STRUCTURED CABLING SOLUTIONS

Transcription

1 STRUCTURED CABLING SOLUTIONS

2 25 YEAR WARRANTY COMPANY PROFILE NetBox a reputed developer & manufacturer of Professional Quality Data Cabling Connectivity Products & Solutions, was founded in 2003 with the aim of providing professional quality data connectivity products & accessories to the ever growing Information technology dependent markets. NetBox offers complete End-to-End Datacenter & Structured Cabling Connectivity Solutions including Copper-Fiber- Cabinets & almost all passive accessories. NetBox Solution s focuses on delivering industry standards based technologies that support the transition to higherbandwidth networking. NetBox offers solutions that address performance, manageability, speed & reliability. NetBox warrants that the product installed is free from physical defects and installation of these products is in keeping and has met all the requirements set out by NetBox for correct methods and practices pertaining to the structured cabling system. For the same period, these products are warranted to meet or exceed the specifications of standards organization including ISO/IEC CENELEC and TIA/EIA for the category of NetBox structured cabling system installed. The warranty will be void, if the products have been misused, damaged, abused, removed from the original site, or have been relocated within the original site by a technician that has not been certified by NetBox as being qualified to install NetBox structured cabling system. The products covered by the warranty include unshielded twisted pair cables, optical fiber cables, patch cables, information outlets and patch panels etc. In no event will NetBox be liable for consequential or incidental damages, including but not limited to damages for lost data, lost power, time profits, revenues or the like arising from the loss of use or interruption of a system due to faulty product. The warranty describe above relates only to NetBox products as separate components and is not a warranty that the products when combined with other third party products or components in a data or communication system, shall meet any level of system performance. In just a short span of time, NetBox has built a reputation for reliability & professionalism in the products & solutions that we deliver. Our success is primarily due to our philosophy where we truly believe, that our business partners & clients, are an extension of our own business. NetBox clients include major organizations from the Defense, Telecom, Banking, Corporate, Real Estate, Airlines, Construction & other major industry segments. sales@netboxwll.com -

3 CONTENTS STRUCTURED CABLING PRODUCTS 1-26 TELECOM CABLING PRODUCTS FIBER OPTIC PRODUCTS CABINETS & RACKS POWER DISTRIBUTION ACTIVE PRODUCTS TOOLKITS

4 COMING SOON NetBox FTTH SOLUTION Planar Light Wave Circuit Splitters (PLC) Fiber Optic Distribution Boxes Fiber Optic Terminal Boxes Optical Splitter Management Trays Fiber Optic Splice Cabinets Fiber Optic Cables Outdoor Closures -

5 End to End Telecom, Enterprise & Data Center Cabling Solutions STRUCTURED CABLING PRODUCTS CAT.6A 10G UTP CABLING SYSTEM 2-3 CAT.6A 10G STP CABLING SYSTEM 4-5 CAT.6 UTP CABLING SYSTEM 6-11 CAT.6 FTP CABLING SYSTEM CAT.5E UTP CABLING SYSTEM CAT.5E FTP CABLING SYSTEM STRUCTURED CABLING ACCESSORIES

6 STRUCTURED CABLING PRODUCTS CAT.6A 10G UTP CABLING SYSTEM Cat.6A 10G UTP Solid Cable 6-around-1 cable test configuration: This test is for measuring alien crosstalk loss between pairs of adjacent cables in a 7-cable assembly consisting of the same design. Measure the ANEXT loss and AFEXT loss between each of the pairs of the disturbed cable and each pair of every disturbing cable. This will result in 96 measurements each for ANEXT loss and AFEXT loss. Netbox 10GS Cables are under the 6-around-1 cable Product Feature: Electrical Characteristics: Great performance with headroom of upto 6dB Impedence 100 +/- 15 ohms (10-550MHz) All materials comply with ROHS standard DC resistance, unbalance of a pair: 3% Max Netbox 10GS LAN supports IEEE 802.3an 10G Base-T Capacitance unbalance (pair to ground): 330pF/100M Max standard & TIA/EIA 568-B.2-10 DRAFT.7 Propagation delay skew: 25nS/100M Test range from 1 to 750 MHz Cable Data: 305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor 4 Pairs cabled togather with a spline core separator Jacket: Low-smoke, flame-retardant PVC Outer diameter: 8.0mm Weight: 19 kg/305m Temperature Range: -20 C to +75 C Electronic Characteristics: Color CMR LSZH Gray NB-C6A-CAU-01-CMR NB-C6A-CAU-01-LSOH Blue NB-C6A-CAU-02-CMR NB-C6A-CAU-02- LSOH Purple NB-C6A-CAU-03-CMR NB-C6A-CAU-03- LSOH White NB-C6A-CAU-04-CMR NB-C6A-CAU-04- LSOH FREQ (MHz) INS LOSS (db/100m) RETURN LOSS (db/100m) NEXT (db/100m) PS NEXT (db/100m) ACR (db/100m) PS ACR (db/100m) PROP DELAY (db/100m) PS ANEXT (db/100m) ALIEN CROSSTALK PS AACRF (db/100m) Max Min Min Min Min Min Max Min Min

7 STRUCTURED CABLING PRODUCTS Cat.6A 10G UTP Top-Entry Keystone Jack 1 Color Option: WH BK BL RE YE GN IV Part # (XX = color): 1. NB-C6A-KU1-XX 2. NB-C6A-KU2-XX Cat.6A 10G UTP Right-Angled Keystone Jack 2 Description: Cat.6A channel compliant UTP top-entry (180º) keystone jack, 110 IDC Cat.6A channel compliant UTP top-entry (180º), shuttered keystone jack, 110 IDC Color Option: WH BK BL RE YE GN IV Part # (XX = color): 1. NB-C6A-KU3-XX Description: Cat.6A channel compliant UTP right-angled (90º) keystone jack, 110 IDC CAT.6A 10G UTP CABLING SYSTEM NB-C6A-KU4-XX Cat.6A channel compliant UTP right-angled (180º), shuttered keystone jack, 110 IDC Cat.6A 10G UTP In-Line Coupler 1 Color Option: WH BK BL RE YE GN IV Part # (XX = color): Description: 1. NB-C6A-LU1-XX Cat.6A channel compliant UTP in-line coupler, outlet mountable 2 2. NB-C6A-LU2-XX Cat.6A channel compliant UTP in-line coupler, mobile style Cat.6A 10G UTP Patch Cords Color Option: BK BL RE OR GN GR Part # (XX = color, YY=length (Mtr)): 1. NB-C6A-CU-YY-XX Description: Cat.6A, 23AWG, unscreened T568B wiring patch cord, snagless assembled boot, PVC 2. NB-C6A-CU-YY-XX-LSOH Cat.6A, 23AWG, unscreened T568B wiring patch cord, snagless assembled boot, LSOH Cat.6A 10G UTP 24 Port Patch Panel 1 Part # : Description: 1. NB-C6A-PPU-1 Cat.6A channel compliant UTP snap-in patch panel w/rear cable management, 110 IDC, 24-port, black color 2 2. NB-C6A-PPU-2 Cat.6A channel compliant UTP shuttered snap-in patch panel w/rear cable management, 110 IDC, 24- port, black color 3

8 STRUCTURED CABLING PRODUCTS CAT.6A 10G STP CABLING SYSTEM Cat.6A 10G S/FTP Solid Cable 6-around-1 cable test configuration: This test is for measuring alien crosstalk loss between pairs of adjacent cables in a 7-cable assembly consisting of the same design. Measure the ANEXT loss and AFEXT loss between each of the pairs of the disturbed cable and each pair of every disturbing cable. This will result in 96 measurements each for ANEXT loss and AFEXT loss. Netbox 10GS Cables are under the 6-around-1 cable Product Feature: Electrical Characteristics: Great performance with headroom of upto 6dB Impedence 100 +/- 15 ohms (10-550MHz) All materials comply with ROHS standard DC resistance, unbalance of a pair: 3% Max Netbox 10GS LAN supports IEEE 802.3an 10G Base-T Capacitance unbalance (pair to ground): 330pF/100M Max standard & TIA/EIA 568-B.2-10 DRAFT.7 Propagation delay skew: 25nS/100M Test range from 1 to 750 MHz Cable Data: 305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor 4 Pairs cabled togather with a spline core separator Jacket: Low-smoke, flame-retardant PVC Outer diameter: 8.0mm Weight: 19 kg/305m Temperature Range: -20 C to +75 C Electronic Characteristics: Color CMR LSZH Gray NB-C6A-CAS-01-CMR NB-C6A-CAS-01-LSOH Blue NB-C6A-CAS-02-CMR NB-C6A-CAS-02- LSOH Purple NB-C6A-CAS-03-CMR NB-C6A-CAS-03- LSOH White NB-C6A-CAS-04-CMR NB-C6A-CAS-04- LSOH FREQ (MHz) INS LOSS (db/100m) RETURN LOSS (db/100m) NEXT (db/100m) PS NEXT (db/100m) ACR (db/100m) PS ACR (db/100m) PROP DELAY (db/100m) PS ANEXT (db/100m) ALIEN CROSSTALK PS AACRF (db/100m) Max Min Min Min Min Min Max Min Min

9 STRUCTURED CABLING PRODUCTS Cat.6A 10G Die-Cast STP right-angled Keystone Jack Part #: 1. NB-C6A-KS1 Description: Cat.6A 10G Die-Cast STP Top-Entry Tool-less Keystone Jack Part #: 1. NB-C6A-KS2 Cat.6A channel compliant Die-Cast STP keystone jack, rightangled, 110 IDC Description: Cat.6A channel compliant Die-Cast STP keystone jack, topentry, tool-less, 110 IDC CAT.6A 10G STP CABLING SYSTEM Cat.6A 10G STP In-Line Coupler Part #: Description: 1. NB-C6A-LS1 Cat.6A channel compliant STP in-line coupler, outlet mountable Cat.6A 10G SSTP Patch Cords Color Option: BK BL RE OR GN GR Part # (XX = color, YY=length (Mtr)): 1. NB-C6A-CS-YY-XX Description: Cat.6A, 23AWG, screened T568B wiring patch cord, snagless molded boot, PVC 2. NB-C6A-CS-YY-XX-LSOH Cat.6A, 23AWG, screened T568B wiring patch cord, snagless molded boot, LSOH Cat.6A 10G STP 24 Port Patch Panel Part # : Description: 1. NB-C6A-PPS-1 Cat.6A channel compliant Die-Cast STP snap-in patch panel w/rear cable management, 110 IDC, 24- port, black color 5

10 STRUCTURED CABLING PRODUCTS CAT.6 UTP CABLING SYSTEM Cat. 6 UTP 250 MHz Solid Cable Application: Industry Standard: 1000BASE-T Gigabit Ethernet (IEEE 802.3) Verified to TIA/EIA 568B Base-T Fast Ethernet (IEEE802.5) UL Listed 10Base-T (IEEE802.3) ISO/IEC 11801(2 nd edition) 155/622 Mbps 1.2/2.4 Gbps ATM IEC Token Ring (IEEE802.5) 100 Mbps TP-PMD Cable Data: 305m(1,000ft) pull Box 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.22 Insulation Dia (±0.03mm): 1.02 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 6.0mm Average jacket thickness : 0.5mm Weight: 13 kg/305m Minimum bend radius: O.D.*6 8 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +75 C Electronic Characteristics: Electrical Performance (at 250 MHz): MHz Impedance: 100± 15 ohms MHz Impedance: 100± 22 ohms Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 73.2 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color PVC LSZH CMR Gray NB-COP-001 NB-COP-001-LSOH NB-COP-001-CMR Blue NB-COP-002 NB-COP-002-LSOH NB-COP-002-CMR Red NB-COP-004 NB-COP-004-LSOH NB-COP-004-CMR Yellow NB-COP-152 NB-COP-152-LSOH NB-COP-152-CMR Green NB-COP-003 NB-COP-003-LSOH NB-COP-003-CMR Orange NB-COP-153 NB-COP-153-LSOH NB-COP-153-CMR Black NB-COP-154 NB-COP-154-LSOH NB-COP-154-CMR

11 STRUCTURED CABLING PRODUCTS Cat. 6 UTP 250 MHz Solid Cable (Outdoor Grade) CAT.6 UTP CABLING SYSTEM Application: 1000BASE-T Gigabit Ethernet (IEEE 802.3) 100Base-T Fast Ethernet (IEEE802.5) 10Base-T (IEEE802.3) 155/622 Mbps 1.2/2.4 Gbps ATM Token Ring (IEEE802.5) 100 Mbps TP-PMD Cable Data: 305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.22 Insulation Dia (±0.03mm): 1.02 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 6.5mm Average jacket thickness : 0.7mm Weight: 14 kg/305m Minimum bend radius: O.D.*6 8 Maximum pulling tension: 10Kg Choice of colors Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +85 C Electronic Characteristics: Industry Standard: Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC 11801(2 nd edition) IEC Electrical Performance (at 250 MHz): MHz Impedance: 100± 15 ohms MHz Impedance: 100± 22 ohms Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 73.2 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color Black PE NB-COP-202 7

12 STRUCTURED CABLING PRODUCTS CAT.6 UTP CABLING SYSTEM Cat MHz, 4 Pair UTP Patch Cords Application: Industry Standard: 1000BASE-T Gigabit Ethernet (IEEE 802.3) Verified to TIA/EIA 568B Base-T Fast Ethernet (IEEE802.5) UL Listed 10Base-T (IEEE802.3) ISO/IEC 11801(2 nd edition) 155/622 Mbps 1.2/2.4 Gbps ATM IEC Token Ring (IEEE802.5) 100 Mbps TP-PMD Cable Data: Electronic Characteristics: Category 6, 24 AWG Stranded Copper Conductor 50u Gold Plated on the plug Contacts Temperature Range: -20 C to +75 C FR PVC jacket, LSZH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Length White Blue Green Red Gray Yellow Orange Black 0.5M NB-COP-203 NB-COP-204 NB-COP-205 NB-COP-206 NB-COP-191 NB-COP-207 NB-COP-208 NB-COP-209 1M NB-COP-010 NB-COP-014 NB-COP-018 NB-COP-022 NB-COP-076 NB-COP-156 NB-COP-164 NB-COP-160 2M NB-COP-011 NB-COP-015 NB-COP-019 NB-COP-023 NB-COP-079 NB-COP-157 NB-COP-165 NB-COP-161 3M NB-COP-012 NB-COP-016 NB-COP-020 NB-COP-024 NB-COP-077 NB-COP-158 NB-COP-166 NB-COP-162 5M NB-COP-013 NB-COP-017 NB-COP-021 NB-COP-025 NB-COP-078 NB-COP-159 NB-COP-167 NB-COP M NB-COP-184 NB-COP-146 NB-COP-185 NB-COP-186 NB-COP-187 NB-COP-188 NB-COP-190 NB-COP-189 8

13 STRUCTURED CABLING PRODUCTS Cat.6 24port & 48port UTP Patch Panels 48 Port Patch Panel 24 Port Patch Panel CAT.6 UTP CABLING SYSTEM Rear Cable Management Bar Product Description: Electrical: 24-port 1U / 48-port 2U patch panels, Cat6 UTP type. ETL tested & verified CAT6 channel performance Combined cable management bar. According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat6 Standard. Universal wiring, panels are supplied with labeling for both T568A and T568B. Connecting: FCC port for Cat6 UTP patch cord and IDC for horizontal distribution in the cables. 110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins. Use in 250MHz applications. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to ANSI/TIA/EIA-568 B.2-1 Mates with modular plug conforming to FCC Part 68 Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-040 NB-COP-041 Description 24 port Unshielded Cat. 6 patch panel, 1U, 110 & Krone dual Type, with Rear cable management bar 48 port Unshielded Cat. 6 patch panel, 2U, 110 & Krone dual Type, with Rear cable management bar 9

14 STRUCTURED CABLING PRODUCTS CAT.6 UTP CABLING SYSTEM Cat.6 UTP Mini Patch Panel Product Description: 12 ports patch panel, Cat6 UTP type. ETL tested & verified CAT6 channel performance According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat6 Standard. Universal wiring, panels are supplied with labeling for both T568A and T568B. 110 and Krone dual type IDC termination. Entire high-carbon steel outer frame, with plastic powder cladding. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins. Use in 250MHz applications. Environmental: Electrical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Mechanical: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to ANSI/TIA/EIA-568 B.2-1 Mates with modular plug conforming to FCC Part 68 Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-090 Description 12 port Unshielded Cat.6 Wall mounted patch panel Cat.6 UTP RJ45 Plug Cat.6 UTP Blank Panel Product Description: Product Description: Housing: Polycarbonate Contact: Copper alloy 50u gold plated over nickel AWG stranded & solid wire Durability: 750 cycles Min. Exceed category 6 specifications Use with the universal RJ crimp tool Entire steel 24 ports UTP blank patch panel. Material: Carbon steel, 1.5mm, powder coated, Black color UTP Cat6 or Cat5e keystone jacks can be assembled on this panel. The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel. Fitting for horizontal distribution in the equipments room and equipments connecting. P/N: NB-COP-059 P/N NB-COP-200 NB-COP-047 Description NB-COP-047 Blank Snap-in patch panel with Back bar, 24 port Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, White 10

15 STRUCTURED CABLING PRODUCTS Keystone Jack (Cat6 UTP) NB-COP-056 NB-COP-047 CAT.6 UTP CABLING SYSTEM Product Description: Electrical: Keystone jack, Cat6 UTP type, 90⁰ and 180⁰ punching direction, fit for connecting application of communication ports in working area. A compact & ingenious designing, with the punching sequence direction marks on the sides of keystone jack, which can provide a correct and quick guide for punching and connecting operation. And the fastener hats will make sure that the cable can be fixed reliably in the IDC clips. T568A punching sequence and T568B punching sequence are both compatible. Connection type: FCC connector for RJ45 patch cord and IDC for 4 pair Cat6 cables. Fitting for Cat6 general cable distribution systems. Compatible for Cat5 and Cat5e systems. Inserting duration: 750 times. Punching duration: 250 times. Standard 110 punching tool. Testing condition of transmitting capability: 250MHz. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min CAT6 Permanent Link: Conform to ANSI/TIA/EIA-568 B.2-1 Environmental: Storage: -40 C to +85 C Operation: 0 C to 70 C Mates with modular plug conforming to FCC Part 68, Subpart F. Mechanical: Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with Nickel Plating Wire: AWG Part No. NB-COP-047 NB-COP-048 NB-COP-049 NB-COP-050 NB-COP-051 NB-COP-052 NB-COP-053 NB-COP-054 NB-COP-169 NB-COP-056 Description Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, White Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, Black Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, White Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Blue Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Green Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Red Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Yellow Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Black Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Orange Cat.6 Tool less, 110/ krone Right-angle (90º) Keystone Jack, T568A/B, White 11

16 STRUCTURED CABLING PRODUCTS CAT.6 FTP CABLING SYSTEM Cat. 6 FTP 250 MHz Solid Cable Application: 1000BASE-T Gigabit Ethernet (IEEE 802.3) 100Base-T Fast Ethernet (IEEE802.5) 10Base-T (IEEE802.3) 155/622 Mbps 1.2/2.4 Gbps ATM Token Ring (IEEE802.5) 100 Mbps TP-PMD Industry Standard: Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC 11801(2 nd edition) IEC Cable Data: Electrical Performance (at 250 MHz): 305m(1,000ft) pull Box MHz Impedance: 100± 15 ohms 100% Aluminum foil tape screen MHz Impedance: 100± 22 ohms 23 AWG Solid Bare Copper Conductor (0.57mm) Impedance Delay scew 45 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.28 Pair to ground capacitance unbalance (PF/100m) 330Max Insulation Dia (±0.03mm): 1.02 Conductor DC resistance 20% (ohms/km) 73.2 Overall PVC jacket, LSOH & CMR on request (RoHS) Resistance unbalance (5%) Outer diameter (±1.0mm): 6.6mm Test object: jacket Average jacket thickness : 0.5mm Test material: PVC Weight: 17kg/305m Before tensile strength (Mpa) 13.8 Minimum bend radius: O.D.*6 8 Aging Elongation (%): 100 Maximum pulling tension: 10Kg Aging condition (ºCxhrs): 100x240 Choice of colors After tensile strength (Mpa): 85% of unaged Flame Rating: CM, CMR, LSZH Aging elongation (%): 50% of unaged Twisting lay length (mm): 30 underneath Cold bend (-20±2 ºCx 4hrs): no crock Rip cord Temperature Range: -20 C to +75 C Electronic Characteristics: Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL-FEXT Db/100m RL db Color PVC LSZH CMR Dark Gray NB-COP-155 NB-COP-155-LSOH NB-COP-155-CMR Blue NB-COP-173 NB-COP-173-LSOH NB-COP-173-CMR Red NB-COP-006 NB-COP-006-LSOH NB-COP-006-CMR Yellow NB-COP-174 NB-COP-174-LSOH NB-COP-174-CMR Green NB-COP-005 NB-COP-005-LSOH NB-COP-005-CMR Orange NB-COP-175 NB-COP-175-LSOH NB-COP-175-CMR Black NB-COP-176 NB-COP-176-LSOH NB-COP-176-CMR 12

17 STRUCTURED CABLING PRODUCTS Cat. 6 FTP 250 MHz Solid Cable (Outdoor Grade) CAT.6 FTP CABLING SYSTEM Application: 1000BASE-T Gigabit Ethernet (IEEE 802.3) 100Base-T Fast Ethernet (IEEE802.5) 10Base-T (IEEE802.3) 155/622 Mbps 1.2/2.4 Gbps ATM Token Ring (IEEE802.5) 100 Mbps TP-PMD Cable Data: 305m(1,000ft) Reel 100% Aluminum foil tape screen 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.28 Insulation Dia (±0.03mm): 1.02 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 6.6mm Average jacket thickness : 0.5mm Weight: 18kg/305m Minimum bend radius: O.D.*6 8 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +85 C Electronic Characteristics: Industry Standard: Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC 11801(2 nd edition) IEC Electrical Performance (at 250 MHz): MHz Impedance: 100± 15 ohms MHz Impedance: 100± 22 ohms Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 73.2 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color Black P/N NB-COP

18 STRUCTURED CABLING PRODUCTS CAT.6 FTP CABLING SYSTEM Cat.6 4 Pair FTP Patch Cords Application: Industry Standard: 1000BASE-T Gigabit Ethernet (IEEE 802.3) Verified to TIA/EIA 568B Base-T Fast Ethernet (IEEE802.5) UL Listed 10Base-T (IEEE802.3) ISO/IEC 11801(2 nd edition) 155/622 Mbps 1.2/2.4 Gbps ATM IEC Token Ring (IEEE802.5) 100 Mbps TP-PMD Cable Data: Electronic Characteristics: Category 6, 24 AWG Stranded Copper Conductor Foil shielding protects against (EMI) & (RFI) 50u Gold Plated on the plug Contacts Temperature Range: -20 C to +75 C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Length White Blue Green Red Dark Gray 0.5M NB-COP-211 NB-COP-212 NB-COP-213 NB-COP-214 NB-COP-215 1M NB-COP-126 NB-COP-130 NB-COP-134 NB-COP-138 NB-COP-142 2M NB-COP-127 NB-COP-131 NB-COP-135 NB-COP-139 NB-COP-143 3M NB-COP-128 NB-COP-132 NB-COP-136 NB-COP-140 NB-COP-144 5M NB-COP-129 NB-COP-133 NB-COP-137 NB-COP-141 NB-COP M NB-COP-216 NB-COP-217 NB-COP-218 NB-COP-219 NB-COP

19 STRUCTURED CABLING PRODUCTS Cat.6 24port FTP Patch Panel CAT.6 FTP CABLING SYSTEM Product Description: Electrical: 24-port 1U patch panel, Cat6 FTP type. ETL tested & verified CAT6 channel performance Cable management and grounding devices are combined in this patch panel. According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat6 Standard. Universal wiring, panels are supplied with labeling for both T568A and T568B. Connecting: FCC port for Cat6 FTP patch cord and IDC for horizontal distribution in the cables. 110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins; Shielding shell of RJ45 jack; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins. Use in 250MHz applications. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to ANSI/TIA/EIA-568 B.2-1 Mates with modular plug conforming to FCC Part 68 Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: ZN Plating, then powder coated Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-042 Description 24 port FTP Cat. 6 patch panel, 1U, 110 & Krone Dual Type 15

20 STRUCTURED CABLING PRODUCTS CAT.6 FTP CABLING SYSTEM Keystone Jack (Cat6 FTP) Product Description: NB-COP-055 Shielded KJ. The products are used in the equipment rooms & work area as communication connectors of the intelligent buildings. The product can resist the Electro Magnetic Interference (EMI) effectively with the compact full-closed shielding structure. According to the requirement of T568A & T568B, the T568A & T568B labels are stuck on both sides of the product to give an exact guide. Connecting: RJ45 port for FTP patch cord and the IDC port for FTP horizontal cabling. According to the ROHS requirement. Inserting Duration: 750 times. Punching Duration: 250 times. Testing condition of transmitting capability; 250MHz. NB-COP-094 Electrical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min CAT6 Permanent Link: Conform to ANSI/TIA/EIA-568 B.2-1 Environmental: Mechanical: Storage: -40 C to +85 C Operation: 0 C to 70 C Mates with modular plug conforming to FCC Part 68, Subpart F. Shield Material: Brass T=0.30mm Nickel Plating Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm Nickel Plating Wire: AWG Part No. NB-COP-055 NB-COP-094 Description Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, FTP Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, FTP Cat.6 FTP RJ45 Plug Product Description: Housing: Polycarbonate Contact: Copper alloy 50u gold plated over nickel AWG stranded & solid wire Durability: 750 cycles Min. Exceed category 6 specifications Use with the universal RJ crimp tool P/N: NB-COP

21 STRUCTURED CABLING PRODUCTS Cat. 5E UTP 100 MHz Solid Cable CAT.5E UTP CABLING SYSTEM Application: Industry Standard: 10BASE-T/100BASE-TX/1000BASE-T 55-Mbps/155-Mbps & 622-Mbps ATM 4-Mbps/16-Mbps Token Ring 100-Mbps TP-PMD ISDN Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Cable Data: 305m(1,000ft) pull Box 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.20 Insulation Dia (±0.03mm): 0.91 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 5.1mm Average jacket thickness : 0.5mm Weight: 10kg/305m Minimum bend radius: O.D.*4-6 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +75 C Electronic Characteristics: Electrical Performance (at 100 MHz): MHz Impedance: 100± 15 ohms MHz Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 93.8 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color PVC LSZH CMR White NB-COP-008 NB-COP-008-LSOH NB-COP-008-CMR Gray NB-COP-007 NB-COP-007-LSOH NB-COP-007-CMR Blue NB-COP-080 NB-COP-080-LSOH NB-COP-080-CMR Red NB-COP-082 NB-COP-082-LSOH NB-COP-082-CMR Yellow NB-COP-081 NB-COP-081-LSOH NB-COP-081-CMR Green NB-COP-221 NB-COP-221-LSOH NB-COP-221-CMR Orange NB-COP-222 NB-COP-222-LSOH NB-COP-222-CMR Black NB-COP-223 NB-COP-223-LSOH NB-COP-223-CMR 17

22 STRUCTURED CABLING PRODUCTS CAT.5E UTP CABLING SYSTEM Cat. 5E UTP 100 MHz Solid Cable (Outdoor Grade) Application: Industry Standard: 10BASE-T/100BASE-TX/1000BASE-T 55-Mbps/155-Mbps & 622-Mbps ATM 4-Mbps/16-Mbps Token Ring 100-Mbps TP-PMD ISDN Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Cable Data: 305m(1,000ft) Reel 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.20 Insulation Dia (±0.03mm): 1.0mm Overall PE jacket (RoHS) Outer diameter (±1.0mm): 5.4mm Average jacket thickness : 0.5mm Weight: 12kg/305m Minimum bend radius: O.D.*4-6 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +85 C Electronic Characteristics: Electrical Performance (at 100 MHz): MHz Impedance: 100± 15 ohms MHz Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 93.8 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color Black P/N NB-COP

23 STRUCTURED CABLING PRODUCTS Cat.5E 100-MHz, 4 Pair UTP Patch Cords CAT.5E UTP CABLING SYSTEM Application: 10Base-T Ethernet (IEEE802.3) Fast Ethernet (IEEE 802.3u) ATM 155 Token Ring TP-PMD Audio 1000Base-T Voice Cable Data: Industry Standard: Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Electronic Characteristics: 24 AWG Stranded Copper Conductor 50u Gold Plated on the plug Contacts Temperature Range: -20 C to +75 C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Length White Blue Green Red Gray 1M NB-COP-026 NB-COP-030 NB-COP-100 NB-COP-104 NB-COP-108 2M NB-COP-027 NB-COP-031 NB-COP-101 NB-COP-105 NB-COP-109 3M NB-COP-028 NB-COP-032 NB-COP-102 NB-COP-106 NB-COP-110 5M NB-COP-029 NB-COP-033 NB-COP-103 NB-COP-107 NB-COP

24 STRUCTURED CABLING PRODUCTS CAT.5E UTP CABLING SYSTEM Cat.5e 100-MHz UTP Patch Panel 24 Port Patch Panel 48 Port Patch Panel Rear Cable Management Bar Product Description: Electrical: 24-port 1U / 48-port 2U patch panels, Cat5e UTP type. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent. Combined cable management bar. Universal wiring, panels are supplied with labeling for both T568A and T568B. 110 and Krone dual type IDC termination. Use in 100MHz applications. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68, Sub part F. Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-045 NB-COP-043 NB-COP-044 Description 24 port Unshielded Cat. 5E patch panel, Colored 24 port Unshielded Cat. 5E patch panel with Rear cable management bar 48 port Unshielded Cat. 5E patch panel with Rear cable management bar 20

25 STRUCTURED CABLING PRODUCTS Cat5e UTP Keystone Jack NB-COP-057 CAT.5E UTP CABLING SYSTEM Product Description: Electrical: Keystone jack, Cat5e class, UTP Type, fit for connecting application of communication ports in working area. Inserting duration: 750 times. Punching duration: 250 times. Testing condition of transmitting capability: 100MHz. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to TIA/EIA 568B Category 5e Mechanical: Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with Nickel Plating Wire: AWG Cat.5e UTP RJ45 Plug Product Description: Housing: Polycarbonate Contact: Copper alloy 50u gold plated over nickel AWG stranded & solid wire Durability: 750 cycles Min. Meet or exceed Cat5e specifications Use with the universal RJ crimp tool P/N: NB-COP

26 STRUCTURED CABLING PRODUCTS CAT.5E FTP CABLING SYSTEM Cat. 5E FTP 100 MHz Solid Cable Application: Industry Standard: 10BASE-T/100BASE-TX/1000BASE-T 55-Mbps/155-Mbps & 622-Mbps ATM 4-Mbps/16-Mbps Token Ring 100-Mbps TP-PMD ISDN Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Cable Data: 305m(1,000ft) pull Box 100% Aluminum foil tape screen 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.25 Insulation Dia (±0.03mm): 1.0 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 5.1mm Average jacket thickness : 0.5mm Weight: 11kg/305m Minimum bend radius: O.D.*6-8 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +75 C Electronic Characteristics: Electrical Performance (at 100 MHz): MHz Impedance: 100± 15 ohms MHz Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 93.8 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color PVC LSZH CMR Dark Gray NB-COP-083 NB-COP-083-LSOH NB-COP-083-CMR Blue NB-COP-084 NB-COP-084-LSOH NB-COP-084-CMR Red NB-COP-086 NB-COP-086-LSOH NB-COP-086-CMR Yellow NB-COP-085 NB-COP-085-LSOH NB-COP-085-CMR Green NB-COP-224 NB-COP-224-LSOH NB-COP-224-CMR Orange NB-COP-225 NB-COP-225-LSOH NB-COP-225-CMR Black NB-COP-226 NB-COP-226-LSOH NB-COP-226-CMR White NB-COP-009 NB-COP-009-LSOH NB-COP-009-CMR 22

27 STRUCTURED CABLING PRODUCTS Cat. 5E FTP 100 MHz Solid Cable (Outdoor Grade) CAT.5E FTP CABLING SYSTEM Application: Industry Standard: 10BASE-T/100BASE-TX/1000BASE-T 55-Mbps/155-Mbps & 622-Mbps ATM 4-Mbps/16-Mbps Token Ring 100-Mbps TP-PMD ISDN Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Cable Data: 305m(1,000ft) Reel 100% Aluminum foil tape screen 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.25 Insulation Dia (±0.03mm): 1.0 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 5.4mm Average jacket thickness : 0.5mm Weight: 11kg/305m Minimum bend radius: O.D.*6-8 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20 C to +85 C Electronic Characteristics: Electrical Performance (at 100 MHz): MHz Impedance: 100± 15 ohms MHz Impedance Delay scew 45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) 93.8 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) 13.8 Aging Elongation (%): 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): 85% of unaged Aging elongation (%): 50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Color Black P/N NB-COP

28 STRUCTURED CABLING PRODUCTS CAT.5E FTP CABLING SYSTEM Cat.5E 100-MHz, 4 Pair FTP Patch Cords Application: 10Base-T Ethernet (IEEE802.3) Fast Ethernet (IEEE 802.3u) ATM 155 Token Ring TP-PMD Audio 1000Base-T Voice Cable Data: Industry Standard: Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC IEC Electronic Characteristics: 24 AWG Stranded Copper Conductor Foil shielding protects against (EMI) & (RFI) 50u Gold Plated on the plug Contacts Temperature Range: -20 C to +75 C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B Frequency MHz Attenuation Db/100m NEXT db ACR db/100m P.Sum NEXT db EL-FEXT db/100m PS EL- FEXT Db/100m RL db Length White Blue Green Red Gray 1M NB-COP-034 NB-COP-037 NB-COP-113 NB-COP-117 NB-COP-121 2M NB-COP-035 NB-COP-038 NB-COP-114 NB-COP-118 NB-COP-122 3M NB-COP-036 NB-COP-039 NB-COP-115 NB-COP-119 NB-COP-123 5M NB-COP-125 NB-COP-112 NB-COP-116 NB-COP-120 NB-COP-124 Cat.5e FTP RJ45 Plug Product Description: Housing: Polycarbonate Contact: Copper alloy 50u gold plated over nickel AWG stranded & solid wire Durability: 750 cycles Min. Meet or exceed Cat5e specifications Use with the universal RJ crimp tool P/N: NB-COP

29 STRUCTURED CABLING PRODUCTS Cat.5E FTP Patch Panels Product Description: 24-port 1U patch panel, Cat5e FTP type. Cable management and grounding devices are combined in this patch panel. Universal wiring, panels are supplied with labeling for both T568A and T568B. Connecting: FCC port for Cat5e FTP patch cord and IDC for horizontal distribution in the cables. Compatibility: compatible for FTP Cat5e general cable distribution systems. 110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins; Shielding shell of Rj45 jack; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins. Use in 100MHz applications. Electrical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min CAT.5E FTP CABLING SYSTEM Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68 Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: S45C powder coating in black color Contact material: PC UL94V-0 Terminal, Phosphor bronze, TIN plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-046 Description 24 port FTP Cat. 5E patch panel Cat5E FTP Keystone Jack Product Description: NB-COP-058 Electrical: NB-COP-094 Keystone jack, Cat5e class, FTP Type, fit for connecting application of communication ports in working area. Inserting duration: 750 times. Punching duration: 250 times. Testing condition of transmitting capability: 100MHz. Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68, Subpart F. Mechanical: Shield Material: Brass T=0.30mm Nickel Plating Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material : FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm Nickel Plating Wire: AWG Part No. NB-COP-058 Description Cat.5e 110/ krone Right-angle (90º) Keystone Jack, T568A/B, FTP 25

30 STRUCTURED CABLING PRODUCTS STRUCTURED CABLING ACCESSORIES 86*86mm type face plate with shutter (1 &2 port ) NB-COP-192 NB-COP *86mm type face plate with shutter, 1 & 2 port, (Silver Plating) 86*86mm type face plate with shutter (1, 2 & 4 port ) NB-COP-069 NB-COP-068 NB-COP *70mm type face plate (1, 2 & 4 port ) NB-COP-198 NB-COP-199 NB-COP-070 NB-COP-071 NB-COP *86mm type Angled face plate (2 port ) LJ6C Low Profile Module NB-COP-075 NB-COP-230 NB-COP-074 RJ45 Cable Relief Boots White Orange Gray Blue Black Red Yellow Green NB-COP-062 NB-COP-168 NB-COP-063 NB-COP-064 NB-COP-171 NB-COP-066 NB-COP-096 NB-COP

31 End to End Telecom, Enterprise & Data Center Cabling Solutions TELECOM CABLING PRODUCTS CAT.3 UTP INDOOR CABLES 28 CAT.3 UTP OUTDOOR CABLES 29 ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES NON-ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES CAT.3 TELEPHONE PATCH PANEL & CAT.3 KEYSTONE JACK 34 VERTICAL DISTRIBUTION FRAM 35 TELECOM METAL CONNECTION BOXES TELECOM PLASTIC CONNECTION BOXES & LSA BLOCKS 39 TELECOM 110 BLOCKS & JUMPER CABLES

32 TELECOM CABLING PRODUCTS CAT.3 UTP INDOOR CABLES Cat.3 UTP Indoor Cables MHz Impedance: 100 ±15 ohms Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance unbalance (%)max 5.0 DC Resistance 20 C (ohm/100m) max 9.5 Test object: jacket Test material: PVC Before Aging tensile strength (Mpa) 13.5 Aging period (ºCxhrs): 100x24x10d Before Aging elongation (%): 350 After Aging elongation (%): 300 Cold bend (-20±2 ºCx 4hrs): no cracks PVC Outer Sheath Rip-cord Polyester No. of pairs Cable construction: Conductor Bare Solid Copper (0.5mm ±0.005mm) Insulation Test Standard Outer Sheath Outer Sheath Thickness Outer Sheath Diameter (mm) Packing HDPE (diameter: 0.87±0.02mm) TIA/EIA 568B & YD/T PVC 1.0±0.2mm 2 pair 4 pair 10 pair 20 pair 25 pair 50 pair 100 pair Pull box (305 Mtr) Pull box (305 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Weight (Approx) 6 kg 9 kg 80 kg 90 kg 100 kg 170 kg 300 kg Technical performance (100m): FREQUENCY MHz ATT ( db) RL ( db) DELAY ( ns) NEXT ( db) PSNEXT ( db) ELFEXT ( db) PSELFEXT ( db) No. of pairs PVC LSZH 2 NB-COP-195 NB-COP-195-LSOH 4 NB-COP-196 NB-COP-196-LSOH 10 NB-COP-194 NB-COP-194-LSOH 20 NB-COP-227 NB-COP-227-LSOH 25 NB-COP-087 NB-COP-087-LSOH 50 NB-COP-088 NB-COP-088-LSOH 100 NB-COP-089 NB-COP-089-LSOH 28

33 TELECOM CABLING PRODUCTS Cat.3 UTP Outdoor Cables MHz Impedance: 100 ±15 ohms Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance unbalance (%)max 5.0 DC Resistance 20 C (ohm/100m) max 9.5 Test object: jacket Test material: PE Before Aging tensile strength (Mpa) 13.5 Aging period (ºCxhrs): 100x24x10d Before Aging elongation (%): 350 After Aging elongation (%): 300 Cold bend (-20±2 ºCx 4hrs): no cracks PE Outer Sheath Rip-cord Waterproof tape Polyester No. of pairs CAT.3 UTP OUTDOOR CABLES Cable construction: Conductor Insulation Test Standard Outer Sheath Outer Sheath Thickness Outer Sheath Diameter (mm) Bare Solid Copper (0.5mm ±0.005mm) HDPE (diameter: 0.87±0.02mm) TIA/EIA 568B & YD/T Black LDPE 1.0±0.2mm 25 pair 50 pair 100 pair 11.6 ± ± ±0.3 Packing Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Weight (Approx) 105 kg 180 kg 315 kg Technical performance (100m): FREQUENCY MHz ATT ( db) RL ( db) DELAY ( ns) NEXT ( db) PSNEXT ( db) ELFEXT ( db) PSELFEXT ( db) No. of pairs P/N (PE Outer Sheath) 2 NB-COP-195-PE 4 NB-COP-196-PE 10 NB-COP-194-PE 20 NB-COP-227-PE 25 NB-COP-087-PE 50 NB-COP-088-PE 100 NB-COP-089-PE 29

34 TELECOM CABLING PRODUCTS ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES Armored Outdoor Jelly Filled Communication Cables LDPE outer sheath Corrugated steel tape Waterproof tape Filling compound Co-polyester coated Aluminium tape No. of pairs Polyester Inner Jacket 50 Pair construction Pair construction 200 Pair construction 300 Pair construction Cable construction: Conductor Bare Solid Copper (0.6mm) Insulation Solid HDPE Twisting Two single wires twisted Standard reference Comply to YD/T Cable core Each unit wrapped with double-color tape to form cable core Filler Jelly filled in the cable core Cable core wrapping Polyester wrapping tape, and then water blocking tape wrapping. Both helically wrapped. Armouring Corrugated steel tape Shield screeen 0.25mm thickness aluminium tape with plastic cover on both sides, longitude wrapped Outer Sheath Black LDPE Outer Sheath Diameter (mm) 50 pair 100 pair 200 pair 300 pair Weight (Approx)/km 1170kg 1810kg 2900kg 3990kg Volume / Drum/1000Mtrs 180x80x75cm 180x80x115cm 220x110x115cm 240x120x115cm Inner jacket Black PE Cable core and jacket thickness: Pairs Cable Construction Outside Jacket Inside Jacket thickness(mm) First layer Second layer thickness(mm) 50 2*(12+13) pair pair* pair*1 25 pair* pair*3 25 pair*

35 TELECOM CABLING PRODUCTS Armored Outdoor Jelly Filled Communication Cables Electrical characteristics: Test Items Indicators 0.6 mm conductor Dirrect Current Resistance of single conductor (Max) ohm/km 65.3 ohm/km Imbalance of Direct Current Resistance(Max) 5% Insulation resistance of each single insulated conductor to other shield or connected to the earth DC 500 V >3000M ohm/km Working Capacitance(800Khz/km) Max. 10p <=58nF/km Pair to Pair Capacitance(800Hz/300m) Max <=250 pf/km Electric Strength DC Time of Inputing Power Conductor to conductor Conductor to Shield 1 minute 1000 V 3000 V Insulation color code: ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES Pair No. Colour Code Pair No. Colour Code 1 White/Blue 14 Black/Brown 2 White/Orange 15 Black/Gray 3 White/Green 16 Yellow/Blue 4 White/Brown 17 Yellow/Orange 5 White/Gray 18 Yellow/Green 6 Red/Blue 19 Yellow/Brown 7 Red/Orange 20 Yellow/Gray 8 Red/Green 21 Purple/Blue 9 Red/Brown 22 Purple/Orange 10 Red/Gray 23 Purple/Green 11 Black/Blue 24 Purple/Brown 12 Black/Orange 25 Purple/Gray 13 Black/Green Ties chromatography: 50 pair 100 pair 200 pair 300 pair Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code 1 12 White/Blue 1 25 White/Blue 1 25 White/Blue 1 25 White/Blue 2 13 White/Blue 2 25 White/Orange 2 25 White/Orange 2 25 White/Orange 3 12 White/Orange 3 25 White/Green 3 25 White/Green 3 25 White/Green 4 13 White/Orange 4 25 White/Brown 4 25 White/Brown 4 25 White/Brown 5 25 White/Gray 5 25 White/Gray 6 25 Red/Blue 6 25 Red/Blue 7 25 Red/Orange 7 25 Red/Orange 8 25 Red/Green 8 25 Red/Green 9 25 Red/Brown Red/Gray Black/Blue Black/Orange No. of pairs P/N 50 NB-COP-231-RGD 100 NB-COP-232-RGD 200 NB-COP-233-RGD 300 NB-COP-234-RGD 31

