User s Manual Model WF100 Extension Cable for EXA100
|
|
- Karin Bruce
- 6 years ago
- Views:
Transcription
1 User s Manual Model WF100 Extension Cable for EXA100 1st Edition
2 User s Manual Model WF100 Extension Cable for EXA100 1st Edition
3 Safety Precautions Introduction This instruction manual covers the Extension Cable for EXA100. Other related EXA100 series items are described in the following manuals: Model name Manual Name IM No. PH100 Panel Mount ph Converter IM 12B11A01-01E OR100 Panel Mount ORP Converter IM 12D11A01-01E SC100 Panel Mount Conductivity Converter IM 12D11A01-01E PH10FP KCl Refillable ph Senser IM 12B11C01-01E PH10FP KCl Refillable ph Sensor IM 12B11C01-01E OR10FP KCl Refillable ORP Sensor IM 12C11C01-01E OR10RP KCl Replenish-free ORP Sensor IM 12C11C02-01E SC10XB Conductivity Sensor for SC100 IM 12D11C01-01E PH10HLD Immersion Holder for EXA100 IM 12B11D01-01E PH10HG Guide-pipe Holder for EXA100 IM 12B11D02-01E WTB100 Terminal Box for EXA100 IM 12B11E01-01E WF100 Extension Cable for EXA100 T000E.eps 1st Edition: May (YK) All Rights Reserved, Copyright 2003, Yokogawa Electric Corporation i
4 For the safe use of this equipment (1) About This Manual This manual should be passed on to the end user. The contents of this manual are subject to change without prior notice. The contents of this manual shall not be reproduced or copied, in part or in whole, without permission. This manual explains the functions contained in this product, but does not warrant that they are suitable the particular purpose of the user. Every effort has been made to ensure accuracy in the preparation of this manual. However, when you realize mistaken expressions or omissions, please contact the nearest Yokogawa Electric representative or sales office. This manual does not cover the special specifications. This manual may be left unchanged on any change of specification, construction or parts when the change does not affect the functions or performance of the product. If the product is not used in a manner specified in this manual, the safety of this product may be impaired. (2) Safety and Modification Precautions Follow the safety precautions in this manual when using the product to ensure protection and safety of the human body, the product and the system containing the product. (3) The following safety symbols are used on the product as well as in this manual. DANGER This symbol indicates that an operator must follow the instructions laid out in this manual in order to avoid the risks, for the human body, of injury, electric shock, or fatalities. The manual describes what special care the operator must take to avoid such risks. WARNING This symbol indicates that the operator must refer to the instructions in this manual in order to prevent the instrument (hardware) or software from being damaged, or a system failure from occurring. CAUTION This symbol gives information essential for understanding the operations and functions. Tip This symbol gives information that complements the current topic. SEE ALSO This symbol identifies a source to be referred to. This symbol indicates Protective Ground Terminal This symbol indicates Function Ground Terminal (Do not use this terminal as the protective ground terminal.) This symbol indicates Alternating current ii
5 Safety Precautions After-sales Warranty For repair during the warranty period, carry or send the product to the local sales representative or service office. Yokogawa will replace or repair any damaged parts and return the product to you. Before returning a product for repair under warranty, give us information of the model name and serial number and a description of the problem. Any diagrams or data explaining the problems would also be appreciated. If we replace the product with a new one, we won t provide you with a repair report. Yokogawa warrants the product for the period stated in the purchase quotation. Yokogawa shall conduct warranty service based on its standard. When the customer site is outside of the service area, a fee for dispatching the maintenance engineer will be charged to the customer. In the following cases, customer will be charged for repair fee regardless of warranty period. Failure of components which are out of scope of warranty stated in instruction manual. Failure caused by usage of software, hardware or auxiliary equipment, which Yokogawa Electric did not supply. Failure due to improper or insufficient maintenance by user. Failure due to modification, misuse or outside-of-specifications operation which Yokogawa does not authorize. Failure due to power supply (voltage, frequency) being outside specifications or abnormal. Failure caused by any usage out of scope of recommended usage. Any damage from fire, earthquake, storms and floods, lightning, disturbances, riots, warfare, radiation and other natural changes. Yokogawa does not warrant conformance with the specific application at the user site. Yokogawa will not bear direct/indirect responsibility for damage due to a specific application. Yokogawa Electric will not bear responsibility when the user configures the product into systems or resells the product. Our maintenance service and the supply of repair parts will be covered for five years after the production ends. For product repair, please contact the nearest sales office described in this instruction manual. iii
6 iv
7 Table of Contents Introduction... ii For the safe use of this equipment... ii After-sales Warranty... iii 1. Specification Standard Specifications Model and Suffix code External Dimensions Installation Preparation for Installation Checking for Damage Cable Installation Wiring Procedures Revision Record... i v
8 vi
9 1. Specification 1. Specification The WF100 Extension Cable for EXA100 is a dedicated cable used with a WTB100 Terminal Box for EXA100 for distance between the EXA100 series detector and converter extending the detecter cable length. 1.1 Standard Specifications Type : Specialty 4-conductor cable Finished outside diameter : 6.5 mm Sheath material : Chlorinated polyethylene rubber Cable length : 5 to 45 m (Note*) Note *) Sum of the detector cable and the extension cable is 50 meters maximum. For the extension cable length, see Table 1 below. Table 1. Cable length of Extension cable Detector cable lenrth Minimum length Maximum length 3 m 5 m 45 m 5 m 5 m 45 m 10 m 5 m 40 m T1.1E.EPS When the EXA SC100 is connected, refer to Section 6.3, Wiring resistance correction of the EXA SC100 (IM 12D11A01-01E). 1.2 Model and Suffix code Model Suffix code Option code Description WF100 Extension cable for EXA100 Series Measurement -PH For PH100 system -OR For OR100 -SC For SC100 Option Cable length /C01 5 m /C02 10 m /C03 15 m /C04 20 m /C05 25 m /C06 30 m /C07 35 m /C08 40 m /C09 45 m Note *1 : Total length including sensor cable length should not exceed 50 m. T1.2E.EPS 1-1
10 1.3 External Dimensions External dimensions of Extension cables shown below. WF100-PH (For PH100) (T2) Black (T1) White Approx. 10 Approx. 6.5 Unit : mm Black (T2) White (T1) (RE) Brawn Brawn (RE) (GE) Red Red (GE) (S) Yellow Yellow (S) (SE) Green Green (SE) L : Cable length F1.1.1E.EPS WF100-OR (For OR100) (SE) Black Approx. 10 Approx. 6.5 Black (SE) (RE) Brawn Brawn (RE) (GE) Red Red (GE) (G) Green Green (G) L : Cable length F1.1.2E.EPS WF100-SC (For SC100) (C1) White (C2) Brown Approx. 10 Approx. 6.5 White (C1) Brown (C2) (T2) Black Black (T2) (T1) Red Red (T1) (S) Green Green (S) L : Cable length F1.1.3E.EPS Fig
11 2. Installation 2. Installation 2.1 Preparation for Installation Checking for Damage Cable Installation The WF100 Extension cable is carefully packed to avoid damage during shipment. However, when you receive it, you should carefully unpack and check for visible damage. The WF100 Extension Cable for EXA100 can be used in combination with a WTB100 terminal box when an EXA Series converter a PH100 ph converter, OR100 ORP converter, or SC100 conductivity converter is installed remotely from its detector. Selecting an Installation Site When selecting an installation site, avoid places where the ambient temperature is outside the scope of the specifications, the cable is likely to be damaged, or noise sources exist in the vicinity. Typical noise sourcs are shown below. * Noise sources The following are typical sources of electrical noise * Relays and contacts * Solenoid coil, solenoid valve * Power Lines * Inductive loads * Inverters * Motor commutators * SCRs used for phase-angle control * Wireless transmitters * Welding equipment * High-voltage ignition systems Measures When wiring, take the following measures for noise source. Keep extension cable wiring as far as possible flom the power or ground circuit. Use shielded cables for measures against noise due to static electricity. Ground shielding wires to the ground terminal with single-point grounding, when necessary. Use a twisted pair input wire (in short, equally spaced twisting) for measures against electromagnetic induction noise. 2-1
