Model AK-HCU931P. Camera Control Unit. Before attempting to connect, operate or adjust this product, please read these instructions completely.

Transcription

1 PE SHRT 0V A MAI HEAD PWER SYSTEM PRIVATE MIC PTT PUSH Camera Control Unt Camera Control Unt Model AK-HCU9P V A CABLE TALLY/CALL LEVEL PGM PGM PGM Before attemptng to connect, operate or adust ths product, please read these nstructons completely.

2 Safety precautons CAUTI RISK F ELECTRIC SHCK D T PE CAUTI: T REDUCE THE RISK F ELECTRIC SHCK, D T REMVE CVER (R BACK). USER SERVICEABLE PARTS ISIDE. REFER T SERVICIG T QUALIFIED SERVICE PERSEL. The lghtnng flash wth arrowhead symbol, wthn an equlateral trangle, s ntended to alert the user to the presence of unnsulated dangerous voltage wthn the product s enclosure that may be of suffcent magntude to consttute a rsk of electrc shock to persons. The exclamaton pont wthn an equlateral trangle s ntended to alert the user to the presence of mportant operatng and mantenance (servce) nstructons n the lterature accompanyng the applance. FCC ote: Ths devce comples wth Part of the FCC Rules. To assure contnued complance follow the attached nstallaton nstructons and do not make any unauthorzed modfcatons. Ths equpment has been tested and found to comply wth the lmts for a class A dgtal devce, pursuant to Part of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference when the equpment s operated n a commercal envronment. Ths equpment generates, uses, and can radate rado frequency energy and, f not nstalled and used n accordance wth the nstructon manual, may cause harmful nterference to rado communcatons. peraton of ths equpment n a resdental area s lkely to cause harmful nterference n whch case the user wll be requred to correct the nterference at hs own expense. WARIG: T REDUCE THE RISK F FIRE R SHCK HAZARD, D T EXPSE THIS EQUIP- MET T RAI R MISTURE. CAUTI: T REDUCE THE RISK F FIRE R SHCK HAZARD AD AYIG ITERFERECE, USE THE RECMMEDED ACCESSRIES LY. For CAADA Ths class A dgtal apparatus comples wth Canadan ICES-00. Cet apparel numérque de la classe A est conforme à la norme MB-00 du Canada. CAUTI: Invsble Laser radaton s emtted from the ptcal fber connector when ths product s turned on. Don t look nto drectly nto the ptcal fber connector of ths product. CAUTI: Ths product uses a semconductor laser system and s a laser class product comples wth Radaton Performance Standards, CFR SUB- CHAPTER J. Use of controls or adustments or performance of procedures other than those specfed heren may result n hazardous radaton exposure. Don t make any modfcatons. Don t repar by yourself. Refer servcng to qualfed personnel. ndcates safety nformaton.

3 Contents Safety precautons vervew Accessores peratng precautons Parts and ther functons Connectons External dmenson drawng Specfcatons vervew By connectng ths unt to the mult-format camera (model AK-HC9P), mult-format mages can be nput and output. (Some of the functons are avalable as optons.) The unt s connected to the mult-format camera, and t s connected to the remote operaton panel (RP) and master setup unt (MSU) usng dedcated mult-purpose cables (avalable as optonal accessores). When the desgnated mult-purpose cables are used, the dstance between from the CCU to the RP and MSU can be extended up to 0 meters. Accessores Rack-mountng adapters (k) Mountng screws (Mk mm) (k) BC termnaton resstor (k) Communcaton connector (k) Power cord (k) peratng precautons Handle the unt carefully. Droppng the unt or subectng t to strong mpact may cause malfunctonng and/or accdents. perate the unt wthn a temperature range of of to 0oF (0oC to 0oC). peraton n locatons below of or above 0oF may adversely affect the nternal parts. Be absolutely sure to turn off the power before connectng or dsconnectng the cables. Do not use the unt outdoors. Install the unt at a dstance of at least. ft ( meter) from the montor. Mantenance Dsconnect the power plug, and wpe the unt wth a dry cloth. To remove stubborn drt, soak a cloth n dluted ktchen detergent and wrng t out well, and then wpe the unt gently. Cauton Avod usng benzne, pant thnners or other volatle substances. If a chemcally treated cloth s to be used, read the precautons for ts use carefully.

