Software User Manual. Software Version 1.5 EN

Transcription

1 Software User Manual Software Version.5 EN 7055

2 End User License Agreement (EULA) Do not use this product until the following license agreement is understood and accepted. By using this product, or allowing anyone else to do so, you are accepting this agreement. This End-User License Agreement (EULA) represents the contractual conditions between you, the Licensee, and UVI, located 59 rue Amelot, 750 Paris - France for the use of software, documentation and other materials created by UVI. You should not register, install or use UVI Products until the following license agreement is understood and accepted. By using UVI Products, or allowing anyone else to do so, you are accepting this agreement. A- License Grant. UVI grants to you, subject to the following terms and conditions, the non-exclusive right to use each authorized copy of the Product.. UVI Product license are granted only to a single user. You may use this product on up to three separate computers or ilok Dongles, which shall be owned and used by you exclusively. 3. Renting or lending the licensed Software to a third party is expressly forbidden. 4. Except if otherwise stated within this EULA, Licensee may resell the software to a third party or transfer the software permanently. Request may be done using the Transfer License feature in your ilok account, subject to a $5 fee per-license ($50 maximum) by Pace. The serial number of the Product will be transferred to the third party by UVI, and Licensee s original registration will be deleted. 5. Resale or ownership transfer of individual products obtained in a bundle, or those used to upgrade or cross-grade to other products are not allowed. 6. UVI allows you to use any of the sounds and samples in the products you ve purchased for commercial recordings without paying any additional license fees or providing source attribution to UVI. 7. This license expressly forbids resale or other distribution of the sounds and software included in the Product or their derivatives, either as they exist on disc, reformatted for use in another digital sampler, or mixed, combined, filtered, resynthesized or otherwise edited, for use as sounds, multi-sounds, samples, multi-samples, wavetables, programs or patches in a sampler, microchip or any hardware or software sample playback device. You cannot sell the Product content or give it away for use by others in their sampling or sample playback devices. 8. In the event UVI terminates this agreement due to your breach, you agree to return the original and all other copies of the software and documentation to UVI. 9. UVI reserves all rights not expressly granted to herein. B- License Activation. In order to use UVI Products it is required that you authorize them by registering your Serial Number on uvi.net/register, have a free ilok account (not necessarily a dongle) and install the free ilok License Manager (done automatically by UVI Workstation and Falcon installers). It is impossible to use UVI Products if they are not registered and authorized. C- Protection of Software You agree to take all reasonable steps to protect the Product and any accompanying documentation from unauthorized copying or use. You agree not to modify the Product to circumvent any method or means adopted or implemented by UVI to protect against or discourage the unlicensed use or copying of the Product. D- Ownership Ownership of, and title to, the enclosed digitally recorded sounds (including any copies) are held by UVI. Copies are provided to you only to enable you to exercise your rights under the license. E- Term This agreement is effective from the date you open this package, and will remain in full force until termination. This agreement will terminate if you break any of the terms or conditions of this agreement. Upon termination you agree to return to UVI all copies of this product and accompanying documentation and destroy any other copies made. F- Restrictions Except as expressly authorized in this agreement, you may not rent, lease, sub-license, distribute, copy, reproduce, display, modify or timeshare the enclosed Product or documentation. G- NFR Serials and Free Products UVI Products serial numbers labeled as NFR (Not For Resale) shall only be used for demonstration, testing and evaluation purposes. NFR Products may not be used for commercial purposes, and may not be resold or transferred. They are not eligible for license recovery and are exempt from update, upgrade or crossgrade offers, and cannot be purchased with or exchanged for vouchers. Furthermore, as an owner of an NFR Product, you are not entitled to promotions available for the commercial version of the Product. H- No Support Obligation UVI will make its best effort to support you in the event of technical difficulty with a UVI Product. However, UVI is not obligated to furnish or make available to you any additional information, software, technical information, know-how, or support. I- Specifications and System Requirements All technical specifications of UVI Products provided are intended to be estimates or approximations. Due to numerous variables no guarantees of compatibility or performance can be made. All such specifications shall be in writing. End-User is solely responsible for, prior to purchase, ensuring that End-User s devices are compatible and meet the system requirements for UVI Products, and that the applicable UVI Products meet End-User s requirements. This EULA is governed by the laws of France.. During authorization you will need to enter your name, address and postal address which will be stored in the UVI database. UVI uses a secure SSL connection with 8-bit-encryption that meets current security standards to transmit your data over the web. For further information about UVI s handling of personal data please see: 3. The UVI Product license allows up to 3 simultaneous activations on any combination of ilok dongles and computers. Activations can be moved between devices at anytime through the ilok License Manager. 07 UVI. All rights reserved. All trademarks are the property of their respective owners.

