Setup Guide. AJA Video Systems LUT-box. Rev. 1.2
|
|
|
- Virgil Hodge
- 6 years ago
- Views:
Transcription
1 Setup Guide AJA Video Systems LUT-box Rev. 1.2
2 Introduction CalMAN Required Version: CalMAN takes advantage of the AJA Video Systems LUT-box features to calibrate a video display with a 10-bit 17x17x17 3D cube lookup table (LUT) for SMPTE video level signals. This setup guide assists you in calibrating the AJA LUT-box with the CalMAN Color Cube workflow. Version or newer CalMAN Recommended Workflow: Color Cube (3D LUT) AJA LUT-box Required Firmware: Version 2.3 or newer AJA LUT-box Control Connection: USB mini cable AJA LUT-box USB Device Driver Loaded with AJA Mini-Config software 2
3 Creating a 3D LUT Display Calibration File for the AJA LUT-box CalMAN creates a 3D LUT display calibration file for the AJA LUT-box without immediately loading the file into the LUT-box. CalMAN creates a.cube file with the proper data format for later loading into the LUT-box (as detailed below). The AJA LUT-box does not need to be available during this display calibration and file creation process. The AJA LUT-box, with firmware version 2.3 or 2.4, supports 3D LUTs only for SMPTE range operation. The AJA Mini-Config software is used to load the 3D LUT file into the AJA LUTbox. The Input tab and HDMI Output tab or SDI Output tab in the utility should be set to SMPTE. When connected to an AJA LUT-box with firmware version 2.3 or higher, the LUT tab in the AJA Mini-Config utility provides the In/Out Color Range option for Full or SMPTE. This LUT range option must be set to Full to support a 3D LUT. Figure 1. AJA Mini-Config software for setting In/Oout Color Range to Full. 3
4 The Color Cube workflow in CalMAN is used to create 3D display calibration LUTs. In the CalMAN main menu, select Open Workflow Template / Color Cube (3D LUT). Proceed through the instructions on each step of the Color Cube workflow, using the following notes for AJA LUT-box specifics. Initial Setup section In the Initial Setup section of the Color Cube workflow, step through the following pages: Figure 2. CalMAN Color Cube (3D LUT) workflow outline. Session Setup - Meter Connect Connect your color meter to the CalMAN computer. On the Session Setup page, click the Find Meter button to connect your meter. Under the Target Display Type drop down, select the display type that is being calibrated. 4
5 Session Setup - Source Connect On the Session Setup page, click the Find Source button. On the Source dialog, select your desired test pattern source. Session Setup - LUT Device Setup On the Session Setup page, click the Find 3D LUT Device button. On the Display dialog, under Manufacturer, select AJA - Lut box (.cube). Under Model, select SpectraCal - Cube Generator (3D LUT). Click Connect. Figure 3. CalMAN Find Display dialog for connecting to the CalMAN Cube Generator function. Display Pre-Test section In the Display Pre-Test section of the Color Cube workflow, you can measure the performance of a display before you calibrate it, on the Gamma & ColorChecker page and on the Advanced Linearity page. If the Performance Analysis page indicates any red lights for display performance, you may wish to optimize the display s picture controls before creating a 3D calibration LUT. Click the Display Optimization button to proceed to that workflow section. Otherwise, click the Calibrate Cube LUT button to proceed directly to the Display Calibration section. Display Optimization section To optimize the display s picture controls before creating a 3D calibration LUT, advance through the adjustment pages in the Display Optimization section of the workflow. 5
6 Display Calibration section In the Display Calibration section of the Color Cube workflow, there are provisions for calibrating both a 1D RGB LUT (1D Ramp LUT page) and a 3D cube LUT (3D Cube LUT page). When we are calibrating an AJA LUT-box with a 3D LUT, we will skip the 1D Ramp LUT page (1D RGB LUT) and use only the 3D Cube LUT page. 1D Ramp LUT page Skip over this page when creating a 3D LUT file for an AJA LUT-box, since we do not need to create a 1D LUT. 3D Cube LUT page 1. On the 3D Cube LUT page, click the AutoCal button (rotating arrows) at the right end of the meter action buttons. The AutoCal Setup dialog then appears (see below). Figure 4. CalMAN AutoCal Setup dialog for selecting 3D LUT creation options. 2. Under File Format, select AJA Lut box (.cube). 6
7 3. Under Output Cube Size, select 17 points Under File Path, select the desired directory path and provide a name for the LUT file that CalMAN will create (e.g. monitor ID and date). 5. Under Calibration Type, select the desired type of 3D LUT calibration process. IR Profile (time based): Creates the best quality display calibration 3D LUT possible in the selected period of time. You select how much display quality you have time for, from 30 minutes to maximum display quality (6,000 points max). Uses Intelligent Resolution Profiling to search out the most nonlinear color space areas and correct those first. IR Profile (point based): Creates the best quality display calibration 3D LUT possible with the selected number of measurement points (1,000-10,000 points). Uses Intelligent Resolution Profiling to search out the most nonlinear color space areas and correct those first. Lightning LUT: Creates a display calibration 3D LUT in five minutes or less. Produces a very high quality result on professional displays with moderate linearity. Displays with significant nonlinearity may produce marginal results. 6. Under Video Range, select SMPTE (16-235) if you are calibrating a video display that clips signal values above reference white. 7. Click OK. When the AutoCal 3D LUT calibration completes, CalMAN automatically writes the optimized 17x17x17 LUT calibration file to the previously selected location. You are done creating a display calibration 3D LUT for the AJA LUTbox. You can now skip to the Loading a 3D LUT file to the AJA LUT-box section below to load the LUT into the LUT-box. Display Validation section After you have loaded the new 3D LUT into the AJA LUT-box, you can return to this Display Validation section of the Color Cube workflow to test the performance of the display, to validate the accuracy of the display when using the 3D calibration LUT. You can switch back to the Test/Document Display page to compare to the pre-calibration performance. 7
8 Loading a 3D LUT file to the AJA LUT-box To load the CalMAN 3D LUT file into an AJA LUT-box: 1. Install the AJA Mini-Config software on your Mac or PC. 2. Connect the LUT-box to the PC or Mac via the supplied USB cable. Connect the external power supply to the LUT-box. 3. Run the AJA Mini-Config software. 4. If not already done, on the Mini-Config software Input and Output tabs, select the appropriate signal settings. 5. On the Mini-Config software LUT tab, select On for Enable 3D LUT. 6. Under Apply Slot, select Slot 1 or Slot Click on the name box for 3D LUT 1 or 3D LUT 2 to open a file browser. 8. Navigate to the location of the desired LUT file. 9. Select the LUT file and click Open. 10. Click the associated Write Slot 1 or Write Slot 2 button on the right. The LUT data will be written to the selected slot. Done: The selected 3D LUT file is now contained in the AJA LUT-box. If you wish to validate the accuracy of the display when using the 3D calibration LUT, you can return to the Display Validation section of the Color Cube workflow. 8
9 About / Contact About Portrait Displays Portrait Displays, Inc., since 1993, is a leading application software provider (ASP) for PC, smartphone, and tablet displays. The Portrait Displays team now includes SpectraCal, the world s leading provider of video display calibration software. The combined companies offer value-added, feature-rich solutions to both OEM display manufacturers and end users seeking improved accuracy and manageability of their displays. Portrait Displays, an Intel Capital Portfolio company, is a private corporation with headquarters in Pleasanton, California, USA with representatives in Europe, Taiwan, China, Japan, and Korea. Contact Us Submit a Technical Support Request: spectracal.com sales@spectracal.com Portrait Displays, Inc Owens Drive Pleasanton, CA USA portrait.com 9
Setup Guide. Teradek COLR. Rev. 1.1
Setup Guide Teradek COLR Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the Teradek COLR features to calibrate a video display with a 10-bit 33x33x33 3D cube lookup table (LUT).
Setup Guide. Dolby PRM Rev. 1.1
Setup Guide Dolby PRM-4200 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Dolby PRM-4200 monitor.
