NanoGiant Oscilloscope/Function-Generator Program. Getting Started

Size: px
Start display at page:

Download "NanoGiant Oscilloscope/Function-Generator Program. Getting Started"

Transcription

1 Getting Started Page 1 of 17 NanoGiant Oscilloscope/Function-Generator Program Getting Started This NanoGiant Oscilloscope program gives you a small impression of the capabilities of the NanoGiant multi-purpose interface. It demonstrates the ADC and DAC functions. For an complete description of all functions press here. The NanoGiant communicate with your PC/Notebook by means of an high speed USB 2 connection. Before installing the oscilloscope software install the communication drivers. Download the latest version of TUeDACSsetup, press here, and follow the on screen prompts. Then run Setup.exe located in the installer directory on the CD. You must have administrator rights on the PC to install the program. Follow the on screen prompts. The final installation takes up approximately 20 MB of disc space and includes the Run Time Engine of LabWindows CVI. In the START menu of Windows you can now find the NanoGiant Oscilloscope installed: Further help is given in the program when you enable the Show Tooltip option. Right click the trace graph and select Show Tooltips, and move the cursor over a control or indicator. Or press F1 to view this help file. To uninstall the oscilloscope software, open Control Panel and then launch Add or Remove Programs. Find the entry NG Oscilloscope2ch and choose Remove. The program switch to Demo mode when it can't find a NanoGiant. The functionality in Demo mode is limited but gives you an impression of how the windows look like.

2 NG Main Window Page 2 of 17 NanoGiant Oscilloscope/Function-Generator Program One of the following Windows opens when you start the NG oscilloscope Program. If no NanoGiant is connected the left window informs you that you can run the program in Off-Line mode, the right window shows the connected NanoGiant('s) and let you, in case more NanoGiants are connected, choose which one to use. Pressing the OK button start the main program. Simply click on one of the items below to get further information. Start the Oscilloscope Start the signal generator function Start the digital I/O monitor function Start the Signal analyze function The Off-Line mode runs without hardware and shows only a brief functionality of the available functions. NanoGiant 2 Channel Oscilloscope functions Press the Acquire button to start the Oscilloscope. When two signals are provided to the BNC connectors ADC 1 and ADC 2 on the back panel the graph may look like Figure 1.

3 NG Main Window Page 3 of 17 Figure 1 Figure 1 shows the Oscilloscope in action. The red trace is the channel 1 data and the green trace the channel 2 data. The functions of the various controls are described in the following paragraphs. Figure 2 Starting and Stopping Data acquisition. Press the Acquire button to start, and the Stop button to stop, data acquisition. The led (10) and the animation (21) are indicating that new data can be acquired. On "slow" computers it's better to stop the animation, right click on the animation to toggle it on and off. If you stop data acquisition two cursors become available. They snap automatically to the

4 NG Main Window Page 4 of 17 nearest trace, and x-y-t information is displayed in lower left area of the graph. More info on cursors click here. Saving Data. Press the Save Data button (13) to save the current traces. The data file is default stored in the <personal directory>\ng_data directory. During the saving process, the filename is visible in the graph and a green led is displayed at the right of the save data button. When the led turns red, the program failed in saving the data file due to: Disk is full or no write permission. File name is generated as follows: NG_trace_<current date>_<current time>.csv. File Format: ASCII, and comma delimited. Voltage [V] Channel 1 Voltage [V] Channel 2 time[s] Setting the sensitivity of the ADC channels. Rotate the Volts/Div knob (8) for channel 1 and Volts/Div knob (11) for channel 2. The trace and axis of the corresponding channel reflects the changes. Right clicking the knobs returns it to the least sensitive value. To put a channel in auto range mode click on the led s (7) or (12), notice that the color of the range values change from blue to red indicating that the Volts/Div for that channel is not valid anymore. Click the led again to switch of the auto range mode. Setting the Sweep time. The Sweep Time knob (4) affects the sample frequency of the ADC's. Together wit the number of samples it determined the time base of the oscilloscope. Default 500 samples are taken during one trace. The number of samples can be changed by right clicking the Sweep Time knob. An 10 times extended time scale can be realized by pressing the x10 led (20), the Sweep Time knob is then replaced by an Position knob. You can also use the Mouse Wheel to increase or decrease the Sweep Time. And if you press the Shift key and the Mouse Wheel the number of samples is changed. Setting the Display mode. With the Display slide (3) you can switch between the various display modes: Ch1-t: Voltage channel 1 left Y-axis versus time X-axis. Ch2-t: Voltage channel 2 right Y-axis versus time X-axis. Ch1-t & Ch2-t: Voltage channel 1 left Y-axis, Voltage channel 2 right Y-axis

5 NG Main Window Page 5 of 17 versus time X-axis. Ch1-Ch2: Voltage channel 1 left Y-axis versus Voltage channel 2 X-axis. Axis names and scales are automatically adjusted to reflect the display mode. Setting the trigger mode. With the Trigger slide (5) you can switch between the various trigger modes: Ext: external trigger mode, data acquisition is started after a 5V to 0V transition on pin 16 (Ch1)-18 (Ch2) of the digital I/O connector. When the Display Mode is Ch1- t & Ch2-t or Ch1-Ch2 pin 16 and 18 must both be connected to the external trigger signal. FreeRun: free run mode, the data acquisition is continuous. Int: internal trigger mode, data acquisition starts after an software trigger, right click the slide to display the delay time. Single: single trigger mode, data acquisition of one trace is started after pressing the single trigger button (6). Apply a filter to an ADC channel. The low-pass input filter consists of an 8th order elliptic filter with a software selectable cutoff frequency, in the range 0.76 Hz to 12 khz, and can be used for anti-aliasing. Choose with the channel selector (2) the channel you want to apply a filter to. Choose cut-off frequency. You can also apply a software AC filer. Notice that when you use the AC filter, the filtered out DC component is displayed in the graph. Apply display channel offset ADC channels. Use the slides (19) and (16) to shift the channel trace. Display hidden controls. Control to display Action Number of samples Right click Sweep Time button (4) Delay Time Right click Trigger button (5) Trace statistics Right click graph in Data Analyze window ADC status leds Right click Start/Stop adc led (10) Full window ADC data Double click the graph (15) Info and Print Functions. Right click the graph (15) to display an Popup Menu: Show ToolTips Show info on controls.

