General Specifications
|
|
|
- Curtis Woods
- 6 years ago
- Views:
Transcription
1 General Specifications Models, TAS50 s Models, KMS50 Cables GENERAL This General Specification (GS) sheet describes MIL connector cables and MIL connector terminal blocks enabling connections to field control node (FCN) autonomous controllers. Cables ( and KMS50) / s ( and TAS50) These MIL connector cables and connector terminal blocks are MIL connector-equipped (MIL-C compliant) cables and connectors. Using these cables and terminal blocks makes it possible to reduce wiring connections for switchboard design. Note: should be used with. KMS50 should be used with TAS50. MIL Cable Connector Cover Cable F01E.ai Figure Example of Connecting s to a Cable Yokogawa Electric Corporation , Nakacho, Musashino-shi, Tokyo, Japan Tel.: URL: Copyright Dec. 25, 2008(YK) 5th Edition Nov. 30, 2015(YK)
2 2 Combination of s with Cable / I/O modules can be used in combination with MIL connector cables and MIL connector terminal blocks, as given below. CPU Module Analog I/O Modules Digital I/O Modules Model NFCP050 Table Combinations of s Module name CPU Module for FCN-RTU (1 to 5V Input: 12-Channel, 4 to 20 ma Output: 2-Channel, Status input: 16-Channel, Status output: 16-Channel, Pulse input: 2-Channel, Non-Isolated) MIL connector terminal block (*1) Cable Terminal block (*3) (*3) NFAI141 Analog Input Module (4 to 20 ma, 16-Channel, Non-Isolated) NFAV141 Analog Input Module (1 to 5 V: differential input, 16-Channel, Non- Isolated) NFAV142 Analog Input Module (-10 V to +10 V, 16-Channel, Non-Isolated) NFAV144 Analog Input Module (-10 V to +10 V, 16-Channel, Isolated) NFAI841 NFAB841 Analog (4 to 20 ma Input, 4 to 20 ma Output, 8-Channel Input/8-Channel Output, Non-Isolated) Analog (1 to 5 V input: differential input, 4 to 20 ma Output, 8-Channel Input/8-Channel Output, Non-Isolated) NFAV542 Analog Output Module (-10 V to +10 V, 16-Channel, Non-Isolated) NFAV544 Analog Output Module (-10 V to +10 V, 16-Channel, Isolated) NFAI143 Analog Input Module (4 to 20 ma, 16-Channel, Isolated) NFAI543 Analog Output Module (4 to 20 ma, 16-Channel, Isolated) NFAT141 Thermocouple/mV Input Module (*1) (16-Channel, Isolated) (*2) (*2) NFAI135 Analog Input Module (4 to 20 ma, 8-Channel, Isolated Channels) NFAI835 NFAP135 NFAF135 Analog (4 to 20 ma, 4-Channel Input/4-Channel Output, Isolated Channels) Pulse Input Module (8-Channel, Pulse Count, 0 to 10 khz, Isolated Channels) Frequency Input Module (8-Channel, contact ON/OFF, Voltage pulse, 0.1 Hz to 10 khz, Isolated Channels) NFDV151 Digital Input Module (32-Channel, 24 V DC) KMS50 TAS50 NFDV161 Digital Input Module (64-Channel, 24 V DC) KMS50 (*3) TAS50 (*3) NFDV532 Pulse Width Output Module (4-channel : Up Pulse/Down Pulse, 24 V DC, Isolated) KMS50 TAS50 NFDV551 Digital Output Module (32-Channel, 24 V DC) KMS50 TAS50 NFDV561 Digital Output Module (64-Channel, 24 V DC) KMS50 (*3) TAS50 (*3) *1: should be used with. KMS50 should be used with TAS50. *2: NFAT141 can be used for a mv input only. *3: Requires two MIL connector cables and MIL connector terminal blocks each. Securing Cable - After connecting the cable to the I/O module, secure it with the MIL cable connector cover (NFCCC01) (excluding NFDV161 and NFDV561). - When connecting the MIL connector cable to the NFDV161 or NFDV561, secure it with a connector lock lever. All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Feb. 2,
3 3 FUNCTION SPECIFICATIONS Cable Item Specifications Item Specifications Model TAS50 Connecting Channels MIL connector cable that can be connected Rated voltage Rated current Applicable cable size Screw of terminal block Tightening torque Applicable terminal Connector used Mounting Mounting Screw (For screw mounting) or equivalent 125 V 1 A Max 2 mm 2 M to 1.3 N m KMS50 or equivalent Solderless terminals, 7-mm wide or less HIF3BA-40PA- 2.54DSA (MIL-C compliant) HIF3BA-50PA- 2.54DSA (MIL-C compliant) (*1) 35-mm wide DIN rail, screw mounted Two M4 screws Color Gray Gray Model KMS50 MIL connector terminal block that can be connected Cable length Withstanding voltage TAS50 0.5m, 1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 4.0m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m, 10.0m, 15.0m, 20.0m, 25.0m Between signal and shield: 500 V AC for 1 minute Weight 255g 330g Ambient temperature Ambient humidity Operating atmosphere Altitude -40 to 70 C 10 to 90 % RH (non-condensing) Must be free of corrosive gases or heavy dust. 3000m or less *1: With two incorrect-insertion prevention keys All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Nov. 30,
4 4 SCHEMATIC DIAGRAM : Connector side ( side) Terminal block side ( side) Note: The terminal arrangement on the terminal block side coincides with the connector terminal arrangement on the module side. F02E.ai : TAS50 Connector side (KMS50 side) Terminal block side (TAS50 side) Note: The terminal arrangement on the terminal block side coincides with the connector terminal arrangement on the module side. F03E.ai All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Dec.25,
5 5 EXTERNAL DIMENSIONS : Oval hole Unit: mm Terminal arrangement B A mm Mounting dimensions 7.2 mm F04E.ai : TAS50 Oval hole Unit: mm Terminal arrangement B A mm Mounting dimensions 7.2 mm F05E.ai All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Dec.25,
6 6 Cable: Module side Terminal block side Cable Length (L) L = 0.5 m 1 m 1.5 m 2 m 2.5 m 3 m 4 m 5 m 6 m 7 m 8 m 9 m 10 m 15 m 20 m 25 m F06E.ai Cable: KMS50 Module side Terminal block side Cable Length (L) L = 0.5 m 1 m 1.5 m 2 m 2.5 m 3 m 4 m 5 m 6 m 7 m 8 m 9 m 10 m 15 m 20 m 25 m F07E.ai All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Dec.25,
7 7 SIGNAL ASSIGNMENT Analog Pin No. of Screw Terminal Marking on Pin No. of Screw Terminal Marking on 40 B20 39 A20 38 B19 37 A19 36 B18 35 A18 34 B17 33 A17 32 B16 31 A16 30 B15 29 A15 28 B14 27 A14 26 B13 25 A13 24 B12 23 A12 22 B11 21 A11 20 B10 19 A10 18 B9 17 A9 16 B8 15 A8 14 B7 13 A7 12 B6 11 A6 10 B5 9 A5 8 B4 7 A4 6 B3 5 A3 4 B2 3 A2 2 B1 1 A1 Digital s TAS50 Pin No. of Screw Terminal Marking on Pin No. of Screw Terminal Marking on 50 B25 49 A25 48 B24 47 A24 46 B23 45 A23 44 B22 43 A22 42 B21 41 A21 40 B20 39 A20 38 B19 37 A19 36 B18 35 A18 34 B17 33 A17 32 B16 31 A16 30 B15 29 A15 28 B14 27 A14 26 B13 25 A13 24 B12 23 A12 22 B11 21 A11 20 B10 19 A10 18 B9 17 A9 16 B8 15 A8 14 B7 13 A7 12 B6 11 A6 10 B5 9 A5 8 B4 7 A4 6 B3 5 A3 4 B2 3 A2 2 B1 1 A1 All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Jun 3,
8 8 MODELS AND SUFFIX CODES Model TAS50 Suffix Codes -0N Standard type Model Suffix Codes Description (40- pole plug type, M3.5) (50- pole plug type, M3.5) Cable KMS50 Description Cable (40-pole plug type) Cable (50-pole plug type) -005 Cable length 0.5m -010 Cable length 1.0m -015 Cable length 1.5m -020 Cable length 2.0m -025 Cable length 2.5m -030 Cable length 3.0m -040 Cable length 4.0m -050 Cable length 5.0m -060 Cable length 6.0m -070 Cable length 7.0m -080 Cable length 8.0m -090 Cable length 9.0m -100 Cable length 10.0m -150 Cable length 15.0m -200 Cable length 20.0m -250 Cable length 25.0m ORDERING INFORMATION Specify models and suffix codes. RELATED DOCUMENTS GS 34P02Q13-01E: FCN-RTU Low Power Autonomous Controller Hardware GS 34P02Q30-01E: Field Connection Specifications GS 34P02Q31-01E: Analog s GS 34P02Q35-01E: Digital s TRADEMARK STARDOM is a trademark of Yokogawa Electric Corporation. Other company names and product names in this document are registered trademarks or trademarks of their respective holders. MIL Cable Connector Cover Description Model NFCCC01 MIL Cable Connector Cover All Rights Reserved. Copyright 2008, Yokogawa Electric Corporation Dec.25,
General Specifications
General Specifications Cables (for N-IO) GS 33J62J10-01EN GENERAL This General Specification (GS) covers the specifications of a bus cable and a power supply cable used in the N-IO system. EXTERNAL DIMENSIONS,
General Specifications
General Specifications Cables (for FIO) R3 GENERAL This General Specification (GS) covers the specifications of cables used in Fieldnetwork I/O (FIO) system of CENTUM CS 3000. EXTERNAL DIMENSION Cables
General Specifications
General Specifications WG41F11C Compact O Frame GS 14M04B10-20E-Z1 [Style: S1] Overview The WG41F11C Compact O frame is a space-saving frame designed for coating lines of battery electrode sheets. This
USER S MANUAL. FX2N-8AD Analog input block
USER S MANUAL FX2N-8AD Analog input block FX2N-8AD Analog input block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation
EVENT INPUT/OUTPUT MODULE [PUME]
![EVENT INPUT/OUTPUT MODULE [PUME]](/thumbs/96/127716630.jpg "EVENT INPUT/OUTPUT MODULE [PUME]")
PUM Series Multi-loop module type Temperature controller DATA SHEET EVENT INPUT/OUTPUT MODULE [] is a digital input/output module used as an auxiliary input/output of control modules. Each module, 30mm
STBART0200K standard analog input kit STB - 2 I - 15 bits + sign
Product data sheet Characteristics STBART0200K standard analog input kit STB - 2 I - 15 bits + sign Main Range of product Product or component type Kit composition Analogue input type Analogue input number
R1MS-GH3 BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL THERMOCOUPLE & DC INPUT MODULE MODEL. (8 points; isolated)
INSTRUCTION MANUAL THERMOCOUPLE & INPUT MODULE (8 points; isolated) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
LXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O
Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number
BL67 electronic module 2 analog inputs for thermoelements BL67-2AI-TC
Independent of the type of fieldbus and connection technology used Protection class IP67 LEDs indicate status and diagnostic Electronics galvanically separated from the field level via optocouplers 2 analog
E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
Connecting cables for valves, round plug connectors Product range overview
Connecting cables for valves, round plug connectors Product range overview Version Type code Connection technology (Electrical connection 2) Electrical connection 1: socket M8x1 4-pin NEBV-M8W4L Plug M8x1,
AF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
DATA SHEET. The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source.
Advantys STB Advantys STB Input Module DATA SHEET Description The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source. Features
NTB-500A. Medium Speed Network Terminal Box. Supports dynamic measurement at medium-speed synchronous sampling!
Medium Speed Network Terminal Box Supports dynamic measurement at medium-speed synchronous sampling! Decentralized arrangement and synchronous sampling of all channels. Medium Speed Network Terminal Box
FX-4AD-TC SPECIAL FUNCTION BLOCK USER'S GUIDE
FX-4AD-TC SPECIAL FUNCTION BLOCK USER'S GUIDE JY992D55901A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX-4AD-TC special
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Cylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
Z-D-IN. RS485 Modbus Module 5 Digital Inputs
S SENECA Z-PC Line EN Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - Modbus connection rules - DIP-switches Settings -
1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.
ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read
BNC-2110 DESKTOP AND DIN RAIL-MOUNTABLE BNC ADAPTER
INSTALLATION GUIDE BNC-2110 DESKTOP AND DIN RAIL-MOUNTABLE BNC ADAPTER Introduction This installation guide describes how to install and configure your BNC-2110 accessory with an E Series or waveform generation
Connecting cables for valves, Sub-D Type codes
Type codes NEBV C S1 G 44 K Function NEBV Connecting cables for valves Product design Standard C Easy to clean design Connection technology, left, field device side S1 S7 Sub-D socket Sub-D HD socket Cable
Analog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
General Specifications
General Specifications FVX110 Fieldbus Segment Indicator The FVX110 is a field indicator that allows you to switch and display up to 16 indicated values for FOUNDATION TM fieldbus devices. Turn the scroll
AI-1664LAX-USB. Features. 100KSPS 16-bit Analog Input Unit for USB AI-1664LAX-USB 1. Ver.1.01
100KSPS 16-bit Analog Unit for USB AI-1664LAX-USB * Specifications, color and design of the products are subject to change without notice. This product is a USB2.0-compliant analog input unit that extends
BNC-2120 INSTALLATION GUIDE. Connector Accessory for Multifunction DAQ Devices
INSTALLATION GUIDE BNC-2120 Connector Accessory for Multifunction DAQ Devices This installation guide describes how to install, configure, and use your BNC-2120 accessory. If you have not already installed
Trusted 40 Channel 120 Vac Digital Input FTA
ICSTT-RM290F-EN-P (PD-T8824) Trusted Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface between a field device
ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
Advantys STB DATA SHEET. Advantys STB Output Module. Description. Features
Advantys STB Advantys STB Output Module DATA SHEET Description The Advantys model STBDAO5260 Digital Output Module provides 2 isolated discrete output points that operate on a 115 VAC power source. The
Accessories. Servo Motors. Servo Motors B-47. Accessories
Servo Motors Servo Motors Accessories Accessories Page Cables B-48 Flexible Couplings B-52 Control Module B-55 Data Setting Software B-55 Accessory Sets B-56 Battery B-56 Regeneration Units B-57 B-47 Accessories
Inductive sensor BI1.5-EG08K-Y1
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
WIRING. Connection connector. NPN output type Standard type. Main circuit. High-function type. Main circuit. PNP output type.
INSTRUCTI MANUAL Sensor High-performance Digital Display DP-1 Series Thank you very much for using SUNX products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
AMERICAN NATIONAL STANDARD
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 153 2008 Drop Passives: Splitters, Couplers and Power Inserters NOTICE The Society of Cable Telecommunications
General Specifications
General Specifications GS 12E01A06-01E Model TB750G Right Angle Scattered Light Turbidimeter General There are increasing demands for good quality water for both industrial-use and drinking water applications
Installation. SAPTF33xx-1xx in the Network. Standard Configuration
SAPTF33xx-1xx in the Network Standard Configuration One Unit A device (SAPTF33xx-100) and one device () are required for the standard configuration. The Unit A device is connected to the while the device
LED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
GV3P80 TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink
Characteristics TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink Main Range Product name Device short name Product or component type Device application Trip unit technology Complementary Poles
Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
User s Manual. LG Industrial Systems G3F AT4A. LG Programmable Logic Controller
User s Manual LG Programmable Logic Controller G3F AT4A GLOFA G4F AT3A LG Industrial Systems CONTENTS Chapter 1. INTRODUCTION 1.1 Features 1-1 Chapter 2. SYSTEM CONFIGURATION 2.1 Example of System Configuration
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
MBUS 10 RS232 TO MBUS LEVEL CONVERTER
Media and protocol converters MBUS 10 RS232 TO MBUS LEVEL CONVERTER RS232 to MBus level conversion Maximum 10 MBus slaves Baud Rate: 300 to 19200 bps RS232 MBus opto isolation Over-current and short-circuit
Trusted 40 Channel Analogue Input FTA
PD-T8830 Trusted Trusted 40 Channel Analogue Input FTA Product Overview The Trusted 40 Channel Analogue Input Field Termination Assembly (FTA) T8830 is designed to act as the main interface between a field
Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
General Specifications
General Specifications GS 12Y03C00-01E InfraSpec TM NR801EL Fourier Transform Near-Infrared Analyzer, Desktop type Overview The NR801EL is the at-line model of NR800 series FT- NIR analyzer. It employs
AI-1204Z-PCI. Features. 10MSPS, 12-bit Analog Input Board for PCI AI-1204Z-PCI 1. Ver.1.04
10MSPS, 12-bit Analog Board for PCI AI-1204Z-PCI * Specifications, color and design of the products are subject to change without notice. This product is a PCI bus-compliant interface board that expands
