MV-8 Series & MV-Flex Multiviewers Integrated and Standalone Options for Every Operation

Transcription

1 Datasheet MV-8 Series & MV-Flex Multiviewers Integrated and Standalone Options for Every Operation Grass Valley s multiviewer technology gives broadcasters the flexibility to work the way they want to work today, yet future-proof their operations for tomorrow. Multiviewers traditionally are used to monitor outputs and source material within a broadcast environment with some models offering extra monitoring features. However, as technology evolves so does the requirements for media organizations. Multiviewers from Grass Valley, a Belden Brand, are not just about monitoring outputs; our advanced technology enables the multiviewer range to perform: Integrated control and monitoring, providing unique system workflow views Intelligent monitoring by exception using Grass Valley s Orbit and Media Biometrics technology Support for IP, SDI and hybrid environments 4K UHD input/output support Simple configuration providing greater flexibility Grass Valley offers a comprehensive range of MV-Flex standalone and MV-8 series standalone, router integrated and IP multiv iewers to meet any, size of operation or architecture, whether that s in a traditional SDI, IP or hybrid environment. Intelligent monitoring by exception using Media Biometrics and RollCall The integrated advanced control and monitoring technology within Grass Valley s MV-8 series and MV-Flex multiviewers gives users complete confidence in their broadcast. By adopting Media Biometric technology within the multiviewer, all media assets can be assigned unique signatures which automatically identifies and verifies anything out of the norm and reports via RollCall making for a streamlined and more efficient workflow. Support for IP, SDI and hybrid environments The multiviewer family fully supports independent environments where standards are the same throughout the broadcast workflow. However, in a mixed environment such as SDI and IP, the multiviewer family can service any sources incoming and outputting the multiviewers making a hybrid solution possible and significantly effortless. This makes for easier interfacing with other equipment such as routers and switchers stress-free. Simple configuration provides greater flexibility By designing a configurator tool within the MV-8 Series and MV-Flex multiviewer family to be simple to use, you have the flexibility to work quickly in dynamic environments. Being able to repurpose the multiviewer for different s gives greater flexibility for operators enabling them to meet the needs of technical directors and concentrate on more problematic areas. 4K UHD input/output support 4K UHD broadcasting is proving a value-added requirement and image quality is absolutely necessary in this environment. Media organizations are having to create more compelling content and deliver more immersive viewing experiences experience you should monitor at their best. 1

2 KEY FEATURES Live Production Multiple quad splits plus multitile screen layouts (12x HD to 3x 4K UHD outputs) UMD and tallies from routing, switchers and third-party controllers Integration with third-party tally systems Dynamic and static UMDs Clock/timers Transmission Multichannel monitoring and exception alarming for early detection of errors With the Sirius 800 Multiviewer and Sirius 800 Advanced Hybrid Processing (AHP), a common operator control interface for AHP and the multiviewer allows an operator to rearrange or adjust audio tracks Playout Multichannel monitoring of video and audio Closed caption and subtitle status Configurable alarms and alerts on failure Customize display by adding channel logos, labels, clocks (with configurable offsets) Display automation playlists, monitor opt-out feeds, etc. MV-8 Series and MV-Flex Multiviewers Boxed MV-820-HDBNC MV-820-IP MV G Boxed/ Standalone Router Integrated Router Integrated MV-800 MV-850 MV-840 MV-830 Software MV-805 MV MV MV Software H Mb/s Max Grass Valley MV-8 Series & MV-Flex Multiviewers Modular Modular MV-Flex IQMV00 MV-800-DT Desktop Multiviewer MV-8 Series The MV-8 series consists of standalone, router integrated and IP multiviewers, giving you the opportunity to maximize your monitoring broadcast workflow whatever platform you choose. The MV-8 series offers complementary features that give you rewarding benefits to fully enhance your monitoring systems such as SD/HD/3G/4K UHD and IP I/O, full audio and video monitoring, alarm systems, dedicated router connectivity and a full biometric signature generation for cutting-edge sophisticated monitoring. The MV-8 series multiviewers have been designed to simplify your workflow and give you the best quality image display with a feature set that surpasses any other multiviewer in the market. Simple and intuitive configuration with the additional benefit of full control and monitoring capability for your entire system. The MV-8 Series offers multiple packages and integration options. Each hardware model in the range has the same core features: 48 inputs x 4 outputs Output upgradable to 12x 3G and 4K UHD SD/HD/3G/4K UHD quad link inputs Integrated control & monitoring H.264 streamed copies of the inputs for use with the MV-800-DT Desktop and Software Models MV-800-DT (Desktop) A unique addition to the capability of all MV-8 series multiviewers is the MV-800-DT. This feature utilizes the input streaming capability of the units by allowing the expansion of your system with independent multiviewer heads. Each instance of the DT software can create an independent multiviewer layout using the SD H.264 streams available from an MV-8 Series multiviewer in your system. MV-805 The MV-805 is a software-based IP multiviewer that runs on (COTS) commodity-off-the-shelf hardware for convenience. Designed to complement the capability of the MV-820-IP as a software-only solution, these systems can offer multiple configurations. MV IP multiviewer available as a turnkey solution in a 1 RU server using dual 100 GbE NIC cards. Supports SMPTE ST /7 and TR03/04. Providing 32 input streams on eight multiviewer streaming output heads. MV IP multiviewer available as a turnkey solution in a 1 RU server using a single 100 GbE NIC card. Supports SMPTE ST /7 and TR03/04. Providing 16 input streams over four multiviewer streaming outputs. MV IP multiviewer available as a software-only solution. Supports SMPTE ST /7 and TR03/04. Simple software-based quad split. 2

