1 STM 26 HD DVB-S2+T2/C Compact meter User Manual Ref R13
2 Preface USER MANUAL Please read this manual carefully before using your Digital Sat meter for the first time. This operating manual will help you in the Appropriate, Safe & Favorable The technical specifications and operating methods included in this manual are subject to changes without notice. In case of any inquires after a period of usage, please contact the manufacturer. Safety Precaution Please read the safety instructions carefully before operating the device. Please follow all warnings and instructions on the equipment and in the operating manual. Safety of persons Ensure that nobody can be hurt by falling tools or parts of the sate antenna during the adjustment and installation of the antenna. For own security, use a rope on sloping roofs. Attention for adapter The devise should only be operated with the supplied AC adapter at the mains. Do not open the meter or the included AC adapter. There is danger of life through electric shock! Wrong usage of the ports can lead to the destruction of the measuring device. Proceed carefully with the measuring device: Avoid low temperatures (below 0 C) or to high humidity. The TFT display can be damaged by mechanical impacts. Avoid excessive input voltages. Please refer to the technical data Do not operate with the device: If it has visible damage, If there are loose parts in the device, If the device was located outdoors or in damp rooms a extended period of time. Main Supply: Before operating, please check the units operating voltage is 90~240V AC 50/60Hz. Overload: Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this may result in electric shock. Liquid: The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as base, shall be placed on the apparatus. Ventilation: Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets. Do not expose there receiver to direct light or do not place it near a heater or in humid conditions. Do not stack other electronic equipments on top of the receiver. Cleaning: Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or mild solution of washing-up liquid (no solvents). Location: Put the receiver indoor in order to avoid lightening, raining or sunlight. Uncover: Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licensed service personnel to repair the receiver, or contact your dealer. 1
3 I. REFERENCE GENERAL FEATURES BRILLIANT ON SCREEN GRAPHIC... 4 II. PRODUCT OVERVIEW... 4 III. DETAILED OPERATION GUIDE POWERING ON SATELLITE TP Search Satellite IDE Packet Control DiSEqC Search Motor Spectrum TERRESTRIAL TP Search TP IDE Packet Control Spectrum CABLE TP Search TP IDE Packet Control Spectrum WATCH TV
4 3.6 SETTINGS System Settings OSD Setup Times Factory Default Color Settings Screen Settings System info EXPANSION USB IP Setting FTP Download PING BASIC OPERATION PVR TP PVR Auto Timeshift Find Scan IV. ADDITIONAL INFORMATION
5 I. Reference USER MANUAL 1.1 General Features DVB-S/S2 Compliant, DVB-T/T2 Compliant, DVB-C. MPEG-1, MPEG-2 H.264, VC1, DV, MPEG-4, H Brilliant on Screen Graphic User Friendly OSD Menu with Full Function Storing 8000 Channels USB 2.0 Host Controller Software Upgrade via USB Satellite Identify DiSEqC Search Spectrum Packet Control Constellation II. Product Overview DVB-S2+T2/C HEVC - POWER: Turn the product on/off. - LCD Screen: Shows Menus and Programs clearly. - Power light : Indicates the power status Red: the product is power on.. Green: the product is charging. - LOCK light: This light will be on when signal is locked - 13V/18V light : Indicate the 13V/18V 4
6 - AV IN: Use this product as a television - FIND: Enter the menu of measurement signal, you can measure the signal about transponder quickly. - SCAN: In the S2 model, it is blind scan, in the T and C model, it is auto search. - MENU: Enter the main menu. - Function: Made of 4 keys, F1 - F4. - EXIT: Exit from the present menu and back to the previous menu. - Arrow key and OK: Press the Arrow key to select the right item then press OK key to confirm. - NUMERIC KEY (0~9): Enter a TV/radio channel number or menu option number. - HDMI Port: Use HDMI line connect to TV. - USB Port: One USB Host Port. - ON/OFF: Switch the battery on/off. - DC 12V: Connect to the power adaptor. - Tuner: Connect to the satellite antenna cable signal or the Terrestrial or Cable signal. - LAN: Connect to the internet using an Ethernet cable. - AV/DC OUT: Use AV line connect to TV or connect to other equipment as a television. III. Detailed Operation Guide 3.1 Powering On Power on by pressing the POWER button on the panel. Note: In this menu, you can press F1/F2 button to set brightness and press F3/F4 button to set contrast. 5