Setup Guide. Panasonic BT-4LH310. Rev. 1.1
Setup Guide Panasonic BT-4LH310 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Panasonic 4LH310
Setup Guide. Flanders Scientific BoxIO. Rev. 1.1
Setup Guide Flanders Scientific BoxIO Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the features of the Flanders Scientific BoxIO advanced color management device to calibrate
Setup Guide. Blackmagic Design Teranex Mini. Rev. 1.3
Setup Guide Blackmagic Design Teranex Mini Rev. 1.3 Introduction CalMAN takes advantage of the internal 3D LUT feature of the Blackmagic Design Teranex Mini to calibrate a video display with a 33x33x33
Setup Guide. Pandora Pluto. Color Management System. Rev. 1.1
Setup Guide Pandora Pluto Color Management System Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Pandora Pluto features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Blackmagic Design HDLink Pro. Rev. 1.1
Setup Guide Blackmagic Design HDLink Pro Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Blackmagic Design HDLink Pro features to calibrate a video display with a 10-bit
Setup Guide. SpectraCal ColorBox. (also eecolor) Image Calibration Processor. Rev. 1.1
Setup Guide SpectraCal ColorBox (also eecolor) Image Calibration Processor Rev. 1.1 Introduction CalMAN takes advantage of the SpectraCal ColorBox (also eecolor) processor features to calibrate a video
Setup Guide. Konvision monitors. Rev. 1.0
Setup Guide Konvision monitors Rev. 1.0 Introduction CalMAN Display Calibration Software can automatically create multiple optimized calibration 3D LUTs for the entire line of Konvision monitors, with
Setup Guide. EIZO Monitors. Rev. 1.4
Setup Guide EIZO Monitors Rev. 1.4 Introduction CalMAN Display Calibration Software can automatically create optimized calibration 1D or 3D LUTs for EIZO monitors equipped with a self-calibration sensor.
Setup Guide. CalMAN Client for SCRATCH. Rev. 1.1
Setup Guide CalMAN Client for SCRATCH Rev. 1.1 Introduction CalMAN Required Software Version: CalMAN Display Calibration Software interfaces directly with ASSIMILATE SCRATCH software through the CalMAN
Setup Guide. Creating 3D LUTs. CalMAN Overview. Rev. 1.1
Setup Guide Creating 3D LUTs CalMAN Overview Rev. 1.1 Introduction This is an overview guide for using the Intelligent Resolution Profiling (IRP), Lightning LUT, and 3D LUT Retargeting technologies that
Setup Guide. Quantum Data 70x/80x Series. Video Generators. Rev. 1.1
Setup Guide Quantum Data 70x/80x Series Video Generators Rev. 1.1 Introduction CalMAN Required Version The Quantum Data 70x and 80x Video Generator test patterns can be automatically controlled by CalMAN
Setup Guide. CalMAN ColorMatch. Rev. 1.1
Setup Guide CalMAN ColorMatch Rev. 1.1 Introduction Thank you for your interest in using the free version of CalMAN ColorMatch. If you haven t already received your free ColorMatch license, follow this
Setup Guide. SpectraCal MobileForge. Pattern Generator App. Rev. 1.6
Setup Guide SpectraCal MobileForge Pattern Generator App Rev. 1.6 Introduction MobileForge is a free pattern generator app for ios, Android, and Fire TV devices. MobileForge generates accurate test patterns
Setup Guide. Panasonic AS800/AX800/AX Models. Rev. 1.1
Setup Guide Panasonic AS800/AX800/AX900 2014 Models Rev. 1.1 Introduction CalMAN Recommended Workflows For the Panasonic models listed above, CalMAN automatically calibrates the display s two point grayscale
Setup Guide. Panasonic. VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.
Setup Guide Panasonic VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction This guide designed as a reference to the Sony BRAVIA Workflow, used to calibrate Sony's upper-end Android TVs including Z9D and subsequent LCD and OLED models.