36 NON-ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES TELECOM CABLING PRODUCTS Non-Armored Outdoor Jelly Filled Communication Cables Pair construction LDPE outer sheath Waterproof tape Filling compound Co-polyester coated Aluminium tape No. of pairs Polyester Pair construction 200 Pair construction 300 Pair construction Cable construction: Conductor Bare Solid Copper (0.6mm) Insulation Solid HDPE Twisting Two single wires twisted Standard reference Comply to YD/T Cable core Each unit wrapped with double-color tape to form cable core Filler Jelly filled in the cable core Cable core wrapping Polyester wrapping tape, and then water blocking tape wrapping. Both helically wrapped. Shield screeen 0.25mm thickness aluminium tape with plastic cover on both sides, longitude wrapped Outer Sheath Black LDPE Outer Sheath Diameter (mm) 50 pair 100 pair 200 pair 300 pair Weight (Approx)/km 620kg 1480kg 2410kg 3350kg Volume / Drum/1000Mtrs 130x50x75cm 160x80x115cm 200x100x115cm 220x110x115cm Cable core and jacket thickness: Pairs Cable Construction First layer Second layer Min. Jacket thickness(mm) 50 2*(12+13) pair pair* pair*1 25 pair* pair*3 25 pair*

37 TELECOM CABLING PRODUCTS Non-Armored Outdoor Jelly Filled Communication Cables Electrical characteristics: Test Items Indicators 0.6 mm conductor Dirrect Current Resistance of single conductor (Max) ohm/km 65.3 ohm/km Imbalance of Direct Current Resistance(Max) 5% Insulation resistance of each single insulated conductor to other shield or connected to the earth DC 500 V >3000M ohm/km Working Capacitance(800Khz/km) Max. 10p <=58nF/km Pair to Pair Capacitance(800Hz/300m) Max <=250 pf/km Electric Strength DC Time of Inputing Power Conductor to conductor Conductor to Shield 1 minute 1000 V 3000 V Insulation color code: Pair No. Colour Code Pair No. Colour Code 1 White/Blue 14 Black/Brown 2 White/Orange 15 Black/Gray 3 White/Green 16 Yellow/Blue 4 White/Brown 17 Yellow/Orange 5 White/Gray 18 Yellow/Green 6 Red/Blue 19 Yellow/Brown 7 Red/Orange 20 Yellow/Gray 8 Red/Green 21 Purple/Blue 9 Red/Brown 22 Purple/Orange 10 Red/Gray 23 Purple/Green 11 Black/Blue 24 Purple/Brown 12 Black/Orange 25 Purple/Gray 13 Black/Green NON-ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES Ties chromatography: 50 pair 100 pair 200 pair 300 pair Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code 1 12 White/Blue 1 25 White/Blue 1 25 White/Blue 1 25 White/Blue 2 13 White/Blue 2 25 White/Orange 2 25 White/Orange 2 25 White/Orange 3 12 White/Orange 3 25 White/Green 3 25 White/Green 3 25 White/Green 4 13 White/Orange 4 25 White/Brown 4 25 White/Brown 4 25 White/Brown 5 25 White/Gray 5 25 White/Gray 6 25 Red/Blue 6 25 Red/Blue 7 25 Red/Orange 7 25 Red/Orange 8 25 Red/Green 8 25 Red/Green 9 25 Red/Brown Red/Gray Black/Blue Black/Orange No. of pairs P/N 50 NB-COP NB-COP NB-COP NB-COP

38 TELECOM CABLING PRODUCTS CAT.3 TELEPHONE PATCH PANEL & CAT.3 KEYSTONE JACK Cat.3 Telephone Patch Panel Electrical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to ANSI/TIA/EIA 568B Category 3 Mates with modular plug conforming to FCC Part 68 Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG P/N NB-COP-092 NB-COP-093 Description Cat. 3 Telephone patch panel, 25 port, Krone IDC Cat. 3 Telephone patch panel, 50 port, Krone IDC Cat.3 Keystone Jack NB-COP-197 Product Description: Keystone jack, Cat3 class, UTP Type, fit for connecting application of communication ports in working area. Inserting duration: 750 times. Punching duration: 250 times. Environmental: Storage : -40 C to +85 C Operation: 0 C to 70 C Conform to ANSI/TIA/EIA 568B Category 3 Electrical: Mechanical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with Nickel Plating Wire: AWG

39 TELECOM CABLING PRODUCTS Vertical Distribution Frame Modular diatribution frame, which can either be wall mounted or installed back-to back for free standing applications. These frames are available in single and double vertical versions. The following features are offered within the frame construction: High durable, rigid frame factory assembled from coated steel Back-mount frames manufactured from stainless steel Hard wearing, coated steel jumper rings, wire guids and fanning strips for efficient cable management frame design allows easy access to top jumper rings Fully earth bounded. Meeting IEC regulation VERTICAL DISTRIBUTION FRAM 700 Pair 1400 Pair P/N NB-ACC- 050 NB-ACC- 051 Description Vertical Distribution Frame, 700 pair, Metal, Modules are not included Vertical Distribution Frame, 1400 pair, Metal, Modules are not included 35

40 TELECOM CABLING PRODUCTS TELECOM METAL CONNECTION BOXES Telecom Metal Connection Boxes Cold Rolled Steel Color: RAL Pair 200 Pair 36

41 TELECOM CABLING PRODUCTS Telecom Metal Connection Boxes 340 Pair TELECOM METAL CONNECTION BOXES 680 Pair 37

42 TELECOM CABLING PRODUCTS TELECOM METAL CONNECTION BOXES Telecom Metal Connection Boxes 1200 Pair P/N NB-ACC- 056 NB-ACC- 057 NB-ACC- 053 NB-ACC- 054 NB-ACC-055 Description 100 pair Metal Box, Dimension: 450mmx280mmx150mm, Modules are not included 200 pair Metal Box, Dimension: 690mmx280mmx150mm, Modules are not included 340 pair cabinet, Dimension: 1100mmx280mmx150mm, Modules are not included 680 pair cabinet.dimension: 1100mmx500mmx150mm, Modules are not included 1200 pair cabinet.dimension: 1100mmx720mmx150mm, Modules are not included 38

43 TELECOM CABLING PRODUCTS Telecom Plastic Connection Boxes 30 Pair 200 Pair 50 Pair TELECOM PLASTIC CONNECTION BOXES & LSA BLOCKS 100 Pair P/N NB-ACC-049 NB-ACC-031 NB-ACC-035 NB-ACC-042 Description Telephone Distribution Box, 200 pair, Plastic, Modules are not included Telephone Distribution Box, 100 pair, Plastic, Modules are not included Telephone Distribution Box, 50 pair, Plastic, Modules are not included Telephone Distribution Box, 30 pair, Plastic, Modules are not included Telecom LSA Blocks & Magazine Housing Material: ABS UL94V-2 Base Material: ABS UL94V-2 Contact Thickness: 0.5mm Contact Material: Phosphor Bronze Plating Over Nickel Over Silver Wire Sizes AWG: NB-ACC-022 NB-ACC-052 NB-ACC-029 P/N NB-ACC-025 NB-ACC-041 NB-ACC-022 NB-ACC-029 NB-ACC-023 NB-ACC-052 NB-ACC-025 Description Disconnecting Plug, Red color Single Protective Unit Connection Module, 10 pair 10 pair Magazine, 3 pole Arrester loaded Disconnection Module, 10 pair Label Holder for 10 Pair Module NB-ACC

44 TELECOM CABLING PRODUCTS TELECOM 110 BLOCKS & JUMPER CABLES Telecom 110 Blocks Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms 500 VDC Dielectric strength: 750 VAC RMS 60HZ, 1Min Material: PC UL94V-0 Terminals material: Phosphor bronze T: 0.8mm Wire: AWG 24 ~ 26 NB-ACC-039 NB-ACC-038 P/N NB-ACC-037 NB-ACC-038 NB-ACC-039 Description 110 Wiring Block, 50 pair 110 Wiring Block, 100 pair Plastic Cable Manager with Legs One Pair Jumper Cable NB-COP-150 NB-COP-228 NB-COP-178 Specification: Conductor diameter: 0.50mm 400 & 500 mtrs/roll 100% Oxygen Free highly pure copper, annealed high conductivity Insulation thickness : 0.27mm Jacket material : 100% Virgin Solid Polythene or PVC Diameter Over Insulation : 1.04mm Twisted Pair Lay Length : 50mm (Mutual Capacitance is 45Nf/Km) Coil in Small Plastic Drum and packed in cartons Choice of colors NB-COP-177 Color Green/White (400M) Blue/Yellow (400M) Red/White (500M) Blue/White (500M) P/N NB-COP-150 NB-COP-177 NB-COP-228 NB-COP

45 End to End Telecom, Enterprise & Data Center Cabling Solutions FIBER OPTIC PRODUCTS FIBER OPTIC CABLES FIBER OPTIC PATCH CORDS & PIGTAILS MULTI-FIBER PRE-TERMINATED FIBER OPTIC CABLES 68 FIBER OPTIC PATCH PANELS FIBER OPTIC ODF & ORGANIZER 72 FIBER OPTIC ADAPTERS/CONNECTORS/ATTENUATORS FIBER OPTIC SPLICING ACCESSORIES 75 OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC)

46 FIBER OPTIC PRODUCTS In-door Simplex & Duplex Optical Fiber Cables FIBER OPTIC CABLES Application: The interconnected cable contains double tight buffered fibers that are used as ideal cables of fiber to the workstation, patch cable in the closet, pigtails, patch cord, closet to the fetching port, fetching port to transceiver with their flexible tight buffer and high tensile aramid yarns armored. Features: Small bending radius, light weight. High flexible, small coiling trail. Easy to install and terminate. Flame retardant or LSZH outer sheath provides optimum safety features. Directly terminated with standard connectors with physical protection. Simplex Sheath Tight buffer fiber Aramid yarn Duplex Cable Data: Fiber Count Simplex Duplex Outer Diameter D*H(mm) * * *5.7 Nominal Weight (kg/km) Max. Tensile strength (N) Short-term 100N 150N 160N 200N 300N Long-term 60N 80N 80N 100N 160N Max. Crushing Resistance Short-term 1000N/100mm² Long-term 300N/100mm² Min. Bending Radius (mm) Dynamic 20D mm Static 10D mm Tight buffered characteristic OD:0.87±0.05mm, Thickness: 0.31±0.02mm Temperature Range (ºC) -20 ºC ºC Singlemode fiber Characteristics: 1310nm 0.4 db/km Attenuation 1550nm 0.3 db/km 1285~1330nm 3.5 Ps/nm.km Dispersion 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um 1 turn, 32mm diameter 0.50 db Bending dependence Induced attenuation(1550 nm) 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multi mode fiber Characteristics: 850nm 3.0 db/km Attenuation 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi ITEM SM 9/ 125 MM 50/ 125 MM 62.5/ 125 Simplex 2.0 mm NB-FOCA-073 NB-FOCA-075 NB-FOCA-074 Simplex 3.0 mm NB-FOCA-004 NB-FOCA-006 NB-FOCA-005 Duplex 1.6x3.3 mm NB-FOCA-107 NB-FOCA-108 NB-FOCA-109 Duplex 2.0x4.1mm NB-FOCA-070 NB-FOCA-071 NB-FOCA-072 Duplex 2.8x5.7mm NB-FOCA-001 NB-FOCA-002 NB-FOCA

47 FIBER OPTIC PRODUCTS In-door Distribution-Style Tight buffered Optical Fiber Cables Application: These cables contains multiple tight buffers that are used as distribution cables of entrance equipment, equipment room, computer room to the closet, especially suitable for horizontal installation in building. Features: Up to 24 tight buffer fibers Small bending radius, light weight. Metal free construction makes it immune to radio interference and electromagnetic interference. High flexible, small coiling trail. Aramid yarn for round strength Easy to install and terminate. Flame retardant or LSOH outer sheath provides optimum safety features. Easy splicing. Outer jacket Tight buffer fiber Kevlar FIBER OPTIC CABLES Cable Data: Fiber Count Outer Diameter D*H(mm) 4.8 ± ± ± ± ± ± ±0.5 Nominal Weight (kg/km) Max. Tensile strength (N) Short-term 270N 330N 480N 600N 720N 1000N 1600N Long-term 90N 110N 160N 200N 240N 330N 520N Max. Crushing Resistance Short-term 1000N/100mm² Long-term 300N/100mm² Min. Bending Radius (mm) Dynamic 20D mm Static 10D mm Tight buffered characteristic OD:0.87±0.05mm, Thickness: 0.31±0.02mm Temperature Range (ºC) -20 ºC ºC Singlemode fiber Characteristics: 1310nm 0.4 db/km Attenuation 1550nm 0.3 db/km 1285~1330nm 3.5 Ps/nm.km Dispersion 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um 1 turn, 32mm diameter 0.50 db Bending dependence Induced attenuation(1550 nm) 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multi mode fiber Characteristics: 850nm 3.0 db/km Attenuation 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi ITEM SM 9/ 125 MM 50/ 125 MM 62.5/ C (LSZH) NB-FOCA-007 NB-FOCA-008 NB-FOCA C (LSZH) NB-FOCA-011 NB-FOCA-012 NB-FOCA C (LSZH) NB-FOCA-014 NB-FOCA-015 NB-FOCA C (LSZH) NB-FOCA-017 NB-FOCA-018 NB-FOCA C (LSZH) NB-FOCA-020 NB-FOCA-021 NB-FOCA C (LSZH) NB-FOCA-110 NB-FOCA-111 NB-FOCA C (LSZH) NB-FOCA-113 NB-FOCA-114 NB-FOCA

48 FIBER OPTIC PRODUCTS FIBER OPTIC CABLES 10-Gigabit Multimode (OM3), 50-Micron In-door Distribution-Style Tight buffered Optical Fiber Cable Application: Features: These cables contains multiple tight buffers that are used as distribution cables of entrance equipment, equipment room, computer room to the closet, especially suitable for horizontal installation in building. Used in multi-gigabit Ethernet environments to patch and connect cabling systems Up to 48 tight buffer Fibers Small bending radius, light weight. Metal free construction makes it immune to radio interference and electromagnetic interference. High flexible, small coiling trail. Easy to install and terminate. Provide 10-Gig performance (at 850 nm), up to 300 meters Backwords compatible to lower speed applications Compatible with 10Mb/100Mb/1Gb/10Gb transceivers Compliant with TIA/EIA-568-B.3 Core: 50 µm, Cladding: 125 µm, Buffer: 900 µm Jacket: LSZH, Aqua fiber optic cable Outer jacket Tight buffer fiber Kevlar Cable Data: Fiber Count Outer Diameter D*H(mm) 4.8 ± ± ± ± ± ± ±0.5 Nominal Weight (kg/km) Max. Tensile strength (N) Short-term 270N 330N 480N 600N 720N 1000N 1600N Long-term 90N 110N 160N 200N 240N 330N 520N Max. Crushing Resistance Short-term 1000N/100mm² Long-term 300N/100mm² Min. Bending Radius (mm) Dynamic 20D mm Static 10D mm Tight buffered characteristic OD:0.87±0.05mm, Thickness: 0.31±0.02mm Temperature Range (ºC) -20 ºC ºC ITEM MM 50/ 125 OM3 MaxBand C NB-FOCA-116 6C NB-FOCA-078 8C NB-FOCA C NB-FOCA C NB-FOCA C NB-FOCA C NB-FOCA

49 FIBER OPTIC PRODUCTS 10-Gigabit Multimode (OM3), 50-Micron In-door Distribution-Style Tight buffered Optical Fiber Cable 10G MaxBand 300 fiber Characteristics: Characteristics Conditions Specified Values Optical Characteristics Attenuation 850nm 2.5 db / km 1300nm 0.7 db / km Overfilled Modal Bandwidth 850nm 1500 MHz km 1300nm 500 MHz km Effective Modal Bandwidth 850nm 2000 MHz km 10 Gb/s Ethernet link distance SX 850nm 300 m Differential Mode Delay Note: A minimum, effective system mode bandwidth length product of 2000 MHz km is achieved when combining this 50/125 μ m fiber with transmitters meeting the following transmitter power, power distribution (per FOTP-203): Flux at radius 19 μ m: 86%. (Ref: TIA-492AAAC) 850nm Anyone of the following template [ps/m]: DMD DMD Inner Mask DMD Outer Mask Templates (Radius 5~18μ m) (Radius 0~23μ m) Numerical Aperture (NA) 0.200±0.015 Group index of refraction (typical) 850nm nm Zero dispersion wavelength Zero dispersion lope 1295 ~ 1300nm 0.001(λ0~1190) ps / (nm² km) 1300 ~ 1320nm 0.11 ps / (nm² km)] Backscatter characteristics 1300nm 0.200±0.015 Step (Mean of bidirectional measurement) 0.10 db Irregularities over fiber length and point discontinuity 0.10 db Difference backscatter coefficient (bidirectional measurement) 0.08 db / km Geometrical Characteristics Core diameter 50±2.5 µ m Core non-circularity 6.0% Cladding Diameter 125.0±1.0 µ m Cladding non-circularity 1.0% Coating diameter 242±7 µ m Coating/cladding concentricity error 12.0 µ m Coating non-circularity 6.0% Core/cladding concentricity error 1.5 µ m Environmental Characteristics 850 nm, 1300 nm Temperature Dependence Induced attenuation -60 C to +85 C 0.10 db / km FIBER OPTIC CABLES Temperature humidity cycling Induced attenuation -10 C to +85, 90%R.H 0.20 db / km Damp heat Induced attenuation 85 C, 85%R.H.,30Days 0.20 db / km Watersoak dependence Induced attenuation 20 C for 30 Days 0.20 db / km Mechanical Characteristics Proof Test 9.0N off line 1.0% 100 KPSI Bending dependence 850 nm, 1300 nm 100 turns, 75mm diameter 0.50 db Typical average force Coating Strip force Peak Force Dynamic stress corrosion susceptibility parameter (nd, Typical) 1.7 N N 27 45

50 FIBER OPTIC PRODUCTS Ruggedized In-door Distribution-Style Tight buffered Optical Fiber Cables FIBER OPTIC CABLES Application: Features: Ideal for use in vertical cabling of buildings and LAN Ideal for use in tails of backbone network, and connect from outdoors to indoors directly Up to mmTight buffer Convenience for connection and construction High intensity and light weight Provide UV protection, waterproof, mouse-biting proof and mould proof, no cleft under stress, adapt to the environment for high fire rating Outer jacket Metal braid Tight buffer fiber Metal tube Inner jacket Kevlar Cable Data: Fiber Count Outer Diameter D*H(mm) 6.4 ± ± ± ±0.1 Nominal Weight (kg/km) Max. Tensile strength (N) 800N Max. Crushing Resistance 3000N/100mm² Min. Bending Radius (mm) Tight buffered characteristic OD:0.87±0.05mm, Thickness: 0.31±0.02mm Temperature Range (ºC) -40 ºC ºC Singlemode fiber Characteristics: Attenuation 1310nm 0.4 db/km 1550nm 0.3 db/km Dispersion 1285~1330nm 3.5 Ps/nm.km 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation(1550 nm) 1 turn, 32mm diameter 0.50 db 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multi mode fiber Characteristics: Attenuation 850nm 3.0 db/km 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi 46

51 FIBER OPTIC PRODUCTS Ruggedized In-door Distribution-Style Tight buffered Optical Fiber Cables 10G MaxBand 300 fiber Characteristics: Characteristics Conditions Specified Values Optical Characteristics Attenuation 850nm 2.5 db / km 1300nm 0.7 db / km Overfilled Modal Bandwidth 850nm 1500 MHz km 1300nm 500 MHz km Effective Modal Bandwidth 850nm 2000 MHz km 10 Gb/s Ethernet link distance SX 850nm 300 m Differential Mode Delay Note: A minimum, effective system mode bandwidth length product of 2000 MHz km is achieved when combining this 50/125 μ m fiber with transmitters meeting the following transmitter power, power distribution (per FOTP-203): Flux at radius 19 μ m: 86%. (Ref: TIA-492AAAC) 850nm Anyone of the following template [ps/m]: DMD DMD Inner Mask DMD Outer Mask Templates (Radius 5~18μ m) (Radius 0~23μ m) Numerical Aperture (NA) 0.200±0.015 Group index of refraction (typical) 850nm nm Zero dispersion wavelength Zero dispersion lope 1295 ~ 1300nm 0.001(λ0~1190) ps / (nm² km) 1300 ~ 1320nm 0.11 ps / (nm² km)] Backscatter characteristics 1300nm 0.200±0.015 Step (Mean of bidirectional measurement) 0.10 db Irregularities over fiber length and point discontinuity 0.10 db Difference backscatter coefficient (bidirectional measurement) 0.08 db / km Geometrical Characteristics Core diameter 50±2.5 µ m Core non-circularity 6.0% Cladding Diameter 125.0±1.0 µ m Cladding non-circularity 1.0% Coating diameter 242±7 µ m Coating/cladding concentricity error 12.0 µ m Coating non-circularity 6.0% Core/cladding concentricity error 1.5 µ m Environmental Characteristics 850 nm, 1300 nm Temperature Dependence Induced attenuation -60 C to +85 C 0.10 db / km FIBER OPTIC CABLES Temperature humidity cycling Induced attenuation -10 C to +85, 90%R.H 0.20 db / km Damp heat Induced attenuation 85 C, 85%R.H.,30Days 0.20 db / km Watersoak dependence Induced attenuation 20 C for 30 Days 0.20 db / km Mechanical Characteristics Proof Test 9.0N off line 1.0% 100 KPSI Bending dependence 850 nm, 1300 nm 100 turns, 75mm diameter 0.50 db Typical averageforce Coating Strip force Peak Force Dynamic stress corrosion susceptibility parameter (nd, Typical) 1.7 N N 27 ITEM SM 9/125 MM 50/ 125 MM 50/ 125 OM3 MaxBand 300 MM 62.5/ C (LSZH) NB-FOCA-007-RGD NB-FOCA-008-RGD NB-FOCA-116-RGD NB-FOCA-009-RGD 6 C (LSZH) NB-FOCA-011-RGD NB-FOCA-012-RGD NB-FOCA-078-RGD NB-FOCA-013-RGD 8 C (LSZH) NB-FOCA-014-RGD NB-FOCA-015-RGD NB-FOCA-093-RGD NB-FOCA-016-RGD 12 C (LSZH) NB-FOCA-017-RGD NB-FOCA-018-RGD NB-FOCA-079-RGD NB-FOCA-019-RGD 47

