To meet 1000 kg walk-over resistance requirements, cement must support 100% of the exterior surfaces of the blockout. 2

Size: px

Start display at page:

Download "To meet 1000 kg walk-over resistance requirements, cement must support 100% of the exterior surfaces of the blockout. 2"

Poppy Ramsey
6 years ago
Views:

1 WHIT & STTI OLORS lient Project name Order# Type Qty TURS N NITS Physical : luminum optical chamber housing nodized aluminum flush trim Polymer recycled PV blockout housing reinforced with a stainless steel frame vailable in 1', 2', 3' or 4' sections ie cast aluminum end caps Stainless steel hardware Tempered glass lens symmetric wallwash, 8 x 8, 10 x 10, 10 x 30, 10 x 60, 10 x 90, 15 x 25, 30 x 30, 30 x 60, 35 x 35, 50 x 80, 60 x 60, 80 x 80, or 90 x 90 optics 0, 2.5, 5 or 20 factory-set optical aiming options (not available for asymmetric wallwash) IP68 rated for up to 1' (30cm), not suitable for permanent immersion applications IK10 rated Walk-over compliant up to 500 kg, self-supported; walk-over compliant up to 1000 kg, concrete-supported 1 Performance : 2200K, 2700K, 3000K, 3500K, 4000K, Red, Green, lue static colors available RI value: 80+ Minimum 1fc ( ft (29m) distance (HO 4000K, 4' unit, 10 x 60 optic, 2.5 tilt setting) Lumen maintenance: 80,000 hrs 25 ] Lumen maintenance: 60,000 hrs 50 ] Lumen measurements comply with LM standard Resolution per foot or per fixture (configured with LumenI V3 software & MX/RM) Operating temperatures: -40 to 50 [-40 to 122] lectrical : Line voltage luminaire for 100 to 277V Power and data in 1 cable (#16-5) IP68 push-lock connectors 5W/ft version meets SHR standards for linear lighting on building facades 2 8.5W/ft Regular Output version W/ft High Output version 2 imming options: Lumentalk, 0-10 volt, LI, Lutron cosystem or MX/RM enabled Width of glass lens " [58mm] 4ft HO 4000K, 0º tilt setting IK10 Photometric Summary elivered Output [lm] Intensity [peak cd] WW 2,770* 4,766* 8ºx8º 4,512* 59,238* 10ºx10º 10ºx30º 10ºx60º 3,908 4,586* 3,876* 35,109 25,296* 12,062* 10ºx90º 4,178* 6,210* 30ºx30º 4,686* 16,886* 30ºx60º 60ºx60º 4,035 3,845 5,317 3,062 90ºx90º 4,070* 2,132* Photometric performance is measured in compliance with ISN LM *stimated. onsult Lumenpulse website for the latest IS and LT files. TOP VIW ", ", ", " [331mm, 636mm, 941mm, 1245mm] " [113mm] RONT VIW *ll dimensions are preliminary SI VIW 1 To meet 1000 kg walk-over resistance requirements, cement must support 100% of the exterior surfaces of the blockout. 2 SHR version not available for 1 fixture lengths. Power consumption is typically 20% higher for 1' fixture lengths " [141mm] " [215mm] STION TIL Optical chamber Power supply housing 1/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

2 OPTIL HMR ORINTTION WHIT & STTI OLORS Key holes toward the wall side (or target to light). rosted section of lens toward the wall side. Wall side 0 Street side Lumenpulse logo always readable from the street side. 2/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

3 SSORIS Order separately, refer to each item s specification sheet for ordering information WHIT & STTI OLORS ontrol Systems: ontrol oxes: LTO2 LU LI LI-LT LTN X Lumentouch is a wall mount MX 512 controller keypad. Lumencue is a US / mini S MX 512 controller. LumenI is a diagnostic and addressing MX 512 controller. It must be specifi ed on all MX applications. Refer to LI specifi cation sheet for details. LumentalkI is a diagnostic and addressing controller. It must be specifi ed for all Lumentalk (LT) applications. Refer to LI-LT specifi cation sheet for details. Lumentone is a simple pre-programmed MX 512 controller with a push button rotary dial and live feedback. MX/RM control box. Up to six power and data outputs to fi xtures or fi xture runs. thernet enabled option. Refer to X specifi cation sheet for details. 3/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

