K & B Flame Retardant Building Riser Closures

Size: px
Start display at page:

Download "K & B Flame Retardant Building Riser Closures"

Transcription

1 K & B Flame Retardant Building Riser Closures September 1995 Issue 1,

2

3 1. General 1.1 3M Brand K&B Building Riser Closures are designed for use in building riser closets and may be positioned either horizontally or vertically. These Riser Closures may be used for new construction splices or they can be applied to an existing splice by splitting the end caps. R-3, R-5 R-6 K&B Flame Retardant Building Riser Closure End Caps SRC-3 SRC-5 SRC-7 SRC-9 R-7, R-9

4 A. Multiple Entry Closures ( Straight Inline Splices with MS2 Super-Mini Modules) Closure Dia. Closure Inside Dimensions Length Approx. Splice Bundle Capacity (Super Mini) Maximum Allowable Cable Diameter Multiple Entry End Caps Port 1 Port 2 Port 3 Optional Single Entry End Caps R-3 76 mm (3") 607 mm (24") 300 pair 24 AWG or less 30 mm (1.2") 30 mm (1.2") - 43 mm (1.7") R mm (5") 660 mm (26") 900 pair 24 AWG 51 mm (2.0") 51 mm (2.0") - 61 mm (2.4") R mm (7") 660 mm (26") 1800 pair 24 AWG 79 mm (3.1") 61 mm (2.4") 51 mm (2.0") 61 mm (2.4") R mm (9") 660 mm (26") 3000 pair 26 AWG 96 mm (3.8") 79 mm (3.1") 61 mm (2.4") 96 mm (3.8") B. 10-Port/Single Entry Closures Closure Closure Inside Dimensions Dia. Length Approx. Splice Bundle Capacity (Super-Mini) Maximum Allowable Cable Diameter Multiple Port End Cap (Ports 1-10) Single Entry End Cap R mm (3") 660 mm (24") 900 pair 24 AWG 28 mm (1.1") 84 mm (3.3") 2. Materials Supplied (R-3) 3", (R-5) 5", (R-7) 7" and (R-9) 9" Multiple Entry Kit Contents: (R-6) 10 Port/Single Entry Kit Contents: 2 closure cover halves 2 closure cover halves 2 double entry conical end caps 1 single entry conical end cap (3" and 5" Kits only) 1 10 port rubber end cap 2 triple entry conical end caps 1 4 oz., bottle of cable lubricant (7" and 9" Kits only) 2 stainless steel hose clamps 1 Flex Strip for each end cap cone 3. Additional Materials Required: Optional: Scotch Brand LR Tape - 3/4" Width Scotch Brand 25T Grounding Braid with Eyelets Scotch Brand 88T Vinyl Tape - 3/4" Width Scotchlok Brand 4460-S Shield Connectors Shield Bonding Materials (see optional list) Scotchlok Brand 4461 Shield Connectors Splicing Materials Scotchcast Brand 4465 or 4465-L Strain Relief Bars

5 4. Installation of the 3", 5", 7" and 9" Multiple Entry Closures A. New Construction (End Cap Installation Prior to Splicing) 4.01 Cut off tips of cones to be used as close as possible to the end of cone. Refer to Figure Slit cones to the approximate cable diameter. 4 slits at 90 degree intervals around the circumference of the cone are recommended. Refer to Figure 2. Figure 1 Cut off tips of cones 4.03 Slide end caps onto cables (cone end first) so they do not interfere with splicing 4.04 Bond cables and splice per standard procedure. Figure 2 - Slit cones 4.05 Position one end cap so the end of the cone is 380 m m (15") from the center of the splice. If installation is vertical, the lower end cap should be positioned first Wrap the end cap cones with at least 2 half-lapped layers of 88T Vinyl Tape. The tape should extend from the base of the cone to at least 50 mm (2") past the end of the cone to ensure good adhesion to the cable. Refer to figure Assemble the two closure body halves over splice, matting the tongue and groove seams. It is helpful to temporarily tape the body halves together in this position with a wrap around the center. Figure 3 Tape end cap onto cable 4.08 Slide closure body into end cap and fasten together with a hose clap. Refer to Figure Slide the second end cap over the closure body, secure with a hose clamp and tape to the cable as described in B. Closure Installation on Existing Splice 4.10 Cut off tips of cones to be used as close as possible to the end of cone. Refer to Figure 1. Figure 4 Slide closure body into end cap and fasten 4.11 Split the cones and end caps to be used as shown in Figure Cut three additional slits at 90 degree intervals around the circumference of the cone. These slits should be to the approximate cable diameter. Note: This is an addition to the cut described above. Refer to Figure 5. Figure 5 Split the cones and end caps

6 4.13 Place the end caps on the cables. Position one end cap so the end of the cone is 380 mm (15") from the center of the splice. If the installation is vertical, the lower end cap should be positioned first Hold end cap in place by taping the cone ends of the positioned end cap to the cable with 1-2 wraps of 88T Vinyl Tape. Refer to Figure 6. Figure 6 Taping the ends and installing Clex Strip 4.15 Cut Flex Strip to proper length and place in cut (narrow leg outside). Refer to Figure Wrap entire shoulder area of cap with 2 layers of highly stretched LR Tape. Refer to Figure 7. Note: Vinyl tape is NOT recommended for wrapping shoulder area. Figure 7 Wrap should of end cap 4.17 Wrap the end cap cones with at least 2 half-lapped layers of 88T Vinyl Tape. The tape layers should extend from the base of the cone to a minimum of 50 mm (2") onto the cable sheath Place the two closure body halves over the splice and assemble. It is helpful to temporarily tape the body halves together in this position with a wrap around the center Slide the closure into the taped end cap and fasten the two together with a hose clamp Slide the second end cap over the closure body, tape as described in steps 4.14 through 4.17 and secure with a hose clamp. Refer to Figure 8. Figure 8 - Completed Installation

7 5. Installation of the 10 Port/Single Entry Closure Note: This closure is intended to be installed on new construction only Place the single entry tapered end cap on the cable as described in steps 4/01 through Insert a stub cable into one of the ports of the 10 port cap as far as it will go without forcing it Cut the rubber nipple approximately 20 mm (3/4") smaller than the position determined in Repeat with each stub toe spliced. Refer to Figure Remove sheath and shield of stub cable exposing enough free conductor length for splicing. Leave core wrap in place to protect conductors during presplicing set up. Figure 9 Cut rubber nipple 20 mm (3/4") smaller 5.05 Place tape around end of core wrap on each cable to avoid splits and to aid in passing cable ends through end cap openings. Wrap a temporary layer of 88T Vinyl Tape around the exposed aluminum shield. This prevents damage to the internal tapered nipple of the multiple end cap when the stub cables are pulled through Apply cable lubricant to the sheath and inside of end cap nipples. Pass cable ends through end cap openings so that cable sheaths extend 25 mm (1") beyond nipple end. If several cables are to enter the multiple end cap, start with the back port and work toward the front Bond cables and splice per standard procedure Place the two closure body halves over the splice and assemble. It is helpful to temporarily tape the body halves together with a wrap around the center Slide the closure body into the rubber end cap and secure with a hose clamp Slide the single end cap over the open end of the closure body and fasten with a hose clamp. Refer to Figure 10. Figure 10 - Installed closure 5.11 Wrap the single entry end cap cone with at least 2 half-lapped layers of 88T Vinyl Tape. The tape must extend from the base of the cone to at least 50 mm (2") past the end of the cone to ensure good adhesion to the cable.

8 Important Notice All statements, technical information and recommendations related to the Seller's products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use. Any statements or recommendations of the Seller which are not contained in the Seller's current publications shall have no force or effect unless contained in an agreement signed by an authorized officer of the Seller. The statements contained herein are made in lieu of all warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed. SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS THAT WERE DEFECTIVE. Telecom Systems Division 6801 River Place Blvd. Austin, TX / Recycled paper 40% pre-consumer 10% post-consumer Printed in USA 3M

3M Better Buried Closures

3M Better Buried Closures 3M Better Buried Closures Instructions March 2016 78-0015-2945-8-A Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Closure Selection Guide... 4 4.0 LHS End Cap Installation... 5 5.0 Cable Preparations...

More information

3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462-FN and 3M High Gel Re-enterable Encapsulant 8882)

3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462-FN and 3M High Gel Re-enterable Encapsulant 8882) 3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462FN and 3M High Gel Reenterable Encapsulant 8882) Instructions April 2016 78813509979C Contents: 1.0 General... 1 2.0 Kit Contents...

