Hilti CP678 Cable Coating

Size: px

Start display at page:

Download "Hilti CP678 Cable Coating"

Marsha Lloyd
6 years ago
Views:

1 Hilti CP678 Cable Coating Product Info. & Method Statement 2-4 Test Report - FM Approval Report No Warres No Warres No Government Letters Buildings Department Fire Services Department Architectural Services Dept. Country of Origin LEED Letter 30 BEAM Plus information 31 2 VOC Content Material Safety Data Sheet Job Reference 37 Customer Hotline Hong Kong Macau (Toll free) April 2016

Firestop Systems CP 678 cable coating Product Description Hilti CP 678 is a ready to use, water based, intumescent cable coating, which can be applied by brush or airless spray to prevent the

Also suitable for protecting against spread of flame on timber panels.

2 Firestop Systems CP 678 cable coating Product Description Hilti CP 678 is a ready to use, water based, intumescent cable coating, which can be applied by brush or airless spray to prevent the propagation of fires along internal electrical cables. Cables coated with CP 678 will exhibit increased protection in the event of a fire. Also suitable for protecting against spread of flame on timber panels. Area of Application: Cable British Standard BS 476 BS 476-6&7 FM APPROVED Product Features Water soluble, odourless and solvent free Rapid drying Remains flexible when dry Intumescent Free of fibres, or asbestos No derating effect on cables Compatible with the shealthing of electrical cables High yield, economical Contributed to LEED IEQ Credit 4.1 Low-Emitting Materials-Adhesives & Sealants Technical Data Color: White Content: 20 kg Consistency: Can be applied by paint brush or spray Application temperature: 5 C to 40 C Storage / transport temperature: 5 C to 25 C Application of second layer: After 2-4 hours Electric surface resistance: 1.1 x 10 6 (DIN VDE 0472 / 05.85) Temperature resistance: -30 C to 80 C (after cured) Coating thickness: 0.5 mm (IEC 332 Pt3) (Dry film) 1.6 mm (Factory Mutual) Shelf life after production: 18 months (stored in a dry place) Application Procedure Main Application Power plants (IEC 332 Pt3) Telecommunication complexes Industrial plants Petrochemical plants Paper mills Factories and production facilities Clean cables Mix coating Apply coating Consumption Guide Coverage On a flat surface coverage will be approx. 650gm per m2 (at 0.5mm DFT, dry film thickness). To reach a dry thickness of 1mm you need about mm wet thickness This means two coating steps. On cable bundles, & cable trays allow 1 to 1.5kg per m2 (at 0.5mm DFT, dry film thickness), depending on volume of cables, method of application, & wasteage (i.e. overspray). A larger cable tray of 1m length & 0.55m wide, with 3 cable bundles each of 10cm in diameter, coated once, needs ca. 4 litres of CP 678. Coated twice you need between 7-8 litres A smaller cable tray of 1m length & 0.35mm wide, with 3 cable bundles each of 10cm in diameter, coated once, needs ca-3 litres of CP 678. Coated twice you need ca.5 litres of CP 678. CP 678 cable coating Packaging Ordering Item No content (pcs) designation Cable coating 1 CP kg bucket 2 April 2016 Special Request 337 Customer Hotline: Hong Kong Macau (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) Hilti online:

2 Thoroughly mix CP 678, until it becomes workable for application. Any separated water in the container must also be mixed in. Note: do not add water!

3 Subject: Method Statement of CP 678 Material: CP 678 Cable coating Accessory: Nil Setting Operation 1 Clean the cables. The cables and cable supporting structures must be dry and free from dust, grease or oil, and installed in compliance with local building and electrical standards. 2 Thoroughly mix CP 678, until it becomes workable for application. Any separated water in the container must also be mixed in. Note: do not add water! 3a Coat the cable or bunched cables on all sides by an airless spray (with airless spray gun with recommended nozzle and 40 spray angle) Hilti (Hong Kong) Ltd Tower A Manulife Financial Centre 223 Wai Yip Street Kwun Tong Kowloon Hong Kong P I F April 2016

4 3b Coat the cable or bunched cables on all sides by a brush. Safety precautions: Keep out of reach of children Wear protective clothing, googles and gloves when installing Keep away from foodstuffs Particular danger of slipping on leaked / spilled product Ensure adequate ventilation 4 April

5 5 April 2016

6 6 April 2016

7 7 April 2016

8 8 April 2016

9 9 April 2016

10 10 April 2016

11 11 April 2016

12 12 April 2016

13 13 April 2016

14 14 April 2016

15 15 April 2016

16 16 April 2016

17 17 April 2016

18 18 April 2016

19 19 April 2016

20 20 April 2016

21 21 April 2016

22 22 April 2016

23 23 April 2016

24 24 April 2016

25 25 April 2016

26 26 April 2016

27 27 April 2016

28 28 April 2016

29 29 April 2016

30 30 April 2016

To whom it may concern Date: 22 nd April 2016 Dear Sir / Madam, Subject: Hilti Firestop Products non-cfc and Ozone Confirmation Referring to your enquiry about the captioned subject, please be

31 To whom it may concern Date: 22 nd April 2016 Dear Sir / Madam, Subject: Hilti Firestop Products non-cfc and Ozone Confirmation Referring to your enquiry about the captioned subject, please be advised that: Hilti firestop products, free of CFC, HCFC nor other ozone depletion elements. CFC, HCFC and ozone depletion elements were not used during the product process neither. Should you have further questions, please do not hesitate to contact our Technical Representatives or Customer Service Hotline at Yours sincerely, Andrew Lau Product Manger Hilti (Hong Kong) Ltd & 708A&B Tower A Manulife Financial Centre 223 Wai Yip Street Kwun Tong Kowloon Hong Kong P I F April 2016

32 88 Empire Drive St. Paul, Minnesota (651) fax (651) VOC Content Test Certificate October 26, 2009 Supplier: Hilti Entwicklungsgesellschaft mbh BU Chemicals Hiltistrasse Kaufering GERMANY Sample Description: Hilti CP 678 Date tested: July 20, 2009 Test Method: SCAQMD method Determination of Volatile Organic Compounds (VOC) in various materials as referenced by South Coast Air Quality Management District (SCAQMD) rule The values also comply with the requirements of EPA test method #24. Test Data: Legend Project Number Specification LEED 2009 (LEED 3.0) LEED 2.2 IEQ-4.1: Low-Emitting Materials Architectural Coating Non Flat Applications Green Building Council of Australia Green Star Office Design 3.0, IEQ-13 Green Star Office Design 2.0, IEQ-13 Green Star Office Interiors 1.1, IEQ-11 Architectural Coating Non Flat Applications; VOC Limit: 150 g/l Product Hilti CP 678 Product contains: 60 g/l of VOC William Welbes Vice President of Laboratory Operations Allen Noreen, Ph.D. Technical Director 32 April 2016

33 33 April 2016

34 34 April 2016

35 35 April 2016

36 36 April 2016

37 Date Project Name Contractor Consultant Engineer Product Name Application Sep-12 Sep-12 Aug-12 Aug-12 CLP Maintenance Term Contract CLP Substation Maintenance Project Hong Kong Electric Power Station A&A works Hong Kong Electric Power Station A&A works Apr-11 Airport Development ON WAY CONSTRUCTION CO LTD Firestop cable coating CP KG cable protection KUM SHING ENGINEERING CO LTD Firestop cable coating CP KG cable protection TAI KEE ENGINEERING CO Firestop cable coating CP KG cable protection SANKO SETSUBI CO LTD Firestop cable coating CP KG cable protection ATAL BUILDING SERVICES ENGINEERING MOTT MACDONALD HONG KONG LTD Firestop cable coating CP KG cable protection 37 April 2016

Model ED 400 Drying and heating chambers Classic.Line with natural convection

Model ED 400 Drying and heating chambers Classic.Line with natural convection BENEFITS Uniform drying conditions thanks to APT.line technology Identical test conditions throughout the chamber interior