6 NG Main Window Page 6 of 17 Help Brings up this help screen. About...- Pop up About window. Print - Print window to default printer. Back to Top 2 Channel Analyze function Pressing the Analyze button shows a window with the current raw trace data at the top graph, and the power spectrum of the filtered input signal (Power Spectrum) at the bottom. The raw data can be extra "smoothed". Figure 3 Figure 3 shows the power spectrum. With the Channel selector you can select channel 1, channel 2 or the sum of the channels. The top graph shows the chosen trace in the time domain, the bottom in the frequency domain. Use the mouse to move the vertical green graph cursor to an area that you wish to know the peak frequency and its power. These values are displayed in the Output Signal Info section. You can apply different windowing functions (filters) in the Data Window section. Units and scale can be changed in the Output Signal Display section. For more info follow this link. Back to Top NanoGiant 2 Channel Function Generator Start Function Generator.

7 NG Main Window Page 7 of 17 Figure 4 Figure 4 shows the Function Generator Window, the various controls are described in the following paragraphs. Starting the Function Generator. Switch On-Off button to the On position and the generated signal comes available on the corresponding DAC BNC on the front panel. Synchronizing the DAC's. When you press the sync 1&2 button both dac's are triggered at the same time. Synchronization is lost when you apply an other setting to one of the dac's. Wave Form selector. With the Wave Form selector you can choose one of the 5 predefined wave forms: Sine, Triangle, Square, Sawtooth and Noise. For this wave forms you can adjust the Sample Frequency, Amplitude, Offset and in case Square the DutyCycle of the wave. Additionally there is the load from File option. Press the open file button to load the file in to the DAC memory. The file must be in ASCII and contain 1 column of values between and 10.0 [Volt]. A maximum of 2048 values can be loaded. For an example follow this link. Wave Frequency. The Frequency of the output wave form is determined by the Sample Frequency and the Number of samples. Default the number of samples is 500, with a maximum of When you right click the graph you can edit the number of samples. Back to Top NanoGiant Digital I/O Monitor Function Digital I/O control window.

8 NG Main Window Page 8 of 17 Figure 5 Figure 5 shows the DIGITAL I/O control window. There are 16 programmable I/O ports. In case the oscilloscope is using the external tigger mode, DIO12 and DIO13 are sacrificed. Bit assignment bit function remark pin 0 DIO0 Input/Output 1 1 DIO1 Input/Output 2 2 DIO2 Input/Output 3 3 DIO3 Input/Output 4 4 DIO4 Input/Output 5 5 DIO5 Input/Output 6 6 DIO6 Input/Output 7 7 DIO7 Input/Output 8 8 DIO8 Input/Output 10 9 DIO9 Input/Output DIO10 Input/Output DIO11 Input/Output DIO12 Input/Output - Trigger input ADC DIO13 Input/Output - Trigger input ADC DIO14 Input/Output - Trigger input DAC DIO15 Input/Output - Trigger input DAC2 20 Back to Top Contact and Information About info window.

9 NG Main Window Page 9 of 17 Right click the graph and choose About... from the popup menu to get version info. For detailed TUeDACS NanoGiant Hardware Specifications and Software description press here. For more general information press the TUeDACS home page. Or Us. Back to Top Back to Top

10 Controls Page 10 of 17 Explanation various Controls Graph 2 Channel switch filters 16 Offset slider Channel 2 3 Display Mode switch 17 4 Sweep Time selector/ Position 18 Y-axis sensitivity 5 Trigger Mode switch 19 Offset slider Channel 1 6 Single trigger button 20 Extending time scale x10 7 Auto scale Channel 1 switch 21 indicate that data can be acquired 8 Sensitivity selector Channel 1 22 Number of sample/ trace 9 23 Delay time indicator 10 indicate that data can be acquired 24 Offset value AC filter Channel 2 11 Sensitivity selector Channel 2 25 Offset value AC filter Channel 1 12 Auto scale Channel 2 switch Save data button X-axis sensitivity

11 Controls Page 11 of 17

12 Load from file Page 12 of 17 Load file from disk example. 1 Press 2 Choose File from the Wave Form selector and press the open file button 3 Select the dac1ydata.txt file

13 Load from file Page 13 of 17 4 Right click the graph to view the Number of Samples. 5 Select a Sample Frequency of 1 khz. 6 Switch the DAC On. 7 Repeat this for DAC 2 but select the dac2xdata.txt file. 8 Connect externally ADC-1 with DAC-1 and ADC-2 with DAC-2, press the sync 1&2 button

14 Load from file Page 14 of 17 9 Right click the Sweep Time knob and change the Number of Samples to Select a Sweep Time of 50 ms/div 11 Right click the Storage button to toggle between lines and dots.

15 Load from file Page 15 of Switch the Display mode selector to Ch1-Ch2. 13 The text TEST ADC DAC OK should appear.

16 Sampling info Page 16 of 17 Analog Frequency, Sample Rate, and Nyquist Theorem. The Nyquist Theorem states that the highest frequency you can accurately represent is half the sampling rate. For instance, to measure the frequency of a 100 Hz signal, you need a sampling rate of at least 200 S/s. In practice, you should use sampling rates of 5 to 10 times the expected frequencies to improve accuracy of measurements. In addition to sample rate, you need to determine the number of samples to acquire. You must sample a minimum of three cycles of the analog signal. For example, you need to collect at least 15 samples, or points, if you use a sampling rate of 500 S/s to measure the frequency of a 100 Hz signal. Because you sample about five times faster than the signal frequency, you sample about five points per cycle of the signal. You need data from three cycles, so 5 points x 3 cycles = 15 points. In practice, however, you should acquire 10 or more cycles to improve accuracy of measurements, so you should acquire 50 or more samples. The number of points you collect determines the number of frequency bins that the samples fall into. The size of each bin is the sampling rate divided by the number of points you collect. For example, if you sample at 500 S/s and collect 100 points, you have bins at 5 Hz intervals. The Nyquist frequency is the bandwidth of the sampled signal and is equal to half the sampling frequency. Frequency components below the Nyquist frequency appear normally. Frequency components above the Nyquist frequency appear aliased between 0 and the Nyquist frequency. The aliased component is the absolute value of the difference between the actual component and the closest integer multiple of the sampling rate. For example, if you have a signal with a component at 800 Hz and you sample at 500 S/s, that component appears aliased at 200 Hz because 800 (2 x 500) = 200(Hz). One way to eliminate aliased components is to use an analog hardware filter before you digitize and analyze the frequency information. If you want to perform all the filtering in software, you must first sample at a rate fast enough to correctly represent the highest frequency component the signal contains. For example, with the highest component at 800 Hz, the minimum sampling rate is 1,600 Hz, but you should sample 5 to 10 times faster than 800 Hz. If the frequency you want to measure is around 100 Hz, you can use a lowpass Butterworth filter with a cutoff frequency (fc) of 250 Hz to filter out frequencies above 250 Hz and pass frequencies below 250 Hz. Windowing Use windowing, or smoothing windows, to minimize spectral leakage associated with truncated waveforms. Spectral Leakage Spectral leakage is a phenomenon whereby the measured spectral energy appears to leak from one frequency into other frequencies. It occurs when a sampled waveform does not contain an integral number of cycles over the time period during which it was sampled. The technique used to reduce spectral leakage is to multiply the time-domain waveform by a window function.

