DINTEK LAN Cabling Systems

Transcription

1 CCTV over UTP Solution Benefits of structured UTP cabling include: Better interference rejection than coax UTP is less expensive than dedicated coax or fiber Color-coded cabling Unlimited bend radius Physically smaller than coax Easiest media to install and reconfigure UTP is extremely easy to terminate Installation: Simply find a spare pair of cable near the camera to attach the video transceiver as Transmitter and cross connect through the building(s) to where you plan to put your monitor, Quad, multiplexed, to attach the other video transceiver as Receiver. Structured Cabling Solution: 9 Patch Panel Cable Hub 4Pair UTP Cable RJ45 Wall Plate Power Supply 4Pair UTP Cable 9 Patch Panel IDF,Electrical Closet RJ45 Wall Plate 25Pair UTP Cable Up to 600M 9 Patch Panel 4Pair UTP Cable RJ45 Wall Plate 6 Port Active Receiver Hub 4Pair UTP Cable PTZ Controller RJ45 Wall Plate MDF,Control Center 7

2 Transceiver BNC/Terminal block Features: Transmit a full motion monochrome video signal up to 600 meters, color video signal up to 400 meters Passive, No power required Eliminate Coaxial Cable Specification: ITEM Transceiver VIDEO INPUT BNC,V p-p, 75 Ohms VIDEO OUTPUT 2P Terminal Block, RJ45 Jack TRANSMISSION DISTANCE 600M(B/W), 400M(COLOR) CABLE Twisted Pair CAT5 (AWG24) POWER X P/N P/N Description Description Std Pkg Qty transceiver BNC male to 2P terminal block transceiver BNC male to RJ45 Jack transceiver BNC male to RJ45 Jack with DC plug ,Power&Data transceiver BNC male+dc plug+control wire to RJ45 Jack Installation View: DC2V 250mA, up to 50 meters,p/t/z Contro DC2V 250mA, up to 50 meters PTZ Controller 72

3 & Audio Transceiver Installation View: Panel View: Front Rear Specification: ITEM VIDEO INPUT AUDIO INPUT RJ-45 OUTPUT TRANSMISSION DISTANCE CABLE FOR RJ-45 POWER DIMENSIONS (W x H x D) mm &Audio Transceiver BNC,V p-p, 75 Ohms 2*RCA,2V p-p 8P8C Jack 600M(B/W), 400M(COLOR) Twisted Pair (AWG24) X 0x77x24 RJ-45 Jack Pin Define: P/N P/N Description Description Std Pkg Qty & Audio Transceiver. BNC male+ 2xRCA jack to RJ45 jack. video and stereo audio transmission. Installation View: AV Application for Security System A/V Transceiver 4 Pair UTP Cable Conductor:24AWG Bare Solid Copper Transmission Distance: B/W M Color M A/V Transceiver A/V OUT No. AV Application for Education System 4 Pair UTP Cable Conductor:24AWG Bare Solid Copper Transmission Distance: B/W M Color M A/V IN No.9 4 Pair UTP Cable Conductor:24AWG Bare Solid Copper Transmission Distance: B/W M Color M AV IN to 9 Twisted Pair Distributor 73

4 4 Channel Transceiver Specification: ITEM 4 Channel Transceiver VIDEO INPUT 4*BNC,V p-p, 75 Ohms RJ-45 OUTPUT RJ-45 Jack/8PTerminal Block TRANSMISSION DISTANCE 600M(B/W), 400M(COLOR) CABLE FOR RJ-45 Twisted Pair CAT5 (AWG24) POWER X DIMENSIONS (WxHxD) mm 0x77x24 RJ-45 Jack Pin Define: P/N Description Channel video transceiver.4xbnc female to xrj45 jack + 8P terminal block. 4 passive transceiver C h a n n e l v i d e o, P o w e r & D a t a transceiver. 4xBNC female + DC Power to 4xRJ45 jack + 2P terminal block for data Cable Hub with 2P Power IN terminal 4xRJ45 jack to xrj45 jack Installation View: Power IN Up to 350 meters Up to 50 meters Power IN PTZ Controller Up to 50 meters 74

