Operating Instructions FULL HD LCD Display

Transcription

1 Model No. TH-55LFV5U Operating Instructions FULL HD LCD Display English Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. to tell the user that parts inside the product are a risk of electric shock to persons. triangle is intended to tell the user that important operating and servicing instructions are in WARNING : WARNING Do not defeat the purpose of the grounding plug. 2

3 Important Safety Instructions Keep these instructions. produce heat. they exit from the apparatus. 3

4 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. Visit our Panasonic Web Site Table of Contents Important Safety Instructions... 3 FCC STATEMENT... 5 Safety Precautions... 6 Maintenance... 7 Accessories Parts and Functions... 0 Control Panel... 0 Input/Output Terminals... Connections PC Connection Using Network Function Using Web Browser Control On-Screen Display Menu Input Mode... 3 Cleaning and Troubleshooting Cleaning

5 FCC STATEMENT operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only the provided power supply cord with ferrite core and DVI interface cable with two ferrite cores. 2 The user provided VGA video signal North America could void the user's authority to operate this device. received, including interference that may cause undesired operation. 2 CANADIAN NOTICE: NOTE: Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. Trademark Credits respected. 5

6 Safety Precautions CAUTION This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury When using the LCD Display Do not bring your hands, face or objects close to the ventilation holes of this Display. Top of this Display is usually very hot due to the high ventilation holes. Burns or personal injuries can happen Be sure to disconnect all cables before moving this Display. electric shock. Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning. Electric shocks can result if this is not done. Clean the power cable regularly to prevent it from becoming dusty. a dry cloth. NOTE: Image retention may occur. If you display a still picture for an extended period, the image might remain on the 6

7 Safety Precautions WARNING Setup Do not place this Display on sloped or unstable surfaces, and ensure that this Display does not hang over the edge of the base. The Display may fall off or tip over. Do not place any objects on top of this Display. Do not cover the ventilation holes. Transport only in upright position! this Display. Cautions for Wall Installation professional. Installing this Display incorrectly may lead to an accident that results in death or serious injury. used. NOTE: 9. An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. AC Power Supply Cord The Display is designed to operate on 0-27 V AC, 50/60 Hz. Ensure that the mains plug is easily accessible. Do not use any power supply cord other than that provided with this unit. Securely insert the power cord plug as far as it will go. Do not handle the power cord plug with wet hands. Doing so may cause electric shocks. Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. If If this Display will not be used for a long period of time, unplug the power cord from the wall outlet. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from this Display, unplug the power cord immediately. Continuous use of this Display under these conditions Have are strongly discouraged due to its high voltage dangerous nature. If water or foreign objects get inside this Display, if this Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately. made. Maintenance The front of this Display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. dry. If the cabinet becomes dirty, wipe it with a soft, dry cloth. Usage of a chemical cloth Do not use a chemical cloth for the panel surface. 7

8 Accessories Accessories Supplied Check that you have the Accessories and items shown Warranty control Wire clampers NOTE: The remote control is not supplied. 8

9 VESA Mounting. so as not to scratch the screen face. Protective Sheet 2. Ensure you have all accessories for 3. correct mounting procedures could result in damage to the equipment, or injury to the user or install personnel. The product VESA Grid 4. tighten them securely. Table Cautions when installing or moving To prevent this Display from falling: Do not touch any parts excep the handles. installation instructions, refer to the guide received resulting from fall of this Display in case of location. For portrait installation, please turn this Display right. Handle 90 NOTE: 9

10 Parts and Functions Control Panel Remote control sensor Power status Indicator MUTE INPUT MENU POWER button 2 MUTE button 3 INPUT button Used as [SET 4 [ ] button 5 [ ] button 6 [ ] button 7 [ ] button 8 MENU button 9 Remote control sensor and power status indicator Indicates the operating status of this Display: NOTE: mode When {SCHEDULE 0 KENSINGTON LOCK For security and theft prevention. 0

11 Input/Output Terminals AC IN 2 MAIN POWER SWITCH 3 IR TRANSMITTER IN / OUT IR TRANSMITTER IN 4 SERIAL OUT / SERIAL IN 5 LAN from control center. 6 HDMI AV IN 8 PC IN Input the PC source. 9 AUDIO IN 0 COMPONENT/VIDEO IN (BNC) device. AUDIO IN 2 (RCA) 2 AUDIO OUT (RCA) 3 Output the audio to your external speakers. 7 DVI-D IN / DVI-I OUT Digital video input and output connection.