7 3.2 Satellite Main Menu-> Satellite Press OK button to enter the satellite menu TP Search Main Menu-> Satellite->TP Search Highlight the TP Search and press the OK button to enter Select Satellite. In this menu, you can Select, Add, Delete, Rename, and Move to satellite. Select satellite and press the ok button to enter TP Search. This menu allows you to configure the antenna setting parameters. You can select satellite, transponder, LNB TYPE,LNB Power,22KHz,DiSEqC1.0,DiSEqC Delete: If you highlight the Satellite, press F1 button to delete satellite. If you highlight the Transponder, press F1 button to delete transponder. - Start Search: After configure the antenna setting, press the F2 button to TP search. - Constellate: Press the F3 button to display constellation. - Explorer:Press the F4 button to explorer the signal information. 6
8 - USER MANUAL Satellite: Press the / to select satellite or press the ok button to enter satellite list, then select satellite. When you highlight the satellite and press ok button, you also can execute Delete, Add, and Move to and Rename satellite. Transponder: Press the / to select transponder or press the ok button to enter transponder list, then select transponder. When you highlight the transponder and press ok button, you also can execute Delete, Add, Delete, and Edit transponder and Edit PID. Note: If you change the satellite, the transponder will be changed automatically Satellite IDE. Main Menu-> Satellite->Satellite IDE. If you don t know the signal information of some usual sat, in this menu, please wait a moment, it will find the satellite identify Packet Control Main Menu-> Satellite -> Packet Control In this menu, the TP will be displayed round. And you can know the strength and quality of each transponder. Note: a) The satellite showed in this menu is what you select in TP Search menu. b) The transponders are found by auto scan. c) When you are saving the TP, please don t exit this menu. Otherwise, it will be stopped. - Left/Right: Press left/right button to select DiSEqC Port and LNB Type - Refresh: Press F1 button to lock the first TP again. - Save: Press F2 button to star for saving, and press it again to stop. - 1 Hour: Press F3 button to save it during one hour. - 1 Day: Press F3 button to save it during one day. 7
9 3.2.4 DiSEqC Search Main Menu-> Satellite -> DiSEqC Search If you connect to the DiSEqC 1.0 or DiSEqC 1.1, it will search the satellite which it is connected, then you can press F1 button to the port which you searched.you also can press the F2 button to change DiSEqC type, press F4 button to change LNB Type, Motor Main Menu-> Satellite -> Motor Highlight the Motor and press ok button to enter the motor search. In this menu, you also can Delete, Add, and Move to and Rename satellite and Delete, Add, Delete, and Edit transponder and Edit PID. - West/East: Press F1 button to turn Motor to west and press F2 button to turn Motor to east. - Start Search: After configure the antenna setting, press the F3 button to TP search. - Setup: If you set the motor mode to USALS, you need press F4 button to set the longitude and latitude. - Motor mode: Highlight the Motor and press the / button to select DiSEqC1.2 or USALS. Note: After enter setup menu, you should turn your machine until it is show the compass Spectrum Main Menu-> Satellite -> Spectrum In this menu, you can know the strength of all transponders. Press the F1 button to keep the spectrum, and press the F2 button to analyze spectrum, and press the F3 button to mark spectrum, and press F4 button to next page. 8
10 In the next page, you can press the F1 button to change Polarization control Hor / Ver, press F2 button to switch 22KHz signal on or off, and Press the F3 button to switch DiSEqC, and press F4 button to previous page. 3.3 Terrestrial Main Menu-> Terrestrial Press OK button to enter the Terrestrial menu. Note: In this menu, you can press F1/F2 button to set brightness and press F3/F4 button to set contrast TP Search Main Menu-> Terrestrial ->TP Search In this menu, you can Delete, Add, Search Channels. 9
