ENGINEERING PUBLICATION

Size: px
Start display at page:

Download "ENGINEERING PUBLICATION"

Transcription

1 ENGINEERING PUBLICATION MOTION CONTROL DIVISION PRODUCT: JUSP-NS600 SIGMA II INDEXER SUBJECT: USING THE DIGITAL OPERATOR WITH THE SIGMA II INDEXER CATEGORY: TECH NOTE ENGINEER: Paul Zajac DISTRIBUTION: YEA Summary: The following document describes how to use the digital operator with the JUSP-NS600 Sigma II Indexer The digital operator can be used to monitor the status of the servo system, perform auxiliary functions, and read and write parameters, index table settings, jog speed table settings, and zone table settings, when connected to the CN7 communication port on the Indexer Page 1 of 62

2 INDEXER JUSP-NS600 Using the Digital Operator 1 Connection - P2 2 Status Display Screen - P3 3 Switching the Basic Screen - P4 4 Parameter Editing Screen - P5 5 Monitor Screen - P7 Un000 Motor Speed P8 Un002 Torque P8 Un003 No of Speed Pulses P8 Un004 Electrical Angle P8 Un005 SGDH Input Signal P8 Un006 SGDH Output Signal P8 Un007 Reference Speed P8 Un008 Position Deviation P8 Un009 Cumulative Load Factor P9 Un00A Regenerative Load Factor P9 Un00B DB Load Factor P9 Un00C Position Reference Counter P9 Un00D Encoder Pulse Counter P9 Un800 Error P10 Un801 NS600 Input Signal P10 Un802 NS600 Output Signal P10 Un803 Status Flag P10 Un804 Current Position of Position P10 Reference Un805 Current Position of Motor P10 Un806 Positioning Target Position P11 Un807 Positioning Distance P11 Un808 Registration Target Position P11 Un809 Registration Range P11 Un80A Program Step P11 Un80B Elapsed Time Status of Event P11 Un80C Execution Status of LOOP P11 Un80D Serial Communication Received P12 Character Trace Un80E Number of Serial Communication P12 6 Auxiliary Function Execution Screen - P14 Fn000 Alarm Trace Display P15 Fn001 Rigidity Setting P16 Fn002 JOG Operation P17 Fn003 Origin Search P18 Fn005 Parameter Initialization P20 Fn006 Alarm Traceback Initialization P21 Fn007 Store Inertia Ratio P22 Fn008 Reset Absolute Encoder P23 Fn00C Analog Monitor Zero Adjustment P25 Fn00D Analog Monitor Gain P26 Adjustment Fn00E Motor Current Automatic Zero P27 Adjustment Fn00F Motor Current Manual Zero P28 Adjustment Fn010 Write Protection Setting P29 Fn011 Motor Type Code Display P30 Fn012 SGDH Software Version Display P31 Fn013 Multi-Turn Limit Setting P32 Fn800 NS600 Software Version P34 Display Fn801 NS600 Model Code Display P35 Fn802 NS600 Unique Specification P36 Number Display Fn803 Save Program (Index) Table P37 Fn804 ZONE Table Storage P38 Fn805 Save JOG Speed Table P39 Page 2 of 62

3 1 Connection Connect to CN7 on the NS600 Digital Operator JUSP -OP02A Key Name Function ALARM RESET DSPL SET ALARM DSPL/SET /R This operates as an alarm reset in the status display screen It is used to switch screens and operate auxiliary functions Used for numeric input UP DOWN Used for deleting numbers CN LEFT RIGHT Used for moving the cursor, JOG SVON JOG SVON Used for switching the servo ON/OFF during JOG operation, The digital operator can be connected/disconnected with the power Page 3 of 62

4 2 Status Display Screen Display Meaning Servo OFF state bb bb:base Block Servo ON state run Motor Running INPOSITION Lit during servo Control Power OFF Main Right Box Pot not PLS P-OT state Forward run prohibition by P-OT signal P-OT:Positive-side Over Travel N-OT state Reverse run prohibition by N-OT signal N-OT:Negative-side Over Travel P-LS state Forward run prohibition by according to parameter P-LS:Positive-side Limit Switch nls N-LS state Reverse run prohibition according to parameter N-LS:Negative-side Limit Switch Code Axx Alarm or warning state Axx:SGDH alarm or warning code Code ExxA Alarm state ExxA: NS600 Alarm Code Code ExxE 2 Displayed for only 2 minutes upon alarm occurrence StorE Flashing Storing to flash memory Do not shut off control power at this time InIt Flashing Initializing factory settings Do not shut off control power at this time Important In this screen ALARM RESET Only acts as an alarm reset At alarm occurrence, reset after removing the cause of the alarm Page 4 of 62

5 Page 5 of 62

6 3 Basic Screen Switching Exp bb Status Displays the status at "bb", "run", etc Details? P3 DSPL SET Screen switches each time pressed Exp Fn000 Auxiliary Function Displays the function "Fn" and its sequence number Details? P14 DSPL SET Screen switches each time pressed Exp Parameter Editing Displays the parameter "Pn" and its sequence Pn000 number DSPL SET Screen switches each time pressed Exp Un000 Monitor Displays "Un" and its sequence number Details? P7 DSPL SET Screen switches each time pressed Exp Po000 Program (Index) Table Editing Displays "Po", "SP", etc, and its sequence number Details? P43 DSPL SET Screen switches each time pressed Exp ZONE Table Editing Displays "NP", "Zn", etc, and its sequence number ZP000 Details? P53 DSPL SET Screen switches each time pressed Exp JOG Speed Table Editing Displays "JS" and its sequence number JS000 Details? P55 DSPL SET Screen switches each time pressed Page 6 of 62

7 Page 7 of 62

8 4 Parameter Editing Screen Select parameter number here (Pn801 in this case) Pressing this displays the current settings (In this case "0") Pressing without editing returns to the parameter number screen Edit here (in this case change to "2") Supplement Although the parameters from Pn800 on up have a function operating which automatically displays the exact value for the setting range when said setting This flashes and saves to the EEPROM when pressed range is exceeded, this function does not operate in parameters below Pn800 Operate these so that the setting Wait until flashing stops Do not turn off control power during this time values are within range as the values will not be changed when the value has exceeded the setting range Returns to the parameter number screen when pressed Imp There are both online and offline parameters Offline parameters are enabled after the control power is cycled Page 8 of 62

9 The parameter display methods are shown in the table below Number Type Display Method Exp: 5-digit Decimal Exp: This display is a parameter in units of digits For example, 4-digit Hexadecimal if Pn0000 is stated, this indicates the last digit at the bottom of Pn000 Exp: 8-digit Decimal Switches the upper 3-digits Upper and lower 5-digits screens Lower Exp: 8digit Signed Decimals Switches the upper 3-digits and lower 5-digits screens "+" Upper Lower Page 9 of 62

10 5 Monitor Screen Select monitor number here (Pn80D in this case) Pressing this displays the monitor value (in this case 00 0D) Returns to the monitor number screen when pressed Operation will continue further in accordance with the monitor number A description of each monitor is given below Page 10 of 62

11 Monitor Number Monitor Content Exp: Un000 Motor Speed [rpm] Displays the motor speed Exp: Un002 Torque [%] Displays the torque Displays as a percentage [%] of rated torque Exp: Un003 No of Speed Pulses Displays the number of encoder pulses counted from the start of the encoder C-phase Exp: Un004 Electrical Angle [deg] Displays the electrical angle of the motor Displays whether each signal is ON/OFF Exp The ON/OFF logic is the input photocoupler ON/OFF Un005 SGDH Input Signal ( CN1 ) state OFF ON Not (Always ON) /RGRT Not (Always OFF) /DEC P-OT N-OT /S-ON Not (Always OFF) Displays whether each signal is ON/OFF Exp The ON/OFF logic is the output photocoupler ON/OFF Un006 SGDH Output Signal state OFF ON ALO ALO ALO AL /WARN /BK /S-RDY Exp: Un007 Reference Speed [rpm] Displays the reference speed of the position reference Un008 Position Deviation [Command Unit] Exp: 6250[command SAt Displays the position deviation Displays "SAt" when ±9999 us exceeded Page 11 of 62

12 Monitor Number Monitor Content Exp: Un009 Cumulative Load Factor Displays the operating torque at 10sec intervals Displays as a percentage [%] of rated torque Exp: Un00A Regenerative Load Factor Displays the power consumption of the regen resistor at 10sec intervals Displays as a percentage [%] of allowable regen resistor Un00B DB Load Factor [%] Exp: Displays the power consumption of the dynamic brake at 10sec intervals Displays as a percentage [%] of allowable dynamic brake power consumption Displays the position reference counter used in the monitor Exp: [Command or Un00 Position Reference Counter Switches to the upper Upper 2 2Bytes and lower Lower 2 2Bytes screen Pressing either one will clear the counter Displays the encoder pulse counter used in the monitor Exp: 89ABCDEF or Un00 Encoder Pulse Counter [Pulses] Switches to the upper 2Bytes and Upper 2 lower 2Bytes screen Lower 2 Pressing either one will clear the counter Page 12 of 62

13 Monitor Number Monitor Content Exp: Displays the most recently occurred Un800 Error error Displays "none" if no errors have none ever occurred Displays whether each signal is ON/OFF Exp The ON/OFF logic is the input photocoupler ON/OFF Un801 NS600 Input Signal ( CN4 ) state OFF ON /SEL4;/JOG3 /SEL3;/JOG2 /SEL2;/JOG1 /SEL1;/JOG0 /MODE0/1 /START;/HOM /PGMRES;/JOGP /SEL0;/JOG Displays whether each signal is ON/OFF Exp The ON/OFF logic is the input photocoupler ON/OFF Un802 NS600 Output Signal state OFF ON /POUT4 /POUT3 /POUT2 /INPOSITIO /POUT0 /POUT1 Exp Displays various flags showing the status Active Un803 Status Flag Inactive OFF Main Torque Program running INPOSITIO NEA DE Aborting program or positioning Displays the reference speed of the current position Un804 Current Position of Position Reference Exp: [command Switches the upper 3-digits and "+" Upper lower 5-digits screens Lower Displays the reference speed of the motor Un805 Current Position of Motor Exp: [command Switches the upper 3-digits Upper and lower 5-digits screens Lower Page 13 of 62

14 Monitor Number Monitor Content Displays the positioning target Un806 Positioning Target Position Exp: [command [Command Unit] Switches the upper 3-digits "+" Upper 3-digits and lower 5-digits screens Lower 5-digits Displays the distance from the positioning start to the target position Un807 Positioning Distance Exp: [command [Command Unit] Switches the upper 3-digits and Upper 3-digits lower 5-digits screens Lower Displays the registration target position fixed by latching Un808 Registration Target Position Exp: [command [Command Unit] Switches the upper 3-digits "+" Upper 3-digits and lower 5-digits screens Lower 5-digits Displays the registration distance Un809 Registration Distance Exp: [command [Command Unit] Switches the upper 3-digits Upper 3-digits and lower 5-digits screens Lower Exp: Displays the currently executed Un80A Program Step program step Displays "End" when no program is Un80B EVENT Time Progress Status [msec] Exp: being executed End Displays the progress state during a program (Index) table event Un80 LOOP Execution Progress Status Exp: Displays the progress state for a program (Index) table LOOP [Times] Page 14 of 62

15 Monitor Number Monitor Content Shows the history of characters received in serial communication Exp Received ASCII No of Characters from End Reception (Hexadecimal Un80 Serial Communication These can be traced back up to 99 characters from the end Reception Empty: No reception errors The following values are calculated and displayed should there be an error 1: Overrun Error 2: Framing Error 4: Parity Error Exp Exp: 5 Un80E Serial Communication Shows the number of characters received in serial communication Exp: 1 Un80F Serial Communication Shows the number of characters which resulted in reception errors in serial communication Page 15 of 62

16 Monitor Number Monitor Content Shows the history of characters transmitted in serial communication Exp Un810 Serial Communication These can be traced back up to 39 characters from the end No of Characters Transmitted Code ASCII Exp: 17 Un811 Serial Communication Shows the number of characters transmitted in serial communication Page 16 of 62

17 6 Auxiliary Function Execution Screen Select auxiliary function number here Pressing this enters the various auxiliary function screens Exp The display and operation differs with each auxiliary function Returns to the monitor number screen Page 17 of 62

18 Auxiliary Number Function Fn000 Alarm Trace Display Displays the history of previously generated alarms Use this to enter the alarm trace display Pressing this again returns you to the auxiliary function screen Exp How many alarms Alarm Code These can be traced backup to nine instances none Displays "none" if there is no alarm Page 18 of 62

19 Auxiliary Number Fn001 Function Rigidity Setting This sets the machine rigidity Upon execution, this updates the parameters Pn100, Pn101, Pn102, Pn401, and stores the data in the EEPROM Enters the rigidity setting screen Displays the current settings (In this case "4") Pressingg without editing returns you to the auxiliary Edit here (in this case change to "5") function number screen Execute using this Wait until flashing stops Do not turn off control power during this done time Returns you to the Auxiliary Function Number Screen Page 19 of 62

20 Auxiliary Number Function Fn002 JOG Operation Performs JOG operation! Note P-OT, N-OT, P-LS, N-LS (Forward or reverse prohibition by signal or parameter) are disabled during JOG operation Use this to enter the JOG operation screen JOG Supplement No servo ON in alarm state Returns you JOG SVON To the auxiliary This switches the servo ON/OFF function screen number This turns the motor forward This turns the motor in reverse Returns you The speed can be modified in parameter To the auxiliary Pn304 function number screen Common error Display Meaning E5AE: "Unexecutable in servo ON state" error Cannot be executed while servo is ON Turn servo OFF and try again E5CE: "Unexecutable with main power OFF" error Cannot be executed while main power is OFF Turn main power ON and try again E5EE: "Unexecuteable while program is running" error Execution is not possible as the program is running or has been aborted Page 20 of 62

21 Auxiliary Number Function Fn003 Origin Search Turn the motor and search for the C-phase! Note P-OT, N-OT, P-LS, N-LS (Forward or reverse prohibition by signal or parameter) are disabled during origin search Enters into the origin search Note CSr No servo ON in alarm state Returns you JOG SVON To the auxiliary This switches the servo ON/OFF function screen number To the auxiliary function screen Returns you number This rotates the motor forward at 60rpm This rotates the motor in reverse at 60rpm The motor stops and the screen flashes upon finding the C-phase Returns you To the auxiliary function screen number Common errors Display Meaning E5AE: "Unexecutable in servo ON state" error Cannot be executed while servo is ON Page 21 of 62