12 Connections AC Cord Connection. P Cable Securing positions.. 2. Attach the clamper To remove from the unit: hole snaps Insert the clamper in a hole. Keep pushing both side snaps Bundle the cables To loosen: NOTE: hooks Set the tip in the hooks knob Keep pushing the knob 2

13 DVD/VCR/VCD Connection Using COMPONENT input Audio Out DVD / VCR / VCD IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y Using VIDEO input AV Out DVD / VCR / VCD IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y 3

14 Using HDMI video input DVD / VCR / VCD HDMI Out IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y Pin assignments and signal names for HDMI terminal: Pin No. Pin No CEC Hot Plug Detect 4

15 PC Connection Using PC input PC Out D-Sub 5 pin PC Audio Out IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y Signal names for mini D-sub 5-pin connector: Pin No. Pin No. Pin No B VD Using HDMI input HDMI Out PC IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y 5

16 Using DVI input PC Audio Out IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y DVI-D Input Connector Pin Layouts: Pin No. Pin No Hot Plug Detect DDC Clock 8 7 DDC Data DVI-I Output Connector Pin Layouts: Pin No. Pin No. Pin No. 3 C 2 4 C2 3 5 C3 4 6 Hot Plug Detect C4 5 7 C5 6 DDC Clock 8 7 DDC Data

17 Using audio out Audio In Stereo Amplifier IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y Using speakers out External speakers IR_In IR_Out RS232 Out RS232 In RJ-45 HDMI In DVI In DVI Out VGA Audio In YPbPr/CVBS Pr Pb Y Red Red Black Black 7

18 SERIAL Terminals Connection a computer. [RS-232C] Display No. NOTES: this Display. application for details. Signal names for SERIAL IN terminal: Pin No. DCD Communication parameters: Baud rate Parity Character length None Basic format for control data: Header MonitorID Category Code0 Code Length Control Data[0] Data[] ~ Data[N] Checksum 0xA6 0~26 0x00 0x00 0x00 N+3 0x0 Command Parameter The total from Header to Data[N] calculated by XOR NOTES: sending the next command. Command: Command Parameter Control Details 0x9 None 0x8 0x0 0x8 0x02 0x45 None 0x44 0~00 0x0, 0x00, 0x00, 0x00 Change source to VIDEO 0x03, 0x00, 0x00, 0x00 Change source to DVD/HD 0x09, 0x0, 0x00, 0x00 Change source to DVI 0x09, 0x00, 0x00, 0x00 Change source to HDMI 0x05, 0x00, 0x00, 0x00 Change source to PC 0x3B None 0x00 Change picture format to Normal 0x0 Change picture format to Custom 0x02 0x03 Change picture format to Full 8

19 Daisy-chain Connection NOTES: TILINGCONFIGURATION2 menu 28 signal or equipment to use. Display control connection (RS-232C Cable) Display No. Display No.2 Display No.3 [RS-232C] Digital video connection (DVI Cable) Display No. Display No.2 Display No.3 [DVI] External IR Receiver Display No. Display No.2 Use the connector cable of remote control supplied with TH-55LFV5 series to connect next display. 9

20 Using Network Function NOTE: LAN SETTING} setting and make sure to set the {SERIAL CONTROL} to {LAN page 2, 30 Network Connection Display (main unit, rear) Hub or broadband router NOTES: 20