17 Sampling info Page 17 of 17 Discrete Fourier Transform (DFT) and Fast Fourier Transform (FFT) are mathematical techniques that resolve a given signal into the sum of sines and cosines. It is the basis for spectrum analysis. Using the DFT/FFT when you sample a noninteger number of cycles, such as 7.5 cycles, returns a spectrum in which it appears as if the energy at one frequency leaks into all the other frequencies because the FFT assumes that the data is a single period of a periodically repeating waveform. The artificial discontinuities appear as very high frequencies that were not present in the original signal. Because these frequencies are higher than the Nyquist frequency, they appear aliased between 0 and fs/2. The type of window to use depends on the type of signal you acquire and on the application. Choosing the correct window requires some knowledge of the signal that you are analyzing. The following table lists common types of windows, the appropriate signal types, and example applications. Window Signal Type and Description Applications Rectangular (no window) Transient signals that are shorter than the length of the window; truncates a window to within a finite time interval Order tracking, system analysis (frequency response measurements) with pseudorandom excitation, separation of two tones with frequencies very close to each other but with almost equal amplitudes Triangle Window that is the shape of a triangle General-purpose applications Hanning Transient signals that are longer than the length of the window General-purpose applications, system analysis (frequency response measurements) with random excitation Hamming Transient signals that are longer than Often used in speech signal processing the length of the window; a modified version of the Hanning window that is discontinuous at the edges Blackman Transient signals; similar to Hanning and Hamming windows but adds one additional cosine term to reduce ripple General-purpose applications Flat Top Has the best amplitude accuracy of all the windows but limits frequency selectivity Accurate, single-tone amplitude measurements with no nearby frequency components Note In many cases, you might not have sufficient knowledge of the signal, so you need to experiment with different windows to find the best one.

MIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003

MIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003 MIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003 OBJECTIVE To become familiar with state-of-the-art digital data acquisition hardware and software. To explore common data acquisition

More information

Spectrum Analyser Basics

Spectrum Analyser Basics Hands-On Learning Spectrum Analyser Basics Peter D. Hiscocks Syscomp Electronic Design Limited Email: phiscock@ee.ryerson.ca June 28, 2014 Introduction Figure 1: GUI Startup Screen In a previous exercise,

More information

PRELIMINARY INFORMATION. Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment

PRELIMINARY INFORMATION. Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment Integrated Component Options Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment PRELIMINARY INFORMATION SquareGENpro is the latest and most versatile of the frequency

More information

ME EN 363 ELEMENTARY INSTRUMENTATION Lab: Basic Lab Instruments and Data Acquisition

ME EN 363 ELEMENTARY INSTRUMENTATION Lab: Basic Lab Instruments and Data Acquisition ME EN 363 ELEMENTARY INSTRUMENTATION Lab: Basic Lab Instruments and Data Acquisition INTRODUCTION Many sensors produce continuous voltage signals. In this lab, you will learn about some common methods

More information

Burlington County College INSTRUCTION GUIDE. for the. Hewlett Packard. FUNCTION GENERATOR Model #33120A. and. Tektronix

Burlington County College INSTRUCTION GUIDE. for the. Hewlett Packard. FUNCTION GENERATOR Model #33120A. and. Tektronix v1.2 Burlington County College INSTRUCTION GUIDE for the Hewlett Packard FUNCTION GENERATOR Model #33120A and Tektronix OSCILLOSCOPE Model #MSO2004B Summer 2014 Pg. 2 Scope-Gen Handout_pgs1-8_v1.2_SU14.doc

More information

Experiment 13 Sampling and reconstruction

Experiment 13 Sampling and reconstruction Experiment 13 Sampling and reconstruction Preliminary discussion So far, the experiments in this manual have concentrated on communications systems that transmit analog signals. However, digital transmission

More information

Please feel free to download the Demo application software from analogarts.com to help you follow this seminar.

Please feel free to download the Demo application software from analogarts.com to help you follow this seminar. Hello, welcome to Analog Arts spectrum analyzer tutorial. Please feel free to download the Demo application software from analogarts.com to help you follow this seminar. For this presentation, we use a

More information

Getting Started with the LabVIEW Sound and Vibration Toolkit

Getting Started with the LabVIEW Sound and Vibration Toolkit 1 Getting Started with the LabVIEW Sound and Vibration Toolkit This tutorial is designed to introduce you to some of the sound and vibration analysis capabilities in the industry-leading software tool

More information

LeCroy Digital Oscilloscopes

LeCroy Digital Oscilloscopes LeCroy Digital Oscilloscopes Get the Complete Picture Quick Reference Guide QUICKSTART TO SIGNAL VIEWING Quickly display a signal View with Analog Persistence 1. Connect your signal. When you use a probe,

More information

Analog Arts SA985 SA975 SA935 SA915 Product Specifications [1]

Analog Arts SA985 SA975 SA935 SA915 Product Specifications [1] www.analogarts.com Analog Arts SA985 SA975 SA935 SA915 Product Specifications [1] 1. These models consist of an oscilloscope, a spectrum analyzer, a data recorder, and a frequency & phase meter. Oscilloscope/

More information

Major Differences Between the DT9847 Series Modules

Major Differences Between the DT9847 Series Modules DT9847 Series Dynamic Signal Analyzer for USB With Low THD and Wide Dynamic Range The DT9847 Series are high-accuracy, dynamic signal acquisition modules designed for sound and vibration applications.

