S6-R READER. Installation and Operating Instructions

Size: px
Start display at page:

Download "S6-R READER. Installation and Operating Instructions"

Transcription

1 Installation and Operating Instructions

2 The information provided in these installation instructions may be modified without prior notification. All previous versions cease to be valid with the publication of these instructions. The information in these installation instructions has been compiled in good faith and based on the best knowledge available to us. DORMA accepts no liability for the correctness and completeness of the details provided. In particular, DORMA cannot accept liability for any consequential damages due to incorrect or incomplete information. The recommendations for installation made in this manual are based on the assumption that prevailing basic conditions are favourable. DORMA accepts no liability for the perfect functioning of the S6-R Reader in external, non-system environments. Despite every effort to prevent mistakes, they can never be completely avoided. Therefore, we would be grateful to receive notification of any errors or omissions. DORMA accepts no liability for the information included in this document being free of protected third party rights. DORMA does not provide any licences for its own or third party patents or other protected rights with this document. It is not permitted to print, reproduce or to pass on this manual, or parts thereof, to third parties, other than for your own use, without the approval of DORMA. All rights reserved. DORMA Time + Access GmbH Postfach Bonn info@dorma-time-access.de Copyright 2014 by DORMA Time + Access GmbH

3 Contents 1. General Information Preface Correct usage Safety precautions Further Sources of Information Disposal Functional principle Read procedure S6-R Reader System55 delivery package S6-R Reader Protect delivery package S6-R Reader TX44 delivery package S6-R Reader Siedle 611 delivery package Installation accessories (optional) Installation Requirements for trouble-free operation Preparation RS485-Bus S6-R Reader System55 final installation TX44 final installation Protect final installation Front film for S6-R Reader Protect Siedle 611 final installation Commissioning Settings Signalling Service Firmware S6-R Reader System55 tampering protection Antenna trimmer Technical Data...19 EC Declaration of Conformity Connection of S6-R Readers Power supply...11 DORMA 3

4 1. General Information 1.1 Preface This installation manual is intended to help you connect and put into operation the S6-R Reader. 1.2 Correct usage This device is intended exclusively for use in attendance recording and access control systems. Further details are described in Chapter 1.6. Use for any other purpose than the one described is not permitted. 1.3 Safety precautions This device has been constructed and tested in accordance with all currently applicable technical regulations. It left the factory with all safety features in perfect working order. To maintain this condition and to ensure risk-free operation, the user must observe the instructions and warnings given in this operating manual. Installation and assembly of electrical equipment may only be carried out by a qualified electrician. During installation, please ensure that the requirements specified in the relevant equipment safety standard for the unit are adhered to since non-compliance could affect the safety of the device. Before switching on, ensure that the operating and control voltages connected do not exceed the permissible levels as specified in the technical data. This unit conforms to EN 60950, protection class III. The units must be operated using a safety extra-low voltage (SELV). Electromagnetic compatibility: The unit is designed for use in residential, commercial and light-industrial environments. The PCB can be damaged by static electricity discharge, so relevant precautionary measures must be observed, such as grounding. These units must not be operated until they are fully installed. If you believe that safe operation is no longer possible, take the unit out of operation and secure it against accidental use. If a failure or malfunction in the unit might result in injury to persons or animals or in damage to works equipment, such damage or injury must also be prevented by taking additional safety measures, such as installing limit switches and safety devices. Switch off the power supply before opening the device. 4 DORMA

5 1.4 Further Sources of Information The S6-R reader is operated within an access-control system. The documentation for the following system components must be observed. DORMA EAC hardware manual Access control software (host) 1.5 Disposal This device has been manufactured using high-quality materials and components that can be recycled. Information for EU Countries This device is subject to European Directive 2002/96 EC and therefore must be disposed of separately from household waste. As the manufacturer, we will take back our electric and electronic products and dispose of them for you free of charge. Alternatively, you may also contact your waste disposal company. 1.6 Functional principle The S6-R Reader reads ID card data using a contactless connection and sends data to a higher level control unit, where they are evaluated to check whether the ID card is authorised or not. The result is sent to the S6-R Reader, which emits a visual and audible signal to indicate authorisation or not. The control unit communicates with the S6-R Readers via an RS485 bus. DORMA 5

6 ST Read procedure The type of read procedure supported is indicated by the type key on the nameplate. The positions of the nameplate are shown in the graphics to the right. S6-R-Reader System55 S6-R-Reader TX44 5P93EN2N1 Code PX51 PX71 PX10 Leseverfahren Legic advant / prime Mifare Desfire / Classic Hitag S6R-0-G#-PX##P V 9V-40VDC, 110mA-30mA ## XXXXXXXX-XXXXX-XXX XX S6-R-Reader Protect S6-R-Reader Siedle DORMA

7 1.8 S6-R Reader System55 delivery package A 1x S6-R-Reader System55 B 1x manual A B S6-R READER Installation and Operating Instructions 1.9 S6-R Reader Protect delivery package A 1x reader with 4 m connection cable B 1x manual C 1x front foil D 2x Spax screws (3 x 30 mm) E 2x plastic wall plugs (6 mm) F 2x tapping screws (3.2 x 25 mm) A B C S6-R READER Installation and Operating Instructions D F 2x 2x E 2x 1.10 S6-R Reader TX44 delivery package A 1x Surface-mount casing TX44 B 1x S6-R-Reader C 1x manual A B C S6-R READER Installation and Operating Instructions DORMA 7

8 1.11 S6-R Reader Siedle 611 delivery package A 1x S6-R-Reader Siedle 611 B 1x manual A B S6-R READER Installation and Operating Instructions 1.12 Installation accessories (optional) A S6-R Reader Protect spacer frame (Item no ). The spacer frame enables the reader to be surface-mounted or mounted on metal plates (see Chapter 2.7). A C B Surface-mount casing for S6-R Reader System55 1) The surface-mount casing is used to surface-mount S6-R Reader System55. C System55 combination frame 1) 2) The combination frame is always required whenever the reader is flush-mounted. B You can find more installation accessories in our catalogues. 1) Available in different colours 2) Single or multiple frame 8 DORMA

