Table of contents. Operating Instructions AV Control Receiver. Model No. SA-XR55

Transcription

1 Operating Instructions AV Control eceiver Model No. SA-X55 Table of contents Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Before use Caution for AC Mains ead Safety precautions How to set up the Home Theater Supplied accessories Note: EB on the packaging indicates the United Kingdom. Connections Home Theater connections 1. TV and DVD player Basic connection High picture quality connection DVD ANAOG 6CH connection Speakers Bi-wiring connection Using speaker terminal B AC mains lead Other connections DVD recorder VC Cable box or satellite receiver etc CD player Tape deck Game player etc.. 10 Antennas The remote control Settings eceiver settings - Basic Settings - Test Basic Operations Basic operations Playback Using Surround effects Operations Control guide Sound quality/sound field/convenient functions Making a recording eceiver settings - Advanced The radio DS broadcasts emote control mode Multi control menus and factory settings eference Specifications Maintenance Troubleshooting guide back cover E EB GN QT7997-1B

2 ENGISH Before use QT7997 Caution for AC Mains ead (For United Kingdom) ( EB area code model only) For your safety, please read the following text carefully. This appliance is is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is is fitted in in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of of 5-ampere and that it it is is approved by ASTA or BSI to to BS16. Check for the ASTA mark or or the BSI mark on the body of of the fuse. If If the plug contains a removable fuse cover you must ensure that it it is is refitted when the fuse is is replaced. If If you lose the fuse cover the plug must not be used until a replacement cover is is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOUDED PUG IS UNSUITABE FO THE SOCKET ET YOU HOME THEN THE FUSE SHOUD BE EMOVED AND THE PUG CUT OFF AND DISPOSED OF SAFEY. THEE IS A DANGE OF SEVEE EECTICA SHOCK IF THE CUT OFF PUG IS SETED TO ANY 1-AMPEE SOCKET. If If a new plug is is to to be fitted please observe the wiring code as stated below. If If in in any doubt please consult a qualified electrician. IMPOTANT The wires in in this mains lead are coloured in in accordance with the following code: Blue: Neutral, Brown: ive. As these colours may not correspond with the coloured markings identifying the terminals in in your plug, proceed as follows: The wire which is is coloured Blue must be connected to to the terminal which is is marked with the letter N or coloured Black or Blue. The wire which is is coloured Brown must be connected to the terminal which is is marked with the letter or coloured Brown or ed. WANG: DO NOT CONNECT EITHE WIE TO THE EATH TEMA WHICH IS MAKED WITH THE ETTE E, BY THE EATH SYMBO O COOUED GEEN O GEEN/YEOW. THIS PUG IS NOT WATEPOOF KEEP DY. Before use emove the connector cover. How to replace the fuse The location of of the fuse differ according to to the type of of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug Open the fuse cover with a screwdriver. Figure A Figure B Fuse cover.. eplace the fuse and close or attach the fuse cover. Figure A Figure B Fuse Fuse (5 ampere) (5 ampere) Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit s service life. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these operating instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time. CAUTION! Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place tape decks or CD/DVD players on this unit as heat radiated from it can damage your software. nsales and Support Information (For the United Kingdom and epublic of Ireland) Customer Care Centre For UK customers: For epublic of Ireland customers: Visit our website for product information customer.care@panasonic.co.uk Direct Sales at Panasonic UK Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday-Friday 9:00am-5:0pm. (Excluding public holidays) Or go on line through our Internet Accessory ordering application at Most major credit and debit cards accepted. All enquiries transactions and distribution facilities are provided directly by Panasonic UK td. It couldn t be simpler! Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

3 How to set up the Home Theater 7.1/6.1-channel surround Connections TV, DVD player, etc. + Speakers Front speakers 1 Center speaker Surround speakers Surround back speakers (1 Surround back speaker) 1 Subwoofer Settings These settings are necessary to output the audio correctly. Speakers combination settings + Surround back speaker settings Operations Output 5.1-channel sound in 7.1/6.1-channel Output a stereo source in 7.1/6.1-channel Dolby Pro ogic DTS NEO:6 SFC Stereo playback Before use ENGISH 5.1-channel surround TV, DVD player, etc. + Speakers Front speakers 1 Center speaker Surround speakers 1 Subwoofer You can create your desired environment by connecting other peripheral equipment. Speakers combination settings isten to your television or CDs in surround sound Output a stereo source in 5.1-channel Dolby Pro ogic DTS NEO:6 SFC Stereo playback Turn on. or or Select Dolby Pro ogic, DTS NEO:6 or SFC to listen to stereo sound from your television or CDs in surround. (Sound is output from all the speakers.) Depending on the speaker settings and input signal (audio signal from the disc being played), this may not be possible. (ápage 17) Supplied accessories Please check and identify the supplied accessories. 1 AC mains lead For the United Kingdom (JA005-X) For Australia and New Zealand (KCJDA00010) For continental Europe (KCQCA0000) 1 FM indoor antenna (SA0007-) 1 AM loop antenna (SA007) 1 Antenna plug adapter For the United Kingdom (K1YZ000001) For Australia and New Zealand (KC01B000) Batteries 1 emote control (EU77KN0) efer to the separate booklet, emote Control Operation Guide, for remote control operation details. Use the numbers indicated in parentheses when asking for replacement parts. (As of April 005) QT7997

4 ENGISH Connections Home Theater connections - 1. TV and DVD player Basic connection Preparation: Turn off all components before making any connections. Connection cable (All cables are sold separately) Audio cable Video cable Scart cable Stereo phono cable White () ed () Coaxial cable Optical fiber cable You can enjoy analogue sound. You can enjoy digital sound such as Dolby Digital, DTS and PCM. Do not sharply bend the optical fiber cable. Video connection cable Use to connect to the TV MONITO terminals for a standard picture. Use an analogue connection to enjoy sources that cannot be decoded on this unit and to record analogue sources. TV or monitor DIGITA AUDIO 1-pin scart cable Use when connecting equipment with a 1-pin scart terminal. AUDIO This unit OOP EXT Y PB P Y PB P Y PB P Y PB P Changing the digital input settings You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the settings. (ápage 1) FM ANT AM ANT TV MONITO DVD DVD ECODE COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE TV/ST DIGITA S CENTE SUBWOOFE CD EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIOAUDIO DVD ECODE VC1 : Signal flow DVD player DIGITA AUDIO AUDIO nconnection with 1-pin scart cable (For continental Europe and the United Kingdom) OOP EXT Y PB P Y PB P Y PB P Y TV or monitor AV DIGITA AUDIO FM ANT AM ANT TV MONITO DVD DVD ECODE COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DIGITA S VID CENTE AV QT7997 SUBWOOFE CD EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIOAUDIO DVD ECODE VC1 DIGITA AUDIO DVD player

5 Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. High picture quality connection Use this connection instead of the / connections on page. A COMPONENT connection provides a purer picture than a S- connection. Select a S- or COMPONENT connection to match the peripheral equipment. Video input can only be output again through the same type of terminal. Preparation: Turn off all components before making any connections. Connection cable (All cables are sold separately) Audio cable Stereo phono cable White () ed () Coaxial cable Optical fiber cable You can enjoy analogue sound. You can enjoy digital sound such as Dolby Digital, DTS and PCM. Do not sharply bend the optical fiber cable. Video connection cable S- connection cable Video cable Use to connect to the TV MONITO terminals for a standard picture. Can also be used to make a COMPONENT connection for a higher quality picture than an S- connection. You can enjoy a higher quality picture than with a video connection cable. Connections ENGISH TV or monitor DIGITA AUDIO COMPONENT Y PB P S- AUDIO You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the settings. (ápage 1) OOP EXT Y PB P Y PB P Y PB P Y PB P FM ANT AM ANT TV MONITO DVD COMPONENT DVD ECODE () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE DIGITA S CENTE SUBWOOFE CD EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIO AUDIO DVD ECODE VC1 This unit : Signal flow DVD player DIGITA AUDIO DVD ANAOG 6CH connection AUDIO Y PB P COMPONENT S- You can play high fidelity sound such as DVD-Audio. You need to make additional connections for this. áefer to page 1 for Playing DVD-Audio. COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 DIGITA CENTE EC() PAY() SUBWOOFE CD TAPE SUBWOOFE SUOUND FONT DVD/DVD 6CH DVD ECODE VC1 AUDIO AUDIO T T FONT SUOUND CENTE SUBWOOFE DVD player QT7997 5

6 Home Theater connections -. Speakers QT7997 ENGISH Connections Front speakers (: left/: right) Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound. Center speaker Place underneath or above the center of the TV. Aim the speaker at the seating area. Surround speakers (S: left/s: right) Place on the side of or slightly behind the seating area, about one meter higher than ear level. ( ) Surround back speakers (SB: left/sb: right) Place behind the seating area, about one meter higher than ear level. SB/SB: Two surround back speakers. SB: One surround back speaker. Subwoofer The subwoofer can be placed in any position as long as it is at a reasonable distance from the TV. The front, center, surround and surround back speakers should be placed at approximately the same distance from the seating position. The angles in the diagram are approximate. Set the distance of the speakers from the seating position if you cannot place them at the same distances. (ápage 1) Speaker settings and placement should suit the number of speakers. (ápage 1) nplacement of speakers The number of speakers Speakers Placement 7 Front speakers (eft/ight), 1 Center speaker, Surround speakers (eft/ight), Surround back speakers (eft/ight) 6 Front speakers (eft/ight), 1 Center speaker, Surround speakers (eft/ight), 1 Surround back speaker Front speakers (eft/ight), Surround speakers (eft/ight), Surround back speakers (eft/ight) 5 Front speakers (eft/ight), Surround speakers (eft/ight), 1 Surround back speaker Front speakers (eft/ight), 1 Center speaker, Surround speakers (eft/ight) Front speakers (eft/ight), Surround speakers (eft/ight) Front speakers (eft/ight), 1 Center speaker Front speakers (eft/ight) 6

7 Preparation: Turn off all components before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. Speaker cable (All cables are sold separately) Speaker cable Monaural connection cable Twist the wire Speaker terminals Do not short-circuit Connect the cables so,, + and - are correct. Connections ENGISH Speaker impedance: Front A: 6-16 Ω Center: 6-16 Ω Surround: 6-16 Ω Surround back: 6-16 Ω Front speakers Center speaker OOP EXT PB P FONT A F BI-WIE FONT B HF CENTE SUOUND SUOUND BACK FM ANT AM ANT QT7997 V/STB () (DVD ECODE) OPTICA1 OPTICA DIGITA ECODE O AC SUBWOOFE CD EC( TA Active subwoofer Surround speakers Surround back speakers Connect here if there is only one surround back speaker. 7