52 FIBER OPTIC PRODUCTS Outdoor / Indoor Loose-Tube (Centrally Bundled) Optical Fiber Cable FIBER OPTIC CABLES Application: The Minicables are suitable for installation in duct & aerial environment. They are also suitable for high voltage and low voltage crossing route. Features: Up to 12 fibers Non metallic construction providing excellent lightning strike resistance. Aramid yarns armor providing excellent strain performance. Flexible, light weight provides ease of installation. Compact structure, super small outer diameter. Fiber protected by filling compound LSZH optional jacket PE Jacket Aramid yarn PBT loose tube Fibers Fiber filling compound Cable Data: Fiber Count Outer Diameter D*H(mm) 8.3 ±0.3mm Nominal Weight (kg/km) 42 Temperature Range (ºC) -40 ºC ºC Jacket Material & Thickness (mm) MDPE 1.5 mm PBT Loose tube outer diameter (mm) 2.15mm ±0.10mm Loose tube gel Waterproof gel Package Wooden drum Length per drum 2km/drum Min. Bending Radius (mm) Dynamic 10D mm Static 15D mm Max. Tensile strength (N) Short-term 1500N Long-term 800N Max. Crushing Resistance 2000N/100mm² Singlemode fiber Characteristics: Attenuation 1310nm 0.4 db/km 1550nm 0.3 db/km Dispersion 1285~1330nm 3.5 Ps/nm.km 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation(1550 nm) 1 turn, 32mm diameter 0.50 db 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multi mode fiber Characteristics: Attenuation 850nm 3.0 db/km 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi 48

53 FIBER OPTIC PRODUCTS Outdoor / Indoor Loose-Tube (Centrally Bundled) Optical Fiber Cable 10G MaxBand 300 fiber Characteristics: Characteristics Conditions Specified Values Optical Characteristics Attenuation 850nm 2.5 db / km 1300nm 0.7 db / km Overfilled Modal Bandwidth 850nm 1500 MHz km 1300nm 500 MHz km Effective Modal Bandwidth 850nm 2000 MHz km 10 Gb/s Ethernet link distance SX 850nm 300 m Differential Mode Delay Note: A minimum, effective system mode bandwidth length product of 2000 MHz km is achieved when combining this 50/125 μ m fiber with transmitters meeting the following transmitter power, power distribution (per FOTP-203): Flux at radius 19 μ m: 86%. (Ref: TIA-492AAAC) 850nm Anyone of the following template [ps/m]: DMD DMD Inner Mask DMD Outer Mask Templates (Radius 5~18μ m) (Radius 0~23μ m) Numerical Aperture (NA) 0.200±0.015 Group index of refraction (typical) 850nm nm Zero dispersion wavelength Zero dispersion lope 1295 ~ 1300nm 0.001(λ0~1190) ps / (nm² km) 1300 ~ 1320nm 0.11 ps / (nm² km)] Backscatter characteristics 1300nm 0.200±0.015 Step (Mean of bidirectional measurement) 0.10 db Irregularities over fiber length and point discontinuity 0.10 db Difference backscatter coefficient (bidirectional measurement) 0.08 db / km Geometrical Characteristics Core diameter 50±2.5 µ m Core non-circularity 6.0% Cladding Diameter 125.0±1.0 µ m Cladding non-circularity 1.0% Coating diameter 242±7 µ m Coating/cladding concentricity error 12.0 µ m Coating non-circularity 6.0% Core/cladding concentricity error 1.5 µ m Environmental Characteristics 850 nm, 1300 nm Temperature Dependence Induced attenuation -60 C to +85 C 0.10 db / km FIBER OPTIC CABLES Temperature humidity cycling Induced attenuation -10 C to +85, 90%R.H 0.20 db / km Damp heat Induced attenuation 85 C, 85%R.H.,30Days 0.20 db / km Watersoak dependence Induced attenuation 20 C for 30 Days 0.20 db / km Mechanical Characteristics Proof Test 9.0N off line 1.0% 100 KPSI Bending dependence 850 nm, 1300 nm 100 turns, 75mm diameter 0.50 db Coating Strip force Dynamic stress corrosion susceptibility parameter (nd, Typical) Typical averageforce Peak Force 1.7 N N 27 ITEM SM 9/ 125 MM 50/ 125 MM 50/ 125 OM3 MaxBand 300 MM 62.5/ C NB -FOCA-023 NB -FOCA-024 NB-FOCA-024-OM3 NB -FOCA C NB -FOCA-026 NB -FOCA-028 NB-FOCA-028-OM3 NB -FOCA C NB -FOCA-030 NB-FOCA-031 NB-FOCA-031-OM3 NB -FOCA C NB -FOCA-033 NB -FOCA-034 NB-FOCA-034-OM3 NB -FOCA

54 FIBER OPTIC PRODUCTS Armoured Loose-Tube (Centrally Bundled) Outdoor Optical Fiber Cable FIBER OPTIC CABLES Application: These central loose tube cables are suitable for installation in Duct, Direct buried & aerial environment for long haul communication, LAN. Features: Up to 12 fibers Two parallel round steel wires enhance tensile strength Tension & crush resistance Good mechanical performance Jacket with ultra violet resistance property Fiber protected by filling compound LSZH optional jacket Fiber filling compound Optical Fibers PBT loose Parallel steel wire strength member Steel Polyethylene laminate Water barrier PE Jacket Cable Data: Fiber Count Outer Diameter D*H(mm) 8.3±0.15mm 9.0±0.15mm Nominal Weight (kg/km) Temperature Range (ºC) -40 ºC ºC Jacket Material & Thickness (mm) MDPE 1.5 mm PBT Loose tube diameter (mm) 2.2mm ±0.10mm Loose tube gel Waterproof gel Package Wooden drum Length per drum 2km/drum Min. Bending Radius (mm) Dynamic 20D mm Static 10D mm Max. Tensile strength (N) Short-term 2500N Long-term 800N Max. Crushing Resistance 2800N/100mm² Singlemode fiber Characteristics: Attenuation 1310nm 0.4 db/km 1550nm 0.3 db/km Dispersion 1285~1330nm 3.5 Ps/nm.km 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation(1550 nm) 1 turn, 32mm diameter 0.50 db 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multimode fiber Characteristics: Attenuation 850nm 3.0 db/km 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi 50

55 FIBER OPTIC PRODUCTS Armoured Loose-Tube (Centrally Bundled) Outdoor Optical Fiber Cable 10G MaxBand 300 fiber Characteristics: Characteristics Conditions Specified Values Optical Characteristics Attenuation 850nm 2.5 db / km 1300nm 0.7 db / km Overfilled Modal Bandwidth 850nm 1500 MHz km 1300nm 500 MHz km Effective Modal Bandwidth 850nm 2000 MHz km 10 Gb/s Ethernet link distance SX 850nm 300 m Differential Mode Delay Note: A minimum, effective system mode bandwidth length product of 2000 MHz km is achieved when combining this 50/125 μ m fiber with transmitters meeting the following transmitter power, power distribution (per FOTP-203): Flux at radius 19 μ m: 86%. (Ref: TIA-492AAAC) 850nm Anyone of the following template [ps/m]: DMD DMD Inner Mask DMD Outer Mask Templates (Radius 5~18μ m) (Radius 0~23μ m) Numerical Aperture (NA) 0.200±0.015 Group index of refraction (typical) 850nm nm Zero dispersion wavelength Zero dispersion lope 1295 ~ 1300nm 0.001(λ0~1190) ps / (nm² km) 1300 ~ 1320nm 0.11 ps / (nm² km)] Backscatter characteristics 1300nm 0.200±0.015 Step (Mean of bidirectional measurement) 0.10 db Irregularities over fiber length and point discontinuity 0.10 db Difference backscatter coefficient (bidirectional measurement) 0.08 db / km Geometrical Characteristics Core diameter 50±2.5 µ m Core non-circularity 6.0% Cladding Diameter 125.0±1.0 µ m Cladding non-circularity 1.0% Coating diameter 242±7 µ m Coating/cladding concentricity error 12.0 µ m Coating non-circularity 6.0% Core/cladding concentricity error 1.5 µ m Environmental Characteristics 850 nm, 1300 nm Temperature Dependence Induced attenuation -60 C to +85 C 0.10 db / km FIBER OPTIC CABLES Temperature humidity cycling Induced attenuation -10 C to +85, 90%R.H 0.20 db / km Damp heat Induced attenuation 85 C, 85%R.H.,30Days 0.20 db / km Watersoak dependence Induced attenuation 20 C for 30 Days 0.20 db / km Mechanical Characteristics Proof Test 9.0N off line 1.0% 100 KPSI Bending dependence 850 nm, 1300 nm 100 turns, 75mm diameter 0.50 db Coating Strip force Dynamic stress corrosion susceptibility parameter (nd, Typical) Typical averageforce Peak Force 1.7 N N 27 ITEM SM 9/ 125 MM 50/ 125 MM 50/ 125 OM3 MaxBand 300 MM 62.5/ C NB-FOCA-045 NB-FOCA-046 NB-FOCA-046-OM3 NB-FOCA C NB-FOCA-048 NB-FOCA-049 NB-FOCA-049-OM3 NB-FOCA C NB-FOCA-051 NB-FOCA-052 NB-FOCA-052-OM3 NB-FOCA C NB-FOCA-054 NB-FOCA-055 NB-FOCA-055-OM3 NB-FOCA

56 FIBER OPTIC PRODUCTS Armored Direct Buried Double Sheath Loose Tube Optical fiber Cable FIBER OPTIC CABLES Application: These corrugated steel tape armored and double sheath cables are suitable for installation in harsh environments where mechanical impact on the cable is to be expected, e.g. direct buried application. They are also suitable for installation in ducts where the rodent resistance is to be expected Features: Up to 144 fibers High tensile strength, good performance on mechanical stress, crush resistance, temperature and transmission. High Young s modulus phosphatized steel wire as central strength member, PE buffer extruded to outside of steel wire when necessary The loose tubes, cable core and all interstices filled with moisture-proof gel and compound, prevent water ingress longitudinally. The aluminum tape laminated on both sides with polyethylene and close bonded PE inner sheath possesses the function of radial moistureproof for the cable. Longitudinal water blocking tape at the inner side of the steel tape tightly bonded to the MDPE sheath ensures radial moisture proof and reinforces mechanical crush resistance as well as prevents water ingress longitudinally. Corrugated steel tape armored and double PE sheath providing excellent crush resistance and rodent resistance. PE outer sheath Corrugated steel tape Moisture barrier PE Inner sheath Central strength member Loose tube filled with gel Optical fiber Water blocking tape Filler Cable Data: Fiber Count Outer Diameter D*H(mm) 12.0±0.5mm 13.0±0.5mm 14.0±0.5mm 16.0±0.5mm 18.5±0.5mm No. of tubes Nominal Weight (kg/km) Max. Tensile strength (N) Short-term Long-term Max. Crushing Resistance N/100mm² Min. Bending Radius (mm) Short-term Long-term Dynamic 25D Static 12.5D Blue,Orange,Green,Brown,Slate,White,Red,Black,Yellow,Violet,Pink,Aqua Armoured steel tape (thickness: 1.5mm) Steel wire Yes PBT loose tube, (Dia: 2.10mm ±0.15mm), (Nominal Thikness:0.3mm) Red, Green Asynthetic waterproof gel Polyethylene PE 1.0 mm PE 1.5 mm Wooden drum 2km/drum Fiber Identification Armouring Central strength member Alluminium moisture barrier Loose tubes Loose Tube Identification Loose Tube Gel Fillers Material Inner Sheath Material & Thickness (mm) Outer Sheath Material & Thickness (mm) Package Length per drum Temperature Range (ºC) -40 ºC ºC 52

57 FIBER OPTIC PRODUCTS Armored Direct Buried Double Sheath Loose Tube Optical fiber Cable Singlemode (G.652B) fiber Characteristics: Attenuation 1310nm 0.4 db/km 1550nm 0.3 db/km Dispersion 1285~1330nm 3.5 Ps/nm.km 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation(1550 nm) 1 turn, 32mm diameter 0.50 db 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi FIBER OPTIC CABLES Multi mode fiber Characteristics: Attenuation 850nm 3.0 db/km 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi Singlemode (G.652D) fiber Characteristics: Characteristics Conditions Specified Values Attenuation 1310 nm 1383 nm 1550 nm 1625 nm 0.34 db / km 0.34 db / km 0.20 db / km 0.24 db / km Attenuation vs. Wavelength Max. a difference nm nm 0.03 db / km 0.02 db / km Dispersion coefficient Zero Dispersion Slope Typical Value PMD Maximum Individual Fiber Link Design Value (M=20, Q=0.01%) Typical Value Cable cutoff wavelength λ cc Mode Field diameter (MFD) Effective group index of refraction Point of discontinuities Geometrical Characteristics Cladding diameter Cladding non-circularity Coating diameter Coating-cladding concentricity error Coating non-circularity Core-cladding concentricity error Curl (radius) nm 1550 nm 1625 nm 1310 nm 1550 nm 1310 nm 1550 nm 1310 nm 1550 nm ps/(nm km) 18 ps/(nm km) 22 ps/(nm km) ps/(nm² km) ps/(nm² km) 0.2 ps/ km 0.1 ps/ km 0.04 ps/ km 1260 nm 9.2±0.4 μm 10.4± μm db 0.05 db 124.8±0.7 μm 0.7% 245±5 μm 12.0 μm 6.0% 0.5 μm 4 m 53

58 FIBER OPTIC PRODUCTS FIBER OPTIC CABLES Armored Direct Buried Double Sheath Loose Tube Optical fiber Cable Tactic Rule for Loose Tube and Fiber: Fiber count Number of Loose Tube Red Green Nature Nature Nature Nature Nature Nature Nature Nature Nature Nature 2 ~ 12 Filler Filler Filler Filler Tube 14 ~ 24 Filler Filler Filler Tube Tube 26 ~ 36 Filler Filler Tube Tube Tube 38 ~ 48 Filler Tube Tube Tube Tube 50 ~ 60 Tube Tube Tube Tube Tube 62 ~ 72 Tube Tube Tube Tube Tube Tube 74 ~ 84 Filler Tube Tube Tube Tube Tube Tube Tube 86 ~ 96 Tube Tube Tube Tube Tube Tube Tube Tube 98 ~ 108 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube 110 ~ 120 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube 122 ~ 132 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube 134 ~ 144 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube ITEM SM 9/ 125 (G652B) SM 9/ 125 (G652D) MM 50/ 125 MM 62.5/ Core NB-FOCA-094 NB-FOCA D NB-FOCA-095 NB-FOCA Core NB-FOCA-057 NB-FOCA D NB-FOCA-098 NB-FOCA Core NB-FOCA-087 NB-FOCA D NB-FOCA-088 NB-FOCA Core NB-FOCA-062 NB-FOCA D NB-FOCA-063 NB-FOCA Core NB-FOCA-090 NB-FOCA D NB-FOCA-091 NB-FOCA Core NB-FOCA-065 NB-FOCA D NB-FOCA-066 NB-FOCA Core NB-FOCA-068 NB-FOCA D NB-FOCA-119 NB-FOCA

59 FIBER OPTIC PRODUCTS Outdoor Non-metallic Duct & Direct Buried Double Sheath Loose Tube Optical fiber Cable Features: Up to 144 fibers The loose tube stranding technology make of the fibers have good secondary excess length and allow the fibers free movement in the tube, which keeps the fiber stress-free while the cable is subjected to longitudinal stress. Non metallic construction providing excellent electric magnetic resistance and lightning resistance. Non metallic central member and yarns armored providing excellent strain performance. Light weight, less additional load to tower FIBER OPTIC CABLES PE outer sheath Water blocking material PE Inner sheath Reinforcement yarns FRP Central strength member Loose tube filled with gel Optical fiber Rip cord Filler Water blocking tape Cable Data: Fiber Count Outer Diameter D*H(mm) 11.5± ± ± ± ±0.5 No. of tubes Nominal Weight (kg/km) Max. Tensile strength (N) Short-term Long-term Max. Crushing Resistance N/100mm² Min. Bending Radius (mm) Short-term Long-term Dynamic 20D Static 10D Blue,Orange,Green,Brown,Slate,White,Red,Black,Yellow,Violet,Pink,Aqua FRP PBT loose tube, (Dia: 2.10mm ±0.15mm), (Nominal Thikness:0.3mm) Red, Green Asynthetic waterproof gel Polyethylene Water proof gel Reinforcement yarns PE 1.0 mm PE 1.5 mm Wooden drum 2km/drum Fiber Identification Central strength member Loose tubes Loose Tube Identification Loose Tube Gel Fillers Material Flooding Compound Peripheral Strength Member Inner Sheath Material & Thickness (mm) Outer Sheath Material & Thickness (mm) Package Length per drum Temperature Range (ºC) -40 ºC ºC 55

60 FIBER OPTIC PRODUCTS FIBER OPTIC CABLES Outdoor Non-metallic Duct & Direct Buried Double Sheath Loose Tube Optical fiber Cable Multi mode fiber Characteristics: Attenuation 850nm 3.0 db/km 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi Singlemode (G.652D) fiber Characteristics: Characteristics Conditions Specified Values Attenuation 1310 nm 1383 nm 1550 nm 1625 nm 0.34 db / km 0.34 db / km 0.20 db / km 0.24 db / km Attenuation vs. Wavelength Max. a difference nm nm 0.03 db / km 0.02 db / km Dispersion coefficient Zero Dispersion Slope Typical Value PMD Maximum Individual Fiber Link Design Value (M=20, Q=0.01%) Typical Value Cable cutoff wavelength λ cc Mode Field diameter (MFD) Effective group index of refraction Point of discontinuities Geometrical Characteristics Cladding diameter Cladding non-circularity Coating diameter Coating-cladding concentricity error Coating non-circularity Core-cladding concentricity error Curl (radius) nm 1550 nm 1625 nm 1310 nm 1550 nm 1310 nm 1550 nm 1310 nm 1550 nm ps/(nm km) 18 ps/(nm km) 22 ps/(nm km) ps/(nm² km) ps/(nm² km) 0.2 ps/ km 0.1 ps/ km 0.04 ps/ km 1260 nm 9.2±0.4 μm 10.4± μm db 0.05 db 124.8±0.7 μm 0.7% 245±5 μm 12.0 μm 6.0% 0.5 μm 4 m 56

61 FIBER OPTIC PRODUCTS Outdoor Non-metallic Duct & Direct Buried Double Sheath Loose Tube Optical fiber Cable Tactic Rule for Loose Tube and Fiber: Fiber count Number of Loose Tube Red Green Nature Nature Nature Nature Nature Nature Nature Nature Nature Nature FIBER OPTIC CABLES 2 ~ 12 Filler Filler Filler Filler Tube 14 ~ 24 Filler Filler Filler Tube Tube 26 ~ 36 Filler Filler Tube Tube Tube 38 ~ 48 Filler Tube Tube Tube Tube 50 ~ 60 Tube Tube Tube Tube Tube 62 ~ 72 Tube Tube Tube Tube Tube Tube 74 ~ 84 Filler Tube Tube Tube Tube Tube Tube Tube 86 ~ 96 Tube Tube Tube Tube Tube Tube Tube Tube 98 ~ 108 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube 110 ~ 120 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube 122 ~ 132 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube 134 ~ 144 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube EM IT SM 9/ 125 (G652D) MM 50/ 125 MM 62.5/ 125 4Core NB-FOCA D NB-FOCA-122 NB-FOCA-123 6Core NB-FOCA D NB-FOCA-125 NB-FOCA-126 8Core NB-FOCA D NB-FOCA-128 NB-FOCA Core NB-FOCA D NB-FOCA-101 NB-FOCA Core NB-FOCA D NB-FOCA-104 NB-FOCA Core NB-FOCA D NB-FOCA-082 NB-FOCA Core NB-FOCA D NB-FOCA-040 NB-FOCA Core NB-FOCA D NB-FOCA-085 NB-FOCA Core NB-FOCA D NB-FOCA-043 NB-FOCA Core NB-FOCA D NB-FOCA-131 NB-FOCA

62 FIBER OPTIC PRODUCTS FIBER OPTIC CABLES Stranded Loose tube Non-Armored Duct cable (Single jacket) Description: NetBox Single Jacket, Non-Armored Stranded Loose tube cables are lightweight with small diameter and designed for duct and aerial installation. The loose tube design with a metallic strength member provides stable performance over a wide range and is compatible with any telecommunication grade optical fiber. Cable Drawing Features: Up to 288 fibers The loose tube stranding technology make of the fibers have good secondary excess length and allow the fibers free movement in the tube, which keeps the fiber stress-free while the cable is subjected to longitudinal stress. Proven loose tube design allows for easy mid-span access and isolate fibers from installation and environmental rigors Dry core design for excellent water blocking performance and easier handling Fiber colors by IEC60304: Blue/Orange/Green/Brown/Grey/White/Red/Black/Yellow/Violet/Pink/Aqua Small diameter and lightweight. Polyethylene jacket is easy to strip, rugged and durable. Designed in accordance with applicable industry technical specifications, standards, and references including IEC and EN Technical Data: Item Description 4 Core 96 Core 1 Min.Bending radius (mm) Short term (loaded): 20*OD Long term (Installed): 10*OD Maximum tensile load (N) Nominal outer diameter (mm) ± 5% Nominal cable weight (Kg/Km) Crush resistance (N/10cm) Outer sheath Material MDPE MDPE Thickness 1.9mm 2.0mm Material PBT PBT 7 Loose tube Outer diameter 2.0mm 2.3mm Fibers/tube 4 Cores in a tube, (1) 12 Cores in a tube, (8) 8 Filler Material PP PP No Fiber type SM G.652B fibers SM G.652B fibers 10 Jelly compound Material Jelly Jelly 11 Central member Material Steel wire Steel wire Outer diameter Material --- PE 12 PE Up-coated Thickness Outer diameter Water swellable yarn No Rip cord No Temperature Operation/Storage -40C / 70C Installation -20C / 40C 58