3 Table of Contents Introduction...4 System Requirements...5 User Interface Menu Bar...6 Globals and Mix Controls...7 Editor Globals...8 Time Editor...9 Gain Editor...0 Pan Editor... FX / FX Editor... Feedback...3 Links...4 Credits and Thanks...5 3

4 Introduction At Relayer s core is a variable multi-tap engine, providing up to 3 delay lines. Delay times are initially set with a typical free or host-synced time parameter and then modulated by swing and warp controls, allowing for quick and easy bouncing ball-style effects. By clicking through the central tabs, Relayer reveals a number of per-tap modulation editors for an unprecedented level of control and flexibility. Explore and experiment with each section as you need it, exercising precise control over time, gain, pan and variable multi-effect units. Freely draw sequences for each parameter or use the built-in presets and listen as your sound modulates over time, then tweak and transform to taste. Relayer functions exceptionally well in both studio and live settings. A playable Input Gate allows you to feed the delay with signal momentarily, perfect for adding dub-outs, builds or deconstructions to your performances or applying delay to specific lyrics with ease and precision. Master low and high-cut filters along with discrete wet and dry controls provide many creative mixing options, and even at high repeat values Relayer provides rock-solid and CPU efficient performance making it a reliable force in the most demanding environments. In addition to the two multi-effect units, Relayer includes a unique Color section that can process your sound through a wide range of custom, high-quality IRs. Choose from a variety of dedicated instrument amps, discrete effect amplifiers or lo-fi devices like hand-held radios, laptop speakers or telephones to immediately change the character of your sound. The effect can range from adding a subtle layer of dirt to a complete and dramatic alteration of the perceived sound source. Relayer Precision Creative Delay An advanced creative engine housed in an intuitive and easy to use interface, Relayer represents a new benchmark for digital delay effects. Relayer was designed from the ground-up to provide an efficient and inspiring workflow that enables users to dial in everything from basic delays to radical rhythmic multi-effects with speed, precision and natural musicality. Both an efficient utility and powerful creative mangler, Relayer is a versatile and inspiring musical effect. Its unique combination of features, incredible sound quality and easy to master interface help to make it an indispensable tool, both live and in the studio. Relayer is compatible with current versions of all major DAWs on both Mac and Windows platforms (VST, AU and AAX). A single license includes 3 activations that can be used on any combination of individual computer systems or ilok keys. Relayer was designed with a unique set of features that make it remarkably versatile, producing everything from simple delay effects to pure sonic decimation. Despite its diverse capabilities, Relayer is extremely easy to understand and use. A single UI screen elegantly presents global and modulated parameters and a dynamic patch visualizer, giving you clear, time-based graphical representation of your current settings. You ll find Relayer incredibly easy to master and it s dynamic feedback will help you achieve even the most complex sounds effortlessly. New in v.5 Diffusion parameter Ducker parameter Mix parameter in Redux FX Phasor in FX with Frequency, Order, Feedback, Spread and Depth parameters Additional presets including Studio Essentials by MixbusTV Additional IRs in the Color section 4

5 System Requirements Compatibility Audio Units, VST, or AAX Compatibility VST or AAX Tested and Certified in : Digital Performer 8+, Pro Tools +, Logic 9+, Cubase 7+, Nuendo 6+, Ableton Live 8+, Studio One +, Garage Band 6, Maschine &, Tracktion 4+, Vienna Ensemble 5, Reaper 4+, Sonar X3, Main Stage 3, MuLab 5.5+ Tested and Certified in : Digital Performer 8+, Pro Tools +, Cubase 7+, Nuendo 6+, Ableton Live 8+, Studio One +, Sonar X3+, Maschine &, Tracktion 4+, Vienna Ensemble 5, Reaper 4+, Sonar X3, Main Stage 3, MuLab 5.5+ Minimum System Requirements Mac OS X 0.7 or higher (64-bit / 3-bit compatible) Mac Intel Processor, 4 GB RAM Minimum System Requirements Windows 7 or higher (64-bit / 3-bit compatible) Intel Core Duo+, 4 GB RAM Flexible Authorization With ilok All UVI licenses allow up to 3 concurrent activations on any combination of computer hard drives or ilok USB keys, easily managed through the ilok License Manager (ILok account required). 5

