Obsolete Product(s) - Obsolete Product(s)

Size: px
Start display at page:

Download "Obsolete Product(s) - Obsolete Product(s)"

Transcription

1 L4937N DUAL MULTIFUNCTION OLTAGE REGULATOR STANDBY OUTPUT OLTAGE PRECISION 5 ± 2% OUTPUT 2 TRACKED TO THE STANDBY OUT- PUT OUTPUT 2 DISABLE FUNCTION FOR STANDBY MODE ERY LOW QUIESCENT CURRENT, LESS THAN 250µA, IN STANDBY MODE OUTPUT CURRENTS : I01 = 50mA, I02 = 500mA ERY LOW DROPOUT (max 0.4/0.6) OPERATING TRANSIENT SUPPLY OLTAGE UP TO 40 POWER-ON RESET CIRCUIT SENSING THE STANDBY OUTPUT OLTAGE. POWER-ON RESET DELAY PULSE DEFINED BY THE EXTERNAL CAPACITOR THERMAL SHUTDOWN AND SHORT CIRCUIT PROTECTIONS PIN CONNECTION (top view) Heptawatt ORDERING NUMBER : L4937N DESCRIPTION The L4937N is a monolithic integrated dual voltage regulators with two very low dropout outputs and additional functions such as power-on reset and input voltage sense. It is designed for supplying microcomputer controlled systems specially in automotive applications. June /9

2 BLOCK DIAGRAM THERMAL DATA Symbol Parameter alue Unit R thj-case Thermal Resistance Junction-Case Max. 3 C/W 2/9

3 ABSOLUTE MAXIMUM RATINGS Symbol Parameter alue Unit S DC Supply oltage 28 Transient Supply oltage (T < 1s) 40 T j, T stg Junction and Storage Temperature Range 55 to 150 C I EN Enable Input Current ( EN 0.3) ± 1 ma EN Enable Input oltage S RES Reset Output oltage 20 I RES Reset Output Current 5 ma P D Power Dissipation (T A = 80 C, R th heatsink = 9 C/W) 5 W Note : The circuit is ESD protected according to MIL STD 883C. APPLICATION CIRCUIT C S 1µF ; C 01 6µF ; C 02 10µF, ESR < 10Ω at 10KHz 3/9

4 ELECTRICAL CHARACTERISTICS (S = 14; 40 C Tj 125 C unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Unit S Operating Supply oltage 25 O1 Standby Output oltage 6 S mA I O1 50mA O2 - O1 Output oltage 2 Tracking Error (note 1) 6 S 25 5mA I O2 500mA Enable = LOW m DP1 Dropout oltage 1 I O1 = 10mA I O1 = 50mA IO1 Input to Output oltage Difference in Undervoltage Condition S = 4, I O1 = 35mA 0.4 DP2 Dropout oltage 2 IO2 = 100mA I O2 = 500mA IO2 Input to Output oltage Difference in Undervoltage Condition S = 4.6, I O2 = 350mA 0.6 OL 1.2 Line Regulation 6 S m I O1 = 1mA; I O2 = 5mA OLO1 Load Regulation 1 1mA I O1 50mA 25 m OLO2 Load Regulation 2 5mA I O2 500mA 50 m I LIM1 Current Limit 1 O1 = 4.5 O1 = 0 (note 2) ma ma I LIM2 Current Limit 2 O2 = ma I QSB Quiescent Current Standby Mode (output 2 disabled) I O1 = 0.3mA; T J < 100 C EN 2.4 S = µa S = µa I Q Quiescent Current I O1 = 50mA I O1 = 500mA 30 ma ENABLE ENL Enable Input LOW oltage (output 2 active) ENH Enable Input HIGH oltage ENhyst Enable Hysteresis m I EN Enable Input Current 0 < EN < < EN < µa µa 4/9

5 ELECTRICAL CHARACTERISTICS (continued) RESET Symbol Parameter Test Conditions Min. Typ. Max. Unit Rt Reset Low Threshold oltage S = 14 o o1-0.1 Rth Reset Threshold Hysteresis m t RD Reset Pulse Delay C T = 100nF; t R > 100µs ms t RR Reset Reaction Time C T = 100nF µs RL Reset Output LOW oltage R RES = 10KΩ to 01 S I LRES Reset Output HIGH Leakage RES = 5 1 µa CTth Delay Comparator Threshold 2.0 CTth, hyst Delay Comparator Threshold Hysteresis 100 m Note : 1 : O2 connected to ADJ. O2 can be set to higher values by inserting an external resistor divider. 2 : Foldback characteristic FUNCTIONAL DESCRIPTION The L4937N is based on the SGS-THOMSON Microelectronics modular voltage regulator approach. Several out-standing features and auxiliary functions are provided to meet the requirements of supplying the microprocessor systems used in automotive applications. Furthermore the device is suitable also in other applications requiring two stabilized voltages. The modular approach allows other features and functions to be realized easily when required. STANDBY REGULATOR The standby regulator uses an Isolated Collector ertical PNP transistor as the regulating element. This structure allows a very low dropout voltage at currents up to 50mA. The dropout operation of the standby regulator is maintained down to 2 input supply voltage. The output voltage is regulated up to the transient input supply voltage of 40. This feature avoids functional interruptions which could be generated by overvoltage pulses. The typical curve of the standby output voltage as a function of the input supply voltage is shown in fig. 1. The current consumption of the device (quiescent current) is less than 250µA when output 2 is disabled (standby mode). The dropout voltage is controlled to reduce the quiescent current peak in the undervoltage region and to improve the transient response in this region. The quiescent current is shown in fig. 2 as a function of the supply input voltage 2. OUTPUT 2 OLTAGE The output 2 regulator uses the same output structure as the standby regulator, but rated for an output current of 500mA. The output 2 regulator works in tracking mode with the standby output voltage as a reference voltage. The output 2 regulator can be switched off via the Enable input. 5/9

