MXAN-LN series 1550 nm band Analog Intensity Modulators

Transcription

1 Fiber 1 nm band Analog Intensity s The are high bandwidth intensity modulators specially designed for the transmission of analog signals over optical fibers. The MXAN-LN s performance parameters meet the requirement of the most demanding analog transmission links for military and civil applications: the x-cut design offers an unmatched stability, the low insertion loss optimizes links gain and the high linearity preserves the signal quality. They are specially suitable for microwave links and remoted antennas. FEATURES High linearity Bandwidth 1 GHz, 2 GHz, 4 GHz High stability Low insertion loss Operation in C and L bands APPLICATIONS RoF Antenna remoting Microwave and Radar links Space and defence systems OPTIONS 13 nm, 1 nm, 8 nm versions Hermetic sealing Space qualified MXAN-LN-1 Performance Highlights Parameter Min Typ Max Unit Operating wavelength nm Insertion loss (with low IL option) db Electro-optical bandwidth GHz Vp khz -. - V 2 nd harmonic suppression ratio db Specifications given at 2 C, W, 1 nm MXAN-LN-2 Performance Highlights Parameter Min Typ Max Unit Operating wavelength nm Insertion loss db Electro-optical bandwidth GHz Vp khz - - V 2 nd harmonic suppression ratio db Specifications given at 2 C, W, 1 nm 111/17 / V4 / IF / ixblue/mxan-ln RELATED EQUIPMENTS DR-AN RF amplifiers MBC ditherless Bias Controllers Turn-key ModBox systems MXAN-LN-4 Performance Highlights Parameter Min Typ Max Unit Operating wavelength nm Insertion loss db Electro-optical bandwidth GHz Vp khz - - V 2 nd harmonic suppression ratio db Specifications given at 2 C, W, 1 nm Tel:

2 Fiber 1 nm band Analog Intensity s MXAN-LN-1 1 GHz Analog Intensity Electrical Characteristics Electro-optic bandwidth S 21 RF electrodes, from 2 GHz GHz Ripple S 21 DS 21 RF electrodes, f < 1 GHz -. 1 db Electrical return loss S 11 RF electrodes, f < 1 GHz db Vp khz VpRF khz RF electrodes -. 6 V Vp GHz VpRF 1 GHz RF electrodes V Vp DC electrodes VpDC DC electrodes V 2 nd harmonic suppression ratio H 1 - H 2 GHz db Input 3 rd order intercept IIP3 GHz dbm RF input impedance Z in-rf W DC input impedance Z in-dc MW W RF input Optical Characteristics Crystal - - Lithium Niobate X-Cut Y-Prop Operating wavelength l nm Insertion loss IL Without connectors db Low insertion loss option LIL Without connectors db DC extinction ratio ER Measured with narrow source linewidth < 2 MHz db Optical return loss ORL db Chirp a All specifications given at 2 C, 1 nm, unless differently specified 211/17 / V4 / IF / ixblue/mxan-ln Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit RF input power EP in - 28 dbm Bias voltage V bias V Optical input power OP in - 2 dbm Operating temperature OT +7 C Storage temperature ST C Tel:

3 Fiber 1 nm band Analog Intensity s MXAN-LN-2 2 GHz Analog Intensity Electrical Characteristics Electro-optic bandwidth S 21 RF electrodes, from 2 GHz GHz Ripple S 21 DS 21 RF electrodes, f < 2 GHz -. 1 db Electrical return loss S 11 RF electrodes, f < 2 GHz db Vp khz VpRF khz RF electrodes -. V Vp GHz VpRF 2 GHz RF electrodes V Vp DC electrodes VpDC DC electrodes V 2 nd harmonic suppression ratio H 1 - H 2 GHz, RF IN = dbm db Input 3 rd order intercept IIP3 GHz dbm RF input impedance Z in-rf W DC input impedance Z in-dc MW W RF input Optical Characteristics Crystal - - Lithium Niobate X-Cut Y-Prop Operating wavelength l nm Insertion loss IL Without connectors db DC extinction ratio ER Measured with narrow source linewidth < 2 MHz db Optical return loss ORL db Chirp a All specifications given at 2 C, 1 nm, unless differently specified 311/17 / V4 / IF / ixblue/mxan-ln Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit RF input power EP in - 28 dbm Bias voltage V bias V Optical input power OP in - 2 dbm Operating temperature OT +7 C Storage temperature ST C 3 6 Tel:

4 Fiber 1 nm band Analog Intensity s MXAN-LN-4 4 GHz Analog Intensity Electrical Characteristics Electro-optic bandwidth S 21 RF electrodes, from 2 GHz GHz Ripple S 21 DS 21 RF electrodes, f < 3 GHz -. 1 db Electrical return loss S 11 RF electrodes, f < 3 GHz db Vp khz VpRF khz RF electrodes - 6 V Vp GHz VpRF 2 GHz RF electrodes V Vp DC electrodes VpDC DC electrodes V 2 nd harmonic suppression ratio H 1 - H 2 GHz, RF IN = dbm db Input 3 rd order intercept IIP3 GHz dbm RF input impedance Z in-rf W DC input impedance Z in-dc MW W RF input Optical Characteristics Crystal - - Lithium Niobate X-Cut Y-Prop Operating wavelength l nm Insertion loss IL Without connectors db DC extinction ratio ER Measured with narrow source linewidth < 2 MHz db Optical return loss ORL db Chirp a All specifications given at 2 C, 1 nm, unless differently specified Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. 411/17 / V4 / IF / ixblue/mxan-ln Parameter Symbol Min Max Unit RF input power EP in - 28 dbm Bias voltage V bias V Optical input power OP in - 2 dbm Operating temperature OT +7 C Storage temperature ST C 4 6 Tel:

5 Fiber 1 nm band Analog Intensity s MXAN-LN-1 Typical S 21 S 21 (db) -1 S 11 (db) MXAN-LN-1 Typical S MXAN-LN-2 Typical S 21 MXAN-LN-2 Typical S 11-1 S 21 (db) S 11 (db) MXAN-LN-4 Typical S 21 MXAN-LN-4 Typical S /17 / V4 / IF / ixblue/mxan-ln S 21 (db) S 11 (db) Tel:

6 Fiber 1 nm band Analog Intensity s Mechanical Diagram and Pinout M1,6x.3-6H min 6,max (x4) 1, 12 1, All measurements in mm 1 9,6 82 4,7 6 6,3 4, 1, 4, 2,2 (x2) 2, 32,84,8 14 2, 2,,8 8 9 Port Function Note IN OUT RF Optical input port Optical output port RF input port Polarization maintaining fiber, Corning PM 1-U2D, Length 1. meter. Buffer diameter 9 mm Polarization maintaining fiber, Corning PM 1-U2D, Length 1. meter. Buffer diameter 9 mm MX-LN-1: Wiltron female K (SMA compatible) MX-LN-2: Wiltron female K or V (optional) MX-LN-4: Wiltron female V 1 Ground Pin feed through diameter 1. mm 2 DC Pin feed through diameter 1. mm 3, 4 Photodiode cathode, anode Pin feed through diameter 1. mm Ordering information MXAN-LN-BW-XX-Y-Z-AB-CD BW = Bandwidth : 1 1 GHz 2 2 GHz 4 4 GHz XX = Internal photodiode : Not integrated PD PD Integrated Y = Input fiber : P Polarization maintaining S Standard single mode Z = Output fiber : P Polarization maintaining S Standard single mode AB = Input connector : bare fiber FA FC/APC FC FC/SPC CD = Output connector : bare fiber FA FC/APC FC FC/SPC Note : optical connectors are Seikoh-Giken with narrow key or equivalent 9_217_PT_SP_ED3 611/17 / V4 / IF / ixblue/mxan-ln About us ixblue Photonics includes ixblue ixfiber brand that produces specialty optical fibers and Bragg gratings based fiber optics components and ixblue Photline brand that provides optical modulation solutions based on the company lithium niobate (LiNbO 3 ) modulators and RF electronic modules. ixblue Photonics serves a wide range of industries: sensing and instruments, defense, telecommunications, space and fiber lasers as well as research laboratories all over the world. Ixblue reserves the right to change, at any time and without notice, the specifications, design, function or form of its products described herein. All statements, specification, technical information related to the products herein are given in good faith and based upon information believed to be reliable and accurate at the moment of printing. However the accuracy and completeness thereof is not guaranteed. No liability is assumed for any inaccuracies and as a result of use of the products. The user must validate all parameters for each application before use and he assumes all risks in connection with the use of the products Tel: