Sky HD+ / Sky Q Module

Transcription

1 Sky HD+ / Sky Q Module Installation and Usage Guide Revision: Date: Author(s): Saturday, November 11, 2017 Richard Mullins

2 Page 1 Contents Overview 2 Changelog 2 Installation 3 1. Import the TCM in to accelerator 3 2. Add the Sky module to Accelerator 4 3. Add the network setting for the Sky module 5 4. Add the licence code 6 System Parameters 7 Model 7 Debug 7 Region Settings 8 Setting the region 8 Changing the region 8

3 Page 2 Overview The URC Sky module provides both direct control over your Sky+ HD or Sky Q set top box and a channel listing that lets you see whats currently playing, and whats coming next for each channel. The GUI layout will change if you have a Sky Q box to suit the different controls that are available for Sky Q. Changelog Version Initial release

4 Page 3 Installation 1. Import the TCM in to accelerator The zip file that included this documentation has the TCM file you will need to import. Go to the file menu, select import TCM Files and load the provided file. (for more information check The first step is to download and extract the module from the zip file. It doesn t matter where you store the file but we advise keeping them together. Click on the file menu and select Import TCM Files. find the Sky TCM file you have downloaded select it and click on open Finally, double check that the module details are correct and hit import.

5 Page 4 2. Add the Sky module to Accelerator This module is designed to work with all of your Sky devices using a single module so you will only need to add it to one room. Go to Step 4. Add Other Devices and Add Selected Modules. Step 1 - select the room for the module Step 2 - Select My Step 3 - Select IP Database Step 4 - Select SAT Step 5 - Select SKY Step 6 - Select your model of Sky STB from the list

6 Page 5 3. Add the network setting for the Sky module The Sky module requires an IP address and a port number to function. You can obtain the IP addressby pressing the services button on the remote, then 0 and finally 5. The IP address is listed as IP Adddress of Sky box in the menu. The default port number for the Sky HD+ is and for the Sky Q its 5900

7 Page 6 4. Add the licence code The Sky module needs a licence to work. To add the licence go to Step 11 in Accelerator and select the Two Way Module Settings option. In the system parameter Information box enter your licence code. You will now need to setup the accounts required to use this module and enter those details once you have them in this parameters field.

8 Page 7 System Parameters The Sky module requires only a licence code to work. It also accepts one additional parameters that is used to enable the debugging mode. All system parameters are entered in the following format KEY=VALUE The following table details the system parameters that work with this module. KEY PARAMETER LICENCE Licence code to register the driver MODEL Q for Sky Q STB, otherwsie omit. DEBUG Puts the module in to it s debug mode Model The MODEL parameter can be used to force the seelction of the module to use Sky Q instead of th Sky+ HD (the default). If you use 5900 for the pot it will default to Sky Q as well but this makes sure it chooses the correct STB type. Debug If the DEBUG parameter is present and set to ON (DEBUG=ON) then detailed log files will be written to the base station. The log files can be fetched by connecting to the base station with FTP and looking in the /Common/Sky folder. This will cause additional load on the processor so it should be left off unless you are asked to turn it on.

9 Page 8 Region Settings Setting the region When you load the module for the first time it will ask you to select a region for the channels to be loaded from. Choose a region from the list and hit save when your done. The currently selected region will have an active radio button on the right. It is also shown at the bottom of the page as Current Region. Once you have the region it will be saved to the URC base station so you on ly need to do this once. Changing the region If the base station need to be changed in future you can change it at any time by selecting the options menu from the Home page and clicking the Set Region button. Find the new region, select it and hit save and the channels will be refreshed for the new region.

10 Page 9