ELECTRIC SAWS. with most of current standards and directives, making RUBI electric saws the safest on the market.
|
|
- Della Parks
- 6 years ago
- Views:
Transcription
1
2 ELECTRIC SAWS The latest generation of electric saws consists of the DR, DS, DT, DU, DW machines and the new DX high performance models equipped with the latest technology. The most recent series offers a power range to suit all types of materials, tiles or building materials, as well as high precision miter cutting and other special angle cuts, in addition to accepting large formats, with heights of up to 9 (232 mm.) and cutting lengths of up to 51 (130 cm.). These models all incorporate thermal protective devices and overload cut off switches, and fully comply with most of current standards and directives, making RUBI electric saws the safest on the market. At the same time, RUBI also offers a large range of lighter portable cutters (models D and ND), for tiles and facings in general. These models are extremely easy to use and offer maximum safety guarantees, without any detriment to their range of features and high performance. The whole range of electrically operated machinery is fully approved by numerous organizations and comply with current CE, GS, CSA, and MEEI standards, offering the user full two years warranty in all RUBI international after-sales service centres.
3 Electric saws Diamant D D-200 The 100% rustproof machine Stop for repeated cuts. 100% rustproof. Foldable table for miter joints. 146 DIAMANT D DIAMANT D HP-0.88 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. Table, internal structure and chassis made entirely of stainless steel. Tip-up table for mitring up to 16 (42 cm.). Guide for 45º cuts (Ref ). Guide for cuts from 0 to 90º (Ref ). D /2 Ø 8 18 x 18 x Lb. (35 mm.) (200 mm.) (47x46x 26 cm.) (16 kg.)
4 Electric saws Diamant ND Foldable table. ND-125 The lightest most powerful portable in the market. With carrying case. Lateral Stop. DIAMANT ND DIAMANT ND HP-0.6 kw 2 * V 50/60 Hz V 50/60 Hz. U.K V 50/60 Hz. CH V 50/60 Hz. USA V 50/60 Hz. AUSTR DIAMANT ND-125 WITHOUT CASE 230 V 50/60 Hz HP-0.6 kw 230 V 50/60 Hz. U.K V 50/60 Hz. CH V 50/60 Hz. USA V 50/60 Hz. AUS V 50/60 Hz V 50/60 Hz. USA V 50/60 Hz. U.K V 50/60 Hz. DK V 50/60 Hz V 50/60 Hz. USA V 50/60 Hz. U.K V 50/60 Hz. DK For gres, ceramic, glass, tiles, marble and other materials Ø 4 1/2 (115 mm.) or 5 (125 mm.) diamond blade. Ø 5 (125 mm.) diamond blade included. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With carrying case. Direct drive. Pal Box Available. See page ND /32 / 1 1 /4 4 1 / /4 x 11 x Lb. (25 / 30 mm.) ( mm.) (40 x 30 x 14 cm.) (4 kg.)
5 Electric saws Diamant ND ND-180-E ND The largest product range in the world. ND DIAMANT ND DIAMANT ND-180-E 0.5 HP-0.37 kw 1 * V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK V 60 Hz. USA DIAMANT ND HP-0.37 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK V 60 Hz. USA V 60 Hz. CSA For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 7 (180 mm.) included. With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). Tip-up table for mitring up to 8 (20 cm.) ND-180-E and 18 (45 cm.) ND-180. With guide to allow repetitive cuts. Stainless steel work-table. Direct drive. Guide for 45º cuts (Ref ). Guide for cuts from 0 to 90º (Ref ). Tray (Ref ) ND-180-E /6 Ø 7 19 x 15 3 /4 x 9 1 / Lb (20 cm.) (35 mm.) (180 mm.) (48 x 40 x 23) (13 kg) ND /6 Ø 7 19 x 17 x 9 1 / Lb (45 cm.) (35 mm.) (180 mm.) (48,5 x 43 x 23 ) (13,9 kg)
6 Electric saws Diamant ND ND-200 ND The largest product range in the world. ND-300 DIAMANT ND 149 DIAMANT ND HP-0.88 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK V 60 Hz. USA V 60 Hz. CSA DIAMANT ND HP-1.5 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK V 60 Hz. USA V 60 Hz. CSA For gres, ceramic, glass, tiles, marble and other materials. Ø 8 (200 mm.) diamond disc included in ND-200 Ø 12 (300 mm.) diamond disc not included in ND-300 With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). Tip-up table for mitring up to 20 (50 cm.) for ND-200 and 24 (60 cm.) ND-300. With guide to allow repetitive cuts. Stainless steel work-table. Direct drive. Guide for 45º cuts (Ref ). Guide for cuts from 0 to 90º (Ref ). Tray (Ref ). ND /8 Ø /8 x 20 3 /4 x Lb (50 cm.) (40 mm.) (200 mm.) (51 x 52,5 x 24 cm.) (15 kg) ND Ø x 24 x Lb (60 cm.) (75 mm.) (300 mm.) (69 x 63 x 26 cm.) (30,5 kg)
7 Electric saws Diamant DU and DU-L Foldable head for miter cutting. DU-200 / DU-200-L Gradable stop. Gradable square. 150 DIAMANT DU DIAMANT DU HP-0.73 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK DIAMANT DU-200-L 1 HP-0.73 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.). Direct drive. Support table (Ref ). Roller table extension (Ref ). DU x 13 2 Ø 8 33 x 15 x Lb (45 cm.) (32x32 cm.) (48 mm.) (200 mm.) (85 x 40 x 32) (26 kg) DU-200-L x 18 2 Ø 8 41 x 15 x Lb (65 cm.) (46x46 cm.) (48 mm.) (200 mm.) (105 x 40 x 32) (30 kg)
8 Electric saws Diamant DW and DW-L Foldable head for miter cutting. DW-200 / DW-200-L Gradable stop and square. Adjustable plunge cut. 151 DIAMANT DW DIAMANT DW HP-0.73 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK DIAMANT DW-200-L 1 HP-0.73 kw V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Electric cable: 4.9 ft. (1,5 m.). Motor assembly mounted on fold-away sliding bearings for miter cuts. Vertically adjustable mobile head with plunge cut effect. Reinforced chassis, structural rigidity. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.) Direct drive. Support table (Ref ). Roller table extension (Ref ). DW * x 14 2 / 3 Ø 8 33 x 15 x Lb (45-*50 cm.) (35x35 cm.) (48 / 75 mm.) (200 mm.) (85x40x40,6 cm.) (27 kg.) DW-200-L * x 19 2 / 3 Ø 8 41 x 15 x Lb (63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x40,6 cm.) (31 kg.) * Using plunge cut effect.
9 Electric saws Diamant DW-LP DW-200-LP Foldable head for miter cutting. Gradable stop and square. Adjustable plunge cut. 152 DIAMANT DW DIAMANT DW-200-LP 1 HP-0.73 kw 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 60 Hz. USA V 60 Hz V 60 Hz. USA V 50 Hz V 50 Hz. UK V 60 Hz. J.P V 50 Hz. J.P For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.) Direct drive. Roller table extension (Ref ). * Using plunge cut effect. DW-200-LP *28 19 x 19 2 / 3 Ø 8 41 x 15 x Lb (63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x116 cm.) (38 kg.)
10 Electric saws Diamant DW-N Detachable table. DW-200-N / 250-N System of foldable legs. Wheels to facilitate transport. DIAMANT DW-N DIAMANT DW-200-N 1.5 HP-1.1 kw 230 V 50 Hz. 220 V 60 Hz V 60 Hz. USA *2 110 V 50 Hz. UK V 60 Hz. JP V 50 Hz. UK V 50 Hz DIAMANT DW-250-N 230 V 50 Hz HP-1.1 kw 220 V 60 Hz V 60 Hz. USA *2 110 V 50 Hz. UK V 60 Hz. JP V 50 Hz. UK V 50 Hz For gres, ceramic, glass, tiles, marble and other materials. Ø 8 (200 mm.) diamond disc included in DW-200-N. Ø 10 (250mm.) diamond disc included in DW-250-N. With thermic security switch. Water pump refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. System of foldable legs. Includes wheels and a handle to ease the movement of the machine and its loading on to a vehicle. Detachable table to facilitate the cleaning of the machine. 230 V 50 Hz. CH V 60 Hz. USA V 60 Hz V 50 Hz. JP V 50 Hz. AUS V 50 Hz. DK V 50 Hz. CH V 60 Hz. USA V 60 Hz V 50 Hz. JP V 50 Hz. AUS V 50 Hz. DK New guide with an easily adjustable ruler. Electric cable: 4.9 ft. (1,5 m.) Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut. Direct drive. Roller table extension (Ref ) Cleaning block (Ref ) Special slides for mitre cutting (Ref ) 153 * Using plunge cut effect. DW-200-N *29 21 x /8 / 2 3 /16 Ø 8 45 x 18 x Lb. (73-*75 cm.) (52x52 cm.) (32 / 55 mm.) (200 mm.) (116x48x116 cm.) (46 kg.) DW-250-N *29 21 x /8 / 3 1 /4 Ø x 18 x Lb. (73-*75 cm.) (52x52 cm.) (65 / 80 mm.) (250 mm.) (116x48x116 cm.) (47 kg.)
11 Electric saws Diamant DS-LPS DS-230-LPS Foldable head for miter cutting. Adjustable plunge cut. Stop for repeated cuts 154 DIAMANT DS-LPS DIAMANT DS-230-LPS 230 V 50 Hz HP-1.1 kw 230 V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR **1 220 V 60 Hz V 60 Hz. USA V 60 Hz V 60 Hz. USA V 50 Hz V 50 Hz. UK For gres, ceramic, glass, tiles, marble and other materials. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Diamond blade Ø 9 (230 mm.) not included. Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With table 21 x 26 (55 x 68 cm.) Direct drive. For mitre cutting very tough materials, we recommend the use of the special slides (Ref.57991). Roller table extension (Ref ). Special slides for mitre cutting (Ref ). * Using plunge cut effect. DS-230-LPS 2875 *28 19 x19 2 /3 Ø 9 43 x21 x55 1/ Lb Lb (*71 cm.) (50x50 cm.) (50 / 90 mm.) (230 mm.) (110x55x140 cm.) (66 kg.) (74 kg.)
12 Electric saws Diamant DS-EP Foldable head for miter cutting. DS-250-EP Gradable stop and square. Adjustable plunge cut. DIAMANT DS-EP DIAMANT DS-250-EP 1.5 HP-1.1 kw 1 **1 230 V 50 Hz V 50 Hz. U.K V 60 Hz. USA V 60 Hz V 50 Hz. U.K V 60 Hz. USA For gres, ceramic, glass, tiles, marble and other materials. Diamond Blade Ø 10 included (250 mm.). With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut capability and foldable head for miter cuts. With guide to allow repetitive cuts. With table 21 x 26 (55 x 68 cm.). Direct drive. Direct drive. For mitre cutting very tough materials, we recommend the use of the special slides (Ref.57991). Roller table extension (Ref ). Special slides for mitre cutting (Ref ). * Using plunge cut effect. DS-250-EP 2875 *26 18 x 18 2 / 3 Ø x 21 x Lb Lb (*65 cm.) (45x45 cm.) (70 / 92 mm.) (250 mm.) (110x55x130 cm.) (67 kg.) (75 kg.)