21 OSD Menu Setup for Network Connection SERIAL CONTROL: LAN. Press [MENU 2. Press [ ] or [ ADVANCED OPTION} menu. 3. Press [INPUT 4. ] or [ {SERIAL CONTROL} menu, press [ ] or [ select {LAN}. 2 3 ADVANCED OPTION :SEL INPUT CHANGE TERMINAL SETTING COLOR SYSTEM SCAN MODE SERIAL CONTROL LAN SETTING INITIAL INPUT ADVANCED OPTION RESET FACTORY RESET NORMAL AUTO OVERSCAN LAN OFF SET :NEXT EXIT :RETURN MENU :EXIT MENU 5. Press [MENU press [MENU LAN SETTING: IP ADDRESS}, {SUBNET MASK}, and {DEFAULT GATEWAY} for this Display. NOTE: The {LAN SETTING {SERIAL CONTROL} to {LAN}.. Press [MENU 2. Press [ ] or [ LAN SETTING} menu. 3. Press [INPUT 4. ] or [ {DHCP CLIENT} menu, press [ ] or [ {ON}. 2 3 ADVANCED OPTION :SEL DHCP CLIENT IP ADDRESS SUBNET MASK DEFAULT GATEWAY +-:ADJ LAN SETTING EXIT :RETURN ON MENU :EXIT MENU 5. Press [MENU press [MENU DHCP CLIENT set this to {ON}. If DHCP server is not used, set this to {OFF}. IP ADDRESS Enter an IP address if DHCP server is not used. SUBNET MASK DEFAULT GATEWAY NOTES: To use a DHCP server, make sure the DHCP server is started. ADVANCED OPTION 2 3 INPUT CHANGE TERMINAL SETTING COLOR SYSTEM SCAN MODE SERIAL CONTROL LAN SETTING INITIAL INPUT ADVANCED OPTION RESET FACTORY RESET NORMAL AUTO OVERSCAN LAN OFF :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU 2

22 Using Web Browser Control NOTE: Web Browser Control Before Using Web Browser Control Dsiplay Setup LAN SETTING} setting and make sure to set the {SERIAL CONTROL} to {LAN2, 30 Computer Setup (for Windows operating system). Display [Internet Properties Click [Start] [Control Panel] [Network and Internet Connections] [Internet Options]. 2. Click the [ConnectionsLAN Settings]. 3. Deselect the [ ] and [ 4. Click [OK]. Enable JavaScript. Click [Start] [Control Panel] [Network and Internet Connections] [Internet Options]. 2. SecurityDefault Level Active scripting] from the [Custom Level 22

23 Access from Web Browser. 2. Enter the IP address from the {IP ADDRESSLAN SETTING2, Enter the {Username} and {Password Authentication screen 4. Click [OK]. NOTES: Default {Username} and {Password {Username}: admin {Password}:

24 On-Screen Display Menu Entering the OSD Menu Using this Display s control buttons OSD Menu Overview PICTURE menu PICTURE 2 3 BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL TINT COLOR COLOR TEMPERATURE USER COLOR GAMMA SELECTION NOISE REDUCTION FILM MODE PICTURE RESET 0000K NATIVE LOW AUTO :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU MUTE INPUT MENU. Press [MENU 2. Press [ ] or [ adjust. 3. Press [INPUT 4. ] or [ items, press [ ] or [ INPUT 5. Press [MENU press [MENU BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL TINT Press the [ purple. Press the [ slightly green. NOTE: This item is functional for HDMI, DVD/HD, and VIDEO inputs only. COLOR image. NOTE: This item is functional for HDMI, DVD/HD, and VIDEO inputs only. COLOR TEMPERATURE The options are: {3000K} / {4000K} / {5000K} / {6500K} / {7500K} / {9300K} / {0000K} / {NATIVE} / {USER}. USER COLOR With this function you can adjust the color tones of the image settings independently. 24

