Safety Instructions. General Safety Instructions

Transcription

1

2 Table of Contents Safety Instructions...2 General Safety Instructions...2 Installation...3 Cleaning...4 General Description...5 Specifications & Accessories...5 Specifications...5 Accessories...5 Input terminals...5 Product Preparation...6 Stand Assembly...6 Wall Mounting Instructions...6 Turning the TV On...7 External Connections and Controls...8 Playing from External devices...9 Remote Control...10 Getting Started...11 Powering the TV...11 First Use...11 Menus...12 Channel Menu...12 Picture Menu (DTV mode)...12 Sound Menu (DTV Mode)...13 Time Settings...13 Lock Menu...14 System Menu...14 PVR File System...15 TV Menu (DTV mode)...15 Media Playback...16 Photos...16 Music...17 Videos...17 Text...18 Troubleshooting

3 Safety Instructions General Safety Instructions Risk of electric shock. DO NOT OPEN! Do not attempt to service the television yourself, as opening or removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to the Kogan customer support team. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The television should not be exposed to dripping or or splashing, and no liquid filled objects such as vases should be placed on the case. In the event of smoke, strange noises or a strange smell from the unit, you should follow these steps: Turn off the unit immediately. Disconnect the power plug from the power outlet. Contact the Kogan customer support team. Never attempt to make repairs yourself. Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill any liquids onto the set. Use special caution in households where children are present. The television is not suitable for children under 4 years old to operate. Power supply cords should be routed safely to prevent dangers due to damaged cords. The mains plug is the main disconnect method, so it should be easily accessible and not be obstructed during use. To avoid fires, no naked flame sources such as lit candles or burning incense should be placed onto the casing of the television. Do not pull the plug out of a power outlet by pulling on the power cable. Always grasp the plug and pull. 2

4 Never touch the plug with wet hands. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them may be fatal. Always turn the set off when it is not being used. Unplug the television from the power outlet when it will not be used for a long time or when there is an electrical storm. Never touch the antenna cable during a lightning storm. Excessive volume from earphones and headphones can cause permanent hearing loss. Always monitor the volume of noise from these devices, especially when children are using them. Installation Ventilation should not be impeded or limited by covering the ventilation slots with items such as newspapers, tablecloths, curtains etc.. At least 10cm of space should be left around the apparatus for sufficient ventilation. The television should be situated away from heat sources such as radiators, heaters, stoves or other products that product heat. Place the television in a position where the screen is not exposed to direct sunlight. It is best to have soft indirect lighting while watching, and you should avoid a completely dark viewing environment and reflections to avoid eye fatigue. Keep the product away from high magnetic fields (such as near an amplifier speaker) to avoid affecting the tint. 3

5 Do not place the television on an unstable table, stand or shelf. The set may fall, causing serious injury as well as damage to the television itself. If moving the television on a cart, move the unit with care as sudden stops and starts may cause the television to overturn. Do not place this television near water, for example near a bathtub, wash bowl, kitchen sink, laundry tub, swimming pool or in a damp basement etc.. When moving the television to a warm location from a cold location, allow some time for any dew or condensation inside the television to evaporate fully before you turn the unit on. To prevent injury, the television must be securely attached to the floor/wall in accordance to the supplied installation instructions. Cleaning Unplug the television from the power supply before cleaning. Do not use any liquid cleaners or harsh chemicals. Use a soft, damp cloth. 4

6 General Description Zero X radiation complies to green environment protection requirements 16:9 widescreen Auto tuning and fine tuning. Component compatible (480i, 480P, 576i, 576P, 720P, 1080i, 1080P) Programmable sleep timer No signal automatic power off Specifications & Accessories Specifications Model Display Screen Size KALED55UHDUA 55 Diagonal Maximum Resolution 3840 x 2160 Power Supply TV Receive System ~ V, 50/60Hz PAL/SECAM: BG, DK, I DVB-T Frequency Range DTV: 5-12, Video In Accessories Remote Control Antenna Input Impedance Speaker Output Power Remote Power Input Power Consumption Standby Consumption PAL/NTSC/SECAM 75ohm unbalanced 2 x 8W DC 3V (Two AAA batteries) 130W <0.5W Operating Temperatures 0 C ~ 40 C Input terminals 1 x Antenna jack 4 x HDMI inputs 1 x PC-RGB input 1 x USB input 1 x COMPONENT input 1 x Headphone output 1 x AV input 1 x SPDIF output 5