3 Sirius 840 Sirius 840 Sirius 840 MV-8 Series & MV-Flex Multiviewers Integrated and Standalone Options for Every Operation Router Integrated Models MV-800 Uses dedicated MV slots in the Sirius 830/840/850 frames. Ideal for lower-density s with a maximum of two or three modules per routing frame. Two modules maximum in Sirius 830/Sirius 850 frames. Three modules maximum in Sirius 840 frames. MV-850/840 Router integrated Sirius 840/850 frames only. Requires two output slots per module. Maximum of 12 modules per frame. Supports 48 router outputs in addition to multiviewer functionality. Ideal for high-density monitoring s, providing monitoring for up to 576 sources over 144 multiviewer heads. MV-830 Router integrated Sirius 830 frames only. Requires one input and one output slot per module. Maximum of 12 modules per frame. Supports 24 router inputs and 24 router outputs in addition to multiviewer functionality. Ideal for high-density monitoring s, providing monitoring for up to 288 sources and 288 destinations over 144 multiviewer heads. Standalone 2 RU Models MV-820 The MV-820 is a standalone 2 RU multiviewer offering high-density monitoring in a compact design. The MV-820 is an ideal solution for s such as houses of worship, conferences and events, outside broadcast and on-the-road flyaway packs. With its compact design, simple configuration and high-density I/O, the MV-820 is the only multiviewer on the market to offer 48 inputs x 12 outputs in such a small mainframe. MV-820-IP The MV-820-IP takes all of the capability of the SDI MV-820 models and brings this to the uncompressed IP world, with support for SMPTE ST /7 and TR03/04. This is highly dense solution for IP infrastructures. Using 100 GbE redundant ports the system offers monitoring for 48 uncompressed IP streams. In addition to the baseband multiviewer outputs, the MV-820-IP also offers IP streaming heads. MV G Finally in the MV-820 line up we can offer the MV G. In addition to the full multiviewer and monitoring capability of the MV-820, the MV G offers additional 48x48 routing capability, providing a compact and versatile routing and monitoring solution in a 2 RU package. Example Architecture (4K display uses quad link) Standard outputs 1-4 3G SDI or fiber Option outputs MV inputs 1-48 MV-820 Outputs 1-4 Outputs 5-12 H.264 Streaming MV sources 1-48 MV-800 Desktop DT 1 MV-800-DT (1) H.264 Streaming MV sources from other systems MV-800-DT (X) DT X Providing a simple architecture, multiple MV-8 series units can be combined to provide system-wide monitoring. To complement primary monitoring, the MV-800-DT allows for the creation of custom screens using sources from any MV-8 series multiviewers in the system. 3