63 FIBER OPTIC PRODUCTS Stranded Loose tube Non-Armored Duct cable (Single jacket) Singlemode (G.652D) fiber Characteristics: Characteristics Conditions Specified Values Attenuation 1310 nm 1383 nm 1550 nm 1625 nm 0.34 db / km 0.34 db / km 0.20 db / km 0.24 db / km Attenuation vs. Wavelength Max. a difference nm nm 0.03 db / km 0.02 db / km Dispersion coefficient Zero Dispersion Slope Typical Value PMD Maximum Individual Fiber Link Design Value (M=20, Q=0.01%) Typical Value Cable cutoff wavelength λ cc Mode Field diameter (MFD) Effective group index of refraction Point of discontinuities Geometrical Characteristics Cladding diameter Cladding non-circularity Coating diameter Coating-cladding concentricity error Coating non-circularity Core-cladding concentricity error Curl (radius) nm 1550 nm 1625 nm 1310 nm 1550 nm 1310 nm 1550 nm 1310 nm 1550 nm ps/(nm km) 18 ps/(nm km) 22 ps/(nm km) ps/(nm² km) ps/(nm² km) 0.2 ps/ km 0.1 ps/ km 0.04 ps/ km 1260 nm 9.2±0.4 μm 10.4± μm db 0.05 db 124.8±0.7 μm 0.7% 245±5 μm 12.0 μm 6.0% 0.5 μm 4 m FIBER OPTIC CABLES ITEM SM 9/ 125 (G652D) 4Core NB-FOCA D 96Core NB-FOCA D 59

64 FIBER OPTIC PRODUCTS FIBER OPTIC PATCH CORDS Fiber Optic Patch Cords NetBox fiber optic patch cords & pigtails provide the highest level of connectivity for all your fiber applications. Manufactured & tested to the tightest specifications, NetBox patch cords & pigtails exceeds Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentlly rugged connectors and cable assemblies ensure lasting, repeatable connections. Applications: Fast Ethernet, Data communication LAN and WAN High-speed Enterprise Servers Optical access and ATM Networks Equipment Multiplexores, Switches and Routers Optical Transport and Telecommunications Switching Equipment Features: Excellent Return Loss Low Insertion Loss Multimode & Singlemode Simplex & Duplex assemblies Cable sheath: LSZH standard (PVC on request), Telcordia GR-326-CORE Compliant IEC Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 terminations PC End-face polish, (UPC & APC on request) 2.0mm Outer Jacket diameter (1.6mm & 3.0mm on request) Performance Specifications: Single mode Multimode Connector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000 Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB Return Loss -35 to -65dB Mating durability (500 cycles) <0.2dB Back reflection (typical) 55dB 20dB Tensile strength >10Kg Operating Temperature: - 40 to + 85ºC Singlemode fiber Characteristics: 1310nm 0.4 db/km Attenuation 1550nm 0.3 db/km 1285~1330nm 3.5 Ps/nm.km Dispersion 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um 1 turn, 32mm diameter 0.50 db Bending dependence Induced attenuation(1550 nm) 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multimode fiber Characteristics: 850nm 3.0 db/km Attenuation 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi 60

65 FIBER OPTIC PRODUCTS ST ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-001 NB-FOPC-005 NB-FOPC M NB-FOPC-002 NB-FOPC-006 NB-FOPC M NB-FOPC-003 NB-FOPC-007 NB-FOPC M NB-FOPC-004 NB-FOPC-008 NB-FOPC M NB-FOPC-180 NB-FOPC-183 NB-FOPC M NB-FOPC-181 NB-FOPC-184 NB-FOPC M NB-FOPC-182 NB-FOPC-185 NB-FOPC-188 Custom Lengths Available ST MTRJ Duplex ST SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-013 NB-FOPC-017 NB-FOPC M NB-FOPC-014 NB-FOPC-018 NB-FOPC M NB-FOPC-015 NB-FOPC-019 NB-FOPC M NB-FOPC-016 NB-FOPC-020 NB-FOPC M NB-FOPC-171 NB-FOPC-191 NB-FOPC M NB-FOPC-189 NB-FOPC-192 NB-FOPC M NB-FOPC-190 NB-FOPC-193 NB-FOPC-196 Custom Lengths Available SC SC Duplex FIBER OPTIC PATCH CORDS Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-025 NB-FOPC-028 NB-FOPC M NB-FOPC-026 NB-FOPC-029 NB-FOPC M NB-FOPC-027 NB-FOPC-030 NB-FOPC M NB-FOPC-197 NB-FOPC-205 NB-FOPC M NB-FOPC-198 NB-FOPC-206 NB-FOPC M NB-FOPC-199 NB-FOPC-207 NB-FOPC M NB-FOPC-200 NB-FOPC-208 NB-FOPC-204 Custom Lengths Available Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-034 NB-FOPC-049 NB-FOPC M NB-FOPC-035 NB-FOPC-050 NB-FOPC M NB-FOPC-036 NB-FOPC-051 NB-FOPC M NB-FOPC-037 NB-FOPC-052 NB-FOPC M NB-FOPC-039 NB-FOPC-209 NB-FOPC M NB-FOPC-041 NB-FOPC-210 NB-FOPC M NB-FOPC-042 NB-FOPC-211 NB-FOPC-061 Custom Lengths Available SC MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-062 NB-FOPC-065 NB-FOPC M NB-FOPC-063 NB-FOPC-066 NB-FOPC M NB-FOPC-064 NB-FOPC-067 NB-FOPC M NB-FOPC-212 NB-FOPC-216 NB-FOPC M NB-FOPC-213 NB-FOPC-217 NB-FOPC M NB-FOPC-214 NB-FOPC-218 NB-FOPC M NB-FOPC-215 NB-FOPC-219 NB-FOPC-223 Custom Lengths Available MTRJ MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-071 NB-FOPC-076 NB-FOPC M NB-FOPC-072 NB-FOPC-077 NB-FOPC M NB-FOPC-073 NB-FOPC-078 NB-FOPC M NB-FOPC-224 NB-FOPC-226 NB-FOPC M NB-FOPC-074 NB-FOPC-227 NB-FOPC M NB-FOPC-075 NB-FOPC-228 NB-FOPC M NB-FOPC-225 NB-FOPC-229 NB-FOPC-231 Custom Lengths Available LC LC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-232 NB-FOPC-234 NB-FOPC M NB-FOPC-233 NB-FOPC-235 NB-FOPC M NB-FOPC-084 NB-FOPC-236 NB-FOPC M NB-FOPC-085 NB-FOPC-237 NB-FOPC M NB-FOPC-086 NB-FOPC-238 NB-FOPC M NB-FOPC-087 NB-FOPC-239 NB-FOPC M NB-FOPC-088 NB-FOPC-240 NB-FOPC-094 Custom Lengths Available LC SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-304 NB-FOPC-305 NB-FOPC M NB-FOPC-095 NB-FOPC-306 NB-FOPC M NB-FOPC-096 NB-FOPC-307 NB-FOPC M NB-FOPC-097 NB-FOPC-308 NB-FOPC M NB-FOPC-100 NB-FOPC-309 NB-FOPC M NB-FOPC-101 NB-FOPC-310 NB-FOPC M NB-FOPC-102 NB-FOPC-311 NB-FOPC-108 Custom Lengths Available 61

66 FIBER OPTIC PRODUCTS FIBER OPTIC PATCH CORDS LC ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-314 NB-FOPC-316 NB-FOPC M NB-FOPC-315 NB-FOPC-114 NB-FOPC M NB-FOPC-109 NB-FOPC-317 NB-FOPC M NB-FOPC-110 NB-FOPC-318 NB-FOPC M NB-FOPC-111 NB-FOPC-319 NB-FOPC M NB-FOPC-112 NB-FOPC-320 NB-FOPC M NB-FOPC-113 NB-FOPC-321 NB-FOPC-119 Custom Lengths Available LC FC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-324 NB-FOPC-325 NB-FOPC M NB-FOPC-120 NB-FOPC-326 NB-FOPC M NB-FOPC-121 NB-FOPC-327 NB-FOPC M NB-FOPC-122 NB-FOPC-328 NB-FOPC M NB-FOPC-123 NB-FOPC-329 NB-FOPC M NB-FOPC-124 NB-FOPC-330 NB-FOPC M NB-FOPC-125 NB-FOPC-331 NB-FOPC-131 Custom Lengths Available LC MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-333 NB-FOPC-335 NB-FOPC M NB-FOPC-334 NB-FOPC-336 NB-FOPC M NB-FOPC-132 NB-FOPC-337 NB-FOPC M NB-FOPC-133 NB-FOPC-338 NB-FOPC M NB-FOPC-134 NB-FOPC-339 NB-FOPC M NB-FOPC-135 NB-FOPC-340 NB-FOPC M NB-FOPC-136 NB-FOPC-341 NB-FOPC-142 Custom Lengths Available FC - FC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-243 NB-FOPC-245 NB-FOPC M NB-FOPC-244 NB-FOPC-246 NB-FOPC M NB-FOPC-143 NB-FOPC-247 NB-FOPC M NB-FOPC-144 NB-FOPC-248 NB-FOPC M NB-FOPC-147 NB-FOPC-249 NB-FOPC M NB-FOPC-148 NB-FOPC-250 NB-FOPC M NB-FOPC-149 NB-FOPC-251 NB-FOPC-155 Custom Lengths Available FC - SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-254 NB-FOPC-256 NB-FOPC M NB-FOPC-255 NB-FOPC-257 NB-FOPC M NB-FOPC-156 NB-FOPC-258 NB-FOPC M NB-FOPC-157 NB-FOPC-259 NB-FOPC M NB-FOPC-160 NB-FOPC-260 NB-FOPC M NB-FOPC-161 NB-FOPC-261 NB-FOPC M NB-FOPC-162 NB-FOPC-262 NB-FOPC-167 Custom Lengths Available FC - MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-265 NB-FOPC-271 NB-FOPC M NB-FOPC-170 NB-FOPC-272 NB-FOPC M NB-FOPC-266 NB-FOPC-273 NB-FOPC M NB-FOPC-267 NB-FOPC-274 NB-FOPC M NB-FOPC-268 NB-FOPC-275 NB-FOPC M NB-FOPC-269 NB-FOPC-276 NB-FOPC M NB-FOPC-270 NB-FOPC-277 NB-FOPC-282 Custom Lengths Available E2000 E2000 Simplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-283 NB-FOPC-290 NB-FOPC M NB-FOPC-284 NB-FOPC-291 NB-FOPC M NB-FOPC-285 NB-FOPC-292 NB-FOPC M NB-FOPC-286 NB-FOPC-293 NB-FOPC M NB-FOPC-287 NB-FOPC-294 NB-FOPC M NB-FOPC-288 NB-FOPC-295 NB-FOPC M NB-FOPC-289 NB-FOPC-296 NB-FOPC-303 Custom Lengths Available FC - ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-457 NB-FOPC-491 NB-FOPC M NB-FOPC-458 NB-FOPC-492 NB-FOPC M NB-FOPC-459 NB-FOPC-493 NB-FOPC M NB-FOPC-451 NB-FOPC-494 NB-FOPC M NB-FOPC-460 NB-FOPC-495 NB-FOPC M NB-FOPC-424 NB-FOPC-496 NB-FOPC M NB-FOPC-447 NB-FOPC-497 NB-FOPC-467 Custom Lengths Available 62

67 FIBER OPTIC PRODUCTS Ruggedized Fiber Optic Patch Cords NetBox fiber optic patch cords & pigtails provide the highest level of connectivity for all your fiber applications. Manufactured & tested to the tightest specifications, NetBox patch cords & pigtails exceeds Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentlly rugged connectors and cable assemblies ensure lasting, repeatable connections. Applications: FTTH Subway Temperature detector Power plant TV antenna All applications for which traditional patch-cords are used Features: SUS flexible armored tube keeps the fiber protected from damage Resisting the destroy caused by harsh environment & improper operation such as pull strength pressing, bending, improper twisting and bite of ants or mice Secure transmission power to avoid additional attenuation in case of bending, bundling, and heavy load. Easy and quick for replacement, can be handled as an electric wire Multimode & Singlemode Simplex & Duplex assemblies Cable sheath: LSZH standard (PVC on request), Telcordia GR-326-CORE Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 terminations PC End-face polish, (UPC & APC on request) 3.0mm Outer Jacket diameter RUGGEDIZED FIBER OPTIC PATCH CORDS Performance Specifications: Single mode Multimode Connector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000 Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB Return Loss -35 to -65dB Mating durability (500 cycles) <0.2dB Back reflection (typical) 55dB 20dB Tensile strength >20Kg Operating Temperature: - 40 to + 85ºC Singlemode fiber Characteristics: 1310nm 0.4 db/km Attenuation 1550nm 0.3 db/km 1285~1330nm 3.5 Ps/nm.km Dispersion 1550nm 18.0 Ps/nm.km Zero dispersion wavelength 1300~1324 Nm Zero dispersion slope Ps/nm.km Fiber cutoff wavelength 1260 Nm Mode field diameter 8.6±0.5 um Mode field concentricity <=0.8 um Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um 1 turn, 32mm diameter 0.50 db Bending dependence Induced attenuation(1550 nm) 100 turns, 60mm diameter 0.50 db Proof Test (offline) 100 kpsi Multi mode fiber Characteristics: 850nm 3.0 db/km Attenuation 1300nm 1.0 db/km 50/125 um 62.5/125 um Bandwidth 850 nm 200 MHz/km 850 nm 160 MHz/km 1300 nm 200 MHz/km 1300 nm 200 MHz/km Cladding diameter 125±1.0 um Cladding non-circularity 1.0 % Coating/cladding concentricity error 12.5 um Coating diameter 245±10 um Bending dependence Induced attenuation 100 turns, 75mm diameter 0.50 db at 850 nm\1300 nm Proof Test (offline) 100 kpsi 63

68 FIBER OPTIC PRODUCTS RUGGEDIZED FIBER OPTIC PATCH CORDS ST ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-001-RGD NB-FOPC-005-RGD NB-FOPC-009-RGD 2 M NB-FOPC-002-RGD NB-FOPC-006-RGD NB-FOPC-010-RGD 3 M NB-FOPC-003-RGD NB-FOPC-007-RGD NB-FOPC-011-RGD 5 M NB-FOPC-004-RGD NB-FOPC-008-RGD NB-FOPC-012-RGD 10 M NB-FOPC-180-RGD NB-FOPC-183-RGD NB-FOPC-186-RGD 20 M NB-FOPC-181-RGD NB-FOPC-184-RGD NB-FOPC-187-RGD 30 M NB-FOPC-182-RGD NB-FOPC-185-RGD NB-FOPC-188-RGD Custom Lengths Available ST MTRJ Duplex ST SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-013-RGD NB-FOPC-017-RGD NB-FOPC-021-RGD 2 M NB-FOPC-014-RGD NB-FOPC-018-RGD NB-FOPC-022-RGD 3 M NB-FOPC-015-RGD NB-FOPC-019-RGD NB-FOPC-023-RGD 5 M NB-FOPC-016-RGD NB-FOPC-020-RGD NB-FOPC-024-RGD 10 M NB-FOPC-171-RGD NB-FOPC-191-RGD NB-FOPC-194-RGD 20 M NB-FOPC-189-RGD NB-FOPC-192-RGD NB-FOPC-195-RGD 30 M NB-FOPC-190-RGD NB-FOPC-193-RGD NB-FOPC-196-RGD Custom Lengths Available SC SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-025-RGD NB-FOPC-028-RGD NB-FOPC-031-RGD 2 M NB-FOPC-026-RGD NB-FOPC-029-RGD NB-FOPC-032-RGD 3 M NB-FOPC-027-RGD NB-FOPC-030-RGD NB-FOPC-033-RGD 5 M NB-FOPC-197-RGD NB-FOPC-205-RGD NB-FOPC-201-RGD 10 M NB-FOPC-198-RGD NB-FOPC-206-RGD NB-FOPC-202-RGD 20 M NB-FOPC-199-RGD NB-FOPC-207-RGD NB-FOPC-203-RGD 30 M NB-FOPC-200-RGD NB-FOPC-208-RGD NB-FOPC-204-RGD Custom Lengths Available Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-034-RGD NB-FOPC-049-RGD NB-FOPC-053-RGD 2 M NB-FOPC-035-RGD NB-FOPC-050-RGD NB-FOPC-054-RGD 3 M NB-FOPC-036-RGD NB-FOPC-051-RGD NB-FOPC-055-RGD 5 M NB-FOPC-037-RGD NB-FOPC-052-RGD NB-FOPC-056-RGD 10 M NB-FOPC-039-RGD NB-FOPC-209-RGD NB-FOPC-058-RGD 20 M NB-FOPC-041-RGD NB-FOPC-210-RGD NB-FOPC-060-RGD 30 M NB-FOPC-042-RGD NB-FOPC-211-RGD NB-FOPC-061-RGD Custom Lengths Available SC MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-062-RGD NB-FOPC-065-RGD NB-FOPC-068-RGD 2 M NB-FOPC-063-RGD NB-FOPC-066-RGD NB-FOPC-069-RGD 3 M NB-FOPC-064-RGD NB-FOPC-067-RGD NB-FOPC-070-RGD 5 M NB-FOPC-212-RGD NB-FOPC-216-RGD NB-FOPC-220-RGD 10 M NB-FOPC-213-RGD NB-FOPC-217-RGD NB-FOPC-221-RGD 20 M NB-FOPC-214-RGD NB-FOPC-218-RGD NB-FOPC-222-RGD 30 M NB-FOPC-215-RGD NB-FOPC-219-RGD NB-FOPC-223-RGD Custom Lengths Available MTRJ MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-071-RGD NB-FOPC-076-RGD NB-FOPC-079-RGD 2 M NB-FOPC-072-RGD NB-FOPC-077-RGD NB-FOPC-080-RGD 3 M NB-FOPC-073-RGD NB-FOPC-078-RGD NB-FOPC-081-RGD 5 M NB-FOPC-224-RGD NB-FOPC-226-RGD NB-FOPC-230-RGD 10 M NB-FOPC-074-RGD NB-FOPC-227-RGD NB-FOPC-082-RGD 20 M NB-FOPC-075-RGD NB-FOPC-228-RGD NB-FOPC-083-RGD 30 M NB-FOPC-225-RGD NB-FOPC-229-RGD NB-FOPC-231-RGD Custom Lengths Available LC LC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-232-RGD NB-FOPC-234-RGD NB-FOPC-241-RGD 2 M NB-FOPC-233-RGD NB-FOPC-235-RGD NB-FOPC-242-RGD 3 M NB-FOPC-084-RGD NB-FOPC-236-RGD NB-FOPC-090-RGD 5 M NB-FOPC-085-RGD NB-FOPC-237-RGD NB-FOPC-091-RGD 10 M NB-FOPC-086-RGD NB-FOPC-238-RGD NB-FOPC-092-RGD 20 M NB-FOPC-087-RGD NB-FOPC-239-RGD NB-FOPC-093-RGD 30 M NB-FOPC-088-RGD NB-FOPC-240-RGD NB-FOPC-094-RGD Custom Lengths Available LC SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-304-RGD NB-FOPC-305-RGD NB-FOPC-312-RGD 2 M NB-FOPC-095-RGD NB-FOPC-306-RGD NB-FOPC-313-RGD 3 M NB-FOPC-096-RGD NB-FOPC-307-RGD NB-FOPC-104-RGD 5 M NB-FOPC-097-RGD NB-FOPC-308-RGD NB-FOPC-105-RGD 10 M NB-FOPC-100-RGD NB-FOPC-309-RGD NB-FOPC-106-RGD 20 M NB-FOPC-101-RGD NB-FOPC-310-RGD NB-FOPC-107-RGD 30 M NB-FOPC-102-RGD NB-FOPC-311-RGD NB-FOPC-108-RGD Custom Lengths Available 64