9 2. Installation 2.1 Requirements for trouble-free operation The following environmental factors may affect the range and functions of the contactless read procedure. Metal There must be no metal objects such as metal wall panelling within a square area measuring 120 x 120 mm and 30 mm deep. Adequate clearance must be ensured at the planning or installation stage. The reader range is reduced if the clearance distance cannot be complied with. 120mm 120mm 30mm Antenna field of another reader To prevent mutual interference, you must not install two readers closer to each other than the minimum specified distance. The minimum distance depends on local conditions, but it should always be greater than 50 cm. min. 50cm 2.2 Preparation Wall box A wall box (flush-mount or pattress box) is required to install S6-R Readers. The flush-mount or pattress box design must comply with DIN To ensure correct installation, the flush-mount box may only be fitted a maximum of 4 mm behind the wall surface or plasterwork and must be installed in a vertical position in the wall. The front edge may only vary a maximum of 1.5 mm from a straight line parallel with the wall surface. min. 50cm Cabling Connecting cables must feature a maximum cross-section of 1.5 mm². Data cables should consist of shielded twistedpair cabling with an impedance of 120 Ω. Detailed information regarding cable types and lengths and other specifications for the planning of access systems using our components are included in our DORMA EAC Hardware manual. DIN DORMA EAC Hardware manual DORMA EAC Hardware manual DORMA 9

10 2.3 Connection of S6-R Readers 10 mm S6-R-Reader System55, TX44, Siedle 611 S6-R-Reader Protect connection cable Push Terminal ST201 (System55) This push terminal is bus compatible. Cables are looped through the inside of the terminal. The bus is not interrupted when the terminal is removed from the S6-R Reader. Connection specifications Cable type Cable cross-section rigid / flexible 0,2-1,5mm² (AWG 24-16) Plug in rigid max. 2,5 mm mm 10 mm Flexible with wire end sleeve, no plastic sleeve Flexible with wire end sleeve, with plastic sleeve 0,5-1,5mm² 0,5mm² 2. Plug in flexible max. 2,5 mm mm max. 2,5 mm 2. optional mm Remove rigid and flexible max. 2,5 mm DORMA max. 2,5 mm 1.

11 2.4 Power supply The S6-R Reader s power supply is connected to Terminal 1 and Terminal 3 on the ST201, or to the brown and white wires in the connecting cable (S6-R Reader Protect). The voltage must be between 9 V and 40 VDC. S6-R-Reader System55 A+ B- 1 / 24V 3 / 0V ST201 The S6-R Reader must be connected in a de-energised state only. 2.5 RS485-Bus S6-R-Reader Protect The RS485 bus line is connected to Push Terminals ST201 Signals A+ and B-, or to the green and yellow wire in the connecting cable (S6-R Reader Protect). Signal 24V Wire colours brown A+ green B- yellow 0V white 2.6 S6-R Reader System55 final installation DORMA 11

12 2.7 TX44 final installation ø6mm DORMA

13 m 30mm S6-R READER ø6mm 2.8 Protect final installation Installation in flush-mount box S6-R Reader Protect Wall Flush-mount box Installation surface S6-R Reader Protect Montagefläche Installation directly on wall Spacer frame S6-R Reader Wall Protect Cable duct 1A 30mm 2A S6-R-Leser Protect Abstandsrahmen 30mm S6-R-Leser Protect Kabelkanal Wand Unterputzdose ø6mm Installation with cable duct Installation surface 1B 60mm S6-R Reader Protect Spacer frame ø3mm Cable duct ø3mm 2B 3B 60mm ø3mm Spacer frame for Protect Reader (Item no ) ø3mm Protectleser-Abstandsrahmen (Art.-Nr ) DORMA 13

14 Installation on metal plate 1C Metal 60mm S6-R Reader Protect ø3mm Spacer frame ø3mm 2C Use screws F when installing in a pattress box and with spacer frame 60mm ø3mm ø3mm 2.9 Front film for S6-R Reader Protect Once S6-R Reader Protect has been successfully put into operation, the front must be cleaned with a silicon remover and the self-adhesive film affixed to the exposed section. You must do this very carefully to ensure that protection rating IP65 is complied with. Caution: If you remove the self-adhesive film, it cannot be re-used. A new film must be affixed. You can order a replacement film from DORMA, by specifying item number third Spacer frame in your order. 14 DORMA

15 2.10 Siedle 611 final installation DORMA 15

16 3. Commissioning 3.1 Settings SW201 SW201 SW Function Bus adress Configuration protection Bus terminating resistor Bus Address The bus address can be set with the 8-pin DIP Switch SW addresses are available. The address 00 is reserved for thecontrol unit. SW Adress (decimal) off off off off off unzulässig on off off off off 01 off on off off off 02 on on off off off 03 off off on off off 04 on off on off off 05 off on on off off 06 on on on off off 07 off off off on off 08 on off off on off 09 off on off on off 10 SW Adress (decimal) on on off on off 11 off off on on off 12 on off on on off 13 off on on on off 14 on on on on off 15 off off off off on 16 on off off off on 17 off on off off on 18 on on off off on 19 off off on off on 20 on off on off on 21 SW Adress (decimal) off on on off on 22 on on on off on 23 off off off on on 24 on off off on on 25 off on off on on 26 on on off on on 27 off off on on on 28 on off on on on 29 off on on on on 30 on on on on on 31 Configuration protection DIP switch 6 of SW201 activates configuration protection. When configuration protection is activated, the configuration cannot be changed or deleted. SW201 6 Configuration protection off on off activ Bus terminating resistors The bus terminating resistors must be switched on if the S6R Reader is the first or last bus device. The configuration protection function is only available with firmware V3.30 or later. Switch 6 is set ex works, and its position should not be changed. An incorrect setting can make the S6R reader unusable! Configuration protection may only be deactivated if the "Load IdendAssembler" system parameter is activated in DORMA MATRIX. 16 DORMA