12 2.2 Wiring Procedures Examples of wiring diagrams of each converter and the cable are illustrated below. For details, refer to the appropriate instruction manuals of the converter (PH100/OR100/ SC100) and the WTB100 terminal box Conduct wiring in accordance with the colors, markings, and numbers indicated on the tab attached to each cable. Connecting to a PH100 converter Contact output 1(NC) Contact output 1(NO) Power supply Contact output 2 Contact output 3 Contact output 4 L N Ground to earth (grounding resistance 100Ω or less) Converter Rear View Terminal name S1(NC) S1(NO) COM1 S2 S3 S4 COM2 L N Terminal name GE (red) S (yellow) RE (brown) (do not use) SE (green) T1 (white) T2 (black) ma( ) ma( ) Shield Extension cable WF100-PH Output signal Terminal box WTB100-PH GE S RE RES SE T1 T2 ph sensor Ground to earth (grounding resistance 100Ω or less) Note : (1) Terminal numbers are indicated on the label side of the converter. (2) Fix sensor cable in place using a wiring clamp. (3) The color in parenthesis indicates the corresponding wire color of a dedicated ph sensor, PH10FP or PH10RP, to be connected. F2.1aE.EPS RED ' YLW BRN GRN WHT BLK WF100-PH it2 jblack it1 jwhite ire jbrawn ige jred is jyellow ise jgreen Converter Side GE S RE SE T1 T2 GE S RE SE T1 T2 Terminal box side Black (T2) White (T1) Brawn (RE) Red (GE) Yellow (S) Green (SE) RED ' YLW BRN GRN WHT BLK F2.1bE.EPS Fig
13 2. Installation Contact output 1(NC) Contact output 1(NO) Contact output2 Contact output3 Contact output4 Connecting to a OR100 converter L N Ground to earth (grounding resistance 100 or less) Terminal name S1(NC) S1(NO) COM1 S2 S3 S4 COM2 L N Terminal name (GE) (G) (RE) (RES) (SE) - - ma( ) ma( ) Converter Rear View Shield Extension cable WF100-OR Analog output Terminal box WTB100-OR GE G RE SE Ground to earth (grounding resistance 100 or less) ORP sensor Note: Terminals are M3.5 screws. Terminal diagram is shown on the name plate on the side of the converter. RED GRN BRN BLK WF100-OR (SE) Black (RE) Brawn GE G RE SE Black (SE) Brawn(RE) (GE) Red (G) Green GE G RE SE Converter side Terminal box side Green (G) Red (GE) RED GRN BRN BLK F2.2bE.eps Contact output 1 (NC) Contact output 1 (NO) Contact output 2 Contact output 3 Contact output 4 L N Ground to earth (grounding resistance 100 or less) Fig. 2.2 Connecting to a SC100 converter Terminal name S1(NC) S1(NO) COM1 S2 S3 S4 COM2 L N Terminal name C1 C2 S I 2 I 1 T1 T2 ma( ) ma( ) Converter Rear View Shield Extension cable WF100-SC Analog output Terminal box WTB100-SC C1 C2 S T1 T2 Ground to earth (grounding resistance 100 or less) SC10XB dedicated conductivity sensor (T2)Black (C1)White (C2)Brawn (T1)Red WF100-SC BRN GRN RED C1 WHT C2 S BLK T1 T2 C1 WHT C2 BRN S GRN T1 RED T2 BLK (S)Grenn Converter side Terminal side F2.3bE.EPS Black (T2) White (C1) Brawn (C2) Red (T1) Grenn (S) Fig
14 (1) Attach a cable gland, supplied with the WTB100 terminal box, to a dedicated cable. First disassemble the cable gland to its individual components, then pass the cable through the packing gland (or adapter), cable holder, packing, dedicated cable, and gasket successively. Attach the relevant nut after inserting the cable into the instrument. The cable gland should be temporarily attached to an area covered by tubing. (2) Draw the cable in the instrument case. Pass the nut through the cables and connect the cable conductors to the terminals correctly. (3) Attach the cable gland to the cable inlet. Install the associated nut in the appropriate position, and then screw in the dedicated cable completely. Secure the packing gland or adapter completely to keep the instrument interior free from moisture. (4) Install the terminal box front cover. Tighten the mounting screws to keep the instrument interior to be airtight. (5) When cables are protected by a conduit, install conduit joints on the adapter completely. 2-4
15 Revision Record Manual Title : Model WF100 Extension Cable for EXA100 Manual Number : Edition Date Remark (s) 1st May Newly published
Installation Guide VL-MV10. Model No.