More information

2 MHz Lock-In Amplifier

2 MHz Lock-In Amplifier 2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Dual reference mode Low-noise current and voltage inputs Touchscreen data display

More information

Oscilloscopes, logic analyzers ScopeLogicDAQ

Oscilloscopes, logic analyzers ScopeLogicDAQ Oscilloscopes, logic analyzers ScopeLogicDAQ ScopeLogicDAQ 2.0 is a comprehensive measurement system used for data acquisition. The device includes a twochannel digital oscilloscope and a logic analyser

More information

DT9857E. Key Features: Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels

DT9857E. Key Features: Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels DT9857E Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels The DT9857E is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements

More information

Lab 1 Introduction to the Software Development Environment and Signal Sampling

Lab 1 Introduction to the Software Development Environment and Signal Sampling ECEn 487 Digital Signal Processing Laboratory Lab 1 Introduction to the Software Development Environment and Signal Sampling Due Dates This is a three week lab. All TA check off must be completed before

More information

ECE 5765 Modern Communication Fall 2005, UMD Experiment 10: PRBS Messages, Eye Patterns & Noise Simulation using PRBS

ECE 5765 Modern Communication Fall 2005, UMD Experiment 10: PRBS Messages, Eye Patterns & Noise Simulation using PRBS ECE 5765 Modern Communication Fall 2005, UMD Experiment 10: PRBS Messages, Eye Patterns & Noise Simulation using PRBS modules basic: SEQUENCE GENERATOR, TUNEABLE LPF, ADDER, BUFFER AMPLIFIER extra basic:

More information

Introduction to the oscilloscope and digital data acquisition

Introduction to the oscilloscope and digital data acquisition Introduction to the oscilloscope and digital data acquisition Eric D. Black California Institute of Technology v1.1 There are a certain number of essential tools that are so widely used that every aspiring

More information

MINI PC SCOPE PCSU01. User manual. test leads software download USB cable design enclosure

MINI PC SCOPE PCSU01. User manual. test leads software download USB cable design enclosure MINI PC SCOPE PCSU01 User manual Features test leads software download USB cable design enclosure Specifications oscilloscope: o bandwidth: DC to 200 khz ± 3 db o input impedance: 100 ko / 20 pf o maximum

More information

ni.com Digital Signal Processing for Every Application

ni.com Digital Signal Processing for Every Application Digital Signal Processing for Every Application Digital Signal Processing is Everywhere High-Volume Image Processing Production Test Structural Sound Health and Vibration Monitoring RF WiMAX, and Microwave

More information

Manual for the sound card oscilloscope V1.41 C. Zeitnitz english translation by P. van Gemmeren, K. Grady and C. Zeitnitz

Manual for the sound card oscilloscope V1.41 C. Zeitnitz english translation by P. van Gemmeren, K. Grady and C. Zeitnitz Manual for the sound card oscilloscope V1.41 C. Zeitnitz english translation by P. van Gemmeren, K. Grady and C. Zeitnitz C. Zeitnitz 12/2012 This Software and all previous versions are NO Freeware! The

More information

Lab experience 1: Introduction to LabView

Lab experience 1: Introduction to LabView Lab experience 1: Introduction to LabView LabView is software for the real-time acquisition, processing and visualization of measured data. A LabView program is called a Virtual Instrument (VI) because

More information

Electrical and Electronic Laboratory Faculty of Engineering Chulalongkorn University. Cathode-Ray Oscilloscope (CRO)

Electrical and Electronic Laboratory Faculty of Engineering Chulalongkorn University. Cathode-Ray Oscilloscope (CRO) 2141274 Electrical and Electronic Laboratory Faculty of Engineering Chulalongkorn University Cathode-Ray Oscilloscope (CRO) Objectives You will be able to use an oscilloscope to measure voltage, frequency

More information

Oscilloscope Guide Tektronix TDS3034B & TDS3052B

Oscilloscope Guide Tektronix TDS3034B & TDS3052B Tektronix TDS3034B & TDS3052B Version 2008-Jan-1 Dept. of Electrical & Computer Engineering Portland State University Copyright 2008 Portland State University 1 Basic Information This guide provides basic

More information

Analog Arts SA985 SA975 SA935 SA915 Product Specifications

Analog Arts SA985 SA975 SA935 SA915 Product Specifications Analog Arts SA985 SA975 SA935 SA915 Product Specifications Oscilloscope/ Spectrum Analyzer/ Data Recorder Model SA985 SA975 SA935 SA915 Oscilloscope (Typical by Design) Bandwidth (Max at probe tip) [1]

More information

MSO-28 Oscilloscope, Logic Analyzer, Spectrum Analyzer

MSO-28 Oscilloscope, Logic Analyzer, Spectrum Analyzer Link Instruments Innovative Test & Measurement solutions since 1986 Store Support Oscilloscopes Logic Analyzers Pattern Generators Accessories MSO-28 Oscilloscope, Logic Analyzer, Spectrum Analyzer $ The

More information

imso-104 Manual Revised August 5, 2011

imso-104 Manual Revised August 5, 2011 imso-104 Manual Revised August 5, 2011 Section 1 Getting Started SAFETY 1.10 Quickstart Guide 1.20 SAFETY 1.30 Compatibility 1.31 Hardware 1.32 Software Section 2 How it works 2.10 Menus 2.20 Analog Channel

More information

Manual of Operation for WaveNode Model WN-2m. Revision 1.0

Manual of Operation for WaveNode Model WN-2m. Revision 1.0 Manual of Operation for WaveNode Model WN-2m. Revision 1.0 TABLE OF CONTENTS 1. Description of Operation 2. Features 3. Installation and Checkout 4. Graphical Menus 5. Information for Software Expansion

More information

Operating Instructions

Operating Instructions Operating Instructions HAEFELY TEST AG KIT Measurement Software Version 1.0 KIT / En Date Version Responsable Changes / Reasons February 2015 1.0 Initial version WARNING Introduction i Before operating

More information

SigPlay User s Guide

SigPlay User s Guide SigPlay User s Guide . . SigPlay32 User's Guide? Version 3.4 Copyright? 2001 TDT. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or

More information

Digital Storage Oscilloscopes 2550 Series

Digital Storage Oscilloscopes 2550 Series Data Sheet Digital Storage Oscilloscopes 2550 Series The 2550 series digital storage oscilloscopes provide high performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz

More information

User Manual. Digital Storage Oscilloscopes Models 2534, 2540 & General Safety Summary. Version 1.03

User Manual. Digital Storage Oscilloscopes Models 2534, 2540 & General Safety Summary. Version 1.03 General Safety Summary General Safety Summary User Manual Digital Storage Oscilloscopes Models 2534, 2540 & 2542 Review the following safety precautions to avoid injury and prevent damage to this product

More information

Analog Discovery Scope and Waveform Generator Edited 11/15/2016 by Eric Scotti & DGH

Analog Discovery Scope and Waveform Generator Edited 11/15/2016 by Eric Scotti & DGH Analog Discovery Scope and Waveform Generator Edited 11/15/2016 by Eric Scotti & DGH Specifications The Analog Discovery contains several devices but we will likely only use the 2 channel oscilloscope

More information

DPD80 Visible Datasheet

DPD80 Visible Datasheet Data Sheet v1.3 Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. General Description The DPD8 is a low noise digital photodetector

More information

Activity P32: Variation of Light Intensity (Light Sensor)

Activity P32: Variation of Light Intensity (Light Sensor) Activity P32: Variation of Light Intensity (Light Sensor) Concept DataStudio ScienceWorkshop (Mac) ScienceWorkshop (Win) Illuminance P32 Vary Light.DS P54 Light Bulb Intensity P54_BULB.SWS Equipment Needed

More information

Overview. Know Your Oscilloscope. Front Panel. Rear Panel. Sharing Agilent s Resources with Engineering Educators

Overview. Know Your Oscilloscope. Front Panel. Rear Panel. Sharing Agilent s Resources with Engineering Educators Know Your Oscilloscope Overview Front Panel Sharing Agilent s Resources with Engineering Educators www.educatorscorner.com Horizontal (time) controls Run control Special purpose menus/controls Trigger

More information

INSTRUCTION GUIDE. for the. Keysight (formally Agilent; Hewlett-Packard) Model #33509B. and. Tektronix. Fall 2017

INSTRUCTION GUIDE. for the. Keysight (formally Agilent; Hewlett-Packard) Model #33509B. and. Tektronix. Fall 2017 v3 INSTRUCTION GUIDE for the Keysight (formally Agilent; Hewlett-Packard) WAVEFORM GENERATOR Model #33509B 33500 Series and Tektronix OSCILLOSCOPE Model #MSO2004B Fall 2017 Pg. 2 Scope-Gen Handout_part

More information

User Manual. Digital Storage Oscilloscopes Models 2534, 2540 & 2542

User Manual. Digital Storage Oscilloscopes Models 2534, 2540 & 2542 User Manual Digital Storage Oscilloscopes Models 2534, 2540 & 2542 General Safety Summary General Safety Summary Review the following safety precautions to avoid injury and prevent damage to this product

More information

25 MHz Digital Storage Oscilloscope

25 MHz Digital Storage Oscilloscope 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Model: 2530B 25 MHz Digital Storage Oscilloscope USER MANUAL Safety Summary The

More information

DPD80 Infrared Datasheet

DPD80 Infrared Datasheet Data Sheet v1.4 DPD8 Infrared DPD8 Infrared Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. DPD8 Infrared General Description The

More information

System Requirements SA0314 Spectrum analyzer:

System Requirements SA0314 Spectrum analyzer: System Requirements SA0314 Spectrum analyzer: System requirements Windows XP, 7, Vista or 8: 1 GHz or faster 32-bit or 64-bit processor 1 GB RAM 10 MB hard disk space \ 1. Getting Started Insert DVD into

More information

4CH/2CH Digital Storage Oscilloscopes

4CH/2CH Digital Storage Oscilloscopes Model: 2553, 2555, 2556, 2557, 2558, 2559 4CH/2CH Digital Storage Oscilloscopes USER MANUAL Safety Summary The following safety precautions apply to both operating and maintenance personnel and must be

More information

S op o e p C on o t n rol o s L arni n n i g n g O bj b e j ctiv i e v s

S op o e p C on o t n rol o s L arni n n i g n g O bj b e j ctiv i e v s ET 150 Scope Controls Learning Objectives In this lesson you will: learn the location and function of oscilloscope controls. see block diagrams of analog and digital oscilloscopes. see how different input

More information

Pre-processing of revolution speed data in ArtemiS SUITE 1

Pre-processing of revolution speed data in ArtemiS SUITE 1 03/18 in ArtemiS SUITE 1 Introduction 1 TTL logic 2 Sources of error in pulse data acquisition 3 Processing of trigger signals 5 Revolution speed acquisition with complex pulse patterns 7 Introduction

More information

DT8837 Ethernet High Speed DAQ

DT8837 Ethernet High Speed DAQ DT8837 High Performance Ethernet (LXI) Instrument Module for Sound & Vibration (Supported by the VIBpoint Framework Application) DT8837 Ethernet High Speed DAQ The DT8837 is a highly accurate multi-channel

More information

Digital Effects Pedal Description Ross Jongeward 10 December 2014

Digital Effects Pedal Description Ross Jongeward 10 December 2014 Digital Effects Pedal Description Ross Jongeward 10 December 2014 1 Contents Section Number Title Page 1.1 Introduction..3 2.1 Project Electrical Specifications..3 2.1.1 Project Specifications...3 2.2.1

More information

Portable Performance for Debug and Validation

Portable Performance for Debug and Validation WaveJet 300A Oscilloscopes 100 MHz 500 MHz Portable Performance for Debug and Validation A UNIQUE TOOLSET FOR PORTABLE OSCILLOSCOPES Key Features 100 MHz, 200 MHz, 350 MHz and 500 MHz bandwidths Sample

More information

WAVEJET 300 SERIES OSCILLOSCOPES. New Cover to Come. Unmatched Performance, Portability, and Value

WAVEJET 300 SERIES OSCILLOSCOPES. New Cover to Come. Unmatched Performance, Portability, and Value WAVEJET 300 SERIES OSCILLOSCOPES New Cover to Come Unmatched Performance, Portability, and Value ALL THE TOOLS YOU NEED Automatic Measurements Save time making measurements on your signals by using the

More information

Introduction To LabVIEW and the DSP Board

Introduction To LabVIEW and the DSP Board EE-289, DIGITAL SIGNAL PROCESSING LAB November 2005 Introduction To LabVIEW and the DSP Board 1 Overview The purpose of this lab is to familiarize you with the DSP development system by looking at sampling,

More information

imso-104 Manual Revised July 19, 2012

imso-104 Manual Revised July 19, 2012 imso-104 Manual Section 1 Getting Started SAFETY 1.10 Quickstart Guide 1.20 SAFETY 1.30 Compatibility 1.31 Hardware 1.32 Software Section 2 How it works 2.10 Menus 2.20 Analog Channel 2.21 On / Off 2.22

More information

Measuring with digital storage oscilloscopes

Measuring with digital storage oscilloscopes Markus Reil, Rainer Wagner 2.2016 1MAA265-1e Educational note Measuring with digital storage oscilloscopes Educational note Products: ı R&S HMO1002 This educational note covers the theory and practice

More information

Reference. TDS7000 Series Digital Phosphor Oscilloscopes

Reference. TDS7000 Series Digital Phosphor Oscilloscopes Reference TDS7000 Series Digital Phosphor Oscilloscopes 07-070-00 0707000 To Use the Front Panel You can use the dedicated, front-panel knobs and buttons to do the most common operations. Turn INTENSITY

More information

PicoScope 6407 Digitizer

PicoScope 6407 Digitizer YE AR PicoScope 6407 Digitizer HIGH PERFORMANCE USB DIGITIZER Programmable and Powerful 1 GHz bandwidth 1 GS buffer size 5 GS/s real-time sampling Advanced digital triggers Built-in function generator

More information

USB Mini Spectrum Analyzer User s Guide TSA5G35

USB Mini Spectrum Analyzer User s Guide TSA5G35 USB Mini Spectrum Analyzer User s Guide TSA5G35 Triarchy Technologies, Corp. Page 1 of 21 USB Mini Spectrum Analyzer User s Guide Copyright Notice Copyright 2011 Triarchy Technologies, Corp. All rights

More information

Choosing an Oscilloscope

Choosing an Oscilloscope Choosing an Oscilloscope By Alan Lowne CEO Saelig Company (www.saelig.com) Post comments on this article at www.nutsvolts.com/ magazine/article/october2016_choosing-oscilloscopes. All sorts of questions

More information

WAVEJET 300 SERIES OSCILLOSCOPES. Unmatched Performance, Portability, and Value

WAVEJET 300 SERIES OSCILLOSCOPES. Unmatched Performance, Portability, and Value WAVEJET 300 SERIES OSCILLOSCOPES Unmatched Performance, Portability, and Value 1 WAVEJET 300 SERIES Unique Capabilities in a Low Bandwidth Oscilloscope The WaveJet 300 Series features unmatched performance

More information

User Manual. Digital Oscilloscope V1.9

User Manual. Digital Oscilloscope V1.9 User Manual Digital Oscilloscope V1.9 Declaration All rights reserved. Contents in this Manual are not allowed to copy, extract and translate before being allowed by the company. Brief Introduction Characteristic:

More information

User Manual. GPS-1000B+ series. Digital Oscilloscope V 1.1

User Manual. GPS-1000B+ series. Digital Oscilloscope V 1.1 User Manual GPS-1000B+ series Digital Oscilloscope V 1.1 Brief Introduction Characteristic: The volume of the oscilloscope is cabinet and it is portable 7 Color TFT LCD display 2 channels, Bandwidth:

More information

The Measurement Tools and What They Do

The Measurement Tools and What They Do 2 The Measurement Tools The Measurement Tools and What They Do JITTERWIZARD The JitterWizard is a unique capability of the JitterPro package that performs the requisite scope setup chores while simplifying

More information

DT8837. High Performance Ethernet Instrument Module for Sound & Vibration. Overview. Key Features

DT8837. High Performance Ethernet Instrument Module for Sound & Vibration. Overview. Key Features DT8837 High Performance Ethernet Instrument Module for Sound & Vibration Overview The DT8837 is a high-accuracy, multi-channel module that is ideal for sound and vibration measurements. All the I/O channels

More information

ADS1000 Series Digital Storage Oscilloscope Version No.: V 1.0

ADS1000 Series Digital Storage Oscilloscope Version No.: V 1.0 User Manual ADS1000 Series Digital Storage Oscilloscope Version No.: V 1.0 Shenzhen Atten Electronics Co., Ltd Declaration Copyright Shenzhen Atten Electronics Co., Ltd. All rights reserved. Contents in

More information

4 MHz Lock-In Amplifier

4 MHz Lock-In Amplifier 4 MHz Lock-In Amplifier SR865A 4 MHz dual phase lock-in amplifier SR865A 4 MHz Lock-In Amplifier 1 mhz to 4 MHz frequency range Low-noise current and voltage inputs Touchscreen data display - large numeric

More information

User Manual SDS1000CML+/SDS1000DL+ Digital Oscilloscope UM0101A-E01A SIGLENT TECHNOLOGIES CO,.LTD

User Manual SDS1000CML+/SDS1000DL+ Digital Oscilloscope UM0101A-E01A SIGLENT TECHNOLOGIES CO,.LTD User Manual SDS1000CML+/SDS1000DL+ Digital Oscilloscope UM0101A-E01A SIGLENT TECHNOLOGIES CO,.LTD Declaration Copyright by SIGLENT TECHNOLOGIES CO,.LTD. All rights reserved. Contents in this Manual are

More information

PulseCounter Neutron & Gamma Spectrometry Software Manual

PulseCounter Neutron & Gamma Spectrometry Software Manual PulseCounter Neutron & Gamma Spectrometry Software Manual MAXIMUS ENERGY CORPORATION Written by Dr. Max I. Fomitchev-Zamilov Web: maximus.energy TABLE OF CONTENTS 0. GENERAL INFORMATION 1. DEFAULT SCREEN

More information

DT9837 Series. High Performance, USB Powered Modules for Sound & Vibration Analysis. Key Features:

DT9837 Series. High Performance, USB Powered Modules for Sound & Vibration Analysis. Key Features: DT9837 Series High Performance, Powered Modules for Sound & Vibration Analysis The DT9837 Series high accuracy dynamic signal acquisition modules are ideal for portable noise, vibration, and acoustic measurements.