17 3.2 Signalling Audible signalling device Online-LED Read-LED Audible signalling device Online-LED Read-LED Online-LED Online LED Meaning Remark Off No power supply Flashing yellow Offline The S6-R reader is not being polled by a superordinate control unit Illuminate yellow Online The S6-R reader is being polled by a superordinate control unit Read-LED and audible signals Read-LED Buzzer Meaning Remark Off No booking activity Illuminated green Illuminated red Flashing yellow 1) Flashing yellow + Illuminated green 1) emits a signal for one second emits an intermittent signal for one second emits a short signal every second 1) Authorised booking Unauthorised booking and possibly unrecoverable AoC error AoC write operation Authorised booking despite AoC error Flashing yellow + Illuminated red 1) Temporary AoC error In the case of a temporary error, e.g. due to premature removal of an ID card, it makes sense to repeat the booking Attention: The signals described here are default values. The actual signalling may deviate as a result of modifications to the TP4 terminal configuration! 1) Only if the signalling is activated in the TP4 class konfiguration. DORMA 17

18 4. Service 4.1 Firmware Plug ST101 is used as an interface for any necessary firmware updates. Light barrier for tampering protection 4.2 S6-R Reader System55 tampering protection A light barrier providing tampering protection is integrated into the S6-R Reader System55. This barrier sends a signal to the higher level control unit if the cover is opened. 4.3 Antenna trimmer This device is optimally adjusted on site and should not be moved. ST101 Antenna trimmer Antenna trimmer ST DORMA

19 5. Technical Data Supply voltage 9 V to 40 VDC (SELV) Power consumption 1.2 W; 40 ma at 24 V max. 110 ma at 9 V Reader systems The following reader systems are available, depending on the model: MIFARE (Classic, DESFire) LEGIC (prime, advant) Transmission frequency: MHz HITAG Transmission frequency: 125 khz Read range: 2-5 cm The specified read distances are standard distances. They may vary, depending on the ID card type, installation frame and any surrounding metal parts. Anti-tamper contact System55/TX44: Reflected-light barrier Siedle 611: Button Interfaces 1 x RS485 (DP1) Display elements 1 x LED (online) 1 x LED (read) 1 x audible signal unit Operating temperature 20 C to +50 C Storage temperature 20 C to +70 C General design EN , protection class III Protection rating S6-R Reader System55: IP30 S6-R Reader Protect: IP65 S6-R Reader TX44: IP44 S6-R Reader Siedle 611: IP54 Resistance to interference EN , -3 EN Interference emissions EN EN , -3 Radio range EN Dimensions S6-R Reader System55: B71 x H71 x T24 S6-R Reader Protect: B81 x H81 x T20 S6-R Reader TX44: B71 x H71 x T24 S6-R Reader Siedle 611: B101 x H101 x T24 Weight S6-R Reader System55: 70g S6-R Reader Protect: 280g, including connecting cable S6-R Reader TX44: 70g S6-R Reader Siedle 611: 116g We reserve the right to make technical modifications and improvements that assist the further development of our equipment. DORMA 19

20 EC Declaration of Conformity 20 DORMA

21 DORMA 21

22 EC Declaration of Conformity 125 khz in preparation System55 TX44 Siedle DORMA

23 EC Declaration of Conformity 125 khz in preparation Protect DORMA 23

24 DORMA DEUTSCHLAND GmbH DORMA Platz ENNEPETAL DEUTSCHLAND Tel Fax DORMA TIME + ACCESS GMBH MAINZER STRASSE BONN DEUTSCHLAND TEL FAX Z.-Nr.: 1091G-00-B1-GB, 10/14 V2.0 Subject to change

O P E R A T I O N M A N U A L. RF-Reader. Stand-alone-Reader Leser 2plus with RS-232 interface

O P E R A T I O N M A N U A L. RF-Reader. Stand-alone-Reader Leser 2plus with RS-232 interface O P E R A T I O N M A N U A L Version 01/05 RF-Reader Stand-alone-Reader Leser 2plus with RS-232 interface Important! Read by all means! To maintain the perfect shipping conditions and to ensure safe operation

More information

Guide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area

Guide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area Guide for installers METTLER TOLEDO MultiRange System solution analog Ex1 Hazardous area Safe area System solution analog Ex1 Contents Contents Page 1 Safety precautions... 2 2 System overview... 3 2.1

More information

Peak Atlas IT. RJ45 Network Cable Analyser Model UTP05. Designed and manufactured with pride in the UK. User Guide

Peak Atlas IT. RJ45 Network Cable Analyser Model UTP05. Designed and manufactured with pride in the UK. User Guide GB05-7 Peak Atlas IT RJ45 Network Cable Analyser Model UTP05 Designed and manufactured with pride in the UK User Guide Peak Electronic Design Limited 2001/2013 In the interests of development, information

More information

(1) (2) (3) Bedienungs- und Montageanleitung. Safety instructions. Structure of the device

(1) (2) (3) Bedienungs- und Montageanleitung. Safety instructions. Structure of the device 3 x cinch/s-video socket Order no. 33 1532 xx USB/3.5 mm audio socket Order no. 33 1539 xx VGA socket Order no. 33 1540 xx VGA socket with screw-in lift terminals Order no. 33 1541 xx High definition socket

More information

Guide for installers. METTLER TOLEDO MultiRange System solution Point Ex.

Guide for installers. METTLER TOLEDO MultiRange System solution Point Ex. Guide for installers METTLER TOLEDO MultiRange System solution Point Ex www.mt.com/support System solution Point Ex Contents Contents Page 1 Safety precautions... 4 2 System overview... 5 2.1 Using the

More information

OPERATING MANUAL. DMX512 to DALI Dekoder 7044A-H Mk4

OPERATING MANUAL. DMX512 to DALI Dekoder 7044A-H Mk4 last edited: 2014-08-12 OPERATING MANUAL DMX512 to DALI Dekoder 7044A-H Mk4 (C) SOUNDLIGHT 1996-2015 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE REPRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT

More information

User Manual PS-684. HDBaseT Extender Kit 70m. All Rights Reserved. Version: UHBT70P_2016V1.2

User Manual PS-684. HDBaseT Extender Kit 70m. All Rights Reserved. Version: UHBT70P_2016V1.2 User Manual PS-684 All Rights Reserved Version: UHBT70P_2016V1.2 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model

More information

4, 8, 16 Port VGA/ Audio Extender / Splitter With Local Output with SPDIF Model #: VGA-C5SP-8

4, 8, 16 Port VGA/ Audio Extender / Splitter With Local Output with SPDIF Model #: VGA-C5SP-8 4, 8, 16 Port VGA/ Audio Extender / Splitter With Local Output with SPDIF Model #: VGA-C5SP-8 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview

More information

2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES

2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES EN K20RTD 2 WIRE - LOOP POWERED TRANSMITTER FOR PT00 AND NI00 PROBES General Description The K20RTD instrument converts a temperature signal read by a PT00 (EN 60 75) or NI00 probe with connection by 2,

More information

Safety Light Curtain C 4000

Safety Light Curtain C 4000 O P E R A T I N G I N S T R U C T I O N S Safety Light Curtain C 4000 Operating Instructions Chapter 2 On safety 2 On safety This chapter deals with your own safety and the safety of the equipment operators.!

More information

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01 Universal Flow Controller Model 261 / 261-EC-01 Instruction Manual Type ARS 261-EC 01 Art.-no: 82212264 Table of Contents 1. Safety Instructions 2. Product ID - Dimensions 3. Function Description 4. Installation

More information

Industriefunkuhren. Technical Manual. IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C / AFNOR NF S87-500

Industriefunkuhren. Technical Manual. IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C / AFNOR NF S87-500 Industriefunkuhren Technical Manual IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C37.118 / AFNOR NF S87-500 Module 7628 ENGLISH Version: 02.01-06.03.2013 2 / 20 7628 IRIG-B

More information

OPERATING MANUAL. DMX512 to DALI Dekoder 7044A-H Mk1

OPERATING MANUAL. DMX512 to DALI Dekoder 7044A-H Mk1 last edited: 2010-07-24 OPERATING MANUAL DMX512 to DALI Dekoder 7044A-H Mk1 (C) SOUNDLIGHT 1996-2010 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE REPRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT

More information

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ AV Connectivity, Distribution And Beyond... VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control

More information

User Manual TP70L. HDBaseT Extender. All Rights Reserved. Version: TP70L2016V1.1

User Manual TP70L. HDBaseT Extender. All Rights Reserved. Version: TP70L2016V1.1 User Manual TP70L HDBaseT Extender All Rights Reserved Version: TP70L2016V1.1 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different

More information

USER GUIDE. AXIS T8640 Ethernet Over Coax Adaptor PoE+ ENGLISH

USER GUIDE. AXIS T8640 Ethernet Over Coax Adaptor PoE+ ENGLISH USER GUIDE AXIS T8640 Ethernet Over Coax Adaptor PoE+ ENGLISH Electromagnetic Compatibility (EMC) This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

More information

EC5415B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 15-channel, bidirectional

EC5415B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 15-channel, bidirectional B-Tronic EasyControl EC5415B en Assembly and Operating Instructions Wall/hand-held transmitter, 15-channel, bidirectional Important information for: Fitters / Electricians / Users Please forward accordingly!

More information

OPERATING MANUAL. DMX Demultiplexer 3012B Mk2

OPERATING MANUAL. DMX Demultiplexer 3012B Mk2 last updated: 2007-03-08 OPERATING MANUAL DMX Demultiplexer 3012B Mk2 (C) SOUNDLIGHT 1995-2007 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE REPRODUCED, DUPLICATED OR USED COMMERCIALLY WITHOUT

More information

1x4, 1x8, 1x12, 1x16 VGA Extender / Splitter over Single CAT5

1x4, 1x8, 1x12, 1x16 VGA Extender / Splitter over Single CAT5 1x4, 1x8, 1x12, 1x16 VGA Extender / Splitter over Single CAT5 User s Guide Models VGA-C5-SP-4 VGA-C5-SP-8 VGA-C5-SP-12 VGA-C5-SP-16 2009 Avenview Inc. All rights reserved. The contents of this document

More information

EXT-HBT70-SET_2016V1.2

EXT-HBT70-SET_2016V1.2 USER MANUAL EXT-HBT70-SET HDBaseT Extender Set 70m All Rights Reserved Version: EXT-HBT70-SET_2016V1.2 Preface Read this user manual carefully before using this product. Pictures shown in this manual is

More information

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ Model #: VGA-C5A-SET 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc.

More information

STC 160 Head-End Station Quad modulators

STC 160 Head-End Station Quad modulators STC 160 Head-End Station Quad modulators HMS 480 HMM 480 / HMM 480 OIRT Notes on the Assembly Instructions. As well as this supplementary Assembly Instructions, the Assembly Instructions for the STC 160

More information

OM2000N INSTALLATION MANUAL

OM2000N INSTALLATION MANUAL OM2000N INSTALLATION MANUAL 2 1 Figure A 1 2 Laser Beam Output Window Power Cable 821001342 (Rev. B) DESCRIPTION The OM2000N oscillating mirror is an accessory for the 2000N family laser scanners: DS2100N,

More information

Z-D-IN. RS485 Modbus Module 5 Digital Inputs

Z-D-IN. RS485 Modbus Module 5 Digital Inputs S SENECA Z-PC Line EN Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - Modbus connection rules - DIP-switches Settings -

More information

4, 8, 16 Port VGA and Audio Extender / Splitter with Audio over Single CAT5

4, 8, 16 Port VGA and Audio Extender / Splitter with Audio over Single CAT5 4, 8, 16 Port VGA and Audio Extender / Splitter with Audio over Single CAT5 Model #: VGA-C5SP-4, VGA-C5SP-8, VGA-C5SP-16 2010 Avenview Inc. All rights reserved. The contents of this document are provided

More information

User Manual TPHD-BYE. HDBaseT Extender Set 70m. All Rights Reserved. Version: TPHD-BYE_2014V1.0

User Manual TPHD-BYE. HDBaseT Extender Set 70m. All Rights Reserved.  Version: TPHD-BYE_2014V1.0 User Manual TPHD-BYE HDBaseT Extender Set 70m All Rights Reserved Version: TPHD-BYE_2014V1.0 www.ptn-electronics.com Preface Read this user manual carefully before using this product. Pictures shown in

More information

PT-C-HDADE. User Manual. HDMI Audio De-Embedder 4K (60Hz 4:4:4) Model PT-C-HDADE. Designed in Germany

PT-C-HDADE. User Manual. HDMI Audio De-Embedder 4K (60Hz 4:4:4) Model PT-C-HDADE. Designed in Germany HDMI Audio De-Embedder 4K (60Hz 4:4:4) Model Designed in Germany 2017 PureLink GmbH All rights reserved. VersionV1.0 Preface Read this user manual carefully before using this product. Pictures shown in

More information

For installation queries contact Customer Services (0) TCR IP 4 Operating instructions

For installation queries contact Customer Services (0) TCR IP 4 Operating instructions For installation queries contact Customer Services +49 - (0)3 69 25-9 00 90 kundenservice@rutenbeck.de TCR IP 4 Operating instructions GB Device overview External buttons (for manual switching) Temperature

More information

Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16)

Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16) Satellite multiswitch Instructions for Use P.154-UP (9/4) P.155-UP (9/8) P.150-UP-12 (9/12) P.150-UP-16 (9/16) EMP-CENTAURI is a registered trademark Dear Customer, Thank you for buying the EMP-Centauri

More information

Power Injector 1520 Series

Power Injector 1520 Series Power Injector 1520 Series Technical Specifications Input voltage 100 to 240 VAC Output voltage 56.0 VDC Voltage range tolerance 54 VDC to 57 VDC Maximum current 1.43 A No load current 15 ma 56VDC@0.71A

More information

8 Port HD/SD-SDI Video Switch with 2 Port Splitter

8 Port HD/SD-SDI Video Switch with 2 Port Splitter 8 Port HD/SD-SDI Video Switch with 2 Port Splitter User s Guide Models SW-HDSDI-8X2 2008 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (

More information

Owner s Manual. multiswitch Firmware-Version 1.06 OS- Version 1.02

Owner s Manual. multiswitch Firmware-Version 1.06 OS- Version 1.02 Owner s Manual multiswitch 1.41 Firmware-Version 1.06 OS- Version 1.02 The information contained in this manual is subject to change without prior notice. All rights reserved. Current as of: Juli 19 th

More information

SC-C1M SiriusConnect TM Vehicle Tuner

SC-C1M SiriusConnect TM Vehicle Tuner SC-C1M SiriusConnect TM Vehicle Tuner For Special Market Applications Installation Guide Congratulations on the Purchase of your new SIRIUS SC-C1 SiriusConnect TM Vehicle Tuner. The SC-C1M is packaged

More information

Trusted 40 Channel Analogue Input FTA

Trusted 40 Channel Analogue Input FTA PD-T8830 Trusted Trusted 40 Channel Analogue Input FTA Product Overview The Trusted 40 Channel Analogue Input Field Termination Assembly (FTA) T8830 is designed to act as the main interface between a field

More information

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range Installation Manual Table of Contents Basic Operation...2 CR-R880-BL Block Diagram...2 Technical Specifications...3 Features...4

More information

3G/HD/SD-SDI to HDMI Converter

3G/HD/SD-SDI to HDMI Converter 3G/HD/SD-SDI to HDMI Converter Model #: 3G/HD/SD-SDI to HDMI Converter 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products.

More information

VGA, Audio & RS232 Extender SET over Single CAT5 with RGB Delay Control & IR Pass Through

VGA, Audio & RS232 Extender SET over Single CAT5 with RGB Delay Control & IR Pass Through VGA, Audio & RS232 Extender SET over Single CAT5 with RGB Delay Control & IR Pass Through Model #: VGA-C5ARS-SET 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection

More information

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this

More information

Single cable multiswich programmer PC102W

Single cable multiswich programmer PC102W Single cable multiswich programmer PC102W 1. Product description The PC102W - single cable multiswich programmer (in the text - programmer) is useful instrument while configuring and troubleshooting SAT

More information

SAFETY WARNINGS AND GUIDELINES INTRODUCTION CUSTOMER SERVICE

SAFETY WARNINGS AND GUIDELINES INTRODUCTION CUSTOMER SERVICE SAFETY WARNINGS AND GUIDELINES Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred. Before plugging the unit into a power outlet, ensure that

More information

Operating Manual. Basic Control BC16. two-channel for eco moon

Operating Manual. Basic Control BC16. two-channel for eco moon Operating Manual Basic Control BC16 two-channel for eco moon Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that

More information

HDBaseT Extender Set 100m User Guide

HDBaseT Extender Set 100m User Guide HDBaseT Extender Set 100m User Guide Model CM-BT10-TXRX100 Last modified: 09/29/16 Doc ID - 620 Rev 04 Copyright Trademarks and patents Manufacturer Contact information 29SEP16 Clare Controls, LLC. All

More information

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at ACT 10 Digital Keypad Operating & Installation Instructions 18-00001 This manual is found at www.eaglesecuritysolutions.co.uk Installation Notes Always remember to factory default the controller before

More information

VGA & Audio Receiver SET over Single CAT5 with RGB Delay Control

VGA & Audio Receiver SET over Single CAT5 with RGB Delay Control VGA & Audio Receiver SET over Single CAT5 with RGB Delay Control Model #: VGA-C5A-R 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (

More information

Operating instructions

Operating instructions 108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.

More information

CHECK LINE. Model LS-36-LED. Stationary Stroboscope. Operating Manual BY ELECTROMATIC

CHECK LINE. Model LS-36-LED. Stationary Stroboscope. Operating Manual BY ELECTROMATIC CHECK LINE BY ELECTROMATIC Stationary Stroboscope Model LS-36-LED Operating Manual Table of Contents 1.0 Introduction... 02 1.1 Unpacking 1.2 Optional Accessories 2.0 Safety Information... 3 3.0 Controls...

More information

Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module

Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

ER-100 Eurorack 8 Channel Stereo, Transformer Balanced Out Summing Mixer User Manual

ER-100 Eurorack 8 Channel Stereo, Transformer Balanced Out Summing Mixer User Manual ER-100 Eurorack 8 Channel Stereo, Transformer Balanced Out Summing Mixer User Manual Issue 0.1 SAFETY INSTRUCTIONS WARNING Always follow the precautions listed below to avoid any possibility of serious

More information

Touch Panel Display Module

Touch Panel Display Module Touch Panel Display Module Introduction The E-Plex 367TPD series has a resistive touch panel, with s for status indication and a 4-digit, 7-segment numerical display allowing valuable information to be

More information

4 Wiring Brochure Wiring and installation of specific control

4 Wiring Brochure Wiring and installation of specific control - Wiring Brochure tekmarnet 4 User Switch 480 W 480 09/09 1 Information Brochure Choose controls to match application 2 Application Brochure Design your mechanical applications 3 Rough In Wiring Rough-in

More information

DCF Module FAZ 3000 DCF

DCF Module FAZ 3000 DCF DCF Module FAZ 3000 DCF Operating instructions Order No.: 47014 Please read these instructions fully and completely before initial commissioning; they contain information for the correct use of this module.

More information

User Manual TL-TP70-HDIR 70m Extender with ARC and IR All Rights Reserved Version: TL-TP70-HDIR_180723

User Manual TL-TP70-HDIR 70m Extender with ARC and IR All Rights Reserved Version: TL-TP70-HDIR_180723 User Manual TL-TP70-HDIR 70m Extender with ARC and IR All Rights Reserved Version: TL-TP70-HDIR_180723 Preface Read this user manual carefully before using this product. Pictures shown in this manual is

More information

Achat 115 Sub A active subwoofer. user manual

Achat 115 Sub A active subwoofer. user manual Achat 115 Sub A active subwoofer user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Deutschland Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de

More information

VGA & RS232 Extender SET over Single CAT5 with RGB Delay Control

VGA & RS232 Extender SET over Single CAT5 with RGB Delay Control VGA & RS232 Extender SET over Single CAT5 with RGB Delay Control Model #: VGA-C5RS-SET 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc.

More information

Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-CP-12 (13/12) P.160-CP-16 (13/16)

Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-CP-12 (13/12) P.160-CP-16 (13/16) Satellite multiswitch Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-AP-12 (13/12) P.160-CP-12 (13/12) P.160-AP-16 (13/16) P.160-CP-16 (13/16) EMP-CENTAURI is a registered trademark Dear

More information

SINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS

SINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS SINAMICS G130 Operating Instructions 03/2013 SINAMICS s dv/dt filter plus Voltage Peak Limiter Safety information 1 General 2 SINAMICS SINAMICS G130 Operating Instructions Mechanical installation 3 Electrical

More information

SAT IF distribution system

SAT IF distribution system 7. Technical specifications Type cs43 RF input frequency range pr. 50-350 MHz inputs number 4 level pr. 55...88 dbµv 60...93 dbµv symbol rate 3 45 Ms/s return loss/impedance > 0 db/75 Ω LNB powering/control

More information

USER MANUAL. WARNING Read the instructions before using the machine. EN (Original Instruction) / 1704

USER MANUAL. WARNING Read the instructions before using the machine. EN (Original Instruction) / 1704 USER MANUAL European Models American Models 60/100/120 3/4/5 24/40/48 3/4/5 Read the instructions before using the machine. EN (Original Instruction) 9124097 / 1704 KEEP THIS USER MANUAL FOR FUTURE USE

More information

User Manual TP70P. HDBaseT Extender Set 70m. All Rights Reserved. Version: TP70P_2016V1.0

User Manual TP70P. HDBaseT Extender Set 70m. All Rights Reserved. Version: TP70P_2016V1.0 User Manual TP70P HDBaseT Extender Set 70m All Rights Reserved Version: TP70P_2016V1.0 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference

More information

USER AND INSTALLATION MANUAL ENGLISH SWITCHPACK. PART01245 CONTROL GEAR. rev 01-00

USER AND INSTALLATION MANUAL ENGLISH SWITCHPACK. PART01245 CONTROL GEAR. rev 01-00 USER AND INSTALLATION MANUAL ENGLISH F SWITCHPACK. CONTROL GEAR PART01245 rev 01-00 DISCLAIMER WARNING Read this manual carefully before installing and/or using this product. Failure to read the manual

More information

User Guide. Centrex Recording Interface

User Guide. Centrex Recording Interface User Guide Centrex Recording Interface Table of Contents Introduction... 2 The Meridian Business Set... 3 Key Numbering Plan (18 button add-on)... 4 Key Numbering Plan (36 button add-on)... 5 Key Numbering

More information

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650 M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de

More information

VGA to DVI Extender over Fiber SET

VGA to DVI Extender over Fiber SET VGA to DVI Extender over Fiber SET Model #: FO-VGA-DVI 2011 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview

More information

Broadcast A/V Division VAC-HT12-KIT. 4K/UHD/HD/SD HDBaseT Extender Kit Video, Power, and Control over one CAT cable. User Manual

Broadcast A/V Division VAC-HT12-KIT. 4K/UHD/HD/SD HDBaseT Extender Kit Video, Power, and Control over one CAT cable. User Manual Broadcast A/V Division VAC-HT12-KIT 4K/UHD/HD/SD HDBaseT Extender Kit Video, Power, and Control over one CAT cable User Manual Table of Contents Introduction... 3 Features... 3 Package Contents... 3 Specifications...