25 COLOR TEMPERATURE} is set to {USER}. GAMMA SELECTION The options are: {NATIVE} / {2.2} / {2.4} / {S GAMMA}. NOISE REDUCTION The options are: {OFF} / {LOW} / {MIDDLE} / {HIGH}. NOTE: This item is functional for HDMI, DVD/HD, and VIDEO inputs only. FILM MODE function. {AUTO for movies and motion pictures. The display converts a video signal format. {OFF signals. NOTE: This item is functional for HDMI, DVD/HD, and VIDEO inputs only. PICTURE RESET SCREEN menu 2 3 SCREEN :SEL AUTO SETUP AUTO ADJUST H POSITION V POSITION CLOCK CLOCK PHASE ZOOM MODE CUSTOM ZOOM INPUT RESOLUTION SCREEN RESET OFF FULL SET :NEXT EXIT :RETURN MENU :EXIT MENU AUTO SETUP display of PC input image. NOTE: This item is functional for PC input only. AUTO ADJUST sources automatically. {ON once a signal is connected. {OFF selected manually. NOTE: This item is functional for PC input only H POSITION Press the [ ] to move the image to the left. NOTE: This item is functional for PC input only. V POSITION Press the [ ] to move NOTE: This item is functional for PC input only. CLOCK NOTE: This item is functional for PC input only. CLOCK PHASE NOTE: This item is functional for PC input only. ZOOM MODE PC mode: {FULL} / {NORMAL} / {CUSTOM} / {REAL}. Video mode: {FULL} / {NORMAL} / {CUSTOM} / {REAL}. FULL This mode restores the correct proportions of pictures transmitted in 6:9 using the full screen display. NORMAL The picture is reproduced in 4:3 format side of the picture. CUSTOM REAL CUSTOM ZOOM ZOOM MODE} setting is set to {CUSTOM}. ZOOM H ZOOM image only. 25

26 V ZOOM only. CONFIGURATION menu CONFIGURATION H POSITION image left or right. NOTE: This item is functional for PC input only. V POSITION Moves the vertical position of the image NOTE: This item is functional for PC input only. 2 3 OFF TIMER SCHEDULE DATE AND TIME CONFIGURATION RESET OFF INPUT RESOLUTION correctly. NOTE: This item is functional for PC input only. The options are: { / / / } { / } { / } {Auto}: Determines the resolution automatically. SCREEN RESET SCREEN menu to factory preset values. AUDIO menu AUDIO :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU OFF TIMER The options are: {OFF, HOUR ~ 24HOURS} from currrent time. SCHEDULE scheduled time intervals for this Display to activate. You can select: The time for this Display to turn on and turn off. scheduled activation period. NOTE: You should set up current date and time in {DATE AND TIME. Press [SET SCHEDULE 2 3 BALANCE TREBLE BASS AUDIO RESET TODAY THU 20 : 9 : 55 2 ON OFF INPUT 3 : : EVERY DAY WED SAT MON THU SUN TUE FRI EVERY WEEK +-:SEL EXIT :RETURN MENU :EXIT MENU :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU BALANCE TREBLE BASS AUDIO RESET AUDIO menu to factory preset values. 2. Press [ ] or [ SET 26

27 SCHEDULE TODAY THU 20 : 9 : ON OFF INPUT 3 : : 4 5 EVERY DAY MON TUE WED SAT THU SUN FRI EVERY WEEK +-:SEL EXIT :RETURN MENU :EXIT MENU 3. Press [ ] or [ POWER-ON schedule: Press [ ] or [ set the hour and minute for this Display to turn on. 2 POWER-OFF schedule: Press [ ] or [ set the hour and minute for this Display to turn off. schedule. 3 INPUT-SOURCE selection: Press [ ] or [ to select an input source. If no input source is last selected. 4 DATE schedule: Press [ and then press the [SET 4. For more schedule settings, press [EXIT selected schedule is in effect. The {EVERY DAY} selection in a schedule item takes DATE AND TIME clock. DATE AND TIME YEAR MONTH DAY HOUR MINUTE DAYLIGHT SAVING TIME CURRENT DATE TIME OFF :00:00 :SEL +-:ADJ EXIT :RETURN MENU :EXIT MENU. Press [SET 2. Press [ ] or [ YEAR}, {MONTH}, {DAY}, {HOUR}, {MINUTE}, and {DAYLIGHT SAVING TIME} settings. 3. Press [ ] or [ {DAYLIGHT SAVING TIME}. CONFIGURATION RESET CONFIGURATION menu to factory preset values. CONFIGURATION2 menu CONFIGURATION2 :SEL LANGUAGE OSD TURN OFF OSD H POSITION OSD V POSITION INFORMATION OSD MONITOR INFORMATION MONITOR ID IR CONTROL TILING POWER ON DELAY CONFIGURATION2 RESET ENGLISH SEC. OFF SET :NEXT EXIT :RETURN MENU :EXIT MENU LANGUAGE The options are: { } / { } / { } / { } / { } / { } / { } / { } / { }. OSD TURN OFF The options are: {5 ~ 20} seconds. OSD H POSITION OSD V POSITION INFORMATION OSD OFF} selection. The options are: {OFF, 3 SEC. ~ 0 SEC.}. MONITOR INFORMATION MODEL NAME and SERIAL. MONITOR ID connected

28 IR CONTROL {NORMAL remote control. {LOCK To unlock, press and hold the [RECALL TILING 25 up to 5-set each at the vertical and horizontal side TILING H MONITORS V MONITORS POSITION FRAME COMP. ENABLE OFF OFF :SEL +-:ADJ EXIT :RETURN MENU :EXIT MENU ENABLE in {H MONITORS}, {V MONITORS}, {POSITION}, and {FRAME COMP.}. POWER ON DELAY the connected devices at different timings. The options are: {OFF}, {2 SEC.}, {4 SEC.}, {6 SEC.}, {8 SEC.}, {0 SEC.}, {20 SEC.}, {30 SEC.}, {40 SEC.}, {50 SEC.}. CONFIGURATION2 RESET CONFIGURATION2 menu to factory preset values. CONFIGURATION3 menu CONFIGURATION3 H MONITORS 2 POWER SAVE HEAT STATUS SCREEN SAVER SIDE BORDER COLOR CONFIGURATION3 RESET 5 V MONITORS POSITION 3 3 :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU H MONITORS POSITION POWER SAVE POWER SAVE RGB ON VIDEO ON V MONITORS :SEL +-:ADJ EXIT :RETURN MENU :EXIT MENU {RGBON HDMI, DVI, or PC inputs after 30 seconds. {VIDEOON VIDEO or DVD/HD inputs after 30 minutes. H MONITORS V MONITORS vertical side. POSITION screen matrix. FRAME COMP. in order to accurately display the image. 28

29 HEAT STATUS Display at any time. ADVANCED OPTION menu ADVANCED OPTION HEAT STATUS COOLING FAN TEMPERATURE: SENSOR SENSOR 2 OFF 35.7 C / 96.2 F 30.2 C / 86.3 F 2 3 INPUT CHANGE TERMINAL SETTING COLOR SYSTEM SCAN MODE SERIAL CONTROL LAN SETTING INITIAL INPUT CALIBRATION DATA SAVE CALIBRATION DATA LOAD ADVANCED OPTION RESET FACTORY RESET NORMAL AUTO OVERSCAN RS - 232C OFF EXIT :RETURN MENU :EXIT MENU SCREEN SAVER image persistence. :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU SCREEN SAVER COOLING FAN BRIGHTNESS MOTION AUTO OFF OFF :SEL +-:ADJ EXIT :RETURN MENU :EXIT MENU {COOLING FANON} to turn on the cooling fan AUTO} to turn on/off the cooling fan The default {AUTO fan if the temperature of 65 C52 F 30 minutes after cooling 62 C44 F screen once the temperature reaches 79 C function except [Power Once the temperature reaches 80 C76 F {BRIGHTNESSON {MOTION 0 ~ 900 / {OFF SIDE BORDER COLOR sides of 4:3 images. CONFIGURATION3 RESET CONFIGURATION3 menu to factory preset values. INPUT CHANGE NORMAL} or {QUICK}. NOTE: The selection {QUICK} may cause a slight noise. TERMINAL SETTING to their signal format depending on their source device. {DVI MODE DVI-PC DVI-HD device. {HDMI SIGNAL}: Used for HDMI signal. LIMITED FULL 2 3 ADVANCED OPTION :SEL DVI-MODE HDMI SIGNAL +-:ADJ TERMINAL SETTING EXIT :RETURN DVI-PC FULL MENU :EXIT MENU COLOR SYSTEM The options are: {AUTO} / {NTSC} / {PAL} / {SECAM} / {4.43NTSC} / {PAL-60}. NOTE: This item is functional for VIDEO input only. SCAN MODE {OVERSCAN the image. The rest of the areas surrounding the image {UNDERSCAN 29

