttionry imges generted y 4:3 rodsts, text servies, hnnel identifition logos, omputer displys, video gmes, on sreen menus, et. re left on the television sreen for ny length of time, they ould eome onspiuous. It is lwys dvisle to redue oth the rightness nd ontrst settings. Very long, ontinuous use of the 4:3 piture on 16:9 sreen my result in some retention of the imge t the 4:3 outlines. This is not defet of the LCD TV nd is not overed under the mnufturer s wrrnty. Regulr use of other size modes (eg: Super Live) nd vrying the side pnel rightness (if ville on the model) will prevent permnent retention. EXCLUSION CLAUSE Toshi shll under no irumstnes e lile for loss nd/or dmge to the produt used y: i) fire; ii) erthquke; iii) identl dmge; iv) intentionl misuse of the produt; v) use of the produt in improper onditions; vi) loss nd/or dmge used to the produt whilst in the possession of third prty; vii) ny dmge or loss used s result of the owner s filure nd/or neglet to follow the instrutions set out in the owner s mnul; viii) ny loss or dmge used diretly s result of misuse or mlfuntion of the produt when used simultneously with ssoited equipment; Furthermore, under no irumstnes shll Toshi e lile for ny onsequentil loss nd/or dmge inluding ut not limited to the following, loss of profit, interruption of usiness, the loss of reorded dt whether used during norml opertion or misuse of the produt. NOTE: A Toshi wll rket or stnd, where ville, must e used to mintin the produt s BEAB pprovl. 6

7 INSTALLING YOUR TV The remote ontrol Simple t--glne referene for your remote ontrol CT (for RV series) 1 For On/Stndy mode (T/D)* 2 To selet devie mode (T/D)** 3 Numer uttons (T/D) 4 Swith the Audio Desription On/Off (T) 5 To selet externl input soures (T) To selet line input (D) 6 To lter the TV volume (T/D) 7 To mute the TV sound (T/D) To ess Quik Menu (T) 9 To hnge progrmme positions (T) To hnge text pges (T) 10 To disply the digitl on-sreen Progrmme Guide (T) 11 To exit menus (T) 12 When using menus, the rrows move the ursor on the sreen up, down, left or right. Press Q to onfirm your seletion (T/D) 13 To disply on-sreen informtion (T/D) To ess index pge in Text mode (T) 14 To return to previous menu (T/D) 15 Colour uttons Text nd intertive servie ontrol uttons (T) TOP To ess Top Menu (D) DVD DVD Menus (D) NOTE: ROOT nd CONTENTS re not used for this model. 16 s Stereo/ilingul trnsmissions (T) AUDIO To Aess Audio menu (D) 17 SUBTITLE Digitl Sutitles or Anlogue TEXT Sutitle pges if ville (T) SET UP To ess Setup menu (D) 18 Widesreen viewing (T/D) 19 To ll up text servies (T) 20 When in TV mode: MENU On-sreen menus ATV/DTV To swith etween ATV (nlogue television) nd DTV (digitl television) LIST To swith etween TV nd Rdio progrmmes when in digitl mode r Piture still D Anlogue time disply When in Text mode: A To revel oneled text B To hold wnted pge C To enlrge text disply size D To selet pge whilst viewing norml piture When using the Progrmme Guide: Z - 24 hours z + 24 hours CC - 1 pge + 1 pge DVD mode: press V to EJECT press v to STOP press to PLAY press W/w to PAUSE/STEP press Z to SKIP-BACK press CC to REWIND press to FAST FORWARD press z to SKIP-FORWARD * T=TV mode, D=DVD mode ** REGZA-LINK mode is not ville for this TV. 7

8 INSTALLING YOUR TV CT (for LV series) In TV mode: To hnge progrmme positions In Text mode: To hnge text pges 13 In TV mode: To disply on-sreen informtion In Text mode: To ess index pge in Text mode 14 To ess Quik Menu 15 To disply the digitl on-sreen Progrmme Guide 16 To exit menus 17 When using menus, the rrows move the ursor on the sreen up, down, left or right. Press Q to onfirm your seletion 18 To disply the on-sreen menu 19 To return to the previous menu 20 Text ontrol uttons 21 When in Text mode: A To revel oneled text B To hold wnted pge C D To enlrge text disply size To selet pge whilst viewing norml piture When in TV mode: D Anlogue time disply Inserting tteries nd effetive rnge of the remote 1 For On/Stndy mode 2 To selet externl input soures 3 Piture still 4 To ll up text servies 5 Stereo/ilingul trnsmissions 6 Digitl Sutitles or Anlogue TEXT Sutitle pges if ville 7 Numer uttons 8 Swith the Audio Desription On/Off 9 To swith etween ATV (nlogue television) nd DTV (DTV TV/DTV RADIO/DTV TEXT if ville) 10 To lter the TV volume 11 To mute the TV sound CT CT Remove the k over to revel the ttery omprtment nd mke sure the tteries re inserted the proper wy. Suitle ttery types for this remote re AAA, IEC R03 1.5V. Do not omine used, old ttery with new one or mix ttery types. Remove ded tteries immeditely to prevent id from leking into the ttery omprtment. Dispose of them in ordne with instrutions on pge 48 of this mnul. Wrning: tteries must not e exposed to exessive het suh s sunshine, fire or the like. The performne of the remote ontrol will deteriorte eyond distne of five metres or outside n ngle of 30 degrees from the entre of the television. If the operting rnge eomes redued, the tteries my need repling. 8

9 CONNECTING YOUR TV Conneting externl equipment Before onneting ny externl equipment, turn off ll min power swithes. If there is no swith, remove the mins plug from the wll soket. OPTICAL DIGITAL AUDIO OUTPUT RGB/PC INPUT Illustrtion represents 40LV685D. HDMI INPUT SOCKETS COMPONENT VIDEO INPUT (EXT 3) SCART 2 (EXT 2) SCART 1 (EXT 1) * deoder ould e Digitl Stellite or ny other omptile deoder. Antenn/Cle deoder* FIXING STRAP POWER swith medi reorder Aeril les: Connet the eril to the soket on the rer of the television. If you use deoder* nd/or medi reorder, it is essentil tht the eril le is onneted through the deoder nd/or through the medi reorder to the television. SCART leds: Connet the video reorder IN/OUT soket to the television. Connet the deoder TV soket to the television. Connet the medi reorder SAT soket to the deoder MEDIA REC. soket. Before running Auto Tuning, put your deoder nd medi reorder to Stndy. The phono sokets longside the COMPONENT VIDEO INPUT sokets will ept L nd R udio signls. The Digitl Audio Output soket enles the onnetion of suitle surround sound system. NOTE: this output is lwys tive. HDMI (High-Definition Multimedi Interfe) is for use with DVD deoder or eletril equipment with digitl udio nd video output. For eptle video or PC signl formts through the HDMI terminls, see pge 51. A wide vriety of externl equipment n e onneted to the k of the television; therefore, the relevnt owner's mnuls for ll dditionl equipment must e referred to for ext instrutions. We reommend SCART 1 for deoder nd SCART 2 for medi reorder. If onneting S-Video equipment, set EXT 2 Input mode to S- VIDEO. See pge 41. If the television utomtilly swithes over to monitor externl equipment, return to norml television y pressing the desired progrmme position utton. To rell externl equipment, press o to selet etween DTV, EXT 1, EXT 2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV. When the externl input mode is seleted while viewing DTV mode, the SCART soket does not output video/udio signls. The SCART output will lso e muted in EPG mode. Mnuftured under liense from Doly Lortories. Doly nd the doule-d symol re registered trdemrks of Doly Lortories. NOTE: Although this television is le to onnet to HDMI equipment, it is possile tht some equipment my not operte orretly. 9 HDMI, the HDMI logo, nd High-Definition Multimedi Interfe re trdemrks or registered trdemrks of HDMI Liensing, LLC. INSTAPORT nd INSTAPORT logo re trdemrks of Silion Imge, In. in the United Sttes nd other ountries.

10 CONNECTING YOUR TV Conneting n HDMI or DVI devie to the HDMI input The HDMI input on your television reeives digitl udio nd unompressed digitl video from n HDMI soure devie or unompressed digitl video from DVI (Digitl Visul Interfe) soure devie. This input is designed to ept HDCP (High-Bndwidth Digitl-Content Protetion) progrmme mteril in digitl form from EIA/CEA-861-D omplint [1] onsumer eletroni devies (suh s set-top ox or DVD plyer with HDMI or DVI output). For eptle video signl formts, see pge 51. NOTE: Some erly HDMI equipment my not work properly with your ltest HDMI TV, due to the doption of new stndrd. Plese unplug your HDMI le first nd then try setting the following options (Lip Syn, INSTAPORT ) to Off. Your erly HDMI soure should operte properly with your television. See pge 41. Supported Audio formt: Liner PCM, smpling rte 32/ 44.1/48kHz. To onnet n HDMI devie Connet n HDMI le (type A onnetor) to the HDMI terminl. For proper opertion, it is reommended tht you use n HDMI le with the HDMI Logo ( ). If your HDMI onnetion is ple of 1080p nd/or your television is ple of refresh rtes greter thn 50Hz, you will need Ctegory 2 le. Conventionl HDMI/DVI le my not work properly with this mode. HDMI le trnsfers oth video nd udio. Seprte nlogue udio les re not required (see illustrtion). See HDMI 1 Audio on pge 41. The HDMI 4 terminl is loted on the side of the television. Connet n HDMI-to-DVI dpter le (HDMI type A onnetor) to the HDMI 1 terminl nd udio les to the PC/ HDMI1 (AUDIO) soket (see illustrtion). The reommended HDMI-to-DVI dpter le length is 6.6 ft (2m). An HDMI-to-DVI dpter le trnsfers video only. Seprte nlogue udio les re required. See HDMI 1 Audio on pge 41. VIDEO To onnet DVI devie AUDIO L R L Audio le for HDMI to television onnetion (not supplied) DVI devie R IN OUT HDMI-to- DVI dpter Cle DVI /HDCP OUT NOTE: To ensure tht the HDMI or DVI devie is reset properly, it is reommended tht you follow these proedures: When turning on your eletroni omponents, turn on the television first, nd then the HDMI or DVI devie. When turning off your eletroni omponents, turn off the HDMI or DVI devie first, nd then the television. HDMI le HDMI devie VIDEO AUDIO L R HDMI OUT L R IN OUT To view the HDMI devie video, press the o utton to selet HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode. 10 [1] EIA/CEA-861-D ompline overs the trnsmission of unompressed digitl video with high-ndwidth digitl ontent protetion, whih is eing stndrdized for reeption of high-definition video signls. Beuse this is n evolving tehnology, it is possile tht some devies my not operte properly with the television. HDMI, the HDMI logo nd High-Definition Multimedi Interfe re trdemrks or registered trdemrks of HDMI Liensing LLC.

11 CONNECTING YOUR TV Conneting omputer With either n RGB/PC or n HDMI onnetion, you n wth your omputer s disply on the television nd her the sound from the televisions spekers. To onnet PC to the RGB/PC terminl When onneting PC to the RGB/PC terminl on the television, use n nlogue RGB (15-pin) omputer le nd PC udio le for the PC/HDMI1 (AUDIO) soket. Selet PC from the PC/HDMI 1 Audio options in the AV Connetion menu loted in the SETUP menu. the k of your television When PC input mode is seleted, some of the television s fetures will e unville e.g. Mnul Settings in the SETUP menu, Colour, Tint, Shrpness nd Blk/White Level in the PICTURE menu. If onneting ertin PC model with unique PC signl, the PC signl my not e deteted orretly. To onnet PC to the HDMI terminl When onneting PC to the HDMI terminl on the television, use n HDMI-to-DVI dpter le nd n nlogue udio le. If onneting PC with n HDMI terminl, use n HDMI le (type A onnetor). A seprte nlogue le is not neessry (see pge 10). the k of your television Mini D-su 15 pin onnetor Computer Audio le for PC to television onnetion (not supplied) Computer RGB PC le (not supplied) HDMI-to-DVI dpter le Audio le for PC to television onnetion (not supplied) Conversion dptor if required (not supplied) To use PC, set the monitor output resolution on the PC efore onneting it to the television. For eptle PC signl formts, see pge 50. To disply the optimum piture, use the PC setting feture (see pge 39). NOTE: The PC udio input terminl on the television is shred with the HDMI 1 nlogue udio input terminl (see pge 41). Some PC models nnot e onneted to this television. An dpter is not needed for omputers with omptile mini D-su 15-pin terminl. Depending on the DVD s title nd the speifitions of the PC on whih you re plying the DVD-Video, some senes my e skipped or you my not e le to puse during multingle senes. A nd my pper t the edges of the sreen or prts of the piture my e osured. This is due to sling of the piture y the set, it is not mlfuntion. For eptle PC nd video signl formts, see pge 51. NOTE: The edges of the imges my e hidden. If onneting ertin PC model with unique PC signl, the PC signl my not e deteted orretly. 11

12 CONNECTING YOUR TV Controls nd input onnetions A wide vriety of externl equipment n e onneted to the input sokets on the side of the television. Whilst ll the neessry djustments nd ontrols for the television re mde using the remote ontrol, the uttons on the television my e used for some funtions. Stndy Illustrtion represents 40LV685D. POWER swith COMMON INTERFACE The Common Interfe is for Conditionl Aess Module (CAM). Contt servie provider. USB port To ess photo files HDMI 4 INPUT (Not ville on ll models.) Input 3 (side) will tke priority over EXT 3 (k) if oth onnetions re used t the sme time. ORANGE LED - Progrmme timer set (digitl only) RED LED Progrmme timer Ative (digitl only) GREEN LED On Timer set RED LED Stndy GREEN LED Power on INPUT 3 (EXT 3) Swithing on If the RED LED is unlit, hek tht the mins plug is onneted to the power supply nd press the! (POWER) utton on the left side of the television to swith the television on. If the piture does not pper, press 1 on the remote ontrol. It my tke few moments. The GREEN LED will e lit. To put the television into Stndy, press 1 on the remote ontrol. To view the television, press 1 gin. The piture my tke few seonds to pper. Using the remote ontrol Press MENU on the remote ontrol to disply the menu. The menu ppers s list of five topis. As eh symol is seleted y pressing C or on the nvigtion ring on the remote ontrol, its respetive options will pper elow. NOTE: The sme menu is displyed in DTV (Digitl TV) nd ATV (Anlogue TV) modes; however, some items re greyed out in eh se. To operte the menu, press B nd on the remote ontrol to move up nd down, press C or to selet your desired setting. Follow the on-sreen instrutions. The funtions of eh menu re desried in detil throughout the mnul. Using the ontrols nd onnetions To lter the volume press 2 +. To lter the progrmme position press p B. Press MENU nd I, i, U or u to ontrol the sound nd piture options. Press MENU to finish. An S-Video le provides etter piture performne thn omposite video le. If you onnet n S-Video le to EXT 3, e sure to disonnet the stndrd (omposite) video le or the piture performne will e uneptle. To selet n externl input, press o until the pproprite input soure is seleted s desried on pge 40. Plese lwys refer to the owner s mnul of the equipment to e onneted for full detils. NOTE: Intertive video gmes tht involve shooting "gun" t n on-sreen trget my not work with this TV. 12

13 SETTING UP YOUR TV Strtup Applition Before swithing on the television, put your deoder nd medi reorder, if pplile, to Stndy. To set up the television, use the uttons on the remote ontrol s detiled on pge 7. Quik Setup Press the 1 utton. The Quik Setup sreen will pper. This sreen will pper the first time tht the television is swithed on nd eh time Reset TV is seleted. Quik Setup Menu Lnguge Country Primry Sutitle Lnguge Seondry Sutitle Lnguge Primry Audio Lnguge Seondry Audio Lnguge English UK English English English English g h Press Q, nd the Auto Tuning strt up sreen will pper with the option to selet etween DTV nd ATV, DTV or ATV if ville. Use C or to selet the pproprite mode. Press or B to highlight Strt Sn, nd then press Q. Auto Tuning Tuning Mode Strt Sn DTV nd ATV NOTE: If Cle is seleted in step 6, dditionl setting options pper in the Auto Tuning sreen. See the Ant/Cle In setion on the next pge. The television will strt to serh for ville DTV nd/or ATV hnnels. The progress r will indite the sn sttus. You must llow the television to omplete the serh. d e f Highlight Menu Lnguge nd press C or to selet the menu lnguge. Press to highlight Country nd C or to selet. The television is now set to tune the sttions for your ountry. NOTE: The following disply menus will differ slightly ording to the ountry you seleted. If there is not ountry tht you wnt to selet in the list or you wnt to view DTV progrmmes ut DTV is not seletle, selet Others. Press Q, nd the Lotion sreen will pper. Lotion To use the TV for displying in store showroom, plese selet [Store]. [Home] mode is reommended for norml use. Home Press C or to selet Home or Store. For norml home use, selet Home. Press Q. If the Ant/Cle In sreen ppers, press C or to selet Antenn or Cle. Ant/Cle In Antenn i j Auto Tuning Progress Found DTV Tune 3% 2 ATV Tune Witing... Chnnel: C7 When the serh is omplete the television will utomtilly selet position one. The Auto Tuning sreen will disply the totl numer of servies found. Press C or to view the DTV (digitl hnnel) or ATV (nlogue hnnel) lists. Use or B to move through the list to selet hnnel, nd then press Q to view. In ATV mode some res my reeive duplite sttions. There my not e ler piture or the signl my e wek, so the sttion order n e hnged using ATV Mnul Tuning. REMEMBER: Press ATV/DTV t ny time to selet etween ATV nd DTV (DTV TV/DTV RADIO/DTV TEXT if ville) modes. NOTE: The time will e set utomtilly y trnsmission ut n e dvned or deresed y using Lol Time Setting in the DTV Settings sreen. PLEASE NOTE The Reset TV menu n lso e essed t ny time from the SETUP menu. 13

14 SETTING UP YOUR TV From this menu, you n set the RF input onfigurtion to le. Ant/Cle In (if ville) Press MENU, nd selet SETUP menu. Use to highlight Ant/Cle In nd use C or to selet Antenn or Cle. NOTE: When you ttempt to hnge the Ant/Cle In setting, wrning messge will pper followed y PIN entry (if PIN hs een set) nd prompt for Auto Tuning. When Ant/Cle In is set to Cle, the following setting options will e provided in the Auto Tuning sreen. Press B or to selet n item, nd then press C or to selet your desired option. Auto Tuning Tuning Mode DTV Sn Type Strt Frequeny End Frequeny Modultion Symol Rte Network ID Strt Sn DTV nd ATV Quik Sn Auto Auto Auto Auto Auto DTV End Frequeny: This sets the frequeny t whih the sn will end. * Vlid entry rnge for frequeny items is for C-Book/Other nd for Nordig-C. If numers outside of this rnge re entered, the vlues will utomtilly e set to the min. or mx. vlid vlue s pproprite. DTV Modultion: You n hoose from five QAM modultion settings. DTV Symol Rte: This is the ud rte (KS/s) of the sn. * Vlid entry rnge for Symol Rte is If numer outside of this rnge is entered, the vlue will e utomtilly set to the min. or mx. vlid vlue s pproprite. DTV Network ID: This is the Network ID to e utilized for the sn. This item is greyed out when DTV Sn Type is set to Full Sn. * Vlid entry rnge for Network ID is If numer outside of this rnge is entered, the vlue will e utomtilly set to the min. or mx. vlid vlue s pproprite. With the exeption of DTV Sn Type nd DTV Modultion items, ll of the following items will hve 2 operting modes. The first is Auto where the vlues for eh item re preset y the system. The seond is n Input mode where you will e le to enter single vlue in ple of the pre-set vlue. If no hnnel is urrently tuned nd the Input stte is hosen, system defult vlue will e shown. However, if hnnel is urrently tuned when the item is essed, the vlue of the urrent hnnel will e displyed. DTV Sn Type: This item determines whether Quik Sn or Full Sn will e exeuted. The Quik Sn is simplified version of the Full Sn tht is designed to omplete in less time. DTV Strt Frequeny: This sets the frequeny from whih the sn will egin. 14

15 SETTING UP YOUR TV NOTE: As new servies re rodst, it will e neessry to re-tune the television in order to view them. Auto Tuning will ompletely re-tune the television nd n e used to up dte the hnnel list. It is reommended tht Auto Tuning is run periodilly to ensure tht ll new servies re dded. All urrent hnnels nd settings, e.g. loked hnnels, will e lost. Auto Tuning Press MENU nd use C or to selet SETUP menu. Use to highlight Auto Tuning. Press Q. ATV Mnul Tuning Tuning The television n e tuned-in mnully using ATV Mnul Tuning. For exmple, you might use the feture if the television nnot e onneted to medi reorder/deoder with SCART led or when you wnt to tune-in sttion on nother System. Use C nd to move ross the sreen nd selet ny of the ATV Mnul Tuning options. Then use B or to djust the settings. SETUP Menu Lnguge Country Ant/Cle In Auto Tuning ATV Mnul Tuning DTV Mnul Tuning DTV Settings AV Connetion English UK Antenn ATV Mnul Tuning System: I 1 I A C 2 0 V C R Position: The numer to e pressed on the remote ontrol to tune the hnnel. A sreen will pper wrning tht previous progrmmes nd settings will e deleted. Auto Tuning Previous settings will e lost! Press EXIT for no hnge. Tuning Mode Strt Sn DTV nd ATV Use C or to selet DTV nd ATV, DTV or ATV, if ville, then highlight Strt Sn nd press Q to ontinue with the Auto Tuning. NOTE: If you hve seleted "Others" for the Country field in the SETUP menu, nd selet tuning mode other thn "DTV", hoose the optimum ATV rodsting system (B/G, I, D/K or L). The television will strt to serh for ll ville DTV nd/or ATV servies. You must llow the television to omplete the serh. When the serh is omplete, the Auto Tuning sreen will disply the servies found. Use or B to move through the list to selet hnnel, nd then press Q to view. 2 System: Speifi to ertin res. 3 Colour System: Ftory set to Auto, should only e hnged if prolems re experiened, e.g. NTSC input from n externl soure. 4 Skip: Set Skip to On (8) or Off (() for the seleted hnnel. See pge Signl Clss: The hnnel lssifition. 6 Chnnel: The hnnel numer on whih sttion is eing rodst. 7 Serh: Serh up nd down for signl. 8 Mnul Fine Tuning: Only used if interferene/wek signl is experiened. See pge Sttion: Sttion identifition. Use the B or nd C or uttons to enter up to seven hrters. To llote position on the television for deoder nd medi reorder: turn the deoder on, insert pre-reorded film in the medi reorder, press PLAY, nd then mnully tune. 15

16 SETTING UP YOUR TV Press MENU nd using C or selet the SETUP menu. With highlight ATV Mnul Tuning nd press Q to selet. g Eh signl will e shown on the television, if it is not your medi reorder, press B or gin to restrt the serh. SETUP Menu Lnguge English h When your medi reorder signl is found, press to move long to Sttion. With B,, C nd put in the required hrters, e.g. VCR. Country Ant/Cle In Auto Tuning ATV Mnul Tuning UK Antenn ATV Mnul Tuning Sttion: VCR 1 I A C 2 0 V C R DTV Mnul Tuning DTV Settings AV Connetion i Press Q to sve. Use B or to highlight the desired position. We suggest Pos. 0 for medi reorder. j Repet for eh position you wnt to tune or, press MENU to return to the list of hnnels nd selet the next numer to tune. ATV Mnul Tuning Pos. Chnnel Sttion k Press EXIT when you hve finished C2 S10 C7 S40 l To nme externl equipment, e.g. DVD on EXT 2, press o to selet o2, then selet Mnul Settings from the SETUP menu C22 C25 C28 m Press to selet Lel then using B,, C nd put in the required hrters, nd then press Q. 8 C30 Mnul Settings Different Chnnel numers my e displyed. Lel: DVD EXT 2 A D V D Press Q to selet. If the hnnel hosen for the medi reorder is set to skip, Skip should e removed efore storing. PLEASE NOTE d Press to selet System nd use B or to hnge if required. ATV Mnul Tuning System: I 1 I A C 2 0 This television hs diret hnnel entry if the hnnel numers re known. Selet the ATV Mnul Tuning sreen in Step 3. Enter the Position numer, the System, then C for stndrd (terrestril) hnnels or S for le hnnels nd the Chnnel numer. Press Q to sve. e Then press to selet Serh. f Press B or to egin the serh. The serh symol will flsh. ATV Mnul Tuning Serh: 1 I A C

17 SETTING UP YOUR TV To prevent ertin hnnels from eing viewed, positions n e skipped. Skip Selet ATV Mnul Tuning from the SETUP menu. Chnnels my e moved nd sved to the position of your hoie. Sorting positions Selet ATV Mnul Tuning from the SETUP menu. Use B or to highlight the position to e skipped nd press Q to selet. With the list of hnnels showing, use B or to highlight the hnnel you wnt to move nd press. ATV Mnul Tuning Pos. Chnnel Sttion C2 S10 C7 ATV Mnul Tuning Pos. Chnnel Sttion S10 C7 C40 ABC1 4 S40 ABC1 5 C22 ABC1 5 C22 ABC1 1 C2 6 7 C25 C C25 C28 8 C30 8 C30 d Press to selet Skip. Use B or to turn Skip on. Press Q. 8 on the sreen indites skipped position. ATV Mnul Tuning d Use B or to move through the list to your preferred position. As you do so, the other hnnels will move to mke room. Press C to sve your move. Repet s neessry, nd then press EXIT. Skip: On 1 I A C 2 0 e Press RETURN nd repet from Step 2 or press EXIT. Eh position hs to e individully seleted. To turn Skip off, repet the proedure for eh position. Skipped positions nnot e seleted y PU nd Pu or y the ontrols on the television, ut n still e essed y the numer uttons on the remote ontrol. 17

18 SETTING UP YOUR TV DTV Mnul Tuning NOTE: This feture vries depending on the Ant/Cle In setting. Mnul Tuning This feture is ville for servie engineers or n e used for diret hnnel entry if the multiplex hnnel is known. Selet DTV Mnul Tuning from the SETUP menu nd press Q. DTV Mnul Tuning Signl Strength Qulity WEAK GOOD AVERAGE 85% Chnnel Strt Sn STRONG 76% Enter the multiplex numer using the numer uttons or use C or to djust the numer up or down. Highlight Strt Sn, nd then press Q. The television will utomtilly serh for tht multiplex. DTV Mnul Tuning New Pos New Chnnels - Totl 6 Nme ABC ONE ABC TWO ABC THREE ABC NEWS 24 ABCi 13 Type DTV Settings The hnnel order my e hnged to suit your personl preferene. Selet DTV Settings from the SETUP menu nd press Q. Selet Chnnels nd press Q. DTV Settings Chnnels Chnnel Options Sutitle nd Audio PIN Setting Prentl Control Lol Time Setting Auto Chnnel Updte DVB Chrter Set Chnnels With the list of hnnels showing use or B to highlight the hnnel you wnt to move nd press. Chnnels Pos ABCi Nme ABC ONE ABC TWO ABC THREE CABC Chnnel ABC NEWS 24 11:51 Off Stndrd TV d When the multiplex is found ny hnnels tht re not urrently in the hnnel list will e dded nd the hnnel informtion t the top of the sreen will e updted. Repet s neessry. Press EXIT to finish. Mnul Tuning for DVB-C When Ant/Cle In is set to Cle, DTV Mnul Tuning items re s follows: Frequeny input speifi frequeny to e snned Modultion hoose from one of five QAM modultion options Symol Rte input speifi ud rte (KS/s) to e used for the mnul sn d e Use or B to move through the list to your preferred position. As you do so, the other hnnels will move to mke room. Press C to sve your move. Repet s neessry, then press EXIT. To renumer the highlighted hnnel, press the RED utton on the remote ontrol. 18

19 SETTING UP YOUR TV Edit the hnnel numer using the numer uttons nd press Q. If the Auto Chnnel Updte is set to On, when the TV is in stndy mode, digitl tuning is utomtilly exeuted nd ny new hnnels re sved. Chnnels Pos Nme ABC ONE ABC TWO ABC THREE CABC Chnnel ABC NEWS 24 ABCi Auto Chnnel Updte Selet DTV Settings from the SETUP menu nd press Q. TV Lotion setting You n selet either Home or Store mode. Home is reommended for norml home use. Selet Store when diplying the television in shop, et. Selet Lotion from the SETUP menu. Press C or to selet Home or Store. Anlogue swith-off This is digitl television whih is integrted to llow the use of oth digitl nd nlogue servies. However, during the lifetime of this set it is very likely tht nlogue servies will e swithed off to llow for more new digitl servies. This swith-off will hppen in numer of phses, whih will e dvertised in your re well in dvne. It is reommended tht t eh phse the television is re-tuned to ensure tht existing nd new digitl servies n e viewed without disruption. Press to selet Auto Chnnel Updte nd use C or to selet On. This feture llows you to mnully set the hrter set (Stndrd = Tle 0, West = Tle 5 or Ltin lphet 9) to e used for DVB-C or DVB-T hnnels. DVB Chrter Set Selet DTV Settings from the SETUP menu nd press Q. Press to selet DVB Chrter Set nd use C or to selet Stndrd, West or Ltin lphet 9. If the rodst informtion hs hnged in your DVB-T reeiving re, the TV sreen will disply the messge "Brodst informtion hs hnged. Would you like to resn now?" Plese follow the messge. Dynmi Sn Selet DTV Settings from the SETUP menu nd press Q. Press to selet Dynmi Sn nd use C or to selet On. 19

20 CONTROLS AND FEATURES Generl ontrols Seleting positions To selet position, use the numered uttons on the remote ontrol. Positions n lso e seleted using PU nd Pu. To disply on-sreen informtion suh s position, input mode or stereo/mono signl, press. Press gin to nel. The Time Disply nlogue only The time disply fility llows the urrent (text servie) time to e seen on the television sreen. Press D whilst wthing norml television rodst to see the time disply from the rodster. It will remin on sreen for out 5 seonds. NOTE: This disply my not e ville in some ses. Stereo nd Bilingul trnsmissions For ATV progrmmes If stereo or dul lnguge rodsts re trnsmitted, the word Stereo or Dul will pper on the sreen eh time positions re hnged, disppering fter few seonds. If the rodst is not in stereo, the word Mono will pper. Stereo Press s to selet Stereo or Mono. Bilingul Bilingul trnsmissions re rre. If they re trnsmitted, the word Dul will e displyed. Choose the required progrmme numer nd if the word Dul ppers press s to selet Dul 1, Dul 2 or Mono. For DTV progrmmes For stereo or dul mono rodsts, press s nd use C or to selet settings. Mode Disply Pressing Stereo Stereo S Left S Right Dul mono Dul 1 S Dul 2 S Dul Mono Multihnnel Quik Menu Quik Menu helps you ess some options quikly, suh s Piture Mode, Piture Size, More Informtion, Sleep Timer et. Press QUICK to disply the Quik Menu nd use B or to selet the option. Quik Menu Piture Mode Piture Size More Informtion Sleep Timer Medi Plyer Hedphone Level System Informtion NOTE: Quik Menu items re different depending on the urrent mode. Mode Quik menu item Desription When viewing Piture Mode See pge 25. TV progrmme or pitures from the Piture Size See pge 23. externl input Chnnels See pge 37. More Informtion See pge 35. Sleep Timer See pge 33. Medi Plyer See pge 30. Hedphone Level See pge 22. System Informtion See pge 39. When using EPG Genre Colour See pge 35. EPG Updte/ Cnel EPG Updte See pge 35. When using Medi Plyer 0 AutoView Super Live 00:00 Piture Size See pge 23. Intervl Time See pge 31. Repet See pge 31. For multi-udio trk rodsts, press s repetedly to hnge the udio lnguge (see Audio lnguge on pge 37). 20

21 CONTROLS AND FEATURES Sound ontrols Volume Press Y or y to djust the volume. Sound Mute Press one to turn the sound off nd gin to nel. If progrmme or film is eing rodst with soundtrk in more thn one lnguge, the DUAL feture llows seletion etween them. Press MENU nd C or to selet SOUND. Use to highlight Dul, nd then press C or to hoose etween Dul 1 or Dul 2. The sound ontrols re essile in digitl nd nlogue modes. Selet the SOUND menu. Press to highlight Bss, Trele or Blne nd C or to hnge the setting. Stereo Extension, Voie Enhnement, nd Dynmi Bss Boost help to rete n enhned surround sound experiene with deep, rih ss from stereo sound soures. Your TV s udio will sound fuller, riher, nd wider. Volume ontrols nd mute sound Dul SOUND Dul Dul 1 Bss 0 Trele 0 Blne 0 Advned Sound Settings Stle Sound Off Dynni Rnge Control On Audio Level Offset Bss, Trele nd Blne Advned Sound Settings In the SOUND menu, press to highlight Advned Sound Settings, nd then press Q. Press to highlight Stereo Extension, nd then press C or to selet On or Off. d Press to highlight Voie Enhnement then press C or to selet On. Press to highlight Dynmi Bss Boost nd using C or selet the desired ss expnsion level (Off, Low or High). The Stle Sound feture limits high volume levels in order to prevent the extreme hnges in volume tht n our when hnnels re hnged or progrmme swithes to ommeril. Selet the SOUND menu. Use to highlight Stle Sound, nd then press C or to selet On or Off. This feture provides onsistent sound volume regrdless of progrmmes, hnnels or input soures. NOTE: In the SOUND menu, press to highlight Doly Volume. Press C or to selet Low, High or Off. The Doly Volume setting influenes the Dynmi Rnge Control nd Digitl Audio Output settings. If Dynmi Rnge Control is set to On, this feture will e disled. This feture llows ontrol of udio ompression for some digitl TV progrmmes. (MPEG-1 nd MPEG-2 udio progrmmes re not supported.) NOTE: Advned Sound Settings Stereo Extension Voie Enhnement Dynmi Bss Boost Stle Sound (LV series only) Doly Volume (RV series only) Dynmi Rnge Control In the SOUND menu, press to highlight Dynmi Rnge Control. Press C or to selet On or Off. For LV series: If the Stle Sound nd Dynmi Rnge Control fetures re oth set to On, eh effet my not e notiele. For RV series: This feture is disled when Doly Volume is set to Low or High. Off On High 21

22 CONTROLS AND FEATURES Sometimes there n e lrge hnges in volume when swithing from DTV 5.1h to DTV 2h, n ATV hnnel, or n externl input. Using the Audio Level Offset feture redues these volume differenes. d Set the volume level usully used when wthing DTV 5.1h progrmme. Tune to hnnel whih is DTV 2h or ATV, or n externl input. In the SOUND menu, press to highlight Audio Level Offset nd press Q. Press to highlight n option, then use C or to djust the volume level. NOTE: The ville item differs depending on the urrent input soure. For exmple, while wthing DTV 2h progrmme, only DTV 2h is ville nd the other two items re greyed out in the menu. This llows you to esily djust eh item ording to eh ondition. When wthing DTV 5.1h progrmme, this feture is not ville. This setting is used to set the sound output when hedphones re onneted. Speker Link Audio Level Offset Hedphone Settings Hedphone On Sound is output (2 + is ville.) Off Audio Level Offset DTV 2h ATV Externl Input Sound is output (Hedphone level menu is ville.) No sound Spekers Sound is output (2 + is ville.) Audio desription is n dditionl nrrtive sound trk for visully impired individuls tht llows the story line to e understood nd enjoed more fully. If this funtion hs een tivted y pressing the AD key, the letters AD will e displyed in the hnnel nner when progrmmes ontin AD ontent. You n hoose to her sound from the TV spekers nd the hedphone output or only from the hedphone output. d Hedphone Settings Speker Link Hedphone Level From the SOUND menu selet Audio Desription nd press Q. Highlight Audio Desription, nd then press C or to selet On. Audio Desription Audio Desription Mixing Level Speker Out Audio desription To djust the level of the udio desription sound to the min sound, highlight Mixing Level nd use C or. Highlight Speker Out, nd then press C or to selet On or Off. On: sound from oth the hedphone output nd spekers. Off: sound from the hedphone output. See "Hedphone Settings" to djust the hedphone sound Off On Off In the SOUND menu, press to highlight Hedphone Settings, nd then press Q. Press to highlight Speker Link nd use C or to selet On or Off. If you selet Off, then highlight Hedphone Level nd use C or to djust the hedphone sound. 22

23 CONTROLS AND FEATURES Widesreen viewing Depending on the type of rodst eing trnsmitted, progrmmes n e viewed in numer of formts. WIDE Use this setting when wthing widesreen DVD, widesreen video tpe or 16:9 rodst (when ville). Due to the rnge of widesreen formts (16:9, 14:9, 20:9 et.) lk rs my e visile on the top nd ottom of the sreen. 4:3 Use this setting to view true 4:3 rodst. SUPER LIVE This setting will enlrge 4:3 imge to fit the sreen y strething the imge horizontlly nd vertilly, holding etter proportions t the entre of the imge. Some distortion my our. CINEMA When wthing ll sides pnel formt films/video tpes, this setting will eliminte or redue the lk rs t ll sides of the sreen y zooming in nd seleting the imge without distortion. SUBTITLE When sutitles re inluded on letterox formt rodst, this setting will rise the piture to ensure tht ll of the text is displyed. SUBTITLE 14:9 Use this setting when wthing 14:9 rodst. 23

