FTTH Products Cataolgue
|
|
- Wilfred Cannon
- 6 years ago
- Views:
Transcription
1 FTTH Products Cataolgue 1. Bow-type drop cable(gjxfh)- For indoor use Page 2 2. Self-supporting Bow-type drop cable(gjyxfch)- For Outdoor Arial Installation Page 4 3. Bow-type drop cable for duct (GJXFHA) Aluminium Armoured - For Outdoor duct Installation Page 6 4. Bow-type drop cable for duct(gjxfhs)steel Armoured - For outdoor duct installation Page 8 5. FTTH Splitter Distribution Box FDB-02XX For outdoor Page FTTH End-Terminal Box For indoor 6.1 FTTH Socket plate 2 SC ports 6.2 FTTH Termination box 4 SC ports (RB-FTB104B) 6.3 FTTH Termination box 4 SC ports (RB-FTB104C) Page FTTH Fast Assembly Connector - Prepolished Page Mechanical Splicer Page PLC Splitter Page Dome Mechanical Sealed Fiber optic splice Closure For FTTH- GS Page FTTH Typical application case Page 24 Sales@rollball.com.cn Page 1
2 1. Bow-type drop cable(gjxfh)- For indoor use Product details: The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then, the cable is completed with a black or color LSZH sheath. Characteristics: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber Simple structure, light weight and high practicability Novel flute design, easily strip and splice, simplify the installation and maintenance Low smoke, zero halogen and flame retardant sheath Optical Parameters: Characteristics G.652 G.657 <=0.45db/km <=0.45db/km (+20 <=0.3 db/km <=0.3 db/km Cable Cut-off Wavelength λcc <=1260nm =1260nm Structure Parameters: Cable Type GJXFH 1XN GJXFH 2XN Fiber Count Cable Size (mm) Cable weight kg/km Tensile strength Long/short term(n) Crush resistance Long/short term(n/100mm) 1 2.0x /80 500/ / x /80 500/ /30 Bending Radius Static/Dynamic (mm) Sales@rollball.com.cn Page 2
3 GJXFJH 1 2.0x /80 500/ /30 1XN GJXFDH 4XN 4 2.0x /80 500/ /30 Order Information: 1. Optical Fiber Unit Blank: Fiber J: Tight buffer fiber D: Fiber ribbon 2. Fiber count 3. Fiber type: Sales@rollball.com.cn Page 3
4 2. Self-supporting Bow-type drop cable(gjyxfch)- For Outdoor Arial Installation Product details: The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. A steel wire as the additional strength member is also applied. Then, the cable is completed with a black or color LSZH sheath. Characteristics: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber Single steel wire as the additional strength member ensures good performance of tensile strength Simple structure, light weight and high practicability Novel flute design, easily strip and splice, simplify the installation and maintenance Low smoke, zero halogen and flame retardant sheath Optical Parameters: Characteristics G.652 G.657 <=0.45db/km <=0.45db/km (+20 <=0.3 db/km <=0.3 db/km Cable Cut-off Wavelength λcc <=1260nm =1260nm Sales@rollball.com.cn Page 4
5 Structure Parameters: Cable Type Fiber Count Cable Size (mm) Cable weight kg/km Tensile strength Long/short term(n) Crush resistance (N/100mm) GJYXFCH 1 2.0x / /30 1XN GJYXFCH 2 2.0x / /30 2XN GJYXFJCH 1 2.0x / /30 1XN GJYXFDCH 4XN 4 2.0x / /30 Order Information: Bending Radius Static/Dynamic (mm) 1. Optical Fiber Unit Blank: Fiber J: Tight buffer fiber D: Fiber ribbon 2. Fiber count 3. Fiber type: Sales@rollball.com.cn Page 5
6 3. Bow-type drop cable for duct(gjxfha)- For outdoor duct installation Product details: The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then, the cable is completed with a black or color LSZH sheath. Characteristics: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber Simple structure, light weight and high practicability Novel flute design, easily strip and splice, simplify the installation and maintenance Low smoke, zero halogen and flame retardant sheath;pe sheath protects cable from ultraviolet radiation APL moisture barrier(alimunium coated) Optical Parameters: Characteristics G.652 G.657 <=0.45db/km <=0.45db/km (+20 <=0.3 db/km <=0.3 db/km Cable Cut-off Wavelength λcc <=1260nm =1260nm Structure Parameters: Cable Fiber Cable Cable Tensile Crush Bending Sales@rollball.com.cn Page 6
7 Type Count Size (mm) weight kg/km strength Long/short term(n) resistance (N/100mm) GJXFHA / /30 1XN GJXFHA 2XN / /30 Order Information: Radius Static/Dynamic (mm) 1. Optical Fiber Unit Blank: Fiber J: Tight buffer fiber D: Fiber ribbon 2. Fiber count 3. Fiber type: Sales@rollball.com.cn Page 7
8 4. Bow-type drop cable for duct(gjxfhs)- For outdoor duct installation Product details: The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then, the cable is completed with a black or color LSZH sheath. Characteristics: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber Simple structure, light weight and high practicability Novel flute design, easily strip and splice, simplify the installation and maintenance Low smoke, zero halogen and flame retardant sheath;pe sheath protects cable from ultraviolet radiation SPL moisture barrier (Steel coated) Optical Parameters: Characteristics G.652 G.657 <=0.45db/km <=0.45db/km (+20 <=0.3 db/km <=0.3 db/km Cable Cut-off Wavelength λcc <=1260nm =1260nm Sales@rollball.com.cn Page 8
9 Structure Parameters: Cable Type Fiber Count Cable Size (mm) Cable weight kg/km Tensile strength Long/short term(n) Crush resistance (N/100mm) GJXFHS / /30 1XN GJXFHS 2XN / /30 Order Information: Bending Radius Static/Dynamic (mm) 1. Optical Fiber Unit Blank: Fiber J: Tight buffer fiber D: Fiber ribbon 2. Fiber count 3. Fiber type Sales@rollball.com.cn Page 9
10 5. FTTH Splitter Distribution Box FDB-02XX For outdoor FDB-0208 FDB-0216 Product Description: It is used in in FTTH project to connect the outdoor normal cable with drop cable, Suitable for corridor, basement,room and building's outer walls application, With the function of mechanical splice,fusion splice,light splitting,wiring distributions. Features Industry Standard User Interface, be made of high impact plastic. Can accommodate 1x8 & 1X16 PLC splitter. Anti-UV, Ultra violet resistant and rainfall resistant. Up to 16 FTTH drops. Wall and pole mountable. 2 inlet ports, 16 outlet ports. Material: reinforced polycarbonate Application widely used in FTTH access network. Telecommunication Networks CATV Networks Data communications Networks Local Area Networks Dimension: Items Dimension(WxDxH) Max.Capacity Note Sales@rollball.com.cn Page 10
11 FDB X45X207mm 8 ports & splice Pole/Wall FDB x80x300mm 16 ports & splice Pole/Wall 6. FTTH End-Terminal Box For indoor 6.1: FTTH Socket plate 2 SC ports 6.2: FTTH Termination box 4 SC ports (RB-FTB104B) Application: Suitable to wall mount and desktop installation for home on FTTH. Features: Operation temperature:-25 ~70 ; Fiber capacity: 4 cores Sales@rollball.com.cn Page 11
12 Snap design, easy for instalaltion. Two layer struture for easy fiber management, one is for fusion, another is for distribution Support SC, FC, ST ports Dimension: 150mm 30mm 110mm Drop cable diameter: Φ7 Φ10m 6.3: FTTH Termination box 4 SC ports (RB-FTB104C) Application: Suitable to wall mount installation for floor on FTTH. Features: Operation temperature:-25 ~70 ; Fiber capacity: 4 cores Door right-open with lock design, easy for instalaltion. Two layer struture for easy fiber management, one is for fusion, another is for distribution Support SC, FC, ST ports Drop cable diameter: Φ7 Φ10m Sales@rollball.com.cn Page 12
13 7. FTTH Fast Assembly Connector - Prepolished Fast assembly connector is new type optical connector to use in field and FTTX connection. When engineers work in field for installation, maintenance, repair of optical fiber, they use it easily because it has no epoxy, no polishing. FEATURES 1. No special assembling tool 2. Easy for assembling with mechanical splice and no polishing 3. Easy for learning technology by a simple assembling method (within 1 and half minutes) 4. Minimize the defect rate by features of removal and reusable. 5. Cable tensile test complianted with Telcordia GR-326-CORE SPECIFICATIONS Article value Insertion loss 0.3 (max 0.4) Return loss Connector type Cable 40dB SC/PC, SC/APC drop 3.0mm / flat 2x3mm cable Sales@rollball.com.cn Page 13
14 8. Mechanical Splicer The Mechanical Splicer is used for fast splice and have good performance. Precise fiber guiding structure lead to low insertion. The tensile strength is more than 454g, and have very good thermal stability. The unique design make the fiber inserting smoothly. The splicer could be used for splicing any singlemode and multimode fiber. It can be applied for FTTH, Optical fiber cable fast-repair. Feature: 1. Fast splice without fusion machine 2. Low insertion loss 3. High tensile strength 4. Good thermal and environmental stability 5. Good design for simple assemble Specification: 1. Fiber diameter: 250 um or 900 um 2. life time: 30 years. 3. Insertion loss: <= 0.3db (Typical: 0.1db) 4. Return loss: >=40db 5. Tensile strength: >=454g Environmental: 1. Operating temperature: -40 to Temperature influence: IL change <= 0.5db 3. Vibration influence: IL change <= 0.2db 4. Water immersion influence: IL change <= 0.2db Dimension: 40mm x 4.0mm x 5.4mm (LxWxH) Assemble Tools: 1. Fiber cleaver 2. Fiber jacket/buffer tube stripper 3. Fiber stripper 4. Fiber needle Sales@rollball.com.cn Page 14
15 5. Alcolhol 6. Kimwipe 7. White adhesive tape 8. Kevlar shea 9. PLC Splitter Description Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Rollball provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements. Features λ λ λ λ λ Low Insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide Operating Wavelength: From 1260nm to 1650nm λ Wide Operating Temperature: From -40 to 85 λ High Reliability and Stability Applications λ λ λ FTTX Systems PON Networks CATV Links Sales@rollball.com.cn Page 15
16 λ Optical Signal Distribution Compliance λ λ λ Telcordia GR-1209-CORE Telcordia GR-1221-CORE RoHS Specifications Table 1 1 N PLC Splitter Parameters Operating Wavelength (nm) Fiber Type 1260~1650 SMF-28e or customer specified Insertion Loss (db)(s/p Grade) 4.0/ / / / / /20.5 Loss Uniformity (db) Return Loss (db) (S/P Grade) 50/55 50/55 50/55 50/55 50/55 50/55 Polarization Dependent Loss(dB) Directivity (db) Wavelength Dependent Loss(dB) Temperature Stability(-40~85 )(db) Operating Temperature ( ) -40~85 Storage Temperature ( ) -40~85 Table 2 2 N PLC Splitter Parameters Operating Wavelength (nm) Fiber Type 1260~1650 SMF-28e or customer specified Insertion Loss (db)(s/p Grade) Loss Uniformity (db) Return Loss (db) (S/P Grade) 50/55 50/55 50/55 50/55 50/55 Sales@rollball.com.cn Page 16
17 Polarization Dependent Loss(dB) Directivity (db) Wavelength Dependent Loss(dB) Temperature Stability(-40~85 )(db) Operating Temperature ( ) -40~85 Storage Temperature ( ) -40~85 Notes: 1. Specified without connectors. 2. Add an additional 0.2dB loss per connector. Mechanical Dimensions PLC Splitter Bare Fiber 1X8 PLC Splitter fiber ribbon X32 PLC Splitter 4X 8-fiber ribbon X 8-fiber ribbon 4 1X64 PLC Splitter 12 PLC Splitter Module Sales@rollball.com.cn Page 17
18 100X80X10 120X80X Page 18
19 10. Dome Mechanical Sealed Fiber optic splice Closure For FTTH- GS General GS-2004 Mechanical Sealed Fiber Optic Splice Closures is designed to simplify splice management. The high quality closure is engineered to reduce complexity associated with fiber splicing in the field, thus reducing installation time and training. No heat, adhesives, drills or powered equipment for installation or re-entry are required. These durable, easy to install closures will increase productivity, reduce labor expenses and last through the life time of your network. With Zhan tong s proven mechanical sealing technology, all Zhantong fiber optic closures are suitable for applications in optical fiber networks such as track (backbone), spur (branch) or distribution points Features Cable entry section is single-sided pot structure which is suitable for space constrained hand holes (also possible to be used in man-holes, telephone tunnels, wall-mounting and pole-mounting etc.) Closure adopts hoop/buckle mechanism which makes dismantling/assembling easy Cable entry section can accommodate maximum11cables (Including one in one out, one in two out and so on ) Supports loose tube cable, slotted core cable, drop cable. - Suitable for application in areas with limited space applications, too. (hand holes) - Applicable for all networks. FTTH /FTTC solutions. - Recommendation of life span for 15 to 20 years (depends on environment) - Concept of separate cable entries system - Laser caution signs provided on cover of the top tray -Size of splice tray smaller footprint than 8"x12"or 8"x24" Sales@rollball.com.cn Page 19
20 -360deg access permits complete access to all wirework and equipment Highlights: Constructed of a highly chemically resistant material Mechanical strength member clamp assembly Several sizes with interchangeable parts according to requirements Multiple cable entry options One special tools required Pressurization valve Varying cable port sizes cable sizes Expandable from two cable entries per end up to four - Use in Underground, Aerial applications -Prevents cable sheath movement with temperature changes - Expandable system to fit capacity and space - Butt configuration for splicing - Easy installation and re-entry - Provides ability to flash test - Accommodates all common trunk and feeder cables - Add cable with minimum disturbance; eliminates splice rebuilding when adding lines Applications Closure is suitable for up to 264 single fiber splicing, which can cover most of the applications in the fiber distribution networks like Fiber To The Home / Fiber To The Curb (FTTH/FTTC).Underground, aerial, or pedestal applications are possible with this closure. GJS-2004 has chemical and mechanical resistance for all the application areas in the fiber networks. Only butt configuration use Structural Mini-PLC Splitter installation Fiber Fusion installation Sales@rollball.com.cn Page 20
21 10.5. Specifications Technical characteristics Vibration Cable bend Cable torsion Rust resistance Temperature cycling Impact Immersion Air tightness Compression Chemical Resistance Re-entry No change in air pressure, immersed in water at room temperature stability of the container to observe 15 min no bubbles escape Fiber optic cable and Fiber can be bent under tension load for the 150N, bending angle of ± of the bending cycle. It can withstand torque than50n.m, to reverse the perspective of ± 90, a total of 10 times to reverse the cycle. No change in air pressure tests, water containers at room temperature immersion in the stability of observation should be no air bubbles escape 15min at the same time without weight loss, swelling and corrosion More than 10 times Without any effect on No change in air pressure, immersed in water at room temperature stability of the container to observe 15min no bubbles escape air pressure inside the box for the 100 ± 5kPa, soaking in water at room temperature stability of the container to observe 15 minutes without air bubbles escape, or the stability of a 24-hour observation barometer change direction. Optic Splice Closures can withstand the pressure 2000N/100mm time 1 min. No change in air pressure tests, water containers at room temperature immersion in the stability of observation should be no air bubbles escape 15min at the same time without weight loss, swelling and corrosion Optic Splice Closures required repeat procedures of the 3rd package after the test. Cable joint air pressure inside the box for the 100 ± 5kPa, soaking in water at room temperature stability of the container to observe 15 minutes without air bubbles escape, or the stability of a 24-hour observation barometer change direction Physical characteristics Material Dimension Engineering Plastics PC Coated ADC as stainless equivalent Stainless steel TPE H 495mm X D260mm Sales@rollball.com.cn Page 21
22 Weight (without kit) About 4.2 kg Cable diameter Ø8- Ø20 mm dia. 11, 1 big port for 1-4pcs Main cable with OD from 10 to Cable ports 17.5mm, 10 normal ports for 40pcs drop cable with OD from 5 to 7mm(one port accommodate 4pcs OD. 7mm drop cable). The elastic ring in port can be customized to suite the cable OD. Max. Splice tray capacity 11 Maximum fiber storage capacity Single fiber Package Information: Item is adequately packed and secured to withstand rough handling during transportation, to reach destination in good condition. Facilitate storage and normal issue at the store Packaging clearly marked with the following: Item Unit quantity Remarks Customer's Material Code Number Description of item Contract Number Supplier's/ Manufacturer's Name or Logo Heat shrinkable protective sleeve pcs Configuration as per capacity Nylon tie pcs Configuration as per capacity Labeling paper pcs Configuration as per capacity Special wrench pcs 3 Desiccant bag 2 Earthing wire pcs 1 Metal hoop set 1 Buffer tube m Configuration as per capacity Installation manual pcs Accessories Ordering: Pole mounted device Pressure testing valve Earthing deriving device Adjustable up to Ø 114mm 1 set 1 set References: Sales@rollball.com.cn Page 22
23 ITU-T L.13 Telcordia GR-771, GR-326 Telcordia GR-13-CORE and RUS PE-91 ISO 9001: Page 23
24 11. FTTH Typical application case FTTH for Multi-floors residential Building Drop Cable Fast Connector Socket 1 3M All Rights Reserved. Fiber Distribution Box for Floor Mechanical Splicer
25 FTTH for High residential Building Drop cable 18F FDB for Floor Splitter ONU End user FDB for Floor ONU 12F Splitter End User FO cable 6F FDB for Floor Splitter ONU End User 6cores Fiber Cable 1F FDB For Building OLT Eequipme 2 nt Room 3M All Rights Reserved. FDB - Fiber Distribution Box
26 FTTH for House 1. Use Outdoor FRP drop cable for entrance 2. Outdoor FRP drop cable come into multi-mdia box, and strip the jacket for specified length 3. Make the fast installation connector and finish the end termination and protection. 4. Connect the terminated drop cable to ONU. Multimedia box ONU Outdoor drop cable 3 Outdoor cabinet 3M All Rights Reserved. Outdoor cable Joint closure
27 FTTH for High Business Building LAN CO FRP drop cable LAN ONU FRP drop cable Splitter FO Distribution cable FO Distribution Cable ODF OSP Cable Splitter ODF/OLT OSP Cable 4 局端电缆 Building A (P2P) 3M All Rights Reserved. 局端电缆 Building B (PON)
SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division
SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division
More informationSPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE
SP-CTN-CT3000M,CT3000ML-00 ISSUED : 2015/02/11 PAGE : 8 SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE CT3000M/CT3000ML Fiber Optic Splice Closure 2 / 8 1. GENERAL This specification covers the standards
More informationCustomer-Owned Outside Plant
Customer Premises Products (Enterprise) 3 Customer-Owned Outside Plant Fiber Optic Splice Case 2178 Series and Accessories 372 Fiber Optic Dome Splice Closure FD Series 376 Fibrlok II Universal Optical
More informationSPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
More informationDOME OPTIC SPLICE CLOSURE
FIBER OPTIC SPIICE CLOSURE GJS-JKDH1001-120 BOX DIMENSION: W=140mm H=340mm Weight = 1.80 kgs Outer Internal structure Fuse fiber disc Type sealing ring Plastic hoop base Pole Mount Pole Mount 1 1. product
More informationNC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informationOPTICAL FIBRE CABLE NETWORK 2004/1
OPTICAL FIBRE CABLE NETWORK 2004/1 HELKAMA OPTICAL FIBRE CABLES Cabled optical fibre characteristics OS1 singlemode fibre SM ITU-T G.652 Mode field diameter 1310nm 9.3+/-0.5µm Mode field eccentricity 1.0
More informationSpec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer
Spec No.: ZTT 45012 Revision: 2 Date: Oct 3, 2014 TECHNICAL SPECIFICATION Optical Fiber Cable (Reference: NBR 14566) Designer Senior Technical Manager Approver Chief Technical Engineer Jiangsu Zhongtian
More informationOPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE
SPEC NO. TEC-OPTIC-81101A(Rev.4)-2014.07 TECHNICAL PROPOSAL FOR OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE ( Span length : Max. 100m ) APPROVED BY : J.Y. LEE / HEAD OF TEAM ENGINEERING TEAM
More informationOptical Fibre Cable Technical Specification. Duct Cable GYFTY-24,48,72,144,216B1.3
Version GYFTY-V1.0 Optical Fibre Cable Technical Specification Duct Cable GYFTY-24,48,72,144,216B1.3 Yangtze Optical Fibre and Cable Joint Stock Limited Company All rights reserved 1. Scope This Specification
More information3M Fiber Closures BPEO
3M Fiber Closures BPEO 2 3M Fiber Closures BPEO The 3M Fiber Closures BPEO are designed with flexibility in application in mind. With a range of sizes, they can be deployed above grade (pole, facade) or
More informationConnectivity accessories by Nestor Cables
Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com
More informatione-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service)
R e-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service) Optical Fiber Drop wire Closure Model FOC-CB1612-24DW. Available with optical fiber cable from 12 up to 24 fibers
More informationProduct Catalogue. Fiber Optic Assemblies & Adapters. Table of Contents General Description... 2
Product Catalogue Fiber Optic Assemblies & Adapters Table of Contents 1. General Description... 2 2. Connectors... 3 2.1 SC/UPC... 3 2.2 SC/APC... 3 2.3 FC/UPC... 3 2.4 FC/APC... 3 2.5 ST/UPC... 3 2.6
More informationPublic Works Division Lighting District Fiber Optic Specifications April 2009
Public Works Division Lighting District Fiber Optic Specifications April 2009 7000 Florida Street Punta Gorda, Florida 33950 Tele: 941.575.3600 Fax : 941.637.9265 www.charlottecountyfl.com/publicworks
More informationOrdering Guide of the Fiber-Optic Splice Closure (FOSC-400)
Page 1 of 11 Ordering Guide of the Fiber-Optic Splice Closure (FOSC-400) This document provides assistance with the selection of FOSC-400 closures. It includes the following sections: 1 Product description
More informationThe FiberMark1 offers an ideal solution for
Large Capacity Fiber Optic Splice Enclosure The Ideal Solution For Large Capacity Voice, Data, and Video Splicing Requirements. The FiberMark1 offers an ideal solution for larger fiber capacity voice,
More information2179-CD Series Fiber Optic Splice Closure. Installation Instructions
2179-CD Series Fiber Optic Splice Closure Installation Instructions 1.0 Product Introduction The new 3M TM 2179-CD Series Fiber Optic Splice Closure can be used in buried, underground, aerial, and pedestal
More informationGel-sealed in-line fiber optic closure
SCIL-C Gel donut INSTALLATION INSTRUCTION TC-1363-1-IP Rev A, Oct 2017 www.commscope.com Gel-sealed in-line fiber optic closure Contents 1 General 2 Sizing and product kit information 3 Installation conditions
More information2178 L/S Series Fiber Optic Splice Cases and Accessories
2178 L/S Series Fiber Optic Splice Cases and Accessories The 3M 2178 Fiber Optic Splice Case family has always given you great protection for fiber optic connections. Now, the addition of 3M 2178-L/S Series
More informationSpecification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan No. FB-KL4001C for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) Aug 2014 1 1. General This specification describes
More informationMicro duct Cable with HDPE Sheath for Installation by Blowing
Optical Fiber Cable Technology Specification INTERNAL Optical Fiber Cable Specification Micro duct Cable with HDPE Sheath for Installation by Blowing GCYFY-12/24/36/48/72/96/144/288/432/576B1.3 V7.0 2018-3-20,CCopyright.
More informationINSTALLATION INSTRUCTIONS
LIGHTGUARD 350-20-WTC SEALED FIBER OPTIC CLOSURE VIEW ONLINE TABLE OF CONTENTS: GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...3 PACKAGE CONTENTS: ACCESSORIES...3 RECOMMENDED TOOLS...3 ADD-ON COMPONENTS...4
More informationProduct Catalogue. Fibre Optic Cable
Product Catalogue Fibre Optic Cable version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around
More informationSJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1
Fiber Optic Splice Closure 1. Introduction 1.1 General SAMJIN s SJOF-BS604B protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct buried
More information3M Fiber Optic Closure System LL
3M Fiber Optic Closure System LL 3M Fiber Optic Closure System The 3M Fiber Optic Closure System LL provides a protective yet accessible environment for housing single or mass fusion fiber splices. The
More informationNon-metallic Aerial Distribution Optical Cables for FTTH Networks
Non-metallic Aerial Distribution Optical Cables for FTTH Networks Go Taki, 1 Akira Namazue, 1 and Ken Osato 1 One of the common practices to construct economical and efficient Fiber To The Home (FTTH)
More informationSPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:01 Date: 07.10.06 SPECIFICATION OF 96F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-96/SM/MTY(F)-MFN-O6.3 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More informationDelaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011
SECTION 271323 - COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 - GENERAL 1.1 DESCRIPTION A. This section provides the specifications for the work related to the optical fiber system in the project.
More informationSPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:00 Date: 08.03.2010 SPECIFICATION OF 192F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-192/SM/MTY(F)-MFN-O9.1 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More informationProduct information. OpDAT VIK with breakout cable. Product description. Illustrations. Page 1/7
Page /7 Illustrations Product description Pre-terminated installation cables (VIK) are fiber optic cables with connectors on one or both ends that are made in manual singleitem production at METZ CONNECT
More informationSumitomo Cable Specification SE-*RU. OFNP Rated Central Tube Cable with Optical Fibers. Issued: December 2014
Sumitomo Cable Specification SE-*RU Litepipe Ribbon Indoor Plenum Cable OFNP Rated Central Tube Cable with 12-432 Optical Fibers Issued: December 2014 78 Alexander Drive, Research Triangle Park, NC 27709
More informationEmpowering businesses through innovative network solutions.
Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around the world for nearly two decades. Our experience
More informationOPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks
OPTICAL FIBRE CABLES for very-high bit transmission and FTTx networks OPTICAL FIBRE CABLES SILEC CABLE REFERENCES AND KNOW-HOW Since 1983, Silec Cable has successfully supplied the major telecom operators,
More informationGF-KSW-48 Series of Fiber Optic Distribution Box. Instruction Manual
Instruction manual GF/KSW/48 Page Nr 1 GF-KSW-48 Series of Fiber Optic Distribution Box Instruction Manual 1. General Introduction GF-KSW-48 series of fiber optic distribution box is applicable to fiber
More informationFIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.
FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories
More informationMining and Petrochemical Fiber Optic Cables
Features and Benefits Loose construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation in outdoor or indoor/outdoor applications
More informationFiber Optic Closure. Fiber Optic Splice Closure For Aerial Line. Model : W-ICL-007-xxF. Features
Fiber Optic Splice Closure For Aerial Line Model : W-ICL-001-xxF Model : W-ICL-002-xxF Model : W-ICL-003-xxF Model : W-ICL-004-xxF Model : W-ICL-005-xxF Model : W-ICL-006-xxF Model : W-ICL-007-xxF Features
More informationFiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]
Fiber Optic Splice Closure GPJ09-8205 Instruction Manual [Escribir texto] 0 Table of Contents 1. General Introduction 2 2. Specification 2 3. Structure 2 4. Installation instructions. 4 5. Operation procedure.
More informationFIBRE OPTIC CABLE SOLUTIONS
point2point FIBRE OPTIC CABLE SOLUTIONS Introduction From patch-leads through to cross-site cables, or optical adapters through to patch panels, PPM s one-stopshop approach to fibre optic cable management
More informationUC FIBRE Optical Fibre Cable a fast, reliable and always available part of the Draka Datacom Solution. Be ready for the future: Draka Datacom Solution
Be ready for the future: Draka Datacom Solution Modern networks face stiff demands. They must be fast and reliable, resist fire and not interfere with other equipment. Optical Fibre Cable a fast, reliable
More informationFiber Optic Splice Closure GPJ Instruction Manual
Fiber Optic Splice Closure GPJ09-9401 Instruction Manual 1. Brief Introduction GPJ09-9401 type of Fiber Optic Splice Closure is a member in dome series, the main function is to provice direct pass, branch
More informationOPTICAL CHARACTERISTICS (applied to 12c MPO/MTP ) Item Parameter Reference
MPO/MTP TRUNK CABLE FEATURES MTP (US Conec) brand or MPO standard compliant multifiber connector Connector's design complies with IEC 61754-7 standards 4, 8, 12 and 24-fiber with single mode and multimode
More informationFREEDM Loose Tube Interlocking Armored Cables
features and benefits Flexible, interlocking armor design Gel-free waterblocking technology Color-coded tubes and fibers UV-resistant, flameretardant jacket UV-Resistant Flame-Retardant Outer Jacket InterlockingArmor
More informationLD Series High Performance Loose Tube Fiberoptic Cables
Fiberoptic Cables Catalog LD Series High Performance Loose Tube Fiberoptic Cables APPLICATIONS Long-distance outside plant telephone, CATV as well as data communications Direct burial and installation
More informationTECHNICAL SPECIFICATION
ISSUED : OCT. 02, 2006 PAGE : 1 OF 9 REV. : 1 TECHNICAL SPECIFICATION FOR GST 2006-043A LOOSE TUBE DRY CORE CABLE SINGLE JACKET/SINGLE ARMOR (SJSA CABLE) Prepared By : Oh-Heoung Kwon Engineer Optical Technical
More informationSPECIFICATION. Optical Fiber Cable
SPECIFICATION Optical Fiber Cable (GYFS) Prepared by Zhang xin Approved by Yin peng xiang 1 1 Product description GYFS is gel-free, single-jacket, single-armored cable for direct burial and duct GYFS is
More informationFOSC 400. Fiber Optic Splice Closure. Features
The FOSC name has been synonymous with excellence in sealing, fiber management, ease of use, and design flexibility since the FOSC 100 closure was first introduced in 1986. FOSC closures have always been
More informationStandard FTTH Drop Cable. FTTH DROP - nb6a1/g657a1
Optical Fibre Cable Technical Specification Standard FTTH Drop Cable FTTH DROP - nb6a1/g657a1 NextraCom Optical Fibre Cable All rights reserved 1.Scope This Specification covers the design requirements
More informationCable Jacket - The outermost layer of the fiber cable. Application: Types Single mode Multi mode. Simplex or Duplex available
Fiber Optic Products FIBER OPTIC PRODUCTS FIBER OPTIC PATCH CORD CABLE The Construction of a Fiber-Optic Cable Cable Jacket - The outermost layer of the fiber cable. Strengthening fibers - The strengthening
More informationFIBER OPTIC CABLES. Models GYXTC-8SS GJFJV
FIBER OPTIC CABLES ASTEL offers an innovative and wide range of Optical Fiber Cables from 4 Fiber to 144 Fibers for broadband networks. ASTEL offers variety of models from Uni-Tube construction, to Stranded
More informationOptical Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12
Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12 Our I-IFLRF20 series is a wideband RF over fiber link that provides optical transport of RF signals in radars, satcom, EW/ECM and other antenna remoting
More information2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table
FIST-GCO2-F INSTALLATION INSTRUCTION GCO2-FC GCO2-FD Content 1 Introduction 2 General 2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table 3 Installation
More information2178-L/S Series Fiber Optic Splice Case with Gasket
2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents
More information2178 Fiber Optic Splice Case and 2181 Cable Addition Kit
2178 Fiber Optic Splice Case and 2181 Cable Addition Kit Instructions January 1994 Issue 1, 34-7029-6387-6 1 2 Contents: 1.0 General... 4 2.0 Specifications... 4 3.0 Kit Contents... 5 SECTION 1: 2178 Splice
More informationCable installation guidelines
The Quality Connection Cable installation guidelines Business Unit Industrial Projects 2 Cable installation guidelines www.leoni-industrial-projects.com GENERAL Installation methods Many different methods
More informationOptical Distribution Box 300 Installation Guide. Version : R0.0
Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be
More informationHES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.
Technical Specification Revision/Date: 04/04.15 By N.KARAAĞAÇ Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSJSA41JYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657
More informationIntroduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content
Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content Page 1 of 10 GENERAL A fiber optic cable system is very similar to a copper wire system in that it is used to transmit data
More informationabout dktcomega DKTCOMEGA s mission
optical passives about dktcomega DKTCOMEGA designs optical and coaxial products for professional broadband operators and service providers. DKTCOMEGA s unique fibre optical product line, combined with
More informationSPECIAL SPECIFICATION 6559 Telecommunication Cable
2004 Specifications CSJ 0015-09-147, etc. SPECIAL SPECIFICATION 6559 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing, training,
More informationHCS - HES Cabling Systems
HCS - HES Cabling Systems Installation Manual for HCS High-Capacity Fiber-Optic Rack-Mount Cabinets Be sure to read and completely understand this procedure before applying product. Be sure to select the
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationTENDER SUMMARY. Tender Title:
TENDER SUMMARY Tender Title: Tender Ref: Closing Date: OPEN TENDER FOR THE SUPPLY OF FIBER OPTIC CABLE 384 CORE LOOSE TUBE ( FOC 384C ) FOR TELEKOM MALAYSIA BERHAD ( TM ) LPM/2018/T/02/FOC 384C 23 February
More informationSPECIAL SPECIFICATION 8540 Telecommunication Cable
2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,
More informationSINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS)
SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS) No. FT-S16274 Version: A (ITU-T Rec. G.652.D) Futong Group Communication Technology (Thailand) Co., Ltd. All Right Reserved Add: No.7/324, Moo 6, T.Mabyangporn
More informationFOSC-450 Product Range Ordering Guide
of the Gel Sealed Splice Closure (FOSC-450) 1 Product description 2 2 Ordering information 3 2.1 Basic FOSC closures 3 2.2 FOSC closure accessories 4 3 Product guide 5 3.1 Closure description 5 3.2 Closure
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationSumitomo Cable Specification SE-*RD. All-Dielectric Ribbon Cable with Fibers. Issued: April 2014
Sumitomo Cable Specification SE-*RD Litepipe Ribbon / ADS Sheath Cable All-Dielectric Ribbon Cable with 12-864 Fibers Issued: April 2014 78 Alexander Drive, Research Triangle Park, NC 27709 Phone (919)
More information3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes
FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24
More informationSPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting)
2004 Specifications CSJ 0086-14-046 SPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting) 1. Description. Furnish, install, splice, field terminate, and test the fiber optic cables. 2. Materials.
More informationOptiTect Premier Local Convergence Cabinet An Evolant Solutions Product
Description The OptiTect Premier Local Convergence Cabinet family provides everything necessary to manage 44, 288 and 432 distribution fibers for an outside plant FTTx application. The OptiTect Premier
More informationLTX Optical Distribution Panels. Ordering Guide
Contents LTX Optical Distribution Panels... 1... 1 Section One: LTX Overview... 3 1RU and 2RU Panels... 3 4RU Panels... 3 Patch Panels... 3 Combination Panels Patch and Splice... 4 Section Two: Unloaded
More informationSelection of a cable depends on functions such as The material Singlemode or multimode Step or graded index Wave length of the transmitter
Fibre Optic Communications The greatest advantage of fibre cable is that it is completely insensitive to electrical and magnetic disturbances. It is therefore ideal for harsh industrial environments. It
More informationOPTICAL CABLE FIBER-LAN INDOOR
OPTICAL CABLE FIBER-LAN INDOOR Product Type Optic Cable Construction RoHS-2 Compliant Dielectric Tight Buffer Singlemode or Multimode Description Optical cable with singlemode or multimode optical fibers
More informationFOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
More informationSOLO ADSS Short-Span Cables, Fibers
features and benefits Loose tube design Self-supporting Track-resistant jacket available Innovative waterblocking cable core SOLO ADSS Cable Drawing ZA-2615 Stable performance and compatibility with all
More informationSLiC Fiber Aerial Closure System
3 SLiC Fiber Aerial Closure System SLFC 533-SP SLFC 533-TS SLFC 733-SP Instructions May 2005 78-8135-4502-3-B N C H E S R A N G E M IL L IM E T E R S.4 10.6.8 A B C 15 20 I 1.0 Kit Contents Note: Examine
More informationSUMITOMO PRODUCT SPECIFICATION. FutureFLEX. TCxxMSOS DIELECTRIC HIGH PERFORMANCE OSP TUBE CABLE SERIES
SUMITOMO PRODUCT SPECIFICATION FutureFLEX TCxxMSOS DIELECTRIC HIGH PERFORMANCE OSP TUBE CABLE SERIES SUMITOMO ELECTRIC LIGHTWAVE CORP. 201 South Rogers Lane, Suite 100, Raleigh, NC 27610 (919) 541-8100
More informationFOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N
FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General
More information3M No Polish Jacketed SC/APC Connector
Communication Markets Division 3M No Polish Jacketed SC/APC Connector For use with 1.6 to 3.0 mm Jacketed Cable 3M No Polish SC/APC Connector enables fast, on-site termination of 1.6 mm to 3.0 mm jacketed
More informationFOSC 400. Fiber Optic Splice Closures
FOSC 400 Fiber Optic Splice Closures FOSC 400 - Fiber Optic Splice Closures The FOSC name is synonymous with excellence in sealing, fiber management, ease of use and design flexibility. The original FOSC
More informationOur cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY
Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY - SYMBOLS AND THE MEANING OF THE SYMBOLS FOR FIBRE OPTIC CABLES - SINGLE LOOSE TUBE, SINGLE SHEATH, NON METALLIC
More informationOPTICAL FIBERCONNECT. Version 3.
OPTICAL FIBERCONNECT Version 3. OPTICAL Fiberconnect intro In today s CATV networks the requirements for a wide choice of products for network applications are growing rapidly. In this brochure a comprehensive
More informationDetailed Specifications & Technical Data
For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents: No.10 for Fiber Optic Cables.pdf Cable Characteristics: DESCRIPTION: 2 to 12 optical fibers, Central gel filling
More informationSumitomo Cable Specification SE-*DB. 100% Dry - Armored Central Tube Ribbon Cable with Fibers. Issued: January 2014
Sumitomo Cable Specification SE-*DB DriTube Ribbon / Armorlux Sheath Cable 100% Dry - Armored Central Tube Ribbon Cable with 12-576 Fibers Issued: January 2014 78 Alexander Drive, Research Triangle Park,
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More information3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter
3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter Instructions January 2010 3 1.0 General 1.1 The 3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter(s) protects, organizes and stores
More informationRevision No. 4 Page No. Page 1 of 7
Page No. Page 1 of 7 Single Mode Optical Fibre Cables With Loose Fibres in Stranded Tubes And Corrugated Steel tape Armouring For Duct Applications LITE KABEL SDN. BHD. reserves the right to make changes
More informationCommunication Markets Division. 3M Fiber Closures. Smart design makes your job easier.
Communication Markets Division 3M Fiber Closures Smart design makes your job easier. 2 Your connections deserve the best protection. No matter the size and configuration of your network, protecting its
More informationSplice Closure Fiber (SCF) Family
features and benefits Sealed butt-style closure Aerial, wall, pole, direct buried Ribbon reel-end to reel-end splicing Split end caps Modular fiber management system standards Telcordia GR-771 tested RDUP
More informationInstallation of Optical Fiber
Application Notes Installation of Optical Fiber Author Mr. Prasanna Pardesi This procedure describes general information for installation of optical fiber cable pulled or blown in HDPE ducts. Keywords
More information3M No Polish Jacketed SC/APC Connector
Communication Markets Division 3M No Polish Jacketed SC/APC Connector For use with 1.6 to 3.0 mm Jacketed Cable 3M No Polish SC/APC Connector enables fast, on-site termination of 1.6 mm to 3.0 mm jacketed
More informationNumber of Fiber 6 Core 12 Core. Part Number
Order Information OUTDOOR OFC-Drop Wire, MM (OM2) (50/125) LOOSE TUBE BLACK Number of Fiber 6 Core 12 Core Part Number 74550006 74550012 1. General 1. Scope 2. Quality Assurance This specification covers
More informationGYFTY TECHNICAL SPECIFICATIONS FOR GYFTY CABLE
TECHNICAL SPECIFICATIONS FOR GYFTY CABLE 1 1. Product Description This specification covers the general requirements and performance of cable, which FOC offered including optical characteristics, mechanical
More informationFTTH & FITH. Discreet optical fiber solutions from the network connection point to the set-top box.
FTTH & FITH Discreet optical fiber solutions from the network connection point to the set-top box www.omelcom.com FIBER: THE FUTURE IS HERE The past several years have seen major progress in the penetration
More informationNumber of Fiber 12 Core 24 Core 48 Core. Part Number
Order Information OUTDOOR OFC-FIG.8, MM (OM2), (50/125) LOOSE TUBE BLACK 1. General 1. Scope 2. Quality Assurance Number of Fiber 12 Core 24 Core 48 Core Part Number 63460012 63460024 63460048 This specification
More informationOrdering Guide of the Generic Closure Organizer (FIST-GCO2)
Page 1 of 26 Ordering Guide of the Generic Closure Organizer (FIST-GCO2) This document provides assistance with the selection of FIST Generic Closure Organizers (FIST-GCO2) for use in FIST applications.
More information