KdM101 AV to DiGitAL (DVB-t) MODULAtOR

Size: px

Start display at page:

Download "KdM101 AV to DiGitAL (DVB-t) MODULAtOR"

Barnard Manning
6 years ago
Views:

1 KdM101 AV to DiGitAL (DVB-t) MODULAtOR instruction MANUAL KDM101 I nstruction Manual page 1

contents Introduction................................... 3 Main features................................ 3 Safet instructions............................... 3 Installation.................................... 4 General operation.

.................... 5 Operating adjustment via LCD and buttons.......... 5 Basic menu.................................... 6 Advanced menu................................ 6 RF output.

.......................... 8 Audio...................................... 8..................................... 9 Retrieve status.............................. 10 Sstem.

2 contents Introduction Main features Safet instructions Installation General operation Quick menu guide Sstem booting Main menu Submenu of advanced menu Operating adjustment via LCD and buttons Basic menu Advanced menu RF output Retrieve status RF output advanced Retrieve video status Audio Retrieve status Sstem table list Europe and New Zealand table list Australia Recommended MPEG-2 code rate Specifi cations Warrant against defects Branch contacts back page LCD displa Control buttons up/down/left/right/ok LED displa normal/pwr/video Operational = green Frame ground RF OUT Antenna Audio Audio DC IN + input input L R 12 V DC page 2 InstructIon Manual KDM101

3 introduction Thank ou for purchasing the Kingra KDM101 SD modulator. Please read this manual carefull prior to installation as it contains information which will ensure ou achieve the best performance from our KDM101. Main features Multiple video format compatibilit including 576i (720 x 576) PAL and 480i (720 x 480). Audio format compatibilit including MPEG-1 Laer ll Full compl with DVB-T standard range (Australia): range (New Zealand): Programmable PMT//Audio/PCR PID Programmable channel name and logical channel number insertion. User friendl setup including basic and advanced menus controlled via button and displa on LCD. SAFETY INSTRUCTIONS All the safet and operating Instructions should be read before the product is operated. For our safet ensure all instructions are adhered to. Cleaning Unplug the unit from the wall before cleaning. Do not use liquid or aerosol cleansers, use a damp cloth. Attachments Do not use attachments that are not recommended b Kingra as the can cause hazards. Water and moisture Do not use this product near water. Mounting The KDM101 can either be wall or shelf mounted. Ensure the unit is mounted securel so as not to cause harm to anone or to damage the product b being dislodged. Power cord protection Power-suppl cords should be routed so the are not pinched or placed where the could cause a trip hazard. Ventilation Slots and openings in the housing are provided for ventilation to prevent overheating and ensure reliable operation. These openings should never be blocked or covered b placing the unit on a carpet, flooring, furniture or fabric surface. The unit should not be placed in a built-in structure such as a cupboard or rack unless proper ventilation is provided. Power sources This unit should onl be operated using the power adaptor supplied. For power adaptor specifications please see page 14 of this manual or contact our local Kingra distributor or Standard Communications branch. Lightning For added protection of this unit; unplug it from the wall when left unattended or unused for long periods of time and disconnect the antenna or cable sstem. This will protect the product from lightning strikes or power surges. Object and liquid entr Never push objects of an kind into this product through openings as the ma touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of an kind on the unit. Servicing Do not attempt to service this product ourself as opening or removing covers ma expose ou to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage requiring service Unplug this unit from the wall and return it to our Kingra distributor or Standard Communications branch for servicing if an of the following occurs: 1. The power-suppl cord or plug is damaged 2. Liquid has been spilled, or objects have fallen into the unit. 3. The unit has been exposed to rain or water 4. If the unit has been dropped or damaged in anwa Heat The unit should be positioned awa from an heat sources such as radiators, fireplaces, cooking stoves, or other products (including amplifiers) that produce heat. KDM101 I nstruction manual page 3

installation Digital TV or set-top box Earth connection Power suppl TV antenna or KDM101 plaer (DVD, set top box, satellite receiver) GEnErAL operation After boot-up press the OK button to enter the

4 installation Digital TV or set-top box Earth connection Power suppl TV antenna or KDM101 plaer (DVD, set top box, satellite receiver) GEnErAL operation After boot-up press the OK button to enter the menus. Use the or arrows to select between basic and advanced menus. QuicK MEnu GuidE Sstem Booting In the Menus and Submenus, press the or arrows to scroll up or down. In the Settings, press the or arrows to modif values. In the Menus, press the or arrows to scroll forwards or backwards. In the Settings, press the or arrows to scroll forwards or backwards. In the Menus, press the OK button to select the Submenu. In the Submenus, press the OK button to select the setting. In the Settings, press the OK button to confi rm the setting. Main Menu Boot sstem Please wait... KDM i Model name RF Output frequenc Main Menu Basic OK Countr: Australia Main Menu Advanced OK RF Output : C33 ( ) Output level: 80 dbuv Audio Sstem page 4 InstructIon Manual

5 Submenu in RF Output OK RF Output Set RF Output OK Set Qualit RF Output Rtrv Status Tune Colour RF Output Advanced Enable Colour Bar Audio OK Encoder Rate: 128k Rtrv Status OK Set Service Name Sstem OK Sstem Rtrv Inventor Set LCN Sstem Reset Sstem Set PID Set NIT Set PDS Set TS ID Rtrv Status Operating Adjustment via LCD and Buttons For Basic and settings, press the OK button to access the adjustment mode. In this mode will be displaed in the upper right corner. Use the or arrows to select parameter values, then press the OK button * to confirm the KDM101 I nstruction manual page 5

6 setting. Basic Menu Press the OK button to enter the menu selecting page, then press the or arrows to select basic menu and press the OK button again. In this menu ou can change basic parameters such as output level and frequenc. Countr: In the basic menu, the first page is Countr selection. Australia Countr: Australia Press the OK button to access the adjustment mode. The LCD displa will show in the upper right corner. You can now press the or arrows to select the countr ou require. Press the OK button to save. Australia, Europe, New Zealand. : C33 (564.5 ) Use the same steps as above Output Level: 80 dbuv Use the same steps as above ADVANCED MENU RF Output RF Output: Setup RF Output Following the main Submenu flow charts (pages 4 and 5) enter the Setup RF Output mode. Countr: Australia Press the OK button to enter the next page for countr selection. Countr: Australia Press the OK button to access the adjustment mode. The LCD displa will show an in the upper right corner. You can now press the or arrows to select the countr ou require. Press the OK button to save. Australia, Europe, New Zealand. : C33 (564.5 ) Use the same steps as above to set the (C6-C69). Output Level: 80 dbuv Use the same steps as above to set the Output Level (65-80 dbuv). Carrier: 8K Use the same steps as above to set the Carrier (2K, 8K). PAGE 6 Instruction manual KDM101

7 Constellation: QAM64 FEC: 3/4 Use the same steps as above to set the Constellation (QPSK, QAM16, QAM64). Use the same steps as above to set the FEC (1/2, 2/3, 3/4, 5/6, 7/8). Guard Interval: 1/32 Use the same steps as above to set the Guard Interval (1/4, 1/8. 1/16, 1/32). I/Q Swap: Disable Are ou sure? Use the same steps as above to Enable/Disable the Spectral Inversion. When all the items in Setup RF Output are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Retrieve Status Following the main Submenu flow charts (pages 4 and 5) enter the Retrieve Status mode, ou can check the parameters of our previous settings in Setup RF Output. RF Output Advanced RF Output: Advanced Freq Offset: No Offset RF Output: Enable Are ou sure? Following the main Submenu flow charts (pages 4 and 5) enter the RF Output Advanced mode. Press the OK button to enter Freq Offset. Press the OK button to access Freq Offset adjustment mode. Use the or arrows to set the offset. Press the OK button to save. Use the same steps as above to Enable/Disable the RF Output Enable mode. When all the items in RF Output Advanced are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. : : Set Qualit Encoder Rate: 6M Are ou sure? Following the main Submenu flow charts (pages 4 and 5) enter the mode. Press the OK button to enter the Submenu. Press the OK button to access Set Qualit mode. Press the OK button to enter the next page to set the Encoder rate. Press the OK button to enter the Adjustment Mode. Use the or arrows to set the Encoder rate, Press the OK button to save. When all the items in are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. KDM101 I nstruction manual page 7

8 Tune Colour Cont: 128 Bright: 0 Hue: 128 Press the arrow to select tune colour, press the OK button to enter the Submenu. Press the OK button to access the adjust mode. Press the arrow to advance to the next character and the or arrows to set. Press the OK button to save (0-255). Use the same steps as above to set Bright (0-255). Use the same steps as above to set Hue (0-255). Satur: 136 Use the same steps as above to set Saturation (0-255). Are ou sure? When all the items in Tune Colour are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Enable Colour Bar Colour Bar: DISABLE Are ou sure? Press the arrow to select Enable Colour Bar, press the OK button to enter the Submenu. Press the OK button to the Colour Bar adjust mode. Press the or arrows to select Enable, Disable then press the OK button to save. When all the items in Enable Colour Bar are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Retrieve Status In Retrieve Status mode, ou can check the parameters of our previous settings in. Follow the main and Submenu flow charts (pages 4 and 5). Audio : Audio Following the main Submenu flow charts (pages 4 and 5) enter the Sstem. Press the OK button to enter the Submenu. Encoder Rate: 128K Press the OK button to enter Adjustment Mode using the or arrows to adjust the Encoder Rate then press the OK button to save (128K, 256K, 384K). Are ou sure? When all the items in Audio are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. PAGE 8 Instruction manual KDM101

9 : : Set Service Name Service Name: KINGRAY SD MOD Service Name: KINGRAY SD MOD Are ou sure? Set LCN Set LCN Following the main Submenu flow charts (pages 4 and 5) enter the Sstem. Press the OK button to enter the Submenu. Press the OK button to enter Set Service Name. Press the OK button to enter the next page to set the Service Name. Press the OK button to enter the Adjustment Mode. The LCD displa will show an in the upper right corner. Now press the or arrows to edit the Service Name. 0-9 and A-Z can be used up to 15 characters. Press the arrow to advance to the next character and the or arrows to set. Press the OK button to save. When the Service Name has been set, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Following the main Submenu flow charts (pages 4 and 5) enter the Set LCN. Press the OK button to enter the Submenu. LCN: 1 Press the OK button to enter LCN mode. Press the OK button to access edit mode. Now press the or arrows to set the LCN. Press the arrow to advance to the next character and the or arrows to set. Press the OK button to save (1-1023). Are ou sure? Set PID PMT: 1328 PCR: 769 : 33 When all the items in Set LCN are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Press the arrow to enter Set PID. Press the OK button to enter the Submenu PMT. Press the OK button to enter edit mode. Set the PID using the or arrows, use the arrow to advance to the next digit. Press the OK button to save ( excluding 71). Use the same steps as above to set the PCR ( ). Use the same steps as above to set the ( ). Audio 34 Use the same steps as above to set the Audio ( ). Are ou sure? When all the items in Set PID are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. KDM101 I nstruction manual page 9

10 Set NIT OrgNetwork ID: 8228 Network ID: Network Name NETWORK Press the arrow to enter Set NIT. Press the OK button to enter the original Original Network ID. Press the OK button to enter edit mode, use the or arrows to set ID. Press the arrow to advance to the next character and the or arrows to set. Press the OK button to save ( ). Network ID is then displaed. Use the same steps as above to enter the Network ID ( ). Network Name is then displaed. Use the same steps as above to enter the Network Name. (A-Z, 0-9, 7 Characters). Network Ver: 12 Network Version is then displaed. Use the steps above to enter the Network Version (1-31). Are ou sure? Set PDS Private Data: Are ou sure? When all the items in Set NIT are done, there will be a confirmation on the displa. Press the or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Use the arrow to enter Set PDS, press the OK button to enter Private Data. Press the OK button to enter edit mode and use the or arrows to set the first private data number. Press the arrow to advance to the next character and the or arrows to set. Once set, press the OK button to save (8 Hex). When all the items in Set PDS are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Set TS ID TS ID: 1 Are ou sure? Retrieve Status Use the arrow to enter Set TS ID, press the OK button to enter TS ID. Press the OK button to enter edit mode. Use the or arrows to set the first number of the TS ID. Press the arrow to advance to the next digit and or arrows to set ( ). Press the OK button to save ( ). When all the items in Set TS ID are done, there will be a confirmation on the displa. Press or arrows to select es or no. Select for es, all the settings above will be stored in the memor. Select n for no to cancel. Following the main Submenu flow charts (pages 4 and 5) enter the Sstem. In Retrieve Status mode. Press OK button to check the parameters of our previous settings in. PAGE 10 I nstruction manual KDM101

11 Sstem Sstem Sstem: Rtrv Inventor Following the main Submenu flow charts (pages 4 and 5) enter the Sstem. Press the OK button to enter the Submenu. Press the OK button to enter the next page, ou can check both hardware and software versions. Sstem Info: HW:1.00SW: 0.01 Press the to exit. arrow to access the next page for more information. Press the OK button Reset Sstem Sstem Reset Sstem Following the main Submenu flow charts (pages 4 and 5) enter the Sstem. Rset Mode: Hard Reset Are ou sure? Use the OK button to enter Sstem Reset Sstem, press the OK button to enter Reset Mode. Use the or arrows to select between either Hard, Soft or Default Reset Once set press the OK button to exit the edit mode. When the sstem reset is selected, there will be a confirmation on the displa. Press or arrows to select es or no. Select to reset the sstem, or select n to not reset the sstem. KDM101 I nstruction manual page 11

12 CHANNEL TABLE LIST EUROPE Appendix A Dig. Central Dig. Central Band III Band V LTE Dig.Central E E E E E E E E E E E E E E E E E E E E E E E E Band IV E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E PAGE 12 I nstruction manual KDM101

13 CHANNEL TABLE LIST New Zealand Appendix A australia Appendix A Dig. Central Dig. Central Dig. Central Dig. Central Band III LTE Dig. Central Band IV Band V E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E LTE E E E E E E E E E E E E E E Dig. Central Band V A Band IV KDM101 I nstruction manual page 13

14 Recommended MPEG-2 code rate Appendix B Modulation Constellation QPSK 16QAM 64QAM Specifications 6 Bandwidth 7 Bandwidth 8 Bandwidth FEC Guard Interval Guard Interval Guard Interval 1/4 1/8 1/16 1/32 1/4 1/8 1/16 1/32 1/4 1/8 1/16 1/32 1/2 Weak abilit of error correcting and anti-interference in this area / / / / / / / / / / / / / / range: 174~862 Input formal: CVBS Output level: Encoding format: MPEG2 (ISO/IEC ) / MPEG2 MP@ML resolutions: PAL 576i (720 x 576) Connector: RCA (75 Ω) Audio Input format: Stereo L/R channel Encoding format: MPEG-1 Audio Laer II (ISO/TEC ) Connector tpe: RCA (75 Ω) MER: Sstem PID setting: name: PSI: >38 db PMT / / Audio / PCR 15 characters NID/ONID/P.D.S./TS ID Logical channel number: Up to 1023 Control Modulator Local operation LCD panel Standard: DVB-T (ETSI EN ) General Characteristics bandwidth: 6/7/8 Tpe: Wall mount Carriers: 2K / 8K Dimensions: 36.5 x 150 x 150 mm Constellation: QPSK / 16QAM / 64QAM Guard interval: 1/4, 1/8, 1/16, 1/32 Code rate: 1/2, 2/3, 3/4, 5/6, 7/8 Power source: DC 12V (10.5 to 13.0 V) SMPS ( VAC / 50 Hz) / 1A Power consumption: 10 W PAGE 14 I nstruction manual KDM101

15 standard communications WARRANTY AGAINST DEFECTS This warrant against defects is given b Standard Communications Pt Ltd ACN (We, us, our or GME). Our contact details are set out in clause Consumer guarantees 1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for an other reasonabl foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable qualit and the failure does not amount to a major failure. 1.2 To the extent we are able, we exclude all other conditions, warranties and obligations which would otherwise be implied. 2. Warrant against defects 2.1 This warrant is in addition to and does not limit, exclude or restrict our rights under the Competition and Consumer Act 2010 (Australia) or an other mandator protection laws that ma appl. 2.2 We warrant our goods to be free from defects in materials and workmanship for the warrant period (see warrant table) from the date of original sale (or another period we agree to in writing). Subject to our obligations under clause 1.2, we will at our option, either repair or replace goods which we are satisfied are defective. We warrant an replacement parts for the remainder of the period of warrant for the goods into which the are incorporated. 2.3 To the extent permitted b law, our sole liabilit for breach of a condition, warrant or other obligation implied b law is limited. (a) in the case of goods we suppl, to an one of the following as we decide (i) the replacement of the goods or the suppl of equivalent goods; (ii) the repair of the goods; (iii) the cost of repairing the goods or of acquiring equivalent goods; (b) in the case of services we suppl, to an one of the following as we decide (i) the suppling of the services again; (ii) the cost of having the services supplied again. 2.4 For repairs outside the warrant period, we warrant our repairs to be free from defects in materials and workmanship for three months from the date of the original repair. We agree to re-repair or replace (at our option) an materials or workmanship which we are satisfied are defective. 2.5 We warrant that we will perform services with reasonable care and skill and agree to investigate an complaint regarding our services made in good faith. If we are satisfied that the complaint is justified, and as our sole liabilit to ou under this warrant (to the extent permitted at law), we agree to suppl those services again at no extra charge to ou. 2.6 To make a warrant claim ou must before the end of the applicable warrant period (see warrant table), at our own cost, return the goods ou allege are defective, provide written details of the defect, and give us an original or cop of the sales invoice or some other evidence showing details of the transaction. 2.7 Send our claim to: Standard Communications Pt Ltd. PO Box 96 Winston Hills, NSW 2153, Australia. Tel: (02) Fax: (02) servadmin@gme.net.au 2.8 If we determine that our goods are defective, we will pa for the cost of returning the repaired or replaced goods to ou, and reimburse ou for our reasonable expenses of sending our warrant claim to us. 3. What this warrant does not cover 3.1 This warrant will not appl in relation to: (a) goods modified or altered in an wa; (b) defects and damage caused b use with non Standard Communications products; (c) repairs performed other than b our authorised representative; (d) defects or damage resulting from misuse, accident, impact or neglect; (e) goods improperl installed or used in a manner contrar to the relevant instruction manual; or (f) goods where the serial number has been removed or made illegal. 4. Warrant period 4.1 We provide the following warrant on GME and Kingra products. No repair or replacement during the warrant period will renew or extend the warrant period past the period from original date of purchase. Product Tpe Standalone digital modulators Warrant Period 2 ears KDM101 I nstruction manual page 15

16 I NSTR UCT I ON M ANUAL K DM101 Drawing No: Part No:

KDM401 QUAD AV TO DIGITAL (DVB-T) MODULATOR

KDM401 QUAD AV TO DIGITAL (DVB-T) MODULATOR INSTRUCTION MANUAL KDM401 I NSTRUCTION MANUAL PAGE 1 CONTENTS INTRODUCTION.... 3 Main features.... 3 SAFETY INSTRUCTIONS.... 4 INSTALLATION.... 5 GENERAL OPERATION....