5 Active Twisted Pair Transmission Features: Transmit a full motion color or monochrome video signal and data signal (RS422, RS485), Color range 500 meters, B/W video signal up to 2400 meters. Three position range switch for gain select on Transmitter. Five position distance range switch on Receiver. System is integrated with alarm sensor (PIR, Magnetic, etc.) or data (Pan, Tilt, Zoom). Built in transient protection and ground lifting, damaging voltage spike problems are eliminated. Red LED: Power on / off. Green LED: receive/loss. Power supply included. Installation View: RJ-45 Jack Pin Define: Specification: ITEM NO. VIDEO INPUT DC INPUT DC OUTPUT FOR CCD CAMERA POWER CONSUMPTION DIMENSIONS W x H x D mm Transmitter BNC, Vp-p,75 Ohms DC 2V DC 2V Regulate A300mA(max) 40mA(max) 49x42x45 Panel View: Transmitter ITEM NO. Receiver VIDEO OUTPUT BNC,Vp-p,75 Ohms DC INPUT DC 2V POWER CONSUMPTION 40mA(max) Press 0~300M Press 2 300~600M VIDEO GAIN ADJUSTING Press 3 600~900M Press 4 900~200M Press 5 200~500M CABLE UTP Cable (24AWG) DIMENISONS (W x H x D) mm 49x42x45 Receiver P/N Description twisted pair transmission. BNC female to 4P terminal block. Including active transmitter & receiver. 75

6 9"Rack Mount Panels P/N Description Amp AC24V 6 Port Powe Supply Input:AC20V/230V Output:AC24V/0.5A Built in PTC fuse for short protection and auto rework on each port Port Hub Use for integrating Power, and Data onto 4xRJ45 Jack Built in surge protection on Data port Port Active Receiver Built in a highly balanced mode for extra interference immunity Port Passive & Data Transceiver. xrs485 Data input to 6xRS485 Output Port Passive Transceiver. 4x RJ45 Jack for 6 channel video input " 2U 9 Port Panel for Active Receiver 76

7 Surge protection Device Performs a different function than grounding requirements. Protects equipment from high voltage surges from nearby lightning strikes. Two stage protection: under ns-90v, over 0ns-2V. Wide range of applications: CCTV/CATV system, Antenna of Television, FM receivers, video camera, monitors, multiplexers & Quad processor, VCR...etc. P/N Description Coaxial Surge Protector BNC Connector Surge Protection Attack Time: ns Maximum Surge Current:4 KV Surge Life:300 surges of 00Amps, Power, Data Surge Protector Perfect for Speed Dome Protection Surge Protection Attack Time: ns Maximum Surge Current:4 KV Surge Life:300 surges of 00Amps Network Surge Protector Perfect for network, PC, Server...etc Surge Protection Attack Time: ns Maximum Surge Current:4 KV Surge Life:300 surges of 00Amps 77

8 Outdoor Use CAT 5e UTP 4 Pairs Twisted Pair Cable P/N Description Std Pkg Qty Outdoor cat.5e 4 pair UTP solid twisted pair cable. 24AWG. PE jacket. messenger material: 500M/reel galvanized steel wire. RG59/U Coaxial Cable P/N Description Std Pkg Qty RG59/U Coaxial cable: AWG 22 solid anneal cooper wire. 75 ohms. 200M/reel BNC Male to 4 BNC Male Cable 60cm. good for receiver side of 4 Channel Transceiver BNC Male Crimp 3 Piece Type for RG6U. Figure A BNC Male Crimp 3 Piece Type for RG59U. Figure A BNC Female to BNC Female Adapter. Figure B Figure A Figure B BNC Male to F Female Adapter Figure C F Male Crimp 2 Piece Type for RG6U. Figure D Figure C Figure D F Male Crimp 2 Piece Type for RG59U. Figure D F Female to F Female Adapter Figure E Figure E Figure F Coaxial Cable Stripper for RG-58/59/62/6. Figure F Coaxial Crimping Tool for RG-58/59/62/6. Figure G Figure G 78

9 CCTV over Fiber Solution /Data/Audio Fiber Converter Features: The CH /Data/Audio Fiber Converter transmission system is specifically designed for surveillance systems requiring seamless transmission over long distances. The most common applications are premise, factory, airport,freeway and tunnel. Digitally encode Auto Gain Control (AGC) One channel video and one duplex data and one duplex stereo audio Support of one bi-directional remote alarm channel Transmission over one fiber Multimode Fiber up to 5km Singlemoed up to 40km(00 km is available) LED indications for video, power, data, fiber Industrial grade design Standalone or Slide-in two versions (Slide-in version is used by 3.5U Converter Chassis) Standalone version Slide-in version + P/T/Z Control Fiber Optic Cable MM:5KM(max.) SM:40KM P/T/Z Controller Speaker 79

10 Specification: Product: Model Protocol Dimensions Power LED indicators CH /Data/Audio Fiber Converter PAL, NTSC mm (D W H) 2VDC or 90~240VAC Power, Optical signal,, Data, Alarm Connector and cables: Twisted Pair/STP RJ-45, Category 5 (EIA/TIA 568) Fiber connectors ST or FC Single mode fiber 9/25 μm(30nm or 550nm) Multimode fiber 50,62.5/25μm(850nm or 300nm) signal specifications: Connector BNC I/O impedance 75 Ω bandwidth 8MHz Bit Error Rate 0-9 input/output voltage V P-P typical,.5v P-P Max. resolution 8 bit Differential Gain <% Differential Phase <0.6 Tilt < 0.5% SNR >55dB Environment: Operating temperature -40 to +75 Storage temperature -40 to +85 Humidity 0 to 95 % (non-condensing) Regulatory approval RoHs, CE, FCC class A Transmission distance: Twisted Pair/STP Up to 00m Single mode cable Up to 20-00km Multimode cable Up to 2km Audio signal specification:(optional) Connector Terminal block I/O Level 0 dbm I/O Impedance 600 Ohms Bandwidth 20 Hz to 20 KHz Sample frequency 52.3KHz Audio resolution 24 bit SNR >80dB Data signal specifications:(optional) Connector terminal block Protocol RS-232,2-wire RS-485 or 4-wire RS-485/RS-422 Transmission speed 28Kbps Alarm signal specifications: Connector terminal block Input current-driven, 500 ma max. Output > 2.7 V on alarm, < 0.7 V in normal conditions P/N Description Std Pkg Qty video, SM, ST, Standalone video, duplex RS-485 Data, SM, ST, Standalone C C C C video, duplex stereo audio, SM, ST, Standalone video, duplex RS-485 Data, duplex stereo audio, SM, ST, Standalone video, MM, ST, Standalone video, duplex RS-485 Data, MM, ST, Standalone video, duplex stereo audio, MM, ST, Standalone video, duplex RS-485 Data, duplex stereo audio, MM, ST, Standalone video, SM, ST, Slide-in video, duplex RS-485 Data, SM, ST, Slide-in video, duplex stereo audio, SM, ST, Slide-in video, duplex RS-485 Data, duplex stereo audio, SM, ST, Slide-in MM Typical Distance is 5km, SM Typical Distance is 40 km, others need to be customized 80

11 CCTV over Fiber Solution 3.5U Converter Chassis Overview The 3.5U Converter Chassis is designed to accommodate 5 line cards of various types of line cards for easy operation and management. The compact 3.5U height saves the space of central offices. The redundant power system can be DC or AC to meet your different needs. The 3.5U Converter Chassis is also equipped with a powerful fan in the central back side, ensuring your system a cool and stable operating environment. Features Standard 9-inch chassis, 3.5U height 6 slots for installing line cards Supports two AC or DC redundant power supplies built-in cooling fan Diagnostic LED panel showing the status of the fan and power supplies Complies with FCC class A and CE mark Specifications Mechanical: Dimension: 445 mm (W) * 56 mm (H) *39 mm (D) Weight: 6.5 kg (not including power supplies and line cards) Environmental: Operating temperature: 0 ~70 Operating humidity: 0%~90% (non-condensing) Power supplies: AC: 00~250 VAC 50~60 Hz input DC: Input: 8~56 VDC input MM:5KM(max.) SM:40KM Fiber Optic Cable P/N Description Std Pkg Qty slots 3.5U Converter Chassis with two AC power supply slots 3.5U Converter Chassis with one AC power supply and one DC power supply slots 3.5U Converter Chassis with two DC power supply 8