6 Figure 1 : Output oltage vs. Input oltage. Figure 2 : Quiescent Current vs. Supply oltage. RESET CIRCUIT The block circuit diagram of the reset circuit is shown in fig. 3. The reset circuit supervises the standby output voltage. The reset threshold of 4.7 is defined by the internal reference voltage and the standby output divider. The reset pulse delay time trd, is defined by the charge time of an external capacitor CT : trd = CT x 2 2µA The reaction time of the reset circuit depends on the discharge time limitation of the reset capacitor CT and is proportional to the value of CT. The reaction time of the reset circuit increases the noise immunity. In fact, if the standby output voltage drops below the reset threshold for a time shorter than the reaction time trr, no reset output variation occurs. The nominal reset delay is generated for standby output voltage drops longer than the time necessary for the complete discharging of the capacitor CT. This time is typically equal to 50µs if CT = 100nF. The typical reset output waveforms are shown in fig. 6/9

7 Figure 3 : Block Diagram of the Reset Circuit. Figure 4 : Typical Reset Output Waveforms. OUT1 RT +0.2 RT INPUT OUT1 1.5 RESET t R t RD t RD t RR D95AT216 7/9

8 DIM. mm inch MIN. TYP. MAX. MIN. TYP. MAX. A C D D E E F F G G G H H L L L L L L L L L M M (typ.) Dia A C L5 D1 L L1 L2 L3 D Heptawatt H3 H1 OUTLINE AND MECHANICAL DATA E M1 M F E1 E G G1 G2 L9 H2 4 Dia. L7 L4 H2 F1 F L6 HEPTAMEC 8/9

9 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2000 STMicroelectronics Printed in Italy All Rights Reserved HEPTAWATT is a Trademark of STMicroelectronics STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. 9/9

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) L4902A DUAL 5 REGULATOR WITH RESET AND DISABLE DOUBLE BATTERY OPERATING OUTPUT CURRENTS : I01 = 300 ma I02 = 300 ma FIXED PRECISION OUTPUT OLTAGE 5 ± 2 % RESET FUNCTION CONTROLLED BY INPUT OLTAGE AND OUTPUT

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) BUL310 HIGH OLTAGE FAST-SWITCHING NPN POWER TRANSISTOR STMicroelectronics PREFERRED SALESTYPE NPN TRANSISTOR HIGH OLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD FOR RELIABLE

More information

BUL128 HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

BUL128 HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR BUL128 HIGH OLTAGE FAST-SWITCHING NPN POWER TRANSISTOR STMicroelectronics PREFERRED SALESTYPE NPN TRANSISTOR HIGH OLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD FOR RELIABLE

More information

Symbol Parameter Value Unit V CES Collector-Emitter Voltage (V BE = 0) 700 V V CEO Collector-Emitter Voltage (I B = 0) 400 V Emitter-Base Voltage

Symbol Parameter Value Unit V CES Collector-Emitter Voltage (V BE = 0) 700 V V CEO Collector-Emitter Voltage (I B = 0) 400 V Emitter-Base Voltage STD3003 HIGH OLTAGE FAST-SWITCHING NPN POWER TRANSISTOR REERSE PINS OUT s STANDARD IPAK (TO-25) / DPAK (TO-252) PACKAGES MEDIUM OLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD

More information

BUL1203EFP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

BUL1203EFP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR BUL1203EFP HIGH OLTAGE FAST-SWITCHING NPN POWER TRANSISTOR HIGH OLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD FOR RELIABLE OPERATION ERY HIGH SWITCHING SPEED FULLY INSULATED

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Features ERY LOW COLLECTOR TO EMITTER SATURATION OLTAGE D.C. CURRENT GAING, h FE > 100 5 A CONTINUOUS COLLECTOR CURRENT SOT-223 PLASTIC PACKAGE FOR SURFACE MOUNTING CIRCUITS AAILABLE IN TAPE & REEL PACKING

More information

L4909 EXTERNALLY ADJUSTABLE MULTIFUNCTION REGULATOR

L4909 EXTERNALLY ADJUSTABLE MULTIFUNCTION REGULATOR EXTERNALLY ADJUSTABLE MULTIFUNCTION REGULATOR 3 OUTPUTS Vo1 : output voltage variable from 5 to 12 V; limit current : 1.2 A. Vo2 : output voltage variable from 5 to 12 V; limit current : 1.2 A. Vo3 : output

More information

STEVAL-ISA001V1. 6W Dual Output Supply using VIPer12A. Features. Blue angel. Applications

STEVAL-ISA001V1. 6W Dual Output Supply using VIPer12A. Features. Blue angel. Applications Features Switch mode General Purpose Power Supply Input: 85 to 264 VAC @ 50/60 Hz Output: 12V @ 0.5A Output Power (peak) 6W Burst Mode Operation in Standby for Blue Angel operation Current Mode Control

More information

TEA6425 VIDEO CELLULAR MATRIX

TEA6425 VIDEO CELLULAR MATRIX IDEO CELLULAR MATRIX 6 ideo Inputs - 8 ideo Outputs Internal Selectable YC Adders MHz Bandwidth @ -db Selectable 0./6.dB Gain FOR EACH Output High Impedance Switch for each Output (- state operation) Programmable

More information

HCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION

HCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAYS EQUIVALENT AC OUTPUT

More information

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER HIGH OR LOW MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate at

More information

HD1530FX. High Voltage NPN Power Transistor for High Definition and New Super-Slim CRT Display. Features. Applications. Internal Schematic Diagram

HD1530FX. High Voltage NPN Power Transistor for High Definition and New Super-Slim CRT Display. Features. Applications. Internal Schematic Diagram High Voltage NPN Power Transistor for High Definition and New Super-Slim CRT Display Features STATE-OF-THE-ART TECHNOLOGY: DIFFUSED COLLECTOR ENHANCED GENERATION EHVS1 WIDER RANGE OF OPTIMUM DRIVE CONDITIONS

More information

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE INDIVIDUAL CLOCK LINES FOR COUNTING UP OR COUNTING DOWN SYNCHRONOUS HIGH-SPEED CARRY AND BORROW PROPAGATION DELAYS FOR CASCADING ASYNCHRONOUS

More information

L9822E OCTAL SERIAL SOLENOID DRIVER

L9822E OCTAL SERIAL SOLENOID DRIVER L9822E OCTAL SERIAL SOLENOID DRIVER EIGHT LOW RDSon DMOS OUTPUTS (0.5Ω AT IO = 1A @ 25 C VCC = 5V± 5%) 8 BIT SERIAL INPUT DATA (SPI) 8 BIT SERIAL DIAGNOSTIC OUTPUT FOR OVERLOAD AND OPEN CIRCUIT CONDITIONS

More information

STW High voltage fast-switching NPN power transistor. Features. Application. Description

STW High voltage fast-switching NPN power transistor. Features. Application. Description High voltage fast-switching NPN power transistor Features Low spread of dynamic parameters High voltage capability Minimum lot-to-lot spread for reliable operation ery high switching speed Application

More information

BYT230PIV-1000 BYT231PIV-1000

BYT230PIV-1000 BYT231PIV-1000 BYT230PIV-1000 BYT231PIV-1000 FAST RECOVERY RECTIFIER DIODES MAIN PRODUCT CHARACTERISTICS K2 A2 A2 K1 IF(AV) 2 x 30 A VRRM VF (max) trr (max) 1000 V 1.8 V 80 ns K1 A1 BYT231PIV-1000 K2 A1 BYT230PIV-1000

More information

STTH8003CY HIGH FREQUENCY SECONDARY RECTIFIERS MAJOR PRODUCTS CHARACTERISTICS. 2x40 A 300 V. V F (max) FEATURES AND BENEFITS

STTH8003CY HIGH FREQUENCY SECONDARY RECTIFIERS MAJOR PRODUCTS CHARACTERISTICS. 2x40 A 300 V. V F (max) FEATURES AND BENEFITS STTH83CY HIGH FREQUENCY SECONDARY RECTIFIERS MAJOR PRODUCTS CHARACTERISTICS I F(AV) V RRM V F (max) trr (max) 2x4 A 3 V 1 V 6 ns FEATURES AND BENEFITS n COMBINES HIGHEST RECOVERY AND VOLTAGE PERFORMANCE.

More information

STTH302 HIGH EFFICIENCY ULTRAFAST DIODE MAIN PRODUCT CHARACTERISTICS I F(AV) 3A 200 V Tj (max) 175 C

STTH302 HIGH EFFICIENCY ULTRAFAST DIODE MAIN PRODUCT CHARACTERISTICS I F(AV) 3A 200 V Tj (max) 175 C STTH32 HIGH EFFICIENCY ULTRAFAST DIODE MAIN PRODUCT CHARACTERISTICS I F(AV) V RRM 3A 2 V Tj (max) 175 C V F (max).75 V trr (max) 35 ns FEATURES AND BENEFITS Very low conduction losses Negligible switching

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) OCTAL BUS TRANSCEIVER/REGISTER WITH 3 STATE OUTPUTS HIGH SPEED: f MAX = 60 MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.)

More information

DESCRIPTION High voltage Schottky rectifier suited for SLIC protection during the card insertion operation. SOT-23 (Plastic)

DESCRIPTION High voltage Schottky rectifier suited for SLIC protection during the card insertion operation. SOT-23 (Plastic) BR46 BR46FILM SMLL SIGNL SCHOTTKY DIODES FETURES ND BENEFITS VERY SMLL CONDUCTION LOSSES NEGLIGIBLE SWITCHING LOSSES LOW FORWRD VOLTGE DROP SURFCE MOUNT DEVICE K N.C. K1 BR46 K2 BR46 DESCRIPTION High voltage

More information

TDA2320 PREAMPLIFIER FOR INFRARED REMOTE CONTROL SYSTEMS

TDA2320 PREAMPLIFIER FOR INFRARED REMOTE CONTROL SYSTEMS WIDE SUPPLY VOLTAGE RAGE: 4 TO 20V SIGLE OR SPLIT SUPPLY OPERATIO VERY LOW CURRET COSUMPTIO: 0.8mA VERY LOW DISTORTIO: 0.03% TYPICA DESCRIPTIO The TDA2320 is a monolithic integrated circuit in Dip package

More information

EMIF QCF 4 LINE LOW CAPACITANCE EMI FILTER AND ESD PROTECTION IPAD

EMIF QCF 4 LINE LOW CAPACITANCE EMI FILTER AND ESD PROTECTION IPAD IPAD EMIF04-1502QCF 4 LINE LOW CAPACITANCE EMI FILTER AND ESD PROTECTION MAIN PRODUCT CHARACTERISTICS: Where EMI filtering in ESD sensitive equipment is required : LCD and camera for Mobile phones Computers

More information

HCC4054B/55B/56B HCF4054B/55B/56B

HCC4054B/55B/56B HCF4054B/55B/56B HCC454B/55B/56B HCF454B/55B/56B LIQUID-CRYSTAL DISPLAY DRIERS 454B 4-SEGMENT DISPLAY DRIER - STROBED LATCH FUNCTION 455B BCD TO 7-SEGMENT DECODER/DRIER, WITH DIS- PLAY-FREQUENCY OUTPUT 456B BCD TO 7-SEGMENT

More information

300MHz Single Supply Video Amplifier with Low In/Out Rail -IN -IN +IN +IN -VCC. Part Number Temperature Range Package Packaging Marking TSH341ILT

300MHz Single Supply Video Amplifier with Low In/Out Rail -IN -IN +IN +IN -VCC. Part Number Temperature Range Package Packaging Marking TSH341ILT 3MHz Single Supply Video Amplifier with Low In/Out Rail Bandwidth: 3MHz Single supply operation down to 3V Low input & output rail Very low harmonic distortion Slew rate: 4V/µs Voltage Input noise: 7nV/

More information

TSH MHz Single Supply Video Buffer with Low In/Out Rail. Pin Connections (top view) Description. Applications. Order Codes

TSH MHz Single Supply Video Buffer with Low In/Out Rail. Pin Connections (top view) Description. Applications. Order Codes TSH34 3MHz Single Supply Video Buffer with Low In/Out Rail Bandwidth: 3MHz Single supply operation down to 3V Low input & output rail Very low harmonic distortion Slew rate: 78V/µs Voltage input noise:

More information

TA0311 TECHNICAL ARTICLE High Temperature Electronics 1 Introduction 2 Why the need for high-temperature semiconductors?

TA0311 TECHNICAL ARTICLE High Temperature Electronics 1 Introduction 2 Why the need for high-temperature semiconductors? TECHNICAL ARTICLE High Temperature Electronics 1 Introduction In the semiconductor world, there are numerous products specified with an industrial temperature range (-40/+85 C), and somewhat fewer with

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) IPAD TM 3 LINES EMI FILTER AND ESD PROTECTION MAIN PRODUCT APPLICATIONS EMI filtering and ESD protection for : SIM Interface (Subscriber Identify Module) UIM Interface (Universal Identify Module) DESCRIPTION

More information

AN555 APPLICATION NOTE AUTOMOTIVE PROTECTION WITH THE RBOxx SERIES

AN555 APPLICATION NOTE AUTOMOTIVE PROTECTION WITH THE RBOxx SERIES APPLICATION NOTE AUTOMOTIVE PROTECTION WITH THE RBOxx SERIES INTRODUCTION The harsh electrical environment in automobiles poses problems for the electronic modules present. Even in normal operation, large

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) DC-DC step down power supply Features Module DC-DC step down single output Wide range input voltage: 100 370 V dc Output power: 4.0 W typ. Output voltage precision 5% Output short-circuit protection No

More information

Technical Article. TD350 IGBT driver IC including advanced control and protection functions. Introduction. Device description

Technical Article. TD350 IGBT driver IC including advanced control and protection functions. Introduction. Device description Technical Article IGBT driver IC including advanced control and protection functions by Jean-Francois Garnier, Standard Linear Division, STMicroelectronics Introduction New IGBT Driver IGBT devices play

More information

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E Features N-channel enhancement-mode lateral MOSFETs Excellent thermal stability Frequency: 1030 MHz Supply voltage:

More information

DB W. 60W / 26V / MHz PA using 1x PD57070S The LdmoST FAMILY. General Features. Description. Order Code

DB W. 60W / 26V / MHz PA using 1x PD57070S The LdmoST FAMILY. General Features. Description. Order Code 60W / 26V / 925-960 MHz PA using 1x PD57070S The LdmoST FAMILY General Features EXCELLENT THERMAL STABILITY COMMON SOURCE CONFIGURATION P OUT = 60W WITH 13 db GAIN OVER 925-960 MHz 10:1 LOAD VSWR CAPABILITY

More information

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9 DC-DC step down power supply Preliminary Data Features Module DC-DC step down single output Wide range input voltage 100 370 V dc Output power 8W max Output voltage precision 5% Output short circuit protection

More information

Order code Package Packing

Order code Package Packing RF power transistor, LdmoST plastic family N-channel enhancement-mode, lateral MOSFETs Features Excellent thermal stability Common source configuration P OUT = 8 W with 11.5dB gain @ /7.5 V New RF plastic

More information

Obsolete Product(s) - Obsolete Product(s) STV6432 Audio/Video Output Buffers for STB and DVD Devices FEATURES DESCRIPTION

Obsolete Product(s) - Obsolete Product(s) STV6432 Audio/Video Output Buffers for STB and DVD Devices FEATURES DESCRIPTION Audio/Video Output Buffers for STB and DVD Devices FEATURES VIDEO SECTION Y/C/CVBS Inputs Y/C Outputs for TV 4 CVBS Outputs (for TV, VCR, Aux and RF Modulator) 6 db Gain with Fine Adjustment Integrated

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 1 Introduction TA0319 TECHNICAL ARTICLE New Damper Diodes Family for CRT TV & CRT Monitor The Coolest Damper Diodes STMicroelectronics is well established in the CRT Monitor and CRT TV market and is known

More information

Mechanical specification. October 2010 Doc ID Rev 1 1/10

Mechanical specification. October 2010 Doc ID Rev 1 1/10 Portable UHF 2-way radio demonstration board based on the PD84001 Preliminary data Features Excellent thermal stability Frequency: 380-520 MHz Supply voltage: 7.2 V Output power: 1 W Power gain: 15.5 ±

More information

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description Demonstration board using the PD84008L-E for 900 MHz 2-way radio Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 5 W Power gain: 11 ± 1.0 db Efficiency:

More information

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description Portable UHF 2-way radio demonstration board based on the PD84006L-E Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 4 W Power gain: 12.3 ± 0.3 db Efficiency:

More information

EMIF02-SPK01F2 2 LINE EMI FILTER AND ESD PROTECTION Low-pass Filter Input Output Ri/o = 10 Ω Cline = 200 pf GND GND GND

EMIF02-SPK01F2 2 LINE EMI FILTER AND ESD PROTECTION Low-pass Filter Input Output Ri/o = 10 Ω Cline = 200 pf GND GND GND IPAD EMIF02-SPK01F2 2 LINE EMI FILTER AND ESD PROTECTION MAIN PRODUCT CHARACTERISTICS: Where EMI filtering in ESD sensitive equipment is required : Mobile phones and communication systems Computers, printers

More information

8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI

8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI 8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI Memories.5K bytes single voltage Flash Program memory with read-out protection, In-Circuit Programming and In-Application Programming

More information

AN442 APPLICATION NOTE

AN442 APPLICATION NOTE AN442 APPLICATION NOTE TRIAC & MICROCONTROLLERS: THE EASY CONNECTION INTRODUCTION The aim of this note is to show how to connect an ST triac and an ST microcontroller. CONVENTIONAL SOLUTION For many years

More information

AN3075 Application note

AN3075 Application note Application note Demonstration board user guidelines for the STC3100 battery monitor for gas gauge applications Introduction This application note describes the STEVAL-ISB009V1, a demonstration board specifically

More information

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards Automotive very low capacitance ESD protection Datasheet production data Features 4 data-line protection Protects V BUS Very low capacitance: 3 pf Very low leakage current: 10 na SOT23-6L package RoHS

More information

Power Supply and Watchdog Timer Monitoring Circuit ADM9690

Power Supply and Watchdog Timer Monitoring Circuit ADM9690 a FEATURES Precision Voltage Monitor (4.31 V) Watchdog Timeout Monitor Selectable Watchdog Timeout 0.75 ms, 1.5 ms, 12.5 ms, 25 ms Two RESET Outputs APPLICATIONS Microprocessor Systems Computers Printers

More information

STEVAL-CCA043V1. 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV. Features. Description

STEVAL-CCA043V1. 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV. Features. Description 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV Features High output-power capability: 25 W / 6 Ω at 16 V, 1 KHz,THD = 10% 20 W / 8 Ω at 18 V, 1 KHz, THD = 10% Wide-range,

More information

EMIF C2 IPAD. 6 line EMI filter and ESD protection. Main product characteristics. Description. Order Code. Benefits

EMIF C2 IPAD. 6 line EMI filter and ESD protection. Main product characteristics. Description. Order Code. Benefits IPAD 6 line EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: Mobile phones and communication systems Computers, printers and MCU Boards

More information

STA2051E VESPUCCI 32-BIT SINGLE CHIP BASEBAND CONTROLLER FOR GPS AND TELEMATIC APPLICATIONS 1 FEATURES. Figure 1. Packages

STA2051E VESPUCCI 32-BIT SINGLE CHIP BASEBAND CONTROLLER FOR GPS AND TELEMATIC APPLICATIONS 1 FEATURES. Figure 1. Packages STA2051 VESPUCCI 32-BIT SINGLE CHIP BASEBAND CONTROLLER FOR GPS AND TELEMATIC APPLICATIONS DATA BRIEF 1 FEATURES ARM7TDMI 16/32 bit RISC CPU based host microcontroller. Complete Embedded Memory System:

More information

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features product evaluation board Data brief R3 (cathode) resistor set to 6.8 kω, with a power supply voltage of 3.3 V this gives a cathode current of about 110 μa If RHF1009A device is soldered onto the, Cn1 is

More information

USBLC6-2SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

USBLC6-2SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards Automotive very low capacitance ESD protection Datasheet production data Features 2 data lines protected Protects V BUS Very low capacitance: 2.5 pf Very low leakage current: 10 na SOT23-6L package RoHS

More information

EVAL6208Q. Stepper motor driver mounting the L6208Q. Features. Description

EVAL6208Q. Stepper motor driver mounting the L6208Q. Features. Description Stepper motor driver mounting the L6208Q Data brief AM11912v1 Features Voltage range from 8 to 52 V Phase current up to 2.5 A r.m.s. Adjustable PWM current control OFF-time Logic inputs 5 V / 3.3 V compliant

More information

TN0885 Technical note

TN0885 Technical note TN0885 Technical note New I 2 PAKFP (TO-281) package, practical approach for compact and slim product design needs Introduction STMicroelectronics has introduced a new package family, I 2 PAKFP, which

More information

STEVAL-ILH005V W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2. Features. Description

STEVAL-ILH005V W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2. Features. Description 150 W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2 Data brief Features Minimum mains voltage: V ac(min) = 185 V Maximum mains voltage: V ac(min) = 265 V Minimum mains frequency:

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) L6563 80W High performancetm PFC with active tracking boost function General description Data Brief L6563 is a current-mode PFC controller operating in Transition Mode (TM). Based on the core of a standard

More information

ZLNB101 DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER ISSUE 1- JANUARY 2001 DEVICE DESCRIPTION FEATURES APPLICATIONS

ZLNB101 DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER ISSUE 1- JANUARY 2001 DEVICE DESCRIPTION FEATURES APPLICATIONS DUAL POLARISATION SWITCH TWIN LNB MULTIPLEX CONTROLLER ISSUE - JANUARY 00 ZLNB0 DEICE DESCRIPTION The ZLNB0 dual polarisation switch controller is one of a wide range of satellite receiver LNB support

More information

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description Features Evaluation board for the M24LR16E-R dual interface EEPROM 20 mm x 40 mm 13.56 MHz inductive antenna etched on PCB M24LR16E-R dual interface EEPROM I²C connector Energy harvesting output (V OUT

More information

STEVAL-IHM043V1. 6-step BLDC sensorless driver board based on the STM32F051 and L6234. Features. Description

STEVAL-IHM043V1. 6-step BLDC sensorless driver board based on the STM32F051 and L6234. Features. Description 6-step BLDC sensorless driver board based on the STM32F051 and L6234 Features Input voltage range: 7 to 42 V dc Output current: 2 A (5 A peak) Can operate up to 100% duty cycle RoHS compliant Description

More information

EMIF02-USB05F2 IPAD. 2 line EMF filter including ESD protection. Main application. Description. Pin configuration (bump side) Benefits

EMIF02-USB05F2 IPAD. 2 line EMF filter including ESD protection. Main application. Description. Pin configuration (bump side) Benefits IPAD 2 line EMF filter including ESD protection Main application When EMI filtering is ESD sensitive equipment is required: Mobile phones and communication systems Computers, printers and MCU boards Description

More information

UM0534 User manual. STEVAL-MKI014V1 demonstration kit for the LIS344ALH. Introduction

UM0534 User manual. STEVAL-MKI014V1 demonstration kit for the LIS344ALH. Introduction UM054 User manual STEVAL-MKI04V demonstration kit for the LIS44ALH Introduction The STEVAL-MKI04V is a demonstration kit designed to provide the user with a complete, ready-to-use platform for the evaluation

More information

PART TEMP RANGE PIN-PACKAGE

PART TEMP RANGE PIN-PACKAGE General Description The MAX6701 microprocessor (µp) supervisory circuits reduce the complexity and components required to monitor power-supply functions in µp systems. These devices significantly improve

More information

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description Features 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60 Data brief Min. input voltage: 125 VDC or 90 VAC Max. input voltage: 400 VDC or 285 VAC Max. output power for

More information

V6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver

V6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver EM MICROELECTRONIC - MARIN SA 2, 4 and 8 Mutiplex LCD Driver Description The is a universal low multiplex LCD driver. The version 2 drives two ways multiplex (two blackplanes) LCD, the version 4, four

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Power over ethernet 10 W module Preliminary data Features Input voltage range: 38.5 V to 60 V 10 W output Based on ST devices integrating standard PoE interface and current mode PVM controller IEEE 802.3af

More information

Very low-noise, high-efficiency DC-DC conversion circuit

Very low-noise, high-efficiency DC-DC conversion circuit DN0013 Design note Very low-noise, high-efficiency DC-DC conversion circuit Designs from our labs describe tested circuit designs from ST labs which provide optimized solutions for specific applications.

More information

STEVAL-ILL029V1. Front panel demonstration board based on the STLED325 and STM8S. Features. Description

STEVAL-ILL029V1. Front panel demonstration board based on the STLED325 and STM8S. Features. Description Front panel demonstration board based on the STLED325 and STM8S Data brief Features 4-digit, 7-segment (with decimal point) LED display 8 discrete LEDs 8 front panel keys for control of channel, brightness

More information

MAX7461 Loss-of-Sync Alarm

MAX7461 Loss-of-Sync Alarm General Description The single-channel loss-of-sync alarm () provides composite video sync detection in NTSC, PAL, and SECAM standard-definition television (SDTV) systems. The s advanced detection circuitry

More information

STEVAL-ILH004V1. 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2. Features. Description

STEVAL-ILH004V1. 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2. Features. Description 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2 Data brief Features Minimum mains voltage (rms value): 85 V Maximum mains voltage (rms value) : 265 V Minimum mains

More information

STEVAL-ISA121V1. Wide range single-output demonstration board based on the VIPER37LE. Features. Description

STEVAL-ISA121V1. Wide range single-output demonstration board based on the VIPER37LE. Features. Description Wide range single-output demonstration board based on the VIPER37LE Data brief Features Universal input mains range: input voltage 90-264 V AC frequency 45-65 Hz Single-output voltage: 5 V @ 3 A continuous

More information

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description Advanced resistive touchscreen controller demonstration board based on the STMPE811 Data brief Features Four-wire resistive touch-sensing demonstration GUI Configurable touch-sensing parameters STMPE811

More information

STEVAL-ILL043V1. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings. Features.

STEVAL-ILL043V1. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings. Features. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings Features Data brief Mains voltage range V ACmin = 165V ac, V ACmax = 277 V ac Minimum mains frequency f

More information

2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package

2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package 2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package Data brief light for the same input power when driven above 20 khz, instead of 50/60

More information

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument

More information

NJU7241 Series. High-Precision LDO 60mA C-MOS Voltage Regulator with Standby TERMINAL DESCRIPTION PACKAGE OUTLINE

NJU7241 Series. High-Precision LDO 60mA C-MOS Voltage Regulator with Standby TERMINAL DESCRIPTION PACKAGE OUTLINE High-Precision LDO 60mA C-MOS oltage Regulator with Standby GENERAL DESCRIPTION The NJU7241 series are high precision ±2%, 60mA output, C-MOS voltage regulators with standby function, which contains internal

More information

Description. Table 1. Device summary. Order codes Temperature range [ C] Package Packing. LPS2HBTR -30 to +105 HLGA - 10L

Description. Table 1. Device summary. Order codes Temperature range [ C] Package Packing. LPS2HBTR -30 to +105 HLGA - 10L MEMS pressure sensor: 260-1260 hpa absolute digital output barometer Applications Data brief Altimeter and barometer for portable devices GPS applications Weather station equipment Indoor navigation (Altitude

More information

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A Features Data brief Wide DC input voltage: 10 V to 28 V Integrated boost

More information

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32 Data Brief Features Two STP24DP05 devices (TQFP48 package) connected to 3 X 16 RGB high brightness LEDs STM32 microcontroller

More information

STEVAL-CCH002V2. HDMI and video switches demonstration board. Features. Description

STEVAL-CCH002V2. HDMI and video switches demonstration board. Features. Description HDMI and video switches demonstration board Data brief Features 16-character x 2-line alphanumeric backlit LCD VGA input and output connectors S-video input and output connectors Y Pb Pr input and output

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Features Camera with ZigBee connectivity based on the STM32 STM32-based camera with ZigBee connectivity Includes microsd card and ZigBee module Works with monitoring unit (order code STEVAL-CCM003V1) Camera

More information

STEVAL-IHT005V2. Demonstration board with full 3.3 V ACS/Triac control using the STM32F100. Description. Features

STEVAL-IHT005V2. Demonstration board with full 3.3 V ACS/Triac control using the STM32F100. Description. Features Demonstration board with full 3.3 V ACS/Triac control using the STM32F100 Data brief IEC 61000-4-4 pre-compliance test passed (burst up to 8 kv) IEC 61000-4-5 pre-compliance test passed (surge up to 2

More information

STEVAL-IFN003V1. PMSM FOC motor driver based on the L6230 and STM32F103. Features. Description

STEVAL-IFN003V1. PMSM FOC motor driver based on the L6230 and STM32F103. Features. Description STEVAL-IFN003V1 Features PMSM FOC motor driver based on the L6230 and STM32F103 Data brief Input range: 8 V up to 48 V (up to 45 W) STMicroelectronics ARM Cortex-M3 corebased STM32F103 microcontroller

More information

L7208. Portable consumer electronics spindle and VCM motor controller. General features. Spindle driver. Description. VCM driver.