More information

3M Better Buried Compound Compression Closure System

3M Better Buried Compound Compression Closure System 3M Better Buried Compound Compression Closure System Instructions March 2016 78-0015-2948-2-A Contents: 1.0 General...3 2.0 Kit Contents...3 3.0 Closure Selection Guide...4 4.0 LHS End Cap Installation...5

More information

HSK Mine and Portable Cable Splice

HSK Mine and Portable Cable Splice 8096-4-HSK Mine and Portable Cable Splice Instructions 5 and 8 kv rated cables; Type SHD-GC Size 2/0 4/0 (connector max. length 2 1/2") 8096-4-HSK Mine and Portable Cable Splice 78-8119-6296-4-A 1 1.0

More information

3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series

3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series 3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series Instructions Voltage Rating: 1000 V, Temperature Rating: 90 C Kit Contents 78-R1 78-R2 78-R3 78-R4 78-R5 Sleeve Set 1 1 1 1

More information

2178-L/S Series Fiber Optic Splice Case with Gasket

2178-L/S Series Fiber Optic Splice Case with Gasket 2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents

More information

3 SLiC Aerial Closure with Rubber End Seal

3 SLiC Aerial Closure with Rubber End Seal 3 Aerial Closure with Rubber End Seal Instructions 1.0 General 1.1 This instruction bulletin describes the assembly of the 3M Aerial Closure with external bonding hanger brackets. These closures are suitable

More information

2178 Fiber Optic Splice Case and 2181 Cable Addition Kit

2178 Fiber Optic Splice Case and 2181 Cable Addition Kit 2178 Fiber Optic Splice Case and 2181 Cable Addition Kit Instructions January 1994 Issue 1, 34-7029-6387-6 1 2 Contents: 1.0 General... 4 2.0 Specifications... 4 3.0 Kit Contents... 5 SECTION 1: 2178 Splice

More information

3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket

3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket For use with 3M SLiC Free-Breathing Fiber Optic Closures and Terminals Instructions November

More information

2178 L/S Series Fiber Optic Splice Cases and Accessories

2178 L/S Series Fiber Optic Splice Cases and Accessories 2178 L/S Series Fiber Optic Splice Cases and Accessories The 3M 2178 Fiber Optic Splice Case family has always given you great protection for fiber optic connections. Now, the addition of 3M 2178-L/S Series

More information

Quick Term II Silicone Rubber Termination Kits for Shielded Cables Instruction Sheet

Quick Term II Silicone Rubber Termination Kits for Shielded Cables Instruction Sheet Quick Term II Silicone Rubber Termination Kits for Shielded Cables Instruction Sheet Tape Shield Wire Shield UniShield UniShield is a registered trademark of Cablec Corporation Kit No. 5696K 5697K Cable

More information

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions September 2017 78-8130-5055-2-M 2 September 2017 78-8130-5055-2-M 1.0 Kit Contents 2.0 General...

More information

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR 3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions July 2010 3 1.0 Contents 1.0 General...3 2.0 Kit Contents...3 3.0 Cable Preparation...4 4.0

More information

3M Distribution Box (DDB)

3M Distribution Box (DDB) 3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure

More information

3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR

3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR 3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR Instructions July 2010 78-8135-0094-5-K 3 1.0 General 1.1 3M Fiber Optic Splice Closure 2178-XSB The

More information

3M Scotchcast Flexible Power Cable Splice Kits 82-F Series

3M Scotchcast Flexible Power Cable Splice Kits 82-F Series 3M Scotchcast Flexible Power Cable Splice Kits 82-F Series For use in weather-exposed, direct burial or submerged locations. For making in-line splices on non-shielded portable power cables and cords rated

More information

3M Cold Shrink Foldback Splice Jacket Kit

3M Cold Shrink Foldback Splice Jacket Kit 3M Cold Shrink Foldback Splice Jacket Kit SJ-FB Instructions! CAUTION Working around energized systems may cause serious injury or death. Installation should be performed by personnel familiar with good

More information

3M Scotchcast Mine and Portable Cable Splice and Jacket Repair Kit M-40

3M Scotchcast Mine and Portable Cable Splice and Jacket Repair Kit M-40 3M Scotchcast Mine and Portable Cable Splice and Jacket Repair Kit M-40 Instructions 1 & 2 For Jacket Repair (pages 2 & 7) Supplemental Instructions for: Insulation Repair (page 12) Conductor Repair (page

More information

Instructions. Cable with Armor F CAUTION. October Rev A

Instructions. Cable with Armor F CAUTION. October Rev A 3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables

More information

SLiC Fiber Aerial Closure System

SLiC Fiber Aerial Closure System 3 SLiC Fiber Aerial Closure System SLFC 533-SP SLFC 533-TS SLFC 733-SP Instructions May 2005 78-8135-4502-3-B N C H E S R A N G E M IL L IM E T E R S.4 10.6.8 A B C 15 20 I 1.0 Kit Contents Note: Examine

More information

3 Foam Sealed Closure 2" (50 mm) with Compound Compression

3 Foam Sealed Closure 2 (50 mm) with Compound Compression 3 Foam Sealed Closure 2" (50 mm) with Compound Compression Instructions 1.0 General 1.1 The 3M Foam Sealed Closure is designed to be used in the construction and maintenance of buried and underground PIC

More information

3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT

3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT 3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT For Tape Over Wire (TOW) and Wire-Over-Tape (WOT) Shielded Cable For 250 2000 kcmil cable with 650-mil primary insulation thickness Instructions

More information

3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334

3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 for 5/8 kv Non-Shielded and Shielded Cables (Ribbon, Wire and UniShield Cables) Instructions Cable Size Range: Feeder: #8 AWG 500 kcmil Motor Lead: #10

More information

Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL

Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std. 404 35 kv Class 250 kv BIL Kit Number 5798A-MT Cable Range Requirements Cable Insulation O.D.

More information

3M Cold Shrink Splice Kit QS-III 5416A

3M Cold Shrink Splice Kit QS-III 5416A 3M Cold Shrink Splice Kit QS-III 5416A for Jacketed Concentric Neutral (JCN) and Concentric Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized systems may

More information

18mm ECAM Cable Entry Port

18mm ECAM Cable Entry Port 18mm ECAM Cable Entry Port Instructions October 2006 1.0 Introduction The 3M 18mm ECAM (External Cable Assembly Module) Cable Entry Port Kit is designed to accept fiber optic cables with external diameters

More information

3M Coupling Tray FDTC-10S-COUPLINGTRAY

3M Coupling Tray FDTC-10S-COUPLINGTRAY 3M Coupling Tray FDTC-10S-COUPLINGTRAY for use with 3M Fiber Dome Closures FDC 10S Instructions July 2010 3 1.0 Introduction The 3M Coupling Tray FDTC-10S-COUPLINGTRAY can accommodate up to 10 loose tubes.

More information

Crimplok. Connectors. 3M Crimplok ST* Connector Multimode 1. 3M Crimplok SC Connector Single-mode 2

Crimplok. Connectors. 3M Crimplok ST* Connector Multimode 1. 3M Crimplok SC Connector Single-mode 2 3 Crimplok Connectors Quick, easy installation and superior performance To successfully design, install or operate today s fiber optic networks, you need components that offer speed and reliability from

More information

3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter

3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter 3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter Instructions January 2010 3 1.0 General 1.1 The 3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter(s) protects, organizes and stores

More information

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized

More information

3M Cold Shrink Splice Kit QS-III 5514A

3M Cold Shrink Splice Kit QS-III 5514A 3M Cold Shrink Splice Kit QS-III 5514A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric

More information

3M Cold Shrink Rubber Splicing Kit 5552

3M Cold Shrink Rubber Splicing Kit 5552 3M Cold Shrink Rubber Splicing Kit 5552 for 5/8 kv Shielded to Shielded or Shielded to Non-Shielded Cables Instructions IEEE Std. No. 404 5 kv Class, 75 kv BIL 8 kv Class, 95 kv BIL! CAUTION Working around

More information

3M Cold Shrink Splice Kit QS-III 5515A

3M Cold Shrink Splice Kit QS-III 5515A 3M Cold Shrink Splice Kit QS-III 5515A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric

More information

Scotch Heavy Duty Vinyl Electrical Tape 22

Scotch Heavy Duty Vinyl Electrical Tape 22 Scotch Heavy Duty Vinyl Electrical Tape 22 Data Sheet July 2015 Description Agency Approvals & Self Certifications Scotch Heavy Duty Vinyl Electrical Tape 22 is a premium grade, 10-mil thick, vinyl insulating

More information

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN 3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-500-1000 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around

More information

3M Fiber Optic Splice Closure 2178-L/S Series with Gasket

3M Fiber Optic Splice Closure 2178-L/S Series with Gasket 3M Fiber Optic Splice Closure 2178-L/S Series with Gasket Instructions for: 3M Fiber Optic Splice Closures 2178-L/S Series 3M Flame Retardant Fiber Optic Splice Closures 2178-L/S/FR 3M Cable Addition Kit