30 NOTE: This item is functional for HDMI only. SERIAL CONTROL The options are: {RS-232C} / {LAN}. NOTE: If {LAN} is selected, then {RS-232C LAN SETTING IP ADDRESS}, {SUBNET MASK}, and {DEFAULT GATEWAY} for this Display. 2 3 ADVANCED OPTION DHCP CLIENT IP ADDRESS SUBNET MASK DEFAULT GATEWAY LAN SETTING OFF ADVANCED OPTION RESET NO YES :SEL SET :SET EXIT :RETURN MENU :EXIT MENU FACTORY RESET PICTURE}, {SCREEN}, {AUDIO}, {CONFIGURATION}, {CONFIGURATION2}, {CONFIGURATION3}, and {ADVANCED OPTION} to factory preset values.. Press [SET 2. Press [ ] or [ YES}, and then press [SET FACTORY RESET NO YES :SEL SET :SET EXIT :RETURN MENU :EXIT MENU :SEL +-:ADJ EXIT :RETURN MENU :EXIT MENU INITIAL INPUT CALIBRATION DATA SAVE user at any timing. CALIBRATION DATA LOAD mode ADVANCED OPTION RESET ADVANCED OPTION menu to factory preset values.. Press [SET 2. Press [ ] or [ YES}, and then press [SET 30

31 Input Mode PC Resolution: Dot Clock H Pixels V Lines : :9 Wide Video : Extended 4: : : : : : : :3 HD :9 HD080 SDTV Resolution: Dot Clock H Pixels V Lines 480i :3 480p 576i :3 576p HDTV Resolution: H Pixels V Lines 720p i p Dot Clock 6:9 6:9 6:9 Normally DVB Mode Mode Mode INPUT The DVI support mode is regarded as same to the PC support mode. 3

32 Cleaning and Troubleshooting Cleaning Caution When Using this Display maintenance procedure. Front Panel Cleaning Instructions cloth. liquid. Wipe the surface of this Display to remove dirt. Then use a dry cloth of the same type to dry. Cabinet Cleaning Instructions 32

33 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptom Possible Cause Remedy No picture is displayed Interference displayed on this Display or audible noise is heard Color is abnormal Picture is distorted with abnormal patterns After changing input source or signal, Picture is not displayed correctly. size of the screen Can hear sound, but no picture The selected input has no connection. 4. properly.. properly. 2. correctly. Improperly connected source signal Connect a signal connection to this Display. Move this Display to another location to see is the interference is reduced.. 2. Check the video signal source of this Display. Please verify its display geometry and time frequency parameter. sound inputs are correctly connected. Can see picture but no sound is heard. Improperly connected source signal [MUTE] is turned on. 4. No external speaker connected. Some picture elements do not light up on. After-Images can still be seen on this Display after this Display is powered logos, video games, computer images, and images displayed in 4:3 normal mode) extended period of time.. sound inputs are correctly connected. 2. Press [ ] or [ sound. 3. MUTE] 4. Connect external speakers and adjust This display is manufactured using an extremely high level of precision pixels of this Display may not display. This is not a malfunction. for an extended period of time as this remain on this Display. 33

34 Picture Symptoms Sound Interference Normal Picture Cars / Motorcycles Fluorescent light Checks Volume No Picture No Picture Normal the input terminal indication is displayed. performed. the unit. I can hear sounds coming from inside the unit. temperature. There are no adverse effects on the performance or other aspects. quality. 26, 28 Symptoms Checks The unit digitally processes the various signals in order to reproduce esthetically Due to the characteristics of the system used to drive the panel, the edges may indicative of malfunctioning. performance of your LCD. Image retention may occur. If you display a still picture for an extended period, This is not considered as malfunction. Image retention appears 34

35 Technical Specifications Display: Item 55 LCD 6:9 Pixel Pitch 500 cd/m2 400: In/Out Terminals: Item HDMI Input Video : 480i, 480p, 720p, 080i, 080p PC Input Component Input Composite Input General: Item 220 W < 0.5 W < 2 W Dimensions [W x H x D] 25.5 x x 2.2 mm, x x 4.77 Weight Operating Condition: Item Temperature 0 ~ 40 C, 32 ~ 04 F Humidity 0 ~ 2,000 m 35

36 considerations. For disposal or recycling information, please visit or call Customer s Record Panasonic Corporation 203 Panasonic Solutions Company Panasonic Canada Inc. Mississauga, Ontario L4W 2T3