8 Home Theater connections -. Speakers ENGISH Preparation: Turn off all components before making any connections. Bi-wiring connection You can enjoy high quality sound by connecting to speakers designed for bi-wiring. BI-WIE compatible speakers have separate terminals for the high frequency and low frequency signals. When using a bi-wiring connection, select BI-WIE for Bi-wiring settings. (ápage 1) áefer to page 15 for Enjoying BI-AMP sound. HF:High frequency F: ow frequency Connections Front speaker () HF F Y PB P FONT A FONT B F BI-WIE HF CENTE SUO Front speaker () HF F DVD DVD ECODE S Speaker impedance: BI-WIE: 6-16 Ω Using speaker terminal B For connection to a second pair of speakers. Use the A terminals to enjoy multi-channel sound. If you select SPEAKES B only, playback is -channel. When a multi-channel source is played, the sounds intended for all the speakers are played through the front left and front right speakers (CH MIX). áefer to page 1 for Using SPEAKES B. Front speaker () Y PB P FONT A F BI-WIE FONT B HF CENTE SUOUND SUOUND Front speaker () DVD ECODE Speaker impedance: Front A and B: 6-16 Ω Front B: 6-16 Ω AC Home Theater connections -. AC mains lead QT FO THE UNITED KGDOM ONY EAD THE CAUTION FO THE AC MAS EAD ON PAGE BEFOE CONNECTION. ONT B HF CENTE SUOUND SUOUND BACK AC AC mains lead (included) To household mains socket Insertion of connector (Except the United Kingdom) Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. There is however no problem using the unit. Connect this cord after all other cables and cords are connected. Note The included AC mains lead is for use with this unit only. Do not use it with other equipment. Do not use AC mains lead from any other type of equipment with this unit. If the unit is left unplugged for longer than two weeks, all settings will revert to the factory settings. Perform the settings again if this occurs. Appliance inlet Connector Approx. 6 mm

9 PB PB P Y PB P P PB P Other connections Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. DVD recorder DVD recorder You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the settings. (ápage 1) FM ANT DIGITA AUDIO OOP AM ANT EXT AUDIO Y PB P TV MONITO Y PB P DVD COMPONENT AUDIO Y PB P DVD ECODE () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE DIGITA S CENTE Y PB P FONT A F Connections ENGISH SUBWOOFE CD EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIO AUDIO DVD ECODE VC1 nconnection with 1-pin scart cable (For continental Europe and the United Kingdom) FM ANT OOP EXT DIGITA FONT A Y PB P Y PB P Y PB P Y F AM ANT TV MONITO DVD COMPONENT DVD ECODE () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE DIGITA S CENTE AUDIO AV DVD recorder SUBWOOFE CD EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIO DVD ECODE VC1 nhigh picture quality connection Use this connection instead of the / connections (áabove). A COMPONENT connection provides a purer picture than a S- connection. Select a S- or COMPONENT connection to match the peripheral equipment. Video input can only be output again through the same type of terminal. nconnection to a DVD recorder with built-in VC áefer to page 1 for Using a DVD recorder with built-in VC. nconnection to equipment with DVD analogue 5.1CH terminals Connect as shown in DVD ANAOG 6CH connection (ápage 5), replacing the DVD player with a DVD recorder. áefer to page 1 for Playing DVD-Audio. VC (Playback only) DVD recorder with built-in VC DVD terminals DIGITA AUDIO DVD/VHS COMMON terminals AUDIO DVD COMPONENT DVD ECODE Y DVD ECODE VC1 TV MONITO DVD DVD ECODE S This unit OPTICA (DVD ECODE) DVD ECODE VC1 AUDIO VC1 Y PB P COMPONENT S- VC DVD recorder OOP EXT Y PB P Y PB P Y PB P Y PB P FM ANT AM ANT TV MONITO DVD DVD ECODE COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE TV/ST DIGITA S CENTE EC() PAY() SUBWOOFE CD TAPE SUBWOOFE SUOUND FONT DVD/DVD 6CH DVD ECODE VC1 AUDIO AUDIO AUDIO QT7997 9

10 Other connections Cable box or satellite receiver etc. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. ENGISH Connections When connecting to the video terminals, connect to the, S or COMPONENT terminals to match the TV s connection (ápages, 5). Video input can only be output again through the same type of terminal. You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the OOP settings.(ápage 1) FM ANT AM ANT EXT Y PB P TV MONITO Y PB P DVD COMPONENT Y PB P DVD ECODE () (DVD ECODE) (DVD) (CD) OPTICA11 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE DIGITA S CENTE Y PB P Y PB P COMPONENT S- AUDIO Cable box or satellite receiver etc. SUBWOOFE CD CD player EC() PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIO AUDIO DVD ECODE VC1 DIGITA AUDIO You can change the input settings for the digital terminals if necessary. Note the equipment you have connected to the terminals, then change the OOP EXT settings. (ápage 1) Y PB P Y PB P Y PB P Y PB P CD player FM ANT AM ANT TV MONITO DVD DVD ECODE COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE TV/S DIGITA S CENTE EC() PAY() SUBWOOFE SUOUND FONT SUBWOOFE CD CD TAPE DVD/DVD 6CH DVD ECODE VC1 AUDIO AUDIO DIGITA AUDIO E Tape deck OOP EXT Y PB P Y PB P Y PB P Y PB P Tape deck FM ANT AM ANT TV MONITO DVD DVD ECODE COMPONENT () (DVD ECODE) (DVD) (CD) OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD DVD ECODE VC1 TV MONITO DVD DVD ECODE TV/S DIGITA S CENTE EC() PAY() SUBWOOFE SUOUND FONT SUBWOOFE CD TAPE DVD/DVD 6CH DVD ECODE VC1 AUDIO AUDIO Game player etc. EC () PAY () These terminals are convenient for equipment you want to connect only temporarily. Select VC for input. QT SPEAKES A B DUA AMP BI-AMP BAND VC AUDIO PESET TUNE AUDIO Game player etc.

11 Antennas Adhesive tape 1 FM indoor antenna (included) Fix the other end of the antenna where reception is best. FM ANT FM outdoor antenna (not included) Disconnect the FM indoor antenna. The antenna should be installed by a competent technician. EC() (For continental Europe and the United Kingdom) SUBWOOFE TV MONITO () (DVD ECODE) (DVD) (CD) O OPTICA1 OPTICA COAXIA1 COAXIA TV MONITO DVD D DIGITA CENTE CD OOP AM ANT EXT Y PB P PAY() SUBWOOFE SUOUND FONT TAPE DVD/DVD 6CH AUDIO 1 Y O D AM loop antenna (included) Keep the antenna cord away from tape decks, DVD players, and other cords. ed Black White To connect a 75 Ω coaxial cable emove a piece of the outer vinyl insulator. emove the lead wire and clamp it with the plastic bar. Connections ENGISH FM ANT FM outdoor antenna 75 Ω coaxial cable Antenna plug (included for the United Kingdom) (For Australia and New Zealand) Two types of wire commonly used for connection from the antenna are 00 Ω parallel feeder wire and 75 Ω coaxial cable. For best resistance to interference, use 75 Ω coaxial cable. FM outdoor antenna 10 mm 7 mm Carefully pull the tabs apart to remove the cover. ead wire Plastic bar Install the coaxial cable. Clamp the cable conductor, and wind it on so that it does not contact anything else. 00 Ω feeder wire 75 Ω coaxial cable Clamp with pliers FM ANT or Antenna plug (included) Attach the cover. To connect a 00 Ω feeder wire oosen the screws, connect the wires, and tighten the screws to secure the connection. The remote control Batteries 1 Use Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit. emote control signal sensor 7 meters (6/6, AA, UM-) Insert so the poles (+ and ) match those in the remote control. Do not use rechargeable type batteries. Transmission window Keep the transmission window and the unit s sensor free from dust. Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. QT

12 ENGISH Settings eceiver settings - Basic Change the settings to tailor your equipment to the environment in which you are using it. Before making any changes, read the following descriptions of the settings and refer to the instructions for the speakers and equipment. Basic operations with the MUTI CONTO PUT SEECTO MUTI CONTO CANCE Turn to change. n To return to the previous setting/to cancel Press. Turn on. ENTE Press to enter. Use the MUTI CONTO menus to change the settings. (áleft Basic operations with the MUTI CONTO ) MUTI 1 Enter the MUTI CONTO. CONTO Select SETUP 1 ( BASIC SETUP scrolls once) and press [ENTE]. Select the settings to change. (ábelow, page 1) Speakers combination settings Set the speaker combination connected to this unit. The speaker combination has to be set in order for the sound to be output properly. CANCE PUT SEECTO Select SPK SET (SPEAKE SET) and press [ENTE]. Select if you have connected a subwoofer or not and press [ENTE]. SUBW NO: You have not connected one. SUBW YES: You have connected one. SETUP 1 Select the speaker combination connected to this unit and press [ENTE]. C S SB: All speakers connected _ S SB: No center speaker C S : No surround back speakers _ S : No center and surround back speakers C _: No surround and surround back speakers : Only front speakers 5 Select another setting Press [MUTI CONTO, CANCE] times to select EXIT and press [ENTE]. Bi-wiring settings Select this when you connect bi-wire compatible front speakers. (ápage 8) Select FNT / (FONT /) and press [ENTE]. Select BI-WIE and press [ENTE]. NOMA: Normal speakers BI-WIE: Bi-wire compatible speakers Select another setting Press [MUTI CONTO, CANCE] times to select EXIT and press [ENTE]. QT7997 Any changes to settings remain as set even if the power is turned off. áfor more detailed information on settings refer to eceiver settings - Advanced on page 1. ápage 5 Multi control menus and factory settings. Surround back speaker settings This is displayed when you connected surround back speakers in Speakers combination settings (áabove). Select this to set the number of surround back speakers. Select SB SPK (SUOUND BACK SPEAKE) and press [ENTE]. Select the number of speakers and press [ENTE]. 1 SPK: If you connect one surround back speaker. SPKS: If you connect two surround back speakers. Select another setting Press [MUTI CONTO, CANCE] times to select EXIT and press [ENTE]. 1

13 Changing the digital input terminals Change these settings to suit the connections you have made to the optical (OPT) and coaxial (COAX) digital input terminals. (ápages, 5, 9 and 10) You can only allocate one piece of equipment per terminal. Select D-PUT (DIGITA PUT) and press [ENTE]. Select the input position and press [ENTE]. Change the setting and press [ENTE]. epeat steps and to set other input positions., DV, DVD, CD OPT 1, OPT, COAX 1, COAX 5 Select another setting Press [MUTI CONTO, CANCE] several times to return to step in the operations across and select another setting. Press [MUTI CONTO, CANCE] several times to select EXIT and press [ENTE]. Input signal settings This unit automatically detects whether input is digital or analogue, but you can fix the input mode. Select AUTO when it is not necessary to fix the signal. Select MODE (PUT MODE) and press [ENTE]. Select the input position and press [ENTE]. Change the setting and press [ENTE]., DV, DVD, CD AUTO: Automatically detects the input signal and plays. (In AUTO, the unit distinguishes the digital signals then the analogue signals.) ANAOG: Fixes the input signal to analogue and plays. DIGITA: Fixes the input signal to digital and plays. PCM FIX: Fixes the input signal to PCM and plays. epeat steps and to set other input positions. 5 Select another setting Press [MUTI CONTO, CANCE] several times to return to step in the operations across and select another setting. Press [MUTI CONTO, CANCE] several times to select EXIT and press [ENTE]. Note regarding PCM FIX mode In rare cases, the unit may have trouble recognizing the digital signals on discs. With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs. When PCM FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select another mode in this case. This setting is not necessary when playback is normal. When an input position is set to PCM FIX, and the input signals are not from a PCM source, PCM FIX flashes on the display. Settings - Test Check that sound is output from the connected speakers. Adjust so output level from each speaker is balanced with the output level from the front speakers. : Front left C: Center : Front right S: Surround right S: Surround left SB: Surround back left SB: Surround back right SB: Surround back (If you connect one surround back speaker) SW: Subwoofer 1 Turn SPEAKES A on. -When using a BI-WIE connection- If you select SPEAKES B only, the test signal will not be output. Check the test signal output. A test signal is output from one speaker at a time for two seconds in the following order. Speakers set as _ (not connected) in Speakers combination settings (ápage 1) are skipped. If there is no output from a connected speaker, Stop the test signal (step 6) and check the connections (ápages 6 to 8) and settings (ápage 1, left) again. Adjust the main volume. Select the speaker channel. 5 SPEAKES A B Adjust the level. Adjust center, surround and surround back output to the same apparent level as the front speakers. C +db SW 10 VO- 50dB (M) (MAX) (M) (MAX) Factory settings: 0 db Factory setting: 10 Approximately two seconds after adjusting the level, a test signal is again output from each speaker in order. epeat steps and 5 to adjust the level of each speaker. 6 Stop the test signal. Settings ENGISH QT7997 1