More information

M150SP USER S AND INSTALLER S MANUAL. v2.0 REV. 03/2017

M150SP USER S AND INSTALLER S MANUAL. v2.0 REV. 03/2017 M150SP USER S AND INSTALLER S MANUAL v2.0 REV. 03/2017 00. CONTT 01. SAFETY INSTRUCTIONS INDEX 01. SAFETY INSTRUCTIONS STANDARDS TO FOLLOW 02. THE DEVICE TECHNICAL SPECIFICATIONS VISUAL ASPECT CONNECTORS

More information

E3/DS3 Fibre Extender

E3/DS3 Fibre Extender User Manual E3/DS3 Fibre Extender Black Box Network Services 464 Basingstoke Road, Reading, Berkshire, RG2 0BG Tech: 0118 965 6000 www.blackbox.co.uk CONTENTS 1 Introduction 1 1.1 About the products 1

More information

User Manual. AtlonA. Passive VGA Extender with Wall Plate or Box options up to 330ft over 1 x CAT5/6/7 Cable AT-VGA100-SR and AT-WPVGA-SR AT-WPVGA-SR

User Manual. AtlonA. Passive VGA Extender with Wall Plate or Box options up to 330ft over 1 x CAT5/6/7 Cable AT-VGA100-SR and AT-WPVGA-SR AT-WPVGA-SR User Manual AtlonA Passive VGA Extender with Wall Plate or Box options up to 330ft over 1 x CAT5/6/7 Cable AT-VGA100-SR and AT-WPVGA-SR AT-WPVGA-SR Receiver Transmitter AT-VGA100-SR Receiver Transmitter

More information

User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W

User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W User Manual Entry Line Industrial Fast Ethernet Switch 4x 10/100Base-TX, 1x 100Base-X Fiber Port 4x PoE+ up to 30W Entry Line Fast Ethernet Switch Fast Ethernet Switch with PoE+ for Industrial Use Page

More information

414 P 1. DESCRIPTION AND TECHNICAL SPECIFICATIONS 2. LAY-OUT OF STANDARD SYSTEM INSTALLATION DIMENSIONS. Fig. 1. Fig. A

414 P 1. DESCRIPTION AND TECHNICAL SPECIFICATIONS 2. LAY-OUT OF STANDARD SYSTEM INSTALLATION DIMENSIONS. Fig. 1. Fig. A 1 414 P The 414 P automated system for swing leaf gates is an electromechanical operator which transmits motion to the leaf by a worm-screw system. It is a self-locking automatic system equipped with a

More information

Contactless encoder Ri360P0-QR24M0-HESG25X3-H1181

Contactless encoder Ri360P0-QR24M0-HESG25X3-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Positioning element and aluminium ring not incl. SSI output 25 bit, Gray-coded SSI clock rate: 62.5 KHz 1 MHz Single or multiturn,

More information

A new generation of access control.

A new generation of access control. TM A new generation of access control. 2 or 4 Door Expandable Controller INSTALLATION MANUAL Installation overview: Installation Diagram Switch Alpha 4 Alpha 4 + PoE Alpha 4 + PoE Alarm central Accessory

More information

DisplayPort to VGA Converter

DisplayPort to VGA Converter DisplayPort to VGA Converter Model #: C-DP-VGA 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview makes

More information

Product information. Front-door station series with video for surface-mount

Product information. Front-door station series with video for surface-mount Product information Front-door station series with video for surface-mount series VPES series VPDS 2 05/2006 Table of contents Scope of delivery...3 Safety notices...3 General notes on the cabling in TCS

More information

Operating instructions V 514 / X-QAM quad

Operating instructions V 514 / X-QAM quad Operating instructions V 514 / X-QAM quad DVB-S2 / QAM Quad Transmodulator with Service-Filter Pictograms and safety instructions Pictograms are visual symbols with specific meanings. You will encounter

More information

BT Diverse Repeater. User Guide

BT Diverse Repeater. User Guide BT Diverse Repeater User Guide Section Welcome to your BT Diverse Repeater Range Extender Extends the range in which you can make and receive calls from your existing DECT base station by up to 50m indoors

More information

Gamma instabus. Technical product information

Gamma instabus. Technical product information Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output

More information

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor Industrial Pressure Transmitter with i²c interface Stainless Steel Sensor Accuracy according to IEC 60770: standard: ± 0. % FSO option: ± 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Digital

More information

VLHDMIEXTFIB_2017V1.0

VLHDMIEXTFIB_2017V1.0 User Manual VLHDMIEXTFI ll Rights Reserved Version: VLHDMIEXTFI_2017V1.0 Preface Read this user manual carefully before using the product. Pictures are shown in this manual for reference only, different

More information

User Manual POE. Twisted Pair POE Extender

User Manual POE. Twisted Pair POE Extender User Manual 77451-POE Twisted Pair POE Extender SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

More information

3 Cleaning. 4 Technical data

3 Cleaning. 4 Technical data EXC+ EXC- Sig- SIG+ SEN- SEN+ 2.4 Attaching cable to the analog board Attaching cable of the weighing cell to the system solution Connect the cable to the appropriate terminal strip of the Ex1 system solution

More information

Assembly. Front view. LEDs. Parametrization interface. Power Bus

Assembly. Front view. LEDs. Parametrization interface. Power Bus otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit

More information

LTC 113x & LTC123x FlexiDome Series Fixed Dome Cameras

LTC 113x & LTC123x FlexiDome Series Fixed Dome Cameras LTC 113x & LTC123x FlexiDome Series Fixed Dome Cameras Eng Installation Instructions F D E NL I IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before

More information

Trusted 40 Channel 120 Vac Digital Input FTA

Trusted 40 Channel 120 Vac Digital Input FTA PD-T8824 Trusted Trusted 40 Channel 120 Vac Digital Input FTA Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface

More information

Smart Control SC16 3-Channel for matrix

Smart Control SC16 3-Channel for matrix Operating Manual Smart Control SC16 3-Channel for matrix Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that was

More information

FlexiScan. Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL

FlexiScan. Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL MODEL NUMBER: HCM991-0-0-GB-XX FlexiScan SPECIFICATIONS Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL Working Environment... Security... Input Voltage... The Impro FlexiScan is designed to work

More information

Registers type ILR7XX and ILR7XXT

Registers type ILR7XX and ILR7XXT Badger Meter Europa GmbH Registers type ILR7XX and ILR7XXT INSTALLATION AND OPERATION MANUAL May 2018 Contents Page 1. Basic safety recommendations... 1 2. Register operation... 3 2.1. Normal operation...

More information

AVS50 USER GUIDE. 2.4GHz Audio/Video Sender System - AVS50

AVS50 USER GUIDE. 2.4GHz Audio/Video Sender System - AVS50 2.4GHz Audio / Video Sender System AVS50 USER GUIDE 2.4GHz Audio/Video Sender System CONTENTS 1. Introduction... 2 2. Conformity of Use... 3 3. Controls and Connections... 4-5 4. Product Contents... 6

More information

User Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.

User Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5. EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended

More information

Your Global Automation Partner. Ultrasonic Sensors. Operating Instructions

Your Global Automation Partner. Ultrasonic Sensors. Operating Instructions Your Global Automation Partner RU CK40 RU CP40 Ultrasonic Sensors Operating Instructions Contents 2 Hans Turck GmbH & Co. KG T +49 208 4952-0 F +49 208 4952-264 more@turck.com www.turck.com Contents 1

More information

User Manual TP422P-4K. Ultra-thin HDBaseT Extender. All Rights Reserved. Version: TP422P-4K_2016V1.1

User Manual TP422P-4K. Ultra-thin HDBaseT Extender. All Rights Reserved. Version: TP422P-4K_2016V1.1 User Manual TP422P-4K All Rights Reserved Version: TP422P-4K_2016V1.1 Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model

More information

Installation Guide VL-MV10. Model No.

Installation Guide VL-MV10. Model No. Installation Guide Model Name Model No. Main Monitor Station VL-MV0 R Main monitor station is described as "main monitor" in this guide. R In this guide, the suffix of each model number (e.g., the "EX"

More information

HDMI 1.3 Receiver over Signal. CAT5/CAT6 Cable. Model #: HDMI-C5-R-M. 1

HDMI 1.3 Receiver over Signal. CAT5/CAT6 Cable. Model #: HDMI-C5-R-M.  1 HDMI 1.3 Receiver over Signal CAT5/CAT6 Cable Model #: HDMI-C5-R-M 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products.

More information

SQM40/41 Actuators for air and gas dampers

SQM40/41 Actuators for air and gas dampers SQM40/41 Actuators for air and gas dampers Description SQM40/41 actuators are used for the positioning of flow control valves, butterfly valves, dampers or any application requiring rotary motion. The

More information

OPERATING MANUAL. DMX / Constant Current Dekoder 3706A-H Mk1 RDM

OPERATING MANUAL. DMX / Constant Current Dekoder 3706A-H Mk1 RDM last updated: 14-03-31 OPERATING MANUAL DMX / Constant Current Dekoder 3706A-H Mk1 RDM (C) SOUNDLIGHT 1996-2014 * ALL RIGHTS RESERVED * NO PART OF THIS MANUAL MAY BE REPRODUCED, DUPLICATED OR USED COMMERCIALLY

More information

ATTACHING & REMOVING THE BASE

ATTACHING & REMOVING THE BASE TV53DB ATTACHING & REMOVING THE BASE 1. To install or remove the neck, screw in or remove the 4 screws indicated in the picture. 2. To install the base, place the display unit flat on a table. Afterwards

More information

INSTRUCTION MANUAL MODEL 2710 SUBCARRIER DEMODULATOR

INSTRUCTION MANUAL MODEL 2710 SUBCARRIER DEMODULATOR INSTRUCTION MANUAL MODEL 2710 SUBCARRIER DEMODULATOR Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., and may not be reproduced or duplicated in any form

More information

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control

More information

ImproX SupaGate 4-Channel Controller INSTALLATION MANUAL

ImproX SupaGate 4-Channel Controller INSTALLATION MANUAL MODEL NUMBER: SGI911-1-1-GB-XX IMPROX SUPAGATE SPECIFICATIONS ImproX SupaGate 4-Channel Controller INSTALLATION MANUAL Working Environment... Passive Frequency... RF Frequency... Security... Input Voltage...

More information

9I273 01/10/2012 COU-03/0 AUTOMATIC CHANGEOVER UNIT TO BACK-UP AMPLIFIER

9I273 01/10/2012 COU-03/0 AUTOMATIC CHANGEOVER UNIT TO BACK-UP AMPLIFIER 9I273 01/10/2012 COU-03/0 1 CONTENTS 1. SPECIFICATIONS... 3 2. BLOCKS DIAGRAM... 3 3. FRONT VIEW... 4 4. REAR VIEW... 4 5. CONTROL MODULE... 4 6. ZONE CARD (COU-03FC or COU-03EC)... 6 6.1. Diagram... 6

More information