24 CONTROLS AND FEATURES NATIVE This setting will show the piture without over sn, i.e. WYSIWYG. This option is only ville when in the HDMI input mode. PC NORMAL This setting will show the piture without over sn, i.e. WYSIWYG. This option is only ville when wthing PC signl soure vi HDMI or PC terminl. PC WIDE This setting will show the piture without over sn nd side pnels. This option is only ville when wthing PC signl soure vi HDMI or PC terminl. Dot y Dot Dot y Dot is non-sling disply. Depending on the input signl formt, the piture is displyed with side pnels nd/or rs t the top nd ottom (e.g. VGA input soure). Press QUICK nd highlight Piture Size, then press Q to disply the list of ville widesreen formts. Use B nd to highlight the required formt nd press Q to selet. AV formt Piture Size Wide Super Live Cinem 4:3 Sutitle 14:9 Ntive PC formt Piture Size PC Norml PC Wide Dot y Dot Using the speil funtions to hnge the size of the displyed imge (i.e. hnging the height/width rtio) for the purposes of puli disply or ommeril gin my infringe on opyright lws. 24

25 CONTROLS AND FEATURES Piture ontrols Most of the piture ontrols nd funtions re ville in oth digitl nd nlogue modes. PLEASE NOTE: fetures not ville will e greyed out. The piture position my e djusted to suit personl preferene nd n e prtiulrly useful for externl inputs. In the SETUP menu press until Piture Position is highlighted. SETUP Country Ant/Cle In Auto Tuning ATV Mnul Tuning DTV Mnul Tuning DTV Settings AV Connetion Piture Position Press Q to view the options ville for the piture formt tht hs een seleted. Press B nd to selet n option, then C or to djust the settings. The options differ depending on the urrently seleted widesreen formt nd the input signl. In Cinem: Piture Position UK Antenn This television offers the hoie of personlising the piture style. AutoView, Dynmi, Stndrd, Movie, Store, Gme nd PC re preset options nd ffet mny fetures/settings within the television. NOTE: Beuse the AutoView mode utomtilly djusts piture settings sed on mient light onditions nd input signl ontent, the Auto Brightness Sensor nd Expert Mode menus re greyed out when it is seleted. Store mode is only ville when Lotion is set to Store. Gme mode is ville in externl input mode (other thn eril input). When you selet Gme mode, suitle widesreen formts will e seleted. PC mode is ville in RGB/PC input mode or HDMI input mode. In the PICTURE menu press to selet Piture Mode. PICTURE Piture Mode Reset Bklight Contrst Brightness Colour Tint Shrpness Piture Mode Press C or to selet the piture mode you prefer nd press Q. NOTE: The piture mode you selet ffets the urrent input only. You n selet different piture mode for eh input AutoView Piture Position Horizontl Position Vertil Position Reset To return to the originl ftory settings selet Reset in the Piture Position menu nd press Q. 0 0 You n ustomise urrent piture mode settings s desired. For exmple, while seleting "Dynmi," if you hnge the following items, suh s Bklight, Contrst, Brightness, Colour, Tint, Shrpness nd the Advned Piture Settings items, your new settings re sved for "Dynmi" piture mode. Piture preferenes In the PICTURE menu press to selet either Bklight, Contrst, Brightness, Colour, Tint or Shrpness nd press Q. Press C or to djust the settings. 25

26 CONTROLS AND FEATURES This feture resets ll piture settings to the ftory settings exept Piture Mode. NOTE: If ny piture settings hve not een hnged, Reset is not ville. Reset In the PICTURE menu press to selet Reset nd press Q. A onfirmtion messge will pper. Press C or to selet Yes nd press Q. d Press C or to selet Hue, Sturtion or Brightness, nd then press B or to djust the settings s required. Hue Sturtion Brightness Red Press Q to return to the previous menu. To return to the ftory settings, selet Reset nd press Q. When 3D Colour Mngement is set to On it llows the Bse Colour Adjustment feture to eome ville. In the PICTURE menu press to selet Advned Piture Settings nd press Q. Press to selet 3D Colour Mngement. Press C or to selet On or Off, nd then press Q. The Bse Colour Adjustment feture llows the djustment of individul olours to suit personl preferene. This n e useful when using n externl soure. 3D Colour Mngement Advned Piture Settings 3D Colour Mngement Bse Colour Adjustment Colour Temperture Auto Brightness Sensor Settings Ative Bklight Control Blk/White Level 10 Stti Gmm 0 Noise Redution Bse Colour Adjustment In the Advned Piture Settings menu press to selet Bse Colour Adjustment, nd then press Q. Press B or to selet n option, then press to move to the djustment window. On On Colour Temperture inreses the wrmth or oolness of the piture y inresing the red or lue tint. d Colour Temperture In the Advned Piture Settings menu press to selet Colour Temperture nd press Q. Press C or to selet the Colour Temperture setting (0 (wrm) 10 (ool)). Colour Temperture Colour Temperture 5 Red-Offset Green-Offset Blue-Offset Red-Gin Green-Gin Blue-Gin Reset Press B or to selet the option you wnt to djust, nd then press C or to djust the settings. Press Q to return to the previous menu. To return the Colour Temperture settings to the ftory defults, selet Reset nd press Q. NOTE: If Piture Mode is set to AutoView, you n djust Colour Temperture only, nd the rnge will e -5 to Bse Colour Adjustment Hue Sturtion Brightness Red Green Blue Yellow Mgent Cyn Reset 26