14 Basic operations Playback ENGISH 1 Turn on. Turn SPEAKES A on. SPEAKES A B -When using a BI-WIE connection- Basic Operations If you use a BI-WIE connection for the front speakers, select BI-WIE in Bi-wiring settings. (ápage 1) Select input. PUT SEECTO 5 If DV is selected, DVD ECODE scrolls once on the display. If you watch a DVD etc., change to video input on the television. n Using a DVD recorder with built-in VC To play a DVD: Select DV To play a video cassette: Select VC 1 Start play of the source. The unit sets the sound mode (stereo or multichannel) to suit the input signal. Select the desired surround effects. (ápage 15) Adjust the volume. VOUME VO- 50dB DOWN UP (M) (MAX) When you finish listening Be sure to reduce the volume and press [8] to turn the unit to standby. QT Various kinds of playback n Playing DVD-Audio Playing DVD ANAOG 6CH You can enjoy high quality sound with DVD-Audio. áefer to page 5 for DVD ANAOG 6CH connection. Preparation: Turn SPEAKES on. DVD ANAOG 6CH only works when either SPEAKES A or BI-WIE is on. Set the selector to DVD. (áabove) When you connect to a DVD recorder, playback is not possible if DV is selected for input. Select DVD. Press and hold until DVD 6CH is displayed. To cancel, press and hold until DVD is displayed. Speaker settings (ápages 1, 1) are ineffective. Change the settings on the DVD player if necessary. Enjoying high quality -channel sound You can enjoy high quality stereo sound with 19 khz -channel DVD- Audio. 1. Cancel the DVD 6CH setting. (áabove). Set the input signal to ANAOG in Input signal settings. (ápage 1) n Using SPEAKES B áefer to page 8 for connecting SPEAKES B. Sound is output from the speaker connected to the FONT B terminals on this unit. To turn off the sound from the speaker connected to the A terminals, press [SPEAKES A] and cancel A. If you select SPEAKES B only: Playback is in stereo (-channel). When a multi-channel source is played with digital connections, CH MIX is displayed and the sounds intended for all the speakers are played through the front speakers. When DVD ANAOG 6CH is selected, the sound from the front channels is output. If you select SPEAKES B only, the following are set automatically irrespective of settings selected in speaker settings (ápages 1, 1). Speaker size: AGE Subwoofer: NO (Bass is output from the front speakers.) n Using headphones Press to turn all the speakers off. educe the volume and connect the headphones. The sound from the -When using a BI-WIE connection- headphones automatically becomes CH MIX. When DVD ANAOG 6CH is selected, the sound from the front channels is output.