11 - TP: Highlight the TP, press the / button to switch TP or press the ok button to enter TP list, then select TP. In the TP list, you can press the / button to switch TP one by one, and press / button to Page up/down TP list. You also can enter channel number to select TP. - Band: Press the / button to change band to 6M/7M/8M. - Search Channel: Press the / button to change search type, you can select manual search, auto search. - Delete: Highlight the TP and select the TP, then press F1 button to delete TP - Add: Press F2 button to add TP. - Manual Search: Press F1 button to search channels from the selected TP. You will be asked to confirm whether only search FTA channels or not, if you select Yes, you will only search FTA channels. You also will be asked to confirm whether network search or not, if you select Yes, it will go to search automatically and save the found channels when the search is completed. - Auto Search: Press F4 button to search channels of all TP. You will be asked to confirm whether network search or not, if you select Yes, it will go to search automatically and save the found channels when the search is completed TP IDE. Main Menu-> Terrestrial ->TP IDE. In this menu, you can know the exact information about the transponder which you selected. You also can execute Delete and Add transponder, Manual Search and Auto Search. - MER: Modulation error rate. - SNR: It will show the carrier to noise ratio of the transponder which you selected. - Pre BER: Forward error correction. - Post BER: Afterward error correction. - Modulate: Modulation efficiency. - FFT Mode: Fast Fourier Transform 10
12 3.3.3 Packet Control Main Menu-> Terrestrial ->Packet Control In this menu, you can know the strength and quality of each transponder. And the transponders are found by auto scan Spectrum Main Menu-> Terrestrial ->Spectrum In this menu, you can know the strength of all transponders. - Span: Modulation efficiency. - / :Press F1/F2 button to change the transponder - / : Change the range of the Y-axis. - Span: Press the F3 button to set transponder of span. - Save Spectrum: Insert USB, press F4 button to save the picture of spectrum. 11
13 3.4 Cable Main Menu-> Cable Press OK button to enter the Cable menu. Note: In this menu, you can press F1/F2 button to set brightness and press F3/F4 button to set contrast TP Search Main Menu-> Cable ->TP Search In this menu, you can Delete, Add, Search Channels. - TP: Highlight the TP, press the / button to switch TP or press the ok button to enter TP list, then select TP. In the TP list, you can press the / button to switch TP one by one, and press / button to Page up/down TP list. You also can enter channel number to select TP. - Search Channel: Press the / button to change search type, you can select manual search, network search, auto search, blind search. - Delete: Highlight the TP and select the TP, then press F1 button to delete TP - Add: Press F2 button to add TP. - Manual Search: Press F1 button to search channels from the selected TP. - Auto Search: Press F4 button to search channels of all TP. - Network Search: It will go to search automatically from the selected TP. - Blind Search: A slow scanning, but may get more transponders. 12
14 3.4.2 TP IDE. Main Menu-> Cable ->TP IDE. USER MANUAL In this menu, you can know the exact information about the transponder which you selected. You also can Delete and Add transponder, Manual Search and Network Search. - MER: Modulation error rate. - Pre BER: Forward error correction. - Post BER: Afterward error correction. - Power: It will show you the strength of the transponder what you selected. - Modulate: Modulation efficiency Packet Control Main Menu-> Cable ->Packet Control In this menu, you can know the strength and quality of each transponder Spectrum Main Menu-> Cable ->Spectrum In this menu, you can know the strength of all transponders. - Span: Modulation efficiency. - / :Press F1/F2 button to change the transponder - / : Change the range of the Y-axis. - Span: Press the F3 button to set transponder of span. - Save Spectrum: Insert USB, press F4 button to save the picture of spectrum. 13
15 3.5 Watch TV Main Menu-> Watch TV In this menu, you can watch TV and edit channels. - Select satellite: Press F1 button to select Satellite or DVBT or DVBC. - Channel: Press F2 button to enter Channel menu. In this menu, you can Press F1 button to selectdvb-s2, DVB-T2 or DVB-C, and press F2 button to switch between TV and RADIO, and press F3 button to switch channel type (FTA/CAS/HD), and press F4 button to enter Channel Manger menu. In this menu, you can press F1 button to delete channels, press F2 button to move channels, and press F4 button or press EIXT button to exit channel manage menu. - Full Screen: Press F3 button to watch TV by full screen. - Program Analyze: Press F4 button to know more information about program. 3.6 Settings Main Menu->Settings In this menu, you can set System settings, OSD settings, Screen settings, and times. You also can do factory default, and view system information about instrument. 14