22 E5CE: "Unexecutable with main power OFF" error Cannot be executed while main power is OFF Turn main power ON and try again E5EE: "Unexecuteable while program is running" error Execution is not possible as the program is running or has been aborted Try again after resetting program execution Page 22 of 62

23 Auxiliary Number Function Fn005 Parameter Initialization Initializes the parameters and returns to the factory settings Important Always displayed in the servo OFF state Use this to enter the parameter initialization screen PInIt Pressing Without executing will return you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Cycle the control power End Common errors Display Meaning E5AE:"Unexecutable in servo ON state" error Cannot be executed while servo is ON Turn servo OFF and try again Page 23 of 62

24 Auxiliary Number Function Fn006 Alarm Trace Initialize Clears the history of previously generated alarms Use this to enter the alarm trace initialization screen trclr Pressing Without executing will return you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 24 of 62

25 Auxiliary Number Function Fn007 Store Inertia Ratio Saves the inertia ratio requested in online autotuning into the parameters When executed, it updates the inertia ratio requested in parameter Pn103 and stores it in the EEPROM Enters the inertia ratio storage screen Exp Displays the requested inertia ratio Pressing without executing will return you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 25 of 62

26 Auxiliary Number Function Fn008 Absolute Encoder Reset Resets the absolute encoder and clears the recorded position data Perform in the following situations At first machine start-up When an encoder back-up alarm occurs When the encoder cable is disconnected Enters into the absolute encoder reset screen PGCL Press this several times to set "PGCL5" PGCL Pressing Without executing will return you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Cycle the control power End Page 26 of 62

27 Common errors Display Meaning E5AE: "Unexecutable in servo ON state" error Cannot be executed while servo is ON Turn servo OFF and try again E61E: Encoder Mismatch Error Cannot be executed without absolute encoder Improper operation Try again no Page 27 of 62

28 Auxiliary Number Function Fn00C Analog Monitor Zero Adjustment Executes analog monitor (offset voltage) zero adjustment This enters the channel selection DSPL SET CH1_ Switches the channels CH2_ Returns you To the auxiliary or Enters the adjustment screen Pressing this again returns you to the channel function screen Exp number selection screen This displays the current adjustment value Adjusts the voltage Returns you To the auxiliary function number screen Page 28 of 62

29 Auxiliary Number Function Fn00D Analog Monitor Gain Adjustment Performs gain adjustment on analog monitor This enters the channel selection DSPL SET CH1_ Switches the channel CH2_ Returns you To the auxiliary? Enters the adjustment screen Pressing this again returns you to the channel function screen Exp number selection screen This displays the current adjustment value Adjusts the voltage Returns you To the auxiliary function number screen Page 29 of 62

30 Auxiliary Number Function Fn00E Motor Current Automatic Zero Executes automatic motor current (offset current) zero adjustment Because the offset adjustment for the motor current detection signal is adjusted prior to delivery by Yaskawa, it is normally not necessary for the customer to make adjustments Use this only when the torque ripple based on the current offset is believed to be producing an excessive error, or when more precision is needed to further decrease the torque ripple Careless execution of this function can lead to degradation of the performance Important characteristics Perform this only if the torque ripple occurrences are obviously larger than in other servo amplifiers Enters into the motor current automatic zero adjustment screen Cur_o Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Common errors Display Meaning E5AE: "Unexecutable in servo ON state" error Cannot be executed while servo is ON Turn servo OFF and try again E5CE: "Unexecutable with main power OFF" error Cannot be executed while main power is OFF Turn main power ON and try again Page 30 of 62

31 Auxiliary Number Function Fn00F Motor Current Man ual Zero Executes manual motor current (offset current) zero adjustment Because the offset adjustment for the motor current detection signal is adjusted prior to delivery by Yaskawa, it is normally not necessary for the customer to make adjustments Use this only when the torque ripple based on the current offset is believed to be producing an excessive error, or when more precision is needed to further decrease the torque ripple Important Important Careless execution of this function can lead to degradation of the performance characteristics If the torque ripple occurrences are obviously larger than in other servo amplifiers, then perform automatic offset adjustment (Fn00E) During manual adjustment, rotate the motor at about 100rpm, and adjust so that the ripple in the torque monitor is minimized It is necessary to well balance the motor U-phase current and V-phase current offset Perform the adjustment on both sides This enters the channel selection screen U-P DSPL SET V-P Cu1_o Switches the channel Cu2_o Returns you To the auxiliary? Enters the adjustment screen Pressing this again returns you to the channel function screen Exp number selection screen This displays the current adjustment value Adjusts the motor current Returns you To the auxiliary function number screen Page 31 of 62

32 Auxiliary Number Function Fn010 Write Protection Sets write protection When write protected the program (index) table, ZONE table, JOG speed table, and parameters cannot be changed, and incomplete auxiliary functions cannot be executed Pressing this enters you into the write-protection setting screen This displays the current setting Pressing Edit using Setting 0001: Write-Protect Without executing this 0000: Write-Protect returns you to the auxiliary function number screen This flashes and saves to the EEPROM when pressed Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Cycle the control power End Page 32 of 62

33 Auxiliary Number Function Fn011 Motor Type Code Display Displays the motor type code, encoder type code, and SGDH special specification numbers Use this to enter the motor code display screen Pressing this again returns you to the auxiliary function screen Exp Motor Type Code DSPL SET This proceeds to the next item Exp Motor DSPL SET This proceeds to the next item Exp Encoder Type Code DSPL SET This proceeds to the next item Exp SGDH Special Specification Numbers DSPL SET Return using this Page 33 of 62

34 Auxiliary Number Function Fn012 SGDH Software Version Display Displays the SGDH and Encoder software versions Use this to enter the software version display screen Pressing this again returns you to the auxiliary function screen Exp SGDH Encoder Software Version DSPL SET This proceeds to the next item Exp Encoder Software Version DSPL SET Return using this Page 34 of 62

35 Auxiliary Number Function Fn013 Multi-Turn Limit Setting Sets the multi-turn limit Upon execution, updates the maximum multi-turn limit stored in the absolute encoder to the value in Pn205! Danger Multi-turn limit change is not necessary in application performing linear operation It is dangerous to carelessly operate this function If a multi-turn limit non-coincidence error is generated, always check first whether the servo amplifier parameter Pn205 is correct Operating Fn013 with an incorrect value in Pn205 results in incorrect values being set into the encoder Although no alarm will result, large position deviations will be detected, and there is a risk of the machine moving to an unmeasured position Pressing this enters you into the multi-turn limit setting screen PGSE Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Cycle the control power End Page 35 of 62

36 Common errors Display Meaning E61E: Encoder Mismatch Error Cannot be executed without absolute encoder E62E: "Unexecutable unless ACC" error Cannot be executed without alarm ACC Alarm ACC occurs only when the multi-turn maximum value stored in the absolute encoder does not coincide with the value in parameter Pn205 Page 36 of 62

37 Auxiliary Number Function Fn800 NS600 Software Version Display Displays the NS600 software version Use this to enter the software version display screen Pressing this again returns you to the auxiliary function screen Exp Software Version Page 37 of 62

38 Auxiliary Number Function Fn801 NS600 Device Codes Display Displays NS600 device codes Use this to enter the device code display screen Pressing this again returns you to the auxiliary function screen Device Codes Page 38 of 62

39 Auxiliary Number Function Fn802 NS600 Special Specification Displays NS600 special specification numbers This enters the special specification number display Pressing this again returns you to the auxiliary function screen Exp Special Specification Number Page 39 of 62

40 Auxiliary Number Function Fn803 Program (Index) Table Save Saves the program (index) table Upon execution, stores the program (Index) table on the RAM in the flash memory The data stored in the flash memory remains even if power is cut off This enters the program (Index) table storage screen StorE Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 40 of 62

41 Auxiliary Number Function Fn804 ZONE Table Save Stores the ZONE speed table Upon execution, stores the ZONE speed table on the RAM in the flash memory The enters you into the ZONE table storage screen StorE Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 41 of 62

42 Auxiliary Number Function Fn805 JOG Speed Table Save Stores the JOG speed table Upon execution, stores the JOG speed table on the RAM in the flash memory The data stored in the flash memory remains even if power is cut off This returns you to the JOG speed table storage screen StorE Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 42 of 62

43 Auxiliary Number Function Fn806 Program (Index) Table Initialize This initializes the program (Index) table and returns to the factory settings This enters the program (Index) table initialization screen InIt Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Common errors Display Meaning E5EE: "Unexecuteable while program is running" error Execution is not possible as the program is running or has been aborted Page 43 of 62

44 Auxiliary Number Function Fn807 ZONE Table Initialize Initializes the ZONE table and returns to the factory settings The enters you into the ZONE table initialization screen InIt Pressing Without executing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 44 of 62

45 Auxiliary Number Function Fn808 JOG Speed Table Initialize Initializes the JOG speed table and returns to the factory settings This returns you to the JOG speed table initialization screen InIt Pressing returns you to the auxiliary function number screen DSPL SET Execute using this Wait until flashing stops Do not turn off control power during this time done Returns you to the Auxiliary Function Number Screen Page 45 of 62

46 7 Program (Index) Table Editing Screen Displays each column with this symbol Po SP rd rs ou EV Lo ne PGMSTE POS SPD RDST RSPD POUT EVENT LOOP NEXT 0 1 POS000 SPD000 RDST000 RSPD000 POUT000 EVENT00LOOP000 NEXT000 POS001 SPD001 RDST001 RSPD001 POUT001 EVENT00LOOP001 NEXT POS127 SPD127 RDST127 RSPD127 POUT127 EVENT12LOOP127 NEXT127 Moves between the rows and columns Horizontal PGMSTE 0 1 POS SPD POS000 SPD000 POS001 SPD001 Motion PGMSTE 0 1 POS SPD POS000 SPD000 POS001 SPD001 Vertical Motion PGMSTE 0 1 POS SPD POS000 SPD000 POS001 SPD001 This enters the setting editing screen Return by pressing a second time Exp Edit using this StoP Execute Fn803 so that the editing results are not erased at power OFF Page 46 of 62 StorE

47 Page 47 of 62

48 Common errors Display Meaning E5EE: "Unexecuteable while program is running" error The program (Index) table cannot be modified while the program is running or when aborted Modify after resetting the program operation Page 48 of 62

49 Column POS Positioning PGMSTE Target Position Enters the setting editing screen Press a second time to return Set to " -" - Set to "INFINITE" -InFI Set to "+INFINITE" +InFI Move Cursor Move Cursor I+123 Exp: Set to Move Cursor Move Cursor A+123 Exp: Set to A Set to "STOP" StoP Page 49 of 62

50 Column SPD Positioning PGMSTE Speed Enters the setting editing screen Press a second time to return Upper 3-digits Lower 5-digits Exp: Move Cursor Modify Modify Page 50 of 62

51 Column RDST Registration PGMSTE Distance Enters the setting editing screen Press a second time to return Upper 3-digits Lower 5-digits Exp: Move Cursor Modify Modify - Becomes "-" when smaller than zero Page 51 of 62

52 Column RSPD Registration PGMSTE Speed Enters the setting editing screen Press a second time to return Upper 3-digits Lower Exp: Move Cursor Modify Modify Page 52 of 62

53 Column POUT Programmable PGMSTE Output Signal Enters the setting editing screen Press a second time to return Exp:":::: ::::: Move Cursor Set to ":" : Modify Setting Set to "Z" Z Modify Setting Set to "A" A Modify Setting Set to "n" n Page 53 of 62

54 Column EVENT Condition PGMSTE Enters the setting editing screen Press a second time to return Set to ":" : Move Cursor Move Cursor SEL0t Exp: Set to SEL0T00000 Move Cursor Exp: Set to DT00000 dt Move Cursor Exp: Set to NT00000 nt Move Cursor Exp: Set to IT00000 It Move Cursor Exp: Set to T00000 t Page 54 of 62

55 Column LOOP # of Times PGMSTE Executed Enters the setting editing screen Press a second time to return Move Cursor Exp: Modify Setting Page 55 of 62

56 Column NEXT Next PGMSTEP PGMSTE executed Enters the setting editing screen Press a second time to return Move Cursor Exp: Modify Setting End Becomes "End" when smaller than zero Page 56 of 62

57 8 ZONE Table Editing Screen Displays each row with this symbol ZP Zn ZONE ZONEP ZONEN ZONEP00 ZONEN00 ZONEP00 ZONEN00 ZONEP03 ZONEN03 Moves between the rows and columns Horizontal Motion ZONE ZONEP ZONEN ZONE ZONEP ZONEN 0 1 ZONEP00 ZONEN00 ZONEP00 ZONEN ZONEP00 ZONEN00 ZONEP00 ZONEN00 Vertical Motion ZONE?? ZONEP ZONEN 0 1 ZONEP00 ZONEN00 ZONEP00 ZONEN00 This enters the setting editing screen Return by pressing a second time Exp Edit using this +000 Execute Fn804 so that the editing results are not erased at power OFF Page 57 of 62 StorE

58 Page 58 of 62

59 Column ZONEP or ZONE or ZONE ZONEN Enters the setting editing screen Press a second time to return Upper 3-digits Lower 5-digits Exp: Move Cursor "+" Modify Setting Modify Setting Page 59 of 62

60 9 JOG Speed Table Editing Screen Displays the row with this symbol JS JOG Speed JSPD JSPD000 JSPD001 JSPD015 Moves between the rows JOG Speed 0 1 JSPD JSPD000 JSPD001 Vertical Motion JOG Speed 0 1 JSPD JSPD000 JSPD001 This enters the setting editing screen Return by pressing a second time Exp Edit using this 000 Execute Fn805 so that the editing results are not erased at power OFF Page 60 of 62 StorE

61 Page 61 of 62

62 Column JSPD JOG Speed Enters the setting editing screen Press a second time to return Upper Lower 5-digits Exp: Move Cursor Modify Setting Modify Setting Page 62 of 62

LE-650s Instruction Manual

LE-650s Instruction Manual LE-650s Instruction Manual LE-650s Controller The LE-650s Controller is a user-friendly panel mounted operator interface for Servo Motor Rotary Cutting machines. Everything required to provide correct

More information

Rotary Knife Controller

Rotary Knife Controller PCM-22 Rotary Knife Controller Information furnished by EMERSON Motion Control is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON Motion Control for its use. EMERSON

More information

RYKO Italia s.r.l. V. Casale Morano Po (Al) t f

RYKO Italia s.r.l. V. Casale Morano Po (Al) t f Italia RYKO Italia s.r.l. V. Casale 43-15025 Morano Po (Al) t.0142 494411 f. 85872 June 30, 2003 ITALIA SERVICE BULLETIN - # 4-013 VFD parameter settings for conveyor equipment with Mitsubishi PLC MACHINES

More information

Electronic Lineshaft With Alignment F7 Drive Software Technical Manual

Electronic Lineshaft With Alignment F7 Drive Software Technical Manual Electronic Lineshaft With Alignment F7 Drive Software Technical Manual Software Number: VSF11005X, Drive Models: CIMR-F7UXXXXXX-064, CIMR-F7UXXXXXX-065 Document Number: TM.F7SW.064, Date: 02/25/2010, Rev:

More information

Dimming actuators GDA-4K KNX GDA-8K KNX

Dimming actuators GDA-4K KNX GDA-8K KNX Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...