7 Product Preparation If you need to remove or assemble the stand, please read the following: Before attaching/detaching the stand, be sure to turn the TV off. Before performing any work, spread cushioning out over the base area to lay the TV on. This will prevent it from being damaged. Do not apply any pressure to the screen display area, which may compromise the integrity of the display. The Kogan warranty does not cover user abuse or other damage caused by improper installations. Stand Assembly 1. Place the TV unit face down on a soft, flat surface (blanket, foam, cloth etc..) to prevent any damage to the screen. 2. Attach the stand to the bottom of the TV using the four MB4 x 16mm screws. Wall Mounting Instructions We suggest that the TV is mounted with at least 6cm gap to the wall to prevent cable interference. Before mounting the TV to the wall, the stand must be removed (if it is in place). To attach the wall mount to the TV: 1. Remove the TV stand screws. 2. Remove the stand from the TV. 3. Secure the wall mount bracket to the back of the TV using four large screws. Follow the installation instructions of the TV mount itself. NOTES The wall mount bracket is not included with the TV. Please confirm that your wall has the strength to withstand the weight of the TV. Be careful not to scratch the panel and TV cabinet when you fasten the screws to the TV. 6

8 Turning the TV On 1. Install the stand and place the TV on a solid surface. Ensure that the TV is place in a position which allows free flow of air. Do not cover any ventilation openings on the back cover. To prevent unsafe situations, no flame sources such as lit candles should be place on or near the TV. Avoid heat, direct sunlight and exposure to rain or water. 2. Connect the antenna cable to the ANT IN aerial socket on the back of the TV set. 3. Remove the battery compartment cover on the remote control and insert two AA batteries, taking note of the polarity markings. 4. Plug the TV power cord into a wall power outlet. 5. Turn the TV on by pressing.on the remote control or the POWER button on the side control panel of the TV. 7

9 External Connections and Controls Connections Side Controls # Item Description 1 Coax Coax Output 2 AV 3 YPbPr 4 Line Out 5 HDMI 1 HDMI 2 HDMI 3 HDMI 4 Connect a video and audio output jack from a DVD or VCR player. Connect video cables from a component device. Output can be connected to an amplifier or headphones. Connect HDMI devices to these jacks. An HDMI cable carries both video and audio. You do not need to make a separate audio connection. 6 RF Antenna cable connection 7 USB Insert a USB storage device to the USB port of the TV to view photos or listen to MP3 music. # Item Description 1 INPUT Press to select the input source. Press VOL+ button to change to the selected input source. 2 MENU Press to open or close the menu 3 VOL + Press to increase volume. 4 VOL - Press to decrease volume. 5 CH + Press to go to the next channel. 6 CH - Press to go to the previous channel. 7 POWER Press to turn the TV on or off (standby mode). When the TV is off, power still flows to it. To completely cut all power supply to the TV, unplug the power cord or turn the wall switch off. Connecting to an antenna wall jack 8

10 Connecting to an external audio/video device HDMI Cable (best method) Component Cables Composite Cable Note: HDMI cables carry both audio and video. You do not need to use a separate audio cable. Note: Cables are often colour coded so you can match the colour-coded jacks. Connecting Optical Out Note: turn the TV and external devices OFF before making connections. Playing from External devices 1. Turn on the TV and the connected device. 2. Press INPUT to open the input source list, then press / to highlight the input to which the device has been connected, then press OK to select. Select TV to watch live TV from the RF input. Select HDMI1, HDMI2, HDMI3 or HDMI4 to play from a device connected to the HDMI1, HDMI2, HDMI3 or HDMI4 inputs. Select Composite to play from a device connected to the COMPOSITE input. Select Component to play from a device connected to the COMPONENT input. 9

11 Remote Control 10

12 Getting Started Important: make sure all relevent equipment is connected properly before connecting the unit to a wall power socket and turning on the power. Powering the TV To turn the power ON or OFF: Plug the power cord into a suitable power point, then turn the power on at the outlet. Press the POWER/STANDBY button on the right lower side of the back panel (or on the remote control, making sure to aim it at the sensor at the front of the TV); the indicator will glow green. Press it again to power off (standby mode), and the indicator will glow red. First Use When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as illustrated below. Language: use the / buttons to select your OSD (on screen display) language, then use the button to go to the next item. Country: use the / buttons to select the country you are living in, then use the button to go to the next item. Time Zone: use the / buttons to select the time zone you are living in, then use the button to go to the next item. Tune Type: use the / buttons to select the type of scan, then use the button to go to the next item. Press the OK button to begin scanning for stations. To exit channel tuning, press the MENU or the EXIT button, then use the / buttons to select YES. Select NO to continue tuning. When auto-searching is complete, your TV will display the first channel located. 11