Installation Guide Model Name Model No. Main Monitor Station VL-MV0 R Main monitor station is described as "main monitor" in this guide. R In this guide, the suffix of each model number (e.g., the "EX"
More informationC200H-AD002/DA002 Analog I/O Units Operation Guide
C200H-AD002/DA002 Analog I/O Units Operation Guide Revised September 1995 Notice: OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes
More informationGuide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area
Guide for installers METTLER TOLEDO MultiRange System solution analog Ex1 Hazardous area Safe area System solution analog Ex1 Contents Contents Page 1 Safety precautions... 2 2 System overview... 3 2.1
More informationOPERATION MANUAL JENDPM008 THERMOCOUPLE PANEL THERMOMETER. TIP TEMPerature Products 340 W Broad Street Burlington, NJ 08016
OPERATION MANUAL JENDPM008 THERMOCOUPLE PANEL THERMOMETER TIP TEMPerature Products 340 W Broad Street Burlington, NJ 08016 1-800-TIP-TEMP Tel. (609) 239-1900 Fax (609) 239-1911 www.tiptemp.com GENERAL
More informationOperating Manual (Edition 04/2004) sinamics. Line Reactors SINAMICS G130
Operating Manual (Edition 04/2004) sinamics Line Reactors SINAMICS G130 Contents 1. Safety Information 2 2. General 5 3. Mechanical Installation 6 4. Electrical Installation 8 5. Technical Specifications
More informationPart No./ 型号 : RGB-Controller-101
Instructions: Thank you for using RGB-Controller-101 of our company. Before installation, please read this manual carefully to ensure fully understand and proper use in order to avoid unnecessary damages
More informationImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL
SPECIFICATIONS MODEL NUMBER: XRT910-0-0-GB-XX XRT911-0-0-GB-XX XTT911-0-0-NN-XX IMPROX TRT ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL Working Environment XRT910-0-0-GB-XX... (Aluminium Extruded
More informationAPSPB PUSH BUTTON ZERO Installation Manual
APSPB PUSH BUTTON ZERO Installation Manual CARDINAL SCALE MFG. CO. 8527-0579-0M Rev A 203 E. Daugherty, Webb City, MO 64870 USA Printed in USA 12/14 Ph: 417-673-4631 Fax: 417-673-2153 www.detectoscale.com
More information4 Wiring Brochure Wiring and installation of specific control
- Wiring Brochure tekmarnet 4 User Switch 480 W 480 09/09 1 Information Brochure Choose controls to match application 2 Application Brochure Design your mechanical applications 3 Rough In Wiring Rough-in
More informationWECON LX3V-2PT2DA BD Board
WECON LX3V-2PT2DA BD Board Website: http://wwwwe-concomcn/en Technical Support: liux@we-concomcn Skype: fcwkkj Phone: 86-591-87868869 Technical forum: http://weconfreeforumsnet/ Ⅰ Mounting instruction
More informationUSER S MANUAL. FX2N-8AD Analog input block
USER S MANUAL FX2N-8AD Analog input block FX2N-8AD Analog input block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation
More informationIn-Ceiling Electric Motorized Front Projection Screen Evanesce Series. User s Guide
In-Ceiling Electric Motorized Front Projection Screen Evanesce Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The
More informationKramer Electronics, Ltd. USER MANUAL. Models: WPN-11, XGA/Component/CV/YC Transmitter WPN-12, XGA/Component/CV/YC Receiver
Kramer Electronics, Ltd. USER MANUAL Models: WPN-11, XGA/Component/CV/YC Transmitter WPN-12, XGA/Component/CV/YC Receiver Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 1 4 Your Component/RGB/YC/CV/XGA
More informationInstruction Manual Model # Block Upconverter
Instruction Manual Model 2115-278# Block Upconverter August 2018, Rev. A MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
More informationRead and understand this manual for safely usage.
TS02-0184 INSTRUCTION MANUAL FOR ELECTRODE LEVEL SENSOR MODEL:CE Read and understand this manual for safely usage. This manual describes the product of standard specification. Read the other manual for
More informationOperation Manual TX20 1/8 DIN Microcomputer Based ph/orp Controller with relays
Operation Manual TX20 1/8 DIN Microcomputer Based /ORP Controller with relays 11751 Markon Drive Garden Grove, CA. 92841 U.S.A. pg. 1 CONTENTS GENERAL INTRODUCTION.....3 INITIAL INSPECTION......3 USING
More informationFX-4AD-TC SPECIAL FUNCTION BLOCK USER'S GUIDE
FX-4AD-TC SPECIAL FUNCTION BLOCK USER'S GUIDE JY992D55901A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX-4AD-TC special
More informationData Acquisition Networks. Installing and Configuring the DM01 Hardware
Data Acquisition Networks Installing and Configuring the DM Hardware What is the DM? D.A.N developed the DM-2 to capture 6 analogue measurements and pulse count in the field. The Average, Maximum and Minimum
More informationGuide for installers. METTLER TOLEDO MultiRange Explosion proof weighing system with IND226x weighing terminal.