Setup Guide. Murideo SIX-G. Digital Video Generator. Rev. 1.6
Setup Guide Murideo SIX-G Digital Video Generator Rev. 1.6 Introduction The Murideo SIX-G digital video generator can be automatically controlled by the CalMAN Display Calibration Software to produce measurement
Setup Guide. Panasonic. VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1
Setup Guide Panasonic VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VT30/GT30/DT30/VT50/GT50/WT50/DT50
Setup Guide. Panasonic VX200/VX300/BT300. Plasma Displays. Rev. 1.1
Setup Guide Panasonic VX200/VX300/BT300 Plasma Displays Rev. 1.1 Panasonic VX200/VX300 (BT300 below) CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VX200/VX300 display s two
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction CalMAN can guide the calibration of a 2018 LG Super UHD LCD or an 2018 LG OLED TV in HDTV SDR, HDR10, and Dolby Vision modes. This assures the most accurate rendering
Setup Guide. X-Rite i1display. Retail and OEM. Rev. 1.2
Setup Guide X-Rite i1display Retail and OEM Rev. 1.2 Introduction CalMAN supports the X-Rite i1 Display colorimeter (Retail and OEM) for measuring many display types, including CCFL, LED, plasma, and also
Setup Guide. AV Foundry VideoForge HDMI. Digital Video Generator. Rev. 1.1
Setup Guide AV Foundry VideoForge HDMI Digital Video Generator Rev. 1.1 Introduction The AV Foundry VideoForge HDMI Digital Video Generator is a versatile, high value test pattern generator with a field-ruggedized
Setup Guide. Panasonic. VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1
Setup Guide Panasonic VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1 Introduction CalMAN automatically calibrates the Panasonic VT30/DT30/D30/VT50/WT50 US/NA model display s two point grayscale controls,
Setup Guide. Color Volume Analysis Workflow. Rev. 1.2
Setup Guide Color Volume Analysis Workflow Rev. 1.2 Introduction Until the introduction of HDR, a video display s color reproduction range was typically represented with a two-dimensional chromaticity
Setup Guide. Klein K-10CP Colorimeter. Rev. 1.1
Setup Guide Klein K-10CP Colorimeter Rev. 1.1 Introduction Klein K-10CP Included Parts The K-10CP (Cinema Pro) is a reference class non-contact optical colorimeter with superb accuracy, the fastest read
Setup Guide. SpectraCal C6 HDR2000 Colorimeter. Rev. 1.2
Setup Guide SpectraCal C6 HDR2000 Colorimeter Rev. 1.2 Introduction The SpectraCal C6 HDR2000 Colorimeter is one of the most advanced light measurement devices available, providing the accuracy you need
Calibration Using i1 probe with CalMan and Resolve
20160526 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com Please
User Manual. Rev. 1.3
User Manual Rev. 1.3 Table of Contents Introduction 3 Important Safety Information 4 Electrostatic Discharge (ESD) Protection 5 Key Features 6 What's in the Box 7 Control & Indicator Functions 8 HDMI System
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide Thank you for purchasing an AV Foundry VideoForge HDMI Digital Video Generator, a versatile, high value test pattern generator with
Setup Guide. Rev. 1.7
Setup Guide By Rev. 1.7 Intrductin The SpectraCal VideFrge PRO test pattern generatr can be autmatically cntrlled by the CalMAN Display Calibratin Sftware t prduce measurement and calibratin test patterns
Using LightSpace CMS for User Created Calibration LUTs
20140130 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com 1. If
Palette Master Color Management Software
Palette Master Color Management Software How to Use Guide 01 Proprietary Calibration Software Co-developed with leading color calibration experts X-Rite, Palette Master software simplifies calibration
Calibration Best Practices
Calibration Best Practices for Manufacturers By Tom Schulte SpectraCal, Inc. 17544 Midvale Avenue N., Suite 100 Shoreline, WA 98133 (206) 420-7514 info@spectracal.com http://studio.spectracal.com Calibration
So, how do I create LUTs for each one of the buttons on the remote?
Advanced Use of Prisma There are several papers and articles on LUTs and calibration that you can find on the Murideo web site. We'll start the discussion here by saying if you choose to optimize and maximize
More Skills 14 Watch TV in Windows Media Center
M05_TOWN5764_01_SE_SM5.QXD 11/24/10 1:08 PM Page 1 Chapter 5 Windows 7 More Skills 14 Watch TV in Windows Media Center You can watch and record broadcast TV in Windows Media Center. To watch and record
Achieve Accurate Color-Critical Performance With Affordable Monitors
Achieve Accurate Color-Critical Performance With Affordable Monitors Image Rendering Accuracy to Industry Standards Reference quality monitors are able to very accurately render video, film, and graphics
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays Display Accuracy to Industry Standards Reference quality monitors are able to very accurately reproduce video,
FSI Calibration Guide Using I1 / LightSpace / Resolve
FSI Calibration Guide Using I1 / LightSpace / Resolve Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
FSI Calibration Guide Using CR100 / LightSpace / BoxIO
FSI Calibration Guide Using CR100 / LightSpace / BoxIO Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
ICAC User Manual. ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement USO RESTRITO. Version 14.2.