13 Menus The TV set contains different settings menus where you can program your preferred settings. Once you have programmed any settings, the unit will then retain them in memory until you change them again, even when switching the unit to standby mode. This means you can always operate the system under the same conditions. Channel Menu Press MENU on the back panel or remote control to display the main menu. Press / to select different submenus. Press OK to enter the submenu page. Press / to select your preferred option. Press / to adjust the values. Press MENU to return to the previous menu page. Press EXIT to exit the menu page. Picture Menu (DTV mode) Picture Mode: available options: Standard, Mild, Personal, Dynamic. Contrast/Brightness/Saturation/Sharpness/Tint: these values can only be adjusted when the picture mode is in personal mode. Press the / buttons to decrease or increase the values. Press the / buttons to switch between the settings. NOTE: Tint can only be adjusted when in NTSC mode. Australia's video standard is PAL. Colour Temp: use this to adjust the optimum colour temperature suitable for viewing. Available options are: Cool, Normal, Warm. Noise Reduction: Available options: Off, Low, Middle, High, Default. Aspect Ratio: Available options: Auto, 16:9, 4:3, Zoom1, Zoom2 HDMI Mode: Auto, Video, PC 12

14 Sound Menu (DTV Mode) Sound mode: Available options: standard, music, movie, sports, personal Treble/Bass: use these items to adjust the levels of higher pitched sounds (treble) and lower-pitched sounds (bass) from 0 to 100. Note: these values can only be adjusted when the sound mode is set to personal. Balance: use this to adjust the audio output from the left and right speakers from -50 to 50. Auto Volume Level: use this to turn auto volume control on and off. AD (Audio Description): press OK to enter, then you can switch AD ON or OFF. When AD is set to ON, you can adjust the volume level. Note: Audio descriptions for visual representation works only with programs that contain the related narration information. S/PDIF Mode: use this to select the S/PDIF audio output type: Off, Auto, PCM. Audio Delay: adjust this setting to synchronize the audio and video. Time Settings Press the OK button to enter. Press the / buttons to select the desired item. Press the / buttons to adjust the values. Clock: not user adjustable. TV receives time values from the broadcast signal. Time Zone: used to select the desired time zone. Sleep Timer: used to adjust the sleep timer. Available options: OFF, 15/30/45/60/90/120/240 minutes. No Action Auto Sleep: Used to adjust the timer that will turn the TV off after a period of inactivity. Available options; ON, OFF. Auto Standby: Used to select the auto-standby duration. Available options: OFF,3H,4H,5H. OSD Time: Use to select the desired OSD (on-screen display) menu duration. Available options: 10/15/20/30 seconds. 13

15 Lock Menu System Lock Press OK or to enter. Input the factory default password "0000" using the numbers on the remote control. NOTE: if you forget your password, the master password is "4711". Press the / buttons to turn the lock settings ON or OFF. Set Password Press OK or to enter. Follow the on-screen instructions and input the old password, then the new password. Channel Lock Press the OK or to enter. Press the / buttons to select the channel you want to lock. Press the GREEN button repeatedly to lock/unlock the highlighted channel. Parental Lock Use this item to select the desired program rating. Available options: No Block, Block All, Block G and above, Block PG and above, Block M and above, Block MA and above, Block AV and above, Block R and above. Key Lock Use this to the turn the keypad on the TV on or off. System Menu OSD Language Use this to select the desired on-screen display language. TT Language Use this to select the desired language for teletext display. (Please note that teletext is not available in Australia anymore) 14

16 Audio Language Press OK or to enter. Then you can select the desired primary and secondary audio language (only adjustable if there is a signal). Subtitle Language Press OK or to enter. Then you can select the desired primary and secondary subtitle languages and turn on/off the hearing impaired function when this mode is on (only adjustable if there is a signal). Hearing Impaired This item is used to set Hearing Impaired function ON or OFF. For hearing impaired users, this function can assist them to know a certain scene or action through the caption instead of hearing it. Note: hearing impaired function works only when you are viewing programs that contain suitable captions. PVR File System Press / buttons to select the USB drive. Check PVR File System: press OK to check the health of the USB drive file system. Format: press OK to select the file system type, then click OK again to format the USB drive. Time Shift Size: press OK, then press / buttons to select the time shift buffer size. Free Record Limit: press / buttons to select the free record time limit. TV Menu (DTV mode) Auto Scan Press OK or to enter. Enter you password (the factory default password is "0000"), then select 'Auto Tuning" and press OK or to start scanning. DTV Manual Scan Press OK or to enter. Enter your password (the factory default password is "0000"). Press buttons to select the channel, then press OK to search. Program Edit Press OK or to enter. Enter your password (the factory default password is "0000"). Press / buttons to highlight the desired channel. Press the RED button on the remote to delete the highlighted channel. Press the BLUE button on the remote to skip the highlighted channel. Select the channel you wish to move, then press the YELLOW button to enter move mode. Use the / buttons to select the preferred position, then press the YELLOW button again to move the channel. Press the FAV button to add the channel to the favourites list. 15