Aegis Electronic Group
SDI-EV-AS INTERFACE MODULE HD-SDI digital interface for the Sony FCB-EV series cameras (FCB-EV7500/7310/7300/7100/5500/5300) 1080p/1080i/720p high definition video Built in test pattern facility RS-232
Trusted 40 Channel 120 Vac Digital Input FTA
PD-T8824 Trusted Trusted 40 Channel 120 Vac Digital Input FTA Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface
HDMI over CAT5 HDBaseT Extender - 4K
HDMI over CAT5 HDBaseT Extender - 4K Product ID: ST121HDBTPW This HDBaseT extender Kit, extends HDMI up to 330 feet (100 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD and Full
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
120 V~ Feed-Through DIN Panels (and Accessories)
The Lutron family of DIN rail panels are designed to accept Lutron DIN power modules (DPMs). The compatible DPMs can be configured in the panel to control multiple load types to fit the size, lighting
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
Emergency lighting units EM powerled
E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs
control motion interface GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs GV 480 / GV 481 Impulse Splitters for Incremental Encoders with all-around
LoopBack Relay. SGLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
LoopBack Relay SGLB363 Series With Built-in AC Bypass Capacitors / DC LoopBack Relay SERIES DESIGNATION SGLB363 RELAY TYPE LoopBack Relay, Sensitive Coil, Surface Mount Ground Shield and J-Leads with AC
AE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT
FN: 341MAN1.DOC AE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT DESCRIPTION AE Series Process Indicators are available with 1", 2.3", 4", 8", or 12" high digits,
LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:
HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement
INTRODUCTION TERMINAL LAYOUTS FX2N-4AD-TC SPECIAL FUNCTION BLOCK USER S GUIDE
FX2N-4AD-TC SPECIAL FUNCTION BLOCK USER S GUIDE JY992D65501A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4AD-TC
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
LC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 400 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
DIN Connectors DIN06 E-03
DIN Connectors DIN0 E-0 Contents Introduction HOSIDEN DIN connectors are supplied to electronic equipment manufacturers both in Japan and overseas and are very well accepted because of high quality, a
EGM Einthoven Goldberger Module Type 701
Operating Instructions for the PLUGSYS Module EGM Einthoven Goldberger Module Type 701 ECG amplifier for bipolar extremity leads after Einthoven and unipolar extremity leads after Goldberger (Version:
Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
Capacitive sensor BCT5-S18-UP6X2T-H1151
M18 1 threaded barrel Plastic, PA12-GF30 Teach-in and configuration via buttons on the device, pin 5 and IO-Link Wiring Diagram Functional principle Type designation Ident no. 2101100 Remark to product
LD-V4300D DUAL STANDARD PLAYER. Industrial LaserDisc TM Player
LD-V4300D DUAL STANDARD PLAYER Industrial LaserDisc TM Player Designed for Exceptional Versatility and Convenience Pioneer designed the LD-V4300D to make it easier than ever to use LaserDiscs for a broad
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
Description. Specifications and Ordering Information 1900/27 Vibration Monitor
R Specifications and Ordering Information 1900/27 Vibration Monitor Description The 1900/27 is a single-channel, stand-alone, locally mounted vibration monitor. It can be used as a stand-alone machinery
Drop Passives: Splitters, Couplers and Power Inserters
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 153 2016 Drop Passives: Splitters, Couplers and Power Inserters NOTICE The Society of Cable Telecommunications
llen-bradley 194R-HM4-NFPA3
Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Product Specifications Rating Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with
LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil
Product data sheet Characteristics LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 -
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
IPC-DT/H20X(PC)T IPC-DT/M20V(PC)T, IPC-DT/L20S(PC)T, IPC-DT/H20X(PC)T. Option. Features. Ver.1.10
Panel-Mount with Analog RGB FLAT PANEL DISPLAY IPC-DT/M20V(PC)T 10.-inch TFT color LCD (60 x80 dots ) IPC-DT/L20S(PC)T 12.1-inch TFT color LCD (800 x600 dots ) IPC-DT/H20X(PC)T 1-inch TFT color LCD (102
DATA SHEET. DC In/AC Out, Externally Communicated System. High AC voltage generator of cold cathode fluorescent lamp for LCD
DATA SHEET INVERTER for LCD MODULE 104PW161 DC In/AC Out, Externally Communicated System 104PW161 inverter for LCD (Liquid crystal display) modules is composed of a DC/AC inversion circuit, a luminance
Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Inductive sensor. 2-wire, analog output BI8-M18-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M18 x 1 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring diagram Type code Ident no.