4 SSORIS - continued Order separately, refer to each item s specification sheet for ordering information WHIT & STTI OLORS ables: LOIL- - LOIJ- - Leader able for Lumenfacade Inground. Please specify certification (UL or ), cable length (10', 25' or 50' [3m, 7.6m or 15.2m] standard). Suitable for data applications. Sealing endcap is mandatory for any unused connector. (1) included with every leader cable. onsult Lumenfacade Inground leader cable specifiation sheet for details. Jumper able for Lumenfacade Inground. Please specify certification (UL or ) and cable length (2', 4' or 10' [0.6m, 1.2m or 3m] standard). Suitable for data applications. onsult Lumenfacade Inground jumper cable specifiation sheet for details. Jumper able Length Selection (4 ft LOI shown) TOP VIW distance between two fixtures x: 0.5 ft [0.15m] () length of fixture (L) dd the length of one fixture to the distance between two fixtures: L +. x: L + = 4.5ft [1.4m] Order the next longest jumper cable available: 2, 4 or 10 [0.6m, 1.2m or 3m] Therefore 10 [3m] jumper cable required Inground Junction ox (optional): Lumenfacade Inground IP68 sealed junction box starter kit - LOI-JOX order code. *Use for stand alone fixtures and/or first of run fixtures *LOI-JOX accessory does not fit in 1ft fixtures. 4/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

5 TYPIL WIRING IGRMS Typical Installation with Leader able WHIT & STTI OLORS - Leader cable (LOIL, order separately) - POX - Optical chamber - lockout - onduit (y others) - Jumper cable to next fixture (LOIJ) (or daisy-chain installation, order separately) TOP VIW Typical Installation with IP68 LOI-JOX ccessory annot be used with 1ft LOI fixture - Power & data input cable (by others) - LOI-JOX (order separately) - POX - Optical chamber - lockout - onduit (by others) G - Jumper cable to next fixture (LOIJ) (or daisy-chain installation, order separately) TOP VIW G 5/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

6 TYPIL WIRING IGRMS - continued Wiring olor ode WHIT & STTI OLORS merican olor ode olor ode US Green Yellow/Green Ground lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange Grey 0-10V / ata - Non-imming (NO) - Power input ( V) - Jumper cable (LOIJ) - Lumenfacade Inground (LOI-NO) - IP68 LOI-JOX - POX STION VIW Wiring etail using LOI-JOX ccessory - Non-imming (NO) - Power input ( V) - ap - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. Lumentalk (LT) 1% minimum dimming value G H - Third party dimmer/controller - Lumentranslator (LTL-010, -MX, -TRI, -LI) - ata wiring (by others) - Power line ( V ) - Jumper cable (LOIJ) - Lumenfacade Inground (LOI-LT) G - IP68 LOI-JOX accessory (optional) H - POX STION VIW Wiring etail using LOI-JOX ccessory - Lumentalk (LT) - Power input ( V) - ap - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. Lumentalk enabled fixtures must be commissioned using LumentalkI software and a LI-LT. onsult factory for details. Maximum of 1 transmitter (Lumentranslator or Lumenlink) per system. No third party fixtures allowed on the same circuit. or MX applications: 1 MX controller per Lumentalk network, maximum of 48 MX channels per Lumentalk network (minimum step transition update rate is 1 second, minimum fade time between two colors is 1 minute). onsult factory for applications that require additional capabilities. onsult factory for LI Lumentalk applications. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. 6/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

7 TYPIL WIRING IGRMS - continued Wiring olor ode WHIT & STTI OLORS merican olor ode olor ode US Green Yellow/Green Ground lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange Grey 0-10V / ata V imming (IM) 10% minimum dimming value - Power input ( V) - Third party dimmer - Jumper cable (LOIJ) - Lumenfacade Inground (LOI-IM) - IP68 LOI-JOX accessory (optional) - POX STION VIW Wiring etail using LOI-JOX ccessory V imming (IM) - Power input ( V) - rom third party dimmer - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. 0-10V m ratings: passive dimmer (urrent Sink): 3m per fixture, active dimmer (urrent Source): 0.5m per fixture. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. LI imming (LI) 1% dimming value - Power input ( V) - Third party LI controller - Jumper cable (LOIJ) - Lumenfacade Inground (LOI-LI) - IP68 LOI-JOX accessory (optional) - POX STION VIW Wiring etail using LOI-JOX ccessory - LI imming (LI) - Power input ( V) - rom third party LI controller - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 64 LI fixtures per LI loop. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. 7/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

8 TYPIL WIRING IGRMS - continued Wiring olor ode WHIT & STTI OLORS merican olor ode olor ode US Green Yellow/Green Ground lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange Grey 0-10V / ata - Lutron cosystem nabled imming (S) 1% minimum dimming value - Power input ( V) - Lutron cosystem controller - Jumper cable (LOIJ) - Lumenfacade Inground (LOI-S) - IP68 LOI-JOX accessory (optional) - POX STION VIW Wiring etail using LOI-JOX ccessory - Lutron cosystem nabled imming (S) - Power input ( V) - rom Lutron cosystem controller - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. ach Lutron cosystem enabled fixture has its own address; for the example shown, there are a total of 2 cosystem addresses. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. 8/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