More information

PCM-24 Press Feed Controller

PCM-24 Press Feed Controller PCM-24 Press Feed Controller Information furnished by EMERSON EMC is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON EMC for its use. EMERSON EMC reserves the right

More information

Revision 1.2d

Revision 1.2d Specifications subject to change without notice 0 of 16 Universal Encoder Checker Universal Encoder Checker...1 Description...2 Components...2 Encoder Checker and Adapter Connections...2 Warning: High

More information

Single Axis Position Controller

Single Axis Position Controller SERIES P9511 Single Axis Position Controller Compact Construction Simple Go-to operation Integrated Relay Output Integrated Mains Power Supply ELEKTRO-TRADING sp. Z o.o. 44-109 Gliwice, ul. Mechaników

More information

Part No. ENC-LAB01 Users Manual Introduction EncoderLAB

Part No. ENC-LAB01 Users Manual Introduction EncoderLAB PCA Incremental Encoder Laboratory For Testing and Simulating Incremental Encoder signals Part No. ENC-LAB01 Users Manual The Encoder Laboratory combines into the one housing and updates two separate encoder

More information

Chapter 23 Dimmer monitoring

Chapter 23 Dimmer monitoring Chapter 23 Dimmer monitoring ETC consoles may be connected to ETC Sensor dimming systems via the ETCLink communication protocol. In this configuration, the console operates a dimmer monitoring system that

More information

PCM-16 Phase Synchronization Controller Operators Manual

PCM-16 Phase Synchronization Controller Operators Manual PCM-16 Phase Synchronization Controller Operators Manual Information furnished by EMERSON EMC is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON EMC for its use.

More information

American DJ. Show Designer. Software Revision 2.08

American DJ. Show Designer. Software Revision 2.08 American DJ Show Designer Software Revision 2.08 American DJ 4295 Charter Street Los Angeles, CA 90058 USA E-mail: support@ameriandj.com Web: www.americandj.com OVERVIEW Show Designer is a new lighting

More information

User Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT

User Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT Universal Control Unit UC-1-E User Manual General Information Universal Control Unit UC-1 Of Central Lubrication CC DC 24 V 5A / M 15 SL /MK 31 M Z 30 General Information Contents Universal Control Unit

More information

Digital Ratio Controller

Digital Ratio Controller Digital Ratio Controller RSC-406 Control Panel USER S MANUAL RATIO CONTROLLER SPEED RUN PRG ERR RATIO % CH RSC-406 Prelude Thank you for applying our RSC-406 Ratio Controller (abb.406) to you machinery

More information

CDHD Servo Drive. Technical Training Manual. Manual Revision: 2.0 Firmware Version: 1.3.x Software Version: 1.3.x.x

CDHD Servo Drive. Technical Training Manual. Manual Revision: 2.0 Firmware Version: 1.3.x Software Version: 1.3.x.x CDHD Servo Drive Technical Training Manual Manual Revision: 2.0 Firmware Version: 1.3.x Software Version: 1.3.x.x CDHD Introduction Revision History Document Revision Date Remarks 1.0 June 2012 Initial

More information

PCM-22 Rotary Knife Controller Operators Manual

PCM-22 Rotary Knife Controller Operators Manual PCM-22 Rotary Knife Controller Operators Manual Information furnished by EMERSON EMC is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON EMC for its use. EMERSON EMC

More information

Basic Specifications. Driver Model SD12B/15B SD20B SD30B SD30C SD40C SD50C SD75C

Basic Specifications. Driver Model SD12B/15B SD20B SD30B SD30C SD40C SD50C SD75C Basic Specifications Driver Model SD12B/15B SD20B SD30B SD30C SD40C SD50C SD75C Applicable Motor Maximum Current 8.4A 11.4A 17.0A 17.0A 22.8A 28.2A 42.3A Input Power Feedback System single-phase AC180V

More information

Service and Technical Support PLEASE CONTACT YOUR NEAREST DISTRIBUTOR If unknown then fax: 44 (0)

Service and Technical Support PLEASE CONTACT YOUR NEAREST DISTRIBUTOR If unknown then fax: 44 (0) Electro-Magnetic Compatibility (EMC) This product complies with Council Directive 2004/108/EC when installed and used in accordance with the relevant instructions. Service and Technical Support PLEASE

More information

Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T

Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T DM 4-2 T 4940280 DM 8-2 T 4940285 Updated: Jun-16 (Subject to change) Page 1 of 70 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2

More information

Motion Control G7 Drive Software Technical Manual

Motion Control G7 Drive Software Technical Manual Software Number: VSG13306X, Drive Models: CIMR-G7UXXXXX-117 Document Number: TM.G7SW.117, Date: 05/16/08, Rev: 08-05 Motion Control G7 Drive Software Technical Manual Contents: 1.0 Overview... 3 2.0 Changes

More information

Operation/Users Manual

Operation/Users Manual Operation/Users Manual 48-1-21 Please forward any suggestions or errors to: jillas@daumar.es 6- OPERATION MANUAL FOR MACHINE 48 VERSION 48-1-21 This document is made up of the following sections: COMPULSORY

More information

REVISIONS LTR DESCRIPTION DATE APPROVED - Initial Release 11/5/07 MDB A ECR /9/08 MDB

REVISIONS LTR DESCRIPTION DATE APPROVED - Initial Release 11/5/07 MDB A ECR /9/08 MDB REVISIONS LTR DESCRIPTION DATE APPROVED - Initial Release 11/5/07 MDB A ECR 8770 4/9/08 MDB CONTRACT NO. DRAWN BY CHECKED BY APPROVED BY DATE P. Phillips 11/2/07 TITLE M. Bester 11/5/07 SIZE A 2120 Old

More information

DIRECT DRIVE ROTARY TABLES SRT SERIES

DIRECT DRIVE ROTARY TABLES SRT SERIES DIRECT DRIVE ROTARY TABLES SRT SERIES Key features: Direct drive Large center aperture Brushless motor design Precision bearing system Integrated position feedback Built-in thermal sensors ServoRing rotary

More information

THE ASTRO LINE SERIES GEMINI 5200 INSTRUCTION MANUAL

THE ASTRO LINE SERIES GEMINI 5200 INSTRUCTION MANUAL THE ASTRO LINE SERIES GEMINI 5200 INSTRUCTION MANUAL INTRODUCTION The Gemini 5200 is another unit in a multi-purpose series of industrial control products that are field-programmable to solve multiple

More information

MG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV

MG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper

More information

Ocean Sensor Systems, Inc. Wave Staff, OSSI F, Water Level Sensor With 0-5V, RS232 & Alarm Outputs, 1 to 20 Meter Staff