13 Electric saws Diamant DS and DS-L DS-250 / FC / L Ceramic fixing accessory. Reinforced bars. (Photo DS-250-L) Stop for repeated cuts. DIAMANT DS 156 DIAMANT DS HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. AUSTR V 50 Hz. UK V 50 Hz V 60 Hz V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA DIAMANT DS-250-FC ( With slab holder). 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. AUSTR V 50 Hz. UK V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA PRODUCT ONLY WITH SPECIAL ORDERS. INQUIRE FOR AVAILABILITY DIAMANT DS-250-L 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. UK V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA V 50 Hz. AUSTR For gres, ceramic, glass, tiles, marble and other materials. With thermic and overload security switches. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 10 (250 mm.) not included. Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. Ceramic fixing accessory (included with DS-250-L and DS-250-FC) With large table 21 x 35 (59 x 90 cm.) in DS-250 and 33 x 51 (86 x 130 cm.) in DS-250-L. Adjustable accessories (see page 164) Roller table extension (Ref ). Special miter joint decks (Ref ). Ceramic fixing accessory for DS-250 (Ref ). DS x26 2 Ø x 25 x Lb 280 Lb (92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (112,5 kg.) (127 kg.) DS-250-FC x26 2 Ø x25 x Lb Lb (92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (114,5 kg.) (129 kg.) DS-250-L x36 2 Ø x33 x Lb Lb (130 cm.) (92x92 cm.) (50 mm.) (250 mm.) (193x87x123 cm.) (172,5 kg.) (226 kg.)
14 Electric saws Diamant DS and DS-L DS-300 / FC / L Ceramic fixing accessory. Foldable head for miter cutting. Plunge cut micro-adjustment. (Photo DS-300-L) DIAMANT DS DIAMANT DS HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH* V 60 Hz V 50 Hz V 60 Hz V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA V 50 Hz V 60 Hz DIAMANT DS-300-FC ( With slab holder). 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. AUSTR V 50 Hz. UK V 60 Hz V 50 Hz V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA PRODUCT ONLY WITH SPECIAL ORDERS. INQUIRE FOR AVAILABILITY DIAMANT DS-300-L 3 HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH* V 60 Hz V 50 Hz V 60 Hz For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 12 (300 mm.) and 14 (350 mm.) not included. Motor assembly mounted on sliding bearings. Vertically adjustable and foldable mobile head for miter cuts. Ceramic fixing accessory (included with DS-300-L and DS-300-FC). * Using plunge cut effect. ** Useful cutting height: 1 stroke 3 15 /16 (100 mm.) with Ø 14 (350 mm.) disc. 220 V 60 Hz. USA V 50 Hz. UK V 60 Hz. USA V 50 Hz. AUSTR V 50 Hz V 60 Hz With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. With large table 23 x 33 (59 x 86 cm.) in DS-300 and 33 x 51 ( 86 x 130 cm.) in DS-300-L. Adjustable accessories: (see page 164) Roller table extension (Ref ). Special miter joint decks (Ref ). Ceramic fixing accessory for DS-300 (Ref ). DS *35 24 x 24 3 / x 25 x Lb 302 Lb (*88 cm.) (62x62 cm.) (75 / 140 mm.) ( mm.) (145x64x140 cm.) (113,5 kg.) (137 kg.) DS-300-FC 2800 *35 24 x 24 3 / x 25 x Lb Lb (*88 cm.) (62x62 cm.) (75 / 140 mm.) ( mm.) (145x64x140 cm.) (115,5 kg.) (139 kg.) DS-300-L 2800 *51 36 x 36 3 / x 33 x Lb Lb (*130 cm.) (92x92 cm.) (75 / 140 mm.) ( mm.) (193x87x140 cm.) (173,5 kg.) (240 kg.)
15 Electric saws Diamant DX and DX-L DX-350 Foldable head for miter cutting. Upper motor. (Photo DX-350) Plunge cut. DIAMANT DX 158 DIAMANT DX HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH* V 50 Hz V 60 Hz V 60 Hz V 50 Hz. UK V 60 Hz. USA V 50 Hz V 60 Hz DIAMANT DX-350-L 3 HP-2.2 kw 2.6 HP-1.9 kw* 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH* V 60 Hz V 50 Hz. UK V 60 Hz. USA Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz V 60 Hz V 50 Hz V 60 Hz For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload security switches. Water pump refrigeration of blade (with flow control valve). Ø 14 (350 mm.) diamond blade not included. Motor assembly mounted on sliding bearings. Vertically adjustable and foldable mobile head for miter cuts. With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. Ceramic fixing accessory included in DX-350-L. Electric cable: 4.9 ft. (1,5 m.) With table 23 x 33 (59 x 86 cm.) in DX-350 and 33 x 51 (86 x 130 cm.) in DX-350-L. Belt transmission. Special DX decks for 5 1 /8 (130 mm.) high cutting in one stroke. Roller table extension (Ref ). Ceramic fixing accessory for DX-350 (Ref ). * Using plunge cut effect. DX *32 23 x 23 4 / x25 x Lb Lb (*82,5 cm.) (58x58 cm.) (111 / 232 mm.) (350 mm.) (145x64x151 cm.) (130,5 kg.) (145 kg.) DX-350-L 2800 *49 35 x 35 4 / x34 x Lb 582 Lb (*124,5 cm.) (88x88 cm.) (111 / 232 mm.) (350 mm.) (193x87x151 cm.) (190 kg.) (264 kg.)
16 Electric saws Diamant DT Lateral Stop DT-250 Foldable head for miter cutting. Belt drive. DIAMANT DT DIAMANT DT HP-1.5 kw 1.5 HP-1.1 kw* 1 **1 230 V 50 Hz V 50 Hz. UK V 50 Hz. CH V 50 Hz. AUSTR V 60 Hz V 50 Hz. U.K.* V 60 Hz. USA* V 50 Hz. DK For ceramic tiles and all types of building materials such as brick, facebrick, firebrick, etc. With thermic and overload security switches. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 10 (250 mm.) not included. Vertically mobile head with plunge cut and fold-away for miter cuts. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With table 17 x 15 ( 44 x 40 cm.). Belt transmission. The saw allows a 10 1 /2 (26 cm.) tile to be cut in half. Adjustable accessories: (see page 164) Support table (Ref ). * Using plunge cut effect. DT *21 14 x 14 3 / x21 x Lb Lb (*52 cm.) (37x37 cm.) (60 / 110 mm.) (250 mm.) (85x54x61 cm.) (54 kg.) (69 kg.)
17 Electric saws Diamant DR-EN DR-300-EN Stop for repeated cuts. Foldable head for miter cutting. Adjustable plunge cut. DIAMANT DR-EN 160 DIAMANT DR-300-EN 230 V 50 Hz HP-2.2 kw 230 V 50 Hz. UK HP-1.9 kw* 230 V 50 Hz. CH* Three-phase motor 4 HP-3 kw 1 1** 230 V 50 Hz V 60 Hz V 50 Hz. AUSTR V 60 Hz V 50 Hz. UK V 60 Hz. USA V 50 Hz V 60 Hz For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). diamond Blade Ø 12 (300 mm.) 14 (350 mm.) not included. Vertically mobile head with plunge cut capability and foldable head for miter cuts. Electric cable: 4.9 ft. (1,5 m.) With guide to allow repetitive cuts. Large sliding table 22 7 /8 x 20 2 /3 (58 x 52 cm.) mounted on sealed bearings. Direct drive. The saw allows a 12 1 /2 (31,5cm.) tile to be cut in half Adjustable accessories (see page 164 DR-EN 2800 *30 17 x /8 / x 27 x Lb Lb. (*76 cm.) (44x44 cm.) (92 / 150 mm.) ( mm.) (111x71x130 cm.) (77 kg.) (100 kg.) * Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5 /8 (117 mm) with Ø 14 (350 mm) disc.
18 Electric saws Diamant DR DR-300 Stop for repeated cuts. Foldable head for miter cutting. Adjustable plunge cut. DIAMANT DR DIAMANT DR HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 1** 230 V 50 Hz V 50 Hz. AUSTR V 50 Hz. UK V 50 Hz. CH* V 50 Hz V 60 Hz V 60 Hz V 50 Hz. UK V 60 Hz. USA V 50 Hz. DK V 50 Hz V 60 Hz For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). diamond Blade Ø 12 (300 mm.) 14 (350 mm.) not included. Vertically mobile head with plunge cut capability and foldable head for miter cuts. Electric cable: 4.9 ft. (1,5 m.) With guide to allow repetitive cuts. Large sliding table 22 7 /8 x 20 2 /3 (58 x 52 cm.) mounted on sealed bearings. Direct drive. The saw allows a 12 1 /2 (31,5cm.) tile to be cut in half DR *30 17 x /8 / x 27 x Lb Lb. (*76 cm.) (44x44 cm.) (92 / 150 mm.) ( mm.) (111x71x130 cm.) (83.4 kg.) (106 kg.) * Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5 /8 (117 mm) with Ø 14 (350 mm) disc.
19 162 Electric Saws
20 Electric Saws 163
21 Accessories for Electric Saws Ref Ref Ref Ref /534 Ref /91/54939 Ref /46 Ref /48 FOR ELECTRIC SAWS CERAMIC BLOCK For cleaning of diamond blades. 164 DIAGONAL CUTTING GUIDES Fixed 45º. Plastic to 90º adjustable guide. Metallic For portable saws D-200 and ND-180/200/300. WATER TRAY For ND-180-E/180/ Dimensions: 22 x 21 x 1 (56 x 55 x 2,5 cm.). WATER TRAY For ND Dimensions: 27 x 25 x 1 (71 x 65 x 2,5 cm.). SET OF DECK SPECIAL FOR MITRING CUTS Special set of deck for mitering cuts. To create cuts in mitering judge accuracy For machines DS-230-LPS, DS-250-EP, DW-LPS and DW-N. SET OF DECK SPECIAL FOR MITRING CUTS Special set of deck for mitering cuts. To create cuts in mitering judge accuracy. For machines DS-250/250-L and DS-300/300-L. DX SPECIAL DECKS Small diameter decks connectable to DX-350 and DX-350-L for making higher cuts. DS-250 CERAMIC FIXING FOR MACHINES BEFORE 2003 (includes table and securing) FOR MACHINES AFTER 2003 (only includes securing) DS-250 mounting for ceramic fixing and perfect measurement of the whole length of the cut. Guarantees a perfect finish with no size error. Indicate reference and series number of tile cutter before making order. DS-300 AND DX-350 CERAMIC FIXING FOR MACHINES BEFORE 2003 (includes table and securing) FOR MACHINES AFTER 2003 (only includes securing) DS-300 and DX-350 mounting for ceramic fixing and perfect measurement of the whole length of the cut. Guarantees a perfect finish with no size error. Indicate reference and series number of tile cutter before making order.
22 Accessories for Electric Saws Ref Ref Ref B-100 B-101 SPARE PARTS FOR ELECTRIC SAWS WATER PUMP B101 1 For DIAMANT D, DR, DS, DT and DX and for the electric cleaner SPOMATIC. 230 V 50 Hz V 60 Hz V 50 Hz V 60 Hz WATER PUMP B100 1 For DIAMANT DU and DW. 230 V 50 Hz V 60 Hz V 50 Hz V 60 Hz SUPPORT TABLE New reinforced structure for greater stability. For DT-250, DU-200/200-L and DW-200/200-L. Dimensions: 26 x 20 x 28 (67 x 53 x 72 cm.). ROLLER TABLE EXTENSION For electric cutter DS-230-LPS, DS-250/FC/L, DS-300/FC/L, DU-200/200-L, DW-200/L/LP/LPS, DW-250-LPS and DX-350/350-L. With rollers to simplify movement of the tiles. With adjustable fold-away legs. Dimensions: 20 x 22 x 3 (51 x 56 x 8 cm.).. For other accessories and any replacements, verify in the exploding for each machine.
Tile saws - Masonry saws - Block saws
Tile saws - Masonry saws - Block saws www.goelz.de Tile saws NEW TS200/250 Professional tile cutting machines adjustable cutting length cutting head adjustable up to 45 (Jolly cutting) diamond blade Ø
More informationAccessories for GF and RA machines
Accessories for GF and RA machines A BRAND OF ITW ORBITAL CUTTING & WELDING 21 Orbital cutting & beveling machines for high-purity process piping Accessories for GF and RA machines Saw blade lubricant
More informationSeries description: Wilo-Drain VC
Series description: Wilo-Drain VC 0H[m] 18 16 14 12 10 8 6 4 2 VC 32/10 Wilo-Drain VC 0 2 4 6 8 10 12 VC 40/20 Q[m³/h] Design Vertically-mounted drainage pump (pedestal pump with IE2 motor) Application
More informationULTRALOW TEMPERATURE FREEZERS -86 C
ULTRALOW TEMPERATURE FREEZERS -86 C NUAIRE MEANS ENVIRONMENTALLY SAFE Laboratory professionals the world over depend on NuAire for safe, reliable laboratory equipment that lasts longer and performs better
More informationImmersion Pumps HCT (High Chem) sealless
Immersion Pumps HCT (High Chem) sealless 1-6004-US Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More informationPortable Filter Cart Type SPFC
STAUFF Mobile Filter Units Portable Filter Cart Type SPFC Product Description The STAUFF Portable Filter Cart (SPFC) is a very complete and practical unit capable of off-line filtration, filling or emptying
More information2.9 Sigma/ 2 Plunger Metering Pumps
.9 Sigma/ Plunger Metering Pumps.9Sigma/ Plunger Metering Pumps.9.1 Sigma Plunger Metering Pumps The Sigma/ motor plunger metering pump has a high-strength inner metal housing for those component parts
More informationVM GATE VALVE GRINDING & LAPPING MACHINE
VM1150-1200 GATE VALVE GRINDING & LAPPING MACHINE 2014 04 VM1150-1200 Lightweight for easy handling and installation. Powerful Wide working range: nominal diameter of 1.5-48 inches (40-1200 mm). Submersion
More informationData sheet: Wilo-Drain TP 65 E 114/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump curves Wilo-Drain TP 65 E - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 15.0 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H
More information(1,1) -1- X-HTA-1000.indd 3/13/2009 1:26:09 PM ABOVE AND BEYOND HONING. HTA Series HORIZONTAL TUBE HONING SYSTEMS
(1,1) -1- X-HTA-1000.indd 3/13/2009 1:26:09 PM ABOVE AND BEYOND HONING HTA Series HORIZONTAL TUBE HONING SYSTEMS (1,1) -2-3- X-HTA-1000.indd 3/13/2009 1:26:19 PM SUNNEN S NEW HTA TUBE HONES PACK HIGH-END
More informationAccessories K6..-. / K9..-. / KC6..-. / KC9..-. ACCESSORIES INCLUDED OPTIONAL ACCESSORIES OTHER OPTIONAL ACCESSORIES
Accessories K6..-. / K9..-. / KC6..-. / KC9..-. ACCESSORIES INCLUDED COLLET COLLET CNOMO SERIES 200 1 CNOMO collet ø 6 mm 615 526 049 0 2 Series 200 resilient collet, ø 5.55 to 6.35 mm (1/4") 615 526 063
More informationSupport Frame STB Technical Instruction Manual
Support Frame STB Technical Instruction Manual Fig. 2.1: Support frame STB 450 Fig. 2.2: Support frame STB 300 Fig. 2.3: Brace bracket SK 150 Product Characteristics The support frames are mainly used
More informationINSTRUCTION MANUAL [J] [E] [C] [G] [B] [I] [H] [D] [F] [A] 0 INTRODUCTION 1 RECOMMENDATIONS 2 ACCESSORIES INCLUDED
0 INTRODUCTION Video Lift is an electro-mechanical device which, once installed in the ceiling, allows vertical movement (ceiling floor ceiling) for loads of up to 19 Kg and with maximum runs of 1 metre
More informationSeries description: Wilo-Sub TWU 3 HS
Series description: Wilo-Sub TWU 3 HS Design Submersible pump, multistage Application For private water supply from boreholes, wells and rainwater storage tanks For domestic water supply, sprinkling and
More informationPRIMEROYAL Series. Metering Pump. Model PN
PRIMEROYAL Series Metering Pump Model PN The PRIMEROYAL PN metering pumps are versatile, reliable pumps that consistently and accurately inject chemicals. The pumps field-proven design enables precise
More informationSplit System Air Conditioner
Residential & Light Commercial HVAC Split System Air Conditioner 1 R-410A, 1 2 thru 5 Tons 208/230 Volt, 1-Phase, 60 Hz Performance: Efficiency rating of 13 SEER Cooling capacities from 1 1 2 to 5 tons
More informationOptical Cryostat - Economy
The CS202*E-DMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system is well suited for optical, electrical, and magnetic
More informationTeSys circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-ME GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping
More informationQuickSpecs. Models RB146AA#ABA Standard Configuration RB146AT#ABA Promotional Part Number (SmartBuy) HP L5006tm 15-inch LCD Touchscreen Monitor
Overview 1. 2. 3. 4. 5. Power: Turns the unit on and off. Select: Selects the adjustment items from the on-screen display (OSD) menus. Arrow down: Enter brightness adjustment, decrease value of the adjustment
More informationllen-bradley 194R-HM4-NFPA3
Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources
More informationA wireless turntable for new way of enjoying vinyl records
Bluetooth Turntable TN-280BT 2-speed Analog Turntable with Phono EQ and Bluetooth A wireless turntable for new way of enjoying vinyl records Main Features 2-speed Belt-drive turntable Built-in MM phono
More informationLINEAR ACTUATORS. Type S / SH 95, S / SH 80, S / SH 71, S / SH 56
LINEAR ACTUATORS Type S / SH 95, S / SH 80, S / SH 71, S / SH 56 moving As one of the leading manufacturers of electrical and electronic drive components and systems we offer you a wide product range for
More informationTENSIONED ELPRO CONCEPT Motorized projection screen for wall or ceiling installations
Motorized projection screen for wall or ceiling installations Watch the video: Product specifications: Electrically operated projection screen 230 volt (50Hz) with a usage of no more than 0.53 Ampere (121.9
More informationVM2350,2500,2600 GLOBE VALVE GRINDING & LAPPING MACHINE
VM2350,2500,2600 GLOBE VALVE GRINDING & LAPPING MACHINE 2014 04 VM 2350-2600 Powerful, rigid, high performance machine with easy setup and handling. Quick and Easy Setup Quickly change between electric
More informationRevision 3.0 Parts List Salvador 1~, 3~
Revision 3.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data
More informationMechanical flow switch for On/Off control
Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationAll-Glass Sliding-System SF20
Profile system All-glass sliding system Bottom loaded/running construction Option of flush or weathered bottom track The flush bottom track is particularly suitable for use in barrier-free dwellings according
More informationSeries: BPV, BPLHS. Vertical Multi-Stage Family Curve, 3500 RPM - 60Hz. Family Curves. Vertical Multi-Stage Pumps.
Series:, BPLHS Family Curves Vertical Multi-Stage Family Curve, 3500 RPM - 60Hz. 1 5/11 Series: General Information The Burks Series is made up of pumps with all wetted parts made of stainless steel. For
More informationUSER MANUAL. WARNING Read the instructions before using the machine. EN (Original Instruction) / 1704
USER MANUAL European Models American Models 60/100/120 3/4/5 24/40/48 3/4/5 Read the instructions before using the machine. EN (Original Instruction) 9124097 / 1704 KEEP THIS USER MANUAL FOR FUTURE USE
More informationData sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V)
Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V) Pump curves Wilo-Drain TP 50 E - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 26 m 3 /h Optimal delivery head H opt 5.0 m
More informationLPUM - Local Power Unit General. Product Data Sheet January 2013 SD E06
LPUM - Local Power Unit General Product Data Sheet January 2013 SD 1520-0E06 TM LPUM - Local Power Unit January 2013 Description The LPUM - (Local Power Unit) - is an integrated electro-hydraulic system
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationImmersion Pumps HCT (High Chem) sealless EN
Immersion Pumps HCT (High Chem) sealless 1 6004 EN Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More informationFirst introduced in 2005, Deployable Rapid Assembly Shelter (DRASH) Deployable Command and Control Equipment (DC2E) was developed to solve the
S First introduced in 2005, Deployable Rapid Assembly Shelter (DRASH) Deployable Command and Control Equipment (DC2E) was developed to solve the information management problems facing today s incident
More informationSeries. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate V3. Coolant systems are warranted for 1 year, parts and labor.
Series Issued Oct. 2010 Index No. AY/7.2 Coolmate Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.390 Mega Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data
More information883 COMBI FLIP- FLOW SCREEN
883 SPALECK 883 COMBI FLIP- FLOW SCREEN C+D / C+I 883 SPALECK Powerunit Tier 3 / Stage 3A Caterpillar C4.4 ATAAC - 4 cylinder diesel The NEW Finlay 883 Spaleck is the ultimate in mobile screening and separation
More informationHotplate/Stirrers. Performance, Selection, Control
Hotplate/Stirrers Performance, Selection, Control Professional Hotplates, Stirrers and Hotplate/Stirrers Display for speed, temperature, and time External temperature probe Electronic stir brake Safety
More informationParts List _2.1. Flygt /.890
Parts List 886754_2. Flygt 3069 3069.70/.890 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationLC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil
Product datasheet Characteristics LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationRoof-mounted Blue e+ cooling unit Integration solution VX25
Roof-mounted Blue e+ cooling unit Integration solution VX25 Ease of use Intuitive operation via touch display Integration solution VX25 and Blue e+ Cooling unit with 1.3 kw and Blue e+ technology with
More informationRevision 2.0 Parts List Minette 1~, 3~
Revision.0 www.grindex.com Parts List 80.7 Minette ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationWelded construction 50kg, 100% extension drawers Excellent value for money 10 year extended guarantee
bott Mobile Welded construction 50kg, 100% extension drawers Excellent value for money 10 year extended guarantee 196 www.bottltd.co.uk Mobile Features & Benefits Page 198 The details that make bott s
More informationLC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 80 A V AC 50/60 Hz coil
Product datasheet Characteristics LC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationDATA SHEET Panorama Rudder Indicator, TRI-2
DATA SHEET Panorama Rudder Indicator, TRI-2 Class 1 accuracy on CAN version Readable from up to 5 metres Single and dual CAN or analogue interface LED illumination DEIF A/S Frisenborgvej 33 DK-7800 Skive
More informationFluid Cooling P-BAR b Industrial BOL Series
Fluid Cooling P-BAR b Industrial BOL Series 10 BRAZED ALUMINUM CONSTRUCTION Performance Notes Bar and plate brazed aluminum core Provides the best heat transfer per given envelope size while minimizing
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationSeries: BPV, BPLHS Family Curves
Series: BPV, BPLHS Family Curves Vertical Multi-Stage Family Curve, 3500 RPM - 60Hz. 5 /1 Series: BPV General Information The Burks BPV Series is made up of pumps with all wetted parts made of stainless
More informationAUDIO AND VIDEO. FM Radio Trainer. LCD TV Trainer. LCD Television Trainer with Student Examination S/W. Dish Receiver Trainer
AUDIO AND VIDEO 20 21 22 23 24 25 26 FM Radio Trainer LCD TV Trainer LCD Television Trainer with Student Examination S/W Dish Receiver Trainer Dish Receiver Trainer with Television Combined trainer of
More informationTHE CABLE TRAY SYSTEM
C A B L E S A N I T A T I O N C A B L E T R A Y S Y S T E M S THE CABLE TRAY SYSTEM The SILTEC cable tray system is a product, developed for optimum functionality and with focus on simplicity and accessibility,
More informationVM GATE VALVE GRINDING & LAPPING MACHINE
VM1350-1600 GATE VALVE GRINDING & LAPPING MACHINE 2014 04 VM1350-1600 Powerful, rigid design with easy set up and handling. Powerful Wide working range: nominal diameter of 1.5-48 inches (40-1200 mm).
More informationLC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil
Product data sheet Characteristics LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationSRM W 15" Portable Powered Subwoofer
SRM1550 FEATURES: 1200W of power paired with a 15" custom high-output woofer with 3" voice coil delivers gig-level volumes with room to spare Same cosmetic design as the renowned SRM450 Road-ready Built-Like-A-Tank
More information2178-L/S Series Fiber Optic Splice Case with Gasket
2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents
More informationLC1D32P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A V AC 50/60 Hz coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D12P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A V AC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationRevision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~
Revision 3.0 www.grindex.com Parts List 80.60 Minex ~ 80.7 Minex Lite, Minex 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included...
More informationVM1700-VM1900 GATE VALVE GRINDING & LAPPING MACHINE
VM1700-VM1900 GATE VALVE GRINDING & LAPPING MACHINE 2014 04 VM1700-1900 Powerful, rigid design with easy set up and handling. Powerful Wide working range: nominal diameter of 1.5-48 inches (40-1200 mm).
More informationParts List _2.1. Flygt /.190
Parts List 886747_2. Flygt 3069 3069.60/.90 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationDewatering. Series description Wilo-Drain STS 65. Submersible sewage pump
Series description Wilo-Drain STS 65 Thermal winding monitoring Max. fluid temperature: 3-40 C Cable length: 10 m Free ball passage: 65 mm Max. immersion depth: 10 m Equipment/function Thermal motor monitoring
More informationSupport Frame STB Assembly and Operating Instructions
Support Frame STB Assembly and Operating Instructions Fig. 2.1 Support frame STB 450 Fig. 2.2 Support frame STB 300 Fig. 2.3 Brace bracket SK 150 Product features The support frames are mainly used for
More informationLuxurious turntable inherits modern technology and contemporary design.
Analog Turntable TN-350 Analog Turntable with Phono EQ Luxurious turntable inherits modern technology and contemporary design. Main Features Manual Belt-drive Turntable supporting 33/45rpm Heavy MDF cabinet
More informationDREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE
DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION 1.2 - ORIGINAL ASSEMBLY GUIDE It is important to read this assembly guide before using the Dreamoc Diamond, and to follow advices and instructions on safety,
More informationAUDIO AND VIDEO. FM Radio Trainer. Dish Receiver Trainer. LCD Television Trainer with Student Examination S/W. LCD TV Trainer
AUDIO AND VIDEO 20 21 22 23 24 25 26 FM Radio Trainer Dish Receiver Trainer LCD Television Trainer with Student Examination S/W LCD TV Trainer Dish Receiver Trainer with Television Combined Trainer of
More informationLC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil
Product data sheet Characteristics LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationAll-Glass Sliding-System SF20
Profile system All-glass sliding system Bottom loaded/running construction Option of flush or weathered bottom track The flush bottom track is particularly suitable for use in barrier-free dwellings according
More informationCENTRAL BLOWER COMPANY 211 S. 7th Ave. City of Industry, CA (626) Fax (626)
CENTRAL BLOWER COMPANY 211 S. 7th Ave. City of Industry, CA 91746 (626) 330-3182 Fax (626) 330-9406 www.centralblower.com CATALOG REF-11 OCTOBER 2011 Series RE Scoop with Grease Trough Sealed to blower
More informationAS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.400 Mega Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 The data plate...3 Exploded Views...4 Drive
More informationTECHNICAL GUIDE. TOUGH GUN ThruArm G1 Series Robotic MIG Guns for FANUC Robots 100iC, 100iC-12, 100iC-6L, 100iC-7L, 120iC, 120iC-10L, 120iC-12L
TECHNICAL GUIDE TOUGH GUN ThruArm G1 Series Robotic MIG Guns for FANUC Robots 100iC, 100iC-12, 100iC-6L, 100iC-7L, 120iC, 120iC-10L, 120iC-12L INSTALLATION MAINTENANCE TECHNICAL DATA OPTIONS EXPLODED VIEW
More informationCollator series 300/400, 310B Spare parts list
Collator series 300/400, 30B Spare parts list AUGUST 997 Part # 9049 USER INFORMATION T0703 This Spare part list is devided into one Series 300/400 section, one 30 B section and one Paper feeder section.
More informationWheelProbe2. Simplicity Capability Reliability
WheelProbe2 Simplicity Capability Reliability From the innovators who brought the idea to the market over a decade ago, Sonatest is proud to extend its WheelProbe family by introducing the New Generation
More informationNEPTUNE PROJECTION SCREEN PRO-LINE MANUAL SCREEN NEPTUNE PRO-LINE MNAUAL SCREEN SPRING ROLL LOCKING SYSTEM DEFINITE ASPECT UNIQUE APPEARANCE DURABLE
NEPTUNE PRO-LINE MANUAL SCREEN QS Neptune pro-line manual screen combines comfortable viewing and simplicity in use. It satisfies the most exacting viewers with clear black border for definite aspect.
More informationTFRH Hygienic RTD temperature sensor. CombiTemp TM
Main features Pt100 sensor element, 2- or 4-wire uilt in graphical display, CombiView TM DFON optional Head mounted transmitter, FlexTop type 22xx HART, PA ATEX 3-A, FDA Programmable by touch screen Easy
More informationTeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40
Characteristics Type of contactor LC- LC- LC- LC- LC-D & D09 D8 D2 D38 D40 D0 D9 LC-D0 DT20 & DT2 DT32 & DT40 Environment Rated insulation voltage (Ui) Conforming to IEC 947-4-, overvoltage category III,
More informationOptical Cryostat - Omniplex TM
The Omniplex TM, DE204*F-FMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-204 cryocooler. The ARS Omniplex TM systems features large optical access and quick sample change. The
More informationWheelProbe 2. Innovation, Flexibility, Performance
WheelProbe 2 Innovation, Flexibility, Performance Composite inspection WP2 allows you to build the most efficient solutions for scanning large areas of composite. As the best alternative to immersion inspection
More informationCompact Vacuum Systems
Compact Vacuum Systems Substantial savings can be realised by installing a compact central vacuum system from Dustcontrol. For example, all grinders and finishing tools in an production facility are equipped
More informationLC1D150B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A - 24 V AC 50/60 Hz coil
Product data sheet Characteristics LC1D150B7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationCorsair CX650M Semi-Modular ATX Power. Supply. Msystems Ltd.
Product Full Name Product Title Part Number/ UPC CORSAIR Semi-Modular ATX Power Supply See Below (100-Word Product Description, Preferred Copy) CX Series Modular power supply units are an excellent choice
More information1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control
IEC Contactors and Starters. XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and
More informationLC1D12B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V AC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D65AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A V AC 50/60 Hz coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D50AFE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil
Product data sheet Characteristics LC1D50AFE7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationCONCRETE CONSOLIDATION
CONCRETE CONSOLIDATION Pneutrol International Ltd, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.pneutrolspares.com, sales@pneutrol.com, Tel: +44 (0) 28 9448 1800 SINCE 1961 Our history in CONCRETE
More informationSPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
More informationCINEDOMUS PROJECTION SCREENS with electrical command, varnished aluminium case
CINEDOMUS PROJECTION SCREENS with electrical command, varnished aluminium case CINEDOMUS is the new range of professional electrical screens, developed and designed mainly for domestic use in home cinemas,
More informationMagnetic Stirrers Magnetic Stirr
Magnetic Stirrers Heidolph Magnetic Stirrers Product Line features 0 0 0 D 1 1 K 1 K8 HG 1 HG 1 K 2 2 S8 4 safety P/N 503-000-00 504-00011-00 504-03010-00 504-00-00 504-10-00 504-10108-00 504-40000-00
More informationRevision 1.0 Parts List Mini
Revision.0 www.grindex.com Parts List 822.2 Mini Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 Products included... 3 The data plate...3
More informationGS-HYDRO END FORMING MACHINES
GS-HYDRO END FORMING MACHINES Main index Reshaping machine... 4 Pre-assembly machines... 5 Deburring machines... 6 Tube cutting machines... 7 Cleaning system... 8 3 Reshaping machine M-WF 385Xplus Walform
More informationModel DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL
More informationRoots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A
3.1 Vacuum generation / / Convection cooled OktaLine Okta 500 with a pumping speed of 280 to 840 m 3 /h: High-performance Roots pump with a pumping speed of 280 to 840 m 3 /h With 3-phase motor, IE2 No
More informationQuickSpecs. HP VH27 27-inch Monitor. Overview. 1. Menu 3. Plus ( + ) 5. Power 2. Minus ( - ) 4. Exit
Overview 1. Menu 3. Plus ( + ) 5. Power 2. Minus ( - ) 4. Exit 6. Security lock slot 8. DisplayPort TM 7. Power connector 9. HDMI 10. VGA NA Version 2 April 5, 2017 Page 1 Models: 2KZ36A - 3PL18A Panel
More informationGRUNDFOS alldos product information. The solution for complex dosing tasks
GRUNDFOS alldos product information The solution for complex dosing tasks Measurements Measurements a h d Electric actuator b Pneumatic actuator g e Ø 9mm k f i m 1 m 2 k j c n l 1 l 2 DMH model Measurements
More informationData Sheet Definite Purpose Contactors Ex9CK Series
Data Sheet Ex9CK Series Ex9CK40B0 Ex9CKA10 na.noarkelectric.com NOARK Ex9CK Series Features Ex9CK Series DP Contactors provide high performance with both flexibility and reliability. They are designed
More informationLinatron - M9 & M9A. Modular high-energy X-ray source. 2.0 Performance
The Linatron -M is a modular system. The control console, modulator, and RF unit are common to all model configurations. Only the X-ray head changes to match the application. The Linatron - M is designed
More informationQuickSpecs. Models RB146AA#ABA Standard Configuration RB146AT#ABA Promotional Part Number (SmartBuy)
Overview 1. 2. 3. 4. 5. Power: Turns the unit on and off. Select: Selects the adjustment items from the on-screen display (OSD) menus. Arrow down: Enter brightness adjustment, decrease value of the adjustment
More informationService manual Cantano W/T
Service manual Cantano W/T Here you will see everything that should be included in your Cantano package 2 Prerequisite: Placement and leveling of the drive 5 Setting up the motor and connecting it to the
More information