69 FIBER OPTIC PRODUCTS LC ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-314-RGD NB-FOPC-316-RGD NB-FOPC-322-RGD 2 M NB-FOPC-315-RGD NB-FOPC-114-RGD NB-FOPC-323-RGD 3 M NB-FOPC-109-RGD NB-FOPC-317-RGD NB-FOPC-115-RGD 5 M NB-FOPC-110-RGD NB-FOPC-318-RGD NB-FOPC-116-RGD 10 M NB-FOPC-111-RGD NB-FOPC-319-RGD NB-FOPC-117-RGD 20 M NB-FOPC-112-RGD NB-FOPC-320-RGD NB-FOPC-118-RGD 30 M NB-FOPC-113-RGD NB-FOPC-321-RGD NB-FOPC-119-RGD Custom Lengths Available LC MTRJ Duplex LC FC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-324-RGD NB-FOPC-325-RGD NB-FOPC-332-RGD 2 M NB-FOPC-120-RGD NB-FOPC-326-RGD NB-FOPC-126-RGD 3 M NB-FOPC-121-RGD NB-FOPC-327-RGD NB-FOPC-127-RGD 5 M NB-FOPC-122-RGD NB-FOPC-328-RGD NB-FOPC-128-RGD 10 M NB-FOPC-123-RGD NB-FOPC-329-RGD NB-FOPC-129-RGD 20 M NB-FOPC-124-RGD NB-FOPC-330-RGD NB-FOPC-130-RGD 30 M NB-FOPC-125-RGD NB-FOPC-331-RGD NB-FOPC-131-RGD Custom Lengths Available FC - FC Duplex RUGGEDIZED FIBER OPTIC PATCH CORDS Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-333-RGD NB-FOPC-335-RGD NB-FOPC-342-RGD 2 M NB-FOPC-334-RGD NB-FOPC-336-RGD NB-FOPC-137-RGD 3 M NB-FOPC-132-RGD NB-FOPC-337-RGD NB-FOPC-138-RGD 5 M NB-FOPC-133-RGD NB-FOPC-338-RGD NB-FOPC-139-RGD 10 M NB-FOPC-134-RGD NB-FOPC-339-RGD NB-FOPC-140-RGD 20 M NB-FOPC-135-RGD NB-FOPC-340-RGD NB-FOPC-141-RGD 30 M NB-FOPC-136-RGD NB-FOPC-341-RGD NB-FOPC-142-RGD Custom Lengths Available Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-243-RGD NB-FOPC-245-RGD NB-FOPC-252-RGD 2 M NB-FOPC-244-RGD NB-FOPC-246-RGD NB-FOPC-253-RGD 3 M NB-FOPC-143-RGD NB-FOPC-247-RGD NB-FOPC-151-RGD 5 M NB-FOPC-144-RGD NB-FOPC-248-RGD NB-FOPC-152-RGD 10 M NB-FOPC-147-RGD NB-FOPC-249-RGD NB-FOPC-153-RGD 20 M NB-FOPC-148-RGD NB-FOPC-250-RGD NB-FOPC-154-RGD 30 M NB-FOPC-149-RGD NB-FOPC-251-RGD NB-FOPC-155-RGD Custom Lengths Available FC - SC Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-254-RGD NB-FOPC-256-RGD NB-FOPC-263-RGD 2 M NB-FOPC-255-RGD NB-FOPC-257-RGD NB-FOPC-264-RGD 3 M NB-FOPC-156-RGD NB-FOPC-258-RGD NB-FOPC-163-RGD 5 M NB-FOPC-157-RGD NB-FOPC-259-RGD NB-FOPC-164-RGD 10 M NB-FOPC-160-RGD NB-FOPC-260-RGD NB-FOPC-165-RGD 20 M NB-FOPC-161-RGD NB-FOPC-261-RGD NB-FOPC-166-RGD 30 M NB-FOPC-162-RGD NB-FOPC-262-RGD NB-FOPC-167-RGD Custom Lengths Available FC - MTRJ Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-265-RGD NB-FOPC-271-RGD NB-FOPC-278-RGD 2 M NB-FOPC-170-RGD NB-FOPC-272-RGD NB-FOPC-168-RGD 3 M NB-FOPC-266-RGD NB-FOPC-273-RGD NB-FOPC-169-RGD 5 M NB-FOPC-267-RGD NB-FOPC-274-RGD NB-FOPC-279-RGD 10 M NB-FOPC-268-RGD NB-FOPC-275-RGD NB-FOPC-280-RGD 20 M NB-FOPC-269-RGD NB-FOPC-276-RGD NB-FOPC-281-RGD 30 M NB-FOPC-270-RGD NB-FOPC-277-RGD NB-FOPC-282-RGD Custom Lengths Available E2000 E2000 Simplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-283-RGD NB-FOPC-290-RGD NB-FOPC-297-RGD 2 M NB-FOPC-284-RGD NB-FOPC-291-RGD NB-FOPC-298-RGD 3 M NB-FOPC-285-RGD NB-FOPC-292-RGD NB-FOPC-299-RGD 5 M NB-FOPC-286-RGD NB-FOPC-293-RGD NB-FOPC-300-RGD 10 M NB-FOPC-287-RGD NB-FOPC-294-RGD NB-FOPC-301-RGD 20 M NB-FOPC-288-RGD NB-FOPC-295-RGD NB-FOPC-302-RGD 30 M NB-FOPC-289-RGD NB-FOPC-296-RGD NB-FOPC-303-RGD Custom Lengths Available FC - ST Duplex Length SM 9um MM 50um MM 62.5um 1 M NB-FOPC-457-RGD NB-FOPC-491-RGD NB-FOPC-461-RGD 2 M NB-FOPC-458-RGD NB-FOPC-492-RGD NB-FOPC-462-RGD 3 M NB-FOPC-459-RGD NB-FOPC-493-RGD NB-FOPC-463-RGD 5 M NB-FOPC-451-RGD NB-FOPC-494-RGD NB-FOPC-464-RGD 10 M NB-FOPC-460-RGD NB-FOPC-495-RGD NB-FOPC-465-RGD 20 M NB-FOPC-424-RGD NB-FOPC-496-RGD NB-FOPC-466-RGD 30 M NB-FOPC-447-RGD NB-FOPC-497-RGD NB-FOPC-467-RGD Custom Lengths Available 65

70 FIBER OPTIC PRODUCTS Fiber Optic Pigtails FIBER OPTIC PIGTAILS Features: Excellent Return Loss Ultra Low Insertion Loss Multimode & Singlemode Jacket: LSZH standard Telcordia GR-326-CORE Compliant IEC Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 PC, UPC & APC Outer Jacket Available in 0.9mm, 1.6mm, 2mm & 3mm Performance Specifications: Single mode Multimode Connector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000 Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB Return Loss Mating durability (500 cycles) -35 to -65dB <0.2dB Back reflection (typical) 55dB 20dB Operating Temperature: - 40 to + 85ºC Part No. NB-FOPG-007 NB-FOPG-022 NB-FOPG-010 NB-FOPG-001 NB-FOPG-004 NB-FOPG-025 NB-FOPG-032 NB-FOPG-013 NB-FOPG-028 NB-FOPG-029 NB-FOPG-030 NB-FOPG-031 Singlemode 9/125 Pigtails Description SC/PC Simplex 0.9mm, LSZH, 1 Meter SC/APC Simplex 0.9mm, LSZH, 1 Meter SC/PC Simplex with 3.0mm jacket, LSZH, 3 Meter ST/PC Simplex 0.9mm, LSZH, 1 Meter ST/PC Simplex with 3.0mm jacket, LSZH, 3 Meter LC/PC Simplex 0.9mm, LSZH, 1 Meter LC/APC Simplex 0.9mm, LSZH, 1 Meter LC/PC Simplex with 2.0mm jacket, LSZH, 3 Meter FC/PC Simplex 0.9mm, LSZH, 1 Meter FC/APC Simplex 0.9mm, LSZH, 1 Meter E2000/PC Simplex with 3.0mm jacket, LSZH, 1 Meter E2000/APC Simplex with 3.0mm jacket, LSZH, 1 Meter Part No. NB-FOPG-009 NB-FOPG-012 NB-FOPG-003 NB-FOPG-006 NB-FOPG-023 NB-FOPG-014 NB-FOPG-026 MultiMode 62.5/125 Pigtails Description SC Simplex 0.9mm, LSZH, 1 Meter SC Simplex with 3.0mm jacket, LSZH, 3 Meter ST Simplex 0.9mm, LSZH, 1 Meter ST Simplex with 3.0mm jacket, LSZH, 3 Meter LC Simplex 0.9mm, LSZH, 1 Meter LC Simplex with 2.0mm jacket, LSZH, 3 Meter FC Simplex 0.9mm, LSZH, 1 Meter Part No. NB-FOPG-008 NB-FOPG-011 NB-FOPG-002 NB-FOPG-005 NB-FOPG-024 NB-FOPG-027 MultiMode 50/125 Pigtails Description SC Simplex 0.9mm, LSZH, 1 Meter SC Simplex with 3.0mm jacket, LSZH, 3 Meter ST Simplex 0.9mm, LSZH, 1 Meter ST Simplex with 3.0mm jacket, LSZH, 3 Meter LC Simplex 0.9mm, LSZH, 1 Meter FC Simplex 0.9mm, LSZH, 1 Meter 66

71 FIBER OPTIC PRODUCTS 10G (OM3) Multi Mode 50/125 Patch cords & Pigtails Applications: Used in multi-gigabit Ethernet environments to patch and connect cabling systems Features: Provide 10-Gig performance (at 850 nm), up to 300 meters Backwords compatible to lower speed applications Compatible with 10Mb/100Mb/1Gb/10Gb transceivers Compliant with TIA/EIA-568-B.3 Core: 50 µm, Cladding: 125 µm, Buffer: 900 µm Jacket: 2.0mm, LSZH, Aqua fiber optic cable Max Attenuation: nm, nm Bandwidth: 1500/ /1310 nm Effective Bandwidth: nm Operating Temperature: - 40 to + 85ºC 10G (OM3) FIBER OPTIC PATCH CORDS & PIGTAILS 10-Gigabit LC-SC Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-343 NB-FOPC-344 NB-FOPC-345 NB-FOPC-346 NB-FOPC-347 NB-FOPC-348 NB-FOPC Gigabit SC-SC Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-350 NB-FOPC-351 NB-FOPC-352 NB-FOPC-353 NB-FOPC-354 NB-FOPC-355 NB-FOPC Gigabit LC-LC Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-357 NB-FOPC-358 NB-FOPC-359 NB-FOPC-360 NB-FOPC-361 NB-FOPC-362 NB-FOPC Gigabit LC-ST Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-364 NB-FOPC-365 NB-FOPC-366 NB-FOPC-367 NB-FOPC-368 NB-FOPC-369 NB-FOPC Gigabit ST-ST Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-371 NB-FOPC-372 NB-FOPC-373 NB-FOPC-374 NB-FOPC-375 NB-FOPC-376 NB-FOPC Gigabit SC-ST Duplex, Multi Mode, 50-Micron 1M 2M 3M 5M 10M 20M 30M NB-FOPC-378 NB-FOPC-379 NB-FOPC-380 NB-FOPC-381 NB-FOPC-382 NB-FOPC-383 NB-FOPC Gigabit Pigtails, Multi Mode, 50-Micron, (0.9mm, LSZH, Aqua color, 1 Mtr) ST SC LC FC NB-FOPG-034 NB-FOPG-035 NB-FOPG-036 NB-FOPG

72 MULTI-FIBER PRE-TERMINATED FIBER OPTIC CABLES Multi-Fiber Distribution & Breakout-Style Cables FIBER OPTIC PRODUCTS Choose Multi-Fiber cables for your network and multi-connection needs Netbox multi-fiber distribution cable assemblies combine the bandwidth capacity of several individual cable assemblies into a single convenient, easy to use and install assembly. Multi-fiber distribution cable assemblies are traditionally used in backbone, premise distribution, and interconnect applications which require multiple fibers to be routed together from point-to-point. Netbox multi-fiber distribution cables are designed to offer a high degree of flexibility through available features and options, allowing each cable to be manufactured to fit the exact application. Multi-fiber distribution cables are available in single mode, multimode, and laser optimized fiber types, multiple jacket/construction types for different applications, fiber count from 4-48 fibers, SC, LC, ST, FC, and MU connector types, and breakout style/length. Comes with cable braid and pulling eye. Distribution-Style Breakout-Style Cable Braid with Pulling Eye Performance Specification: FC, ST, SC, LC, MU SM MM Insertion Loss <0.3dB <0.3dB Return loss >50dB >35dB Mating durability (500 Cycles) <0.2dB <0.2dB Temperature Range( ) -40 ~ +85 NB-MF- A B C D E F G H J K A- Fiber count B- Fiber Type C- Cable Length (Mtr) D- Sheath type E- Fan-out Length F- Sub-Unit Style G- Connector 1 H- End Polish 1 J- Connector 2 K- End Polish 2 XX X XXXX X XX X XX X XX X 04 A= SM 9/125 Example: 0050= 50 Meters V= PVC 05=0.5 meter 1= 0.9mm SC 1= MM PC SC 1= MM PC 06 B= MM 50/125 Z= LSZH 10=1.0 meter 2= 1.6mm ST 2= SM PC ST 2= SM PC 08 C= MM 62.5/125 E= PE 12=1.2 meter 3= 2.0mm FC 3= SM APC FC 3= SM APC 12 D= MM 50/125 (10 Gig) 15=1.5 meter 4= 3.0mm LC LC 24 F= SM 9/125 (10 Gig) 18=1.8 meter 5= Custom MU MU 48 E= Custom 20=2.0 meter 00= Custom 00= Custom 00=Custom Part Number Example: NB-MF-06A0050V101SC2SC2 This represents: Multifiber cable, 6 Single mode 9/125 fiber, 50 Mtrs length, PVC jacket, 1 meter length 0.9mm fan-out, SC/PC to SC/PC 68

73 FIBER OPTIC PRODUCTS 1U, 19 Rack Mount Fiber Optic Panel (Unloaded): Simple SNAP in connector plate Sliding drawer Flexible system for ST or SC, FC, LC, MTRJ Etc Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) 1U (Accepts 3 Adapter Plates) Dimensions: (425mmW*298mmD*45mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. Lock-Style WallMount Fiber Optic Cabinets (Unloaded): Simple SNAP in connector plate Lockable (key) Hinged door Flexible system for ST or SC, FC, LC, MTRJ Etc Supplied with splice cassette & 4 pcs of cable Hanger Cable entry point Color : Black standard Material : Aluminum (1.5mm) 32 to 48-port (Accepts 4 Adapter Panels) P/N: NB-FOPP-001 2U, 19 Rack Mount Fiber Optic Panel (Unloaded): Simple SNAP in connector plate Sliding drawer Flexible system for ST or SC, FC, LC, MTRJ Etc Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) 2U (Accepts 6 Adapter Plates) Dimensions: (425mmW* 298mmD*90mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. Lock-Style WallMount Fiber Optic Cabinets (Unloaded): Simple SNAP in connector plate Lockable (key) Hinged door Flexible system for ST or SC, FC, LC, MTRJ Etc Supplied with splice cassette & 4 pcs of cable Hanger Cable entry point Color : Black standard Material : Aluminum (1.5mm) 48 to 72-port (Accepts 6 Adapter Panels) P/N: NB-FOPP-008 MODULAR FIBER OPTIC PATCH PANELS & CABINETS Usage Environment: Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. P/N: NB-FOPP-006 Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. P/N: NB-FOPP-034 4U, 19 Rack Mount Fiber Optic Cabinet (Unloaded): Adapter Plates: NB-FOPP-037 Simple SNAP in connector plate Material: Aluminum Flexible system for ST or SC, FC, LC, MTRJ Etc Front and back side can have freely access to the cable. Cabinet surface covered with electrostatic powder coating. Adjustable arms with high capacity. Fit in 19 & 23 racks RAL9011 available. Bend radius of optical fiber 40mm. Variety of adaptors available. 4U (Accepts 12 Adapter Panels) Dimensions: (483mmW* 300mmD*177mmH) P/N Description NB-FOAD-037 Adapter Plate, LC-LC, 6 Port Duplex, MM, Black NB-FOAD-038 Adapter Plate, LC-LC, 6 Port Duplex, SM, Black NB-FOAD-023 Adapter Plate, SC-SC, 4 Port Duplex, SM, Black NB-FOAD-039 Adapter Plate, SC-SC, 4 Port Duplex, MM, Black NB-FOAD-036 Adapter Plate, SC-SC, 6 Port Duplex, SM, Black NB-FOAD-050 Adapter Plate, FC-FC Metal, 4 Port Duplex, SM, Black NB-FOAD-051 Adapter Plate, FC-FC Metal, 4 Port Duplex, MM, Black NB-FOAD-052 Adapter Plate, ST-ST Metal, 4 Port Duplex, SM, Black NB-FOAD-053 Adapter Plate, ST-ST Metal, 4 Port Duplex, MM, Black NB-FOAD-030 Adapter Plate, Un- Loaded, 6-ST Simplex Adapter, Black NB-FOAD-031 Adapter Plate, Un- Loaded, 6-FC Simplex Adapter, Black NB-FOAD-032 Adapter Plate, Un- Loaded, 6-SC Simplex Adapter, Black NB-FOAD-054 Adapter Plate, Un- Loaded, 4-SC/ST/FC Duplex Adapter, Black NB-FOAD-060 Adapter Plate, Un- Loaded, 6-SC/ST/FC Duplex Adapter, Black NB-FOAD-055 Adapter Plate, Un- Loaded, 6-LC Duplex Adapter, Black NB-FOAD-027 Blank Plate, Black 69

74 FIBER OPTIC PATCH PANELS FIBER OPTIC PRODUCTS Rack Mount Fiber Panel, 1U, 24 Simplex ST ports: Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) Dimensions: (425mmW*298mmD*46mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. NB-FOPP-065 NB-FOPP-061 P/N Description NB-FOPP-061 Rackmount Fiber Patch Panel, Empty 24 Simplex ST ports, 1U, Black NB-FOPP-064 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex ST Single mode Adapters, 1U, Black NB-FOPP-065 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex ST Multimode Adapters, 1U, Black Rack Mount Fiber Panel, 1U, 24 Simplex SC ports: Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) Dimensions: (425mmW*298mmD*46mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. NB-FOPP-067 NB-FOPP P/N Description NB-FOPP-062 Rackmount Fiber Patch Panel, Empty 24 Simplex SC ports, 1U, Black NB-FOPP-066 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex SC Single mode Adapters, 1U, Black NB-FOPP-067 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex SC Multimode Adapters, 1U, Black

75 FIBER OPTIC PRODUCTS Rack Mount Fiber Panel, 1U, 24 Duplex ports (48 core): Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) SC, ST & FC Dimensions: (425mmW*298mmD*46mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. NB-FOPP-007 FIBER OPTIC PATCH PANELS P/N NB-FOPP-063 NB-FOPP-007 NB-FOPP-035 NB-FOPP-040 NB-FOPP-042 NB-FOPP-041 NB-FOPP-043 NB-FOPP-063 Description 24-Port Duplex (48 core) Fiber patch panel, Rack Mount, Empty, 1U, Black 24-Port Duplex (48 core) SC Fiber patch panel, SM, Rack Mount, Loaded, 1U, Black 24-Port Duplex (48 core) SC Fiber patch panel, MM, Rack Mount, Loaded, 1U, Black 24-Port Duplex (48 core) ST Fiber patch panel, SM, Rack Mount, Loaded, 1U, Black 24-Port Duplex (48 core) ST Fiber patch panel, MM, Rack Mount, Loaded, 1U, Black 24-Port Duplex (48 core) FC Fiber patch panel, SM, Rack Mount, Loaded, 1U, Black 24-Port Duplex (48 core) FC Fiber patch panel, MM, Rack Mount, Loaded, 1U, Black Rack Mount Fiber Panel, 2U, 48 Duplex ports (96 core): Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) SC, ST & FC Dimensions: (425mmW* 298mmD*90mmH) Usage Environment: Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity 85%(+30 C) Atmosphere pressure: 70Kpa~106Kpa. NB-FOPP-009 P/N NB-FOPP-068 NB-FOPP-009 NB-FOPP-036 NB-FOPP-048 NB-FOPP-050 NB-FOPP-049 NB-FOPP-051 NB-FOPP-068 Description 48-Port Duplex (96 core) Fiber patch panel, Rack Mount, Empty, 2U, Black 48-Port Duplex (96 core) SC Fiber patch panel, SM, Rack Mount, Loaded, 2U, Black 48-Port Duplex (96 core) SC Fiber patch panel, MM, Rack Mount, Loaded, 2U, Black 48-Port Duplex (96 core) ST Fiber patch panel, SM, Rack Mount, Loaded, 2U, Black 48-Port Duplex (96 core) ST Fiber patch panel, MM, Rack Mount, Loaded, 2U, Black 48-Port Duplex (96 core) FC Fiber patch panel, SM, Rack Mount, Loaded, 2U, Black 48-Port Duplex (96 core) FC Fiber patch panel, MM, Rack Mount, Loaded, 2U, Black 71

76 FIBER OPTIC PRODUCTS FIBER OPTIC ODF & ORGANIZER Fiber Optic ODF & Organizer Features: Material: SPCC, Thickness: 1.2mm Cabinet surface covered with electrostatic powder coating, the power thickness is 0.1mm Bend radius optical fiber 40mm Usage Environment Operating temperature: -5 C~+40 C Storage temperature: -25 C~+55 C Humidity: 85% (+30 C) Atmosphere Pressure: 70Kpa~106Kpa Application Telecommunication networks CATV networks Fiber to the home Co-Location/Customer Premise LAN/WAN Photo-electricity Specifications Insertion Loss 0.5 db Return Loss: PC 40 db, UPC 50 db, APC 60 db Durability >1000 times Insulating Resistance 1000MΩ/500V Compressive Resistance >3000V (DC) 1min without breakdown and flashover Exterior Structure ODF (Loaded with 24 FC/SM Adapters), Size (483*248*44mm), P/N: NB-FOPP-059 Organizer, Size (483*230*44mm), P/N: NB-FOPP

77 Fiber Optic Connectors FIBER OPTIC PRODUCTS STANDARDS All components of/and the final product are designed and tested to conform the requirements of IEC , CECC , Bellcore/Telcordia GR- 326, EIA/TIA 604-3A, EIA/TIA 568, ISO/IEC nd Ed., EN 50173, JIS C5973 F04, ICEA-596, IEC A1a, ITU-T G.651 or IEC A1b or ITU-T G.652 (depending on fiber), Belcore/Telcordia GR-409-CORE, IEC 793, IEC E1, IEC E3, UL1666/901 (UL-cable) and EIA/TIA455. SC, MM SC/PC, SM MTRJ SC/APC ST LC, MM LC/PC, SM FC FC/APC E2000/APC E2000/PC FIBER OPTIC CONNECTORS & ATTENUATORS Epoxy Type Field Assembling Connector P/N Connector P/N Connector P/N Description NB-FOCO-003 SC/PC Multi mode NB-FOCO-016 FC/APC Single mode NB-FOCO-020 SC Fiber Field Assembling connector, 3mm, Multi Mode NB-FOCO-004 SC/PC Single mode NB-FOCO-011 LC/PC Multi mode NB-FOCO-021 SC Fiber Field Assembling connector, 0.9mm, Multi Mode NB-FOCO-015 SC/APC Single mode NB-FOCO-012 LC/PC Single mode NB-FOCO-022 SC Fiber Field Assembling connector, 3mm, Single Mode NB-FOCO-007 ST/PC Multi mode NB-FOCO-013 MTRJ Multi mode NB-FOCO-023 SC Fiber Field Assembling connector, 0.9mm, Single Mode NB-FOCO-008 ST/PC Single mode NB-FOCO-014 MTRJ Single mode NB-FOCO-009 FC/PC Multi mode NB-FOCO-018 E2000/PC Single mode NB-FOCO-010 FC/PC Single mode NB-FOCO-019 E2000/APC Single mode Fiber Optic In-Line Attenuators Application: Telecommunication Networks Data Networks Video & CATV Features: Bellcore Compliant Durability (well over 100mw) Wavelength Independent (DWDM) Simple and reliable Structure Specifications: Operating Wavelength SM: 1310/1550nm Return Loss UPC: < 55dB APC: < 65dB Attenuation Accuracy ±0.5 (1-10dB) ±1.0 (11-30dB) Polarization Dependent Loss <0.2dB Maximum Optical Input Power 200mW Operating Temperature Range -40 ~ +80 ºC NB-FOAT- Connector Application Attenuation db XX X XX SC U= UPC 01 FC A= APC 02 ST 05 LC 10 MU P/N Example: NB-FOAT-SCA05 This represents: SC/APC 5dB Attenuator 25 73

78 FIBER OPTIC PRODUCTS Fiber Optic Adapters FIBER OPTIC ADAPTERS Product Description: Mating sleeve fiber optic adaptors allows users to couple from one connector type to another same type. These adaptors are comprised of a polymer / metal outer body and their inner assembly fitted with a precision alignment mechanism. These adaptors are precisely made and manufactured to demanded specification. The combination of a ceramic / phosphor bronze alignment sleeves and precision molded polymer housing provides consistent long-term mechanical and optical performance. Complies with JIS various connectors Application: Fiber optic transmission system CATV network LAN Testing/Measurement Instruments Fiber distribution frame, fiber optic wall mount and rack mount cabinets. Compliance: Excellent changeability and directivity 100% optic test (insertion loss) Ceramic and phosphor bronze sleeve tube optional Accurate external size Complies with JIS various connectors Specification Polish Type PC APC Insertion Loss (db) Mating Durability (500 Cycles) (db) 0.20 Temperatures Stability (db) 0.30 Operating Temperature (ºC) -40 ~ +80 Storage Temperature (ºC) -40 ~ +85 Withdrawal Force (g/f) P/N Description P/N Description NB-FOAD-009 ST-ST Adapter, Simplex, Metal, MM NB-FOAD-046 SC-SC Adapter, Simplex, Plastic, SM/APC NB-FOAD-010 ST-ST Adapter, Simplex, Metal, SM NB-FOAD-016 SC-SC Adapter, Duplex, Plastic, MM NB-FOAD-040 ST-ST Adapter, Duplex, Metal, MM NB-FOAD-017 SC-SC Adapter, Duplex, Plastic, SM/PC NB-FOAD-033 ST-ST Adapter, Duplex, Metal, SM NB-FOAD-047 SC-SC Adapter, Duplex, Plastic, SM/APC NB-FOAD-011 ST-ST Adapter, Duplex, Plastic, MM NB-FOAD-028 LC-LC Adapter, Duplex, Plastic, MM NB-FOAD-012 FC-FC Adapter, Simplex, Metal, MM NB-FOAD-042 LC-LC Adapter, Duplex, Plastic, SM/PC NB-FOAD-013 FC-FC Adapter, Simplex, Metal, SM/PC NB-FOAD-048 LC-LC Adapter, Duplex, Plastic, SM/APC NB-FOAD-044 FC-FC Adapter, Simplex, Metal, SM/APC NB-FOAD-018 SC-ST Adapter, Simplex, Plastic, MM NB-FOAD-029 FC-FC Adapter, Duplex, Metal, MM NB-FOAD-019 SC-ST Adapter, Simplex, Plastic, SM NB-FOAD-041 FC-FC Adapter, Duplex, Metal, SM/PC NB-FOAD-020 SC-ST Adapter, Duplex, Plastic, MM NB-FOAD-045 FC-FC Adapter, Duplex, Metal, SM/APC NB-FOAD-021 SC-ST Adapter, Duplex, Plastic, SM NB-FOAD-014 SC-SC Adapter, Simplex, Plastic, MM NB-FOAD-043 E2000-E2000 Adapter, Simplex, Plastic, SM/PC NB-FOAD-015 SC-SC Adapter, Simplex, Plastic, SM/PC NB-FOAD-049 E2000-E2000 Adapter, Simplex, Plastic, SM/APC Bare Fiber Adapters Characteristics: Various receptacle type High stability Easy to operate Repeated use NB-FOAD-057 Parameters: Ferrule ID: ф0.1255/ ф Insertion Loss: 1.0dB Repeatability: 0.2dB Life time: 1000 NB-FOAD

79 FIBER OPTIC PRODUCTS Fiber Optic Splice Cassettes Material: Flame-Resisting (UL94V0) PA Color: White & Black Dimension: 155x92x10mm 12 Core, P/N: NB-FOPG Core, P/N: NB-FOPG-020 Fiber Optic Splice Protection Sleeve Features: Single holed (preshrunk) and eliminates fiber threading. Smooth, de-burred stainless steel reinforcing member ends decrease and risk of fiber damage during installation. Extended liner length prevents contact between the fiber and the backbone. Clear sleeve design per sign easy centering of splice before heating. Sealing structure makes the splice free from the effect of temperature and humidity from environment Core, P/N: NB-FOPG-039 FIBER OPTIC SPLICING ACCESSORIES Application: A specially designed cross linked polyolefin tubing system, with meltable liner, providing strength and protection to optical fiber splices. Usage Environment: Operating temperature: -55 C~+60 C Shrinking Temperature range: 90 C~+110 C Outer tube (heat-shrinkable) Strength member Inner tube (hot-melt glue) P/N (100-pack) Sleeve length Strength member length Diameter after shrink Fiber count Recommended cleave length Coating diameter NB-FOPG mm 51mm 3.1mm Single 16mm 0.25mm to 0.9mm Fiber Optic Termination Box NB-FOCL-A NB-FOCL-D NB-FOCL-B P/N Description No. of ports Max. Capacity (core) NB-FOCL-D Termination Box, Plastic 2 24 NB-FOCL-B Termination Box, Metal 2 48 NB-FOCL-A Termination Box, Metal 2 24 NB-FOCL-C Termination Box, Metal

80 OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) NB-FOCL-001 Application: Features: Suitable for aerial and wall-mounting Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inoovative structure design and easy for operation Ambient temperature ranges from -40 to +60ºC Dimension and capacity: Outside dimension (LxWxH): 280x200x90 (mm) Weight (excluding outside box): 1200g 1500g Number of inlet/outlet ports: 2 Diameter of fiber cable: Φ8 Φ14 (mm) Core capacity of FOSC: 48 (max) Number of splice tray: 4 Core capacity per tray: 12 core Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube FIBER OPTIC PRODUCTS P/N Size (mm) L x W x H Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL x200x Φ NB-FOCL-002 Application: Suitable for aerial, wall-mounting, pipeline & underground Features: Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Dimension and capacity: Outside dimension (LxWxH): 385x248x120 (mm) Weight (excluding outside box): 3200g 3600g Number of inlet/outlet ports: 6 Diameter of fiber cable: Φ8 Φ23 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 8 Core capacity per tray: 12 core Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube P/N Size (mm) L x W x H Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL x248x Φ

81 FIBER OPTIC PRODUCTS NB-FOCL-003 & NB-FOCL-004 Application: Features: Suitable for aerial, underground, wall-mounting, duct-mounting and handhole-mounting Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inoovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Dimension and capacity: Outside dimension (LxWxH): 396x190x126 (mm) Weight (excluding outside box): 2500g 2825g Number of inlet/outlet ports: 6 Diameter of fiber cable: Φ8 Φ20 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 12 & 24 core Main accessories and special tools: OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube P/N Size (mm) L x W x H Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL x190x Φ NB-FOCL x190x Φ

82 OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) NB-FOCL-005 Application: Features: Directly buried and special environment underground Material suitable for underground Inovative structure design and easy for operation Anti-chemical cauterization Anti-hydrolysis Specialty Anti-termite Specialty Ambient temperature ranges from -40 to +65ºC Dimension and capacity: Outside dimension (LxWxH): 468x210x116 (mm) Weight (excluding outside box): 2650g 3000g Number of inlet/outlet ports: 4 Diameter of fiber cable: Φ7 Φ21 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 24 core Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube FIBER OPTIC PRODUCTS P/N Size (mm) L x W x H Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL x210x Φ NB-FOCL-006 Application: Hoop (left) Hoop (right) Suitable for aerial, wall-mounting, duct-mounting and underground Hoop connector Features: FOST Hoop fixing bolt Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Fixing slot of heat shrinkable protective sleeve Grommet Fiber holding tray Hoop locking system Label Dimension and capacity: Outside dimension (HxD): 435xΦ190 (mm) Weight (excluding outside box): 2350g 2600g Number of inlet/outlet ports: 5 Diameter of fiber cable: Φ8 Φ25 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 24 core Fixing shelf for FOST FOST FOST cover 90 ã FOSC cover Base Main accessories and special tools: Grommet Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (7 meters) Pressure testing valve Heat shrinkable fixing sleeves Seal fitting Entry/exit tube Fixing device for reinforced core Entry/exit tube P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL xΦ Φ

83 NB-FOCL-007 Application: Features: FIBER OPTIC PRODUCTS Suitable for aerial, wall-mounting, duct-mounting and underground Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Dimension and capacity: Outside dimension (HxD): 288xΦ178 (mm) Weight (excluding outside box): 1550g 1740g Number of inlet/outlet ports: 4 Diameter of fiber cable: Φ8 Φ20 (mm) Core capacity of FOSC: 48 (max) Number of splice tray: 4 Core capacity per tray: 12 core Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (2 meters) Pressure testing valve Heat shrinkable fixing sleeves FOST Fixing slot of heat shrinkable protective sleeve Fixing shelf for FOST Grommet 90 ã FOST Seal fitting Entry/exit tube(single) Hoop (left) Hoop fixing bolt Hoop (right) Grommet Fiber holding tray Base Hoop connector Fixing device for reinforced core Hoop locking system FOSC cover Entry/exit tube(mass) OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL xΦ Φ NB-FOCL-008 Application: H o o p(left) Hoop(right) Suitable for aerial, wall-mounting, duct-mounting and underground Features: Hoop connector Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Grommet Hoop fixing bolt Hoop locking system FOSC Dimension and capacity: Outside dimension (HxD): 510xΦ250 (mm) Weight (excluding outside box): 3860g 5270g Number of inlet/outlet ports: 8-19 Diameter of fiber cable: Φ8 Φ43 (mm) Core capacity of FOSC: 288 (max) Number of splice tray: 12 Core capacity per tray: 24 core Fixing slot of heat shrinkable protective sleeve FOST 90 ã Fiber holding tray Fixing shelf for FOST Base FOSC cover Logo Label Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (12 meters) Pressure testing valve Heat shrinkable fixing sleeves Grommet FOST cover Seal fitting Entry/exit tube(single) Fixing device for reinforced core Entry /exit tube(mass) D i 1 Fiber Optic Splice Closure P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL xΦ Φ

84 OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) NB-FOCL-009 Application: Features: Suitable for wall-mounting, duct-mounting and underground Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC FOST Cover Dimension and capacity: Outside dimension (HxD): 490xΦ220 (mm) Weight (excluding outside box): 2950g 4250g Number of inlet/outlet ports: 8-10 Diameter of fiber cable: Φ8 Φ36 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 24 core 24 port distribution panel Main accessories and special tools: Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (4 meters) Pressure testing valve Heat shrinkable fixing sleeves Base Clasp Bolt Nut Cl asp Fixing Shelf for FOST FIBER OPTIC PRODUCTS Grommet FOST Distribution Unit Adapter Earthing Deriving Device Fixing Device for Reinforce Core Seal Fiting Bracket FOSC cover Transom (metal) Hoop (metal) Base Inlet/outlet tube (mass) Fiber cable FOSC hoop (right) FOSC hoop (left) Hoop locking system Hoop fixing bolt Inlet/outlet tube (single) Heat shrinkable fixing sleeve (single) Inlet/outlet tube (single) Fiber cable P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL xΦ Φ NB-FOCL-010 Application: Hoop(left) Hoop(right) Features: Suitable for aerial, wall-mounting, duct-mounting and underground Hoop fixing bolt Hoop connector Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC Dimension and capacity: FOSC Fixing slot of heat shrinkable protective sleeve Fiber holding tray Hoop locking system Label Outside dimension (HxD): 500xΦ228 (mm) Weight (excluding outside box): 3100g 3930g Number of inlet/outlet ports: 5-14 Diameter of fiber cable: Φ8 Φ42 (mm) Core capacity of FOSC: 144 (max) Number of splice tray: 5 Core capacity per tray: 32 core Main accessories and special tools: Fixing shelf for FOST FOSC 90 ã Grommet FOSC cover Fixing device for reinforced core Base Bracket Fiber Optic Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (7 meters) Pressure testing valve Heat shrinkable fixing sleeves Seal fitting Entry/exit tube Drawing 1 Splice Closure P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray NB-FOCL xΦ Φ8 Φ

85 End to End Telecom, Enterprise & Data Center Cabling Solutions CABINETS & RACKS WALL MOUNT CABINETS (SINGLE SECTION) 82 WALL MOUNT CABINETS (DOUBLE SECTION) 83 LOW-PROFILE WALL MOUNT CABINETS (DOUBLE SECTION) 84 2 POST & 4 POST OPEN RACKS 85 SERVER RACKS ECONOMY SERVER RACKS FLOOR STANDING NETWORKING CABINETS 92 CABINETS ACCESSORIES & CABLE MANAGEMENTS sales@netboxwll.com - 81

86 CABINETS & RACKS WALL MOUNT CABINETS (SINGLE SECTION) Feature: Wall Mount Cabinets (Single Section) Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19 standard installation Removable side panels, side locks optional Cable entry on both of top cover and bottom panel Turning angle of front door is over 180 degrees Loading Capacity: 60 Kgs Degree of Protection: IP20 120mm fan optional Standard : Comply with ANSI/EIA, RS-310-D, DIN41497 part 1, EC297-2, DIN41494 part 7, GB/T standard Material: SPCC cold Rolled Steel Thickness : Mounting profile : 1.5mm, others : 1.2mm Surface Finish: Degreasing, pickling, phosphoric, powder coated 1- Frame 2- Side panel 3- Mounting panel 4- Cable entry cover 5- Mounting profile 6- Front door options 7- Lock Single Section P/N Capacity(U) Color Height(mm) Width(mm) Depth(mm) NB-CAB-001 Black (RAL9004) 6 NB-CAB-002 Gray (RAL7035) 368 NB-CAB-003 Black (RAL9004) 9 NB-CAB-004 Gray (RAL7035) 501 NB-CAB-005 Black (RAL9004) 12 NB-CAB-006 Gray (RAL7035) NB-CAB-007 Black (RAL9004) 15 NB-CAB-008 Gray (RAL7035) 769 NB-CAB-009 Black (RAL9004) 18 NB-CAB-010 Gray (RAL7035) 901 NB-CAB Black (RAL9004) 368 NB-CAB Black (RAL9004) 501 NB-CAB Black (RAL9004) NB-CAB Black (RAL9004) 769 NB-CAB Black (RAL9004)

87 CABINETS & RACKS Feature: Wall Mount Cabinets (Double Section) Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19 standard installation Removable side panels, side locks optional Cable entry on both of top cover and bottom panel Turning angle of front door is over 180 degrees Loading Capacity: 60 Kgs Degree of Protection: IP20 Easy operation and maintaining at the back 120mm fan optional Turning angle of rear door is above 90 degrees Standard : Comply with ANSI/EIA, RS-310-D, DIN41497 part 1, EC297-2, DIN41494 part 7, GB/T standard Material: SPCC cold Rolled Steel Thickness : Mounting profile : 1.5mm, others : 1.2mm WALL MOUNT CABINETS (DOUBLE SECTION) Surface Finish: Degreasing, pickling, phosphoric, powder coated 1. Cable entry cover 2. Back panel 3. Frame 4. Side panel 5. Mounting profile 6. Lock 7. Front door options Double Section P/N Capacity(U) Color Height(mm) Width(mm) Depth(mm) NB-CAB-095 NB-CAB-012 NB-CAB-096 NB-CAB Black (RAL9004) Gray (RAL7035) Black (RAL9004) Gray (RAL7035) NB-CAB Black (RAL9004) 368 NB-CAB Black (RAL9004) 501 NB-CAB Black (RAL9004) NB-CAB Black (RAL9004) 769 NB-CAB Black (RAL9004)

88 CABINETS & RACKS LOW-PROFILE WALL MOUNT CABINETS (DOUBLE SECTION) Low-Profile Wallmount Cabinet (Double Section) Features: Max. Capacity : 13U Static loading capacity : 50 Kgs. Two Height available: ( 501mm & 769mm) External dimension of cabinet: 600mm (width)*270mm(depth) Toughened glass front door, could observe devices operation Cable entries are available at top cover, good ventilation (cooling fans are optional) 2 pieces of mounting profiles are available. From the bottom up, install 2U mounting horizontally from the 1 st U; install 4U mounting profiles horizontally from the 6 th U. The installation position for 4U mounting profiles could be adjusted from the 6 th U to the 9 th U. Cable entries at the back of wall mounted enclosure are available. Metal cable management rings are installed at the back for cable management. Easy operation and maintaining at the back of enclosure. P/N Color W*D*H (mm) Max. capacity NB-CAB-070 Black (RAL9004) 600*270*769 13U NB-CAB-071 Gray (RAL7035) 600*270*769 13U NB-CAB-072 Black (RAL9004) 600*270*501 8U NB-CAB-073 Gray (RAL7035) 600*270*501 8U 84

89 CABINETS & RACKS Open Racks Features: Standard: comply with ANSI/EIA; RS-310-D, IEC297-2, DIN41491, PART1, DIN41494 PART7, GB/T standard. Modular design, easily assemble and disassemble for delivery, low-cost. Various optional accessories according to requirements (cable management slot, cable management, removable working panel, etc.) 19 frame 2mm welded fold steel sheet, two side figure punching. COLOR: Black (RAL9004) 2 POST & 4 POST OPEN RACKS 1-Pole 2- Plinth 3- Horizontal beam 4- Heavy duty castor Capacity Color P/N Two post 42U Black (RAL9004) NB-CAB-078 Four post 42U Black (RAL9004) NB-CAB

90 CABINETS & RACKS Floor Standing Server Racks SERVER RACKS FEATURES Architecture Equipment from wide range of manufacturers easily installs into the rack. Fully adjustable vertical and horizontal mounting rails, ensures maximum compatibility. Three basic foot prints and 5 heights enable you to select the rack which fits your environment. Standard configurations Server Rack 61000: Extra deep server rack 600 mm wide by 1000 mm deep Server Rack 8800: Space saver at 800 mm wide by 800 mm deep Server Rack 81000: The classic 800 mm wide by 1000 mm deep STRUCTURAL INTEGRITY Designed to support loads up to 1,000 kgs. static. Thermal Management Depending on site location and equipment installed, various cooling techniques may be employed. The rack can be configured to accomodate a variety of methods. Front to Rear : Cyberack equipped with vented roof plus perforated front and rear doors, allows rack mounted equipment to pull air from the front and exhaust it through rear of rack. Bottom to Top (Chimney) : Selection of non or lightly vented doors, non vented roof and addition of fan trays will allow user to achieve this cooling effect. Forced Air : Addition of gasketing combined with non vented doors and roof, plus installation of "push" and "pull" fan trays, will create positive pressure inside the closed rack. Provides enhanced cooling as well as reducing external contaminants entering rack. Flexibility/Expandability Basic rack does not include doors, allowing user to select per needs. All doors are left right reversible by user on location. The rack can be bayed together at time of installation, or sometime in future, providing user with expansion capability to match their needs. Compliance Conforms to EIA-310-D, IEC standards. It is a type A cabinet. Security All doors and side panels are equipped with locks. Side panels also come with quick release slide latches for easy removal in lower security or maintenance environments. Security panels for bayed racks are also available. Quality Premium grade cold rolled steel coated with a iron-phosphate rust prevention layer and finished with tough scratch resistant powder polyester paint, forms the basis of our products. All design and manufacturing carried out under the rigorous ISO 9001 quality assurance system. 86

91 CABINETS & RACKS Server Rack FEATURES Depth of 1000 mm Enhanced thermal management capabilities Improved cable management support Easily expandable on site Field reversible lockable doors Support loads up to 1,000 kg Caster rated 250 kg/wheel SERVER RACKS Heights: 27U, 39U, 42U and 45U Standard: Conforms to EIA-310-D Type A, IEC Material: High grade cold rolled steel Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint Color: Standard Low Gloss Black SPECIFICATION SHEET MODEL Application: The Server rack concentrates on fulfilling the needs created by new generation rack mount servers and other devices. The additional depth, 1000 mm standard, will house most of today's deep servers. Thermal management is another crucial feature in today's rack mount environment, and Server rack can be fitted with a range of door and roof options to satisfy your particular configuration. Internal Useable Height (mm): UNIT REF. A B 27U 1375mm 1209mm 42U 2042mm 1870mm 600W C D E 600mm 465mm 450mm UNIT REF. F G H I 1000D 1069mm 1000mm 866mm 731mm NB-CAB-074 NB-CAB U Server rack, 600mm x 1000mm, with metal curved front door, Black color 42U Server rack, 600mm x 1000mm, with metal curved front door, Black color 87

92 CABINETS & RACKS Server & Network Rack 8800 SERVER RACKS FEATURES Open architecture supports wide range of equipment Flexibility for mixed equipment installations Lockable doors and panels for system integrity Numerous options and accessories to suit your specific configuration Easily expandable for future growth Supports load up to 1,000 kg Castor rated to 250 kg/wheel Heights: 27U, 39U, 42U and 45U Standard: Conforms to EIA-310-D Type A, IEC Material: High grade cold rolled steel Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint Color: Standard Low Gloss Black SPECIFICATION SHEET MODEL 8800 Application : The Server rack 8800 is designed for networking equipment and cabling installations. The wide frame and cable management features allow for the configuration of a range of equipment including routers, hubs, bridges as well as other rack mounted or free standing devices. This versatility makes the 8800 an excellent solution to mixed installation environments. Internal Useable Height (mm): UNIT REF. A B 42U 2042mm 1870mm 800W C D E 800mm 465mm 450mm UNIT REF. F G H I 800D 869mm 800mm 666mm 581mm NB-CAB-082 NB-CAB U Server rack, 800mm x 800mm, with front glass door, Black color 42U Server rack, 800 mm x 800mm, with metal curved front door, Black color 88

