It receives contents from 4 DVB-T/T2, DVB-S/S2 or DVB-C transponders/muxes and broadcasts them in 4 DVB-T, DVB-C or IP output channels.

Transcription

1 + HTI HEADEND It receives contents from DVB-T/T, DVB-S/S or DVB-C transponders/muxes and broadcasts them in DVB-T, DVB-C or IP output channels. Quad universal tuner Output DVB-T or DVB-C selectable channels Remote managment enabled It allows a future increase in services It allows a video service to be sent with several different languages without taking up more space It allows channel lineups to be created and managed remotely Power supplied through the backplane, without bridges European Product HTI Headend [56]

2 + OUTPUT TEST OUTPUT GAIN EXT INPUT INPUT INPUT TEST -0 db Gain 6 db -0 db HTI HEADEND Headend that allows to use four independent inputs (to be used with a multiswitch) or to use in Input + Loop through mode (for Unicable or terrestrial/cable antenna installations). QUAD UNIVERSAL TUNER Receives four independent multiplex/transponders in any common DVB format REMOTE CHANNEL MANAGEMENT Control of several headends from one point COMPATIBLE WITH IKUSI HEADEND DISCOVERY Allows to detect the modules of the header without having to modify the PC network configuration 0 DVB-S/S DVB-T/T Multiswitch MULTISTREAM SUPPORTED + 00 additional TV channels DVB-T ; DVB-C Output PRE-BOOKING OF CHANNELS To prevent a future rescanning of the televisions PSU-50 HTI-0 HTI-0 HTI-0 HTA-5 PSU-50 HTI-0 HTA-5 USB-00 router internet computer SEPARATION OF AUDIOS Generation of one TV channel for each audio INDEPENDENT OUTPUT CHANNELS Distributed over any part of the band INTERCONNECTED BASE-PLATE REDUNDANT POWER SUPPLY Power supplied through the backplane, without bridges Ikusi Multimedia CATALOGUE [57]

3 HTI HEADEND DVB-T and DVB-C Output DVB-T/T/S/S/C DVB-T/C Quad transmodulator HTI-0 REF. 86 Inputs Input frequency range MHz DVB-T/T : 7-86 DVB-S/S : DVB-C : 7-86 Input level dbµv 0-9 Symbol rate Maximum input current Fitted with DiSEqC (v..) TS Procesing PSI/SI adaptation NIT adaptation SDT adaptation LCN, TDT, TOT management MS/s DVB-S:...5 DVB-S:... 5 DVB-C: mA in, and connectors. 50mA in connector No limit on number of polarities Generating and inserting tables PAT, PMT, CAT, SDT, BAT, NIT, TDT, TOT, EIT Yes (automatically generated) Yes (configurable input name) Yes Versatile transmodulation of DVB-T/T, DVB-S/S and DVB-C channels to DVB-T/DVB-C channels. The HTI-0 module can receive DVB-T/T, DVB-S/S or DVB-C muxes and broadcasts them in DVB-T or DVB-C output channels. One module acts as the master to ensure the configuration (remote or local through PC) is carried out at the complete headend level, through the IKUNET bus and not module by module. It allows a future increase in services to be foreseen in order for the televisions to have them already on their lists, avoiding the need for retuning. It allows a video service to be sent with several different languages without taking up more space than that corresponding to an RF channel. The television shows a programme for each language, avoiding the need for users to have to choose their language on the television remote control. It is compatible with the PC application: IKUSI HEADEND DISCOVERY This instrument provides installers with a tool that allows them to detect the headend s modules without having to modify the PC s network configuration. (This can be downloaded from It allows channel lineups to be created and managed remotely, ensuring that the lineup is completely customisable without having to work in-situ. The four DVB-T/C output channels can be distributed onto any part of the band. Total control of the multiswitch. Fitted with DiSEqC. Cloned services Outputs Number of outputs Yes, from any input to any output channels DVB-T / DVB-C (7-86 MHz) MER db > 0 Output level dbµv 85 Maximum output bit rate DVB-T Mbps.7 Operation modes DVB-T K / 8K Output bandwidth DVB-T MHz 6 / 7 / 8 Modulation formats DVB-C 6 QAM / QAM / 6 QAM /8 QAM / 56 QAM Maximum output bit rate DVB-C Mbps 5 Adjustable output level db -5 Symbol rate DVB-C MS/s Output loop-through loss db. General Configuration Management interface PC. Interface web Ikusi Headend Discovery (v.8.5) USB.0 Host frontal Supply voltage VDC + Operating temperature ºC Consumption A 0.67 Dimensions mm 0 x 95 x [58] CATALOGUE Ikusi Multimedia

4 FREQUENCY RANGE SAT: MHz TERR: 5-86 MHz Act Link Act Link Act Link OUTPUT TEST OUTPUT GAIN EXT INPUT INPUT INPUT TEST -0 db Gain 6 db -0 db Coming Soon! New Transmodulator 0 HTI- Input DVB-T/T DVB-S/S DVB-C Quad transmodulator MSS-05 Ref. 65 Stand Alone Multiswitch (5 in- out) IP output Double Common Interface Ethernet connector CAM CAM CAM CAM CAM CAM Output DVB-T DVB-C IP input + loop or inputs IP Multicast, IP Unicast PSU-50 HTI- HTI- HTI- HTA-5 Multistream supported

5 HTI HEADEND Power supply PSU-50 REF. 865 Regulation type switched-mode Mains supply voltage (50/60 Hz) VAC 00-0 Output voltage V + Max current A 6.5 Efficiency % > 89 Operating temperature ºC Mains lead Class I IEC 0/C (not included) Dimensions mm 0 x 90 x The PSU-50 power supply has the capacity to deliver power to the most demanding HTI headend configuration. The current distribution is done through the BACK-500 base plate, without plug bridges. The power supply can be istalled in any position of the BACK-500 base plate, except in the slot reserved to the master device (second slot) Morever, its design allows to use the power supply in installations with power supplies, working in redundant way. Power amplifier HTA-5 REF. 868 Bandwidth MHz 7-86 Gain db 5 Interstage variable attenuator db 0-0 Noise figure db 6 Output level (IMD -60dB, DIN 500B) db 5 Output level (IMD -60dB, EN 5008-) dbµv 0 Input test dbµv -0 ±.5 Output test db -0 ± Extension input Bandwidth MHz 7-86 Gain db 6 Supply voltage VDC + Consumption ma 50 Amplification of the signal generated by a headend of HTI modules. Additionally, the HTA-5 has an extension input that facilitates coupling of the signal provided by another existing headend. Operating temperature ºC RF and Test connectors Female F Dimensions mm 0 x 95 x [60] CATALOGUE Ikusi Multimedia

6 HTI HEADEND Base-plate for HTI Headend BACK-500 REF. 866 The BACK-500 base-plate allows to fix mechanically the HTI product range modules, to distribute the supply lines and to communicate the different modules that are inserted in the headend. The base-plate is formed by two parts:. Backplane. USB bridge The backplane is in charge of fixing the modules, distributing the power supply and carrying the communication lines towards the USB bridge. The USB bridge in in charge of connection all the modules that are inserted in the base-plate with the master module. Interconnected base-plate, does not need alimentation bridges between modules. The base-plate can be fixed to the wall or in a rack frame by means SR-HTI of fixing accessories (joining base-plates. 0 Fitting modules in the base-plate Base-plate BACK-500. Backplane. USB bridge Grounding connection Horizontal joining of two BACK-500 base-plates A Assembly detail base base A Ikusi Multimedia CATALOGUE [6]

7 FREQUENCY RANGE SAT: MHz TERR: 5-86 MHz OUTPUT TEST OUTPUT GAIN EXT INPUT INPUT INPUT TEST -0 db Gain 6 db -0 db HTI HEADEND USB-Ethernet adapter for local or remote control MSS-05 Ref. 65 Stand Alone Multiswitch (5 in- out) USB-00 REF. 8 Connectivity Device Interfaces RJ-5 Ethernet Port (0/00/000 Mbps) USB Type A Connector LEDs Speed (orange) Link/ACT (green) Standards General Minimum System Requirements Power Management Physical USB Specification Version.0 USB Specification Version.0 USB Specification Version. USB Specification Version.0 OHCI (Open Host Controller Interface) Operating system: Microsoft Windows 8/7/ Vista/XP SP EHCI (Enhanced Host Controller Interface) IEEE 80. Ethernet IEEE 80.u 00BASE-T, TX, and T compatible Supports suspended mode and remote wakeup Supports full and half duplex in gigabit Ethernet mode Mac OS 0.6 to 0.8 Linux kernel.6.x or above Advanced Power Management reduces power usage during idle or light traffic periods Power Input: Bus-powered 500 ma, 5 V DC Consumption: 50 ma,. V DC Temperature Operating: 0 to 5 C ( to F) Storage: -0 to 70 C (- to 58 F) Humidity Operating: 0% to 90% non-condensing Storage: 5% to 90% non-condensing Dimensions Weight 7. x x 6 mm (.9 x 0.8 x.06 inches) 6. grams (.6 oz) Certifications CE FCC PSU-50 HTI-0 HTI-0 HTI-0 HTA-5 USB-00 USB-Ethernet adapter [6] CATALOGUE Ikusi Multimedia

8 PSU-50 HTI-0 HTI-0 LOOP OUT +VAUX CAM HTL-STC IN IN 0/00 Link/Act 0/00 Link/Act IN OUT POWER +V +8V 00 ma ( KHz) +V 00 ma ( KHz) +8V 00 ma +V 00 ma I TOT max :700 ma +V 9A HTI HEADEND Support to install the headend in a 9 rack SR-HTI REF. 867 Number of supports units Handles plastic units Material Galvanized sheet Dimensions 6,5 x 0 cm 0 Application example SR-HTI SR-HTI BACK-500 rear view front view Rack 9 fixing for two base-plates (BACK-500) headend installation Complete assembly of the rack Special Accessories HTI modules ClassA modules REF. DESCRIPTION ADA-HTI 85 Special bridges, to install ClassA modules in the HTI base-plate (BACK-500) CFP-900 Z plug bridge Power supply bridge special bridges Ikusi Multimedia CATALOGUE [6]