4 Parts and ther functons $ Camera control unt front panel CABLE PE SHRT V A 9 MAI 0V A HEAD PWER LEVEL SYSTEM PRIVATE MIC PTT : ; < = >? TALLY/CALL PGM PGM PUSH Camera Control Unt CCU power swtch [MAI] Ths s the power swtch of the camera control unt (CCU). The CCU, RP and other unts wll not operate unless ths swtch s set to. Up: Down: Camera power swtch [HEAD PWER] Ths swtch supples power to the camera. However, f the RP has been connected, power s suppled to the camera only when ths swtch and the camera power swtch on the TP are both set to. Up: Down: CCU power LED Lghted: The CCU power s. ff: The CCU power s. Camera power LED Lghted: Ths ndcates that power s beng suppled from the CCU to the camera. ff: Ths ndcates that power s not beng suppled from the CCU to the camera. Even f the camera power swtch s, ths LED remans off f no power s suppled to the camera. Ths s due to one of the followng reasons: the supply of power to the camera has been turned off by the RP, one of the optcal fber cables has been dsconnected or somethng s wrong wth the camera, and the power supply was turned off. CCU power fuse Ths s the CCU man power fuse. Camera head power fuse Ths s the camera head power supply fuse. Alarm LED [] Lghted: Ths LED ndcates that the CCU s fan has stopped and that somethng s wrong wth the power supply. ff: ormal If the LED remans lghted, turn off the man power and have the unt repared. Camera cable open alarm LED [CABLE / PE] Lghted: The cable between the CCU and camera has been dsconnected. ff: ormal 9 Camera cable short-crcut alarm LED [CABLE / SHRT] Lghted: The cable between the CCU and the camera has short-crcuted. ff: ormal : TALLY ndcator/call swtch [TALLY/CALL] Ths ndcator lghts when the R/G tally sgnal s nput. It s also a CALL swtch for callng the camera, RP and MSU. ; ICM volume control [LEVEL] Ths s used to adust the standby ICM volume. < ICM PGM selector swtch Ths s used to select the PGM nput sgnals whch are to be mxed wth the standby ICM. = ICM PGM level control [PGM] Ths s used to select the level of the PGM sgnals whch are to be mxed wth the standby ICM. > ICM selector swtch Ths s used to select the call party of the standby ICM. PRIVATE: For makng prvate calls to the camera. CMM: For connectng the standby ICM wth the system ICM.? ICM MIC selector swtch [MIC] : The ICM mcrophone s set to. : The ICM mcrophone s set to. PTT: The ICM mcrophone s set to only whle the ICM MIC selector swtch s held Standby ICM ack Ths s connected to ICM lne, and t enables calls to be made to the camera s ICM lne. Even when the camera power s, calls can stll be made to the camera s ICM lne.

5 Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] P Q R S T U Y A ptcal fber connector FXW.K.9C.CLM made by LEM Pn o. Functon Polarty Sgnal flow Cable color E TV dgtal return vdeo,,, nput connectors [TV DIGITAL RET,,, ] These connectors are for nputtng the return vdeo sgnals of the TV seral dgtal nterface. ptcal fber CAM#CCU Yellow (0) ptcal fber CCU#CAM Yellow (0) Control wre, hot CAM,.CCU Black Control wre, cold CAM,.CCU Red AC 0 V lve CCU#CAM range AC 0 V neutral CCU#CAM Whte B TV dgtal return vdeo,,, nput connectors [ DIGITAL RET,,, ] (pton) These connectors (BC) are for nputtng the return vdeo sgnals of the TV seral dgtal nterface. C TV dgtal vdeo,,, output connectors [ DIGITAL UT,,, ] (pton) These connectors (BC) are for outputtng the vdeo sgnals of the TV seral dgtal nterface. D TV analog component vdeo output connectors [TV AALG Y/G, Pb/B, Pr/R] (pton) The TV analog sgnals of the camera are output from these connectors (BC). G/B/R or Y/Pb/Pr vdeo sgnals can be selected by the master setup unt (MSU) or remote operaton panel (RP). TV PM output connector [PM] Ths s the TV PM output (Vp-p) connector. F TV D dgtal vdeo output connectors [TV DIGITAL UT D, ] These connectors are for outputtng the D format vdeo sgnals of the TV seral dgtal nterface. There are connectors (BC). G Analog return vdeo, nput connectors [AALG RET, ] These connectors (BC) are for nputtng the analog return vdeo sgnals. H PRMPT-I connectors [PRMPT,] These are the prompter sgnal nput connectors (BC). Input TV composte vdeo sgnals as the prompter sgnals. I TV waveform montor output connectors [TV WFM, ] These connectors (BC) are for outputtng the camera vdeo sgnals whch are to be dsplayed on the TV waveform montor. R G B SEQ RP/MSU montor selecton R G B TV WFM output RGB waveforms EC Composte vdeo

6 Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] P Q R S T U J TV pcture montor vdeo output connectors [PM, ] These connectors (BC) are for outputtng the vdeo sgnals whch are to be dsplayed on the TV pcture montor. R G B SEQ EC RP/MSU montor selecton TV PM output Ralarm dsplay Galarm dsplay Balarm dsplay Y and skn tone zebra pattern Composte vdeo K TV analog composte vdeo output connectors [TV VBS] These connectors (BC) are for outputtng the TV analog composte vdeo sgnals (wth sync) of the camera. L TV analog SYC output connector [ SYC] The TV analog sync sgnal of the camera s output from ths connector (BC). Its ampltude s +/-0. V (h termnaton). M TV analog SYC output connector [TV AALG SYC] The TV analog sync sgnal of the camera s output from ths connector (BC). Its ampltude s Vp-p (h termnaton). TV genlock nput connectors [ REF] These are the TV genlock nput connectors (BC). The brdgng connecton between the two connectors enables one to be used for nput purposes and the other for output purposes. Input the TV tr-level sync sgnal as the genlock sgnal. Y P ICM/tally connector [CMMUICATI] The external ICM or tally system s connected here. ICM/tally connector (KPT0E-9P made by Japan Avaton Electroncs Industry) Pn o. A B C D E F G H J K L M P R S T U V Functon Sheld ICM ICM ICM ICM ICM ICM ICM ICM PGM(H) PGM(C) PGM(H) PGM(C) C Red tally Green tally C C Tally common PGM output level: 0 dbm/00h ICM level: 0 dbm/00h Polarty Sgnal flow CCU#SYSTEM CCU#SYSTEM SYSTEM#CCU SYSTEM#CCU CCU#SYSTEM CCU#SYSTEM SYSTEM#CCU SYSTEM#CCU SYSTEM#CCU SYSTEM#CCU SYSTEM#CCU SYSTEM#CCU Contact Contact TV genlock nput connectors [TV REF] These are the TV genlock nput connectors (BC). The brdgng connecton between the two connectors enables one to be used for nput purposes and the other for output purposes. Input the BB vdeo sgnal as the genlock sgnal.

7 Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] Q RTS nput connector [RTS I] The RTS system s connected to ths connector. The mcrophone level s dbm/00h. RTS nput connector (HAPRK-S made by Hrose) Pn o. Pn o. P Q R S T U Functon Common Channel (DC) Channel Functon Common Channel (DC) Channel Polarty Polarty Sgnal flow R RTS output connector [RTS UT] The unt s connected to the RTS system from ths connector. The mcrophone level s dbm/00h. RTS output connector (HARD-P made by Hrose) Sgnal flow Y V TRUK connector [TRUK] Ths connector enables two sets of RS- data to be transmtted. Pn o. 9 Functon TX () TRUK number TRK TX () TRK RX () TRK 0 RX () TRK RTS () RTS () CTS () CTS () TRK TRK TRK TRK Sgnal flow CAM#CCU 0 CCU#CAM 0 CAM#CCU CCU#CAM S T Mc, output connectors [MIC UT CH-, CH-] These are the mcrophone analog output connectors of the camera. The mcrophone level s 0 dbm/00h. Mc output connector (HARD-P made by Hrose) Pn o. Functon Sheld Hot Cold Polarty U Dgtal audo output connector [DIGITAL AUDI] Ths s the camera mcrophone and output connector (BC) for AES/EBU dgtal audo nterface specfcatons. Sgnal flow CCU#SYSTEM CCU#SYSTEM

8 Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] P Q R S T U W Waveform montor control connector [WFM CTL] Ths connector s used for controllng the waveform montor. Snce the nterface s dfferent, frst check the WFM settng on the SYSTEM menu of the RP or MSU before connectng the waveform montor. Waveform montor control connector (AB-9S made by Hrose) Pn o. Sgnal STAIRCASE RGB EABLE THREE LIE R FIELD Functon used by TV 0 V output/nput channel swtchng TTL level low when SEQ s selected by montor selector swtch on RP or MSU, for parade dsplay pen Functon used by TV V pull-up, 0 k TTL level low TTL level low when EC.SEQ s selected by montor selector swtch on RP or MSU Y X connector [] Ths connector s for establshng the down-converter mode from the external system by remote control. Sde panel, squeeze and letter-box are avalable as the down-converter modes. connector (AB-9S made by Hrose) Pn o. 9 Sgnal MDE MDE MDE MDE.C. TALLY R TALLY G TALLY CM Functon When shorted: : aspect rato When open: :9 aspect rato Refer to table below for the down converter mode. Contact Contact 9.C. ot connected ot connected CH CH CH pen pen pen TTL level low when G or SEQ s selected by montor selector swtch on RP or MSU TTL level low when B or SEQ s selected by montor selector swtch on RP or MSU TTL level low when R or SEQ s selected by montor selector swtch on RP or MSU.C. ot connected ot connected Down-converter mode MDE MDE LCAL Letter-box (LB) Squeeze (SQ) Sde panel (SP) PE MAKE PE MAKE PE PE MAKE MAKE

9 Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] P Q R S T U Y RP connector The remote operaton panel (RP) s connected to ths connector. RP connector (HR0A-0R-0S) Pn o. Functon Polarty Sgnal flow Y Z CSU/MS connector The camera selector unt (CSU) s connected to ths connector. CSU connector (HR0A-0R-0S made by Hrose) Pn o. Functon Polarty Sgnal flow RP CT (H) CCU#RP CSU CT (H) CCU#CSU RP CT (C) CCU#RP CSU CT (C) CCU#CSU RP DATA (H) RP#CCU CSU DATA (H) CSU#CCU RP DATA (C) RP#CCU CSU DATA (C) CSU#CCU PW REM/CD A CCU#RP TALLY R CCU#CSU ICMT/CD B CCU#RP TALLY G CCU#CSU ICMR/CD C CCU#RP HEAD PWER CCU#CSU ICMG/CD D CCU#RP CCU#CSU 9 V CCU#RP 9 0 CCU#CSU 0 0 [ Fan Ths dsspates the heat generated nsde the CCU to keep the unt cool. 9

10 CABLE PE SHRT V A MAI CABLE PE SHRT V A MAI 0V A HEAD PWER 0V A HEAD PWER LEVEL SYSTEM PRIVATE PTT LEVEL SYSTEM PRIVATE PTT TALLY/CALL PGM PGM PGM PUSH TALLY/CALL PGM PGM PGM PUSH Parts and ther functons $ Camera control unt rear panel A B C D [ RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT E F G H I IPUT I IPUT WFM WFM PM PM VBS VBS REF I J K L SYC M REF AC I CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL V W X RP Z \ ^ ] P Q R S T U \ Alarm connector [] Ths connector s for outputtng the alarm sgnals to the external system when any problem wth the supply voltage has occurred nsde the CCU or the CCU fan has stopped. When the power suppled to the AC fan or DC fan nsde the CCU has been shut down, pns and of ths connector are shorted. If power s suppled to the CCU and any of the DC power supples nsde the CCU fals to output the supply voltage, t means that pns and of ths connector are shorted. Alarm connector (RM-BRB-PH made by Hrose) Y ] AC nlet [AC I] AC 0 V, 0/0 Hz ^ Ground termnal [] Pn o. Functon PWER (H) PWER (L) FA (H) FA (L) $ How to swtch between 00 camera mode and 0p camera mode. Turn off the power of CCU.. Turn the knobs and remove the front panel.. Swtch the SW (MDE SW) on the Control board as follows: Knobs MIC Power swtch Front panel Camera Control Unt 0p camera The factory settng s 0p camera. 00 camera MIC. Install the front panel, and turn on the power to complete settng. Control board 0 SW (MDE SW)

11 A R AM G Y /C FILTER LCAL MI SEL CAM/VTR GAI W.BAL LW STBY SAVE HIGH PTT CAM B MID BAR A TEST PRST USER SEL B CARD PHAT AB PHAT AB (db) (db) MIC MIC RCP CCU PREVIEW 9 0 LIK CSU PWER DC I G D Connectons Connectons for system Dedcated RP cables (avalable as optonal accessores) are used to connect the CCU connector on the RP unt and the RP connector on the rear panel of the CCU (ths unt). After all the equpment has been connected, set the man power swtch on the CCU to. Then turn on the camera s power. <otes> When the camera s not connected, the functons that can be controlled by the RP and MSU are lmted to the CCU control tems. The camera power of the CCU must be turned off wthout fal before dsconnectng the camera or RP. dgtal (D) RET vdeo nputs (k) Man lne outputs (D k) Man lne outputs (VBS k) analog (VBS) RET vdeo nput (k) PRMPT sgnal nput (VBSk) The output unt (AK-H9P) s an optonal accessory. RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT I IPUT I IPUT WFM WFM PM PM VBS VBS REF REF AC I SYC CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL Handy camera (AK-HC9P) RP Tally nputs (R, G) ICM nput/output (EG, PRD) PGM nputs (PGM, PGM) SYC output for montor system RP cable MSU cable sync sgnal nput (black burst: BB) Vdeo Control Vdeo Handy camera + buld-up unt (AK-HBU9P) WFM pcture montor RP connector panel MSU connector panel

12 A R AM G Y /C FILTER LCAL MI SEL CAM/VTR GAI W.BAL LW STBY SAVE HIGH PTT CAM B MID BAR A TEST PRST USER SEL B CARD PHAT AB PHAT AB (db) (db) MIC MIC RCP CCU PREVIEW 9 0 LIK CSU PWER DC I G D Connectons Connectons for / system Dedcated RP cables (avalable as optonal accessores) are used to connect the CCU connector on the RP unt and the RP connector on the rear panel of the CCU (ths unt). After all the equpment has been connected, set the man power swtch on the CCU to. Then turn on the camera s power. <otes> When the camera s not connected, the functons that can be controlled by the RP and MSU are lmted to the CCU control tems. The camera power of the CCU must be turned off wthout fal before dsconnectng the camera or RP. To confgure the system, the output unt (AK-H9P), avalable as an optonal accessory, must be nstalled. dgtal RET vdeo nputs (k) Man lne dgtal outputs (k) ( output (UT) can be swtched to PM output) dgtal (D) RET vdeo nputs (k) Man lne outputs (Dk) Man lne outputs (VBSk) analog (VBS) RET vdeo nputs (k) Man lne analog output (k: Y, Pb, Pr/G, B, R) PRMPT sgnal nput (VBSk) Install the output unt (AK-H9P) whch s an optonal accessory. RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM I IPUT I RET RET UT UT UT UT RET RET PRMPT I IPUT I IPUT WFM WFM PM PM VBS VBS REF REF AC I SYC CMMUICATI I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL Handy camera (AK-HC9P) RP Tally nputs (R, G) ICM nput/output (EG, PRD) PGM nputs (PGM, PGM) SYC output for montor system SYC output for montor system RP cable MSU cable sync sgnal nput (black burst: BB) Decde on a vald REF nput sgnal usng the nternal swtch. Vdeo Control Vdeo sync sgnal nput (tr-level sync) Decde on a vald REF nput sgnal usng the nternal swtch. Handy camera + buld-up unt (AK-HBU9P) WFM pcture montor RP connector panel MSU connector panel