17 Schedule List Press / to select this option, then press OK to enter. If any programs are scheduled through the Add menu (pressing YELLOW on the remote control) then the below menu will appear. Press / buttons to switch between Schedule List and Recorded List. Press the RED button to delete the highlighted option. Press the YELLOW button to enter the add menu page. Press the BLUE button to enter the edit menu page. Signal Information This is used to display signal details, such as channel number, frequency, quality and strength. Media Playback Insert a USB memory device into the USB port. Press the SOURCE button on the back panel or on the remote control to switch the unit to USB mode. (Alternatively, press the MEDIA button on the remote control to enter USB mode directly). Press / / / buttons to move the cursor. Press the EXIT button to return to the previous menu. Photos Press / buttons to select Photo in the main menu, then press OK to enter. Select the USB drive and press OK. Only photo files can be played in this menu category. Use / / / buttons to select the desired folder or file, then press OK to open them. Press PLAY to start playing the files. 16

18 Press the RED button on the remote control to access the sub menu functions such as Delete. When playing photo files: Press the DISPLAY button on the remote control to display the on-screen tool bar. Press button to hide the tool bar. Use / buttons then press OK to select a function such as Previous, Next, Repeat, Rotate, Zoom In/Out etc.. from the on-screen toolbar. Note: you can only rotate a photo when the slideshow is paused. Music Press / buttons to select Music in the main menu, then press OK to enter music mode. Select the USB drive, then press OK. Music files can only be played in this menu category. Use / / / buttons to select the desired folder or file, then press OK to open the folder or file. Press PLAY to start playing the files. Press the RED button on the remote control to access sub menu functions such as delete. When playing music files: Press the DISPLAY button on the remote control to display the on-screen toolbar or button to hide the toolbar. Use / buttons, then press OK to select a function such as Fast Rewind, Previous, Next, Mute, Repeat etc.. from the on-screen toolbar. Videos Press / buttons to select Movie in the main menu, then press OK to enter movie mode. Select the USB drive, then press OK. Movie files can only be played in this menu category. Use / / / buttons to select the desired folder or file, then press OK to open the folder or file. Press PLAY to start playing the file. When playing movie files: Press the DISPLAY button on the remote control to display the on-screen toolbar or button to hide the toolbar. Use / buttons to select your option, then press OK to confirm. 17

19 Text Press / buttons to select Text in the main menu, then press OK to enter text mode. Select the USB drive, then press OK. Text files can only be viewed in this menu category. Use / / / buttons to select the desired folder or file, then press OK to open the folder or file. Press PLAY to display the file. When playing text files: Press the / buttons to display the previous/next page. Press the DISPLAY button on the remote control to display the on-screen toolbar. Press button to hide the toolbar. Press / buttons to select the preferred option, then press the OK button to confirm. Troubleshooting If you have any problems with your television, please check the suggested solutions below, as these issues may be caused by improper adjustment/setup rather than a malfunction with the unit. If the problem persists, please contact the Kogan customer support team. Problem Possible Solution Poor picture and sound quality Try a different channel Adjust the antenna Check all connections No picture or sound in TV status Try another channel Press the TV/AV button Make sure TV is plugged in Check the antenna connection No sound, or sound is too low at maximum volume Check the volume settings on any external speakers connected to your television Adjust the TV volume accordingly Check that MUTE hasn't been turned on No colour, wrong colour or tints Make sure the program itself is broadcast in colour Select the picture menu, then adjust the colour and tint submenus Picture rolls vertically Check all connections Blurred or snowy picture, distorted sound Check direction, location and connections to your antenna Issues may be caused by use of an indoor antenna Remote control malfunctions Replace remote control batteries Check battery terminals Remote is out of range, move closer to TV Confirm there is no obstructions between remote and TV Make sure power cord is plugged in Image is not centered on the screen Adjust the horizontal and vertical position 18