L7208. Portable consumer electronics spindle and VCM motor controller. General features. Spindle driver. Description. VCM driver. Portable consumer electronics spindle and VCM motor controller General features Register Based Architecture 3 wire serial port up to 50MHz Ultra-thin package Data Brief Spindle driver 0.5A peak current

More information

Agilent 87405C 100 MHz to 18 GHz Preamplifier

Agilent 87405C 100 MHz to 18 GHz Preamplifier Agilent 8745C 1 MHz to 18 GHz Preamplifier Technical Overview Key Features Rugged, portable design for ease of use in the field Probe-power bias connection eliminates the need for an additional power supply

More information

GM60028H. DisplayPort transmitter. Features. Applications

GM60028H. DisplayPort transmitter. Features. Applications DisplayPort transmitter Data Brief Features DisplayPort 1.1a compliant transmitter HDCP 1.3 support DisplayPort link comprising four main lanes and one auxiliary channel Output bandwidth sufficient to

More information

March 2012 Doc ID Rev 1 1/4

March 2012 Doc ID Rev 1 1/4 2 x 28 W electronic ballast with active PFC based on the STD3N62K3 and STD845DN40 BJT devices Data brief production data Features Input voltage range: 180 Vac to 264 Vac Nominal output voltage: 400 V Nominal

More information

STEVAL-ISB008V1. Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6. Features.

STEVAL-ISB008V1. Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6. Features. Features Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6 Data brief The STw4102 Li-Ion battery charger IC: supports battery charging by USB or external DC

More information

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch Features 50 nominal input / conjugate match to nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch

More information

SPSGRF-868 / 915 SubGiga (868 or 915 MHz) programmable transceiver module Datasheet

SPSGRF-868 / 915 SubGiga (868 or 915 MHz) programmable transceiver module Datasheet -868 / 915 SubGiga (868 or 915 MHz) programmable transceiver module Datasheet Features Programmable Radio features - Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOk, ASK - Air data rate from 1 to 500 kbps

More information

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description Graphic panel with ZigBee features based on the STM32 and SPZBE260 module Data brief Features Microsoft FAT16/FAT32 compatible library JPEG decoder algorithm S-Touch -based touch keys for menu navigation

More information

GM68020H. DisplayPort receiver. Features. Applications

GM68020H. DisplayPort receiver. Features. Applications DisplayPort receiver Data Brief Features DisplayPort 1.1a compliant receiver HDCP 1.3 support DisplayPort link comprising four main lanes and one auxiliary channel Input bandwidth sufficient to receive

More information

DATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2.

DATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2. DATASHEET EL883 Sync Separator with Horizontal Output FN7 Rev 2. The EL883 video sync separator is manufactured using Elantec s high performance analog CMOS process. This device extracts sync timing information

More information

Main components Proximity and ambient light sensing (ALS) module

Main components Proximity and ambient light sensing (ALS) module DT0017 Design tip VL6180X interleaved mode explanation By Colin Ramrattan Main components VL6180X Proximity and ambient light sensing (ALS) module Purpose and benefits The purpose of this document is to

More information

STEVAL-ILL037V1. Demonstration board for the HVLED805 IC for LED power supply. Features. Description

STEVAL-ILL037V1. Demonstration board for the HVLED805 IC for LED power supply. Features. Description Demonstration board for the HVLED805 IC for LED power supply Data brief Features Input voltage: 90 Vac - 265 Vac Input frequency: 50 Hz - 60 Hz Output power: 3.2 W Expected efficiency: 85% Output voltage:

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Adapter board (daughter board for the STM3210C_EVAL) for a thermal printer based on the L293DD Data brief Features This application is designed for a connectivity line demonstration board. The thermal

More information

INTEGRATED CIRCUITS DATA SHEET. TDA4510 PAL decoder. Product specification File under Integrated Circuits, IC02

INTEGRATED CIRCUITS DATA SHEET. TDA4510 PAL decoder. Product specification File under Integrated Circuits, IC02 INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is a colour decoder for the PAL standard, which is pin sequent compatible with multistandard decoder

More information

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview

Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument

More information

DATA SHEET. TDA8433 Deflection processor for computer controlled TV receivers INTEGRATED CIRCUITS

DATA SHEET. TDA8433 Deflection processor for computer controlled TV receivers INTEGRATED CIRCUITS INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC02 August 1991 FEATURES I 2 C-bus interface Input for vertical sync Sawtooth generator with amplitude independent of frequency ertical deflection

More information

BAS70 series; 1PS7xSB70 series

BAS70 series; 1PS7xSB70 series BAS70 series; PS7xSB70 series Rev. 08 4 May 006 Product data sheet. Product profile. General description in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 5 29 May 2015 Product data sheet 1. Product profile 1.1 General description Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features.

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features. : IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter Features EEE 802.3at compliant Support for Gigabit Ethernet Data pass-through for the ethernet data Works with

More information

SDA 3302 Family. GHz PLL with I 2 C Bus and Four Chip Addresses

SDA 3302 Family. GHz PLL with I 2 C Bus and Four Chip Addresses GHz PLL with I 2 C Bus and Four Chip Addresses Preliminary Data Features 1-chip system for MPU control (I 2 C bus) 4 programmable chip addresses Short pull-in time for quick channel switch-over and optimized

More information