13 External dmenson drawng CMMUICATI 9 Camera Control Unt RP I PUSH RTS UT CH MIC UT CH DIGITAL AUDI TRUK WFM CTRL SYC AC I WFM WFM PM PM VBS VBS REF REF I IPUT I IPUT RET RET RET UT UT UT UT RET PRMPT I IPUT I RET RET RET UT UT UT UT/PM Y / G Pb / B Pr / R PM CABLE TALLY/CALL SHRT PE V A 0V A LEVEL PGM PGM PGM MAI HEAD PWER PUSH SYSTEM PRIVATE MIC PTT

14 Specfcatons Power supply: AC 0 V Power consumpton: 0 W (when unt s operated on ts own) ndcates safety nformaton. Vdeo nput/output sgnals dgtal sgnal (D) analog sgnal (VBS) dgtal sgnal (optonal) analog sgnal (Y, Pb, Pr/GBR): utput only (optonal) PRMPT sgnal (VBS): Input only Sync nput sgnals reference sgnal (tr-level sync) reference sgnal (BB) (Select one of these sgnals usng the nternal swtch.) Audo output sgnals Analog audo output (MIC, ) Dgtal audo output (MIC, ) Swtch functons Refer to Parts and ther functons (page ). peratng temperature range 0 to 0 C ( to 0 F) Storage temperature range 0 to 0 C ( to 0 F) peratng ambent humdty Less than % Weght Approx. 0.0 kg ( lbs) Dmensons (WkHkD) 0kk9 mm (excludng protrusons) (-9/k-/k-9/ nches) Rack mountng Attach the rack mountng adapter frmly by usng a crosshead screwdrver as follows: Mountng screws (k) Rack mountng adapter

15

16 PAASIC BRADCAST & TELEVISI SYSTEMS CMPAY UIT CMPAY F MATSUSHITA ELECTRIC CRPRATI F AMERICA Executve ffce: ne Panasonc Way E-, Secaucus, J 009 (0) -000 EASTER ZE: ne Panasonc Way E-, Secaucus, J 009 (0) - Southeast Regon: orthbrook Parkway, Ste -0, Suwanee, GA 00 (0) - Central Regon: 0 Randall Road E-C-, Elgn, IL 0 () -00 WESTER ZE: 0 Cahuenga Blvd W., Los Angeles, CA 900 () -00 Government Marketng Department: West Gude Drve, Rockvlle, MD 00 (0) -0 Broadcast PARTS IFRMATI & RDERIG: 9:00 a.m. :00 p.m. (EST) (00) -/ Hr. Fax (00) -0 Emergency after hour parts orders (00) - TECHICAL SUPPRT: Emergency Hour Servce (00) -0 Panasonc Canada Inc. 0 Ambler Drve, Mssssauga, ntaro LW T (90) -00 Panasonc de Mexco S.A. de C.V. Av angel Urraza um. 09 Col. de Valle 000 Mexco, D.F. () 9 Panasonc Sales Company Dvson of Matsushta Electrc of Puerto Rco Inc. San Gabrel Industral Park, th Infantry Ave., Km. 9., Carolna, Puerto Rco 000 () 0-00 Prnted n Japan VQT0A- P