16 3.6.1 System Settings USER MANUAL Main Menu->Settings->System Settings In this menu, you can set all system settings by press / button. - Menu Language: Set the menu language. - Audio 1: Set the preferred audio language. - Audio 2: Set the sub-prime audio language. - Digital Audio: Select PCM / RAW as default output. - DVBT Power: If you set it on, it will provide voltage for T tuner. - Signal Audio: If you set ON, in the TP Search menu when you highlight a transponder with signal, it will sound automatically. If you set OFF, in the TP Search menu when you highlight a transponder with signal, it will not sound. - Power Unit: Change the power unit.. - OSD Type: Change the OSD Type OSD Setup Main Menu->Settings->OSD Setup - Display Mode: Set the HD format between 1080p, 1080i, 720p, 480i, 480p. - TV Type: Set the TV Type on PAL/NTSC/Auto state. - Screen Mode: Set the display format according to the screen ratio. Select TV screen mode either 4:3 or 16:9 according to the TV type, or press the MODE button of RCU directly Times Main Menu->Settings->Times a) Time Settings : In this menu, you will set the time mode, time zone and summer time b) Sleep Timer You can set the time to make receiver sleep automatically. 15
17 3.6.4 Factory Default Main Menu->Factory Default USER MANUAL In this menu, you can restore the product to the factory default. - ALL: All data and settings will be deleted. - Channel List Only: All channels data will be deleted. - Radio Channel Only: All radio channels data will be deleted. - Scramble Channel Only: All scramble channels data will be deleted Color Settings Main Menu-> Settings-> Color Settings You can set the Brightness/Contrast/Saturation in this menu Screen Settings Main Menu-> Settings-> Screen Settings In this menu, you can set up Sharpness/Brightness /Contrast/Saturation/LCD Backlight/LED Backlight System info Main Menu-> Settings-> System Info In this menu, you can get the information about the STB, such as Model ID, Hardware & Software version, Load version and Date. When you need service from the dealer you need to submit this information in order to get the correct and fast after sales service. 3.7 Expansion Main Menu-> Expansion 16
18 3.7.1 USB USER MANUAL Main Menu-> Expansion -> USB In this menu, you can press the / button to select the category that you like to play. The media files are partitioned into all, Stream, Movie, Music, Picture, Software and other. a) Upload - Press F1 button to upload software, data, channel list. You also can upload software to FTP. b) PVR Setting - Press F2 button to set Record partition/type/time, Time shift Buffer size and Time shift need save, play start POS. c) Tool - Press F3 button to edit USB. You can Rename, Delete, Move to, Copy to files, create new folder, sort and Format disk. d) Play Mode/Play list - If you highlight All/Software/Other, the F4 will display play mode, else the F4 will play list. e) Movie - It supports*.3gp,*.avi,*.dat,*.divx,*.flv,*.mkv,*.mov,*.mp4,*.mpg,*.ts,*.vob format movie files. f) Music - It supports *.mp3,*. Flac,*.mp2,*.wav,*.ogg format music files. g) Picture - It supports *.bmp, *.jpg,*.gif format photos. h) Software - Insert USB to your PC, copy the update file to the USB. - Insert the USB to STB when it is starting up. - In main Menu>Expansion>USB, find and select the upgrade file, then press ok button, it will upgrade the file. - After upgrade, the STB will restart automatically. And after restart you can search channel and test it. Note: During the process of upgrading the S/W, please don t power off. 17
19 3.7.2 IP Setting USER MANUAL Main Menu-> Expansion -> IP Setting If you connect the internet by using Ethernet cable it will display the connected IP address FTP Download Main Menu-> Expansion -> FTP Download If the network is connected, enter correct Server, IP, User Name, Password, and highlight Connect Net, press OK button, if the connection is successful, you can download software, music, photo and other media files from FTP menu. You also can upload software, music, photo and other media files to FTP PING Main Menu-> Expansion -> PING In this menu, you can through PING function to test the network. 3.8 Basic Operation PVR When you watch a program, you can press the F4 button and select PVR item to begin recording. - Mute: Mute audio. - Info: You can press F3 button to view information about recording. - Stop: You can press F4 button to stop recording. Note: a) Before recording, you should insert USB to STB. b) You can watch the other program from the same TP while recording. 18
