RS-232 Protocol and Command SB-3879 RS-232 V1.0 PROTOCOL DOCUMENTATION

Transcription

1 RS-232 Protocol and Command SB-3879 RS-232 V1.0 PROTOCOL DOCUMENTATION Part No.: ENCL00RS23200A0 Document Version: FEB 2016

2 RS-232 Protocol and Command Matrix / Routing Switcher Series RS-232 Protocol Table Thank you for purchasing the SHINYBOW Matrix/Routing Switcher. You will find this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use the Matrix / Routing switcher. RS-232 Cable Pin Lines 1. Transmission Rate: 9600bps 2. Data Format: 8 data bits, No parity, 1 start bit and 1 stop bit 3. Flowing Control: None / Also know as 9600,8,n,1 Data String Format: The Data String contains four elements. [Command][ ][Data][;] The format is: 1. Command 2. Space 3. Data 4. ; There is a single space after the Command and before the Data string. The data string must conclude with an ; (without the quotes). All text is full ASCII Code and is NOT case sensitive. 1

3 Commands: Note: not all commands are supported on all devices. Item Command Description 1 Key Set OSD Key 2 Power Set/Check the status of Power 3 Mute Set/Check the status of Mute 4 Source Set/Check the status of Source 5 Resolution Set/Check the status of Resolution 6 Brightness Set/Check the status of Brightness from OSD 7 Contrast Set/Check the status of Contrast from OSD 8 Hue Set/Check the status of Hue from OSD 9 Saturation Set/Check the status of Saturation from OSD 10 Sharpness Set/Check the status of Sharpness from OSD 11 Auto Set the status of Auto 11 Adjustment from OSD 12 H-Zoom Set/ Check the status of H-Zoom from OSD 13 V-Zoom Set/Check the status of V-Zoom from OSD 14 H-Pan Set/Check the status of H-Pan 15 V-Pan Set/Check the status of V-Pan 16 Overlap-L Set/Check the status of Overlap-L from OSD 17 Overlap-R Set/Check the status of Overlap-R from OSD 18 Overlap-T Set/Check the status of Overlap-T from OSD 19 Overlap-B Set/Check the status of Overlap-B from OSD 20 3D-Input Set/Check the status of 3D input from OSD 21 3D-Output Set/Check the status of 3D output from OSD 22 3D-1080p24Hz Set/Check the status of 3D 1080p24Hz from OSD 23 Language Set/Check the status of Language from OSD 24 Reset Set/Check the status of Reset from OSD 25 Button Set/Check the status of Button from OSD 26 Memory Set the status of 3D output from OSD 27 Recall Set the status of 3D output from OSD 28 TimeOut Set/Check the status of TimeOut from OSD 2

4 Key: Set Key Key +000; SB ; Set Menu Key Power: Key +001; SB ; Set Up Key Key +002; SB ; Set Down Key Key +003; SB ; Set Left Key Key +004; SB ; Set Right Key Key +005; SB ; Set Enter Key Power OFF Power +000; SB ; Power OFF Power ON Power +001; SB ; Power ON Check the Status of Condition Power?; Power +000; Power OFF Power +001; Power ON Mute: Mute OFF Mute +000; SB ; Mute OFF Mute ON Mute +001; SB ; Mute ON Check the Status of Mute Mute?; Mute +000; Mute OFF Mute +001; Mute ON Source: Set Source Source +000; SB ; Source set to VGA Source +001; SB ; Source set to DVI Source +002; SB ; Source set to HDMI Source +003; SB ; Source set to DP Source +004; SB ; Source set to YPbPr Source +005; SB ; Source set to VIDEO Source +006; SB ; Source set to S-VIDEO Check Source Source?; Source +000; Source set to VGA Source +001; Source +002; Source +003; Source +004; Source +005; Source +006; Source set to DVI Source set to HDMI Source set to DP Source set to YPbPr Source set to VIDEO Source set to S-VIDEO 3

5 Resolution: Set Resolution Resolution +000; SB ; Set resolution to 720x480 60Hz Resolution +001; SB ; Set resolution to 1280x720 60Hz Resolution +002; SB ; Set resolution to 1920x Hz Resolution +003; SB ; Set resolution to 800x600 60Hz Resolution +004; SB ; Set resolution to 1024x768 60Hz Resolution +005; SB ; Set resolution to 1280x800 60Hz Resolution +006; SB ; Set resolution to 1280x Hz Resolution +007; SB ; Set resolution to 1360x768 60Hz Resolution +008; SB ; Set resolution to 1400x Hz Resolution +009; SB ; Set resolution to 1600x Hz Resolution +010; SB ; Set resolution to 1920x Hz Check Resolution Resolution?; Resolution +000; Resolution is 720x480 60Hz Resolution +001; Resolution +002; Resolution +003; Resolution +004; Resolution +005; Resolution +006; Resolution +007; Resolution +008; Resolution +009; Resolution +010; Resolution is 1280x720 60Hz Resolution is 1920x Hz Resolution is 800x600 60Hz Resolution is 1024x768 60Hz Resolution is 1280x800 60Hz Resolution is 1280x Hz Resolution is 1360x768 60Hz Resolution is 1400x Hz Resolution is 1600x Hz Resolution is 1920x Hz Brightness: Set Brightness BRIGHTNESS XXXX; xxxx = Brightness number +000~+100 BRIGHTNESS +015; SB ; Set Brightness to 15 Check Brightness BRIGHTNESS?; BRIGHTNESS +001; Brightness setting is 1 BRIGHTNESS +015; Brightness setting is 15 4

6 Contrast: Set Contrast Contrast XXXX; xxxx = Contrast number +000~+100 Contrast +015; SB ; Set Contrast to 15 Check Contrast CONTRAST?; CONTRAST +001; Contrast setting is 1 CONTRAST +015; Contrast setting is 15 Hue: Set Hue Hue XXXX; xxxx = Hue number +000~+100 Hue +015; SB ; Set Hue to 15 Check Hue Hue?; Hue +001; Hue setting is 1 Hue +015; Hue setting is 15 Saturation: Set Saturation Saturation XXXX; xxxx = Saturation number +000~+100 Saturation +015; SB ; Set Saturation to 15 Check Saturation Saturation?; Saturation +001; Saturation setting is 1 Saturation +015; Saturation setting is 15 Sharpness: Set Sharpness Sharpness XXXX; xxxx = Sharpness number +000~+100 Sharpness +015; SB ; Set Sharpness to 15 Check Sharpness Sharpness?; Sharpness +001; Sharpness setting is 1 Sharpness +015; Sharpness setting is 15 Auto: Set Auto Auto +001; SB ; Set VGA Auto Adjustment 5

7 H-Zoom: Set H-Zoom H-Zoom XXXX; xxxx = H-Zoom number +000~+009 H-Zoom +001; SB ; Set H-Zoom to 1 Check H-Zoom H-Zoom?; H-Zoom +001; H-Zoom setting is 1 V-Zoom: Set V-Zoom V-Zoom XXXX; xxxx = V-Zoom number +000~+009 V-Zoom +001; SB ; Set V-Zoom to 1 Check V-Zoom V-Zoom?; V-Zoom +001; V-Zoom setting is 1 H-Pan: Set H-Pan H-Pan XXXX; xxxx = H-Pan number +000~+009 H-Pan +001; SB ; Set H-Pan to 1 Check H-Pan H-Pan?; H-Pan +001; H-Pan setting is 1 V-Pan: Set V-Pan V-Pan XXXX; xxxx = V-Pan number +000~+009 V-Pan +001; SB ; Set V-Pan to 1 Check V-Pan V-Pan?; V-Pan +001; V-Pan setting is 1 Overlap-L: Set Overlap Left Edge Overlap-L XXXX; xxxx = Overlap-L number -600~+600 Overlap-L +050; SB ; Set Overlap-L to +50 Check Overlap-L Overlap-L?; Overlap-L +050; Overlap-L setting is +50 6

8 Overlap-R: Set Overlap Right Edge Overlap-R XXXX; xxxx = Overlap-R number -600~+600 Overlap-R +050; SB ; Set Overlap-R to +50 Check Overlap-R Overlap-R?; Overlap-R +050; Overlap-R setting is +50 Overlap-T: Set Overlap Top Edge Overlap-T XXXX; xxxx = Overlap-T number -600~+600 Overlap-T +050; SB ; Set Overlap-T to +50 Check Overlap-T Overlap-T?; Overlap-T +050; Overlap-T setting is +50 Overlap-B: Set Overlap Bottom Edge Overlap-B XXXX; xxxx = Overlap-B number -600~+600 Overlap-B +050; SB ; Set Overlap-B to +50 Check Overlap-B Overlap-B?; Overlap-B +050; Overlap-B setting is +50 3D-Input: Set 3D Input 3D-INPUT +000; SB ; Set 3D Input to Auto 3D-INPUT +001; SB ; Set 3D Input to Side by Side 3D-INPUT +002; SB ; Set 3D Input to Top and Bottom Check 3D Input 3D-INPUT?; 3D-INPUT +000; 3D Input is Auto 3D-INPUT +001; 3D-INPUT +002; 3D Input is Side by Side 3D Input is Top and Bottom 3D-OUTput: Set 3D Output 3D-Output +000; SB ; Set 3D Output to Left Eye 3D-Output +001; SB ; Set 3D Output to Right Eye Check 3D Output 3D-Output?; 3D-Output +000; 3D Output is Left Eye 3D-Output +001; 3D Output is Right Eye 7

9 3D-1080P24Hz: Set 3D 1080p24Hz 3D-1080P24Hz +000; SB ; 3D 1080p24Hz Output Enable 3D-1080P24Hz +001; SB ; 3D 1080p24Hz Output Disable Check 3D 1080p24Hz 3D-1080P24Hz?; 3D-1080P24Hz +000; 3D 1080p24Hz Output Enable 3D-1080P24Hz +001; 3D 1080p24Hz Output Disable Language: Set Language Language +000; SB ; Set Language to English Language +001; SB ; Set Language to Simplified Chinese Language +002; SB ; Set Language to Traditional Chinese Check Language Language?; Language +000; Language is English Language +001; Language +002; Language is Simplified Chinese Language is Traditional Chinese Reset: Set Reset Reset +000; SB ; Reset All Settings Reset +001; SB ; Reset Video Wall Settings Button: Check Button Button +000; SB ; Set Button to Repeat Rate Off Button +001; SB ; Set Button to Repeat Rate Default Button +002; SB ; Set Button to Repeat Rate Slow Check Button Button?; Button +000; Button is Repeat Rate Off Button +001; Button +002; Button is Repeat Rate Default Button is Repeat Rate Slow 8

10 Memory: Set Memory Memory XXXX; xxxx = Memory Address XXXX Location MEMORY +000; SB ; Save at Memory Address 1 Recall: Recall from Memory Recall XXXX; xxxx = Memory Address (See above for all avaliable) RECALL +000; SB ; Recall a saved from Memory 1 TimeOut: Set TimeOut TIMEOUT XXXX; xxxx = TimeOut number +000~+060 TIMEOUT +015; SB ; Set TimeOut to 15 seconds Check TimeOut TimeOut?; TIMEOUT +001; TimeOut setting is 1 TIMEOUT +015; TimeOut setting is 15 seconds 9

11 THIS PAGE IS INTENTIONALLY LEFT BLANK.

12 122 Rose Ln. Suite 303 Frisco, Texas SHINY-USA