More information

3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS

3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS 3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS-350-1000 for Tape Shield, Wire Shield, UniShield, and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION

More information

3M Cold Shrink QS-III Splice Kit 5467A(S)-WF

3M Cold Shrink QS-III Splice Kit 5467A(S)-WF 3M Cold Shrink QS-III Splice Kit 5467A(S)-WF for Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION Working around energized systems may cause serious injury

More information

Communication Markets Division 3M Scotchlok Connectors and Tools. Proven. Solutions for. Today s Applications

Communication Markets Division 3M Scotchlok Connectors and Tools. Proven. Solutions for. Today s Applications Communication Markets Division 3M Scotchlok Connectors and Tools Proven Solutions for Today s Applications A Proven Series of Tools and Connectors from 3M. 50 years ago, 3M introduced the industry s original

More information

27mm ECAM Double Cable Entry Port

27mm ECAM Double Cable Entry Port 27mm ECAM Double Cable Entry Port Instructions October 2006 1.0 Introduction The 3M 27mm ECAM Double Cable (External Cable Assembly Module) Entry Port is designed to accept fiber optic loose tube & central

More information

Scotchlok Connectors and Tools

Scotchlok Connectors and Tools Scotchlok Connectors and Tools Proven Solutions For Today s Applications A New Series of Tools and Connectors from 3M. Over 45 years ago, 3M introduced the industry s original insulation displacement connector

More information

Built tough for long-term connections

Built tough for long-term connections Communication Markets Division 3M Scotchlok Connectors Built tough for long-term connections 2 3 Durable, insulated connections on the first crimp. Over 50 years ago, 3M introduced the industry s original

More information

Built tough for long-term connections

Built tough for long-term connections Communication Markets Division 3M Scotchlok Connectors Built tough for long-term connections 2 3 Durable, insulated connections on the first crimp. Over 50 years ago, 3M introduced the industry s original

More information

2179-CD Series Fiber Optic Splice Closure. Installation Instructions

2179-CD Series Fiber Optic Splice Closure. Installation Instructions 2179-CD Series Fiber Optic Splice Closure Installation Instructions 1.0 Product Introduction The new 3M TM 2179-CD Series Fiber Optic Splice Closure can be used in buried, underground, aerial, and pedestal

More information

F CAUTION. Jacketed Concentric Neutral (JCN) Cable. Concentric Neutral (CN) Cable. IEEE Std. No. 48 Class 1 Termination 15 kv Class 110 kv BIL

F CAUTION. Jacketed Concentric Neutral (JCN) Cable. Concentric Neutral (CN) Cable. IEEE Std. No. 48 Class 1 Termination 15 kv Class 110 kv BIL 3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief 7642-S-2 For Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) Cable Instructions IEEE Std. No. 48 Class

More information

Cabinet Tools and Accessories Ordering Guide

Cabinet Tools and Accessories Ordering Guide 3 Cabinet Tools and Accessories Ordering Guide 3M Cabinet Tools and Accessories 3M 4320 Block Spare Parts Replacement Cap Kit 100 Tan + 100 Orange 1/cs. 1/cs. 054007-63793 Half-tap, feed through 100 Tan

More information

3M Locator Plate N

3M Locator Plate N M Locator Plate 44-107N Instructions for the assembly of.100 x.100 preassembled socket connectors 1.0 General The M Locator Plate 44-107N is designed to aid in the assembly of the preassembled socket connector

More information

FOSC 450 C6 and D6 Closures

FOSC 450 C6 and D6 Closures FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel

More information

Solutions for Electronic Specialty Markets (ESM)

Solutions for Electronic Specialty Markets (ESM) 3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product

More information

SLiC Fiber Aerial Closure 533 and 733

SLiC Fiber Aerial Closure 533 and 733 SLiC Fiber Aerial Closure 533 and 733 3M s SLiC fiber aerial closures are designed to enable service providers to costeffectively deploy aerial fiber networks in the access network (FTTN, HFC, and FTTP).

