As early as 1974, when fiber optic technology was still in its infancy, Corning was working with Europe s leading Public Telecommunications

Size: px
Start display at page:

Download "As early as 1974, when fiber optic technology was still in its infancy, Corning was working with Europe s leading Public Telecommunications"

Transcription

1 Accessories for Copper Communication Networks Edition1 CATALOG

2 Corning: An Experienced and Reliable Partner for You With over 150 years of experience in the world of telecommunications, Corning is an experienced partner you can trust to bring cost-effective solutions to your communication requirements. In the field of fiber optic cable technology, Corning was one of the original pioneers with expertise second to none. As early as 1974, when fiber optic technology was still in its infancy, Corning was working with Europe s leading Public Telecommunications companies in developing trial fiber optic cable routes. This was complemented in 1979 by additional projects in the USA. Together this pioneering work marked the start of the global business which exists today, comprising of a wide range of demanding customer projects. We at Corning offer the broadest range of end-to-end copper and fiber optic product solutions for customers cabling network. As system leaders we provide products not only as individual items but also as complete cable networks from a single source. Our global presence is your gain because, wherever you are located, Corning is close at hand. Our quality and environmental management systems are naturally certified to DIN EN ISO 9001 and ISO

3 The Customer is our Focal Point Our commitment is to meet the expectations of our customers unreservedly in supplying high-quality products and services for all communication networks. 4

4 : Global Cable and Hardware Business A B A Headquarters North-, South-America/Japan Hickory, NC, USA Saskatoon, Canada Montreal, Canada Winston-Salem, NC, USA Keller, TX, USA Kernersville, NC, USA Reynosa, Mexico Mexico City, Mexico Boca Raton, FL, USA Santo Domingo, Dominican Republic Rio Grande, Puerto Rico Buenos Aires, Argentina Tokyo, Japan B Headquarters Europe, Asia/Pacific, Africa Munich, Germany Nordenham, Germany Hagen, Germany Neustadt, Germany Berlin, Germany Favières, France Turin, Italy Roseto degli Abruzzi, Italy Inofitas, Greece Gebze, Turkey Chengdu, China Ho Chi Minh City, Vietnam Ramadan City, Egypt Kuala Lumpur, Malaysia Jakarta, Indonesia Clayton, Australia Derby, GB Warrington, GB Whiston, GB Hemel Hempstead, GB Aberdeen, GB Madrid, Spain 5

5 Content Introduction Corning Product Range for Copper Communication Networks... 8 Mechanical and Heat-shrinkable Closures Introduction...10 Overview on Closures...12 Mechanical Closures for Pressurized Primary Networks Inline Closure UCN...16 Vault Cable Closure UCNV...22 Tool Case for Installation of UCN Closures...26 Inline Closure MHS P...28 Mechanical Closures for Secondary Networks Inline Closure UCA...32 Inline Closure MHS M...34 Distribution Closure BPR...40 Aerial Closure PEV...44 Temporary Splice Protection Closure MEP...46 Heat-shrinkable Closures for Pressurized Primary Networks Reinforced Inline Closures GSC CP...47 Heat-shrinkable Closures for Secondary Networks Reinforced Inline Closures GSC, GSC C...47 Standard Inline Closures SCX, SCX C...54 Repair Sleeves Wrap-around Repair Sleeves SCX R (Standard), GSC R (Reinforced)...59 Gas Torch Set

6 Content Connection and Distribution Systems, Cabinets and Boxes Connection and Distribution System 1001/2001 Series Introduction...64 Disconnection, Switch and Connection Strips...65 Grounding and Dropwire Connection Strip...67 Overvoltage / Overcurrent Protection...68 Plugs, Marking Caps, Cords...70 Tools...71 Mounting Frames, Cable Terminal Heads...72 Label Frames, Strip Dimensions...73 Technical Data...74 Cabinets and Boxes Cross-Connection Cabinet KVz...75 Wall-Mounted Distribution Enclosures / Boxes for 1001/2001 Series...76 Accessories for Distribution Enclosures / Boxes...78 Additional Information Training...82 Contacts...83 Other Catalogs Available in our Product Range...88 Note: The products shown in this catalog demonstrate some of the additional accessories available which are not part of the standard scope of delivery 7

7 Corning Product Range for Copper Communication Networks Introduction Central Office Central Office Homes MDF Apartment complex UCNV UCN, MHS P GSC CP Remote Terminal UCN / MHS P GSC CP PEV UCA / MHSM GSC / SCX UCA / MHSM / BPR GSC / SCX DB CCC CCC GSC SCX Large Business Customers PEV DB CCC UCN, MHS P GSC CP UCN, MHS P GSC CP HVT MDF = Main Distribution Frame CCC = Cross-Connection Cabinet DB = Distribution Box UCN, MHS P, UCA, UCNV, MHSE, PEV, GSC, SCX = Closures The Corning product range provides all main components necessary for connection and distribution of copper cables in communication networks. Corning offers a tip to tip product range from the central office to the subscriber - all out of one hand. Our product range comprises: For the central office and big private switches: Connection and distribution systems MDF. See catalog Connection and Distribution Systems. Distribution closures UCNV for the transition of the main cable to distribution cables For the cable line: Joint and branching closures / repair sleeves: Mechanical inline closures UCN and MHS P for pressurized main cables Mechanical inline closures UCA, MHS M and MEP for non-pressurized branching and distribution cables Mechanical distribution closure BPR for subscriber cables Heat-shrinkable inline closures GSC CP for pressurized main cables Mechanical free-breathing inline closures PEV for aerial cables Heat-shrinkable repair sleeves GSC R / SCX R for all non-pressurized cables Distribution components: Disconnection, connection and switching strips 1001/2001 Series Overvoltage- / overcurrent protection 1001/2001 Series Cable distribution cabinet for accommodating termination heads at switching and distribution points Termination heads for installation in cable distribution cabinets For buildings: Wall distribution cabinets for 1001/2001 Series, outdoor and indoor 8

8 Mechanical and Heat-shrinkable Closures 9

9 Closures for Copper Communication Networks Introduction General With the world s largest range of closures, Corning offers a complete line of solutions for connecting and distributing all types of communication cable. Closures are used to provide protection for splices on straight, branching and distribution cables. The mechanical and electrical continuity provided by the closures must be as though there had been no break in the cables at this point. This requirement applies regardless of the location of the cables, e.g. buried directly in the ground, installed in ducts or on aerial cable routes type of cable, e.g. pressurized or grease filled design of the cable, e.g. with laminated sheath or armoring. The mechanical continuity is achieved by strainrelieving (anchoring) the cable sheaths. The electrical continuity of any armoring or metallic foils in laminated sheaths is provided by a high-quality, low-resistance bond to ground bonding lines. It is provided to protect the installers and the electronic equipment from possible overvoltages which these cable elements may develop from external sources and then discharge. In addition these bonds can be joined to external grounding points. The Closure Range Closures are generally classified according to their design into mechanical and heat-shrink types. Mechanical closures comprise rigid closure tubes or domes with one or two end caps for the cable entrances. The sealing between the closure components themselves and to the cables is made by means of plastic compounds such as sealing tapes or gels or by silicone seals. Pressure is applied to the seals mechanically, i.e. with clips, hooks or screw fasteners. Mechanical closures can be re-entered and closed as required for maintenance or system expansion purposes. The main product of this type offered by Corning is the range of Universal Closures UCN, designed specially for the pressurized primary cable network and hence to withstand maximum stressing. There are also various solutions available for the nonpressurized secondary network, e. g. within the MHS range. Heat-shrink closures comprise heat-shrinkable sleeves which are wrapped around the splice and the cable ends. The closure is shrunk down using a gas torch to contract uniformly around the splice and the cable ends. An adhesive coating, also thermally activated, on the inside of the sleeve ensures an effective seal. There are different types of heat-shrink closure available for both the pressurized primary network and non-pressurized secondary network. 10

10 Closures for Copper Communication Networks Introduction Closure Design Straight or Inline Closure Configuration Incoming and outgoing cables on both sides of the closure. Aerial network Cable in ducts / manhole Direct buried network Butt Configuration All cables are fed into the closure on one side only. Aerial network Cable in manhole / hand-hole 11

11 Closures for Copper Communication Networks Overview on Closures Mechanical Closures UCN UCNV MHS P UCA MHS M BPR PEV MEP Heat-shrinkable Closures GSC CP, GSC C, GSC SCX 12

12 Closures for Copper Communication Networks Overview on Closures Closure Type UCN UCNV MHS P UCA MHS M BPR PEV MEP GSC CP GSC / C SCX / C See page Cable Sealing Version mechanical heat-shrinkable X X X X X X X X X X X Cable pressurized non-pressurized Closure Application aerial duct / manhole buried Closure Configuration straight butt Network Level main distribution high * * Splice Capacity medium low * X Temporary Application Special application: Connection of trunk cables with cables to the MDF inside central offices Cable sealing version Main application Possible but not main application Not possible 13

13 Closures for Copper Communication Networks Mechanical Closures General Corning offers a complete range of mechanical closures for all applications in the copper telecommunication network. The core product of this range is the Universal Closure UCN, the mechanical closure most widely used in the world. More than eight million UCN are in service in pressurized and non-pressurized networks. The UCN is designed as an inline closure with incoming cable(s) on one side and outgoing cable(s) on the other side (straight joint). A modified UCN called UCNC is available as a butt closure with canister and one end cap which accommodates all cables fed in on the same side. Another special application of the UCN is the UCNV (UCN vault closure) which is used in exchange offices for connection of the trunk cable to the MDF cables. Further Closure Types As completion of the UCN range, further closure types are available: Type MHS P for pressurized and non-pressurized high-pair cables Types UCA, MHS M and BPR for non-pressurized low- and medium-pair cables Type PEV (free-breathing) for use on nonpressurized aerial cables Type MEP for temporary non-pressurized applications Mechanical closure UCN Features Access to splice area as often as required without the need of spare parts and consumables High-quality sealing material guarantees watertight encapsulation of the splice area Closure housings made of plastic which withstand high mechanical load Easy and fast installation without additional energy e.g. gas or electricity Re-opening and re-closing of the closure very simple to handle Reliable strain relief systems integrated in end caps No harmful substances are used Designed for at least 30 years lifetime The special features of the different types are described on pages 16 to

14 Closures for Copper Communication Networks Heat-shrinkable Closures and Repair Sleeves Application Heat-shrinkable Closures Heat-shrinkable closures are used in communication cable networks, particularly in the distribution network, as inline closures for protecting and sealing the splice areas of copper cables. They can be used on cut and uncut cables for straight and branch splices. Up to 4 cables can be led into each side of the closure. The following series of closures are available for nonpressurized cable networks: Reinforced closure GSC, GSC C Standard closure SCX, SCX C For pressurized cable networks Corning supplies the reinforced closure GSC CP with tightness testing valve. Repair Sleeves Used for repairing of damaged cable sheaths. Reinforced repair sleeve GSC R Standard repair sleeve SCX R All RXS closure types and repair sleeves are suitable for direct buried installation and aerial application. Heat-shrinkable closures GSC CP, GSC C, GSC Features High mechanical strength Reliable sealing of the splice itself and of the sleeve to the cable sheath against moisture with hot melt adhesive Simple installation, only gas torch for installation required (torch set see page 61) Only a few different sizes required for all cable diameters Designed for at least 30 years lifetime No harmful substances are released during processing The special features of the different heat-shrinkable closures are described on pages 47 to

15 Inline Closure UCN Description Design Application Universal Closures UCN are designed to protect straight or branch splices on high pair count copper cables against environmental influences. The closures can be installed on cut or uncut cables and are suitable for direct buried, aerial and underground installation. They are suitable for pressurized and nonpressurized cables. The Universal Closure UCN consists of two plastic end caps and a plastic closure tube. The two-section end caps incorporate the strain relief that absorbs the mechanical forces which may be applied to the cables. Three-piece end caps are available to accommodate a higher number of cables. Two metal bars interconnect the two end caps. On-site hand-drilling of the cable entries provides flexibility with regard to cable diameter, number and arrangement of the cables. During installation of the end caps, the strain-relief disks are automatically pressed by two aluminum collars onto the cables. The compression guarantees excellent resistance against push and pull. The longitudinally split closure tube is closed with two plastic bars. They are pushed on by a hammer and are secured with pins. Permanently elastic longitudinal and round sealings allow the closure to be opened and re-closed as often as required without the need of consumables. Each UCN is equipped with test valve and external grounding device. Special Features Large variety for all cable types, splice configurations and connectors Individual adaptation of the cable entries on site by drilling the end caps according to number of cables and their diameters Quick re-opening and re-closing of the closure tube without the need of special tools Re-usable closure sealings No outside metal parts mean no danger of corrosion Strain relief system integrated in the end caps UCN: Easy installation with clamping bars 16

16 Inline Closure UCN Kit Content, Installation Kit Content Each closure package contains all parts required for the installation of a branch closure with up to 4 cables. The pre-cut sealing rings of the end caps with the joiner element allow installation of UCN closures on cut as well as on uncut cables respectively on rehabilitation of existing splices. 1 Closure tube 2 Splice protection 3 End caps 4 Connection bar 5 Sealing tape 6 Sealing rings (M-profile with joiner clips) 7 Longitudinal sealing 8 Installation instructions 9 Clamping bars 10 Lubricant 11 Gauge 12 Measuring tape 13 Brush 14 Sealing paste 15 Cable shield connection clips 16 Cleaning tissues 17 Cable sheath connection lead 18 Branching cable shield connection leads 19 Valve protection cap 20 Grounding screws Installation Detailed installation instructions are enclosed in each closure pack. Installation requires a "Tool Case for Installation of Universal Closures UCN" which has to be ordered separately (see page 26). 17