More information

Digital Lock-In Amplifiers SR850 DSP lock-in amplifier with graphical display

Digital Lock-In Amplifiers SR850 DSP lock-in amplifier with graphical display Digital Lock-In Amplifiers SR850 DSP lock-in amplifier with graphical display SR850 DSP Lock-In Amplifier 1 mhz to 102.4 khz frequency range >100 db dynamic reserve 0.001 degree phase resolution Time constants

More information

NOTICE: This document is for use only at UNSW. No copies can be made of this document without the permission of the authors.

NOTICE: This document is for use only at UNSW. No copies can be made of this document without the permission of the authors. Brüel & Kjær Pulse Primer University of New South Wales School of Mechanical and Manufacturing Engineering September 2005 Prepared by Michael Skeen and Geoff Lucas NOTICE: This document is for use only

More information

The BAT WAVE ANALYZER project

The BAT WAVE ANALYZER project The BAT WAVE ANALYZER project Conditions of Use The Bat Wave Analyzer program is free for personal use and can be redistributed provided it is not changed in any way, and no fee is requested. The Bat Wave

More information

Expect to Make Waves.

Expect to Make Waves. Expect to Make Waves. The New Oscilloscope Large 10.4" LCD touch screen Long capture time Extensive communication capabilities www.lecroy.com The New Oscillos From its large 10.4" LCD touch screen to its

More information

University of Utah Electrical & Computer Engineering Department ECE1050/1060 Oscilloscope

University of Utah Electrical & Computer Engineering Department ECE1050/1060 Oscilloscope University of Utah Electrical & Computer Engineering Department ECE1050/1060 Oscilloscope Name:, A. Stolp, 2/2/00 rev, 9/15/03 NOTE: This is a fill-in-the-blanks lab. No notebook is required. You are encouraged

More information

Digitizing Oscilloscopes

Digitizing Oscilloscopes Digitizing Oscilloscopes This document is meant to be a reference to the operation of the digitizing oscilloscopes available in the laboratories. Major topics will be covered, but not all the features

More information

USB Mini Spectrum Analyzer User Manual TSA Program for PC TSA4G1 TSA6G1 TSA8G1

USB Mini Spectrum Analyzer User Manual TSA Program for PC TSA4G1 TSA6G1 TSA8G1 USB Mini Spectrum Analyzer User Manual TSA Program for PC TSA4G1 TSA6G1 TSA8G1 Triarchy Technologies Corp. Page 1 of 17 USB Mini Spectrum Analyzer User Manual Copyright Notice Copyright 2013 Triarchy Technologies,

More information

Realizing Waveform Characteristics up to a Digitizer s Full Bandwidth Increasing the effective sampling rate when measuring repetitive signals

Realizing Waveform Characteristics up to a Digitizer s Full Bandwidth Increasing the effective sampling rate when measuring repetitive signals Realizing Waveform Characteristics up to a Digitizer s Full Bandwidth Increasing the effective sampling rate when measuring repetitive signals By Jean Dassonville Agilent Technologies Introduction The

More information

PicoScope 6407 Digitizer

PicoScope 6407 Digitizer YE AR HIGH PERFORMANCE USB DIGITIZER Programmable and Powerful 1 GHz bandwidth 1 GS buffer size 5 GS/s real-time sampling Advanced digital triggers Built-in function generator USB-connected Signals Analysis

More information

Digitizing Oscilloscopes (2009)

Digitizing Oscilloscopes (2009) Digitizing Oscilloscopes (2009) This document is meant to be a reference to the operation of the digitizing oscilloscopes available in the laboratories. Major topics will be covered, but not all the features

More information

Agilent DSO5014A Oscilloscope Tutorial

Agilent DSO5014A Oscilloscope Tutorial Contents UNIVERSITY OF CALIFORNIA AT BERKELEY College of Engineering Department of Electrical Engineering and Computer Sciences EE105 Lab Experiments Agilent DSO5014A Oscilloscope Tutorial 1 Introduction

More information

SNG-2150C User s Guide

SNG-2150C User s Guide SNG-2150C User s Guide Avcom of Virginia SNG-2150C User s Guide 7730 Whitepine Road Revision 001 Richmond, VA 23237 USA GENERAL SAFETY If one or more components of your earth station are connected to 120

More information

SC24 Magnetic Field Cancelling System

SC24 Magnetic Field Cancelling System SPICER CONSULTING SYSTEM SC24 SC24 Magnetic Field Cancelling System Makes the ambient magnetic field OK for the electron microscope Adapts to field changes within 100 µs Touch screen intelligent user interface

More information

Advanced Skills with Oscilloscopes

Advanced Skills with Oscilloscopes Advanced Skills with Oscilloscopes A Hands On Laboratory Guide to Oscilloscopes using the Rigol DS1104Z By: Tom Briggs, Department of Computer Science & Engineering Shippensburg University of Pennsylvania

More information

EASY-MCS. Multichannel Scaler. Profiling Counting Rates up to 150 MHz with 15 ppm Time Resolution.

EASY-MCS. Multichannel Scaler. Profiling Counting Rates up to 150 MHz with 15 ppm Time Resolution. Multichannel Scaler Profiling Counting Rates up to 150 MHz with 15 ppm Time Resolution. The ideal solution for: Time-resolved single-photon counting Phosphorescence lifetime spectrometry Atmospheric and

More information

Using an oscilloscope - The Hameg 203-6

Using an oscilloscope - The Hameg 203-6 Using an oscilloscope - The Hameg 203-6 What does an oscilloscope do? Setting up How does an oscilloscope work? Other oscilloscope controls Connecting a function generator Microphones audio signals and

More information

SC24 Magnetic Field Cancelling System

SC24 Magnetic Field Cancelling System SPICER CONSULTING SYSTEM SC24 SC24 Magnetic Field Cancelling System Makes the ambient magnetic field OK for the electron microscope Adapts to field changes within 100 µs Touch screen intelligent user interface

More information

Analyzing and Saving a Signal

Analyzing and Saving a Signal Analyzing and Saving a Signal Approximate Time You can complete this exercise in approximately 45 minutes. Background LabVIEW includes a set of Express VIs that help you analyze signals. This chapter teaches

More information

PCM ENCODING PREPARATION... 2 PCM the PCM ENCODER module... 4

PCM ENCODING PREPARATION... 2 PCM the PCM ENCODER module... 4 PCM ENCODING PREPARATION... 2 PCM... 2 PCM encoding... 2 the PCM ENCODER module... 4 front panel features... 4 the TIMS PCM time frame... 5 pre-calculations... 5 EXPERIMENT... 5 patching up... 6 quantizing

More information

Quick Reference Manual

Quick Reference Manual Quick Reference Manual V1.0 1 Contents 1.0 PRODUCT INTRODUCTION...3 2.0 SYSTEM REQUIREMENTS...5 3.0 INSTALLING PDF-D FLEXRAY PROTOCOL ANALYSIS SOFTWARE...5 4.0 CONNECTING TO AN OSCILLOSCOPE...6 5.0 CONFIGURE

More information

PC Scopes PCS500 PCS100 / K8031. CHECK THE Pc-Lab2000 TM GETTING STARTED GUIDE FOR SOFTWARE INSTALLATION

PC Scopes PCS500 PCS100 / K8031. CHECK THE Pc-Lab2000 TM GETTING STARTED GUIDE FOR SOFTWARE INSTALLATION PC Scopes PCS500 PCS100 / K8031 CHECK THE Pc-Lab2000 TM GETTING STARTED GUIDE FOR SOFTWARE INSTALLATION Reference Manual VELLEMAN Instruments is a division of VELLEMAN Components NV Legen Heirweg 33 9890

More information

2 MHz Lock-In Amplifier

2 MHz Lock-In Amplifier 2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Low-noise current and voltage inputs Touchscreen data display - large numeric

More information

DPScope SE User Manual

DPScope SE User Manual DPScope SE User Manual Version 1.0.0 Feb. 8, 2012 1 Introduction The DPScope SE is a low-cost, microcontroller based digital oscilloscope intended for hobby and educational use. If you are new to oscilloscopes,

More information

What to look for when choosing an oscilloscope

What to look for when choosing an oscilloscope What to look for when choosing an oscilloscope Alan Tong (Pico Technology Ltd.) Introduction For many engineers, choosing a new oscilloscope can be daunting there are hundreds of different models to choose

More information

Synthesized Clock Generator

Synthesized Clock Generator Synthesized Clock Generator CG635 DC to 2.05 GHz low-jitter clock generator Clocks from DC to 2.05 GHz Random jitter

More information

Experiment # 4 Counters and Logic Analyzer

Experiment # 4 Counters and Logic Analyzer EE20L - Introduction to Digital Circuits Experiment # 4. Synopsis: Experiment # 4 Counters and Logic Analyzer In this lab we will build an up-counter and a down-counter using 74LS76A - Flip Flops. The

More information

PC Scope PCS64i. PCS64i POWER DC ON AC

PC Scope PCS64i. PCS64i POWER DC ON AC PC Scope PCS64i CH1 CH2 PCS64i DC POWER DC AC 100Vp max. ON 100Vp max. AC CONTENTS 5 DIAGRAMS & SERVICE INFO 32 2 VELLEMAN KIT NV Legen Heirweg 33 9890 Gavere Belgium Internet Web-Site: http://www.velleman.be

More information

FOUR CHANNEL USB RECORDER PCRU01. User manual. Table of Contents

FOUR CHANNEL USB RECORDER PCRU01. User manual. Table of Contents FOUR CHANNEL USB RECORDER PCRU01 User manual Table of Contents Features 2 Specifications 2 hardware 2 software: 2 system requirements 2 Software installation 2 SAFETY and WARNINGS 3 Warranty 3 Connections

More information

Agilent 6000 Series Oscilloscope Demo Guide

Agilent 6000 Series Oscilloscope Demo Guide Agilent 6000 Series Oscilloscope Demo Guide Agilent 6000 Series Oscilloscope Demo Guide A series of portable oscilloscopes for today s and tomorrow s projects. In the next few minutes you will experience

More information

Beginners How to Test DSO138mini

Beginners How to Test DSO138mini Beginners How to Test DSO138mini You have finished assembling your DSO138mini kit. You may be anxious to see it works. But you might not be familiar with oscilloscope and you could encounter unexpected

More information

Getting started with Spike Recorder on PC/Mac/Linux

Getting started with Spike Recorder on PC/Mac/Linux Getting started with Spike Recorder on PC/Mac/Linux You can connect your SpikerBox to your computer using either the blue laptop cable, or the green smartphone cable. How do I connect SpikerBox to computer

More information

User Manual SDS1000DL/CNL/CML. Series Digital Oscilloscope V 1.2 SIGLENT TECHNOLOGIES CO,.LTD

User Manual SDS1000DL/CNL/CML. Series Digital Oscilloscope V 1.2 SIGLENT TECHNOLOGIES CO,.LTD User Manual SDS1000DL/CNL/CML Series Digital Oscilloscope V 1.2 SIGLENT TECHNOLOGIES CO,.LTD Declaration Copyright by SIGLENT TECHNOLOGIES CO,.LTD. All rights reserved. Contents in this Manual are not

More information

MTL Software. Overview

MTL Software. Overview MTL Software Overview MTL Windows Control software requires a 2350 controller and together - offer a highly integrated solution to the needs of mechanical tensile, compression and fatigue testing. MTL

More information

Embest DSO2300. Feature. General Description:

Embest DSO2300. Feature. General Description: Embest DSO2300 Feature General Description: DSO2300 is an intelligent two-channel PC based USB digital storage oscilloscope with high performance. It runs on any USB1.1 or USB2.0 equipped PC using Windows

More information

USB Mini Spectrum Analyzer User Manual PC program TSA For TSA5G35 TSA4G1 TSA6G1 TSA12G5

USB Mini Spectrum Analyzer User Manual PC program TSA For TSA5G35 TSA4G1 TSA6G1 TSA12G5 USB Mini Spectrum Analyzer User Manual PC program TSA For TSA5G35 TSA4G1 TSA6G1 TSA12G5 Triarchy Technologies, Corp. Page 1 of 17 USB Mini Spectrum Analyzer User Manual Copyright Notice Copyright 2013

More information

RF Record & Playback MATTHIAS CHARRIOT APPLICATION ENGINEER

RF Record & Playback MATTHIAS CHARRIOT APPLICATION ENGINEER RF Record & Playback MATTHIAS CHARRIOT APPLICATION ENGINEER Introduction Recording RF Signals WHAT DO WE USE TO RECORD THE RF? Where do we start? Swept spectrum analyzer Real-time spectrum analyzer Oscilloscope

More information