Guide for installers METTLER TOLEDO MultiRange Explosion proof weighing system with weighing terminal www.mt.com/support Contents Contents Page 1 Safety instructions... 4 2 System overview... 6 2.1 Typical
More informationGeneral Specifications
General Specifications WG41F11C Compact O Frame GS 14M04B10-20E-Z1 [Style: S1] Overview The WG41F11C Compact O frame is a space-saving frame designed for coating lines of battery electrode sheets. This
More informationMG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV
MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper
More informationElectric Motorized Projection Screen PowerMax Tension Series
Electric Motorized Projection Screen PowerMax Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationWECON LX3V-2TC2DA BD Board
WECON LX3V-2TC2DA BD Board Website: http://wwwwe-concomcn/en Technical Support: liux@we-concomcn Skype: fcwkkj Phone: 86-591-87868869 Tech Group Num: 465230233 Technical forum: http://weconfreeforumsnet/
More informationInstruction Manual Model BlockUpconverter
Instruction Manual Model 2115-55 BlockUpconverter June 2009 - Rev. 0 MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
More informationANALOG I/O MODULES AD268 / DA264 / TC218 USER S MANUAL
UM-TS02 -E026 PROGRAMMABLE CONTROLLER PROSEC T2-series ANALOG I/O MODULES AD268 / DA264 / TC218 USER S MANUAL TOSHIBA CORPORATION Important Information Misuse of this equipment can result in property damage
More information3 Cleaning. 4 Technical data
EXC+ EXC- Sig- SIG+ SEN- SEN+ 2.4 Attaching cable to the analog board Attaching cable of the weighing cell to the system solution Connect the cable to the appropriate terminal strip of the Ex1 system solution
More informationUser Manual TP70L. HDBaseT Extender. All Rights Reserved. Version: TP70L2016V1.1
User Manual TP70L HDBaseT Extender All Rights Reserved Version: TP70L2016V1.1 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different
More informationSINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS
SINAMICS G130 Operating Instructions 03/2013 SINAMICS s dv/dt filter plus Voltage Peak Limiter Safety information 1 General 2 SINAMICS SINAMICS G130 Operating Instructions Mechanical installation 3 Electrical
More informationModel Number Structure
Cycle Control Units CSM DS_E_7_1 Refer to Safety Precautions for All Power Controllers. Used in Combination with the to Enable High-precision Temperature Control Use cycle control to achieve power control
More informationModel 1421 Distribution Amplifier
Model 1421 Distribution Amplifier Installation and Operating Instructions The 1421 Distribution Amplifier provides four independent, wide bandwidth outputs from one video input. The unit is color compatible
More informationInstallation Manual SaVi Note Underwater LED Light
Installation Manual SaVi Note Underwater LED Light Model Numbers SAVI-NOTE7, SAVI-NOTE0 Table of Contents Safety Precautions...2 SaVi Note Install Instructions...3- M Instructions...- Warnings READ AND
More informationCSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
More informationInstallation Manual IPT Installation of skillet systems with 125 A track current. MV a-E.
www.wampfler.com Page 1 of 27 Index Page 1 Basics...4 2 Basic understanding of an IPT -system...5 3 General rules regarding metal parts in close proximity...6 3.1 Envelope free of ferromagnetic material...6
More informationTRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL
www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this
More informationISC202 Quick Start Guide
ISC202 Quick Start Guide The ISC202 is delivered with a general purpose default setting for programmable items. (Default settings are listed in Section 5 and again in Chapter 11). While this initial configuration
More informationCalibration Information
1630 Calibration Information Introduction This document provides the following information for the 1630 (hereafter referred to as the Clamp or UUT): Safety information Symbols Specifications Maintenance
More informationMax. temp. of sensor C. Capillary tube mm. Switching difference K. Sensor cartridge mm
21.610/1 RAK: Universal thermostat How energy efficiency is improved Demand-led controlling, monitoring and limiting, without auxiliary energy. Areas of application For controlling and monitoring the temperature
More informationStarling Tab-Tension 2 Series
Electric Wall/Ceiling Projection Screen Starling Tab-Tension 2 Series For: Spectra White FG and CineGrey 5D User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow
More informationVGA to DVI Extender over Fiber SET
VGA to DVI Extender over Fiber SET Model #: FO-VGA-DVI 2011 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview
More informationMICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More informationOPERATOR MANUAL OSD8865 DIGITAL TRIPLE VIDEO FIBER OPTIC RECEIVER
OPERATOR MANUAL OSD8865 DIGITAL TRIPLE VIDEO FIBER OPTIC RECEIVER INDEX 1 1 TECHNICAL SUMMARY... 4 1.1 BRIEF DESCRIPTION... 4 1.1.1 OVERVIEW... 4 1.1.2 APPLICATIONS... 4 1.1.3 FEATURES AND BENEFITS...
More informationPanel-mounting thermostats, type series EM
Data sheet 602025 Page /5 Panel-mounting thermostats, type series EM Particularities Operating temperature limiter Limit value range up to +650 C with temperature compensation Brief description Panel-mounting
More informationPower Injector 1520 Series
Power Injector 1520 Series Technical Specifications Input voltage 100 to 240 VAC Output voltage 56.0 VDC Voltage range tolerance 54 VDC to 57 VDC Maximum current 1.43 A No load current 15 ma 56VDC@0.71A
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationElectric Wall/Ceiling Projection Screen Saker Plus Series User s Guide
Electric Wall/Ceiling Projection Screen Saker Plus Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen s
More informationUser Manual PS-684. HDBaseT Extender Kit 70m. All Rights Reserved. Version: UHBT70P_2016V1.2
User Manual PS-684 All Rights Reserved Version: UHBT70P_2016V1.2 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model
More informationUser Manual TL-TP70-HDIR 70m Extender with ARC and IR All Rights Reserved Version: TL-TP70-HDIR_180723
User Manual TL-TP70-HDIR 70m Extender with ARC and IR All Rights Reserved Version: TL-TP70-HDIR_180723 Preface Read this user manual carefully before using this product. Pictures shown in this manual is
More information1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT
1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single
More informationAtlas SCR. User Guide. Thyristor and Triac Analyser Model SCR100
Atlas SCR Thyristor and Triac Analyser Model SCR100 User Guide Peak Electronic Design Limited 2004/2008 In the interests of development, information in this guide is subject to change without notice -
More informationInstruction Manual. 2.4G Digital Wireless Four Channel Transmitter System RVS-554W. Reverse With Confidence 1
Instruction Manual 2.4G Digital Wireless Four Channel Transmitter System RVS-554W 1 NOTE! Please read all of the installation instructions carefully before installing the product. Improper installation
More information3M Sensored Termination (15 kv) QX-T15I-vi1-E
3M Sensored Termination () QX-T15I-vi1-E Data Sheet May 2016 Kit Contents: Each kit contains sufficient quantities of the following materials to make three single-phase terminations. 31" (REF) One piece
More informationINTRODUCTION INSTALLATION LIGHTNING RETARDING LOOPS. Figure 1. Relay Box Antenna Connections. Relay Box Cable Connections
INTRODUCTION The Ameritron RCS-8V is a remote controlled coaxial RF switch that will operate with negligible loss, radiation and VSWR at all frequencies up to 250 MHz. Only a slight compromise in VSWR
More informationDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
More informationOperating instructions
108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.
More informationElectric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide
Electric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide Important Safety Precautions Make sure to read this user s guide and follow the procedures below prior to screen operation.
More information6170 Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2115-202 Upconverter November 2011, Rev. C MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
More informationK3NX Process Meter OPERATION MANUAL
Cat.No. N90 E1 1 K3NX Process Meter OPERATION MANUAL K3NX Process Meter Operation Manual Produced January 1998 Notice: OMRON products are manufactured for use according to proper procedures by a qualified
More informationEZCOM-1. PLC - to - AMS MESSAGE DISPLAY INTERFACE INSTALLATION AND OPERATING INSTRUCTIONS. Rev March, 2001
EZCOM-1 PLC - to - AMS MESSAGE DISPLAY INTERFACE INSTALLATION AND OPERATING INSTRUCTIONS Rev 1.3 - March, 2001 CONTENTS Page INTRODUCTION 1 SPECIFICATIONS 1 LIST OF SUPPLIED ITEMS 1 INSTALLATION & TESTING
More informationBe sure to check the camera is properly functioning, is properly positioned and securely mounted, every time you operate your vehicle.
Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer s warranty. The installation instructions do not apply to all types
More informationTUC: Universal thermostat
Product data sheet 3.1 21.700 TUC: Universal thermostat How energy efficiency is improved Control, monitoring and limiting according to needs and with no auxiliary energy. Features Regulates and monitors
More informationKramer Electronics, Ltd. USER MANUAL. Model: VM Video Component Distributor
Kramer Electronics, Ltd. USER MANUAL Model: VM-1045 Video Component Distributor Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VM-1045 Video Component Distributor
More informationInstallation Operation Maintenance
Installation Operation Maintenance Rooftop Energy Recovery Module for TKD / TKH / WKD / WKH YKD / YKH / DKD / DKH # 125-155-175-200 250 265-290-340 # 275-300-350-400-500-600 April 2011 RT-SVX42B-E4 General
More informationGC61 Digital Pressure Gauge. Operation Manual
TY-GC61-009A エ GC61 Digital Pressure Gauge Operation Manual 2016. 3 TY-GC61-009A 1/24 For proper and safe operation GC61 Digital Pressure Gauge is a compact digital pressure gauge which complies with the
More informationOperating Instructions DCI-50-CT Cable Identifier
Operating Instructions DCI-50-CT Cable Identifier 1 CAUTION The equipment covered in these operating instructions should be used by qualified employees, trained in and familiar with the safety-related
More informationCyclo Series. user manual. MartinArchitectural
Cyclo Series user manual MartinArchitectural Measurements are in millimeters 63 Cyclo 02 88 Cyclo 03 1000 81 1190 88 Cyclo 04 98 88 2002 Martin Professional A/S, Denmark. All rights reserved. No part of
More informationGeneral Specifications
General Specifications GS 12E01A06-01E Model TB750G Right Angle Scattered Light Turbidimeter General There are increasing demands for good quality water for both industrial-use and drinking water applications
More informationJENCO ELECTRONICS, LTD.
OPERATION MANUAL JENCO MODEL 378 Indicating temp. controller JENCO ELECTRONICS, LTD. MANUFACTURER OF PRECISON INSTRUMENTS GENERAL INTRODUCTION The model 378 is a high performance industrial grade digital
More informationGC30 Digital Differential Pressure Gauge Operation Manual
TY-GC30-001A GC30 Digital Differential Pressure Gauge Operation Manual NAGANO KEIKI CO., LTD 2004.02.12 For safety of use TY-GC30-001A In order to safely and correctly utilize this device, please read
More informationSPECIAL SPECIFICATION 2344 TMC Support Equipment
2004 Specifications CSJ 0912-00-488 SPECIAL SPECIFICATION 2344 TMC Support Equipment 1. Description. Furnish Traffic Management Center (TMC) support equipment in the City of Missouri City TMC location
More informationWINEGARD INSTALLATION MANUAL. Model GM Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8
WINEGARD INSTALLATION MANUAL Model GM-3000 Carryout Ladder Mount for mounting pipes with outer diameters between 1 to 1-1/8 WARNING: DO NOT USE THE LADDER MOUNT AS A STEP! NOT INTENDED FOR USE WITH THE
More informationIndoor/Outdoor Security System with Quad Monitor User s Manual
Indoor/Outdoor Security System with Quad Monitor User s Manual 4919539 Important! Please read this booklet carefully before installing or using these units. WARNING - These units should ONLY be opened
More informationSCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width
SCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width Before installing the screen winch system, please read the following instructions carefully: The screen winch system must be used
More informationAK-PVE4 Operating Instructions. Measuring of norm signals in wall-type units. Performance:
AK-PVE4 Operating Instructions Measuring of norm signals in wall-type units 1 2 P Performance: Digit heights: 20 mm Colour: red Display range: -999 9999 Wall-type housing: light grey made of ABS-plastic
More informationINTRODUCTION PRODUCT CONCEPT AND DESCRIPTION
1 INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION The Audio Suite is a mainframe which accepts up to ten modular sections thereby permitting individualized selection of preamplifier features and functions.
More informationUser s Manual. Log Scale (/LG) GX10/GX20/GP10/GP20/GM10 IM 04L51B01-06EN. 3rd Edition
User s Manual Model GX10/GX20/GP10/GP20/GM10 Log Scale (/LG) 3rd Edition Introduction Thank you for purchasing the SMARTDAC+ Series GX10/GX20/GP10/GP20/GM10 (hereafter referred to as the recorder, GX,
More informationINSTRUCTION BOOK FOR. Lectern
INSTRUCTION BOOK FOR Lectern Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
More informationFlexiScan. Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL
MODEL NUMBER: HCM991-0-0-GB-XX FlexiScan SPECIFICATIONS Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL Working Environment... Security... Input Voltage... The Impro FlexiScan is designed to work
More informationINTRODUCTION TERMINAL LAYOUTS FX2N-4AD-TC SPECIAL FUNCTION BLOCK USER S GUIDE
FX2N-4AD-TC SPECIAL FUNCTION BLOCK USER S GUIDE JY992D65501A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4AD-TC
More informationInductive sensor BI1.5-EG08K-Y1
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationTube Rotator. User Guide. Version 1.2
Tube Rotator User Guide Version 1.2 Figure 1: Fixed Speed Model Tube holder spindle Tilt adjustment wheel IEC power inlet socket (at rear) Power on/off switch Figure 2: Variable Speed Model Tube holder
More informationINTRODUCTION TERMINAL LAYOUTS FX2N-4AD SPECIAL FUNCTION BLOCK USER S GUIDE
FX2N-4AD SPECIAL FUNCTION BLOCK USER S GUIDE JY992D6520B This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4AD and should
More informationInstant 802.3af Gigabit Outdoor PoE Converter. Model: INS-3AF-O-G. Quick Start Guide
Instant 802.3af Gigabit Outdoor PoE Converter Model: INS-3AF-O-G Quick Start Guide QUICK START GUIDE Introduction Thank you for purchasing the Ubiquiti Networks Instant 802.3af Gigabit Outdoor PoE Converter.
More information1. Safety Instructions Installation Features Remote Control Operation Menu Operation DMX Table 5
www.lightemotion.com.au DERBY2 2-in-1 Laser and Derby Effect. User s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction
More informationFX-2DA SPECIAL FUNCTION BLOCK USER'S GUIDE
FX-2DA SPECIAL FUNCTION BLOCK USER'S GUIDE JY992D52801C This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX-2DA special
More informationSC-C1M SiriusConnect TM Vehicle Tuner
SC-C1M SiriusConnect TM Vehicle Tuner For Special Market Applications Installation Guide Congratulations on the Purchase of your new SIRIUS SC-C1 SiriusConnect TM Vehicle Tuner. The SC-C1M is packaged
More informationLED Backlight for Technics amplifiers
LED Backlight for Technics amplifiers Technics SE-A900S Technics SE-A900SM2 Technics SE-A909S Technics SE-A1000 Technics SE-A1000M2 Technics SE-A1010 Rev. 1.2 B Description The LED module is designed to
More informationDMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
More informationOWNER S MANUAL MOTORIZED 7 WIDE TFT LCD COLOR MONITOR CNT-701
OWNER S MANUAL PW MOTORIZED 7 WIDE TFT LCD COLOR MONITOR CNT-701 ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS UNIT DEVICE WHICH IS NOT APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIACE COULD VOID
More informationSPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment
1993 Specifications CSJ 0027-12-086, etc. SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of color
More informationWeekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min
Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable
More informationInductive sensor. 2-wire, analog output BI8-M18-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M18 x 1 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring diagram Type code Ident no.
More informationModel P/03P Upconverters
Instruction Manual Model 2005-02P/03P Upconverters October 2013, Rev H 2005 TEST UPCONVERTER GHz 100MHz10MHz 1MHz C KU 70 140 IF IN GAIN DC POWER +DC IN +15V, 200 ma RF OUT DC ALARM LO IF FREQUENCY J1
More informationPhono Amplifier brinkmann «EDISON» Manual.
Phono Amplifier brinkmann «EDISON» ----------------------------------------------------------------------------------------------- Manual Preface We congratulate you on the purchase of our «EDISON» phono
More informationKramer Electronics, Ltd. USER MANUAL. Wall Plate Models: SV-301 SV-302 SV-303 SV-304 SV-305
Kramer Electronics, Ltd. USER MANUAL Wall Plate Models: SV-301 SV-302 SV-303 SV-304 SV-305 Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Defining the Wall Plates (for the United
More informationElectronic converter for level transmitters MT03L Instructions manual
Electronic converter for level transmitters MT03L Instructions manual R-MI-MT03L Rev.: 1 English version PREFACE Thank you for choosing the MT03L converter from MT03 series of Tecfluid S.A. This instruction
More informationElectric Wall/Ceiling Projection Screen Saker Tab-Tension Series User s Guide
Electric Wall/Ceiling Projection Screen Saker Tab-Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationBP2-MM/MC Phono Preamplifier Owner s Manual
BP2-MM/MC Phono Preamplifier Owner s Manual Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated
More informationTV Lift System Model CL-65 Installation Instructions
TV Lift System Model CL-65 Installation Instructions Contact: Support@Nexus21.com Toll Free: (866) 500-5438 Phone: (480) 951-6885 Fax: (480) 951-6879 Revised: 01/17/17 Below is a parts list describing
More information1 Safety instructions. 2 Device components. 3 Function. Light Management Relay switch insert 2-channel. Art.-No.: 1202 URE.
Art.-No.: 1202 URE Operationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to
More information