More information

Instruction Guide February 2017

Instruction Guide February 2017 Instruction Guide February 2017 3M Instruction Guide: 3M TM Locator Plate 3443-81-XX, 3D-Printed Instructions for the assembly of 3M TM Ribbon Cable Wiremount Socket Assembly, 451 Series 1.0 General 1.1

More information

Cold Shrink Silicone Rubber Termination QT-II

Cold Shrink Silicone Rubber Termination QT-II 3 Cold Shrink Silicone Rubber Termination QT-II Instructions IEEE Std. No. 48-1990 Class 1 Termination 15 Class 110 kv BIL Kit Contents: 1 Hi-K Silicone Rubber Termination 2 Scotch Silicone Rubber Tape

More information

3M 8900 Single-mode SC Crimplok Connector

3M 8900 Single-mode SC Crimplok Connector 3M 8900 Single-mode SC Crimplok Connector Technical Report June 1999 80-6110-1441-8 1 1.0 Product Description & Requirements The 3M SC Single-mode Crimplok Connector is designed to provide the customer

More information

Quick Term II. Cold Shrink Silicone Rubber Termination (With High-K Stress Relief) Instruction Sheet. Quick Term II. Silicone Rubber Termination Kits

Quick Term II. Cold Shrink Silicone Rubber Termination (With High-K Stress Relief) Instruction Sheet. Quick Term II. Silicone Rubber Termination Kits Quick Term II Cold Shrink Silicone Rubber Termination (With High-K Stress Relief) Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 15 kv Class 110 kv BIL Kit Contents: 3 Hi K Silicone Rubber

More information

Installation instructions Roxtec RM ES

Installation instructions Roxtec RM ES Installation instructions Roxtec RM ES Environmental side Environmental side Pipe Cable screen/armor Layers Layers Cable sheath Vertical screen Plastic film Conductive tape Integrated environmental sealing

More information

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-2-4/0

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-2-4/0 3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-2-4/0 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around energized

More information

3M Sensored Termination (15 kv) QX-T15I-vi1-E

3M Sensored Termination (15 kv) QX-T15I-vi1-E 3M Sensored Termination () QX-T15I-vi1-E Data Sheet May 2016 Kit Contents: Each kit contains sufficient quantities of the following materials to make three single-phase terminations. 31" (REF) One piece

More information

3M No Polish Jacketed SC/APC Connector

3M No Polish Jacketed SC/APC Connector Communication Markets Division 3M No Polish Jacketed SC/APC Connector For use with 1.6 to 3.0 mm Jacketed Cable 3M No Polish SC/APC Connector enables fast, on-site termination of 1.6 mm to 3.0 mm jacketed

More information

3M Fiber Optic Closure System LL

3M Fiber Optic Closure System LL 3M Fiber Optic Closure System LL 3M Fiber Optic Closure System The 3M Fiber Optic Closure System LL provides a protective yet accessible environment for housing single or mass fusion fiber splices. The

More information

Installation instructions Roxtec RM PE

Installation instructions Roxtec RM PE Installation instructions Roxtec RM PE Environmental side Environmental side Pipe Cable screen/armor Layers Layers Cable sheath Plastic film Conductive tape Integrated environmental sealing system for

More information

4320 SS-25 Self-Strip Terminating Block

4320 SS-25 Self-Strip Terminating Block 4320 SS-25 Self-Strip Terminating Block Instructions May 2002 78-8130-7677-1 1.0 General The 3M 4320 SS-25 Self-Strip Terminating Block is a factory stubbed, self-stripping connecting block designed for

More information

Installation instructions Roxtec RM ES B

Installation instructions Roxtec RM ES B Installation instructions Roxtec RM ES B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Vertical screen Plastic

More information

FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N

FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General

More information

Industrial Loadbreak Elbow

Industrial Loadbreak Elbow Industrial Loadbreak Elbow 200 A 5, 8, and 15 kvclass 5810 Series Installation Instructions 1.0 General The 3M Industrial Loadbreak Elbow connector is a fullyshielded and insulated plug-in termination

More information

3M Pressurized Closure System 2-Type 505

3M Pressurized Closure System 2-Type 505 Communication Markets Division 3M Pressurized Closure System 2-Type 505 The 3M Pressurized Closure System 2-Type 505 is a complete, pressuretight, re-enterable closure system for enclosing spliced connections

More information

Installation instructions Roxtec RM PE B

Installation instructions Roxtec RM PE B Installation instructions Roxtec RM PE B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Plastic film Conductive

More information

Cold Shrink Straight Joint

Cold Shrink Straight Joint Cold Shrink Straight Joint 3M QS2000E 22 kv Single Core Straight Joint Instruction Sheet All dimensions shown are in mm unless otherwise stated Kits contains components for one single core cable -2-2*

More information

Coaxial Cable Feedline Choke Kit - 50 Ω

Coaxial Cable Feedline Choke Kit - 50 Ω Coaxial Cable Feedline Choke Kit - 50 Ω COM-CFC-50K COM-CFC-50K-INS-Revision 2a COMTEK SYSTEMS 2013 P.O. Box 1491 - Akron, OH 44309-1491 USA Phone: (800) 777-0703 Technical Support and International: (330)

More information

3M Cold Shrink QS4 Integrated Splice Kit QS4-15SP-2-4/0

3M Cold Shrink QS4 Integrated Splice Kit QS4-15SP-2-4/0 3M Cold Shrink QS4 Integrated Splice Kit QS4-15SP-2-4/0 for Jacketed Concentric Neutral (JCN), Flat Strap, Tape Shield and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 15 kv Class 150

More information

3M No Polish Jacketed SC/APC Connector

3M No Polish Jacketed SC/APC Connector Communication Markets Division 3M No Polish Jacketed SC/APC Connector For use with 1.6 to 3.0 mm Jacketed Cable 3M No Polish SC/APC Connector enables fast, on-site termination of 1.6 mm to 3.0 mm jacketed

More information

3M Merchandising Catalog. Unrivaled. Product Presence to. Meet Your Merchandising Needs

3M Merchandising Catalog. Unrivaled. Product Presence to. Meet Your Merchandising Needs 3M Merchandising Catalog Unrivaled Product Presence to Meet Your Merchandising Needs 1 Table of Contents Gondolas...3-5 Shelves...6-7 Racks...8-10 Portable Labeler Displays...11-14 Terminals Displays...15-17

More information

Quante BPEO Splice-Protection Closure for Optical Fiber Cables. Features Advantages Benefits

Quante BPEO Splice-Protection Closure for Optical Fiber Cables. Features Advantages Benefits 3 Quante BPEO Splice-Protection Closure for Optical Fiber Cables BPEO: Fully Mechanical, Easy to Install, No Specific Tools BPEO is the newest generation of watertight spliceprotection closures for optical

More information

FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays

FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and

More information

3M New Construction Cross-Connect Cabinets. The. Commitment. Your Copper Requires

3M New Construction Cross-Connect Cabinets. The. Commitment. Your Copper Requires 3M New Construction Cross-Connect Cabinets Commitment The Your Copper Requires 3M. A pioneer. A partner. Copper is the foundation of your distribution network, now and for the foreseeable future. It s

More information

High Density Block BRCP. HD BRCP- 128/192/256 pair. Installation Instructions

High Density Block BRCP. HD BRCP- 128/192/256 pair. Installation Instructions High Density Block BRCP HD BRCP- 128/192/256 pair Installation Instructions Product Introduction The BRCP block is the latest generation of MDF terminal blocks developed by 3M, specifically designed for

More information

3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE 3M Junction Box (JBOX)

3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE 3M Junction Box (JBOX) 3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE 3M Junction Box (JBOX) In-cabinet and Outdoor AC Power Junction Box (JBOX) for 3M Cross-Connect Cabinets with DSLAM apparatus cases installed Instructions

More information

Installation instructions Roxtec RM BG systems

Installation instructions Roxtec RM BG systems Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be

More information

3M Slim Lock Closures

3M Slim Lock Closures 3M Health Care 3M Slim Lock Closures 3M Tower Weatherproofing Solutions Sesh Natarajan 3M Health Care 3M Tower Weatherproofing Solutions Market trend towards denser RF connectors on tower equipment Macro

More information

Installation instructions Roxtec RM ES systems

Installation instructions Roxtec RM ES systems Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be

More information

Installation instructions Roxtec RM BG B systems

Installation instructions Roxtec RM BG B systems Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be

More information

Installation instructions Roxtec CF 16 EMC and Roxtec CF 16 O EMC

Installation instructions Roxtec CF 16 EMC and Roxtec CF 16 O EMC Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be

More information

3M Super 23 Electrical Tape

3M Super 23 Electrical Tape WEATHERPROOFING S CHEMICALS ET 3M SUPER 23 Features: Premium all-weather black electrical tape Remains conformable at -18 C /0 F 7mm thickness UV resistant Part # Size ET 3M Super 23 19mm x 9.15m WEATHERPROOFING

More information

Medium Box for Cable Termination

Medium Box for Cable Termination FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling

More information

3M Fiber Closures BPEO

3M Fiber Closures BPEO 3M Fiber Closures BPEO 2 3M Fiber Closures BPEO The 3M Fiber Closures BPEO are designed with flexibility in application in mind. With a range of sizes, they can be deployed above grade (pole, facade) or

More information

Communication Markets Division. 3M Fiber Closures. Smart design makes your job easier.

Communication Markets Division. 3M Fiber Closures. Smart design makes your job easier. Communication Markets Division 3M Fiber Closures Smart design makes your job easier. 2 Your connections deserve the best protection. No matter the size and configuration of your network, protecting its

More information

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit 3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief For Jacketed Concentric Neutral (JCN) Cable and Concentric Neutral (CN) Cable 7652-S-4, 7652-S-4 (L), 7653-S-4, 7654-S-4,

More information

Installation instructions Roxtec CM PE systems

Installation instructions Roxtec CM PE systems Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be

More information

3M Fiber Optic Wall Mount Enclosure 8430 Series

3M Fiber Optic Wall Mount Enclosure 8430 Series 3M Fiber Optic Wall Mount Enclosure 8430 Series Installation Instructions January 2014 3 78-0013-9429-1-A Table of Contents 1.0 Description...3 2.0 Parts...4 3.0 Assembly...4 4.0 Mounting the Enclosure...6

More information

FOSC-450D. Fiber Optic Splice Closure. 1 Introduction. Content. 5 Cable termination. 6 Fiber routing. 2 General. 7 Installation of the gel block

FOSC-450D. Fiber Optic Splice Closure. 1 Introduction. Content. 5 Cable termination. 6 Fiber routing. 2 General. 7 Installation of the gel block FOSC-450D I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories 2.4 Capacity 3 Preparation of the closure 4

More information

SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1

SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1 Fiber Optic Splice Closure 1. Introduction 1.1 General SAMJIN s SJOF-BS604B protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct buried

More information

Weatherproofing Coaxial Cable Connections

Weatherproofing Coaxial Cable Connections Weatherproofing Coaxial Cable Connections DXE-TECHTIP-WPCC Rev 3 DX Engineering 2015 1200 Southeast Ave. - Tallmadge, OH 44278 Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax:

More information

3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Skirt and Stabilizers

3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Skirt and Stabilizers 3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Skirt and Stabilizers Rear skirt and stabilizers to cover and protect DSLAM apparatus cases mounted directly on 3M Pad or Stake Mount Cabinets Instructions

More information

COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x cm cm x cm)

COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0 x 22 8.5 x 22 (15.24 cm x cm cm x cm) OCTOBER 2004 COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x 55.88 cm 21.59 cm x 55.88 cm) Be sure to read and completely understand this procedure before applying

More information

3M 710 Splicing System. Modular. Solutions. for Copper Splicing

3M 710 Splicing System. Modular. Solutions. for Copper Splicing 3M 710 Splicing System Modular Solutions for Copper Splicing A History of Strong Copper Networks The reliability of a copper conductor communication system depends greatly upon the reliability of the individual

More information

DXE-UT-808X Coaxial Cable Stripping Tool

DXE-UT-808X Coaxial Cable Stripping Tool DXE-UT-808X Coaxial Cable Stripping Tool DXE-UT-808X-INS-Revision 3b DX Engineering 2012 P.O. Box 1491 Akron, OH 44309-1491 USA Phone: (800) 777-0703 Technical Support and International: (330) 572-3200

More information

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24

More information

Instructions for Use of Overlap Seam Repair Kit:

Instructions for Use of Overlap Seam Repair Kit: Instructions for Use of Overlap Seam Repair Kit: 3M has assembled a field repair kit to adhesively re-attach delaminated overlap seams on trailers or truck body sidewalls. If the overlap seams were previously

More information

COOPER POWER SERIES. 600 A 15/25 kv class DT625 T-body installation and cable preparation instructions. Deadbreak Apparatus Connectors MN650017EN

COOPER POWER SERIES. 600 A 15/25 kv class DT625 T-body installation and cable preparation instructions. Deadbreak Apparatus Connectors MN650017EN Deadbreak Apparatus Connectors MN650017EN Effective January 2016 Supersedes S600-46-2 July 2014 COOPER POWER SERIES 600 A 15/25 kv class DT625 T-body installation and cable preparation instructions DISCLAIMER

More information

Installation instructions Cable transit device Roxtec RS ES Ex

Installation instructions Cable transit device Roxtec RS ES Ex General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14

More information

HCS - HES Cabling Systems

HCS - HES Cabling Systems HCS - HES Cabling Systems Installation Manual for HCS High-Capacity Fiber-Optic Rack-Mount Cabinets Be sure to read and completely understand this procedure before applying product. Be sure to select the

More information