17 Inline Closure UCN Dimensions of Cable Entry Areas Two-section end cap (UCN) B S Two-section A B C S End Cap [mm] [mm] [mm] [mm] UCN UCN A C UCN UCN Oval end cap (UCN) A B S Oval A B S End Cap [mm] [mm] [mm] UCN UCN Three-section end cap (UCNT) A C S 1 B Three-section A B C D E S End Cap mm mm mm mm mm mm UCNT UCNT E D S 1 and 2 = Cutting level 18

18 Inline Closure UCN Capacities, Dimensions, Desiccant Closure Type Capacity in Pairs Capacity in Pairs Desiccant Modular-splice (25 Pairs) Single Splice, (to be or AMP-TEL-Splice or ordered AMP-Mini-PICABOND Splice Scotchlok Connector Splice separately) Conductor Diameter [mm] Conductor Diameter [mm] [g] UCN UCN UCN 7-9 oval UCN UCN UCN UCN UCN UCN 9-20 oval UCN UCN UCN UCN UCN UCN Note: The actual capacity also depends on the possible nominal diameters of the cables to be installed in the end caps. Closure Type Length [mm] Diameter [mm] Sheath Opening inside outside inside outside [mm] UCN UCN UCN 7-9 oval / / UCN UCN UCN UCN UCN UCN 9-20 oval / / UCN UCN UCN UCN UCN UCN

19 Inline Closure UCN Order Numbers Closures Closure Type Delivery Unit Order Number UCN pc. S45754-A2-A1 UCN pc. S45054-A304-A6 UCN 7-9 oval 1 pc. S45054-A303-A33 UCN pc. S45054-A303-A21 UCN pc. S45054-A303-A34 UCN pc. S45054-A303-A22 UCN pc. S45054-A303-A23 UCN pc. S45054-A302-A19 UCN 9-20 oval 1 pc. S45054-A302-A61 UCN pc. S45054-A302-A20 UCN pc. S45754-A2-A2 UCN pc. S45054-A302-A21 UCN pc. S45054-A301-A19 UCN pc. S45054-A301-A20 UCN pc. S45054-A301-A21 All closures with 1 valve and 1 grounding device Spare Parts Designation Delivery Unit Order Number Two-section End Caps with valve, without sealing ring and aluminum collar UCN pc. S45056-M134-A30 UCN pc. S45056-M134-A32 UCN oval 1 pc. S45756-M1-A3 UCN pc. S45056-M134-A34 UCN oval 1 pc. S45756-M1-A2 UCN pc. S45056-M134-A36 Two-section End Caps with grounding device, without sealing ring and aluminum collars UCN pc. S45056-M134-A31 UCN pc. S45056-M134-A33 UCN oval 1 pc. S45756-M1-A5 UCN pc. S45056-M134-A35 UCN oval 1 pc. S45756-M1-A4 UCN pc. S45056-M134-A37 20

20 Inline Closure UCN Order Numbers Spare Parts and Accessories Designation Delivery Unit Order Number Three-section End Caps with grounding device, sealing ring and aluminum collar UCNT pc. S45056-M134-A39 UCNT pc. S45056-M134-A38 One-section End Cap without cable entries (By using one end cap without cable entries, the closure can be used as a canister closure) UCNF pc. C45197-K18-B13 Aluminum Collars for end caps incl. bolts UCN pc. S45056-M134-A60 UCN pc. S45056-M134-A70 UCN for oval end caps 1 pc. S45756-M1-A10 UCN pc. S45056-M134-A80 UCN for oval end caps 1 pc. S45756-M1-A11 UCN pc. S45056-M134-A90 Sealing Rings for end caps (M-Profile with joiner clip) UCN pcs. S45756-M1-A90 UCN also for oval end caps 10 pcs. S45756-M1-A91 UCN pcs. S45756-M1-A92 UCN for oval end caps 10 pcs. S45756-M1-A93 UCN pcs. S45756-M1-A94 Longitudinal Sealing for closure tubes UCN pcs. S45756-M1-A80 UCN pcs. S45756-M1-A13 UCN pcs. S45056-M135-A80 UCN pcs. S45756-M1-A14 UCN 5- / 7- / 9- / pcs. S45056-M135-A90 UCN pcs. S45056-M135-A100 UCN pcs. S45756-M1-A15 UCN 7- / 9- / pcs. S45056-M135-A110 UCN pcs. S45056-M135-A120 Installation Material Sealing Paste, 20 g 10 pcs. S45056-M83-A10 Sealing Tape, 1 roll 5 pcs. S45056-M135-A132 Lubricant, 10 x 20 g, 5 brushes 1 set S45056-M135-A150 Desiccant, 50 g 1 pc. S45056-M130-A3 Cable Sheath Clip 10 pcs. S45056-M80-A3 Cable Sheath Connection Wire, 180 mm 10 pcs. S45056-M135-A140 Aerial Hanging Device 1 set S45754-D1-A1 21

21 Vault Cable Closure UCNV Description Design Universal vault cable closures are available in two variants: 1. Complete UCNV vault closures (3 different sizes) with all components necessary for installation in one closure package. 2. Individual distribution end caps (2 different sizes) to be combined with the well-known UCN universal closures. To produce the desired vault closure, a suitable UCN closure with a corresponding capacity has to be selected and one of the end caps included in the UCN closure package has to be replaced by the corresponding vault cable end cap. Application Universal vault closures UCNV serve to distribute outdoor trunk cables onto indoor distribution cables within exchanges. There, the vault closures can be installed in any position in cable vaults or other spaces. The size of the vault closure to be used depends on the number of distribution cables to be led out, as well as on the number of pairs and the conductor crosssection. For special requirements, RXS also offers a flameretardant closure of the type UCN FR. The material used complies with UL 94 V0. This version meets the requirements for flame-resistant closures to Bellcore TR-NWT The UCNV vault closures comprise a two-section plastic end cap for the trunk cable, an aluminum distribution end cap with the appropriate number of cable entries with rubber sealings for the distribution cables and the longitudinally split closure tube, as well as the necessary installation accessories. Unused cable entries are to be closed with dummy plugs. Adapter plugs are available to adapt the cable entries for smaller cable diameters. Special Features Designed as vault closure in non-pressurized cable networks One end cap suitable for accommodation of max. 20 distribution cables Strain relief for trunk cable is integrated in the end cap No corroding external metal parts No special tool required for opening or closing 22

22 Vault Cable Closure UCNV Kit Content, Installation Kit Content Closure tube 2 Splice protection 3 Longitudinal sealing 4 Connecting bars 5 End cap for trunk cable 6 Grounding wire 7 Clamping bars 8 Sealing tape 9 Sealing paste 10 End cap for distribution cables 11 Sealing rings (M-profile with joiner clips) 12 Cable sheath clip 13 Gauge 14 Measuring tape 15 Cleaning tissues 16 Lubricant 17 Brush 18 Installation instructions Installation Detailed installation instructions are enclosed in each closure pack. Installation requires a "Tool Case for Installation of Universal Closures UCN" which has to be ordered separately (see page 26). 23

23 Vault Cable Closure UCNV Capacity, Dimensions, Order Numbers Number of Distribution Cables, Dimensions Closure Type Number of Length Diameter Sheath Distribution [mm] [mm] Opening Cables inside outside inside outside [mm] UCNV 7-15/ UCNV 9-20/12 12 UCNV 9-20/ Capacity in Pairs Capacity in Pairs Capacity in Pairs Modular Splice (25 pairs) Single Splice, Closure Type or AMP-TEL Splice or AMP-Mini PICABOND Splice 1 Scotchlok Connecting Splice 2 Conductor Diameter [mm] Conductor Diameter [mm] UCNV 7-15/ UCNV 9-20/12 UCNV 9-20/ Note: The actual capacity also depends on the possible nominal diameters of the cables to be installed in the end caps. Cable Capacity / Diameter Closure Type Max. Diameter Max. Number of Distribution Cable Diameter of Main Cable Distribution Cables without Adapter Plug with Adapter Plug UCNV 7-15/10 up to 61 mm to 33 mm 16 to 25 mm UCNV 9-20/12 up to 97 mm to 33 mm 16 to 25 mm UCNV 9-20/20 up to 97 mm to 25 mm - Order Numbers Closure Type Delivery Unit Order Number UCNV 7-15/10 1 pc. S45054-A303-A35 UCNV 9-20/12 1 pc. S45054-A302-A46 UCNV 9-20/20 1 pc. S45054-A302-A47 All closures with external grounding device 24

24 Vault Cable Closure UCNV Installation Material, Distribution End Caps Installation Material for Complete UCNV Closures Designation Delivery Unit Order Number Dummy Plugs 5 pcs. S45054-A107-R10 Adapter Plugs 5 pcs. S45054-A174-R10 Distribution End Caps The UCNV aluminum distribution end caps have 12, 18 and 30 elastically sealed cable entries, respectively. These entries are closed on delivery and can be opened to accommodate the relevant number of distribution cables. The UCNV end caps are supplied with a sealing ring and installation instructions, are installed instead of standard UCN end caps and are to be combined with the UCN closures listed in the table below. Distribution End Caps Type Max. No. of Distribution For Use with the Following Order Number Distribution Cables Cable Ø [mm] UCN Types (Order Number) UCNV 9-/ to 33 UCN 9-20 (S45054-A302-A19) S45056-M134-A140 UCN 9-24 (S45054-A302-A20) UCNV 9-/ to 27 UCN 9-30 (S45054-A302-A21) S45056-M134-A136 UCN (S45054-A301-A19) UCNV 11-/ to 27 UCN (S45054-A301-A20) S45056-M134-A137 UCN (S45054-A301-A21) 25

25 Tool Case for Installation of UCN Closures Equipped Tool Cases Application The tool case contains all standard tools and special tools (hand-driven drilling tool) which are neccessary for installation of the whole UCN closure family. Designation Dimensions [mm] Weight [kg] Order Number Tool Case for UCN closures 650 x 430 x S45055-M119-A13 26

26 Tool Case for Installation of UCN Closures Tools Designation Application Order Number Tool Case, empty For attaching tools C46365-K1-A1 Tool Insert C45365-A4-C20 Lid Insert C45365-A4-C23 Drilling Tool For UCN end caps C45407-A62-A13 Spare Blade For drilling tool C45407-A62-C6 Installation Block For closing and re-opening UCN C45197-A127-B115 Cable Sheath Cutter For splitting plastic cable sheaths S45056-Z472-A3 Punch For punching holes in plastic sheaths for attaching sheath clips C45407-A62-A4 For mounting sheath clips, Socket Wrench connecting bars and grounding straps, 10 x 10 mm and for using the drilling tool S45056-Z426-A3 Socket Wrench 11 x 11 mm For grounding of UCN S45056-Z426-A24 Socket Wrench 13 x 13 mm For installation of UCN end caps S45056-Z426-A2 Wrench, 10 mm For mounting the sheath clips S45056-Z468-A29 Lubricant, 50 g For drilling tool S45057-Z901-H460 Scissors For cutting the sealing material S45056-Z405-A6 Pliers Removing of sealing band from UCN end caps S45057-Z301-H83 Allen Wrench, 4 mm For replacing blade of drilling tool S45056-Z445-A8 Holder As a support for drilling tools C45407-A62-C137 Test/Adjusting Instructions To test and adjust the drilling tool S45055-M119-P430 27

27 Inline Closure MHS P Description Design The MHS P comprises: Two half-shells made of black plastic One end cap providing the sealing and strain relief for one or two incoming cables One end cap providing the sealing and strain relief for up to four outgoing cables A set of silicon seals providing sealing of the closure Application The MHS P mechanical closure is used on all types of communication cables up to 3000 pairs. It provides protection for straight or branched cable connections. For both new installation and rehabilitation, it can be used on pressurized and non-pressurized cables. To insert the cables into the end caps, selected for the type of connection and cable, simply cut out the cable inlets using the specially designed punching pliers. The cables are sealed by applying sealing tapes to the end caps and around the cables. This sealing compound withstands pneumatic pressure and environmental stress. Strain relief is provided by a metal strip held around the cables by a metal collar. Silicon seals, fitted around the end caps and in a groove running along the half-shells, provide perfect sealing for the assembly. The half-shells are closed using non-corrosive screws. The valve is prefitted in the upper half-shell and the ground connection can be installed, on request, on the lower half-shell. Features Complies to the strong requirements of specifications for pressurized closures Full closure range for cables up to 3000 pairs Conforms to all splice configurations Easy and rapid access to the splice for repair and service No use of resin No use of outside energy, e.g. flame or electricity Flash test at 750 mbar / 15 minutes 28

28 Inline Closure MHS P Kit Content, Tool Case Kit Content Upper half-shell 2 Lower half-shell 3 End cap for outgoing cables 4 Clamping bands 5 End cap closing bands 6 Metal strips 7 Marker letters 8 Grapple 9 Circular seal 10 Marker tape 4 x 62 (for MHS P no 6 or no 7) 11 Gloves 12 Paint brush 13 Longitudinal seals 14 Closing gauge 15 Cap closing screws (5 x 35) 16 Roll of sealing tape 17 Cleaning tissue 18 Tube of sealant 19 Marker tape 20 Sachet of grease 21 Holding band 22 End cap closing screw 23 Grapple 24 Circular seal 25 End cap for incoming cables 26 Clamping band 27 Installation instructions (not shown) Tool Case Tool 29

29 Inline Closure MHS P Dimensions, End Caps, Cable Entries Dimensions Closure Type Length [mm] Diameter [mm] Inside Outside Inside Outside MHS P x x 150 MHS P x x 150 MHS P x x 200 MHS P x x 200 A B A C B D End Cap 1/2 End Cap 3/4 End Caps, Cable Entries End Cap 1/2 End Cap 3/4 Type max. cable Ø Dimensions max. cable Ø Dimensions [mm] [mm] [mm] [mm] A B A B C D MHS P x x 120 MHS P x x 120 MHS P x x 160 MHS P x x

30 Inline Closure MHS P Order Numbers Designation MHS P 4-1/2 branched MHS P 4-3/4 branched MHS P 5-1/2 branched MHS P 5-3/4 branched MHS P 6-1/2 branched MHS P 6-3/4 branched MHS P 7-1/2 branched MHS P 7-3/4 branched Accessories Grounding Device Re-entry kit MHS P 4 & 5 1/2 Re-entry kit MHS P 4 & 5 3/4 Re-entry kit MHS P 6 & 7 1/2 Re-entry kit MHS P 6 & 7 3/4 Tool Case for MHS P Order Number S45254-A21-A3 S45254-A21-A4 S45254-A22-A3 S45254-A22-A4 S45254-A23-A3 S45254-A23-A4 S45254-A24-A3 S45254-A24-A4 S45254-M2-R5 S45254-A25-A5 S45254-A25-A6 S45254-A25-A7 S45254-A25-A8 S45254-M4-A2 31

31 Inline Closure UCA Description, Kit Content Design The UCA is designed as a half shell closure with resilient silicone gasket. The half shells, with a hinge molded on one long side, are closed with stainless steel clips. The clips can be closed by hand and levered open again with a screwdriver. To impede unauthorized access to the splice compartment, an anti-access device is available as an accessory. Application The UCA closures are designed to protect splices at straight and branch joints on communication cables in unpressurized secondary networks. The closure can be assembled on all common copper cable types. It is suitable for cut and uncut cables and can be directly buried in the ground or installed in manholes and on aerial cable routes between and on poles as well as on walls. Special Features Very fast access to the splice by use of clamps, without influencing the cable entry areas Four pre-fabricated cable entries Half shell closure with resilient sealing of the half shells permits unlimited re-entry of the closure Shells closed with clips that are closed manually and merely require a screwdriver to re-open Installation without special tools The cable entries are sealed with the proven sealing tape which is pressed by wedges against the bottom shell. Unused cable entries are sealed with dummy plugs. All mechanical stresses from outside on the cables are absorbed by strain-relief elements which are latched into the bottom shell. The electrical interconnections of the cable sheaths are also connected on these strainrelief elements. If required, the closure can be supplied with external grounding device. For tightness testing the closure can be flash-tested with up to 150 kpa / 15 min. air pressure, using a valve inserted in the top shell. After the test the valve is replaced by a sealing screw. Kit Content Each closure package contains all the parts required for one straight joint Half shells with clamps 2 Cable strain reliefs incl. cable shield connections 3 Sealing wedges 4 Sealing tape 5 Half shell gasket 6 Cleaning cloth 7 Screws for sealing wedges 8 Dummy plugs 9 Wrap gauge 10 Grounding screws (not shown) 11 Shield connection leads 12 Installation instructions 32

32 Inline Closure UCA Dimensions, Capacities, Order Numbers, Accessories Dimensions, Capacities Type Dimensions [mm] Weight Cable Capacities in Pairs for Outer Inner Outer Outer [kg] Diameter Conductor Diameters Length Length Width Height [mm] 0.4 mm 0.6 mm 0.8 mm each closure UCA end 2 x to 18 UCA The stated splice capacities are obtained from the mean pair counts of the largest cables that can be inserted in each entry. each closure end 2 x to When selecting the size of the closure, one should always take into account the number of splices and the out-side diameters of the cables to be installed. Order Numbers Designation Delivery Unit Order Number UCA 3-6 with external grounding device 1 pc. S45754-A3-A13 UCA pc. S45754-A3-A12 UCA 4-9 with external grounding device 1 pc. S45754-A3-B14 UCA pc. S45754-A3-B15 Accessories Designation Delivery Unit Order Number Cable Branch-off Set for 10 branch cables incl. strain relief and shield connection - for UCA set S45756-M7-A4 - for UCA set S45756-M7-A1 Anti-Access Device - for UCA set S45756-M3-A3 - for UCA set S45756-M3-A2 Wall / Pole Mounting for UCA 3-6 and set S45756-M5-A2 Aerial Hanging Device for UCA 3-6 and set S45756-M5-A1 Desiccant 30 g 1 pc. S45056-M130-A2 System for Tightness Testing (valve, sealing plug, sealing paste) 10 sets S45756-M5-A7 Accessories for Encapsulating the Splice Designation Delivery Unit Order Number Drilling Tool 1 pc. S45407-A63-A1 Filling Compound (re-enterable) 500 g S45057-Z102-H10 Sealing Plug 1 pc. S45407-A62-A6 33

33 Inline Closure MHS M Description Design The lower half shell of the MHS M accommodates the cable splice. The upper half shell covers the splice area. At the ends of the shells two closing parts are used for covering the cable entry areas. In case of reopening only the upper half shell has to be removed whereas the cable entry areas remain unchanged. Sealing of incoming and outgoing cables is achieved using sealing tapes and one or two twists of tapes around the cable. The seams between the half shells and the closing parts are made watertight with sealing tapes, too. Application Straight and branching closure for non-pressurized copper cable networks with up to 4 cable entries per closure side. Application area: in manholes, in the ground, on poles and on aerial cables. Strain-relief elements prevent push in or pull out of the cables. These elements are placed beside the sealing elements and can be cut according to the cable diameters on site. The two half shells and the two closing parts are very tightly joined by non-corroding screws. Features Reliable sealing of the closure due to age-resistant, plastically sealing tapes Strain relief elements in the cable entry areas easily adapted to the cable diameters (onion ring system) External metal parts made of non-corroding material Quick and easy installation without the need for special tools or additional power source 34

34 Inline Closure MHS M Kit Content, Application, Order Numbers Kit Content 1 Upper half shell 2 Lower half shell 3 Closing part 4 Sealing and strain-relief elements 5 Sealing tapes round 6 Sealing tapes flat 7 Shield connection lead 8 Knife 9 Cleaning tissues 10 Closing screws 11 Branching kit (only for branching closure) 12 Measuring tape 13 Transparent film 14 Installation instructions Types, Application, Order Numbers Closure Type Application Cable Entries Cable Outlets Order Number MHS M 1 Straight closure 1 1 S45254-A30-A5 Branching closure* 1 2 S45254-A30-A6 Straight closure 1 1 S45254-A31-A7 MHS M 2 Branching closure* 1 2 S45254-A31-A8 Branching closure* S45254-A31-A9 Straight closure 1 1 S45254-A32-A7 MHS M 3 Branching closure* 1 2 S45254-A32-A8 Branching closure* S45254-A32-A9 * In addition to these standard branching closures it is also possible to configure branching closures with 2 or 3-4 cable entries. This requires the use of suitable sealing and strain-relief elements from the range of accessories and additional branching kits. The MHS M 1 permits a maximum of 2 cable entries. Branching Kit The standard branching closures contain branching kits for the cables to be branched. Each additional branching cable requires a further branching kit that has to be ordered separately. Contents: 1 bridging clip, 1 shield connection lead Designation Branching Kit Order Number S45755-M2-A2 35

35 Inline Closure MHS M Dimensions, Capacities Dimensions of Closure Case, Sheath Opening Closure Type Length [mm] Diameter [mm] Max. Sheath Opening [mm] Inside Outside Inside Outside MHS M MHS M MHS M Cable Entries: Number per Closure Side and Dimensions Closure Type Maximum Cable Diameter [mm] 1 Cable Entry 2 Cable Entries 3-4 Cable Entries MHS M MHS M MHS M Maximum Capacity / Pairs Closure Type Conductor Diameter Butt Connector* Inline Connector** Modular Connector 25 Pair [mm] [pairs] [pairs] [pairs] MHS M MHS M MHS M *) e.g. 3M UY2 **) e.g. AMP Picabond 36

36 Inline Closure MHS M Accessories Sealing and Strain-Relief Elements For Type Cable Order Number Entries MHS M 1 1 S45254-A1-R1 2 S45254-A1-R3 1 S45254-A2-R1 MHS M 2 2 S45254-A2-R S45254-A2-R16 1 S45254-A3-R1 MHS M 3 2 S45254-A3-R S45254-A3-R15 Tool Case Tools for installation of MHS M. Contents: 1 opening plate, 1 pliers, 1 ratchet wrench, 1 extension, 3 sockets, 1 crank, 1 scissors, 1 white marking pen. Designation Tool Case Order Number S45254-M2-A4 37

37 Inline Closure MHS M Accessories Opening Plate Tool for re-opening the MHS M. Designation Opening Plate Order Number S45254-A4-R12 Reclosure Set For reclosing opened closures. Contents: 1 set of sealing tapes (10 strips), 1 installation instruction. Designation Reclosure Set Order Number S45254-A4-R19 Pressure Test Set Set for short-duration tightness testing. Contents: 1 screwdriver with thread, 4 valves, 4 sealing rings. Designation Pressure Test Set Order Number S45254-A4-R1 38

38 Inline Closure MHS M Accessories Fixing Device For mounting the MHS M on walls or poles and for suspending from the messenger wires of aerial cables. Designation Fixing Device Order Number S45254-A4-R15 Grounding Device For external grounding. Designation Grounding Device (pack of 5) Order Number S45254-A4-R22 39

39 Distribution Closure BPR Description Design The housing of the BPR consists of 4 parts: lower half shell, two upper closing parts and one upper half shell. The lower half shell is equipped with 2 cable glands each on both sides for insertion of max. 4 subscriber cables. Glands not used are closed by means of dummy plugs which are part of the kit. Application Closure for non-pressurized cable networks, especially designed as a distribution closure for up to 10 subscriber cables, but also useable as in-line closures for low-paired distribution cables with up to 30 pairs. Use: in manholes, in buildings, in the ground, on poles and on aerial cables. Special Features Reliable solution for distribution of subscriber cables instead of terminals or boxes Insertion and sealing of subscriber cables by using cable glands Later insertion of subscriber cables possible at any time without influencing the cables already installed 8 cable gland versions available for all common subscriber cable types Sealing of the low-paired distribution cables by age-resistant sealing tapes No special tools required Closing screws made of non-corroding metal Each of the two upper closing parts is designed for accommodation of 3 cable glands. That means in connection with the 4 cable glands of the lower half shell 10 cable glands in total for the distribution of subscriber cables. These 10 glands are pre-installed with gland sealing parts 5.2 mm for cable diameter 4-6 mm. Gland sealings for other cable diameters or configurations are available. Sealing of the low-paired distribution cables is achieved using sealing parts in combination with sealing tapes placed in the lower half shell and in the two upper closing parts. In addition one or two twists of sealing tape around the cables ensure a reliable sealing of the cable entry area. An upper half shell is used to cover the closure. In case of re-opening only this half shell has to be removed. The cable entry areas are not influenced. The seams between the half shells and the closing parts are sealed with a special sealing element. All the parts of the BPR housing are tightened with non-corroding screws. As accessory a metal tray is available which can be installed on the bottom of the lower half shell. This tray is suitable to hold IDC connection strips or other devices. 40

40 Distribution Closure BPR Kit Content Kit Content 1 Cover 2 Lower half shell with 4 cable glands (2 on each side) 3 Closing parts including 3 cable glands each 4 Sealing and strain-relief parts for multi-pair cables 5 Strain-relief elements for subscriber cables 6 Sealing element 7 Sealing tapes 8 Dummy plug 9 Knife 10 Cleaning tissues 11 Closing screws 12 Wrench 13 Measuring tapes 14 Transparent film 15 Installation instructions 41

41 Distribution Closure BPR Dimensions, Application, Order Numbers Dimensions Inner Dimensions [mm] Outer Dimensions [mm] Length Width Height Length Width Height ,5 68 Application, Order Numbers Closure Type Application, Max. Cable Ø Order Number 1 Branching cable 10 Subscriber Cables* ) BPR 23 mm 14 mm S45254-A5-A6 *) For subscriber cables 8 gland sealings for the following cable diameters are available: Cable Ø Order Number 4-5 mm S45254-A6-R mm S45254-A6-R2 6-8 mm S45254-A6-R mm S45254-A6-R mm S45254-A6-R mm S45254-A6-R6 Two-wire cables S45254-A6-R7 Three-wire cables S45254-A6-R9 With the standard closure 10 gland sealings for cable diameters of 4-5 mm are delivered. 42

42 Distribution Closure BPR Accessories Wall Mounting Brackets Support For mounting the BPR on walls. Mounting Brackets Designation Wall Mounting Brackets No. 1 Support Order Number S45254-L20-A1 S45254-L20-A9 Messenger Strand Suspension For suspending the BPR from the messenger wires of aerial cables. Contents: Set with 2 mounting sets. Designation Messenger Strand Suspension Order Number S45254-A6-R10 Pressure Test Set Set for short-duration tightness testing. Contents: 1 screwdriver with thread, 4 valves, 4 sealing rings. Designation Pressure Test Set Order Number S45254-A4-R1 Metal Tray For fixing IDC connection strip or other devices. Designation Metal Tray Order Number S45254-A6-R14 43

43 Aerial Closure PEV Description Design The closure consists of two end caps and a closure tube. The end caps are split in two sections to take uncut cables. The cable entries are designed as ringshaped segments, like onion rings. They can easily be removed with a knife which is part of the kit. Each end cap has two cable entries. Sealing tape wrapped around the cables prevents ingress of water. Two plastic connection bars link the two end caps together. Application The free-breathing PEV closure is designed as a straight or branching closure on aerial cables. For use on cut and uncut cables. Mechanical forces from the cables are absorbed by serrated plastic parts which are connected with the end caps. These parts are pressed onto the cable sheaths by non-corroding metal hose clamps. The free-breathing split closure tube is closed by simply latching into position. The closure is fastened to the messenger wire by mounting devices. Features The PEV closure guarantees an excellent protection against climatic influences in tropical countries. The ventilation principle prevents humidity concentration, independent of air humidity and temperature changes. Cable entries individually adaptable on site Quick re-opening and re-closing without additional material For use on cut and uncut cables 44

44 Aerial Closure PEV Kit Content, Dimensions, Order Number Kit Content 1 Closure tube 2 End caps 3 Hose clamps 4 Sealing tapes 5 Measuring tape 6 Cleaning tissues 7 Knife 8 Screws 9 Serrated parts for strain relief 10 Connecting bars Mounting Device 1 Messenger wire clamps 2 Screws 3 Cable ties Dimensions, Order Number Type Dimensions [mm] Delivery Order Number Length Max. Ø Unit PEV kits S45254-A20-A1 45

45 Temporary Splice Protection Closures MEP Application The MEP closure is mainly used for temporary applications if cable splices have to be made only for a short time e.g. on construction sites, fair grounds or for cable repairs. They are also used if splices have to be sealed up to the final installation e.g. as overnight closure or under bad weather or environmental conditions. The use of MEP should not exceed 2 weeks in a manhole liable to flooding. Design Two half shells serve as splice housing. At the ends these half shells are filled with gel which forms a watertight seal around the incoming and outgoing cables. Additionally a gel sealing tape is wrapped around the cable to improve the sealing effect. The seams between the closure halves are also sealed by gel which is filled in grooves along the sides of the half shells. 1 To close the MEP the half shells are pressed together until they are latched. The MEP is fixed on the cables with cable ties. 2 Kit Content 3 1 Half shells 2 Gel sealing tape (one for MEP 1, two for MEP 2) 3 Cable ties Dimensions Type Usable Inner Length Total Outer Length Inner Diameter Outer Diameter [mm] [mm] [mm] [mm] MEP MEP Cable Diameters, Order Numbers Typ max. Cable Diameter Capacity Order Number [mm] [pairs] MEP S45254-A15-A1 MEP S45254-A16-A1 46

46 Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Description Design The reinforced closures have been developed to meet increased demands in cable networks. For this purpose, a PE net has been integrated in the heat-shrinkable sleeve. This considerably increases the split resistance during shrinking and its mechanical strength. The inner side of the sleeve is coated with hot-melt adhesive which guarantees a watertight and secure bonding to plastic and metal-sheathed cables. A temperature-sensitive paint on the sleeve indicates that sufficient heat has been applied to the sleeve. The closure kit consists of the heat-shrinkable reinforced sleeve with closing channel, a protective liner or a canister, a shield connection lead and installation accessories. Application GSC For non-pressurized cable networks - with flexible protective liner. Accessories for Branching Closures Branching kit in three different sizes which is required for each branching cable. GSC C For non-pressurized cable networks - with metal canister as protection for increased mechanical strength. GSC CP For pressurized cable networks - with metal canister and test valve. Special Features High split resistance due to integrated PE net Environmentally friendly sleeve composition out of PE laminate and PE net No ingress of water into the homogeneous composite material Very high mechanical strength of sleeve composite No cable strangulation due to regulated shrink force of the sleeve No overheating of cable conductors due to reduced heat during the shrinking process Insensitive to sharp flame settings 47

47 Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Kit Contents Kit Content GSC Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Cardboard liner 5 Laminated aluminum foil 6 Emery strip 7 Shield connection lead 8 Plastic adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Kit Content GSC C Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister 5 Emery strip 6 Shield connection lead 7 Plastic adhesive tape 8 Aluminum adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Kit Content GSC CP Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister with test valve 5 Nut and cover screw for valve 6 Aluminum adhesive tape 7 Plastic adhesive tape 8 Shield connection lead 9 Emery strip 10 Flame protection foil 11 Cleaning tissue 12 Installation instructions 48

48 Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Branching Kit, Dimensions, Order Numbers 1 Branching Kit One branching kit is required per branching cable. The kits are to be ordered separately. 2 3 Content 1 Branching clamp 2 Bridging clip 3 Shield connection lead Branching Kit Type For Closure Type Order Number A (small) S46896-A1-R33 GSC, GSC C B (medium) S46896-A1-R34 (for non-pressurized cables) C (large) S46896-A1-R35 BP (medium) GSC CP S46896-A1-R42 CP (large) (for pressurized cables) S46896-A1-R43 Dimensions and Order Numbers of Closures Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] GSC 43/ A S46896-A1000-A1 43/ A S46896-A1000-A30 55/ A S46896-A1005-A14 55/ A S46896-A1005-A1 75/ A S46896-A1006-A1 75/ A S46986-A1006-A2 75/ A S46896-A1006-A3 93/ B S46896-A1012-A1 93/ B S46896-A1012-A2 93/ B S46896-A1012-A3 120/ B S46896-A1016-A1 120/ B S46896-A1016-A2 120/ B S46896-A1016-A3 137/ C S46898-A1018-A1 137/ C S46896-A1018-A2 For GSC C and GSC CP, see next page 49

49 Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Dimensions, Order Numbers Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] GSC C 43/ A S46896-A1000-A3 43/ A S46896-A1000-A4 43/ A S46896-A1000-A31 75/ A S46896-A1006-A4 75/ A S46896-A1006-A5 75/ A S46896-A1006-A6 75/ A S46896-A1006-A38 93/ B S46896-A1012-A4 93/ B S46896-A1012-A5 93/ B S46896-A1012-A6 120/ B S46896-A1016-A4 120/ B S46896-A1016-A5 120/ B S46896-A1016-A6 160/ C S46896-A1027-A1 160/ C S46896-A1027-A2 200/ C S46896-A1031-A1 200/ C S46896-A1031-A2 GSC CP 62/ BP S46896-A2006-A1 62/ BP S46896-A2006-A2 62/ BP S46896-A2006-A3 62/ BP S46896-A2006-A9 93/ BP S46896-A2011-A1 93/ BP S46896-A2011-A2 93/ BP S46896-A2011-A3 120/ BP S46896-A2016-A1 120/ BP S46896-A2016-A2 120/ BP S46896-A2016-A3 120/ BP S46896-A2016-A9 160/ CP S46896-A2026-A1 160/ CP S46896-A2026-A2 160/ CP S46896-A2026-A9 200/ CP S46896-A2031-A1 200/ CP S46896-A2031-A2 200/ CP S46896-A2031-A5 50

50 Reinforced Heat-shrinkable Closure GSC Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] / / / / / / / / / / / / / /

51 Reinforced Heat-shrinkable Closure GSC C Capacities in Pairs Single Connectors 52 Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] / / / / / / / / / / / / / / /

52 Reinforced Heat-shrinkable Closure GSC CP Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] / / / / / / / / / / / / /

53 Standard Heat-shrinkable Closures SCX, SCX C Description Design In contrast to the closure series GSC the sleeves of the closures SCX and SCX C are not reinforced. The sleeve of these closures is made of one PE layer. The inner side of the sleeve is coated with hotmelt adhesive which guarantees a watertight and secure bonding to plastic and metal-sheathed cables. A temperature-sensitive paint on the sleeve indicates that sufficient heat has been applied to the sleeve. The closure kit consists of the heat-shrinkable sleeve with closing channel, a protective liner or a canister, a shield connection lead and installation accessories. Accessories for Branching Closures Application Branching kit in three different sizes which is required with branching closures for each branching cable. SCX For non-pressurized cable networks - with flexible protection liner. SCX C For non-pressurized cable networks - with metal canister as protection for increased mechanical strength. 54

54 Standard Heat-shrinkable Closures SCX, SCX C Kit Contents, Branching Kit Kit Content SCX 1 Heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Cardboard liner 5 Laminated aluminum foil 6 Emery strip 7 Shield connection lead 8 Plastic adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Closure Content SCX C Heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister 5 Emery strip 6 Shield continuity assembly 7 Adhesive tape 8 Aluminum adhesive tape 9 Flame protection foil 10 Cleaning cloth 11 Desiccant 12 Installation instructions 1 Branching Kit One branching kit is required per branching cable. The kits are to be ordered separately. 2 3 Content 1 Branching clamp 2 Bridging clip 3 Shield connection lead Branching Kit Type A (small) B (medium) C (large) Order Number S46896-A1-R33 S46896-A1-R34 S46896-A1-R35 55

55 Standard Heat-shrinkable Closures SCX, SCX C Dimensions, Order Numbers Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] SCX 43/ A S46896-A67-A100 43/ A S46896-A67-A101 43/ A S46896-A67-A102 43/ A S46896-A67-A103 75/ A S46896-A68-A184 75/ A S46896-A68-A186 75/ A S46896-A68-A187 75/ A S46896-A68-A188 93/ B S46896-A69-A100 93/ B S46896-A69-A159 93/ B S46896-A69-A / B S46896-A70-A / B S46896-A70-A / B S46896-A70-A / C S46896-A71-A / C S46896-A71-A101 SCX C 43/ A S46896-A67-A171 43/ A S46896-A67-A92 43/ A S46896-A67-A93 75/ A S46896-A68-A189 75/ A S46896-A68-A190 93/ B S46896-A69-A158 93/ B S46896-A69-A93 93/ B S46896-A69-A95 122/ B S46896-A70-A / B S46896-A70-A93 122/ B S46896-A70-A95 160/ C S46896-A72-A / C S46896-A72-A94 200/ C S46896-A72-A / C S46896-A72-A158 56

56 Standard Heat-shrinkable Closure SCX Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS2 AVL/MS2 AVL/MS2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] / / / / / / / / / / / / / / / /

57 Standard Heat-shrinkable Closure SCX C Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] / / / / / / / / / / / / / / /

58 Heat-shrinkable Wrap Around Repair Sleeves SCX R (Standard), GSC R (Reinforced) Description, Dimensions, Order Numbers Application SCX R / GSC R sleeves are used for repairing damaged plastic or metal cable sheaths or for providing corrosion protection. The sleeves are suitable for all types of non-pressurized cables in buried, ducted or aerial applications. Repair sleeves for pressurized cables on request. Design The sleeves are made of fully cross-linked polyolefin and on the inner surface coated with hot-melt adhesive which ensures a permanent and reliable sealing. In addition, the reinforced GSC R sleeves are equipped with a PE net embedded between the outer and inner sleeve layer. A flexible stainless steel channel is used to close the sleeve. This channel can be cut off after cooling down of the sleeve. Installation Dimensions, Order Numbers The sleeve is wrapped around the cable area to be repaired or protected. With the flame of a standard gas torch the sleeve is shrinked onto the cable sheath. Type Length Recommended Inner Diameter Order Number Application Range from to from to [mm] [mm] [mm] [mm] [mm] Standard-Sleeves SCX R SCX R S46898-A1236-A225 SCX R S46898-A1236-A226 SCX R S46898-A1236-A227 SCX R S46898-A1236-A228 SCX R S46898-A1236-A251 SCX R S46898-A1241-A225 SCX R S46898-A1241-A226 SCX R S46898-A1241-A227 SCX R S46898-A1241-A228 SCX R S46898-A1241-A269 SCX R S46898-A1250-A225 SCX R S46898-A1250-A226 SCX R S46898-A1250-A227 SCX R S46898-A1250-A228 SCX R S46898-A1250-A265 59

59 Heat-shrinkable Wrap Around Repair Sleeves SCX R (Standard), GSC R (Reinforced) Dimensions, Order Numbers Type Length Recommended Inner Diameter Order Number Application Range from to von bis [mm] [mm] [mm] [mm] [mm] SCX R S46898-A1256-A225 SCX R S46898-A1256-A226 SCX R S46898-A1256-A227 SCX R S46898-A1256-A228 SCX R S46898-A1256-A252 SCX R S46898-A1260-A225 SCX R S46898-A1260-A226 SCX R S46898-A1260-A227 SCX R S46898-A1260-A228 SCX R S46898-A1260-A253 Reinforced Sleeves GSC R GSC R S46898-A1236-A252 GSC R S46898-A1236-A253 GSC R S46898-A1236-A254 GSC R S46898-A1236-A255 GSC R S46898-A1236-A256 GSC R S46898-A1241-A270 GSC R S46898-A1241-A271 GSC R S46898-A1241-A272 GSC R S46898-A1241-A273 GSC R S46898-A1241-A274 GSC R S46898-A1250-A266 GSC R S46898-A1250-A267 GSC R S46898-A1250-A268 GSC R S46898-A1250-A269 GSC R S46898-A1250-A270 GSC R S46898-A1256-A253 GSC R S46898-A1256-A254 GSC R S46898-A1256-A255 GSC R S46898-A1256-A256 GSC R S46898-A1256-A257 GSC R S46898-A1260-A254 GSC R S46898-A1260-A255 GSC R S46898-A1260-A256 GSC R S46898-A1260-A257 GSC R S46898-A1260-A258 GSC R S46898-A1269-A221 GSC R S46898-A1269-A222 GSC R S46898-A1269-A223 GSC R S46898-A1269-A224 GSC R S46898-A1269-A225 60

60 Gas Torch Set Gas Torch Set The soldering and gas torch set is tailored to the requirements of processing heat-shrink components. The set comprises: Transport and storage box, pistol-grip fitting, torch tips LS 9, LS 30, LS 40, 6 m hose, wrench, gas lighter, steel cylinder 425 g, valve and refilling adapter. Designation Gas Torch Set Order Number 5VW8520 Spare parts for gas torch set on request. 61

61 62

62 Connection and Distribution Systems, Cabinets and Boxes 63

63 1001/2001 Series Distribution System Introduction Characteristics The 10-pair strips in the 1001/2001 Series have the following characteristics: 1001 Series: Cables and jumper sides equipped with basic IDC clamps 2001 Series: Jumper side with double IDC clamps and cable side with single IDC clamps: Implementation Options 1001/2001 Series strips are normally installed close to the subscriber, e.g. in Cross-connection cabinets Terminal distribution boxes Distribution boxes/cabinets uninterruptible jumpering Jumper side is higher than cable side: improved access to IDC clamps Wire Ø mm 3/5-point protection, front-pluggable Tools are not required for installing / removing strips 64

64 1001/2001 Series Distribution System 1001 Series Strips Cable side Jumper side 1001 Series Disconnection Strip Designation, Delivery Unit Order Number The IDC contact springs on the cable side always touch the contact springs on the jumper side. They are only separated when a disconnection plug is inserted. 10 Disconn. Strips C39104-A92-A63 2 Numbering Strips, 10 Color Marking S45755-B2-A1 Labels (DTAG* code compliance) Cable side Jumper side 1001 Series Connection Strip Designation, Delivery Unit Order Number The connection strip is equipped with clamps which extend from the cable side to the jumper side. Contact cannot be interrupted and switching cannot be triggered by inserting a protection connector. 10 Connection Str. C39104-A92-A64 2 Numbering Strips, 10 Color Marking S45755-B2-A3 Labels (DTAG* code compliance) Cable side Jumper side 1001 Series Switching Strip Designation, Delivery Unit Order Number The contact springs on the cable side do not touch the contact springs on the jumper side. Contact is only established when a protection connector is inserted. 10 Switch. Strips C39104-A92-A65 2 Numbering Strips, 10 Color Marking S45755-B2-A2 Labels (DTAG* code compliance) * Deutsche Telekom AG 65

65 1001/2001 Series Distribution System 2001 Series Strips Cable side 2001 Series Disconnection Strip Designation, Delivery Unit Jumper side Order Number The jumper side on the 2001 Series disconnection strip is equipped with double clamps for uninterruptible switching. Apart from this, the 2001 Series disconnection strip corresponds to its 1001 Series counterpart. 10 Disconn. Strips C39104-A92-A55 2 Numbering Strips, 10 Color Marking S45755-B2-A14 Labels (DTAG* code compliance) Cable side 2001 Series Connection Strip Designation, Delivery Unit Jumper side Order Number The jumper side on the 2001 Series connection strip is also equipped with double clamps for uninterruptible switching. Apart from this, the 2001 Series connection strip corresponds to its 1001 Series counterpart. 10 Conn. Strips C39104-A92-A51 2 Numbering Strips, 10 Color Marking S45755-B2-A4 Labels (DTAG* code compliance) Cable side 2001 Series Switching Strip Designation, Delivery Unit Jumper side Order Number The contact springs on the cable side do not touch the contact springs on the jumper side. Contact is only established when a protection connector is inserted. 10 Switch. Strips C39104-A92-A66 2 Numbering Strips, 10 Color Marking S45755-B2-A15 Labels (DTAG* code compliance) 66

66 1001/2001 Series Distribution System Grounding Strip, Dropwire Connection Strip Grounding Strip Designation, Delivery Unit Order Number All IDC clamps on the grounding strip are connected to the grounded mounting frame via a grounding comb. This ensures that all IDC contacts are connected to the ground potential. 1 Grounding Strip C39104-A92-A67 S45755-B2-A16 Jumper side Cable side Dropwire Connection Strip The dropwire connection strip is equipped with spring terminals on the cable side for dropwire subscriber cables (wire diameter mm). Apart from this, the dropwire connection strip corresponds to the 1001 Series connection strip. Designation, Delivery Unit 1 Dropwire Connection Strip C39104-A92-A1, 1 Color Marking Label (DTAG* code compliance) * Deutsche Telekom AG Order Number S45755-B2-A5 67

67 1001/2001 Series Distribution System Overvoltage / Overcurrent Protection a a' b b' Overvoltage Protection Plug* (3-point protection) Equipped with a 3-electrode arrester plus shortcircuit springs Wire pair protection Nominal response voltage 230 V Designation, Delivery Unit Order Number Overvoltage Protection Plug, 10 pcs. S45755-B2-A6 a a' b b' Overvoltage/Overcurrent Protection Plug* (5-point protection) Equipped with a 3-electrode arrester plus shortcircuit springs and two PTCs Wire pair protection Nominal response voltage 230 V Nominal response current 145 ma Designation, Delivery Unit Overvoltage/Overcurrent Protection Plug, 10 pcs. Order Number S45755-B2-A7 Grounding Bracket for Protection Plugs * A grounding bracket must be installed to ensure the connection from the protection plug to the ground potential. The frame must be correctly grounded. Designation, Delivery Unit Grounding Brackets, 10 pcs. Order Number S45755-B2-A8 68

68 /2001 Series Distribution System Overvoltage / Overcurrent Protection a a' b b' Overvoltage Protection Magazine (without arrester) Designation, Delivery Unit Order Number To be equipped with twenty 2-electrode arresters without a short-circuit spring Protection for 10 wire pairs Overvoltage Arrester Nominal response voltage 230 V Overvoltage Protection Mag., 10 pcs. S45055-B20-A10 Overvoltage Arrester, 1 pc. Q69-X224 For detailed information on protection methods in communications technology, refer to the "Overvoltage and Overcurrent Protection in Telecommunication Networks" (Order No. A45050-W3123-D7-X-7600). Dimensions of Strips with Protection, Installed in a Mounting Frame! 0 "! 0 " ' " " H = 27 mm or 54 mm " " H = 27 mm or 54 mm Mounting frame with strip and overvoltage protection magazine Mounting frame with strip and overvoltage or overvoltage/overcurrent plug 69

69 1001/2001 Series Distribution System Plugs, Marking Caps, Cords Plugs and Marking Caps Disconnection plugs (item 3 in picture) and dummy plugs (item 4) are available. Disconnection plugs are used to disconnect internal and external lines. Dummy plugs indicate connections which must be retained. Marking caps (item 1) are used to indicate special lines. They must be clamped between the IDC contacts The numbering strips and (item 2) are included in the strip scope of delivery. Type Description Color Order Number Disconn. Plug Has 2 tongues for disconnecting internal and external lines brown S45755-B2-A9 Dummy Plug Does not disconnect. Has 2 reeds for a wire pair, prevents inadvertent disconnection red S45755-B2-A10 Marking Caps For 1001 Series red, blue S45055-B20-R2 Marking Caps For 2001 Series red, blue S45055-B20-R1 Scope of delivery: each 10 pcs. Cords Test and connecting cords are available for implementing tests and measurements, and for jumpering at short notice. Connecting cord Test cord Type Length Order Number Test Cord, bi-polar, with 2 adapters for multiple-spring wire plugs 0.25 m S45055-A106-A3 Test Cord, bi-polar, with 2 adapters for multiple-spring wire plugs 1.50 m S45055-A106-A2 Test Cord, 4 poles, with 4 adapters for multiple-spring wire plugs 1.50 m S45755-B2-A11 Connecting Cord, bi-polar 1.50 m S45055-A106-A5 Connecting Cord, 4 poles 1.50 m S45755-B2-A12 Scope of delivery: each 1 pc. 70

70 1001/2001 Series Distribution System Tools Tools Only a few simple tools are required for wiring and technical service. Termination Tool For connecting wires Cutting device with lock for cutting back excess wire length Extraction hook for removing connected wires Designation Termination Tool Order Number C39407-A139-A13 Arrester Extraction Tool For inserting and removing arresters in the overvoltage protection magazine. Designation Arrester Extraction Tool Order Number C39407-A149-A8 71

71 1001/2001 Series Distribution System Mounting Frames, Cable Terminal Heads Mounting Frames Mounting frames are used to secure strips in main distribution frames, distribution boxes, etc. They can accommodate up to 30 strips with label frames and can be adjusted to the required length using a sidecutting pliers. The cables or wires are threaded through the holes provided. Wire protecting grommets can be ordered specially for this purpose. Designation Mounting Frame, Height 27 mm Mounting Frame, Height 54 mm Wire Protecting Grommet, 10 pcs. Order Number S45055-B20-R7 S45055-B20-R8 S45055-B20-R4 Cable Terminal Heads The cable terminal head is used to house up to 10 strips in a cross-connection cabinet. The cable terminal head is secured quickly and simply in the jumper frame of the cross-connection cabinet using four spikes with captive screws (included in scope of delivery). Designation Cable Terminal Head Order Number S45055-B20-A1 72

72 ! % 1001/2001 Series Distribution System Label Frames, Strip Dimensions Label Frame with Label Strip Used to identify mounting frames and cable terminal heads (see picture page 72). Designation Label Frame with Label Strip Label Strips, 10 pcs. Order Number S45055-B20-R6 S45055-B20-A4 Dimensions # ' % # ' %! " % % % Disconnection Strip 1001/2001 Series Connection Strip 1001/2001 Series Switching Strip 1001/2001 Series Grounding Strip Dropwire Connection Strip Length of the strips: 121 mm 73

73 1001/2001 Series Distribution System Technical Data Technical Data Contact principle observes DIN IEC 352 Insulation displacement connection to accommodate either 1 or 2 lines per IDC clamp Spring material Tin bronze Contact surface Ag (4-7 µm) Contact surface Module material Polycarbonate Suitable for: Cable side: 1001/2001 Series strips Solid conductor with a diameter of mm Outside diameter max. 1.4 mm (a solid conductor diameter 0.8 mm) Grounding strip Solid conductor with a diameter of 0.4 to max. 2.0 mm Dropwire connection strip Outside diameter max. 2.6 mm (with PE or PVC insulation) Jumper side: 1001/2001 Series strips and Solid conductor with a diameter of mm Dropwire connection strip Outside diameter max. 1.1 mm (with PE or PVC insulation) Service life with mm Ø 200 clampings with 0.8 mm Ø 50 clampings with max. 2.0 mm Ø (dropwire strip) 50 clampings Volume resistance at clamping point < 2 mohm (when new) (observes DIN EN ) < 3 mohm (in service) Dielectric strength observes (draft) DIN VDE > 2000 V eff Insulation resistance under lab. conditions observes (draft) DIN VDE > 5 x Ohm (when new) Surge voltage observes VDE 0433 > 2 kv (surge discharge 10/700 µs) 25/100/21 Max. cold -25 C Ambient conditions Dry heat +100 C observes DIN EN Humidity (constant) 21 days 74

74 Cross-Connection Cabinet KVz Application The weatherproof cross-connection cabinet is designed to accommodate cable terminal heads (page 72) at switching and distribution points in the communications network. As well as terminal heads, a range of other distribution components can be installed. If 1001/2001 Series connection and distribution strips are installed, up to 1200 wire pairs can be connected and distributed in the crossconnection cabinet. Cross-connection cabinets are normally mounted on a base. Cables are inserted into the cabinet through the base. Features of Cross-Connection Cabinet KVz 82 Cross-Connection Cabinet KVz 82 Plastic housing fiber-glass reinforced Door/backplane with structured DD enameling Rupture joints in the side walls so that several cross-connection cabinets can be connected in a row Frame for optical fiber distribution components with zinc coating (electrical conductivity) Base plate with rubber grommets Door stop (left or right, door swing 110º) Features of Base Cable base fiber-glass reinforced With/without ventilation Designation Weight Order Number [kg] Base for Cross-Connection Cabinet KVz 82 Cross-Conn. Cabinet 38 S45052-C1-A1 Base without Ventilation 28 S45052-Z31-A21 Base with Ventilation 28 S45052-Z31-A25 75