6 Interface: Menu Bar Preset <> Menu Toggle Preset Name 3 4 A/B Snapshot Tool Tips 5 Menu Toggle Toggle the drop-down menu on/off» Load and Save Relayer presets» Factory Presets» User Presets Preset Name 3 Next / Previous Preset Quickly move through the presets» Buttons appear when you move the cursor over the menu bar 4 A/B Snapshot Use to store two different plugin states for A/B comparison» Initial Click: Stores current state to memory A» Following Clicks: Stores current state in bank A (resp B) and loads the previous state from bank B (resp A) 5 Tool Tips Display instructions for any parameter by hovering over it with your mouse 6

7 Interface: Globals and Mix Controls 7 I/O Meters Time 8 Wet Signal Feedback 4 9 Solo Repeats 0 Dry Signal Sync 3 Modulation 5 Color Diffusion 6 Master Filter 3 Visualizer Time Set the time between consecutive taps in MS [beat ratio when SYNC is active] Repeats Set the number of active taps 3 Sync Syncs TIME parameter to host tempo 4 Feedback Set amount of processed signal fed back into the delay 5 Modulation» On/Off» Depth (in cents) Set the modulation amount in cents» Rate [multiplier) Controls the rate of modulation 6 Diffusion» On/Off» Start Set the input diffusion time in ms» Amount Set the diffusion amount 7 I/O Meters 8 Wet Signal Amount of effected signal passed to Relayer s output 9 Solo [Wet Signal] Mutes dry signal output 0 Dry Signal Amount of uneffected input signal passed directly to Relayer s output Color Processes output signal with a user selectable IR» On/Off» Impulse Response Menu Select the IR model» Mix Amount Amount of dry/wet signal output Master Filter» On/Off» High-Pass Filter Frequency Adjust filter frequency ( db/octave)» Low-Pass Filter Frequency Adjust filter frequency ( db/octave) 3 Visualizer Dynamic real-time visualization shows time between taps (including swing, warp and time modulation effects) and per-tap modulation values of Gain, Pan, FX and FX 7

8 Interface: Editor Globals Power / Tabs 5 Mod Range Target Param 6 Flatten Loop Preset Menu 3 Transforms 4 7 Mod Editor 8 Param Range Power / Tabs» Power Buttons Click to turn the respective modulation sequencers on/off» Tabs Click to change the current editor between Time, Gain, Pan, FX, FX and Feedback Target Param Display name of the modulation s target parameter (current step and value displayed below when editing] 3 Preset Menu Erases current modulation sequence and applies a user selectable preset shape (sequence is mapped within the current Mod Range) 4 Transforms» Vertical Offset Click-drag to move step values up/down» Horizontal Offset Click-drag to move steps left/right» Horizontal Flip Click to flip modulation sequence» Scale Click-drag to scale modulation sequence + Ctrl = fine control» Skew Click-drag to skew modulation sequence from left-to-right + Ctrl = fine control + Shift = skew from right-to-left Note: hit ESCAPE during click-drag edits to reset transform 5 Mod Range Modify first and last step index to create shorter looping sequences 6 Flatten Loop If a custom Mod Range is set, makes looped steps editable 7 Mod Editor Click-drag to draw custom modulation sequences 8 Param Range [y-axis labels] 8

9 Interface: Time Editor Snap Swing Swing Scale Warp 3 4 TIME Use the Warp and Swing controls to create global shifts in tap time distribution for weighted rhythms or bouncing ball effects, or adjust inter-tap time multipliers with the modulation sequencer for completely customizable delay patterns. Changes to time can be seen in real-time via the Visualizer. Snap Modulation sequencer snap modes:» Straight» Triplet» Dotted» All» Free [none] Swing Inter-tap swing amount (+/-00%) 3 Swing Scale Adjust the swing time base (x.5, x.5, x, x) 4 Warp Warp delay times from linear distribution to logarithmic in or logarithmic out 9

10 Interface: Gain Editor Range GAIN Use the Gain modulation sequencer to change the level of each delayed signal. Gain range can be customized to suit the need for subtle or extreme gain changes. Range Set the modulation sequencers range at either -4 db or -60 db 0

11 Interface: Pan Editor Spread Width PAN Use the Gain modulation sequencer to change the level of each delayed signal. Gain range can be customized to suit the need for subtle or extreme gain changes. Spread and Width controls can be edited to independently change the distance between left and right points and the overall width of the stereo field. Spread Globally increase or decrease the distance between far left and right modulation points by 0-00% Width Add a delay to the weaker of the two channels (up to 0ms) to create the perception of a wider stereo field Spread makes an excellent automation target for gradually adding stereo effects to your delay.