Ocean Sensor Systems, Inc. Wave Staff, OSSI F, Water Level Sensor With 0-5V, RS232 & Alarm Outputs, 1 to 20 Meter Staff Ocean Sensor Systems, Inc. Wave Staff, OSSI-010-002F, Water Level Sensor With 0-5V, RS232 & Alarm Outputs, 1 to 20 Meter Staff General Description The OSSI-010-002E Wave Staff is a water level sensor that

More information

SG-6005xl & SG-6006 PROTOCOL (VER 1.2)

SG-6005xl & SG-6006 PROTOCOL (VER 1.2) SG-6005xl & SG-6006 PROTOCOL (VER 1.2) A protocol for the SG-6005xl & SG-6006 is described below. For RS-232: A null-modem connection between the PC and the SG-6005xl & SG-6006 is required, and data is

More information

Show Designer 3. Software Revision 1.15

Show Designer 3. Software Revision 1.15 Show Designer 3 Software Revision 1.15 OVERVIEW... 1 REAR PANEL CONNECTIONS... 1 TOP PANEL... 2 MENU AND SETUP FUNCTIONS... 3 CHOOSE FIXTURES... 3 PATCH FIXTURES... 3 PATCH CONVENTIONAL DIMMERS... 4 COPY

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

CT340 and CT641. High Performance Low Cost Controller for Rotating Cutters and Printing Rolls. Operating Instructions

CT340 and CT641. High Performance Low Cost Controller for Rotating Cutters and Printing Rolls. Operating Instructions CT340 and CT641 High Performance Low Cost Controller for Rotating Cutters and Printing Rolls Precision controller for Rotating Cutters and Printing Rolls Easy parameter setting and immediately ready to

More information

Transmitter Interface Program

Transmitter Interface Program Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following

More information

Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.

Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema

More information

Ocean Sensor Systems, Inc. Wave Staff III, OSSI With 0-5V & RS232 Output and A Self Grounding Coaxial Staff

Ocean Sensor Systems, Inc. Wave Staff III, OSSI With 0-5V & RS232 Output and A Self Grounding Coaxial Staff Ocean Sensor Systems, Inc. Wave Staff III, OSSI-010-008 With 0-5V & RS232 Output and A Self Grounding Coaxial Staff General Description The OSSI-010-008 Wave Staff III is a water level sensor that combines

More information

Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units)

Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) All seven laser types provide ample long distance, for the Diffuse Reflective Model 1.000 mm and for Retroreflective

More information

TV Character Generator

TV Character Generator TV Character Generator TV CHARACTER GENERATOR There are many ways to show the results of a microcontroller process in a visual manner, ranging from very simple and cheap, such as lighting an LED, to much

More information

Netzer AqBiSS Electric Encoders

Netzer AqBiSS Electric Encoders Netzer AqBiSS Electric Encoders AqBiSS universal fully digital interface Application Note (AN-101-00) Copyright 2003 Netzer Precision Motion Sensors Ltd. Teradion Industrial Park, POB 1359 D.N. Misgav,

More information

Preface 11 Key Concept 1: Know your machine from a programmer s viewpoint 17

Preface 11 Key Concept 1: Know your machine from a programmer s viewpoint 17 Table of contents Preface 11 Prerequisites 11 Basic machining practice experience 11 Math 12 Motivation 12 Controls covered 12 What about conversational controls? 13 Controls other than Fanuc 13 Limitations

More information

Series 1100 ColorTS Servo Manual Registration System

Series 1100 ColorTS Servo Manual Registration System Series 1100 ColorTS Servo Manual Registration System 400 Oser Avenue Hauppauge NY 11788 631 434 3700 phone 631 434 3718 fax www.empregister.com December 14, 2005 TABLE OF CONTENTS TABLE OF CONTENTS...

More information

Night Hawk Firing System User s Manual

Night Hawk Firing System User s Manual Firmware Version 2.53 Page 1 of 37 Table of Contents Features of the Night Hawk Panel... 4 A reminder on the safe use of Electronic Pyrotechnic Firing Systems... 5 Night Hawk Firing Panel Controls... 6

More information

FS340 and FS641. High Performance Low Cost Controller for Flying Shears and Saws

FS340 and FS641. High Performance Low Cost Controller for Flying Shears and Saws control motion interface motrona GmbH Zwischen den Wegen 32 78239 Rielasingen - Germany Tel. +49 (0)7731-9332-0 Fax +49 (0)7731-9332-30 info@motrona.com www.motrona.com FS340 and FS641 High Performance

More information

Kramer Electronics, Ltd. USER MANUAL. Model: FC Analog Video to SDI Converter

Kramer Electronics, Ltd. USER MANUAL. Model: FC Analog Video to SDI Converter Kramer Electronics, Ltd. USER MANUAL Model: FC-7501 Analog Video to SDI Converter Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your Analog Video to SDI Converter 3 5 Using Your

More information

Revision Protocol Date Author Company Description January Paul DOS REMEDIO S. Imagine Communications

Revision Protocol Date Author Company Description January Paul DOS REMEDIO S. Imagine Communications PRODUCT ADC TOPIC ODETICS TCS-90 CART MACHINE DATE: January 25, 2001 REVISION HISTORY Revision Protocol Date Author Company Description 1.1 25 January 2001 Paul DOS REMEDIO S Imagine Communications New

More information

Main Display (Red) Displays the incident light level or the function name.

Main Display (Red) Displays the incident light level or the function name. E3X-DA-S/E3X-MDA Operation Reference Main Display (Red) Displays the incident light level or the function name. Sub-Display (Green) Displays the threshold and function settings. Operation Keys Used to

More information

icontrol Integrated Control System Operator s Card

icontrol Integrated Control System Operator s Card icontrol Integrated Control System Operator s Card WARNING: Allow only qualified personnel to operate this equipment. Follow the safety instructions in this document and all other related documentation.

More information

ZU 252. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface

ZU 252. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface control motion interface ZU 252 Incremental Counter Module With Analogue Output and Serial Interface Counter suitable for quadrature signals (A/B, 90º) as well as single channel inputs Counting inputs

More information

IT-100 INSTRUCTION MANUAL

IT-100 INSTRUCTION MANUAL IT-00 INSTRUCTION MANUAL I CONTENTS Ⅰ. INTRODUCTION... 日本語 Ⅱ. SETTING... 2. INITIAL SETTING... 2 -. Machine head settings...2-2. Adjusting the machine head angle (direct-drive motor type sewing machine

More information

LE-650 Instruction Manual

LE-650 Instruction Manual LE-650 Instruction Manual LE-650 Controller The LE-650 Controller is a user-friendly panel mounted operator interface for Rotary Cutting machines, Planetary Cutters and Saws. Everything required to provide

More information

For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted.

For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted. For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted. N223 Reliance Electric s MD60 AC Drive is ready to operate out-of-the-box!

More information

Introduction Display...1 Mounting...1 Firmware Version...2. ADL Operation... 3

Introduction Display...1 Mounting...1 Firmware Version...2. ADL Operation... 3 MoTeC MDD User Manual Contents Introduction... 1 Display...1 Mounting...1 Firmware Version...2 ADL Operation... 3 1. Full ADL Display...4 2. Gain Loss Layout for ADL...6 3. Large Numeric Layout for ADL...8

More information

A summary of all menu lines available in self-diagnostic mode is shown below.

A summary of all menu lines available in self-diagnostic mode is shown below. 1057-03 rev A 10/08/02 Page 9/33 4. CLUSTER DIAGNOSTICS 4.1. Test at Turn On When ignition voltage is first applied to the cluster, all the tell-tales, except turn signals, turn on for 2 seconds, then,

More information

Kramer Electronics, Ltd. USER MANUAL. Model: VS x 1 Sequential Video Audio Switcher

Kramer Electronics, Ltd. USER MANUAL. Model: VS x 1 Sequential Video Audio Switcher Kramer Electronics, Ltd. USER MANUAL Model: VS-120 20 x 1 Sequential Video Audio Switcher Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Installing the VS-120 in

More information

Understanding VFD. Variable Frequency Drive. nfi. nfi

Understanding VFD. Variable Frequency Drive. nfi. nfi Understanding VFD Variable Frequency Drive Practical Demonstration of VFD Delta- M Series 1.5 KW I/P: 230V 1/3 Phase O/P: 230 3 Phase VFD Status Screen Motor OFF Command Freq. Parameters Direction Amperes

More information

Kramer Electronics, Ltd. USER MANUAL. Models: VS-626, 6x6 Video / Audio Matrix Switcher VS-828, 8x8 Video / Audio Matrix Switcher

Kramer Electronics, Ltd. USER MANUAL. Models: VS-626, 6x6 Video / Audio Matrix Switcher VS-828, 8x8 Video / Audio Matrix Switcher Kramer Electronics, Ltd. USER MANUAL Models: VS-626, 6x6 Video / Audio Matrix Switcher VS-828, 8x8 Video / Audio Matrix Switcher Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1

More information

Standard signal metering in wall-mounting case

Standard signal metering in wall-mounting case User manual AKV-2VR4C Standard signal metering in wall-mounting case Technical features: Digit height: 20 mm Colour: red Range of display: -999 9999 Wall-mounting case: black, made of ABS-plastic Protection

More information

ZU 251. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface

ZU 251. Incremental Counter Module With Analogue Output and Serial Interface. Operating Instructions. control motion interface control motion interface motrona GmbH Zwischen den Wegen 32 78239 Rielasingen - Germany Tel. +49 (0)7731-9332-0 Fax +49 (0)7731-9332-30 info@motrona.com www.motrona.com ZU 251 Incremental Counter Module

More information

IEFIS G3 Inputs, outputs and Alarms

IEFIS G3 Inputs, outputs and Alarms IEFIS G3 Inputs, outputs and Alarms Document version: 2, May 2016 User manual on the use and configuration of the analog and digital inputs and digital outputs as well as Alarm setup and use. Related equipement:

More information

DAAB DB409 INSTRUCTION MANUAL FOR THE VFD-EL FREQUENCY CONVERTER. For the DAAB EP104 automatic control system with software version 4.

DAAB DB409 INSTRUCTION MANUAL FOR THE VFD-EL FREQUENCY CONVERTER. For the DAAB EP104 automatic control system with software version 4. DAAB DB409 INSTRUCTION MANUAL FOR THE VFD-EL FREQUENCY CONVERTER For the DAAB EP104 automatic control system with software version 4.07 Revision: 12 FAAC Nordic AB BOX 125, SE-284 22 PERSTORP SWEDEN, +46

More information

User Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.

User Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5. EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended

More information

E3C-LDA. Phone: Fax: Web: - Operating Procedures: Photoelectric Sensors

E3C-LDA. Phone: Fax: Web:  -   Operating Procedures: Photoelectric Sensors E3C-LDA Operating Procedures: Photoelectric Sensors 1 Setting the Operation Mode The operation mode is set with the. Operation mode Operation Light ON L-ON Dark ON D-ON L (Factory-set) D *Advanced Twin-output

More information

Smart-Encoder : Optical Incremental

Smart-Encoder : Optical Incremental 1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables

More information

SM-Universal Encoder Plus. EF User Guide. Solutions module for Unidrive SP

SM-Universal Encoder Plus. EF   User Guide. Solutions module for Unidrive SP EF www.controltechniques.com User Guide SM-Universal Encoder Plus Solutions module for Unidrive SP Part Number: 0471-0005-06 Issue Number: 6 Version: 04.xx.xx General Information The manufacturer accepts

More information

AF-300 E11 Adjustable Frequency Drive

AF-300 E11 Adjustable Frequency Drive AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed

More information

INTRODUCTION INTRODUCTION

INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION This manual describes the 5740X-400/401 Strider Speed Control, and is intended to be a guide in the installation and operation of the control. This first section, the INTRODUCTION,

More information

Sigma 1 - Axis Servo Motor and Cables - Troubleshooting Guide

Sigma 1 - Axis Servo Motor and Cables - Troubleshooting Guide LAST UPDATED: 12/21/2018 Introduction Press [POWER OFF]. Set the main circuit breaker to the OFF position. Wait until the high voltage LED on the vector drive is completely off before disconnecting any

More information

FRQM-2 Frequency Counter & RF Multimeter

FRQM-2 Frequency Counter & RF Multimeter FRQM-2 Frequency Counter & RF Multimeter Usage Instructions Firmware v2.09 Copyright 2007-2011 by ASPiSYS Ltd. Distributed by: ASPiSYS Ltd. P.O.Box 14386, Athens 11510 (http://www.aspisys.com) Tel. (+30)

More information

Smart Hawk Firing System User s Manual

Smart Hawk Firing System User s Manual Firmware Version 3.09 Page 1 of 57 Table of Contents A reminder on the safe use of Electronic Pyrotechnic Firing Systems... 4 Description... 5 Common Features of the Smart Hawk Panel... 6 Features of the

More information

Certification Test elm.mp2600iec.01.hardwareoverview

Certification Test elm.mp2600iec.01.hardwareoverview Date: Student Name: Company Name: Address: Phone: email: Taking the Each question will have only one correct answer. Please record all answers on this answer sheet. The order of the questions in the test

More information

MF-PFT. Programmable differential pressure transmitter for pressure or flow measurement and control. DIL1 Output/Utsignal

MF-PFT. Programmable differential pressure transmitter for pressure or flow measurement and control. DIL1 Output/Utsignal Operating and installation manual Programmable differential pressure transmitter for pressure or flow measurement and control. MF-PFT Instruction : Mi-202gb_060907 NOTE! Read the entire instruction carefully

More information

Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters

Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Written By: Colin Langridge Issue: Draft Date: 03 rd July 2008 1 Date: 29 th July 2008 2 Date: 20 th August 2008 3 Date: 02 nd

More information

THE ASTRO LINE SERIES GEMINI 4000 INSTRUCTION MANUAL

THE ASTRO LINE SERIES GEMINI 4000 INSTRUCTION MANUAL THE ASTRO LINE SERIES GEMINI 4000 INSTRUCTION MANUAL INTRODUCTION The Gemini 4100 and 4200 are both units in a multi-purpose series of industrial control units that are field-programmable to solve multiple

More information

Universal DiSEqC controller USER MANUAL

Universal DiSEqC controller USER MANUAL Universal USER MANUAL SAT CONTROL 1. INTRODUCTION Satellite television is one of most favourite and popular medium in today s world. But reception 36.000 km away from the sky is more technically difficult.

More information

Universal DiSEqC controller USER MANUAL SAT CONTROL

Universal DiSEqC controller USER MANUAL SAT CONTROL USER MANUAL SAT CONTROL SAT CONTROL Dear customer, If you have not been able to put the system into operation or have problems installing it, call the Technical Assistance phone as indicated on the first

More information

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630) Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections

More information

Hardware & software Specifications

Hardware & software Specifications Hardware & software Specifications Réf : PRELIMINARY JUNE 2007 Page 2 of 17 1. PRODUCT OVERVIEW...3 2. TERMINOLOGY...4 A. THE FRONT PANEL...4 B. THE REAR PANEL...5 3. SCREENS DESCRIPTION...5 A. MAIN SCREEN

More information

Single Axis Position Controller

Single Axis Position Controller SERIES P8721-000-P Single Axis Position Controller Closed loop Analogue with +/- 10v control and 2 or 3 switched speed operation 200 Line programme Manual Operation Single Operation Auxiliary functions

More information

Modbus Register Tables for SITRANS RD300 & WI100

Modbus Register Tables for SITRANS RD300 & WI100 AG021414 Modbus Register Tables for SITRANS RD300 & WI100 WARNING: As is typical with most instruments, the addition of serial communications carries an inherent risk; it allows a remote operator to change

More information

RM5 User Manual Warnings.

RM5 User Manual Warnings. A RM5 User Manual Warnings. Danger Hazardous High Voltage Ground the control before servicing Remove all power and wait 10 minutes Verify that no voltage is present Failure to comply will result in death

More information

Kramer Electronics, Ltd. USER MANUAL. Model: VS-201YC. 2x1 s-video Switcher

Kramer Electronics, Ltd. USER MANUAL. Model: VS-201YC. 2x1 s-video Switcher Kramer Electronics, Ltd. USER MANUAL Model: VS-201YC 2x1 s-video Switcher Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VS-201YC 2x1 s-video Switcher 4 5

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

Owner s Manual. Sat-Meter MSK 15. Order No.:

Owner s Manual. Sat-Meter MSK 15. Order No.: Owner s Manual Sat-Meter MSK 15 Order No.: 217 100 13 Thank you for choosing our latest and most innovative satellite meter. It has been designed and manufactured to a very high standard and offers a UNIQUE

More information

Operating Instructions

Operating Instructions Operating Instructions HAEFELY TEST AG KIT Measurement Software Version 1.0 KIT / En Date Version Responsable Changes / Reasons February 2015 1.0 Initial version WARNING Introduction i Before operating

More information

User interface. Abbreviations / Meanings

User interface. Abbreviations / Meanings RG66012649 User interface Contents Page Abbreviations / Meanings Abbreviations / meanings... 2 Button Identification... 3 On-screen Indicators... 4 Quick Start... 5 Setting the time and day... 5 Changing

More information

LAX_x Logic Analyzer

LAX_x Logic Analyzer Legacy documentation LAX_x Logic Analyzer Summary This core reference describes how to place and use a Logic Analyzer instrument in an FPGA design. Core Reference CR0103 (v2.0) March 17, 2008 The LAX_x

More information

Data Acquisition Networks. Installing and Configuring the DM01 Hardware

Data Acquisition Networks. Installing and Configuring the DM01 Hardware Data Acquisition Networks Installing and Configuring the DM Hardware What is the DM? D.A.N developed the DM-2 to capture 6 analogue measurements and pulse count in the field. The Average, Maximum and Minimum

More information

UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell

UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load

More information

2. Using LCD Digital Operator

2. Using LCD Digital Operator 2. Using LCD Digital Operator Functions of LCD digital operator JNEP-31(V) LCD digital operator has 2 modes: mode and mode. When the inverter is stopped, mode or mode can be selected by pressing the. In

More information

SCENEMASTER 3F QUICK OPERATION

SCENEMASTER 3F QUICK OPERATION SETTING PRESET MODE SCENEMASTER 3F QUICK OPERATION 1. Hold [RECORD], and press [CHNS] (above the Channels Master) to set Scenes, Dual, or Wide mode. WIDE MODE OPERATION In Wide mode, both CHANNELS and

More information

ELCOM. Part Application Instruction. Release (V S 0.5) YS Kim S Jeong. OS Program Change to V S1.5 YS Kim S Jeong

ELCOM. Part Application Instruction. Release (V S 0.5) YS Kim S Jeong. OS Program Change to V S1.5 YS Kim S Jeong Page 1/23 Door System(S-type) Rev. No. 0 1 2 3 Revision History Date Aug. 2004 Jun 2006 Sep 2006 Oct 2008 Revision Contents Prepared by Checked by Release (V S 0.5) YS Kim S Jeong OS Program Change to

More information

USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.1

USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.1 by USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.1 www.aeroforcetech.com Made in the USA! WARNING Vehicle operator should focus primary attention to the road while using the Interceptor. The information

More information

ED3. Digital Encoder Display Page 1 of 13. Description. Mechanical Drawing. Features

ED3. Digital Encoder Display Page 1 of 13. Description. Mechanical Drawing. Features Description Page 1 of 13 The ED3 is an LCD readout that serves as a position indicator or tachometer. The ED3 can display: Speed or position of a quadrature output incremental encoder Absolute position

More information

Technical data. General specifications. Indicators/operating means

Technical data. General specifications. Indicators/operating means Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists

More information

SignalTap Plus System Analyzer

SignalTap Plus System Analyzer SignalTap Plus System Analyzer June 2000, ver. 1 Data Sheet Features Simultaneous internal programmable logic device (PLD) and external (board-level) logic analysis 32-channel external logic analyzer 166

More information

MXS Strada USER GUIDE

MXS Strada USER GUIDE MXS Strada USER GUIDE AiM TECH Srl. Via Cavalcanti, 8 20063 Cernusco S/N (MI) Italia Tel. (+39) 02.9290571 Made in Italy www.aim-sportline.com MXS Strada 01. INTRODUCTION 02. WHAT IS IN THE KIT 03. LAYOUT

More information

Sensopress LCD Special English

Sensopress LCD Special English Sensopress LCD Special English edition 2-09/2004 - code 5878 1/16 Sensopress LCD with sensor Power Supply Voltage 117 V~ 50 60 Hz 230V~ 50 60 Hz Code TSL00X0100 TSL00Y0100 Consumption 5,5 VA Display LCD

More information

SM-UNIVERSAL ENCODER PLUS

SM-UNIVERSAL ENCODER PLUS M 3948 en - 09.2005 / a This manual is to be given to the end user SK2 Solutions Module 15-way D-type...... Error detection x.17 x.16 Terminaison disable Parameter Encoder turns x.09 comms to sine x.10

More information

TABLE OF CONTENTS. Instructions:

TABLE OF CONTENTS. Instructions: TABLE OF CONTENTS Instructions: 1 Overview 1 2 Main technical parameters 1 3 Display and keyboard 2 3.1 Display Window 2 3.2 Indicator 4 4. Operation 4 4.1 Power 4 4.2 Zero 4 Modified 4 4.3 Modified 4

More information

D R M A X - 2 DDS FREQUENCY SYNTHESIZED DRM MW TRANSMITTER. User s Guide (Please read carefully before using for the first time!)

D R M A X - 2 DDS FREQUENCY SYNTHESIZED DRM MW TRANSMITTER. User s Guide (Please read carefully before using for the first time!) D R M A X - 2 DDS FREQUENCY SYNTHESIZED DRM MW TRANSMITTER User s Guide (Please read carefully before using for the first time!) Copyright 2018 by ASPiSYS Ltd. DRMAX2 is a low-power DRM MW transmitter.

More information

USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.0

USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.0 by USER MANUAL FOR THE ANALOGIC GAUGE FIRMWARE VERSION 1.0 www.aeroforcetech.com Made in the USA! WARNING Vehicle operator should focus primary attention to the road while using the Interceptor. The information

More information