20 3.8.2 TP PVR When you watch a program, you can press the F4 button and select TP PVR item to begin TP PVR. It allows record all program under the same TP. At the same time, you can only watch the program from the same TP Auto Timeshift When you watch a program, you can press the F4 button and select Auto Timeshift item to begin Timeshift. Auto Timeshift allows you to pause a live broadcast and return to it later and continue where you left off. While it is in timeshift mode, press the F1 button to display the playing menu, press F2 button to stop Timeshift. In this menu you can press F1 button to fast backward the program, press F2 button to play or pause the program, press F3 button to display recording information, and press F4 button to stop playing recording Find Press the FIND button to display the signal finding menu, jump to Satellite/Terrestrial/Cable identify menu, rest operation same as above. If you select Satellite, you can configure the antenna setting parameters, and press F1 button to lock signal. Then you can view the information about this Sat-IF, you also can view constellate and spectrum. If you select Terrestrial or Cable, you can enter the TP, and press F1 button to lock signal. Then you can view the information about this TP, you also can view constellate. 19
21 3.8.5 Scan In the S2 model, it is blind scan and fast scan, in the T and C model, it is auto search. Blind Search: Press Scan button and select satellite, then You will be asked to confirm whether Fast Scan or not, if you select NO, it will enter blind search menu. In this menu, you also can execute Delete, Add, and Move to and Rename satellite and Delete, Add, Delete, and Edit transponder and Edit PID. - Blind Search: You can Press F1 button to get more transponders of this satellite. - Satellite Search: Press F2 button to search all transponders of this satellite. - Change DiSEqC: Press F3 button to change DiSEqC Port. - LNB Type: Press F4 button to change LNB Type. Fast Scan: Press Scan button and select satellite, then You will be asked to confirm whether Fast Scan or not, if you select YES, it will enter fast scan menu. - Provider: You can press the / button to select provide or press ok button to enter provider list, then select the provider. - Start Search: Highlight the Start Search, and press OK button to search channels from the same provider what you selected. 20
22 - USER MANUAL IV. Additional Information Satellite Tuner & Demodulator Frequency Range Input Connector Signal level LNB supply LNB switch control 950MHz-2150MHz Female -65dBm~-25dBm 13/18V,max400mA 22KHz DiSEqC DiSEqC 1.0 /1.1 / 1.2 Symbol rate Spectral inversion 2Mbps~45Mbps Auto conversion Terrestrial and cable Tuner & Demodulator Frequency Range Input Connector RF Impedance IF Band width Demodulation FFT Mode Constellation Guard Interval Inner Coding Rate 107MHZ to 858MHZ IEC Female 75Ωunbalanced 6M, 7M, 8M COFDM Auto Auto Auto Auto 21
English CONTENTS 1. GUIDE...2 1.1 IMPORTANT SAFETY INSTRUCTIONS...2 1.2 UNPACKING...2 1.3 PRODUCT OVERVIEW& ILLUSTRATION...3 1.4 INSTALLATION OF METER...4 2. OUTLINE...5 3. THE MENU OSD INSTRUCTION...6
DIGITAL SATELLITE METER THE PROFESSIONAL EQUIPMENT DIGITAL SATELLITE METER THE PROFESSIONAL EQUIPMENT USER S MANUAL Product Description 1.Guide 2. Menu 1.1 Face Panel & Button 1.2 Power On/Off 1.3Power
OWNER'S MANUAL MODEL: DTV-2000 STANDBY/ON CH+ CH- TABLE OF CONTENTS SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS and FEATURES ACCESSORIES and LOADING BATTERIES REMOTE CONTROL UNIT FRONT PANEL and REAR
English DMB-118HDMK3 Table of Contents Safety Information...1 System Connection...1 Remote Control...2 First Time Installation...3 Basic Operation...3 Change Channel...3 Volume and Mute...3 Subtitle/Audio
ZyCastR digi-mod HD Range digi-mod HD-1603 www.digi-modbyzycast.com HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents www.digi-modbyzycast.com Safety
Quick Start Digital Satellite Receiver Support of SD (MPEG2), DVB-S system Standard resolution video output - SCART Compatible with Diseqc 1.0, 1.1, 1.2, and USALS Electronic Program Guide - EPG Multilingual
+ + H.265 HEVC VIEWS 1 2 3 4 5 Front view: 1. Power Button Switch between operation and standby modes 2. Display current menu information and channel name etc. 3. USB Connect to the External HDD or USB
HD Digital Satellite Receiver ZDX-670 User s Manual Keep this manual for future reference II General Safety This STB has been manufactured to meet international safety standards. Please read the following
MAX S92+ HDMI SAFETY PRECAUTION The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to dangerous voltage and to prevent from a risk of electric shock.
FV400 DIGITAL TV RECEIVER WITH MODULATOR INSTRUCTION MANUAL Please read this instruction manual carefully before using your receiver Table of Contents Introduction-----------------------------------------------------------------------------
DIGITAL CABLE TV RECEIVER Set Top Box (STB) TV STAR C101 USER MANUAL 1 Table of contents Safety. 4 General Introduction.. 6 Front Panel / Rear Panel...8 Remote Control Unit.. 10 S.T.B Connection...13 Digital
Receiver/Digital Decoder DVB-T2 Set Top Box Installation Manual & User Manual SAFETY PRECAUTION CAUTION: The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert
User Manual Of Digital Set Top Box Manhattan RC-1978 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference Table of Contents Important Safety
# 5024 Digital Terrestrial Television Receiver USER S MANUAL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of insulated dangerous voltage within the
DIGITAL SET TOP BOX STB7017 INSTRUCTION MANUAL STB 7017 CHANNEL After Sales Support Now you have purchased a Tevion product you can rest assured in the knowledge that as well as your 3 year parts and labour
Digital Satellite- Meter Manual Version: 15.06.2010 Preface Preface Dear Customer, Thank you for purchasing this digital satellite meter smartmeter S10. Before operating this digital satellite meter, please
Main Features Twin Tuner HD Satellite Receiver HDMI Output (up to 1080p) DiSEqC 1.0, 1.1, 1.2, 1.3 (USALS) Compatible Dolby Digital audio output (S/PDIF) Extended EPG and program reservation on EPG Open
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNE; Please Read all of these instructions regarding
MAX S21 SAFETY PRECAUTION The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to dangerous voltage and to prevent from a risk of electric shock. Warning:
USER MANUAL 27 Full HD Widescreen LED Monitor L27ADS TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
TEST REPORT Combo Signal Analyzer Horizon HD-STM can be used intuitively, manual is not needed perfect workmanship optimized for the day-to-day work of an installer gives all the "Must-Have" informations
120531 M5-H002 Multiview T-35 DVB-T to PAL / 5 channels on all TV s Contents Multiview... 3 Features... 3 Caution... 3 Front & Rear Panel... 4 Connecting... 5 Programming... 6 Information... 7 Installation...8
User Manual HDMI Modulator Ref. 8201 & 8202 SW 1.1.1.Release No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves
Simple Media Platform Quick Installation Guide 1. Installation Instruction 1.1 Mounting unit to a 19 rack When selecting the installation site, try to comply with the following: Protective Ground - The
English What's included? English Easy Setup Guide HDMI Cable Power Adapter Power Cord External IR Cable RCU Battery RCU 1 Front Panel Idle Server Mode Left Side CI Module slot Smartcard reader slot 2 Rear
ATSC HDTV DIGITAL TERRESTRIAL SET TOP TUNER CHO4006 Compact ATSC Set Top Box User s Manual Deleted: Index Introduction.. 1 Panel... 2 Connection.. 3 Remote Controller...... 4 Software Operation.... 5-26
S7000 TV & Satellite Analyzer Key Features All standards in one: QAM(J.83A/B/C), 8VSB, DVB-T/H/T2, DVB-S/ S2 Digital/Analog TV and Satellite TV analysis MPEG2 Transport stream analyzer and monitoring via
Safety Instructions This product has been engineered and manufactured to assure your personal safety. However, improper use can result in potential electric shock or fire hazards. In order not to defeat
Evolution Digital HD Set-Top Box Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near
Jynxbox How2 for V1, V2, V3 Pg 1 Where to start Get the latest bin file that works. This may require some work but as of this writing JX_NA_Firmware_v233_dual.bin works best for V2. JX_NA_Firmware_v237_dual.bin
User guide MAW-300 Ref. 3030 HD Encoder & Modulator HDMI to DVB-T 1 Index Safety Instructions... 3 General Description... 4 Working Principie... 4 Technical Specifications... 5 Installations... 6 Typical
Johansson introduces the range of Digital Compact Headends, known as Colosseum. Already shortly after their introduction in Germany, these compact TV distribution stations were recommended by several magazines
Full HD 1080p Dual Tuner Digital HDTV Recorder, Receiver and Media Center Box QUICK START GUIDE MODEL : PHD-VRX2 Copyright 2013, PrimeDTV Technologies, Inc. Front View Menu: Display On-screen (OSD) Main
QUICK GUIDE TV / PVR CONNECTION A. Tuning QUICK GUIDE Twin Tuner PVR Recording HD Set Top Box 1. Menu, Set Up 2. Tuning i. Search Mode : Select Auto ii. Press OK to save data after scanning completed B.
freesat HD Digital Satellite Receiver The default password is 0000. FOXSAT-HD Notice Thank you for purchasing a HUMAX product. Please read this user s manual carefully to be able to safely install, use
Radio Frequency Range Installation Diagram digi-mod HD-1000DM / HD-2000DM www.resi-linx.com Single & Dual Input HD Digital DVB-T Modulators ANT IN 1 2 3 4 AUX MOD RF IN TV OUTPUTS MOD RF IN (PWR/IR PASS)
Table of Contents 1. General information... 2 1.1 Safety information.. 2 1.2 Features... 3 1.3 Unpacking... 3 1.4 General operation of the Digital Receiver... 3 1.5 Accessories..... 4 2. Controls and Functions...
MX56 T able of contents T able of contents Safety 3 5.4 System Upgrade 22 General Introduction Glossary 4 5.5 System Information 22 6 6. Playback 22 Front Panel / Rear Panel 8 6.1 Program information 22
SatKing DVBS-100HD Instruction Manual SAFETY Safety Precaution The IRD is complied with international safety standards. Please read these simple guidelines carefully before using this device. Power Supply
RFT-851FTA Twin DVB-T to PAL remodulator User Manual 1. Purpose of use RFT-851FTA is designed for prosessing two COFDM modulated signals into standard CCIR channels. RFT-851FTA is supplied with a A2 stereo/dual/swap
PLL2710W LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5 Rear View of the Product...6
USER MANUAL 21.5 Full HD Widescreen LED Monitor L215IPS TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
USER MANUAL KGNPRO19VD X P.MODE S.MODE SLEEP AUDIO 1 2 3 4 5 6 7 8 9 A/DTV USB/SD FAV + 0 SOURCE MENU OK INFO EXIT MUTE VOL CH ASPECT TTX TITLE /AUTO DVD.SETU P EPG SU BTITL E D.MENU ZOOM/REC.LIST GOTO
1 x HDMI to DVB-T (COFDM) "Home" modulator MHD101 Operation Manual MHD101 manual v1.1 1 1. IMPORTANT SAFETY PRECAUTIONS INFORMATION READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE To avoid electric
DishTV S7070r DVB-S Single tuner USB PVR Satellite Receiver User Manual Thank you for choosing this DishTV Freeview Satellite Digital Set Top Box. You will be able to receive all Freeview Satellite digital
Receptor Digital Terrestre Digital Terrestrial Receiver Instrucciones de uso User Manual Ref. 711701 Copyright, Televés, S.A. INDEX Page 1.- Precautions...........................................................................
DVB-S User s manual DVB-S Introduction 1.1 product Introduction DVB-S can implement IP data decoding and MPEG-2 A/V decoding. DVB-S can be widely used in software download, fast accessing internet, distance
TRIAX T-HD505 VA Digital terrestrial DVB-T/T2 set-top box 305060-A Contents Safety Precautions... 3 Disposal of batteries and set-top box... 4 Overview... 5 Front panel incl. CA-module and smart card...
USER MANUAL Contents Contents Safety Precautions Power Supply... 1 Installation... 2 Use and Maintenance... 3 Important Safety Instructions... 4-5 User Guidance Information Names of each part(front View)
EX AMINER Professional Radio TV, SAT & CATV Probe with IP Encap/Decap, ASI output, T.S. Analysis, HDSD SDI Output, Remote control with NMS & SNMP....Made to Measure... PROFESSIONAL SAT - TV - CATV PROBE
Quick Start Guide 1 2 It s here a New Breed of TV entertainment. Welcome to Fetch TV an exciting new television experience that puts you in control of the best TV, great movies, and popular interactive
Digital Terrestrial Television Receiver USER S MANUAL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of insulated dangerous voltage within the products
7880: A new family of TV Meters to meet the requirements of the XXI century! HEVC H.265 HEVC H.265 decoding Weights less than 3Kg DVB-C/C2 J83B DVB-T/T2 Lite Analogue TV DVB-S/S2, multistream 10 inch panoramic
USER MANUEL SNIPE 2 Ref. 0141317R13 Contents 1. General Information 1-1. Introduction 1-2. Proper use and operation 1-3. Safety notes......... 2 3 3 2. Contents 2-1. Accessory included 2-2. Name of parts......
Full HD Digital Cable Receiver (DVB-C) Digital Innovation Life User s Manual SF 918CG SE+ Difference HD Cable Receiver (DVB-C) INDEX INDEX... 3 Precautions... 5 1. Important Safety Instructions... 5 2.
CM 3S-TC 082016 Triple Transmodulator 8PSK-COFDM/QAM User manual 1 1. Accessories... 1 2. General Description... 2 3. Installing and connections... 4 3.1. Installing and general connections... 4 3.2. Installation
17 19 PROFESSIONAL LCD COLOUR MONITOR ART. 41657-41659 Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelit.eu e-mail:email@example.com WARNING: TO REDUCE THE RISK OF FIRE
PX1710M LCD Monitor USER S GUIDE www.planar.com The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright.
MyM Pro T2 Installation guide CONTENT 1. Introduction 2. Unpacking the unit 3. Connections and indications 4. IP settings 5. Menus and settings web ui 5.1 Overview menu 5.2 Input settings 5.3 Output settings
Setting up the dish: The V8 Installation Menu / V7 Main Menu Instructions for setting up Freesat V7HD or V8 Golden Adding a Satellite: V8 Satellite list / V7 Satellite Installation Menu Press the red button
TEST REPORT 该独家报道由技术专家所作 Satellite Signal Analyzer 8dtek DSM Desired includes features normally only found in much higher priced products shows constellation and spectrum handles all DiSEqC variants including
Goodmans Helpline Phone Number 0870 873 0080 contents Introduction 4 Connecting up 5 Overview diagrams 6 Getting started 8 Using the main menu 10 Troubleshooting 15 Technical Specifications 16 3 introduction
extra Terrestrial HD For Freeview HD User s Manual 1 Table of contents 1 INTRODUCTION...4 2 MAIN FUNCTIONS AND FEATURES...4 3 THE REMOTE CONTROL...5 4 FRONT AND REAR PANEL...7 4.1 FRONT PANEL... 7 5 FIRST
High Definition Digital Set Top Box with DAB+ Receiver INSTRUCTION MANUAL DFTA52DAB The Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.95 per minute) Introduction Thank you for buying
Size:120X170mm User Manual Of Digital Set Top Box VEA T100 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. Safety Instructions Always
60cm(23.6 ) LED TV WITH DVD & DVB-T INSTRUCTION MANUAL TFTV6045LEDR Contents Power Supply... 1 Installation... 2 Use and Maintenance... 3 Important Safety Instructions... 4-5 Overview(Front View) / Accessories...
DVB-T2 HD mobile digital TV Box Model:TDB15H Product Specification Version: V1.0 Date: 2014.04.28 1 Foreword Thank you for purchasing the mobile digital TV receiving box (Model No.: TDB15H) from our company.
User manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
LED LCD TV OWNER' S MANUAL MODEL: LE22T1000F LE24T1000F Please READ this manual carefully before operating your TV, and retain it for future reference Contents 1 Safety and warnings...2-3 2 Introduction...4
Digital Set Top Box User Guide Contents Quick Guide.......................... 3 Connecting to a Television..................... 3 Connecting to a Television and VCR............. 3 Introduction..........................
EN CATV & DOCSIS3.0 Meter / Analyzer Overview Introducing the H30. New from Televes, a go-to meter designed with the needs of a Cable TV operator in mind. The H30 is a light weight, rugged unit, packed
The new standard for customer entertainment TDH 800 headend system your ultimate connection 2 TRIAX TDH 800 New standard for headend systems The TDH 800 is a headend system designed to provide cost effective
EN 2 THD-2800s SUMMARY SAFETY INSTRUCTIONS... 3 GENERAL INFORMATION... 6 Connecting to Digital Receiver... 6 Front Panel Information... 6 Rear Panel Information... 6 Remote Control Unit... 6 Menu Description...
8-Way Professional Demodulator & IPTV Streamer Model: Main Feature: 8 DVB-S2/S, DVB-C, DVB-T2/T or DTMB or ATSC or ISDB-T Tuner Inputs Tuner RSSI, received signal strength, Eb/N0, C/N and BER monitoring
ALMA S-1800 FullHD DVB-S2 Satellite Receiver & Media Player Free-To Air User s Manual Read this manual before installation and use. English SAFETY INFORMATIONS TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK,
TFTV7450M 72cm(29")HD LED TV/DVD Combo Table Of Contents Important Safety Instructions...2 View of Unit...4 Front Panel... 4 Right Side Panel... 4 Rear Panel... 5 Remote Control...6 Remote Control Drawing...
1080p3 LCD TV Full High Definition LCD TV 1080p3 USER MANUAL Important Safety Precautions Important Safety Precautions 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates important instructions
HD Media HM-9001 S The HD Media HM-9001 S has a stunning array of high-end features and this latest HD receiver that supports 3G and wifi connections. The HD Media HM-9001s supports web browsing through