75 Wall-Mounted Distribution Enclosures/Boxes for 1001/2001 Series FM/K Wall-Mounted Distribution Enclosures Characteristics of FM/K Wall-Mounted Distribution Enclosures Compact distribution enclosure (sheet steel) Steel hood (2 mm sheet steel) Flanged panel with cable entry at the underside of the cabinet Grounding bar and cable support bar installed Mounting rail for module carriers and cable routing guides Painted in RAL 7032 IP 55 protection observes DIN EN 529/10.91 Distribution Designation Height Width Depth Weight Distance Enclosure/ between Vertical Box [mm] [mm] [mm] [kg] Rows Enclosure FM/K variable Enclosure FM/K variable Enclosure FM/K variable Enclosure FM/K variable Box FM/E variable Box FM/E variable Box FM/E variable Box FM/E variable Box FM/B variable Box FM/B variable Box FM/B variable 76

76 Wall-Mounted Distribution Enclosures/Boxes for 1001/2001 Series FM/E and FM/B Wall-Mounted Distribution Boxes Characteristics of FM/E Wall-Mounted Distribution Boxes Compact distribution box, fiber glass-reinforced with polycarbonate Pre-cut with PG for cable entry Paint RAL 7035 IP 66 protection observes DIN EN 529/10.91 Mounting plate and mounting kit included in scope of delivery Characteristics of FM/B Wall-Mounted Distribution Boxes Compact distribution box, fiber glass-reinforced with polycarbonate/polyester Cable insertion via rubber grommets Painted in RAL 7032 IP 64 protection observes DIN EN 529/10.91 Mounting frame for 1001/2001 Series strips included in scope of delivery Number of Max. Capacity Order Number Vertical Per Vertical Row Per Enclosure / Box Rows [10-paired Strips] [pairs] S45752-Z502-A S45752-Z502-A S45752-Z502-A S45752-Z502-A S45752-Z502-A15* S45752-Z502-A S45752-Z502-A S45752-Z502-A S45752-Z502-A S45752-Z502-A S45752-Z502-A21 Additional equipment variants are possible. *: Pack of 2 77

77 Accessories for Wall-Mounted Distribution Enclosures / Boxes Mounting Plate, PG-Threaded Cable Glands and PG Mounting Kits Mounting Plate for FM/E The mounting frames and distribution strips are attached to the mounting plate. The mounting plate is then installed in the distribution box. Suitable Delivery Weight Order Number for Unit [kg] FM/E1 10 pcs. 0,5 S45752-Z502-A150 FM/E2 10 pcs. 0,6 S45752-Z502-A151 FM/E3 8 pcs. 0,6 S45752-Z502-A152 FM/E4 4 pcs. 0,6 S45752-Z502-A153 PG-Threaded Cable Glands, Adapter Ring for FM/E The cables must be inserted into the box using PG cable glands so that the FM/E distribution boxes ensure IP 66 protection. In the distribution box, the smallest pre-cut hole for the cable gland is size 16. To insert cables with a smaller diameter (6-12 mm) into the distribution box, PG 13.5 cable glands must be installed using an adapter ring. Size Cable Ø Delivery Order Number [mm] Unit PG pcs. S45752-Z502-A161 PG pcs. S45752-Z502-A140 PG pcs. S45752-Z502-A141 PG pcs. S45752-Z502-A142 Adapt. Ring f.pg pcs. S45752-Z502-A146 PG Mounting Kits for FM/E The cables must be inserted into the box using PG mounting kits so that the FM/E distribution boxes ensure IP 54 protection. Size Cable Ø Deliv. Order Number [mm] Unit (Kit) PG pc. PG pc. PG pc. PG pc. PG pc. PG 29 quadruple stem 1 pc. S45752-Z502-A143 S45752-Z502-A144 78

78 Accessories for Wall-Mounted Distribution Enclosures / Boxes Hinge Set, Lock, Connection Kit Hinge Set for FM/E Used to convert the removeable cover into a hinged cover. Designation Hinge Set Order Number S45752-Z502-A Lock for FM/K Distribution Enclosure Used to retro-fit FM/K distribution enclosures. Designation Weight Order Number [kg] Lock 0,1 S46998-Z101-S26 Key 0,1 S46998-Z101-S27 Connection Kit for FM/E Used to connect a row or stack of FM/E distribution boxes. Size Cable Ø Delivery Order Number [mm] Unit Pg pcs. S45752-Z502-A155 Pg pcs. S45752-Z502-A156 Pg pcs. S45752-Z502-A157 79

79 80

80 Additional Information 81

81 Training Knowledge is precious which is why we pass it on As a leading manufacturer of communication cables, cable accessories and networks we are working with our customers to build communication bridges for the 21st century. We realize that the planning, installation and maintenance of cable systems involves comprehensive knowledge something we want to share with you as part of a genuine partnership. We do the training you get the profit Our worldwide knowledge in cable and network technology is channeled into our Training Center. On the basis of this knowledge, we develop diverse seminars for your staff. Training: expertise for your personnel Total solutions are becoming ever more important for communication networks. Of particular importance in this context are solutions for local networks (LANs) for use on customer premises, and in the carrier area (e.g. telecommunication, CATV IP net-works) because the future lies in the integration of speech, image and data. At the same time, as world-spanning information infrastructure grows, also the quality requirements to be met by networked communication solutions are growing. This demands knowledge knowledge that we can pass on to you. Our training is aimed at all those who set up or operate carrier or customer premise cable networks. By undertaking training before starting on a project you will avoid costly installation errors, and will put in place a critical prerequisite for the successful implementation of your project. Practical orientation, not theoretical dreams The balance is critical: theory is necessary, but practicality dictates what must be done. From their many years of practical experience, our trainers know which knowledge and skills are required for each task, and they are in constant contact with development, sales and projects engineering at Corning No-one can do everything but everything can be learned Techniques and products are subject to constant change. This makes it essential to have staff trained to the highest levels, who know how to utilize technical progress to your advantage. This can only be achieved by continuous training. We offer many different courses on our products, fiber optic cable splicing and measurement techniques. For information about current courses and dates please contact your local sales representative or visit our website at 82

82 Contacts Headquarters, Europe Headquarters Europe, Asia / Pacific, Africa: Kistlerhofstraße Munich GERMANY Tel.: Fax: Europe Germany Gross-Berliner Damm 82 a Berlin GERMANY Tel.: Fax: France S.A Favières FRANCE Tel.: Fax: Italy Via Cernaia, Torino ITALY Tel.: Fax: Spain Edificio Bronce, 4th Floor Plaza Manuel Gomez Moreno Madrid SPAIN Tel.: Fax: United Kingdom Fallows Way Whiston, Merseyside L35 1RZ ENGLAND Tel.: Fax:

83 Contacts Eastern Europe Eastern Europe Alexander Volk Regional Sales Director Eastern Europe Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: Alexander.Volk@corning.com Bosnia-Herzogovina Mr. Gabriel Coros Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: Gabriel.Coros@corning.com Bulgaria Pentacor Mr. Radoslav Naidenov 1606 Sofia, Iwailo 25-A, App Sofia Tel.: Mobile: Fax: Kazakhstan Siemens Kasachstan Mr. Oleg Lschuk Zharokov st Almaty Tel.: Latvia Siemens SIA Mr. Ivars Auza Viandes Iela Riga Tel.: / Mobile: Fax: ivars.auza@siemens.fi Poland ZWUT S.A. Mr. Dariusz Krol Ul. Zupnicza Warszawa Tel.: Fax: dariusz.krol@wan.oen.siemens.de Romania EMCOM Ltd. Mr. Ionel Lungu Calea Rahovei Sector 5 Bucharest Tel.: Fax: SMTP.ionel.lungu@wan.icn.siemens.de Russia Siemens OOO Dr. Evgenij Gutstein Ul. Malaya Kaluzhskaya Moscow Tel.: Mobile: Fax: evgenij.gutstein@mow.siemens.ru Serbia Siemens d.o.c. Mr. P. Pejic Knez Mihailova 30 Beograd Tel.: Fax: Ukraine Mr. Alexander Volk Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: Alexander.Volk@corning.com 84

84 Contacts Asia, South-East Asia, Australia Asia, South-East Asia, Australia Mr. Heinz-Josef Prediger Regional Sales Director Asia / Pacific Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: Heinz-Josef.Prediger@corning.com Mr. Henning Vogt Regional Sales Dir. South-East Asia / Australia Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: henning.vogt@corning.com Australia Corning Cables Australia Mr. Kevin Williams Main Road, Clayton 3168 Melbourne, Victoria Tel.: Mobile: Fax: williams@corningcables.com.au Bangladesh Siemens Bangladesh Ltd. Mr. Khaled Shams Jiban Bima Tower 12th Fl, 10 Dilkusha Commercial Area 1000 Dhaka Tel.: Mobile: Fax: sbl@bangla.net India SPCNL Mr. S.N. Bhat Plot No , Phase III Sector-20, Udyog Vihar Gurgaon/Haryana Tel.: Extn.: 720 Fax: , sn.bhat@ggn.spcnl.co.in Indonesia Malaysia SEE Mr. Roger Luckhardt 12th Floor, Menara Choy Fook On Jalan Yong Shook Lin Petaling Jaya, Selangor Tel.: Mobile: Fax: Roger.Luckhardt@see.siemens.com.my Philippines Siemens Inc. Ms. Nenette Eufemio 12/F Salcedo Towers 169 H.V.Dela Costa Street, Salcedo Village 1227 Makati City Tel.: Mobile: Fax: nenette.eufemio@siemens.com.ph Siemens Inc. Mr. Roberto B. Cuevas 12/F Salcedo Towers 169 H.V.Dela Costa Street, Salcedo Village 1227 Makati City Tel.: Mobile: Fax: robbie.cuevas@siemens.com.ph Singapore P.T. Siemens KO Mr. Jujian Sudarno Jl. Jend. A., Yani Kav. E 67-68, Pulmos Jakarta Tel.: Mobile: Fax: sudarnoj@sko-com.co.id SAE Mr. Albert Tan 164 Kallang Way 05-04, Kolam Ayer Industrial Estate Singapore Tel.: Mobile: Fax: albert.tan@sae.siemens.com.sg 85

85 Contacts Thailand, Vietnam, Greater China Thailand Siemens Ltd. Apirak Santipiromkul Charn Issara Tower II, 25th Floor, 2922/283 New Petchburi Rd, Bangkapi, Huaykwan, Bangkok Tel.: Mobile: Fax: apiraks@siemens.co.th Vietnam Focal Mr. Le Ngoc Thao Km 27 from HCMC, Highway 1, Ngai Thang, Binh An Thuan An District Bihn Duong Province Tel.: Mobile: Fax: lengoc.thao@sgn1.siemens.net Greater China Mr. Jianguo Xu Regional Sales Director Greater China Kistlerhofstraße Munich GERMANY Tel.: Fax: jianguo.xu@corning.com Hong Kong Corning Hongkong Ltd. Mr. Jerry Tse 34th F, Nanulife Tower, North Point Hong Kong Tel.: Fax: tsekl@corning.com Siemens Ltd. Mr. Hamann Ngai 58th F, Central Plaza, 18 Harbour Road Wanchai Hong Kong Tel.: Mobile: Fax: hamann.ngai@siemens.com.hk China Corning Shanghai Office Mr. Tinghong Yuan Room 3101, Lucky Target Square, 500 Chengdu Road North Shanghai Tel.: Fax: tinghong.yuan@corning.com Taiwan Transwave Mr. Tony Fang 12F, No. 257, Sec. 2, Hoping E. Road Taipei Tel.: Fax: transwav@ms6.hinet.net U-Tech Mr. C.L. Lu 2F, No.3, Alley 6, Lane 235, Paochiao Road Taipei-Hsien Tel.: Fax: uta@utech.com.tw 86

86 Contacts Africa & Middle East Africa & Middle East Mr. Oben Uluc Regional Sales Director Africa & Middle East Kistlerhofstraße Munich GERMANY Tel.: Mobile: Fax: Uluc.Oben@corning.com Algeria Siemens Bureau d Alger Mr. Aassim Berkane 5, rue Mohammed Saadi Souag, B.P Hydra Tel.: Fax: Kingdom of Saudi Arabia Beit Al Etisalat Mr. Bernd Pannek P.O.Box Riyadh Tel.: Ext.555 Mobile: Fax: corning_pannek@hotmail.com South Africa Electhem Electrical Services Mr. Günter Hemetsberger La Lucia Glades Office Park, 1st Floor, Building 3 74, Armstrong Avenue 4321 La Lucia, KWA-Zulu Natal Tel.: Mobile: Fax: guenter.hemetsberger@electhem.telecom.at Turkey Siemens Fiber Optik Kablolari Ltd. Sti. Mr. Cemal Sadiki Iplikdere Mevkii, Güzeltepe Köyü 849, Ada 2-3 Parsel Gebze / Kocaeli Tel.: Mobile: Fax: cemal.sadiki@sfok.com.tr Siemens Fiber Optik Kablolari Ltd. Sti. Ucgen Plaza No. 7, Kat: 4 Cayiryolu Sokak Icerenköy-Istanbul Tel.: Fax:

2178-L/S Series Fiber Optic Splice Case with Gasket

2178-L/S Series Fiber Optic Splice Case with Gasket 2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents

More information

Customer-Owned Outside Plant

Customer-Owned Outside Plant Customer Premises Products (Enterprise) 3 Customer-Owned Outside Plant Fiber Optic Splice Case 2178 Series and Accessories 372 Fiber Optic Dome Splice Closure FD Series 376 Fibrlok II Universal Optical

More information

3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR

3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR 3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR Instructions July 2010 78-8135-0094-5-K 3 1.0 General 1.1 3M Fiber Optic Splice Closure 2178-XSB The

More information

2179-CD Series Fiber Optic Splice Closure. Installation Instructions

2179-CD Series Fiber Optic Splice Closure. Installation Instructions 2179-CD Series Fiber Optic Splice Closure Installation Instructions 1.0 Product Introduction The new 3M TM 2179-CD Series Fiber Optic Splice Closure can be used in buried, underground, aerial, and pedestal

More information

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions September 2017 78-8130-5055-2-M 2 September 2017 78-8130-5055-2-M 1.0 Kit Contents 2.0 General...

More information

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR

3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR 3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions July 2010 3 1.0 Contents 1.0 General...3 2.0 Kit Contents...3 3.0 Cable Preparation...4 4.0

More information

SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1

SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1 Fiber Optic Splice Closure 1. Introduction 1.1 General SAMJIN s SJOF-BS604B protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct buried

More information

FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N

FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General

More information

3M Distribution Box (DDB)

3M Distribution Box (DDB) 3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure

More information

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements. FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories

More information

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)

More information

3M Better Buried Compound Compression Closure System

3M Better Buried Compound Compression Closure System 3M Better Buried Compound Compression Closure System Instructions March 2016 78-0015-2948-2-A Contents: 1.0 General...3 2.0 Kit Contents...3 3.0 Closure Selection Guide...4 4.0 LHS End Cap Installation...5

More information

2178 Fiber Optic Splice Case and 2181 Cable Addition Kit

2178 Fiber Optic Splice Case and 2181 Cable Addition Kit 2178 Fiber Optic Splice Case and 2181 Cable Addition Kit Instructions January 1994 Issue 1, 34-7029-6387-6 1 2 Contents: 1.0 General... 4 2.0 Specifications... 4 3.0 Kit Contents... 5 SECTION 1: 2178 Splice

More information

Connectivity accessories by Nestor Cables

Connectivity accessories by Nestor Cables Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com

More information

FOSC 450 C6 and D6 Closures

FOSC 450 C6 and D6 Closures FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division

More information

Splice Closure Fiber (SCF) Family

Splice Closure Fiber (SCF) Family features and benefits Sealed butt-style closure Aerial, wall, pole, direct buried Ribbon reel-end to reel-end splicing Split end caps Modular fiber management system standards Telcordia GR-771 tested RDUP

More information

3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462-FN and 3M High Gel Re-enterable Encapsulant 8882)

3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462-FN and 3M High Gel Re-enterable Encapsulant 8882) 3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462FN and 3M High Gel Reenterable Encapsulant 8882) Instructions April 2016 78813509979C Contents: 1.0 General... 1 2.0 Kit Contents...

More information

3M Fiber Optic Splice Closure 2178-L/S Series with Gasket

3M Fiber Optic Splice Closure 2178-L/S Series with Gasket 3M Fiber Optic Splice Closure 2178-L/S Series with Gasket Instructions for: 3M Fiber Optic Splice Closures 2178-L/S Series 3M Flame Retardant Fiber Optic Splice Closures 2178-L/S/FR 3M Cable Addition Kit

More information

2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table

2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table FIST-GCO2-F INSTALLATION INSTRUCTION GCO2-FC GCO2-FD Content 1 Introduction 2 General 2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table 3 Installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS LIGHTGUARD 350-20-WTC SEALED FIBER OPTIC CLOSURE VIEW ONLINE TABLE OF CONTENTS: GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...3 PACKAGE CONTENTS: ACCESSORIES...3 RECOMMENDED TOOLS...3 ADD-ON COMPONENTS...4

More information

FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays

FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and

More information

Quante BPEO Splice-Protection Closure for Optical Fiber Cables. Features Advantages Benefits

Quante BPEO Splice-Protection Closure for Optical Fiber Cables. Features Advantages Benefits 3 Quante BPEO Splice-Protection Closure for Optical Fiber Cables BPEO: Fully Mechanical, Easy to Install, No Specific Tools BPEO is the newest generation of watertight spliceprotection closures for optical

More information

3 Foam Sealed Closure 2" (50 mm) with Compound Compression

3 Foam Sealed Closure 2 (50 mm) with Compound Compression 3 Foam Sealed Closure 2" (50 mm) with Compound Compression Instructions 1.0 General 1.1 The 3M Foam Sealed Closure is designed to be used in the construction and maintenance of buried and underground PIC

More information

DOME OPTIC SPLICE CLOSURE

DOME OPTIC SPLICE CLOSURE FIBER OPTIC SPIICE CLOSURE GJS-JKDH1001-120 BOX DIMENSION: W=140mm H=340mm Weight = 1.80 kgs Outer Internal structure Fuse fiber disc Type sealing ring Plastic hoop base Pole Mount Pole Mount 1 1. product

More information

Gel-sealed in-line fiber optic closure

Gel-sealed in-line fiber optic closure SCIL-C Gel donut INSTALLATION INSTRUCTION TC-1363-1-IP Rev A, Oct 2017 www.commscope.com Gel-sealed in-line fiber optic closure Contents 1 General 2 Sizing and product kit information 3 Installation conditions

More information

Medium Box for Cable Termination

Medium Box for Cable Termination FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling

More information

SLiC Fiber Aerial Closure System

SLiC Fiber Aerial Closure System 3 SLiC Fiber Aerial Closure System SLFC 533-SP SLFC 533-TS SLFC 733-SP Instructions May 2005 78-8135-4502-3-B N C H E S R A N G E M IL L IM E T E R S.4 10.6.8 A B C 15 20 I 1.0 Kit Contents Note: Examine

More information

3 SLiC Aerial Closure with Rubber End Seal

3 SLiC Aerial Closure with Rubber End Seal 3 Aerial Closure with Rubber End Seal Instructions 1.0 General 1.1 This instruction bulletin describes the assembly of the 3M Aerial Closure with external bonding hanger brackets. These closures are suitable

More information

COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x cm cm x cm)

COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0 x 22 8.5 x 22 (15.24 cm x cm cm x cm) OCTOBER 2004 COYOTE CLOSURE FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (15.24 cm x 55.88 cm 21.59 cm x 55.88 cm) Be sure to read and completely understand this procedure before applying

More information

FOSC 400. Ordering Guide For Closures and Accessories. Section I 3. Section II 5. Section III 9. Section IV 11. Section V 15

FOSC 400. Ordering Guide For Closures and Accessories. Section I 3. Section II 5. Section III 9. Section IV 11. Section V 15 FOSC 400 Ordering Guide For Closures and Accessories Section I 3 How to Order FOSC 400 Closures Section II 5 How to Order Accessories for FOSC 400 Closures Section III 9 Other FOSC Fiber Optic Splice Closures

More information

3M Better Buried Closures

3M Better Buried Closures 3M Better Buried Closures Instructions March 2016 78-0015-2945-8-A Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Closure Selection Guide... 4 4.0 LHS End Cap Installation... 5 5.0 Cable Preparations...

More information

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC

More information

3M Fiber Optic Closure System LL

3M Fiber Optic Closure System LL 3M Fiber Optic Closure System LL 3M Fiber Optic Closure System The 3M Fiber Optic Closure System LL provides a protective yet accessible environment for housing single or mass fusion fiber splices. The

More information

2178 L/S Series Fiber Optic Splice Cases and Accessories

2178 L/S Series Fiber Optic Splice Cases and Accessories 2178 L/S Series Fiber Optic Splice Cases and Accessories The 3M 2178 Fiber Optic Splice Case family has always given you great protection for fiber optic connections. Now, the addition of 3M 2178-L/S Series

More information

Fiber Optic Splice Closure GPJ Instruction Manual

Fiber Optic Splice Closure GPJ Instruction Manual Fiber Optic Splice Closure GPJ09-9401 Instruction Manual 1. Brief Introduction GPJ09-9401 type of Fiber Optic Splice Closure is a member in dome series, the main function is to provice direct pass, branch

More information

FOSC-450 Product Range Ordering Guide

FOSC-450 Product Range Ordering Guide of the Gel Sealed Splice Closure (FOSC-450) 1 Product description 2 2 Ordering information 3 2.1 Basic FOSC closures 3 2.2 FOSC closure accessories 4 3 Product guide 5 3.1 Closure description 5 3.2 Closure

More information

SPECIFICATION. Spec No : VSS-1402-CS603B

SPECIFICATION. Spec No : VSS-1402-CS603B SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic

More information

3M Fiber Closures BPEO

3M Fiber Closures BPEO 3M Fiber Closures BPEO 2 3M Fiber Closures BPEO The 3M Fiber Closures BPEO are designed with flexibility in application in mind. With a range of sizes, they can be deployed above grade (pole, facade) or

More information

The FiberMark1 offers an ideal solution for

The FiberMark1 offers an ideal solution for Large Capacity Fiber Optic Splice Enclosure The Ideal Solution For Large Capacity Voice, Data, and Video Splicing Requirements. The FiberMark1 offers an ideal solution for larger fiber capacity voice,

More information

Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]

Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto] Fiber Optic Splice Closure GPJ09-8205 Instruction Manual [Escribir texto] 0 Table of Contents 1. General Introduction 2 2. Specification 2 3. Structure 2 4. Installation instructions. 4 5. Operation procedure.

More information

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24

More information

Optical Distribution Box 300 Installation Guide. Version : R0.0

Optical Distribution Box 300 Installation Guide. Version : R0.0 Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be

More information

Ordering Guide of the Fiber-Optic Splice Closure (FOSC-400)

Ordering Guide of the Fiber-Optic Splice Closure (FOSC-400) Page 1 of 11 Ordering Guide of the Fiber-Optic Splice Closure (FOSC-400) This document provides assistance with the selection of FOSC-400 closures. It includes the following sections: 1 Product description

More information

OFDC-B8-72. Outdoor fiber distribution closure. 6 Closing. Content 1 Introduction. 7 Re-entry. 2 Kit content. 3 Closure preparation

OFDC-B8-72. Outdoor fiber distribution closure. 6 Closing. Content 1 Introduction. 7 Re-entry. 2 Kit content. 3 Closure preparation OFDC-B8-72 I N S T A L L A T I O N I N S T R U C T I O N Outdoor fiber distribution closure Content 1 Introduction 2 Kit content 3 Closure preparation 4 Cable preparation 4.1 Feeder cable 4.2 Drop cable

More information

FIST-GCO2-OTIAN I N S T A L L A T I O N I N S T R U C T I O N

FIST-GCO2-OTIAN I N S T A L L A T I O N I N S T R U C T I O N FIST-GCO2-OTIAN I N S T A L L A T I O N I N S T R U C T I O N 24 Address Point Fibre distribution point (FDP) Installation guide for fibre DP Contents 1 Kit Contents 2 Accessories 3 MOBRA installation

More information

3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series

3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series 3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series Instructions Voltage Rating: 1000 V, Temperature Rating: 90 C Kit Contents 78-R1 78-R2 78-R3 78-R4 78-R5 Sleeve Set 1 1 1 1

More information

3A TC 699/SIP/UK/12

3A TC 699/SIP/UK/12 Hybrid OTIAN Node I N S T A L L A T I O N I N S T R U C T I O N Generic Joint 3A - Item Code 006825 TC 699/SIP/UK/12 07/15 - Helpline 01793 572453 Contents 1 General description 2 Capacity 3 Kit contents

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 260513 - MEDIUM-VOLTAGE CABLES PART 1 - GENERAL 1.1 SUMMARY A. Section includes cables and related cable splices, terminations, and accessories for mediumvoltage (2001 to 35,000 V) electrical distribution

More information

SPECIAL SPECIFICATION 6559 Telecommunication Cable

SPECIAL SPECIFICATION 6559 Telecommunication Cable 2004 Specifications CSJ 0015-09-147, etc. SPECIAL SPECIFICATION 6559 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing, training,

More information

Public Works Division Lighting District Fiber Optic Specifications April 2009

Public Works Division Lighting District Fiber Optic Specifications April 2009 Public Works Division Lighting District Fiber Optic Specifications April 2009 7000 Florida Street Punta Gorda, Florida 33950 Tele: 941.575.3600 Fax : 941.637.9265 www.charlottecountyfl.com/publicworks

More information

e-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service)

e-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service) R e-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service) Optical Fiber Drop wire Closure Model FOC-CB1612-24DW. Available with optical fiber cable from 12 up to 24 fibers

More information

3M Pressurized Closure System 2-Type 505

3M Pressurized Closure System 2-Type 505 Communication Markets Division 3M Pressurized Closure System 2-Type 505 The 3M Pressurized Closure System 2-Type 505 is a complete, pressuretight, re-enterable closure system for enclosing spliced connections

More information

SPECIAL SPECIFICATION 8540 Telecommunication Cable

SPECIAL SPECIFICATION 8540 Telecommunication Cable 2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,

More information

Ordering Guide. for FIST-GCO2 product range

Ordering Guide. for FIST-GCO2 product range Ordering Guide for FIST-GCO2 product range Page 1 of 18 Ordering Guide of the Generic Closure Organizer (FIST-GCO2) This document provides assistance with the selection of FIST Generic Closure Organizers

More information

Ordering Guide of the Generic Closure Organizer (FIST-GCO2)

Ordering Guide of the Generic Closure Organizer (FIST-GCO2) Page 1 of 26 Ordering Guide of the Generic Closure Organizer (FIST-GCO2) This document provides assistance with the selection of FIST Generic Closure Organizers (FIST-GCO2) for use in FIST applications.

More information

FOSC-450D. Fiber Optic Splice Closure. 1 Introduction. Content. 5 Cable termination. 6 Fiber routing. 2 General. 7 Installation of the gel block

FOSC-450D. Fiber Optic Splice Closure. 1 Introduction. Content. 5 Cable termination. 6 Fiber routing. 2 General. 7 Installation of the gel block FOSC-450D I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories 2.4 Capacity 3 Preparation of the closure 4

More information

27mm ECAM Double Cable Entry Port

27mm ECAM Double Cable Entry Port 27mm ECAM Double Cable Entry Port Instructions October 2006 1.0 Introduction The 3M 27mm ECAM Double Cable (External Cable Assembly Module) Entry Port is designed to accept fiber optic loose tube & central

More information

Instruction manual. Midi Fiber Dome. Instruction manual

Instruction manual. Midi Fiber Dome. Instruction manual Midi Fiber Dome Instruction manual Product contents: - 1x Midi Fiber Dome - 1x Window Cut port seal - 1x sealing rubber (long) - 4x sealing rubber (short) - 4x stainless steel screw 4 x 25 T20-6x dummies

More information

SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE

SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE SP-CTN-CT3000M,CT3000ML-00 ISSUED : 2015/02/11 PAGE : 8 SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE CT3000M/CT3000ML Fiber Optic Splice Closure 2 / 8 1. GENERAL This specification covers the standards

More information

K & B Flame Retardant Building Riser Closures

K & B Flame Retardant Building Riser Closures K & B Flame Retardant Building Riser Closures September 1995 Issue 1, 34-7016-7030-8 1. General 1.1 3M Brand K&B Building Riser Closures are designed for use in building riser closets and may be positioned

More information

Scotchlok Connectors and Tools

Scotchlok Connectors and Tools Scotchlok Connectors and Tools Proven Solutions For Today s Applications A New Series of Tools and Connectors from 3M. Over 45 years ago, 3M introduced the industry s original insulation displacement connector

More information

Furcation of a Central Tube Ribbon, Gel-Free, Non-Armored, 96- to 192-Fiber Cable into an OSE-UD

Furcation of a Central Tube Ribbon, Gel-Free, Non-Armored, 96- to 192-Fiber Cable into an OSE-UD Furcation of a Central Tube Ribbon, Gel-Free, Non-Armored, 96- to 192-Fiber Cable into an OSE-UD P/N 004-277-AEN Issue 1 related literature Search www.corning.com/opcomm. Click on Resources. 1. Initial

More information

STB Distribution Box Screw or IDC Type Indoor DP Outdoor DP Wall & Pole DP Pillar DP

STB Distribution Box Screw or IDC Type Indoor DP Outdoor DP Wall & Pole DP Pillar DP Distribution Boxes STB Distribution Box Screw or IDC Type Indoor DP Outdoor DP Wall & Pole DP Pillar DP BOOK 1.indd 27 9/22/10 7:22:14 PM STB Distribution Box for Telecommunication 2 Pair Distribution

More information

TRANSMISSION ENGINEERING STANDARD TES-P , Rev. 0 TABLE OF CONTENTS 1.0 SCOPE 2.0 CABLES SPLICES

TRANSMISSION ENGINEERING STANDARD TES-P , Rev. 0 TABLE OF CONTENTS 1.0 SCOPE 2.0 CABLES SPLICES 1.0 SCOPE TABLE OF CONTENTS 2.0 CABLES SPLICES 2.1 Definitions 2.2 Scope of Specifications and Drawings 2.3 General Requirements 2.4 Routing Cables 2.5 Connectors 2.6 Conductor Connections 2.7 Heat Shrinkable

More information

FOSC 400 A4 Fiber Optic Splice Closure

FOSC 400 A4 Fiber Optic Splice Closure FOSC 400 A4 Fiber Optic Splice Closure I N S T A L L A T I O N I N S T R U C T I O N 1. General Product Information This installation practice provides instructions for installing Tyco Electronics FOSC

More information

Ordering Guide of the Generic Closure Organizer (FIST-GCO2)

Ordering Guide of the Generic Closure Organizer (FIST-GCO2) Page 1 of 18 Ordering Guide of the Generic Closure Organizer (FIST-GCO2) This document provides assistance with the selection of FIST Generic Closure Organizers (FIST-GCO2) for use in FIST applications.

More information

SLiC Fiber Aerial Closure 533 and 733

SLiC Fiber Aerial Closure 533 and 733 SLiC Fiber Aerial Closure 533 and 733 3M s SLiC fiber aerial closures are designed to enable service providers to costeffectively deploy aerial fiber networks in the access network (FTTN, HFC, and FTTP).

More information

Installation instructions Cable transit device Roxtec RS ES Ex

Installation instructions Cable transit device Roxtec RS ES Ex General information Installation and maintenance: For European member countries of GENELEC, shall standard EN 60079-14 and EN 60079-17 be considered. For countries members of IECEx shall standard IEC 60079-14

More information

Communication Markets Division. 3M Fiber Closures. Smart design makes your job easier.

Communication Markets Division. 3M Fiber Closures. Smart design makes your job easier. Communication Markets Division 3M Fiber Closures Smart design makes your job easier. 2 Your connections deserve the best protection. No matter the size and configuration of your network, protecting its

More information

Built tough for long-term connections

Built tough for long-term connections Communication Markets Division 3M Scotchlok Connectors Built tough for long-term connections 2 3 Durable, insulated connections on the first crimp. Over 50 years ago, 3M introduced the industry s original

More information

Built tough for long-term connections

Built tough for long-term connections Communication Markets Division 3M Scotchlok Connectors Built tough for long-term connections 2 3 Durable, insulated connections on the first crimp. Over 50 years ago, 3M introduced the industry s original

More information

Multi-Media Installation Guide

Multi-Media Installation Guide Multi-Media Installation Guide Coaxial Page 2 Data Plug Page 7 Data Jack Page 10 Telephone Page 13 Splicing Page 15 Cable Types Cable Types Two basic types of cable are used in multimedia installations.

More information

3 Cold Shrink Products

3 Cold Shrink Products 3 Cold Shrink Products Low Voltage Splices 0-600V (1000V rated) 279 Cold Shrink Splices (0-1000V) 279 Cold Splicing Products 279 Resin Splices 0-600V (1000V rated) 281 Resin 284 3M 8420 and 8430 Series

More information

Low Voltage Splices, 1000 V or less

Low Voltage Splices, 1000 V or less For installations from 120 V to 1 kv, 3M offers several low voltage splice options, including 3M-developed cold shrink technology, heat shrink, resin and tape. 3M Low Splices are reliable in buried, overhead,

More information

Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables

Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables Product group 1 Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard

More information

Installation instructions Roxtec RM PE B

Installation instructions Roxtec RM PE B Installation instructions Roxtec RM PE B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Plastic film Conductive

More information

Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces

Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................

More information

Installation instructions Roxtec RM ES B

Installation instructions Roxtec RM ES B Installation instructions Roxtec RM ES B Environmental side Termination/ interior side Pipe Cable screen/armor Layers Termination/ interior side Cable sheath Layers Environmental side Vertical screen Plastic

More information

FOSC 400 B2/B4. Fiber Optic Splice Closures. Table of Contents. Page 1

FOSC 400 B2/B4. Fiber Optic Splice Closures. Table of Contents. Page 1 FOSC 400 B2/B4 I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closures Table of Contents Page 1. General Product Information 2 2. Warnings 3 3. Required Tools and Materials 3 4. Standard

More information

FOSC 400. Fiber Optic Splice Closures

FOSC 400. Fiber Optic Splice Closures FOSC 400 Fiber Optic Splice Closures FOSC 400 - Fiber Optic Splice Closures The FOSC name is synonymous with excellence in sealing, fiber management, ease of use and design flexibility. The original FOSC

More information

MiniXtend Cable with Binderless* FastAccess Technology Jacket and Buffer Tube Removal Procedures. 1. General. 2. Precautions

MiniXtend Cable with Binderless* FastAccess Technology Jacket and Buffer Tube Removal Procedures. 1. General. 2. Precautions MiniXtend Cable with Binderless* FastAccess Technology Jacket and Buffer Tube Removal Procedures 004-273-AEN, Issue 2 Table of Contents 1. General.... 1 2. Precautions.... 1 2.1 Cable Handling Precautions...

More information

19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43

19 TiRAX cabinet system. from page 3. 19 NETcell cabinet system from page 31. Open 19 racks from page 43 19" TiRAX cabinet system from page 3 19" NETcell cabinet system from page 31 Open 19" racks from page 43 all-mounting/stand-alone distribution systems from page 53 all-mounting enclosure systems from page

More information

Emtelle Aerial Blown Fibre

Emtelle Aerial Blown Fibre Emtelle Aerial Blown Fibre Solution Overview For Span Lengths of between 30-60 metres Only One Tube Bundle between Poles A Joint Closure can be added every 5 poles or more depending on housing density

More information

RetractaNet XS. Extractable Solutions for OSP. October 2012

RetractaNet XS. Extractable Solutions for OSP. October 2012 RetractaNet XS Extractable Solutions for OSP October 2012 OSP Solutions RetractaNet XS Solution Simple concept reduces the need for skilled labor for installation Easy direct buried deployment in soft

More information

Instructions. Cable with Armor F CAUTION. October Rev A

Instructions. Cable with Armor F CAUTION. October Rev A 3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables

More information

FOSC 400. Fiber Optic Splice Closure. Features

FOSC 400. Fiber Optic Splice Closure. Features The FOSC name has been synonymous with excellence in sealing, fiber management, ease of use, and design flexibility since the FOSC 100 closure was first introduced in 1986. FOSC closures have always been

More information

www.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~

More information

FOSC 400 C5 & D5 Fiber Optic Splice Closures

FOSC 400 C5 & D5 Fiber Optic Splice Closures FOSC 400 C5 & D5 Fiber Optic Splice Closures I N S T A L L A T I O N I N S T R U C T I O N 1. General Product Information The FOSC 400 C5 and D5 closures are combination cable closures and splice organizers,

More information

SECTION 4 TABLE OF CONTENTS

SECTION 4 TABLE OF CONTENTS Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for

More information

IP-LINX. Installation Guide

IP-LINX. Installation Guide Installation Guide Installation Guide, 146653-4 Copyright 2017, Telect, Inc. All Rights Reserved Telect and Connecting the Future are registered trademarks of Telect, Inc. 22425 East Appleway Ave. # 11

More information

3M Fiber Optic Splice Closure 2178 Family. Flexible Fiber. Management Solutions

3M Fiber Optic Splice Closure 2178 Family. Flexible Fiber. Management Solutions 3M Fiber Optic Splice Closure 2178 Family Flexible Fiber Management Solutions More flexibility for your complex fiber optic network A full line of closures and accessories designed to protect fiber optic

More information

Up to 85% higher Service Life due to efficient sealing method.

Up to 85% higher Service Life due to efficient sealing method. Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348

More information

HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/

HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/ Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable

More information

Communication Markets Division 3M Scotchlok Connectors and Tools. Proven. Solutions for. Today s Applications

Communication Markets Division 3M Scotchlok Connectors and Tools. Proven. Solutions for. Today s Applications Communication Markets Division 3M Scotchlok Connectors and Tools Proven Solutions for Today s Applications A Proven Series of Tools and Connectors from 3M. 50 years ago, 3M introduced the industry s original

More information

IP-LINX Fiber :: X-XXXX

IP-LINX Fiber :: X-XXXX Fiber :: 055-797X-XXXX User Manual Telect, Inc. All rights reserved. 146653-A0 Table of Contents Chapter 1: Introduction...3 1.1 Tools Required...3 1.2 Additional Parts...3 1.3 Assemblies...3 Chapter 2:

More information

18mm ECAM Cable Entry Port

18mm ECAM Cable Entry Port 18mm ECAM Cable Entry Port Instructions October 2006 1.0 Introduction The 3M 18mm ECAM (External Cable Assembly Module) Cable Entry Port Kit is designed to accept fiber optic cables with external diameters

More information

3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket

3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M SLiC 530/533/733-2 Port-MSM 0.61 Cable Entry Bracket For use with 3M SLiC Free-Breathing Fiber Optic Closures and Terminals Instructions November

More information

Grounding-type plugs and sockets K Product information

Grounding-type plugs and sockets K Product information Product information Plugs and sockets for harsh conditions. SCHUO by MENNEES with the hammer symbol. Acc. to VDE 0105 part 115. Made of high-grade AMAPLAST. Acc. to VDE 0620 for harsh conditions. Application

More information

Flexible Fiber Management Solutions

Flexible Fiber Management Solutions Communication Markets Division 3M Fiber Optic Splice Closure 2178 Family Flexible Fiber Management Solutions More flexibility for your complex fiber optic network A full line of closures and accessories

More information