Training Module Style Guide

Transcription

1 Training Module Style Guide December 2017

2 Glossary of Terms Ensco when referring to the company ENSCO when referring to a rig name (e.g. ENSCO DS-10) PayZone when referring to the Ensco Intranet jackup use capitalization and lower case as appropriate semisubmersible use capitalization and lower case as appropriate drillship - use capitalization and lower case as appropriate Logo Use The Ensco logo should be anchored in the top left corner of the module (do not use logo with tagline). The logo should not be smaller than 2 picas (0.375 /9.525 mm) in height and preferably larger up to 4 picas ( / mm) to fit application. Find logos in Download Graphics. Comply with clear space requirements when possible. X (height of the word) 1X Clear Space No other company s logo/name should be shown in the training module. Any modifications must be pre-approved by Corporate Branding. Color Ensco corporate colors must be used as primary template colors. Transparency levels may be used to have more color selections. Use appropriate color format for the use. Normally, for monitor viewing, either HEX or RGB formats are used. RGB: HEX #00A0D5 RGB: HEX #00467F RGB: HEX #E86D1F RGB: HEX #FFFFFF RGB: HEX # Light gray may also be used as a secondary color.

3 Text Font: Verdana to enhance on-screen readability. Aa Bb Cc Aa Bb Cc Verdana Regular Aa Bb Cc Aa Bb Cc Verdana Bold Main Title: Ensco dark blue, preferably size 20pt, flushed to the right (1/2 ) before the Ensco angle. Use Title case, not all caps. Secondary Title: Ensco orange, preferably size 18pt Body Text: Black, preferably size 16pt Lower Navigation Bar Navigation bar background should be one of the Ensco colors as shown. Bullets Top level: Format as shown matching text size and use one of the Ensco colors. Secondary bullets can be dashes or solid points.

4 Graphics See Design Basics in the Ensco Brand Site for guidance on use of support graphics such as staging bands and angles. Support graphics should be incorporated when possible to support the company s brand. Approved icons and symbols may also be used as appropriate. See Standards and Design Basics to learn more about icons and symbols. Asset Damage Downtime Dropped Loads Dropped Objects Environmental Damage Environmental Spills Fires Injuries Look the Crane Over

5 Report to Supervisor Test Safety Systems Top Off Fluids Add Attachement Add Comment Cancel Close Edit Help Link Next Review Save Search Submit

6 Boxes Pop up windows may be outlined or filled with Ensco brand colors or some transparency thereof. Font size 14pt solid color outline color

7 Call out boxes must have angle incorporated as the image below. The call out may bleed off of the page on either side. Font size 14pt Left side aligned Left side aligned Left side aligned Right side aligned Right side aligned Right side aligned Anywhere no bleed Anywhere no bleed Anywhere no bleed Double box dual color combinations Anywhere no bleed Right side aligned Left side aligned Single box solid color

8 Buttons Buttons are rectangle with rounded corners and may be orange or light blue Highlight text Designate text using an orange box around text to be highlighted; text color may change to orange Hyperlinks Hyperlinks should be Ensco dark blue and underlined Selection Check Boxes Square white background with Ensco dark blue outline. When selected, box should fill with Ensco orange. Photographs When possible, use Ensco approved photography to support the company s brand. See the Photography section in the Ensco Brand Site. Interactivity Photographs should be shaped in an angle format (picture 1) Click on the photo/graphics to select; and selected image appears with an outline around the image (picture 2). If multiple selections are on the page, make the photo/ graphic semi-transparent once selected to designate a place marker. 1.) 2.)

9 Use the following graphics to show correct or incorrect answers. Find these in Downloads/Training Modules Correct Inorrect Graphics that do not follow our standards must be pre-approved before using. Below is an example of round objects that were pre-approved.

10 Rig Worker When using a rig worker graphic, they must exemplify Ensco PPE standards including clean coveralls and tethered hardhat, proper boots, gloves, protective eyewear and earplugs. Hardhat with Ensco logo Clean cut with no facial hair Ensco logo patch on left sleeve. Go Beyond patch on right sleeve.