ICAC User Manual ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement Version 14.2.1 INDEX 1- Introduction ----------------------------------- 3 2- Structure -------------------------------------
Operation Guide Version 1.0, December 2015
Operation Guide Version 1.0, December 2015 Document Revision History Revision Date Description v1.0 January 8, 2016 Initial release of COLR Operation Manual, based on firmware version 1.0.1 CONTENTS Contents...
Operation Guide Version 2.0, December 2016
Operation Guide Version 2.0, December 2016 Document Revision History Revision Date Description v1.0 January 8, 2016 Initial release of COLR Operation Manual, based on firmware version 1.0.1 CONTENTS Contents...
CLIPSTER. 3D LUT File Generation with the Kodak Display Manager. Supplement
Supplement: CLIPSTER 3D LUT File Generation with the Kodak Display Manager (Version 1.0) CLIPSTER 3D LUT File Generation with the Kodak Display Manager Supplement Supplement for the CLIPSTER Documentation:
Yellow Frog. Manual Version 1.1
Yellow Frog Manual Version 1.1 1 YellowFrog Contents PC Requirements...... 2 YellowFrog Power Meter Measurement.... 3 YellowFrog PC Software..... 3 Main Screen....... 4 Input Overload....... 5 Battery
What is the history and background of the auto cal feature?
What is the history and background of the auto cal feature? With the launch of our 2016 OLED products, we started receiving requests from professional content creators who were buying our OLED TVs for
SXGA096 DESIGN REFERENCE BOARD
SXGA096 DESIGN REFERENCE BOARD For Use with all emagin SXGA096 OLED Microdisplays USER S MANUAL VERSION 1.0 TABLE OF CONTENTS D01-501152-01 SXGA096 Design Reference Board User s Manual i 1. INTRODUCTION...
NEC MultiSync PA Series Wide Gamut LED-backlit color accurate desktop displays
NEC MultiSync PA Series Wide Gamut LED-backlit color accurate desktop displays Color Accurate Professional Desktop 24" 30 Color accuracy that you can trust. The 24 PA242W-BK, 30 PA302W-BK and PA302W in
NEC MultiSync PA322UHD-2. Wide Gamut 4K UHD resolution, LED-backlit color accurate desktop display
NEC MultiSync PA322UHD-2 Wide Gamut 4K UHD resolution, LED-backlit color accurate desktop display Crisp 4K ultra high definition (UHD) resolution and incredible, predictable color accuracy. The 32 MultiSync
Transmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
Instruction Manual. 1 Page
Instruction Manual 1 Page Introduction A reference pattern generator is an essential piece of equipment in the video calibration process. Most, if not all, certified and experienced calibrators utilize
FS1-X. Quick Start Guide. Overview. Frame Rate Conversion Option. Two Video Processors. Two Operating Modes
FS1-X Quick Start Guide Overview Matching up and synchronizing disparate video and audio formats is a critical part of any broadcast, mobile or post-production environment. Within its compact 1RU chassis,
LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1
Off-Press Proof Application Data Sheet LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1 The IDEAlliance Print Properties Working Group
NEC MultiSync PA243W. Wide Gamut color critical accurate desktop display
NEC MultiSync PA243W Wide Gamut color critical accurate desktop display Trusted color accuracy The 24 MultiSync PA243W delivers in applications where precise color is essential. The wide-gamut W-LED backlight
First Time Setup Guide
First Time Setup Guide www.exhibio.com 1.877.EXHIBIO (394.4246) Exhibio ST-200 Components & Accessories Standing Mount TV Tuner with Input Cable (USB 2.0 only) VESA Mount Over-the-Air Antenna Power Adapter
Technical Paper WHY SHOULD YOU CALIBRATE?
Technical Paper WHY SHOULD YOU CALIBRATE? DISPLAY CALIBRATION 101 By Tom Schulte From the early days of television, the video industry has agreed upon standards for how video signals should be formed and
SX7. Saga 7" Super Bright HDMI/3G-SDI Field Monitor with 3D-LUTs. Quick Start Guide. What s Included CHECKED BY
SX7 Quick Start Guide Saga 7" Super Bright HDMI/3G-SDI Field Monitor with 3D-LUTs What s Included 1 x Saga X7 Monitor 1 x V-Mount Plate (Attached) 1 x Mini-XLR to P-TAP Cable 1 x Dual Sony L Battery Adapter
S7H-DK S7H 7" High Bright Monitor Deluxe Kit
S7H-DK S7H 7" High Bright Monitor Deluxe Kit QUICKSTART GUIDE What s Included 1 x S7H Monitor 1 x Camera Shoe Mount 1 x Neoprene Sleeve 1 x Mini-XLR to P-TAP Cable 2 x DV Battery Plate 1 x DV Battery 1
Installer Guide. Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor.
Installer Guide Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor. For more information, see the manuals that came with these products. Setting Up the
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 1 Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1
NEC MultiSync PA Series with SpectraView II
Professional Desktop NEC MultiSync PA Series with Color calibration solution ideal for color-critical applications Thoughtfully designed and individually factory calibrated to deliver reliable, accurate
Basic Pattern Recognition with NI Vision
Basic Pattern Recognition with NI Vision Author: Bob Sherbert Keywords: National Instruments, vision, LabVIEW, fiducial, pattern recognition This tutorial aims to instruct the reader on the method used
USB 3.0 Powered 3G-SDI and HDMI Capture. 1 U-TAP
USB 3.0 Powered 3G-SDI and HDMI Capture www.aja.com 1 U-TAP USB 3.0 Powered SDI and HDMI Capture Only $345 US MSRP* Find a Reseller The U-TAP family of USB 3.0 capture devices includes U-TAP SDI for professional
First Question: Camera head. Lighting unit. Shooting stage
Elmo P30 Visualiser First Question: Q. Is everyone familiar with exactly what a visualiser is? A. A visualiser is effectively a camera on an arm, usually with a shooting stage and its own lighting source.
HD/SD-SDI TO VGA CONVERTER. DAC-60 Quick Start Guide.
HD/SD-SDI TO VGA CONVERTER DAC-60 Quick Start Guide www.datavideo.com Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase.
DH7-DK QUICKSTART GUIDE. DH7 4K Support HDMI On-Camera Field Monitor Deluxe Kit
DH7-DK QUICKSTART GUIDE DH7 4K Support HDMI On-Camera Field Monitor Deluxe Kit What s Included 1 x DH7 Monitor 1 x AC Adapter 1 x Camera Shoe Mount 1 x Screen Cleaning Wipe 1 x Screen Protection Film 1
CHAPTER 1. SETUP AND SOFTWARE INSTALLATION
CHAPTER 1. SETUP AND SOFTWARE INSTALLATION CONNECT A GEFORCE-BASED PC TO A 3D TV Use the following procedure to connect your system to a 3D TV: 1. Check the video connectors on your GPU and use the correct
Projector Management Application Version 7.00 Instruction Guide
Projector Management Application Version 7.00 Instruction Guide Contents 1 INTRODUCTION... 4 1.1 OUTLINE... 4 1.2 SYSTEM... 4 2 INSTALLATION... 5 2.1 SYSTEM REQUIREMENTS... 5 2.2 PROJECTOR MANAGEMENT APPLICATION
How to set ACES OUTPUT by F65, F55 and F5
How to set ACES OUTPUT by F65, F55 and F5 F65 Adjusting the Output Signal Image The look (tone and color) of the image output on SDI OUT1 connector and SDI OUT2 connector can be specified. This function
2G Video Wall Guide Just Add Power HD over IP Page1 2G VIDEO WALL GUIDE. Revised
2G Video Wall Guide Just Add Power HD over IP Page1 2G VIDEO WALL GUIDE Revised 2016-05-09 2G Video Wall Guide Just Add Power HD over IP Page2 Table of Contents Specifications... 4 Requirements for Setup...
In-situ Port Cal for Dual Carriages Tuner
In-situ Port Cal for Dual Carriages Tuner In-Situ port cal method is the calibration technique mainly for cascaded tuners or multi-carriage tuner. Unlike in-situ system cal which requires 2 VNA calibrations
DH5e-V2. Delta 5 On-Camera 4K HDMI Monitor with 3D LUTs. Quick Start Guide. What s Included
DH5e-V2 Quick Start Guide Delta 5 On-Camera 4K Monitor with 3D LUTs What s Included 1 x DH5e-V2 Monitor 1 x L Series Battery Plate 1 x AC Adapter 1 x Screen Cleaning Wipe 1 x Screen Protection Film 1 x
FS3. Quick Start Guide. Overview. FS3 Control
FS3 Quick Start Guide Overview The new FS3 combines AJA's industry-proven frame synchronization with high-quality 4K up-conversion technology to seamlessly integrate SD and HD signals into 4K workflows.
Portland Trail Blazers: CalMAN Display Calibration Case Study
The Moda Center, in downtown Portland, is home court for the Portland Trail Blazers By Tom Schulte Portland Trail Blazers: CalMAN Display Calibration Case Study Provided By SpectraCal, Inc. October 2016
MultiQ Digital signage template system for widescreen monitors
Technical Note MultiQ Digital signage template system for widescreen monitors This document is intended as a guide for users of the MultiQ Digital Signage Template System for widescreen monitors in landscape
BoxIO User Manual Updated Applies to BoxIO Firmware Version 1.51 IP Remote Utility Version 1.0
BoxIO User Manual Updated 09.25.2017 Applies to BoxIO Firmware Version 1.51 IP Remote Utility Version 1.0 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA. 30005 Phone: +1.678.835.4934
Scan Converter Installation Guide
Scan Converter Installation Guide Software on supplied disks Please note: The software included with your scan converter is OPTIONAL. It is not needed to make the scan converter work properly. This software
HD/SD-SDI TO VGA CONVERTER. DAC-60 Quick Start Guide.
HD/SD-SDI TO VGA CONVERTER DAC-60 Quick Start Guide www.datavideo.com Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase.
Globalmediapro SMR-650
Globalmediapro SMR-650 16 x 16 Modularized Hybrid 3G-SDI Matrix Operation Manual CONTENTS 1. Introduction... 1 2. Applications... 1 3. Package Contents... 1 4. System Requirements... 1 5. Features... 2
AX20. Atlas 19.5" 3G-SDI/HDMI Field and Studio Monitor with 3D LUTs & Scopes. Quick Start Guide. What s Included CHECKED BY
AX20 Quick Start Guide Atlas 19.5" 3G-SDI/HDMI Field and Studio Monitor with 3D LUTs & Scopes What s Included 1 x Atlas 19.5" Monitor 1 x AC Adapter 1 x Sunhood CHECKED BY AX20 FRONT 1920 x 1080 19.5 inch
CCE900-IP-TR. User s Guide
CCE900-IP-TR CCE900-IP-T & CCE900-IP-R User s Guide i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com 1. Introduction The CCE900-IP-T & CCE900-IP-R is a solution
Topic: Instructional David G. Thomas December 23, 2015
Procedure to Setup a 3ɸ Linear Motor This is a guide to configure a 3ɸ linear motor using either analog or digital encoder feedback with an Elmo Gold Line drive. Topic: Instructional David G. Thomas December
V pro8 QUICK START GUIDE
QUICK START GUIDE Welcome to your V pro8 FIRST STEPS POWERING ON CONNECTING YOUR COMPUTER Thank you for buying the Lawo V pro8, a true high-quality product developed and manufactured in Rastatt, Germany.