93 CABINETS & RACKS Server & Network Rack FEATURES Ideal for mixed equipment installations Array of doors to achieve proper thermal management Economized space usage by accepting both rack mounted and free standing equipment Secure environment Extensive work space for cable management Supports load up to 1,000 kg Castor rated to 250 kg/wheel SERVER RACKS Heights: 27U, 39U, 42U and 45U Standard: Conforms to EIA-310-D Type A, IEC Material: High grade cold rolled steel Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint Color: Standard Low Gloss Black SPECIFICATION SHEET MODEL Application: The Server rack was engineered to meet the demands of both high-density server installation plus network management requirements. The overall depth of 1000 mm will accept the deepest rack mounted servers on the market. Additional depth can be added on request. A wide selection of doors and other accessories rounds out the solutions offered by Server rack Internal Useable Height (mm): UNIT REF. A B 42U 2042mm 1870mm 800W C D E 800mm 465mm 450mm UNIT REF. F G H I 1000D 1069mm 1000mm 866mm 731mm NB-CAB-086 NB-CAB U Server rack, 800mm x 1000mm, with front glass door, Black color 42U Server rack, 800 mm x 1000mm, with metal curved front door, Black color 89

94 CABINETS & RACKS ECONOMY SERVER RACKS Economy Floor Standing Server Racks with Front Metal Door Feature: Comply with ANSI/EIA;RS-310-D; DIN41491; PART1; IEC297-2; DIN41494; PART7; GB/T standard, compatible 19 international standard, metric system standard and ETSI standard; Optional cable entry on top cover and bottom panel, removable front & rear door and side panel facility, ventilation and rat-proof on the bottom. Reliable structure, static loading capacity: 800KG Adjustable feet and castors are available, moving conveniently, and fixing reliable Hexagonal reticular high-density vented front door, Double section high-density vented rear door. Varies optional accessories, reliable quality. Excellent ventilation and heat dispersing. Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel Thickness: mounting profile 2.0mm, others: mm Degree of Protection: IP20 Color: RAL9004 (Black) ; RAL7035 (Gray) Spring lock, High density vented door Fan unit Adjustable mounting profile & mounting angle U mark mounting rail Lockable cable entry Front Metal Curved Vented door Earthing Double-section highdensity vented rear door 800mm Width cabinet comes with 2 metal cable management slot with cap Part Number Description Color Width Depth High NB-CAB U Cabinet Black (RAL9004) 600mm 1000mm 1388mm NB-CAB U Cabinet Black (RAL9004) 600mm 1000mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 800mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 1000mm 2055mm 90

95 CABINETS & RACKS Economy Floor Standing Server Racks with Front Glass Door Feature: Comply with ANSI/EIA;RS-310-D; DIN41491; PART1; IEC297-2; DIN41494; PART7; GB/T standard, compatible 19 international standard, metric system standard and ETSI standard; Optional cable entry on top cover and bottom panel, removable front & rear door and side panel facility, ventilation and rat-proof on the bottom. Reliable structure, static loading capacity: 800KG Adjustable feet and castors are available, moving conveniently, and fixing reliable Tempered glass front door with vented border, Double section high-density vented rear door. Varies optional accessories, reliable quality. Excellent ventilation and heat dispersing. Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel Thickness: mounting profile 2.0mm, others: mm Degree of Protection: IP20 Color: RAL9004 (Black) ; RAL7035 (Gray) ECONOMY SERVER RACKS Vented border Fan unit Adjustable mounting profile & mounting angle U mark mounting rail Lockable cable entry Earthing Tempered glass front door with vented border Double-section highdensity vented rear door 800mm Width cabinet comes with 2 metal cable management slot with cap Part Number Description Color Width Depth High NB-CAB U Cabinet Black (RAL9004) 600mm 1000mm 1388mm NB-CAB U Cabinet Black (RAL9004) 600mm 1000mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 800mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 1000mm 2055mm 91

96 CABINETS & RACKS FLOOR STANDING NETWORKING CABINETS Floor Standing Networking Cabinets Feature: Comply with ANSI/EIA;RS-310-D; DIN41491; PART1; IEC297-2; DIN41494; PART7; GB/T standard, compatible 19 international standard, metric system standard and ETSI standard; Optional cable entry on top cover and bottom panel, removable front & rear door and side panel facility, ventilation and rat-proof on the bottom. Reliable structure, static loading capacity: 500KG Adjustable feet and castors are available, moving conveniently, and fixing reliable International popular tempered glass front door, steel rear door. Varies optional accessories, reliable quality. Good ventilation and heat dispersing. Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel, Thickness: mounting profile 2.0mm, others: mm Degree of Protection: IP20 Removable front Color: RAL9004 (Black) ; RAL7035 (Gray) door U mark mounting rail Adjustable mounting profile & mounting angle Earthing Fan unit Back door view Lockable cable entry Front door view 800mm Width cabinet comes with 2 metal cable management slot with cap Part Number Description Color Width Depth High NB-CAB U Cabinet Black (RAL9004) 600mm 800mm 1166mm NB-CAB U Cabinet Gray (RAL7035) 600mm 800mm 1166mm NB-CAB U Cabinet Black (RAL9004) 600mm 800mm 1388mm NB-CAB U Cabinet Gray (RAL7035) 600mm 800mm 1388mm NB-CAB U Cabinet Black (RAL9004) 600mm 600mm 2055mm NB-CAB U Cabinet Gray (RAL7035) 600mm 600mm 2055mm NB-CAB U Cabinet Black (RAL9004) 600mm 800mm 2055mm NB-CAB U Cabinet Gray (RAL7035) 600mm 800mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 800mm 2055mm NB-CAB U Cabinet Black (RAL9004) 800mm 1000mm 2055mm 92

97 Heavy-Duty Fixed Shelves Rated load: 100 kg SPCC cold rolled steel, T: 1.2mm Black (RAL9004) CABINETS & RACKS P/N Color Depth (mm) NB-CAB-085 Black 550 (for 800-depth cabinet) NB-CAB-099 Black 710 (for 1000-depth cabinet) Cantilever Shelves Rated load: 25 kg 19 installation 2U high SPCC cold rolled steel, Thickness: 1.5mm Heavy-Duty 19 Rackmount Fixed Shelves with mounting ear Rated load: 100 kg SPCC cold rolled steel, T: 1.2mm Black (RAL9004) P/N Color Depth (mm) NB-CAB-100 Black 550 (for 800-depth cabinet) NB-CAB-101 Black 710 (for 1000-depth cabinet) Keyboard Tray 19 Rack Mount High grade cold rolled steel Adjustable cable arm Sloped front edge Black (RAL9004) CABINETS ACCESSORIES & CABLE MANAGEMENTS P/N Color Depth (mm) NB-CAB-057 Black (RAL9004) 350 NB-CAB-058 Gray (RAL7035) 350 P/N NB-CAB-081 Description Telescopic keyboard tray kit Sliding Vented Server Shelves Server Cabinet Fan Trays Rated load: 50 kg High grade cold rolled steel High quality bearing slide mechanism 220 VAC 50/60 Hz, 11/10 W 3 Fans/Tray P/N Color Depth (mm) NB-CAB-050 Black 550 NB-CAB-051 White 550 NB-CAB-052 Black 700 NB-CAB-080 White 700 P/N NB-CAB-055 NB-CAB-056 Description Roof mout fan tray, 3 fan, Black Roof mout fan tray, 3 fan, Gray Heavy-Duty Vented Fixed Server Shelves Rated load: 100 kg High grade cold rolled steel Full Width Fixed & Sliding Shelves Rated load: kg High grade cold rolled steel Black (RAL9004) P/N Color Depth (mm) NB-CAB-045 Black 450 NB-CAB-046 White 450 NB-CAB-047 Black 550 NB-CAB-048 White 550 NB-CAB-049 Black 700 NB-CAB-079 White 700 P/N NB-CAB-053 NB-CAB-054 Description Full width fixed server shelf 700mm Deep Full width sliding server shelf 700mm Deep 93

98 CABINETS & RACKS CABINETS ACCESSORIES & CABLE MANAGEMENTS Blanking Panels 19 Rack Mount 1U, 2U & 4U SPCC cold rolled steel, 1.2mm Powder coated Black (RAL9004) P/N Description NB-CAB-091 1U Blanking panel NB-CAB-092 2U Blanking panel NB-CAB-093 4U Blanking panel 1U Cable Manager, Metal D-Ring 19 Rack Mount 5 rings Carbon steel (1.5mm panel, 2.0mm Metal Buckle) Powder coated Black (RAL9004) Cooling Fan Dimension: 120mm*120mm*38mm Mounting dimension: 105mm*105mm Air flowing: CBM/H Black (RAL9004) P/N Description NB-ACC-012 Single fan 220VAC Cage Nut Set Screw: M6*16 Nut: M6 Washer: Φ6 Plated nickle surface finish P/N NB-ACC-008 Description 1U cable manager, with metal D-rings P/N NB-ACC-013 Description Cage nuts & screws, (50-pack) 1U Cable Manager, Metal With Cover 2U Cable Manager, Metal D-Ring 19 Rack Mount Carbon steel 1.0mm Powder coated Black (RAL9004) 19 Rack Mount 5 rings Carbon steel (1.5mm panel, 2.0mm Metal Buckle) Powder coated Black (RAL9004) P/N NB-ACC-040 Description 1U metal cable manager with cover P/N NB-ACC-010 Description 2U cable manager, with metal D-rings 1U Cable Manager, Plastic With Cover 2U Cable Manager, Plastic With Cover 19 Rack Mount High-strength, flame-retardant thermoplastic Carbon steel Base 1.0mm Powder coated Black (RAL9004) 19 Rack Mount High-strength, flame-retardant thermoplastic Carbon steel Base 1.0mm Powder coated Black (RAL9004) P/N NB-ACC-009 Description 1U plastic cable manager, with cover P/N NB-ACC-011 Description 2U plastic cable manager, with cover 94

99 End to End Telecom, Enterprise & Data Center Cabling Solutions POWER DISTRIBUTION POWER DISTRIBUTION UNITS

100 POWER DISTRIBUTION POWER DISTRIBUTION UNITS 6 Outlets BS1363 PDU P/N: NB-ACC-043 Socket Type BS1363 (90 degree) Outlet Module (6) RoHS Yes Bracket Install 19 Frontal installation Cable with plug BS A plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = x 44.4 x 62 mm Mounting Length 465 mm Case Length 432 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 6 Outlets BS1363 PDU P/N: NB-ACC-058 Socket Type BS1363 (90 degree) Outlet Module (6) RoHS Yes Bracket Install 19 Frontal installation Cable with plug BS A plug Control Function 16A Lighted master switch Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 487 x 44.4 x 62 mm Mounting Length 459 mm Case Length 431 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 8 Outlets BS1363 PDU P/N: NB-ACC-002 Socket Type BS1363 (45 degree) Outlet Module (8) RoHS Yes Bracket Install Inverse installation Cable with plug BS A plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 661 x 44.4 x 62 mm Mounting Length 633 mm Case Length 605 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 96

101 POWER DISTRIBUTION 8 Outlets BS1363 PDU P/N: NB-ACC-059 Socket Type BS1363 (45 degree) Outlet Module (8) RoHS Yes Bracket Install Inverse installation Cable with plug BS A plug Control Function 16A Lighted master switch Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 640 x 44.4 x 62 mm Mounting Length 590 mm Case Length 562 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² POWER DISTRIBUTION UNITS 8 Outlets BS1363 PDU (32A) P/N: NB-ACC-047 Socket Type BS A (45 degree) Outlet Module (8) RoHS Yes Bracket Install Inverse installation Cable with plug IEC60309 plug, (32A 2p+E) Control Function No controlling function Case color Black Cable Specification 3 x 6.0 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 620 x 44.4 x 62 mm Mounting Length 592 mm Case Length 564 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 12 Outlets BS1363 PDU P/N: NB-ACC-003 Socket Type BS1363 (45 degree) Outlet Module (12) RoHS Yes Bracket Install Inverse installation Cable with plug BS A plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 901 x 44.4 x 62 mm Mounting Length 873 mm Case Length 845 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 97

102 POWER DISTRIBUTION POWER DISTRIBUTION UNITS 12 Outlets BS1363 PDU P/N:NB-ACC-060 Socket Type BS1363 (90 degree) Outlet Module (12) RoHS Yes Bracket Install 19 Frontal installation Cable with plug BS A plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 483 x 88.8 x 62 mm Mounting Length 465 mm Case Length 427 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 6 Outlets US-type PDU P/N: NB-ACC-005 Socket Type RoHS Bracket Install Cable with plug Control Function Case color Cable Specification Rating voltage Max. Power Dimension Mounting Length Case Length Fittings Safety Authentication Interior Connection wire IEC60906 Socket(NEMA5-15R)[6] Yes 19 Frontal installation IEC A plug Power switch, overload protecting & indicator Black 3 x 1.5 mm² x 3M 250VAC 50/60Hz 3250W L x W x H = x 44.4 x 62 mm 465 mm 432 mm 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual CE 1.5 mm² 6 Outlets US-type PDU P/N: NB-ACC-061 Socket Type IEC60906 Socket(NEMA5-15R)[6] RoHS Yes Bracket Install 19 Frontal installation Cable with plug IEC60906 plug(nema 5-15P 15A) Control Function 16A Lighted master switch Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 2500W Dimension L x W x H = 482 x 68 x 44.4mm Mounting Length 465 mm Case Length 429 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 98

103 POWER DISTRIBUTION 8 Outlets US-type PDU P/N: NB-ACC-062 Socket Type IEC60906 Socket(NEMA5-15R)[8] RoHS Yes Bracket Install 19 Frontal installation Cable with plug IEC60906 plug(nema 5-15P 15A) Control Function 16A Lighted master switch Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 2500W Dimension L x W x H = x 68 x 44.4mm Mounting Length 465 mm Case Length mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² POWER DISTRIBUTION UNITS 8 Outlets IEC PDU P/N: NB-ACC-048 Socket Type Single IEC320 C13 Socket (8) RoHS Yes Bracket Install 19 Frontal installation Cable with plug BS A plug Control Function No controlling function Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 482.6x 44.4 x 62 mm Mounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire 1.5 mm² 6 Outlets German-type PDU P/N: NB-ACC-063 Socket Type DIN A Socket [6] RoHS Yes Bracket Install 19 Frontal installation Cable with plug DIN A Plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = x 68 x 44.4mm Mounting Length 465 mm Case Length mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire Combined copper 99

104 POWER DISTRIBUTION POWER DISTRIBUTION UNITS 6 Outlets German-type PDU P/N: NB-ACC-064 Socket Type DIN A Socket [6] RoHS Yes Bracket Install 19 Frontal installation Cable with plug DIN A Plug Control Function No controlling function Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = x 68 x 44.4mm Mounting Length 465 mm Case Length mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire Combined copper 8 Outlets German-type PDU P/N: NB-ACC-065 Socket Type DIN A Socket [8] RoHS Yes Bracket Install 19 Frontal installation Cable with plug DIN A Plug Control Function Power switch, overload protecting & indicator Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = x 68 x 44.4mm Mounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire Combined copper 8 Outlets German-type PDU P/N: NB-ACC-066 Socket Type DIN A Socket [8] RoHS Yes Bracket Install 19 Frontal installation Cable with plug DIN A Plug Control Function No controlling function Case color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = x 68 x 44.4mm Mounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manual Safety Authentication CE Interior Connection wire Combined copper 100

105 End to End Telecom, Enterprise & Data Center Cabling Solutions ACTIVE PRODUCTS ETHERNET MEDIA CONVERSION SOLUTION INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION GIGABIT ETHERNET SWITCHES SFP FIBER TRANSCEIVERS

106 ACTIVE PRODUCTS ETHERNET MEDIA CONVERSION SOLUTION 10/100Base-TX to 100Base-FX Media Converters KC-300D, KC-300DM 102

107 ACTIVE PRODUCTS Web Smart 10/100/1000Base-T to 1000Base-X Gigabit Media Converter KGC-310M ETHERNET MEDIA CONVERSION SOLUTION 103

108 ACTIVE PRODUCTS ETHERNET MEDIA CONVERSION SOLUTION 1000Base-T to 1000Base-X Gigabit Media Converters KGC

109 ACTIVE PRODUCTS Multimode to Single Mode Fiber Media Converters KGC-311 ETHERNET MEDIA CONVERSION SOLUTION 105

110 ACTIVE PRODUCTS ETHERNET MEDIA CONVERSION SOLUTION Intelligent Media Converter Center Chassis KC

111 ACTIVE PRODUCTS ETHERNET MEDIA CONVERSION SOLUTION 107

112 ACTIVE PRODUCTS INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION Industrial 10/100Base-TX to 100Base-FX Media Converters KCD

113 ACTIVE PRODUCTS Industrial 10/100Base-TX to 100Base-FX Media Converters INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION 109

114 ACTIVE PRODUCTS INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION Industrial 1000Base-T to 1000Base-X Gigabit Media Converters KCD

115 ACTIVE PRODUCTS Industrial 1000Base-T to 1000Base-X Gigabit Media Converters INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION 111

116 ACTIVE PRODUCTS GIGABIT ETHERNET SWITCHES 16/24-Port 10/100/1000Mbps Web Smart Gigabit Ethernet Switches KGS-1604, KGS

117 ACTIVE PRODUCTS 16/24-Port 10/100/1000Base-T Gigabit Ethernet Switches KGS-116, KGS-124 GIGABIT ETHERNET SWITCHES 113

118 ACTIVE PRODUCTS SFP Fiber Transceivers SFP FIBER TRANSCEIVERS 114

119 End to End Telecom, Enterprise & Data Center Cabling Solutions TOOLKITS NETWORK TOOLKITS 116 FIBER OPTIC TOOLKITS

120 TOOLKITS Professional Network Installer s Tool Kit NETWORK TOOLKITS 6pcs Professional Screwdriver (-)3.0x75mm (+)PH0x75mm (-)5.0x100mm (+)PH1x100mm (-)6.0x150mm (+)PH2x150mm 8pcs Folding Hex Key Flashlight Tape Measure Utility Knife Impact and punch down tool with 1 spare blade Desoldering Pump Soldering Iron Digital Multimeter Utility Component Storage Box Cable Tester Universal Stripping Tool Solder Reel Multipurpose Precise Cutter & Stripper 5" Long Nose Pliers ; 6" Side cutter ; 6" long nose plier ;6" combination pliers ; 6" Adjustable wrench 6 pcs precision screwdriver 4 1/2" Diagonal Cutting Pliers Cable Cutter Multi-Modular Plug Crimps, Strips, and Cuts Tool Ratchet Type - Modular Plug Crimping Tool Heavy-Duty ABS Carry Tool Case P/N: NB-TLKT-N01 Network Maintenance Tool Kit Network Tool Kit P/N: NB-TLKT-N02 6pcs Professional Screwdriver (-)3.0x75mm (+)PH0x75mm (-)5.0x100mm (+)PH1x100mm (-)6.0x150mm (+)PH2x150mm 4 1/2" Side Cutter 5" Long Nose Pliers Multipurpose Precise Cutter & Stripper Utility Knife 7pcs Folding Hex Key Multi-Modular Plug Crimps, Strips, and Cuts Tool Universal Stripping Tool Cable Tester Punch Down Tool with 66 &110/88 Blades with 1 spare blade Durable Zippered Storage Case P/N: NB-TLKT-N03 Multi-Modular Plug Crimps Universal Stripping Tool Impact and punch down tool with 1 spare blade 4 1/2" Side Cutter 5" Long Nose Pliers 4pcs Screwdrivers: (-) 5 x 75mm ; (+) PH1 x 75mm (-) 6 x 100 mm ; (+) PH2 x 100 mm LAN Cable Tester General Purpose Tool Pouch 116

121 TOOLKITS Cold Cure Fiber Optic Termination Kit (For SC/ST/FC/LC Connectors) Fiber Optic Crimping Tool Precision Stripper Carbide Scribe SC & FC Polish Disc P/N: NB-TLKT-F01 ST Polish Disc LC Polish Disc Cleanser Glass Working Pad Rubber Working Pad 4 1/2" Side Cutter 5 PCS Cleaning Swabs Goggles Fiber Optic Wipes(5 wet and 5 dry) 2 PCS 6um Brown Diamond Polish Film 2 PCS 1um Purple Diamond Polish Film 2 PCS 0.05um White Diamond Polish Film 150mm Multi-Purpose Electronic Scissors 2 PCS Epoxy Application Syringes Two Part Epoxy PU Carrying Case FIBER OPTIC TOOLKITS Fiber Optic Epoxy & Polish Termination Kit (For SC/ST/FC/LC Connectors) P/N: NB-TLKT-F02 Contains all of the tools and consumable material necessary for epoxy and polish connector terminations Fiber optic kevlar cutter 200X Universal Microscope Jacket Stripper Connector Cleaner Mille or Clauss Stripper Kim Wipes Grey Buffer Tube Stripper 4 oz.bottle of Alcohol Universal Crimping tool (75)2.5mm Foam Swabs Fiber Cable Stripper Glass Polish Plate Round Cable Slitter 2.5mm Universal Polish Puck Round Cable Cutter 1.25mm Polish Puck 24 Port Connnector Hot Oven (5)Diamond Polish Film 15um Thermometer (5)Diamond Polish Film 9um Rubber Polish Pad (5)Diamond Polish Film 3um Utility knife (5)Diamond Polish Film 1um 3.5M Tape Measure (5)Diamond Polish Film 0.02um Precision tweezer (6)Epoxy Application Syringe 3ml Carbide fiber sceibe (5)EPO-TEK EPOXY Black Marker Carrying Case( mm) Fiber Fusion Splicing Tool Kit P/N: NB-TLKT-F03 This professional tool kit is ideal for optical fiber fusion splicing. It includes all the most frequently need tools and supplies required for cable sheath removal and fusion splicing Kevlar Shears 6Pcs Electronic Screwdriver Set Clauss Fiber Stripper Mini-Hacksaw Fiber Cable Stripper 8Pcs Folding type hex key set(inch) Round Cable Slitter Pro-soft Duplex color S/D(-)6 100mm Round Cable Slitter Pro-soft Duplex color S/D(+)#2 100mm Longitudinal Buffer Tube Slitter 8" Adjustable wrench Optical Fiber Jacket Stripper 4 oz.bottle of Alcohol Wire Rope Cutter IPA cleaner towels Longitudinal Cable Shenth Slitter Blow Brush Carbide fiber sceibe Utility knife 1/4'' Driver Socket Set 3.5M Tape Measure 7'' Lineman's plier (178mm) Precision tweezer 6'' Flat nose plier (135mm) Black Marker 6'' Bent nose plier (130mm) Carrying Tool Case( mm) 117