9 TYPIL WIRING IGRMS - continued Wiring olor ode WHIT & STTI OLORS merican olor ode olor ode US Green Yellow/Green Ground lack rown Live V White lue Neutral Red/Purple lack 0-10V / ata + Orange Grey 0-10V / ata - Star Layout (MX/RM) 1% minimum dimming value - Third party MX/RM controller - ata input (elden 9841 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-ST - Power input ( V) - Leader cable (LOIL) G - Lumenfacade Inground (LOI-MX/RM) H - Jumper cable (LOIJ) I - IP68 LOI-JOX accessory (optional) J - POX G H I J STION VIW H Wiring etail using LOI-JOX ccessory - MX/RM imming (MX/RM) - Power and data input to fixture (wiring by others) - ap - able to POX aisy hain chain Layout layout (MX/RM) 1% minimum dimming value *vailable for WW version only, 2700K to 2200K G H I J - Third party MX/RM controller - ata input (elden 9841 or equivalent, by others) - ata output to next X (optional, not isolated/not boosted) - X-S - Power input ( V) - Leader cable (LOIL) G - Lumenfacade Inground (LOI-MX/RM) H - Jumper cable (LOIJ) I - IP68 LOI-JOX accessory (optional) J - POX STION VIW H Wiring etail using LOI-JOX ccessory - MX/RM imming (MX/RM) - Power and data input to fixture (wiring by others) - ap - able to POX onsult factory for specific applications and maximum fixture count/cable length recommendations. Maximum of 32 MX/RM enabled fixtures per X output. Maximum of 4 MX/RM repeaters/x cascading in line. Maximum of 6 outputs per X-ST, maximum of 1output per X-S ach fixture requires 1 MX address. SHR version: 5 watts per foot [0.3m], Regular Output version: 8.5 watts per foot [0.3m], High Output version: watts per foot [0.3m]. 9/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

10 HOW TO ORR WHIT & STTI OLORS LOI 100/ Housing: Optics: LOI SHR - Lumenfacade Inground, 5W/ft SHR compliant 1 LOI RO - Lumenfacade Inground, Regular Output, 8.5W/ft LOI HO - Lumenfacade Inground, High Output, 15.25W/ft symmetric WW - symmetric Wallwash optic Symmetric Lumenfacade Inground fixture includes 1x optical chamber (LOI), 1x power and control box (POX) and 1x recessed blockout (RO). The LOI, POX and RO are provided according to the output/color, length and control configuration. Voltage: 100/ volts Length: /16 inches (331mm) (3.39 kg/7.48 lbs) /16 inches (636mm) (6.93 kg/15.28 lbs) /16 inches (941mm) (9.68 kg/21.35 lbs) /16 inches (1245mm) (12.24 kg/26.99 lbs) 6 8x8-8 x x10-10 x x30-30 x 30 35x35-35 x 35 i-symmetric 10x30-10 x 30 10x60-10 x 60 10x90-10 x 90 60x60-60 x 60 80x80-80 x 80 90x90-90 x 90 15x25-15 x 25 30x60-30 x 60 50x80-50 x 80 Tilt Setting: Note: asymmetric wallwash optic is factory set with a 2.5 degree tilt. TS0-0 degrees TS degrees TS5-5 degrees TS20-20 degrees actory set. annot be adjusted in the field. onsider ground level when selecting a tilt setting for your application. olors and olor temperatures: 7 22K K 27K K 30K K 35K K 40K K R - Red (8-10 week lead time) GR - Green (8-10 week lead time) L - lue (8-10 week lead time) onsult factory for availability of static Royal lue, 6500K and 90+ RI. 8 Optical Option: INTL - Internal Louver 3 ontrol: NO - No imming LT - Lumentalk imming 4 IM V imming 5 LI - LI imming 6 S - Lutron cosystem nabled imming 7 MX/RM - MX/RM enabled 8 9 Option: SL - nti-slip lens onsult installation instructions to plan all aspects of the fixture installation. completed LOI ertificate of Installation must be returned to Lumepulse Group to activate the warranty. 1 Not available for 1' fixture lengths. 2 or best results use with HO fixtures at a 6-inch (15cm) setback from surface. ontact factory for application support. 3 The addition of an internal louver will affect beam distribution, consult factory for application support. 4 1% minimum dimming value. Lumentalk enabled fixtures must be commissioned using LumentalkI software and a LI-LT. onsult factory for details. 5 10% minimum dimming value. urrent Sink: 3m/fixture, urrent Source: 0.5m fixture. 6 1% minimum dimming value. 1 LI address per fixture. 7 1% minimum dimming value. 1 cosystem address per fixture. 8 1% minimum dimming value. ixtures set to by fixture resolution. 1 MX address per fixture. 10/10 opyright Lumenpulse year limited warranty. Montreal (Quebec) anada onsult and onditions of Sales.

*To meet 1000kg walk over resistance requirements, cement must support 100% of the exterior surfaces of the blockout.

*To meet 1000kg walk over resistance requirements, cement must support 100% of the exterior surfaces of the blockout. Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Aluminum optical chamber housing Anodized aluminum flush trim Polymer recycled PVC blockout housing Available in, 2, 3 or 4 sections