12G/6G/3G/HD/SD-SDI over Single mode SFP-type Fiber Optic Extender Immune to Pathological. User Manual. rev: Made in Taiwan

Transcription

1 EX-36K 12G/6G/3G/HD/SD-SDI over Single mode SFP-type Fiber Optic Extender Immune to Pathological User Manual rev: Made in Taiwan

2 Safety and Notice The EX-36K 12G/6G/3G/HD/SD-SDI over Single mode SFP-type Fiber Optic Extender Immune to Pathological has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the EX-36K should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. Follow all instructions and warnings marked on this unit. Do not attempt to service this unit yourself, except where explained in this manual. Provide proper ventilation and air circulation and do not use near water. Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. Use only the power adapter and power cords and connection cables designed for this unit. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. TABLE OF CONTENTS INTRODUCTION... 1 FEATURES... 1 PACKAGE CONTENTS... 2 SPECIFICATIONS... 3 CONNECTION DIAGRAM... 4 PANEL DESCRIPTION... 5 LIMITED WARRANTY... 6

3 INTRODUCTION The EX-36K is an ideal and economic solution designed for transmission of multi-rate SDI video, with embedded audio and metadata over a single-mode fiber optic cable. The transmitter module receives one 12G/6G/3G/HD/SDI electrical input, perfectly converts SMPTE 292M, SMPTE 259M, SMPTE 424M, SMPTE 2082 or DVB-ASI electrical SDI signal to single-mode optic SDI signals. The receiver module receives optical signal from input SFP connector, and then perfectly converts it to electrical SDI signal. EX-36K is immune to pathological pattern (SMPTE RP-198) without introducing any flickers, and this feature further guarantees the transmission quality over optical fibers. Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. The EX-36K is perfect for today s broadcast applications, including video production, video editing, studio to studio and studio to CATV head end. In addition, since transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments. FEATURES Enable transmission of digital video signal over optical fiber* up to 10 km (6.25 miles) Standard SFP-type fiber optic connector Supports following protocols: SMPTE 259M (270Mbps) SMPTE 259M (360Mbps) SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps) SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps) SMPTE / HDTV (5.94Gbps and 5.94/1.001Gbps) SMPTE / HDTV (11.88Gbps and 11.88/1.001Gbps) DVB ASI (270Mbps) Immune to RP-198 pathological patterns Automatic reclocked One SDI loop out 12G/6G/3G/HD/SDI Input signal detection LED 1

4 SDI Loop-Out Fiber Loop-Out DVB Support Immune to RP G/HD/SD Detection Re-clocking Cable EQ Jitter (<0.2 UI) Bandwidth(2.97Gbps) Fiber Type 2 Optics type Transmission 3 EX-36K S SFP ~10km PACKAGE CONTENTS 1x EX-36K [TX & RX] 2x 5V power adapter 1x User Manual 2

5 SPECIFICATIONS Model Name EX-36K Technical EX-36K-TX EX-36K-RX Role of usage Transmitter [TX] Receiver [RX] SDI standards Auto HD/SD-SDI detection Supported protocols Video bandwidth Data rates Video support SDI signal type Output impedance Auto reclocker mode Fiber Transmission SD-SDI/ HD-SDI/ 3G-SDI/ 6G-SDI/12G-SDI Yes SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps) SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps) SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps) SMPTE / HDTV (5.94Gbps and 5.94/1.001Gbps) SMPTE / HDTV (11.88Gbps and 11.88/1.001Gbps) [11.88Gpbs & 11.88/1.001Gbps] 270 / 1483 / 1485 / 2967 / 2970 / 5940 / 11880Mbps [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30,1080p60,1080p59.94, 4K2Kp30, 4K2Kp60 [SD] NTSC@59.94Hz, PAL@50Hz SMPTE , SMPTE , SMPTE-424M, SMPTE-292M, SMPTE-259M, DVB-ASI 75Ω Automatic detection: 270Mbps / 1.483Gbps / 1.485Gbps / 2.97Gbps / 2.967Gbps / 5.94Gbps / 5.934Gbps / 11880Gbps / 11868Gbps Automatic bypass: 177Mbps / 360Mbps / 540Mbps 10km (6.25mi) Loop-out 1 reclocking SDI loop-out N/A Audio support RP-198 pathological patterns Yes Immune PCB Stack-up 4-layer board [impedance control differential 100Ω; single 50Ω] Input 1x BNC [SDI] 1x Optical SFP [SDI] Output BNC connector Optical fiber connector Mechanical Housing Dimensions [L x W x H] Weight Fixedness Power supply 1x Optical SFP [SDI] 1x BNC [SDI] (optional loop-out) 1x BNC [SDI] 75Ω inter-locked socket SFP-type Metal case Model 74 x 74 x 26mm [2.9" x 2.9" x 1.0"] Package 140 x 200 x 75mm [5.5" x 7.9" x 3"] Carton 420 x 400 x 300mm [1'5" x 1'4" x 11.8"] Model Package Power consumption Operation temperature Storage temperature Relative humidity 211g [7.4 oz] 440g [15.4 oz] Inter-locked power supply 5V 2A DC 3 Watts [max] 0~40 C [32~104 F] -20~60 C [-4~140 F] 20~90% RH [no condensation] 3

6 4 CONNECTION DIAGRAM

7 PANEL DESCRIPTION Transmitting unit EX-36K-TX Front Panel Rear Panel 1. 12G/6G/3G/HD/SD-SDI input 2. Power indicator 3. Link indicator 4. 5V DC power jack 5. 12G/6G/3G/HD/SD-SDI loopout 6. Optical output Receiving unit EX-36K-RX Front Panel Rear Panel 7. 12G/6G/3G/HD/SD-SDI output 8. Power indicator 9. Link indicator 10. 5V DC power jack 11. Optical input 5

8 LIMITED WARRANTY The SELLER warrants the EX-36K 12G/6G/3G/HD/SD-SDI over Single mode SFP-type Fiber Optic Extender Immune to Pathological to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surges. Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number. The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed. Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and cable must be free from any markings, scratches, and neatly coiled. The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the EX-36K features and specifications is subject to change without further notice. 6