12 Interface: FX / FX Editor Offset LFO Effects 3 FX / FX FX and FX each allow modulation of a user-selectable effect. Choose between a biquad filter, comb filter, vowel filter, wahwah effect, a bit and sample frequency reducer and a waveshaper. Offset Shift graph values up/down [+/-00%] LFO Apply a sine wave LFO to the graph values WahWah TRGT: WAH AMOUNT [0-00%)» Model: Default, Cry, Cry B, Cry C, Vox, Vox M, Bass» Drive [0-00%)» Master [-inf to 0dB) Each effect has a unique modulation target for its step sequencer. For the Biquad and Comb filters it s cutoff frequency, the Vowel filter allows modulation between user-selectable vowel shapes, WahWah effects strength, Redux targets the sample frequency (down to 00Hz) WaveShaper targets the drive amount, and Phasor targets the frequency of the multistage all-pass filter. 3 Effects: Biquad Filter TRGT: CUTOFF FREQ [0Hz - 0kHz]» Mode [HP, LP, BP, Notch]» Q [0-00%) Comb Filter TRGT: CUTOFF FREQ [0Hz - 0kHz]» Mode [+/-)» Q [0-00%) Vowel Filter TRGT: MORPH [Vowel A - B]» Mode [LP, BP, HP)» Formant [+/-)» Vowel A [A, E, I, O, U)» Vowel B [A, E, I, O, U) Redux TRGT: SAMPLE FREQ (00Hz - DAW s SR]» Bits [-3)» Jitter [0-00%)» Mix [0-00%) WaveShaper TRGT: DRIVE AMOUNT (0-00% ]» Mode [Tanh, Fold, Sine)» Mix [0-00%)» In [+/-40dB)» Out [+/-40dB) Phasor TRGT: FREQ [0Hz - 0kHz]» Order [0-)» Feedback [±99%)» Spread [±st)» Depth [0-00%)

13 Interface: Feedback / Dynamics Tab 3 Input Gate Ducker Feedback FEEDBACK The Feedback section allows you to process the Feedback signal before it s reinjected to the delay via the Feedback Knob on the main panel. Additionally you can select precisely which tap you want the Feedback signal to reinject at (as either an explicit tap number or Last).» Feedback Tap Tap used for the feedback loop. Explicit tap number or LAST» Drive type Set the drive type for the feedback loop (Analog, Tape and Tube)» High Pass Set the cut off frequecy of the low cut filter (0Hz - 0kHz)» Low Pass Set the cut off frequecy of the high cut filter (0Hz - 0kHz)» Drive Set the drive amount (0-00%) INPUT GATE Input gate mutes input signal to produce a spot effect. It is ideal for specific drum hits or vocal phrases and so on.» Arm Enable or disable the input gate» Engage Press to let input signal enter the delay 3 Ducker Ducker will compress the wet and dry signals for more intelligible delayed tracks or to create classic sidechain pumping effects» On/Off» Reduction Level Meter» Threshold Set the trigger level of the ducker activation (-00-0dB)» Amount Set the reduction amount of the ducking effect (0-50dB)» Attack Set the attack time of the gate ( - 00ms)» Hold Set the hold time of the gate ( - 000ms)» Decay Set the decay time of the gate (0-000ms) 3

14 Links UVI Home Effect Installation Guide FAQ Tutorial and Demo Videos Support uvi.net/ installing_uvi_effects_en.pdf uvi.net/faq youtube.com/ uvi.net/contact-support ilok Home ilok License Manager FAQ ilok.com/ ilok.com/ilm.html ilok.com/supportfaq 4

15 Credits and Thanks Produced by UVI DSP Louis Couka Remy Muller Software Olivier Tristan Remy Muller Louis Couka GUI, Design Nathaniel Reeves Preset Design Alain Etchart Damien Vallet Simon Stockhausen David G (MixBus TV) Documents Nathaniel Reeves Kai Tomita Garrett DeMartinis