Ready. Set. Go make your show. Your guide to creating your first video program with
Ready. Set. Go make your show. Your guide to creating your first video program with TriCaster Mini Go Make Your Show Guide 01 Table of Contents Part 1: Ready. 1) Power, Monitoring and Control 04 2) Bringing
MultiScopeLite. Users Guide. Video Measurement and Calibration Tools. RHMG Software Tools Library 1/18/2013. Bill and Scott Werba
MultiScopeLite Video Measurement and Calibration Tools Users Guide RHMG Software Tools Library 1/18/2013 Authors: Bill and Scott Werba Developer: Scott Werba Document ID: 3000-001 Revision: v1.0.4 Publication
Connecting an Intel based Macintosh laptop to a TV
Connecting an Intel based Macintosh laptop to a TV Scenario 1: TV has a PC input on it 1. Look for the VGA connector on the back of your TV. It may also be labeled PC or RGB. 2. Make sure you have the
3G-SDI to HDMI Scaler Installation Guide
Introduction 3G-SDI to HDMI Scaler Installation Guide The 3G-SDI to HDMI Scaler allows you to broadcast 3G-SDI signals from one source to two 3G-SDI and one HDMI outputs. Key Features and Benefits Converts
Kaleidescape Co-Star for Lumagen
Kaleidescape Co-Star for Lumagen Installation Guide The Co-Star solution allows a Strato movie player to present a unified onscreen library that includes all of a Kaleidescape customer s movies from DVD
Omega 4K/UHD Three-Input Switcher. Introduction. Applications. for HDMI and USB-C with HDBaseT and HDMI Outputs
Introduction The Atlona AT-OME-ST31 is a 3 1 switcher and HDBaseT transmitter with HDMI and USB-C inputs. It features mirrored HDMI and HDBaseT outputs and is HDCP 2.2 compliant. The USB-C input is ideal
User Manual for ASSIST Evaluation & Programming Tool EPT002
Page 1 of 60 User Manual for ASSIST Evaluation & Programming Tool EPT002 Page 2 of 60 CONTENTS 1. Hardware... 3 1.1 Contents... 3 1.2 Interface Board... 4 1.3 Target-Holder... 5 1.4 Targets: codewheels
Live events staging. Media centers
Christie Spyder X80 80 megapixel, true 4K@60Hz performance across multiple displays Auditoriums Control rooms Live events staging Post-production Broadcast studios Corporate lobbies Media centers Sports
NJU26125 Application Note PEQ Adjustment Procedure Manual New Japan Radio Co., Ltd
NJU26125 Application Note PEQ Adjustment Procedure Manual New Japan Radio Co., Ltd Version 1.00 CONTENTS 1.ABSTRACT...2 2.NJU26125 FIRMWARE BLOCK DIAGRAM...2 3.EQUIPMENT...2 4.ATTENTION...2 5.GENERAL FLOW
User Manual. May 2005 AIN LIGHT
May 2005 AIN LIGHT This user manual is designed to help the operators and owners of Soft-LED products use, troubleshoot, and utilize all of the product s potential. Customers seeking additional help not
Statement SmartLCT User s Manual Welcome to use the product from Xi an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar ). It is our great
LED Display Configuration Software SmartLCT User s Manual Software Version: V3.0 Rev3.0.0 NS110100239 Statement SmartLCT User s Manual Welcome to use the product from Xi an NovaStar Tech Co., Ltd. (hereinafter
EAN-Performance and Latency
EAN-Performance and Latency PN: EAN-Performance-and-Latency 6/4/2018 SightLine Applications, Inc. Contact: Web: sightlineapplications.com Sales: sales@sightlineapplications.com Support: support@sightlineapplications.com
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above Things to check before tuner characterization Make sure tuner is power up and USB cable is connected to the computer
Quick Start Guide. Multidimensional Imaging
Quick Start Guide Multidimensional Imaging Printed 11/2012 Multidimensional Imaging Content Quick Start Guide Content 1 Introduction 4 2 Set up multi-channel experiments 5 2.1 Set up a new experiment
HD-SDI Express User Training. J.Egri 4/09 1
HD-SDI Express User Training J.Egri 4/09 1 Features SDI interface Supports 720p, 1080i and 1080p formats. Supports SMPTE 292M serial interface operating at 1.485 Gbps. Supports SMPTE 274M and 296M framing.
Positive Attendance. Overview What is Positive Attendance? Who may use Positive Attendance? How does the Positive Attendance option work?
Positive Attendance Overview What is Positive Attendance? Who may use Positive Attendance? How does the Positive Attendance option work? Setup Security Codes Absence Types Absence Reasons Attendance Periods/Bell