LED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
Data Sheet GU-LCT-RY-V1-10 GU-LCT-RY-V1-11
Data Sheet GU-LCT-RY-V1-10 Part No.: AA-10276-001 Optical Input / Output: Glass Fibre GU-LCT-RY-V1-11 Part No.: AA-10276-002 Optical Input / Output: Plastic (POF) Picture shows AA-10276-001 (Glass Fibre)
PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
Magnetic Sensor - Incremental EHP
small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display
Routing Swichers 248
Routing Swichers 248 BVG-1500...248 TIME CODE READER BVG-1600...250 TIME CODE GENERATOR BVX-10/10P...252 COMPONENT COLOR CORRECTOR BVX-D10...254 DIGITAL COLOR CORRECTOR BVR-D10/D11...256 REMOTE CONTROL
1. Overview. SSI-1016G interfaces with 24, 25 and 26 bit Temposonics SSI sensor. Block diagram. as PNP open collector output
SSI-1016G Manual Caution: Specifications and outline may be changed without notice MTS Sensors Technology Corporation www.mtssensor.co.jp 2010.02.04 Rev. 1 1 Revision information 2007.03.12: Data-ready
PACSystems* RX3i. Isolated Thermocouple Input Module, 6 Channels, IC695ALG306-EB Isolated Thermocouple Input Module, 12 Channels, IC695ALG312-EB
September 2013 PACSystems* RX3i Isolated Thermocouple Input Module, 6 Channels, IC695ALG306-EB Isolated Thermocouple Input Module, 12 Channels, IC695ALG312-EB Isolated +24 VDC Power Isolated Thermocouple
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter
PSI-MOS-RS232/FO 850 E Serial to Fiber Converter perle.com/products/serial-fiber-converters/psi-mos-rs232-fo850e-rs232-to-fiber.shtml Connect RS232 devices to fiber optic cable Extend serial data up to
Material: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
LH1D Series Surface Mount Indicators
Jumbo Dome LH1D Series Surface Mount Indicators IDEC LED Spider (100506) Excellent Visibility From the front and the side. New ø66 Jumbo Dome Ideal for Mounting on IP67 Protection Can be used in environments
MAXX BOX. MX102/202 Series. MAXX Box
MX102/202 Series MAXX Box MAXX BOX 1 C O N T E N T S SECTION 1: OVERVIEW... 4 Introduction... 4 Description... 4 Ordering Information... 4 Specifications... 5 Environmental... 5 Electrical... 5 Physical...
ODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
AI-1616L-LPE. Features. High-precision Analog input board (Low Profile size) for PCI Express AI-1616L-LPE 1. Ver.1.02 Ver.1.01
High-precision Analog input board (Low Profile size) for PCI Express AI-1616L-LPE This product is a multi-function, PCI Express bus-compliant interface board that incorporates high-precision 16-bit analog
PHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
EXPlora. Introduction
Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant
Eddy Current Probe System
CMSS 785 Eddy Current Probe System API-670 Proximity transducer system, 5 mm and 8 mm Eddy Current Probe System The CMSS 785 system is an eddy current type non-contact displacement/ vibration system, used
CC-Link IE Field Network Analog-Digital Converter Module User's Manual -NZ2GF2BN-60AD4 -NZ2EX2B-60AD4
CC-Link IE Field Network Analog-Digital Converter Module User's Manual -NZ2GF2BN-60AD4 -NZ2EX2B-60AD4 SAFETY PRECAUTIONS (Read these precautions before using this product.) Before using this product,
LED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
Precision Linear Motor / Stepper Motor Stage Reference Manual (Open and Closed Loop Versions)
PPS-20 Series Precision Linear Motor / Stepper Motor Stage (Open and Closed Loop Versions) PPS-20 Linear/Stepper Motor Positioner Stage Rev 3.06 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine,
Fibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
www.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
Emergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation