SC Type Fiber Optic Connectors
|
|
|
- Nathan Hunt
- 6 years ago
- Views:
Transcription
1 SC Type Fiber Optic Connectors HSC Series Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F4 type fiber optic connectors) IEC Plugs with strain relief boot Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical bend direction. The color of the boot identify the type of polishing: : polishing Light purple: Advanced (Ad) polishing Green: Angled polishing (A) Other colors are also possible. 3. Zirconia Split Sleeve Adapter Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule. 4. Duplex SC Type: Rigid Type Available in following types; H type 8.5 mm spacing between the fibers, for high density applications. F type 12.7 mm spacing between the fibers, low profile, for LAN applications. Refer to page 3 for further information. 5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards Floating mechanism with Duplex SC plug. It is also fully compatible with the HSCF fixed type. 6. Simplified Plugs and Receptacles. Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection. Refer to page 43 for further information. Applications LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other applications requiring reliable fiber optic connections. 27
2 Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C Optical Characteristics Item Test Method (IEC 613) Specifications (SM) Wavelength 131nm (LD).5dB max. (, Ad, A) Insertion Loss (GI) Wavelength 131nm (LED).3dB max. () (SM) 22dB min. () 4dB min. (Ad) Return Loss Wavelength 131nm (LD) 6dB min. (A) (GI) 22dB min. () Mechanical Characteristics Environmental Characteristics Engagement and Separation /force Ferrule withdrawal force Measured with corresponding connector. Extract zirconia gauge 2.4 ±.5 mm dia Copper alloy split sleeve 2N to 5.N from split sleeve. Zirconia split sleeve 2N to 3.N Cable retention (Straight pull) 8N tensile load for one minute. Durability (cycles, mating/un-mating) 1 times Vibration Frequency: 1 to 55 Hz, single amplitude of.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 81 m/s 2, 6 ms duration, sin half-wave waveform, 1 cycles in each of the 3 axis. Humidity -1 C to 65 C, humidity: % to 6% (Temperature/ humidity- cycles) 2 cycles Simplex plug Duplex plug 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, dislocation of clamp or cable. Change of temperature -4 C to +75 C 42 cycles (Complies with Telcordia standard GR-326-CORE) Dry heat 6 hours at 85 C Cold 6 hours at -25 C Salt mist 48 hours in a 5% concentration of salt mist No significant corrosion. Engagement force: 1.6 N max. Separation force: 1.6 N max. Engagement force: 3 N max. Separation force: 3 N max. 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, cracks or part dislocation. Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing 4-position adapter housing 5-position adapter housing Receptacle housing Attenuator housing Split sleeve Dust cap Material Synthetic resin Stainless Steel Zirconia Synthetic resin or Zinc alloy Synthetic resin Synthetic resin Zinc alloy Zinc alloy Zirconia or copper alloy Synthetic resin 28
3 Function diagram Simplex type SC type plug housing Strain relief type (For Cable Diameter: 2 mm & 3mm) HSC-PH2-E1,E2,E5 HSC-PH3-B1,B2,B5. mm fiber Light weight type Adapter-Panel Mounting Plastic Housing Products HSC-A3 HSC-A3-D1 HSC-A3-D2 Die Cast Housing Products HSC-A2 HSC-A2-D1 Conversion adapter FC to SC - Screw Mounting HSC-PH.-E1,E2,E5 Short length type (For Cable Diameter: 2mm) HSC-PH2-E1-A Short length type (For Cable Diameter: 3mm) HSCJ-HRFCJ-B FC to SC - Panel Mounting HSCJ-HRFCJ-C ST to SC - Screw Mounting HSC-PH3-A4 Conversion adapter - FC jack to SC Plug HSCP-HRFCJ-1, 2 HSCP-HRFCJ-1AS, 2AS HSCJ-HSTJ-B Receptacle HSC-R1-B,R2-B Simplified receptacle HSC-SR-1,D1 HSC-SR-2,D2 <Tool Insertion/Extraction Connectors> SC2 type plug housing Long strain relief (For Cable Diameter: 2 mm & 3mm) HSC2-PH2-E1,E2,E5 HSC2-PH3-B1,B2,B5. mm fiber Type HSC2-PH.-E1,E2 Short length type (For Cable Diameter: 2 mm) HSC2-PH2-E1-A Short length type (For Cable Diameter: 3mm) Adapter 4-Position Adapter Panel Mounting type HSC2-4A HSC2-4A-D1 5-Position Adapter Panel Mounting type HSC2-5A Simplified receptacle HSC2-PH3-A HSC2-8SR-1 HSC2-8SR-D1 2
4 Duplex type <Plug Housings> <Adapters> F type Plug Housing (For Cable Diameter: 2mm&3mm) HSCF-2PH2-E1,E2 HSCF-2PH3-B1,B2 <Complies with ANSI Standard for adjustable Type> For Single mode (For Cable Diameter: 2mm&3mm) HSCM-2SPH2-B1,B2 HSCM-2SPH3-B1,B2 For Multi mode (For Cable Diameter: 2 mm & 3mm) HSCM-2GPH2-B1 HSCM-2GPH3-B1 H type Plug Housing (For Cable Diameter: 2 mm & 3mm) HSCH-2PH2-B1,B2 HSCH-2PH3-B1,B2 F type Panel Mounting HSCF-2A(P) HSCF-2A-D(P) H type Snap - in HSCH-2A1(P) HSCH-2A1-D(P) Screw Mounting HSCH-2A(P) HSCH-2A-D(P) Fixed attenuators For single mode For GI HSC-AT 11K-A ** See Page 85 for details. HSC-AT5S-B ** A Terminators Plug type Tool- Insertion/Removal HSC-TM-P1 HSC2-TM-P1 Receptacle type Tool Insertion/Removal HSC-TM-R1 See Page 8 for details. HSC2-TM-R1 3
5 Simplex type Strain relief type Light weight type (For.mm fiber) Short length type (For 2mm Cable) Short length type (For 3mm Cable) Boot color Polishing type HSC-PH.-E1(6) HSC-PH.-E2(31) Light purple Ad HSC-PH.-E5(31) Green A Fiber cable type Boot color Polishing type Outer jacket fixing HSC-PH2-E1(31) HSC-PH2-E2(31) Ø2mm Light purple Ad Glue HSC-PH2-E5(31) Green A HSC-PH3-B1(31) HSC-PH3-B2(31) Ø3mm Light purple Ad Crimp HSC-PH3-B5(31) Green A 7.4. HSC-PH2-E1-A(31) HSC-PH2-E2-A(31) HSC-PH2-E5-A Boot color Polishing type Outer jacket fixing Light purple Green Ad A Glue 7.4. HSC-PH3-A4(31) HSC-PH3-A4(32) Boot color Polishing type Outer jacket fixing Crimp Light purple Ad 31
6 Tool Insertion/Extraction Plug Housings Strain relief type 55 Light weight type (For.mm fiber) 33 Short length type (For 2mm Cable) 36.5 Short length type (For 3mm Cable) Fiber cable type Boot color Polishing type Outer jacket fixing HSC2-PH2-E1(31) HSC2-PH2-E2(31) Ø2mm Light purple Ad Glue HSC2-PH2-E5(31) Green A HSC2-PH3-B1(31) HSC2-PH3-B2(31) Ø3mm Light purple Ad Crimp HSC2-PH3-B Green A 6 Boot color Polishing type HSC2-PH.-E1(31) U HSC2-PH.-E2(31) Light purple Ad 6 HSC2-PH2-E1-A HSC2-PH2-E2-A Boot color Polishing type Outer jacket fixing Glue Light purple Ad 6 HSC2-PH3-A(31) Boot color Polishing type Outer jacket attachment Crimp Note : Please contact HIROSE for other variations. 32
7 Receptacles Ø2.3 Note: Designed for power meter sensors Ferrules For, Ad and U Ø2.4±.5 ØA (Hole diameter) (Hole diameter) Ø1 Ø4.6 For A Ø2.4±.5 Ø1 ØA Ø4.6 Ø7 Ø3 Ø1 M15 HSC-R1-B(5) HSC-R2-B(5) Remarks For MM For SM A dimension Applicable Fiber cable HSC-F321-A125(1) HSC-F321-A1255(1) SM,MM HSC-F321-A126(1) (Hole diameter) Ø1(Hole diameter) A dimension Applicable Fiber cable HSC-F31-A125 HSC-F31-A SM HSC-F31-A (1)No gap design. (2)The entrance angle of the fiber has been set at 6 for easy fiber insertion. Minimal gap:(.1mm max.) 6 fiber entrance angle 33
8 Adapters - Panel Mounting SC adapters SC/SC Plastic Housing ±.1 Ø M2.4 or 2-Ø2.4 Panel thickness: 1.6mm HSC-A3(51) HSC-A3-D1(2) HSC-A3-D2(6) Split sleeve Copper alloy Zirconia Zirconia Remarks,Ad A SC/SC Die Cast Metal Housing ±.1 HSC-A2(51) HSC-A2-D1(1) Ø Panel thickness: 1.6mm 2-M2.4 or 2-Ø Split sleeve Copper alloy Zirconia SC2 adapters SC/SC2 4-way adapter Panel thickness: 1.6mm HSC2-4A(51) HSC2-4A-D1(1) Split sleeve Copper alloy Zirconia SC/SC2 5-way adapter (for Multi-mode fiber) Panel thickness: 1.6mm HSC2-5A(51) Split sleeve Copper alloy 34
9 Conversion adapters FC / SC Screw Mounting M Ø M2.4 or 2-Ø M15 Ø1 13.4±.1 HSCJ-HRFCJ-B(51) Split sleeve Copper alloy FC / SC Snap-in and/or Screw Mounting Ø M2.4 or 2-Ø M Ø ±.1 Panel thickness: 1.6mm HSCJ-HRFCJ-C(51) ST / SC Screw Mounting M15 Ø Ø 2 Ø7 Split sleeve Copper alloy M2.4 or 2-Ø Ø Ø ±.1 HSCJ-HSTJ-B(51) Split sleeve Copper alloy 35
10 FC / SC.4 M Split sleeve Polishing type Applicable Fiber cable HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51) Copper alloy Ad Ad GI-5/125 SM-.5/125 The positions of SC guide key and FC guide slot will not be always aligned Cap 75 Ø3.6 Hole Ø1 () FC / SC 15 (3.) Split sleeve Polishing type Applicable Fiber cable HRFCP-HSCJ-1(51) GI-5/125 HRFCP-HSCJ-1AS(51) Ad Copper alloy HRFCP-HSCJ-2(51) SM-.5/125 HRFCP-HSCJ-2AS(51) Ad The positions of SC guide slot and FC guide key will not be always aligned. HSC-C Applicable products HSC-A2, HSC-A3, HSCJ-HRFCJ-B, CHSCJ-HSTJ-B, HSC-R1-B, HSC-R2-B 36
11 BMounting Dimensions Unit: mm Combination Dimensions Adapter Housing HSC-PH2-E1 a b c d e f Plug Panel Adapter Plug HSC-A2 HSC-A2-D1 HSC-A3 HSC-A3-D1 HSC-PH2-E2 HSC-PH3-B1 HSC-PH3-B2 HSC-PH2-E1-A HSC-PH3-A HSC-PH.-E HSC2-PH2-E1 HSC2-4A HSC2-4A-D1 HSC2-5A HSC2-5A-D1 HSC2-PH2-E2 HSC2-PH3-B1 HSC2-PH3-B2 HSC2-PH3-A HSC-PH2-E1-A HSC2-PH.-E HSC-PH2-E1 HSC-R1-B HSC-R2-B HSC-PH2-E1 HSC-PH3-B HSC-PH3-B2 Note: Panel thickness: 1.6mm Cable assembly SC strain relief type. Fiber cable type Polishing type Cable Diameter HSC-SPE2-F3Q-L Ø2mm HSC-S2-F3A-L Ø3mm HSC-ASPE2-F3Q-L Ø2mm SM-.5/125 Ad HSC-AS2-F3A-L Ø3mm HSC-CSPE2-F3Q-L Ø2mm A HSC-CS2-F3A-L Ø3mm HSC-SPE2-F3P-L Ø2mm GI-5/125 HSC-S2-F3B-L Ø3mm Note 1: The "L" within the Product Number indicates the length of the cable illustrated on the drawing. Please specify values in metric units. Note 2: HSC2 cable assemblies are also available. Note 3: A polishing is performed at an angle of 8. Mating with connectors polished or Ad is not possible. Note : Please contact HIROSE if you have any requests. 37
12 Tools Crimp Tool Applicable connector HSC-T SC plug for 2mm, 3mm cable. <Locations> (This is used in crimping of Kevlar at time of the plug termination.) (1)2mm Jacket crimping: Please select section A 3mm Jacket crimping: Please select section C (2)Kevlar TM crimping: Please select section B HSC2 Insertion/Extraction Tool HSC-T1-L Applicable Products HSC2 series. <How to operate> 1.Open the tip of tool by compressing levers as shown below. Hold/release lever 2.Insert the tool (with opening the tips) into adapter. 3.Release the levers (then the tool catch HSC2 plug) and you can release the connector. Plug assemble Tool HSC2-PH2/CVMD
13 SC Duplex BNotes SC duplex adapters can be also connected with Simplex SC plugs. SC type attenuators (HSC-AT11K-Aπ-π) can be connected only with F type adapters. Plug Housing F Type Applicable Cable Diameter Boot Color Polishing type HSCF-2PH2-E1(P)(31) Ø2mm HSCF-2PH2-E2(P)(31) Light purple Ad HSCF-2PH3-B1(P)(31) Ø3mm HSCF-2PH3-B2(P)(31) Light purple Ad H Type Applicable Cable Diameter Boot Color Polishing type HSCH-2PH2-B1(P)(31) Ø2mm HSCH-2PH2-B2(P)(31) Light purple Ad HSCH-2PH3-B1(P)(31) Ø3mm HSCH-2PH3-B2(P)(31) Light purple Ad 3
14 Adapters F type Snap-in and/or Screw Mounting Ø2.3 M ± Panel thickness: 1.6mm Split sleeve Color HSCF-2A(P)(51) Copper sleeve HSCF-2A-D(P)(6) Zirconia HSCF-2A-D2(P)(6) Green H type Snap-in (8.5) 13 Split sleeve Color HSCH-2A1(P)(51) Copper sleeve HSCH-2A1-D(P)(2) Zirconia H type Snap-in and/or Screw Mounting 17. (8.5) Ø M2.4 or Ø Panel thickness: 1.6mm ±.1 Panel thickness: 1.6mm Split sleeve Color HSCH-2A(P)(51) Copper sleeve HSCH-2A-D(P)(2) Zirconia HSCH-2A-D2(P)(3) Green 4
15 BSC Duplex connector assemblies. Fiber cable type Polishing type Cable Diameter HSCF-SP2PP-F3Q-L HSCH-SP2PP-F3Q-L HSCF-SP2PP-F3QW-L HSCH-SP2PP-F3QW-L HSCF-SP2PP-F3A-L HSCH-SP2PP-F3A-L HSCF-SP2PP-F3AW-L HSCH-SP2PP-F3AW-L HSCF-ASP2PP-F3Q-L HSCH-ASP2PP-F3Q-L HSCF-ASP2PP-F3QW-L HSCH-ASP2PP-F3QW-L HSCF-ASP2PP-F3A-L HSCH-ASP2PP-F3A-L HSCF-ASP2PP-F3AW-L HSCH-ASP2PP-F3AW-L HSCF-SP2PP-F3P-L HSCH-SP2PP-F3P-L HSCF-SP2PP-F3PW-L HSCH-SP2PP-F3PW-L HSCF-SP2PP-F3B-L HSCH-SP2PP-F3B-L HSCF-SP2PP-F3BW-L HSCH-SP2PP-F3BW-L SM-.5/125 GI-5/125 Note 1: The "L" within the Product Number indicates the length of the cable. Please specify "L" in mm. Note 2: Please contact us if you have any requests. HIROSE will offer excellent solutions to meet your requirements. Ad Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord BMounting Dimensions Plug Plug Adapter Panel <F Type> Unit: mm Combination Dimensions Adapter Housing a b c d e f HSCF-2A(P) HSCF-2A-D(P) HSC-PH*-E# HSCF-PH*-B#(P) HSC-PH*-A4 HSC-PH.-E# <H Type> Combination Dimensions Adapter Housing a b c d e f HSCH-2A(P) HSCH-2A-D(P) HSCH-2A1(P) Note 1: * indicates cable diameter: Note 2: # indicates polishing type: HSC-PH*-E# HSCH-2PH*-B#(P) HSC-PH*-A4 HSC-PH.-E# 2= Ø2mm diameter 3= Ø3mm diameter 1= polishing 2= Ad polishing
16 Complies with ANSI Standard ANSI X3T.3 Fibre Channel Physical and Signaling Interface Plug Housings For Single Mode Applicable cable Boot color Polishing type HSCM-2SPH2-B Simplex-2mm dia. cable or dual fiber zip cable HSCM-2SPH3-B Simplex-3mm dia. cable or dual fiber zip cable HSCM-2SPH2-B Simplex-2mm dia. cable or dual fiber zip cable Light purple Ad HSCM-2SPH3-B2 - Simplex-3mm dia. cable or dual fiber zip cable For Multi-mode Applicable cable Boot color Polishing type HSCM-2GPH2-B Simplex-2mm dia. cable or dual fiber zip cable HSCM-2GPH3-B Simplex-3mm dia. cable or dual fiber zip cable Ferrules Convertional SC ferrules. Refer to page 33 for details. Adapters F type SC adapters. Refer to page 4 for details. 42
17 a Simplified Receptacles & Plugs Features 1.Space saving: Only 23.8mm plug length. Types of SC plug Length(mm) Simplified plug 23.8 SC plug for.mm fiber 33 SC2 plug for.mm fiber 33 Installation image In side equipment Out side equipment a SC Simplified plug SC or SC2 plug 43
18 Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C Optical Characeristics Mechanical Characteristics Environmental Characteristics Item Test Method (IEC 613) Specifications Insertion Loss Return Loss Ferrule withdrawal (SM) (GI) (SM) (GI) Wavelength 131nm (LD) Wavelength 131nm (LED) Wavelength 131nm (LD).5dB max. (, Ad).3dB max. () 22dB min. () 4dB min. (Ad) 22dB min. () Extract zirconia gauge 2.4 ±.5 mm dia Copper alloy split sleeve 2N to 5.N from split sleeve. Zirconia split sleeve 2N to 3.N Durability 1 times (cycles, mating/un-mating) Frequency: 1 to 55 Hz, single amplitude of.75 mm, Vibration 2 hours in each of the 3 axis. Acceleration of 81 m/s 2, 6 ms duration, sine halfwave waveform, 1 cycles in each of the 3 axis. Shock Humidity resistance Temperature: -1 C to 65 C, humidity: % to 6% (Temperature/ humidity- cycles) 2 cycles Change of temperature Dry Heat 6 hours at 85 C Cold 6 hours at -25 C Temperature: -4 C / +75 C 42cycles (Complies with Telcordia standard GR-326-CORE) Insertion loss fluctuation after test:.2db max. No visible damage, cracks or part dislocation. Materials Simplified receptacle Part Housing Sleeve Split sleeve Plate Dust cap Simplified plug Part Ferrule Boot Ferrule cap Simplified plug extraction tool Part Extraction tool Material Synthetic resin Synthetic resin Zirconia or Copper alloy Stainless steel Synthetic resin Material Zirconia and Synthetic resin Synthetic resin Synthetic resin Material Synthetic resin 44
19 Simplified receptacle to SC Simplex / Shrouded S R 2-Ø2.3 S C 2-M2.4 Simplex / Unshrouded M ± S R JAPAN S C JAPAN Split sleeve Color HSC-SR-1(51) Copper alloy HSC-SR-D1(2) Zirconia HSC-SR-1(3) None ±.1 Split sleeve Color HSC-SR-2(51) Copper alloy HSC-SR-D2(6) Zirconia HSC-SR-2(3) None Duplex H type / Shrouded ( 8.5 ) M Ø ±.1 Panel thickness: 1.6mm Split sleeve Color HSCH-2SR-1(R)(51) Copper alloy HSCH-2SR-D1(R)(1) Zirconia HSCH-2SR-1(R)(3) None Duplex H type / Shrouded (Without plate) ( 8.5 ) M Ø ±.1 Split sleeve Color HSCH-2SR-3(R)(51) Copper alloy HSCH-2SR-D3(R)(1) Zirconia HSCH-2SR-3(R)(3) None 45
20 4SR JAPAN 4SR JAPAN Duplex F Type / Unshrouded 2-Ø2.3 SCR 2SR 2-M2.4 or 2-Ø ±.1 Split sleeve Color HSCF-2SR-2(P)(51) Copper alloy HSCF-2SR-D2(P)(2) Zirconia HSCF-2SR-2(P)(3) None Simplified Receptacles to SC2 4-position / Shrouded 2-Ø M2.4 or 2-Ø Position / Shrouded Ø S R 8 S R 2-M2.4 or 2-Ø ± Split sleeve Color HSC2-4SR-1(51) Copper alloy HSC2-4SR-D1(1) Zirconia HSC2-4SR-1(3) None Split sleeve Color HSC2-8SR-1(51) Copper alloy HSC2-8SR-D1(1) Zirconia HSC2-8SR-1(3) None 46
21 8-Position / Unshrouded Ø M2.4 2-Ø Simplified plug for.mm fiber ± Split sleeve Color HSC2-8SR-2(51) Copper alloy HSC2-8SR-D2(1) Zirconia HSC2-8SR-2(3) None Ø2.44 ± ØA (Hole diameter) A dimension Boot color HSC2-FK-A125(31) HSC2-FK-A126(31) Black HSC2-FK-A1255(31) Split sleeve Zirconia 11.4 Copper alloy Split sleeve HSC-SLIT-SLEEVE(51) Copper alloy HSC-D Zirconia Extraction tool for Simplified plug HSC-T HSC-T
SECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
Interface RF Connector with Switch
NEW Interface RF Connector with Switch MS-5C Series Overview Designed for end user applications requiring redirection of the transmission. Small size, lightweight and high reliability make it ideal for
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
MU Connector Series. Single Mode Small Form Factor Connector. qhigh quality, high precision Ø qinternational standard IEC FEATURES
MU Connector Series Single Mode Small Form Factor Connector FEATURES qhigh quality, high precision Ø 1. zirconia ferrule produced by SII s integrated production process from molding to final inspection.
Interface Connectors for Miniature, Portable Terminal Devices
NEW Interface Connectors for Miniature, Portable Terminal Devices ST Series Strong locking mechanism Right Mating direction Left Top 9N max. Overview Developed as external input/output connectors for the
Interface RF Connector with Switch, built-in interlock, DC to 3GHz
Interface RF Connector with Switch, built-in interlock, DC to 3Hz MS-151NB Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the
Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
CAT 6 Data Wiring System Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
CAT 6 Data Wiring System Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height
Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height N.FL Series Mated height comparison (With U.FL-LP(V) ) Features 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size:
Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors (IDC)
Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors (IDC) QR/P18 Series Overview The QR/P18 Series of miniature rack/panel connectors is designed for the complete segmentation
Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
NEW Subminiature Coaxial Switch 1.35 mm High, DC to 11 Hz MS-156C Series Halogen Free Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit
Crimplok. Connectors. 3M Crimplok ST* Connector Multimode 1. 3M Crimplok SC Connector Single-mode 2
3 Crimplok Connectors Quick, easy installation and superior performance To successfully design, install or operate today s fiber optic networks, you need components that offer speed and reliability from
Series MCX 50 micro miniature connectors
Series MCX 50 micro miniature connectors Description Content MCX 50 HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size,weight, durability and performance for applications
EBU Technical Recommendation R Connectors for camera cables with fibre optical transmission
Connectors for camera cables with fibre optical transmission EBU UER EBU Committee First Issued Revised Re-issued PMC 1999 Keywords: Cameras, digital processing, fibre optical transmission The EBU has
EZ-MATE CONNECTORS The Complete Family of Multi-Channel Fiber Optic Connectors for Harsh Environment Deployable Systems
The Complete Family of Multi-Channel Fiber Optic Connectors for Harsh Environment Deployable Systems Overview The OCC EZ-MATE family of hermaphroditic style fiber optic connectors provides the most comprehensive
SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE
SP-CTN-CT3000M,CT3000ML-00 ISSUED : 2015/02/11 PAGE : 8 SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE CT3000M/CT3000ML Fiber Optic Splice Closure 2 / 8 1. GENERAL This specification covers the standards
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS
SERIES BNC 50, COAXIAL MINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER BNC is still one of the most popular connector series, featuring a two stud bayonet coupling mechanism, which is particularly
www.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
SPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
Type "N" Connectors. Type "N" Interface Dimensions
Type "N" Connectors The type N series coaxial connectors were originally designed as medium-size low voltage constant impedance 50 OHM connectors. Type N connectors found immediate popularity for microwave
Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
Rectangular, High-Pin-Count Rack/Panel Insulation Displacement Connectors (IDC)
Rectangular, High-Pin-Count Rack/Panel Insulation Displacement Connectors (IDC) QR/P18 Series 2.5Gbps Eye Diagram Overview The QR/P18 Series of miniature rack/panel connectors is designed for the complete
SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division
SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)
MT-RJ SECURE Product Expansion Now 10 Variants of the MT-RJ SECURE Products
MT-RJ Product Expansion Now 0 Variants of the MT-RJ Products In response to several customers, the MT-RJ product line has been expanded with an additional six color/key versions. In addition to the original
OPTICAL CHARACTERISTICS (applied to 12c MPO/MTP ) Item Parameter Reference
MPO/MTP TRUNK CABLE FEATURES MTP (US Conec) brand or MPO standard compliant multifiber connector Connector's design complies with IEC 61754-7 standards 4, 8, 12 and 24-fiber with single mode and multimode
MCX Miniature Coaxial Connectors
ONLINE CATALOG MCX Miniature Coaxial Connectors 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com e-mail: aepsales@aepconnectors.com Mating Interfaces MCX Miniature Coaxial
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Product Specifications Rating Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with
Cable Jacket - The outermost layer of the fiber cable. Application: Types Single mode Multi mode. Simplex or Duplex available
Fiber Optic Products FIBER OPTIC PRODUCTS FIBER OPTIC PATCH CORD CABLE The Construction of a Fiber-Optic Cable Cable Jacket - The outermost layer of the fiber cable. Strengthening fibers - The strengthening
Product Catalogue. Fiber Optic Assemblies & Adapters. Table of Contents General Description... 2
Product Catalogue Fiber Optic Assemblies & Adapters Table of Contents 1. General Description... 2 2. Connectors... 3 2.1 SC/UPC... 3 2.2 SC/APC... 3 2.3 FC/UPC... 3 2.4 FC/APC... 3 2.5 ST/UPC... 3 2.6
0.3 mm Pitch, 1.5 mm Mated Height, Board- to-fine Coaxial Cable Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
Introducing Ultra Short LC : Fiber Optic Cable Assemblies
Introducing Ultra Short LC connector based, high quality single mode and multi mode fiber optic cable assemblies have been designed to meet the highest and most demanding Industry standards. The newly
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division
Click & Go. LWL-NE4-Katalog. Click & Go Modular Solutions. Subject to technical changes! 1
Modular Solutions Subject to technical changes! 1 Since 1986, braun telecom has stood for continuity and competence in broadband communication and has become one of the leading suppliers of products and
Card Edge Type Ribbon Cable Connector
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
bmam connectors DIVIDER PAGE
bmam connectors DIVIDER PAGE 4 bmam interface dimensions "E" "D" REF. PLANE "E" REF. PLANE "G" "C".0 REF. 60 "C" "B" "B".0 REF. 0 "F" "D" male, plug INCHES / MILLIMETERS MINIMUM MAXIMUM LTR. IN. MM. IN.
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems. High Density RF Interconnect
HDRFI Series Tensolite High-Performance Cable & Interconnect Systems High Density RF Interconnect HDRFI is a patented Tensolite connection system that transfers high frequency signals through a unique
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
TE Connectivity DEUTSCH ACT Series MIL-DTL Series III Composite Connectors
TE Connectivity DEUTSCH ACT Series MIL-DTL-38999 Series III Composite Connectors APPLICATIONS FEATURES High-performance military aircraft Commercial aircraft Communications equipment Armored personnel
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
ARINC 801 Fiber Optic Interconnects for Aerospace & Defense. A Complete End-to-End Solution Featuring Connectors, Termini & Cable Harnesses
ARINC 801 Fiber Optic Interconnects for Aerospace & Defense A Complete End-to-End Solution Featuring Connectors, Termini & Cable Harnesses We Connect the Aerospace & Defense Industry with High-Speed Data,
MCX - 75 Ohm Connectors
133-8333-001 4 133-8333-401 4 133-8334-001 4 133-8334-401 4 133-8433-001 3 133-8433-101 3 133-8434-001 3 133-8445-001* 3 133-8445-101* 3 133-8701-201 5 133-8701-211 5 133-8701-301 6 133-8701-311 6 133-8701-401
SC Connector. Fiber Optic Connectors. MDR Electronics
SC Connector Fiber Optic Connectors MDR Electronics www.mdrelectronics.com Table of contents 1. Introduction 3 2. Image and line drawing 4 3. Types of connector 5 4. Specifications 6 5. Ask for assistance
The World Of Professional Fiber Optics. safe flexible reliable
The World Of Professional Fiber Optics safe flexible reliable CONTENTS Contents General Info.... 3 2-Channel System.... 6 4-Channel System.... 10 SMPTE System.... 15 Patchcords.... 19 Accessories.... 21
Non Magnetic Connectors Product Catalog
Non Magnetic Connectors Product Catalog Introduction Johnson s Non-Magnetic Connector Additions Offer Solutions to MR Imaging Technology Johnson, a product line of Cinch Connectivity Solutions, has expanded
Non Magnetic Connectors
Non Magnetic Connectors Johnson Components builds coaxial connectors using innovative materials and design to provide Mil Spec Performance at a commercial price. Now we offer our Non Magnetic Connectors
TE Connectivity DEUTSCH DL Series MIL-DTL Series III Connectors
Applications Features TE Connectivity DEUTSCH DL Series MIL-DTL-83723 Series III Connectors High-performance military aircraft Commercial aircraft Communications equipment Armored personnel carriers &
LIIN-25 FO Pigtail FC (0.9mm)
LIIN25 FO Pigtail FC (0.9mm) Features Single and Multi Mode ISO900, RoHS Compliant Test Certificate for each item Batch number tracking Standards of reference and applications ITU.T G652.D, ISO/IEC 80,
SUHNER QMA SUBMINIATURE CONNECTORS
SUHNER QMA SUBMINIATURE CONNECTORS Description Content Page SUHNER QMA coaxial connectors are available with 50 Ω impedance. The frequency range extends to 11 GHz, depending on the connector and cable
Ultra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
High Speed Data Connector (HSSDC) For 100 MBit/Sec Token Ring. John L. Hill AMP Incorporated July, 1998
High Speed Data Connector (HSSDC) For 100 MBit/Sec Token Ring John L. Hill AMP Incorporated July, 1998 High Performance Cable Assembly Characteristics Controlled/Matched Impedance Connectors and Cables
Small Circular Connector. JN1W / JN2W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector / Series CONNECTOR MB-0178-5 December 2012 Angle Plug Cable Connecting Straight Plug Wall Mount Cable Connecting Waterproof Cap
SECTION 10 BNC / BNC 75 HDTV / BNC-TRX R141 / R142 / R266
SECTION 10 10 BNC / BNC 75 HDTV / BNC-TRX R141 / R142 / R266 Contents Introduction... 10-4 to 10-5 Interfaces... 10-6 to 10-7 Characteristics... 10-8 to 10-11 Finder guide...10-12 to 10-13 COMPOSITE BNC
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
SECTION 9 BNC/BNC 75 HDTV/BNC-TRX R141/R142/R266 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 9 BNC/BNC 75 HDTV/BNCTRX R141/R142/R266 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BNC Introduction... 94 to 95 Interfaces... 96 to 97 Characteristics...98
HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
SPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:01 Date: 07.10.06 SPECIFICATION OF 96F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-96/SM/MTY(F)-MFN-O6.3 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM, USB Powered - 5.0VDC
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM, USB Powered - 5.0VDC Single Port, Jam Nut, USB Powered FEATURES Compliant with IEEE-802.3:2005 Fast Ethernet
Highlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors
Cables & Adaptors Highlights: Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Adaptors www.pcb.com 716-684-0001 PCB Piezotronics, Inc. Automotive Sensors Division Common
Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content
Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content Page 1 of 10 GENERAL A fiber optic cable system is very similar to a copper wire system in that it is used to transmit data
SPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:00 Date: 08.03.2010 SPECIFICATION OF 192F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-192/SM/MTY(F)-MFN-O9.1 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan No. FB-KL4001C for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) Aug 2014 1 1. General This specification describes
Description: Pair Color Code Chart: Pair Color Chart 1 Brown White Brown 2 Orange White Orange 3 Green White Green 4 Blue White Blue.
Description: OZLINX CAT5e cable has a guaranteed performance; exceeds the Category 5e performance requirements and provides positive PSACR up to 155MHz for bandwidth requirement in the future. Product
Gigabit Multi-mode SX to Single Mode LX Converter. User s Manual NGF-728 Series. Warning COPYRIGHT
COPYRIGHT Gigabit Multi-mode SX to Single Mode LX Converter User s Manual NGF-728 Series All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
TE Connectivity DEUTSCH DJT Series MIL-DTL Series I Connectors
Applications Features TE Connectivity DEUTSCH DJT Series MIL-DTL-38999 Series I Connectors High-performance military aircraft Commercial aircraft Communications equipment Armored personnel carriers & tanks
APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors
PPLINCES /// MT, CST-100 II ND SL-156 CONNECTORS CONNECTORS/ PPLINCES MT, CST-100 II and SL-156 Connectors Contents Introduction This catalog has been designed to assist you, our customer, identify products
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
SERIES HPQN CONNECTORS
SERIES HPQN CONNECTORS 1 DESCRIPTION Patented in 2008 by Anoison Electronics, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
SPECIAL SPECIFICATION 6559 Telecommunication Cable
2004 Specifications CSJ 0015-09-147, etc. SPECIAL SPECIFICATION 6559 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing, training,
Materials Connector part Material Finish
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Brass, Phosphor Bronze, or Beryllium Copper Insulator Delrin or Teflon N/A Crimp ferrule Annealed
DIAS power supply and DIC 221 fibre optic cable coupling module
POWER SUPPLY AND FIBRE OPTIC COUPLING MODULE DIC 221 DIAS power supply and DIC 221 fibre optic cable coupling module for the power supply of DIAS function modules, 2 x fibre optic cable connections (DIAS
PREMIUM 5e F/UTP PRODUCTS
Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been
The Custom Interconnect Leader TM
LC Series.5.188.685 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: 50 ohms DC to 1.0 GHz 5,000 volts rms 3,000 volts rms 5,000
SPECIAL SPECIFICATION 8540 Telecommunication Cable
2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,
OPTICAL FIBERCONNECT. Version 3.
OPTICAL FIBERCONNECT Version 3. OPTICAL Fiberconnect intro In today s CATV networks the requirements for a wide choice of products for network applications are growing rapidly. In this brochure a comprehensive
Fibre Optic Connectors
Fibre Optic Connectors Expanded Beam - Fibre Optic Connectors D38999 Derived Expanded Beam Connectors for Harsh Enviroment Applications NCAGE Code U5792 www.polamco.com Expanded Beam - Fibre Optic Connectors
Cylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
C Connectors. Automatic Connector. Introduction. Contents. C Interface Options. 631/ FAX 631/
utomatic onnector onnectors Introduction 2004 utomatic onnector. ll rights reserved. pdf 1.0.1 3-23-04 ontents Specifications........................... 2 Straight Plugs...................... 3 Right ngle
8D with High Frequency Coaxial Contact
8D Series M Coaxial Contacts 8D with High Frequency Coaxial Contact robust and powerfull coaxial High Frequency transmission (M) now available in any size 8 SOURIU insert of D38999 Series III. Spring HF
Mar11 Rev E
Product Specification 108-1832 11Mar11 Rev E MT-RJ Patch Panel and Outlet Jacks (Standard, XG, SECURE and SECURE XG) 1. SCOPE 1.1. Content This specification, which meets the Optical Fiber Cabling Components
for FOSTEC INC. 1/ 15
TECHNICAL SPECIFICATION for OPTICAL FIBER PATCH CORD / PIGTAIL FOSTEC / 5 . Scope: This specification is applicable to optical fiber patch cord, pigtail and with w optical connectors. The pigtail is single
CC-Link IE Controller Network Compatible. CC-Link IE Controller Network Recommended Network Wiring Parts Test Specifications
Model Title CC-Link IE Controller Network Compatible CC-Link IE Controller Network Recommended Network Wiring Parts Specifications Management number: BAP-C0401-028-A CC-Link Partner Association (1/31)
SMA One Piece Semi-Rigid Connectors
SMA One Piece Semi-Rigid Connectors The Johnson captivated solderless contact connectors for semi-rigid cable provide a unique solution for high frequency cable assemblers. As compared to standard solder-on
Series SK (2.92 mm) prec. submini. connectors
Series prec. submini. connectors Description Content HUBER+SUHNER SK connectors are precision connectors for microwave applications up to 40 GHz. They are intermateable with series SMA and PC 3.5. They
TNC Connectors. RF Coax Connectors. Product Facts
Product Facts Hex Crimp and Connectors 50 and 75 ohm commercial versions available Provides excellent performance at frequencies up to 7 GHz ow cost commercial type available type is smaller and lighter
Section 8 FIBERLIGN Hardware for Aerial FTTP Applications
Section FIBERLIGN Hardware for Aerial FTTP Applications Table of Contents Page FIBERLIGN Products for ADSS Applications FIBERLIGN ADSS Drop Cable Dead-end...-2 FIBERLIGN Midspan Drop...-5 FIBERLIGN LITE
Delaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011
SECTION 271323 - COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 - GENERAL 1.1 DESCRIPTION A. This section provides the specifications for the work related to the optical fiber system in the project.
RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
SMA - 50 Ohm Connectors
Alphabetical Index 142-0593-001 6 142-0593-006 6 142-0593-401 6 142-0593-406 6 142-0594-001 6 142-0594-006 6 142-0594-401 6 142-0594-406 6 142-0693-001 4 142-0693-006 4 142-0693-051 5 142-0693-056 5 142-0693-101
TENDER SUMMARY. Tender Title:
TENDER SUMMARY Tender Title: Tender Ref: Closing Date: OPEN TENDER FOR THE SUPPLY OF FIBER OPTIC CABLE 384 CORE LOOSE TUBE ( FOC 384C ) FOR TELEKOM MALAYSIA BERHAD ( TM ) LPM/2018/T/02/FOC 384C 23 February
Materials Connector part Material Finish
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Brass, Phosphor Bronze, or Beryllium Copper Insulator Delrin or Teflon N/A Crimp ferrule Annealed
0.8mm Pitch Stacking Height 5 to 9mm Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT
1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single
To select a fibre optic cable, you have to make choices of the fibre selection and the cable construction selection.
Fibre Optic Cables & Connectors Guide Introduction Organising through cables and connectivity options can be an exasperating exercise. It's tough enough working through the categories and levels of copper
Broadcast Interconnect Solutions CONNECTING INNOVATION TO APPLICATION
Broadcast Interconnect Solutions CONNECTING INNOVATION TO APPLICATION Contact Information NORTH AMERICA United States Winchester Electronics World Headquarters 62 Barnes Industrial Road North Wallingford,