15 Using Surround effects Adding surround effects. This unit does not automatically recognize the Dolby Digital Surround EX signal. The surround back channel is added by using Dolby Pro ogic. Dolby Pro ogic, DTS NEO:6 and SFC modes remain in effect until you change them. You cannot select Dolby Pro ogic, DTS NEO:6 and SFC at the same time. If you make any settings in Speakers combination settings, Surround back speaker settings or Speaker settings (ápages 1, 1) when using surround effects, the surround effects are cancelled. áefer to page 17 for information about limitations on using surround effects. Using Dolby Pro ogic Enjoy stereo (-channel) sources through multiple channels. (If you have not connected surround back speakers, play is in Dolby Pro ogic (ápage 1 Speakers combination settings ).) You can also enjoy Dolby Digital 5.1-channel and DTS 5.1-channel sources in 7.1(6.1)-channel. Select. MOVIE: Use this mode when playing movies. MUSIC: Use this mode when playing music. GAME: Enjoy games with greater audio impact. You can only use GAME mode when the input signal is -channel stereo. -When 1 SPK is selected in Surround back speaker settings (ápage 1) and there is a Dolby Digital 5.1-channel, DTS 5.1-channel, or Dolby Digital Surround EX sources- Select. n To cancel DOBY EX:Use this mode when playing movies. MUSIC: Using DTS NEO:6 Use this mode when playing music. n You can make further adjustments to the effect of MUSIC mode. (ápage 18) Use DTS NEO:6 to play -channel sources through multi-channels. (If all speakers are set to AGE in Speaker settings (ápage 1), there is no output from the subwoofer.) You can also enjoy Dolby Digital 5.1- channel and DTS 5.1-channel sources in 6.1-channel. Select. n To cancel CEMA:Use this mode when playing movies. MUSIC: Use this mode when playing music. n You can make further adjustments to the effect of MUSIC mode. (ápage 18) When the digital input S indicator lights with Dolby Digital -channel and DTS -channel sources, you can only use CEMA mode. When it does not light, you can only use MUSIC mode. (ápage 16 Display indicators ) Other playback functions n DUA AMP function Enjoy a higher quality sound during stereo (-channel) playback by playing the sound through the amplifiers used for multichannel sound sources. DUA AMP does not work in the following cases. When all the speakers are turned off During multi-channel playback When you are using Dolby Pro ogic, DTS NEO:6 or SFC (áabove) When the DUA AMP function does not work, the DUA AMP lamp goes out. n Enjoying BI-AMP sound (When the front speakers are BI-WIE compatible) The BI-AMP function uses separate amplifiers for the high frequency and low frequency sounds to the BI-WIE speakers during playback. This produces a higher quality sound. This function works when using a BI-WIE connection and input is analogue (excluding DVD 6CH) or a -channel PCM signal. áefer to page 8 for connecting BI-WIE speakers. Select BI-WIE for Bi-wiring settings. (ápage 1) For your reference When playing video sources connected to DVD ECODE. The picture remains on the screen even if you select, TUNE, CD or TAPE. Using the Sound Field Control (SFC) Enjoy an enhanced sound experience with greater presence and spread by using these SFC modes with Dolby Digital, DTS, PCM or analogue stereo sources. Choose from the following modes. Select. IVE: Imparts the reflection and spread of a large concert hall. POP/OCK: Best suited for dynamic sound such as pop and rock music. VOCA: Best suited to enhance vocals. JAZZ: ecreates natural sound ambience and direction. DANCE: Enjoy a dance hall like audio effect. Select. DAMA: Best suited for dialogues in drama movies. ACTION: Best suited for action movies with impact. SPOTS: Enjoy a feeling like being at a live sporting event. MUSICA: Enjoy a feeling like being at a live musical performance. GAME: Enjoy games with greater audio impact. n After pressing [MUSIC] or [AV/MOVIE], the mode changes even if you press. n To cancel n You can make further adjustments to these effects. (ápage 18) For your reference Depending on the combination of input source and SFC mode, sound may be distorted. In this case, decrease the SFC speaker level or effect (ápage 18). Try another SFC mode (áabove). Digital signals that can be played on this unit n Dolby Digital, including Dolby Digital Surround EX DVD etc. This is digital surround format developed by Dolby aboratories. Dolby Digital Surround EX adds a surround back channel to the traditional 5.1- channel format of Dolby Digital. This creates a sound with greater presence. n DTS including DTS-ES or DTS 96/ DVD etc. This digital surround system was developed by DTS (Digital Theater Systems, Inc.). DTS-ES adds a surround back channel to the traditional 5.1-channel format of DTS. This creates a sound with greater presence. DTS 96/ provides 96 khz sound at up to bits. The 96 khz/ bit high frequency sounds are played through multiple channels. n PCM signal CD, DVD-Audio etc. This unit s DIGITA COAXIA1 terminal can play up to 19 khz and the other DIGITA terminals can play up to 96 khz. n It cannot decode: Other digital signals, such as MPEG Dolby Digital F signals from a laser disc player Basic Operations ENGISH QT

16 Control guide Main unit ENGISH Standby/on switch [8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [SPEAKES, A, B] For selecting speakers A or B. Turning the speakers off automatically engages the STEEO/CH MIX mode (when listening through headphones, for example). [DUA AMP] ights when the DUA AMP function is activated. [BI-AMP] ights when the BI-AMP function is activated. [VOUME] Volume control. Operations emote control signal sensor SPEAKES A B DUA AMP BI-AMP BAND PESET TUNE MUTI CONTO CANCE ENTE PUT SEECTO DOWN VOUME UP PHONES [VC ] VC AUDIO For a game player, etc. [BAND] For switching between FM and AM. [PESET] Press to allow preset station selection with [ TUNE 1]. [ TUNE 1] For tuning the radio and selecting preset stations. Press and hold until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. Display indicators [E-MASTE] ights when the multisource re-master function is on. [MUTI CONTO] When you press the [MUTI CONTO, CANCE] button and enter the settings the indicator lights. [SEEP] Sleep timer indicator. [TUNED] A station is tuned. [ST] A stereo FM broadcast is tuned. [MONO] ights when using the monaural mode. [ M ] Flashes during automatic presetting. DS [, PS, PTY] (For continental Europe and the United Kingdom) DS : ights while DS signals are being received. PS, PTY:Indicates the current DS display mode. [MUTI CONTO, CANCE] Press to enter Multi control or cancel. [ENTE] Enters setting in Multi control. [PUT SEECTO] For selecting input. Selects each setting in Multi control. [PHONES] Headphone jack. Plug type: 6. mm stereo Avoid listening for prolonged periods of time to prevent hearing damage. Turn the speakers off when using the headphones. [DIGITA PUT] The channels contained in the digital input signal light. No sound is output from a channel if the speaker is set to _ (not connected) in Speakers combination settings (ápage 1) even if the channel indicator lights. : Front left channel C: Center channel : Front right channel S: Surround left channel SB: Surround back channel S: Surround right channel S: If the surround channel is monaural FE (ow Frequency Effects): Deep-bass effect [PCM] ights when the PCM FIX mode is set. E-MASTE MUTI CONTO SEEP SPEAKES A B BI-WIE TUNED ST MONO M DS PS PTY DIGITA PUT SOUND MODE CH MIX khz MHz C S SB S PCM S FE DIGITA EX DTS-ES DTS 96/ EX NEO:6 SFC P x STEEO QT [ SPEAKES A, B, BI-WIE ] Speaker indicators. A: Sound is output from speakers connected to the front A, surround, and center terminals. B: Sound is output only from speakers connected to the front B terminals. A, B: Sound is output from speakers connected to the front A, B, surround, and center terminals. A, B, BI-WIE: Sound is output from speakers connected by Bi-wiring. SOUND MODE DIGITA: DIGITA EX: EX: DTS-ES: DTS: DTS 96/: STEEO: General display Shows the input mode, radio frequency, and other general information. Dolby Digital decoder is being used. Dolby Digital Surround EX decoder (Dolby Pro ogic decoder) is being used when the input signal is Dolby Digital 5.1-channel or Dolby Digital Surround EX. Dolby Digital Surround EX decoder (Dolby Pro ogic decoder) is being used when the input signal is DTS. DTS-ES discrete or matrix decoder is being used. DTS decoder is being used. DTS 96/ decoder is being used. -channel stereo decoder is being used. [CH MIX] ights when playing a multi-channel source in CH MIX mode. [khz, MHz] Frequency unit indicators. khz: AM or PCM sampling frequency MHz: FM [SOUND MODE] The following light to indicate the source s input signal (multichannel digital signal) and the decoding format used. (ábelow) DIGITA EX and EX are displayed only when 1 SPK is selected in Surround back speaker settings. (ápage 1) P is displayed when using Dolby Pro ogic with stereo (-channel) sources and SB is set to _ in Speakers combination settings. (ápage 1) P : P : NEO:6: SFC: Dolby Pro ogic decoder is being used. Dolby Pro ogic decoder is being used. DTS NEO:6 matrix decoder is being used. SFC matrix function is being used.

17 emote control Buttons not explained on this page are used only to operate other equipment. áefer to the separate booklet, emote Control Operation Guide, for remote control operation details. [^, ECEIVE] Standby/on button. [1,,,, 5, 6, 7, 8, 9, 0] To enter radio frequencies and channels. [DISC, DIECT TUNG] To enable selection of radio stations by frequency. [ 10, / ] To enter two digit channels. [CD, VC, TUNE BAND, TV, DVD ECODE, DVD PAYE ANAOG 6CH] Input mode and remote control mode buttons. [1, CH, ] For selecting preset radio channels. [,, VOUME] To adjust the volume. Operations ENGISH [MUTI-SOUCE E-MASTE] For selecting a re-master mode. [DIMME] For dimming the unit s display. [ P ] Select MOVIE (DOBY EX), MUSIC or GAME when Dolby Pro ogic mode or Dolby Pro ogic mode is on. [DTS NEO:6] For selecting a DTS NEO:6 mode: CEMA or MUSIC. [SFC, MUSIC] For selecting a SFC mode: IVE, POP/OCK, VOCA, JAZZ or DANCE. [SFC, AV/MOVIE] For selecting a SFC mode: DAMA, ACTION, SPOTS, MUSICA or GAME. [OFF] To cancel surround effects. [SUBWOOFE] For selecting subwoofer level. [MUTG] To mute the volume. [TEST] To start the speaker test signal. [EVE] To adjust speaker level. [EFFECT] To adjust Dolby Pro ogic, DTS NEO:6 or SFC effects. [w,, q, ] First select EFFECT, EVE or SFC and then press [w, ] or [q, ] to complete the setting. imitations on using surround effects (ápage 15) Depending on the speaker settings and input signal (audio signal recorded on the disc etc.), some surround effects cannot be used. Speaker settings Input signal Surround effects that cannot be used Only front / + All Front / + Center + Multi-channel Dolby Pro ogic SFC Dolby Pro ogic SFC DTS NEO:6 DTS NEO:6 Front / + Center + -channel GAME mode (Dolby Pro ogic ) No surround back + Multi-channel Dolby Pro ogic DTS NEO:6 Input signal ( ( ) are display indicators ápage 16) 1-channel( C ) Surround sound is monaural ( S ) Excluding -channel sources -channel ( C ) PCM with a sampling frequency exceeding 96 khz Surround effects that cannot be used Dolby Pro ogic SFC DTS NEO:6 DTS-ES DTS 96/-ES Dolby Pro ogic DTS NEO:6 QT

18 AUDIO Sound quality/sound field/convenient functions ENGISH Operations SPEAKES A B DUA AMP BI-AMP BAND PESET VC TUNE MUTI CONTO CANCE MUTI CONTO ENTE CANCE ENTE PUT SEECTO PUT SEECTO DOWN VOUME UP PHONES Adjusting the level of each surround effect áefer to page 15 for information about surround effects. Using Dolby Pro ogic You can adjust the effect of MUSIC with DIMEN (Dimension Control), C-WDTH (Center Width Control) and PANOAMA. (Only when the input signal is -channel.) DIMEN (Dimension Control) You can make up for differences in the output level of the front and surround speakers. You can choose a level between and + - Increase the level to move sound to the front speakers, decrease to move it to the surround speakers. Select. Adjust. DIMEN 0 Factory setting: 0 C-WDTH (Center Width Control) This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 7 (center sound is spread out). Select. Adjust. C-WDTH Factory setting: PANOAMA Sound is spread out more so you feel like you are surrounded by music. Select. Select. PANOAMA : Factory setting Using DTS NEO:6 You can adjust the effect of MUSIC with the center image control. C-IMG (Center Image Control) This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 5 (center sound is spread out). Select. Adjust. QT Basic operations with the MUTI CONTO PUT SEECTO MUTI CONTO CANCE Turn to change. ENTE ápage 5 Multi control menus and factory settings. Press to enter. n To return to the previous setting/to cancel Press. n To select another settings Press several times to return to step in the operations across and select another setting. n To finish settings Press several times to select EXIT and press [ENTE]. C-IMG Factory setting: Using the Sound Field Control (SFC) To adjust the speaker level Select. Adjust. You can adjust the sound field by adjusting the level of the speakers and effect. These adjustments can be made for each SFC mode. Factory settings: 0 db Factory setting: 10 Speakers set as _ (not connected) in Speakers combination settings are skipped. (ápage 1) To adjust SFC effect Select. Adjust. Factory setting: 5

19 Use the MUTI CONTO menus to change the settings. (ápage 18 Basic operations with the MUTI CONTO ) MUTI 1 Enter the MUTI CONTO. CONTO Select the settings to change. (ábelow, right) Adjusting the tone You can adjust the level of the bass and treble. Select TONE and press [ENTE]. Select BASS or TEBE and press [ENTE]. Adjust the level and press [ENTE]. 5 Select another setting Adjusting the volume balance You can adjust the balance of the front speakers. Select BAANCE and press [ENTE]. Adjust the balance and press [ENTE]. Select another setting Adjusting the brightness of the display Dim the display for better viewing in a darkened room. Choose a level between 1 (bright) and (dim). Select DIMME and press [ENTE]. Select ON and press [ENTE]. Select OFF to cancel. BASS, TEBE OFF, ON Select the level and press [ENTE]. EVE 1, EVE, EVE 5 Select another setting When you operate the main unit or remote control, this is temporarily cancelled. Sleep timer The sleep timer can turn the unit off after a set time. It does not control any other components. Select SEEP and press [ENTE]. CANCE Select the time and press [ENTE]. When this is set, SEEP appears on the display. To cancel, select OFF. Select another setting (M) (MAX) OFF, 0, 60, 90, 10 (in minutes) To check the setting: After setting the time, you can check the remaining time using step. To change a setting: epeat the procedure from the beginning. The bar shows the standard balance. Changing the audio output (Dual program) When the input signal is Dolby Digital, DTS and DUA appears in the display, the audio to be output is set. Select OPTION and press [ENTE]. Select DUA PG (DUA POGAM) and press [ENTE]. Select the audio and press [ENTE]. MA: SAP: MA+SAP: 5 Select another setting Main audio output Sub channel audio output Main and sub channel audio output The setting remains in effect even if the power is turned off. istening comfortably at low volume Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) maintaining audio clarity. It reduces the peak level in loud scenes without affecting the sound field. Select OPTION and press [ENTE]. Select D COMP (DYNAMIC ANGE COMPESSION) and press [ENTE]. Select the level and press [ENTE]. OFF: The software is played with the original dynamic range. STANDAD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing). 5 Select another setting A/D attenuator Turn the A/D attenuator on if OVEFOW lights frequently when using -channel analogue input or DVD ANAOG 6CH input. Select OPTION and press [ENTE]. Select A/D ATT (A/D ATTENUATO) and press [ENTE]. Select ON and press [ENTE]. To cancel, select OFF. 5 Select another setting OFF, ON The ESET function The operation settings for the unit will be initialized to the settings made at the time of shipment. However, any preset radio stations will not be erased. Select OPTION and press [ENTE]. Select ESET and press [ENTE]. Select YES and press [ENTE]. To cancel, select NO. When you select YES, the input source becomes TUNE (Preset Channel 1). NO, YES Operations ENGISH QT

20 AUDIO Sound quality/sound field/convenient functions ENGISH Operations Adjusting the subwoofer level You can adjust the volume of the subwoofer while listening to a source. Sound can be distorted if you raise the volume while the subwoofer level is high. educe the subwoofer level if this occurs. Muting To mute the volume. Multi-source re-master This original feature boosts the frequencies of the higher harmonics that are lost during recording due to compression. You can enjoy a full, more natural sound with this. Select. Select. You can make fine settings by pressing [TEST] then adjusting the output level. (ápage 1) You cannot adjust the subwoofer level if DVD ANAOG 6CH is selected. Select SW --- to stop output. Factory setting: SW 10 MUTG IS ON scrolls on the display while the volume is muted. Muting is cancelled when the power is turned off. n To cancel: Press again EFFECT 1: EFFECT : EFFECT : EFFECT : OFF: For fast tracks (pop and rock) For tracks with a variety of tempos (jazz) For slow tracks (classical) For compressed audio signals The re-master processing is off (factory setting) Dimmer Dim the display for better viewing in a darkened room. Dolby Pro ogic, DTS NEO:6 and SFC are cancelled when using multi-source re-master. If you make any settings in Speakers combination settings, Surround back speaker settings or Speaker settings (ápages 1, 1) when using multi-source re-master, multisource re-master is cancelled. Multi-source re-master cannot be used in the following cases. When input signal is DTS 96/, PCM with sampling frequencies of 19, 176., 96 or 88. khz. n To cancel: Press again áefer to page 19 for adjusting the brightness of the display. Making a recording You can record to a tape deck connected to TAPE EC () or a DVD recorder connected to DVD ECODE. See the recording unit s operating instructions for details on how to prepare it for recording. PUT SEECTO 1 Select the source to be recorded. PUT SEECTO SPEAKES A B DUA AMP BI-AMP BAND PESET VC TUNE PUT SEECTO MUTI CONTO ENTE CANCE DOWN VOUME UP PHONES Begin recording. Follow your recording unit s operating instructions. Start the source to be recorded. Follow your equipment s operating instructions. QT7997 Note You cannot record a source connected through a digital terminal. When recording from a, DV, CD or DVD ensure the source is connected through the corresponding analogue terminals and ANAOG input is selected. (ápages, 5, 9, 10 and 1) With a tape deck, you can record any analogue source except TAPE. With a DVD recorder, you can record any analogue source except DV. When you select DVD ANAOG 6CH mode, only sound from the front left and right channels is recorded. 0