Chapter 10. SDI & HD-SDI SWITCHERS MSW 4V SDI rs Four Input SDI Video Switcher SW4 3G HD-SDI Four Input Multi-Rate SDI Switcher...

Transcription

1 Chapter 0 SDI & SDI & EXTENDERS G 0 Cable Equalizer for Multi-Rate SDI FOX Fiber Optic Extender for Multi-Rate SDI See page 48 SDI & DISTRIBUTION AMPLIFIERS MDA 4V SDI Four Output SDI Mini Distribution Amplifier MDA 4V Four Output Multi-Rate SDI Mini Distribution Amplifier SDI & SWITCHERS Four Input SDI Video Switcher SW4 G Four Input Multi-Rate SDI Switcher SDI & MATRIX SWITCHERS DXP SDI Series SDI Matrix Switchers HDXP Plus Series Multi-Rate SDI Matrix Switchers SMX Multi-Rate SDI Series Multi-Rate SDI Matrix Switcher Boards See page 76 ISM HDSDI Universal Video & RGB Scaler Output Board with Output for ISM See page 46 FOX 4G I/O 88 8x8 Multi-Rate SDI I/O Board for the FOX 4G Matrix 00/ See page 494 SDI & SIGNAL PROCESSORS SDI-AVR 00 SDI to Analog Video, Component, and RGB Converter See page 87 HDSDI-ACR 00 to Analog Component and RGB Converter See page 88

2 SDI & HD- SDI SDI & HD- SDI EX TENDERS G 0 Cable Equalizer for Multi-Rate SDI The G 0 is a one-input, one-output cable equalizer for multi-rate SDI digital video signals. It offers a convenient, economical solution for sending multi-rate SDI digital video signals over long coaxial cable runs. The G 0 supports all common serial digital video data rates up to.97 Gbps, and also passes embedded audio and other ancillary data allowed by the SMPTE and ITU specifications. Automatic input equalization adds up to 500 feet (50 m) for SDI data rates, and up to 400 feet (0 m) for data rates including G-SDI video. The G is housed in a one-eighth rack width, metal enclosure, providing integration-friendly mounting options into both new and existing A/V systems. Automatically adapts to SMPTE and ITU digital video standards Supports SDI and signals at data rates up to G-SDI video Automatic input equalization improves signal transmission distances: -- SDI - adds up to 500 feet (50 m) on RG adds up to 400 feet (0 m) on RG6 Automatic output reclocking Passes embedded audio, ancillary ID, and metadata information External universal power supply included, replacement part # G 0 Cable Equalizer Camera 400' RG6 Cable POWER V 0.4A MAX INPUT OUTPUT Display Gain Resolution Operation standards Auto data rate lock Data rates Input cable equalization, G-SDI SDI Minimum/maximum levels Impedance Input coupling Re-clocking Minimum/maximum levels Impedance External power supply Power input requirements Temperature/humidity Cooling Furniture mount Enclosure type Shipping weight Vibration Regulatory compliance Safety EMI/EMC MTBF Warranty Unity 8 or 0 bits, automatic SMPTE 59M, SMPTE 9M, SMPTE 44M, ITU-R BT.60, ITU-R BT.0, DVB-ASI single link SDI,, or G-SDI digital component video female BNC 9 Mbps to.97 Gbps Automatic for up to -0 db of cable loss 0 m (400') using RG6 cable 60 m (00') using RG59 cable 50 m (500') using RG6 cable 0 m (400') using RG59 cable 0.5 V to Vp-p with no offset 75 ohms AC single link SDI,, or G-SDI digital component video female BNC Automatic for 70 Mbps,.485 Gbps,.97 Gbps, or bypassed for other rates 0.5 V to.0 Vp-p 75 ohms 00 VAC to 40 VAC, Hz, external; to VDC, A, regulated VDC, 0. A Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing Convection, no vents, with optional U rack shelf or a back of the rack mounting kit, with optional under desk mounting kit Metal.0" H x." W x.0" D (<U high, one eighth rack wide) (.5 cm H x 5.6 cm W x 7.6 cm D) (Depth excludes connectors.) 0.4 lbs (0. kg) lbs ( kg) ISTA A in carton (International Safe Transit Association) CE, c-ul, UL CE, C-tick, FCC Class A, ICES, VCCI 0,000 hours years parts and labor G 0 Multi-Rate SDI Cable Equalizer

3 OPTION B OPTION A OVER RANGE STATUS OPERATE D I S T R I B U T I O N A M P L I F I E R S MDA 4V SDI Four Output SDI Mini Distribution Amplifier The MDA 4V SDI is a compact, four output distribution amplifier that accepts SMPTE-59M Serial Digital Video on a female BNC connector and amplifies the buffered and re-clocked output. It will automatically recognize PAL, NTSC, component 4::, and widescreen 4:: digital video standards. Automatic cable equalization typically equalizes greater than,000 feet (00 meters) at 70 Mbps through RG6 or equivalent high quality cable. Accepts SMPTE 59M Serial Digital Video Recognizes NTSC, PAL, component 4::, and widescreen 4:: digital video standards Automatic cable equalization typically equalizes greater than,000 feet (00 meters) at 70 Mbps Rack, under-desk, and projector-mountable, four per rack External universal power supply included, replacement part # Broadcast Monitor Operation standards External power supply Temperature/humidity 4 Mb/s (4f sc NTSC) 77 Mb/s (4f sc PAL) 70 Mb/s (4:: component video) 60 Mb/s (4:: widescreen component video), autoselected SMPTE-59M serial digital component video female BNC 4 re-clocked SMPTE-59M serial digital component video 4 female BNC 00 VAC to 40 VAC, Hz, external; to VDC, A, regulated Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing, with optional U rack shelf.7" H x 4." W x.0" D (U high, quarter rack wide) (4. cm H x.0 cm W x 7.6 cm D) (Depth excludes connectors and knobs.) 0.5 lbs (0. kg) POWER V.4A MAX Flat Panel Display MDA 4V SDI Distribution Amplifier Digital VTR Projector MDA 4V SDI x4 Serial Digital - SDI

4 OPTION B OPTION A OVER RANGE STATUS OPERATE OPTION B OPTION A OVER RANGE STATUS OPERATE D I S T R I B U T I O N A M P L I F I E R S MDA 4V Four Output Multi-Rate SDI Mini Distribution Amplifier The MDA 4V is a compact one input, four output distribution amplifier for SDI and multi-rate serial digital video signals up to.97 Gbps. It automatically recognizes and adapts to common serial digital video signals that comply with SMPTE and ITU standards, including SMPTE 59M, 9M, and 44M, and ITU-R.BT60 and BT0. The MDA 4V is ideal for use in broadcast and video production facilities, medical facilities, rental and staging, and other applications requiring a single serial digital video source to be sent to up to four displays at the same time. Automatically adapts to SMPTE and ITU digital video standards Supports data rates up to G-SDI video Passes embedded audio, ancillary ID and metadata information, and SD/HD-SDTI digital video signals Input rate presence LED indication Automatic input equalization: -- SDI - up to 400 feet (0 m) on RG up to 00 feet (60 m) on RG59 U, one-quarter rack width metal enclosure External universal power supply included, replacement part # Broadcast Monitor Operation standards Input cable equalization SDI External power supply Temperature/humidity SMPTE-59M, SMPTE9M, SMPTE44M, ITU-RBT.60, ITU-RBT.0 single link SDI,, or G-SDI digital component video female BNC Automatic 0 m (400') using RG6 cable 60 m (00') using RG59 cable 50 m (500') using RG6 cable 0 m (400') using RG59 cable 4 single link SDI,, or G-SDI digital component video 4 BNC female 00 VAC to 40 VAC, Hz, external, to VDC, A, regulated Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing With optional U rack shelf or with back of the rack mounting kit.7" H x 4." W x.0" D (U high, quarter rack wide) (4. cm H x 0.9 cm W x 7.6 cm D) (Depth excludes connectors.) 0.5 lbs (0. kg) Flat Panel Display MDA 4V Distribution Amplifier Camera Projector Broadcast Monitor MDA 4V x4 Multi-Rate SDI

5 I I I DISPLAY MUTE UP DOWN ON OFF IPL 50 R TX RX LINK ACT DOC CAM LAPTOP PC DVD S W I T C H E R S Four Input SDI Video Switcher The is a four input SDI, Serial Digital Interface, video switcher with two buffered, re-clocked outputs on BNC connectors. Dual outputs provide for viewing on two separate displays or the ability to record and view video simultaneously. Multiple control options are available, including auto-input switching, RS-, contact closure, and front panel input selection buttons with LED indicators. The is housed in a U, quarter rack width metal enclosure and includes an external, universal power supply. Compatible with all SMPTE 59M composite, component, and widescreen serial standards Buffered and re-clocked outputs Auto-input switching RS- control Contact closure remote control U, quarter rack width metal enclosure External universal power supply included, replacement part # POWER V.4A MAX Switcher 4 A S S D D O N U P T U P T U S T S B A B RS- Tx Rx CONTACT 4 RS- Digital Camcorder TCP/IP COM IR INPUT RELAY TouchLink Control System Digital Broadcast Digital Broadcast Resolution Operation standards Equalization and reclocking Automatic data rate clock MSW 4V rs, MSW 4V rs, Standards Serial control port External power supply Cooling Temperature/humidity Furniture mount Enclosure type MSW 4V SDI RS 8 or 0 bits, automatic 4 Mb/s (4f sc NTSC) 77 Mb/s (4f sc PAL) 70 Mb/s (4::) component video 60 Mb/s (4::) widescreen, autoselect Automatic for up to -0 db of cable loss 4 serial digital component video 4 female BNC Vp-p for Y of S-video and for composite video 0. Vp-p for C of S-video for SDI reclocked SMPTE-59 serial digital component video female BNC Vp-p for Y of S-video and for composite video 0. Vp-p for C of S-video for SDI SYNC SMPTE 59M CONTROL/REMOTE SWITCHER RS-,.5 mm captive screw connector, 5 pole 00 VAC to 40 VAC, Hz, external, to VDC, regulated Convection, no vents Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing, with optional U rack shelf, with optional mini under-desk mounting kit Metal.7" H x 4." W x.0" D (U high, quarter rack wide) (4. cm H x 0.9 cm W x 6.5 cm D) (Depth excludes connectors.) 0.6 lbs (0. kg) Four Input SDI Video

6 DOWN UP DISPLAY MUTE OFF ON IPL 50 R TX RX LINK ACT PC LAPTOP DOC CAM DVD S W I T C H E R S SW4 G Four Input Multi-Rate SDI Switcher The SW4 G is a multi-rate SDI digital video switcher. It is a convenient and economical solution for switching up to four signals as well as embedded audio, ancillary ID and metadata information. The switcher automatically recognizes and adapts to common SMPTE and ITU serial digital data rates, including 70 Mbps SDI,.485 Gbps, and.97 Gbps G-SDI. The switcher is housed in a compact, U high, halfrack width metal enclosure that is suitable for rack mounted or mobile applications. The SW4 G is ideal for applications where multi-rate digital video signals must be switched and then sent over long cable runs. Automatically adapts to SMPTE and ITU digital video standards Supports data rates up to G-SDI Passes embedded audio, ancillary ID and metadata information Input data rate reporting Automatic input equalization Automatic output reclocking Auto-input switching RS- control Internal universal power supply SW4 G Multi-Rate SDI Switcher VTR 00-40V 0.A 50-60Hz INPUTS 4 OUTPUTS SW4 G RS- RS- TCP/IP COM IR INPUT RELAY Cameras TouchLink Control System Monitor Projector Gain Unity Resolution 8 or 0 bits, automatic Operation standards SMPTE 59M, SMPTE 9M, SMPTE 44M, ITU-R BT.60, ITU-R BT.0, DVB-ASI (output only) Auto data rate lock 4 single link SDI,, or G-SDI digital component video 4 female BNC Data rates 9 Mbps to.97 Gbps Input cable equalization Automatic for up to -0 db of cable loss 0 m (400') using RG6 cable 60 m (00') using RG59 cable SDI 50 m (500') using RG6 cable 0 m (400') using RG59 cable ±0% Minimum/maximum levels 0.5 V to Vp-p with no offset Impedance 75 ohms single link SDI,, or G-SDI digital component video female BNC Re-clocking Automatic for 70 Mbps,.485 Gbps,.97 Gbps, or bypassed for other rates ±0% Minimum/maximum levels 0.5 V to.0 Vp-p Impedance 75 ohms CONTROL/REMOTE SWITCHER Serial control port RS-,.5 mm captive screw connector, pole Baud rate and protocol 9600 baud, 8 data bits, stop bit, no parity Program control control/configuration program for Windows Simple Instruction Set (SIS ) Power 00 VAC to 40 VAC, Hz, 4 watts, internal Temperature/humidity Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing Cooling Convection, no vents With optional U rack shelf Enclosure type Metal.7" H x 8.7" W x 6.0" D (U high, half rack wide) (4. cm H x. cm W x 5. cm D) (Depth excludes connectors.) lb (0.5 kg) Shipping weight lbs ( kg) Vibration ISTA A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-ul, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI MTBF 0,000 hours Warranty years parts and labor SW4 G Four Input Multi-Rate SDI Switcher

7 IPL 50 R TX RX LINK ACT DOWN UP DISPLAY MUTE OFF ON PC LAPTOP DOC CAM DVD M AT R I X S W I T C H E R S DXP SDI Series SDI Matrix Switchers DXP 44 SDI DXP 88 SDI The DXP SDI Series of serial digital video matrix switchers is ideal for switching multiple serial digital video signals to multiple digital video devices in video production studios, editing suites, staging events, and video broadcast studios. The DXP SDI Series conforms to the SMPTE 59M specification and support serial standards for 4 and 77 Mbps composite digital, 70 Mbps component digital, and 60 Mbps wide-screen digital video. Automatic cable equalization typically equalizes greater than 00 meters at 70 Mbps of RG6 or equivalent high quality cable. SMPTE 59M compliant Capable of switching 4fsc composite or 4:: component serial digital video standards Automatically accepts four SMPTE serial digital data rates: 4, 77, 70, and 60 Mbps Automatic input cable equalization typically equalizes greater than 00 meters at 70 Mbps of RG6 or equivalent high quality cable Output data muting when input source is lost DXP 88 SDI Matrix Switcher TCP/IP TouchLink Control System Data rates 4 Mbps, 77 Mbps, 70 Mbps, 60 Mbps Standard SMPTE 59M Input cable equalization to 00 m for data rates up to 70 Mbps to 00 m for data rates up to 60 Mbps Auto equalization Recommended cable type SHR or equivalent 0.8 V ±0% Rise and fall time (0-80%) 0.6 ns = 00 ps CONTROL/REMOTE SWITCHER Serial control port RS- or RS-4, female 9-pin D connector Power 00 VAC to 40 VAC, Hz, 40 watts, internal Temperature/humidity Storage: -40 to +58 F (-40 to +70 C) / 0% to 90%, noncondensing Operating: + to + F (0 to +50 C) / 0% to 90%, noncondensing, with included mounting brackets, U high Furniture mount, under- or through-furniture mounting with included brackets.75" H x 7.5" W x 9.5" D (U high, full rack wide) 4.4 cm H x 44.4 cm W x 4. cm D (Depth excludes connectors. Width excludes rack ears.) 4.9 lbs (. kg) COM IR INPUT RELAY RS- External Reference Preview Preview Camera VSC 900D Video Scan Converter Camera D-VTR Vectorscope Program Preview Digital Video Edit Station PROGRAM OUT Media Servers Computer DXP 44 SDI 4x4 SDI DXP 88 SDI 8x8 SDI

8 M AT R I X S W I T C H E R S HDXP Plus Series Multi-Rate SDI Matrix Switchers The HDXP Plus Series are multi-rate, serial digital matrix switchers that comply with SMPTE and ITU standards for serial digital video signals from 4 Mbps to.97 Gbps. They are capable of routing SDI, single link and dual link, and G-SDI digital video signals. In addition, the HDXP Plus Series will pass embedded audio, as well as ancillary ID and metadata information, along with the digital video signal. The HDXP Plus Series are ideal for routing HDTV and other high resolution digital video sources for digital cinema projection, bio-medical imaging, satellite mapping and visualization, rental and staging environments, and other applications. Series Automatically adapts to SMPTE and ITU digital video standards for G-SDI, and SDI Data rates from 4 Mbps to.97 Gbps Optimized for dual-link Passes embedded audio, ancillary ID and metadata information, and SD/HD-SDTI digital video signals Input equalization Output reclocking User-selectable reclocking modes Input preview mode with dedicated output I/O grouping IP Link Ethernet control RS- and RS-4 control port High Definition Digital Media Servers HDXP Plus 66 Multi-Rate SDI Matrix Switcher TCP/IP GlobalViewer A/V Resource Management and Remote Control Application Data rates 9 Mbps to.970 Gbps Standard SMPTE 59M, SMPTE 9M, SMPTE 7M, SMPTE 44M, ITU-R BT.60, ITU-R BT.0 Input cable equalization Automatic 50 m using RG6 or Belden 694A cable or equivalent 00 m using RG59 or Belden 505A cable or equivalent SDI 00 m using RG6 or Belden 694A cable or equivalent 50 m using RG59 or Belden 505A cable or equivalent 800 mv ±0% Rise and fall time (0-80%) SDI = 700 ps ± 00 ps = 50 ps ± 00 ps Re-clocking Automatic, or bypass mode for nonstandard rates, or fixed CONTROL/REMOTE SWITCHER Serial control ports RS- or RS-4, female 9-pin D connector RS- front panel.5 mm mini stereo jack Ethernet control port female RJ-45 connector Power 00 VAC to 40 VAC, Hz, 80 watts, internal Enclosure type Metal HDXP Plus 66, HDXP Plus 6 HDXP Plus HDXP Plus 66, HDXP Plus 6 HDXP Plus Shipping weight HDXP Plus 66, HDXP Plus 6 HDXP Plus.5" H x 7.0" W x 9.4" D (U high, full rack wide) (8.9 cm H x 4. cm W x.9 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) 5.5" H x 7.0" W x 9.4" D (U high, full rack wide) (. cm H x 4. cm W x.9 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) 8.9 lbs (4. kg).9 lbs (5.4 kg) 5 lbs (7 kg) 8 lbs (9 kg) Flat Panel Displays Digital Video Tape Recorders Projectors

9 M AT R I X S W I T C H E R S HDXP Plus 66 6x6 Multi-Rate SDI Matrix Switcher Unique U, full rack width HDXP Plus 66 6x6 Multi-Rate SDI Matrix Switcher HDXP Plus 6 x6 Multi-Rate SDI Matrix Switcher Unique U, full rack width HDXP Plus 6 x6 Multi-Rate SDI Matrix Switcher HDXP Plus x Multi-Rate SDI Matrix Switcher Unique Video genlock U, full rack width HDXP Plus x Multi-Rate SDI Matrix Switcher