4 MV Flex The MV-Flex is designed as a flexible, cost-effective solution for multiimage displays. It is a standalone system that allows the configuration of multiple multiviewer systems within a single frame. Available in 1 RU and 3 RU chassis, it is possible to build multiple or single multiviewer instances by selecting from any of the input and output cards. The MV-Flex range now supports 4K UHD inputs (quad link) and outputs (HDMI 2.0) and the video input density has been doubled with the introduction of the new VIP4 8-input video processing card. From simple quad split to a 36 4K UHD multiviewer, the MV-Flex has the flexibility to cover any. With a 1 RU MV-Flex frame it is now possible to have a 32x32 router with two 16-channel multiviewers, providing an ideal solution for small, flyaway or SNG s. 72 inputs using the VIP3 inputs cards, increases to 144 with the addition of the new VIP4 8-channel input cards Simple configuration 1 RU or 3 RU frame Build multiple multiviewer systems in a single frame. Using dual-channel output cards and multiple input cards Up to 48 source inputs Up to 144 3G or 36 4K UHD quad link inputs in a single system Video: SDI, analog, HDMI, fiber Audio: AES, analog, balanced/unbalanced Additional routing capability (1 RU only) Extensive alarm capability: Video Audio Data Control Integration Grass Valley multiviewers integrate with many Grass Valley routing and switcher products. This allows tallies from router and switcher controllers simultaneously, meaning that all routing hangs on either system are correctly indicated. If timelines are used, the original source name is displayed, not just the source on the local router. Custom alarms can be triggered on screen, with configured text and text box colors, driven from RollCall or other third-party s, providing system level alarms on the multiviewer outputs. 4

5 MV-800 Integrated Multiviewer and Optional Desktop Software A fully featured integrated multiviewer for the Sirius 800 router series with optional MV-800-DT desktop multiviewer software. The MV-800 multiviewer benefits from worldclass image processing and scaling that provides an unmatched feature set and unique independent output routing facility, as well as input H.264 source streaming and unlimited output expansion capability with the MV-800-DT. Benefits Powerful processing capability at a very low cost Smaller form factor for saving space Simple configuration using dedicated configuration Flexible control options User upgradable Applications The MV-800 integrated multiviewer is ideal for use in any that benefits from a single or multiple display(s): Playout control rooms Studio galleries OB trucks Post production suites Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary multiviewer outputs. MV-800 high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence Up to 3 modules per routing frame See the ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV-800 integrated multiviewer, we can offer some unique, powerful features included integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV-800 and MV-800-DT executes within a broadcast workflow. Multichannel Monitoring The MV-800 and MV-800-DT provide high-quality images even when used in advanced multichannel displays. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On-screen clock with regional time offsets KEY FEATURES Superior density 48 inputs to 12 outputs 4 standard outputs 5-12 optional license World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options Mix HD, 3G & 4K UHD sources on HD, 3G and 4K UHD displays simultaneously AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration For higher density s, additional MV capability can be added using the MV-850 populated in the output slots of the routing frame for Sirius 850 and Sirius 840 MV-800 Connectivity MV Outputs 1 12 Dual SFP (fiber or SDI) HDMI (future use) Dual USB GPI LTC Interface 1 GbE Control Port 10 GbE (future use) Redundant control port 5

6 SPECIFICATIONS Inputs 48 (from router) SD 525/59.94 & 625/50 HD 720p (50, 59.94, 60 frames) HD 1080i (25, & 30 frames) 3G 1080p (50, & 60 frames) 4K UHD quad link (uses 4 inputs per 4K UHD source) IP support via Sirius 800 IP router inputs Outputs 4 video outputs (coax or fiber) (upgradable to 12): 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the MV-800-DT desktop multiviewer On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output): Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed caption & subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge from hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered with a Router When ordered as part of a Sirius 800 system, the part number for the system will include the necessary MV-800 parts. Ordered as Individual Parts When ordered as separate parts, the order codes shown are needed to build a complete system. Order Quantities Maximum modules per router frame: Sirius 830: 2 modules Sirius 840: 3 modules Sirius 850: 2 modules 5902 Sirius 800 series multiviewer crosspoint Only one required per Sirius routing frame MV-800 MV-800 integrated multiviewer module, including 4 output license Additional licenses required to enable outputs Maximum of 2 cards per frame MV-800-RP MV800 Multiviewer rear panel With SFP output cages which will accept coaxial (HD-BNC) or fiber SFP modules. SFP ordered separately MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP1112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module Output expansion modules 24 Channel standard video output cards (24 cards total) Crosspoints x 4 Redundant crosspoints MV-800 Multiviewer slot MV-800 Multiviewer slot Multiviewer crosspoint ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 desktop multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat 24 Ch input cards Crosspoints x 4 24 Ch input cards Redundant crosspoints MV-850 MV5 48 Standard video outputs MV-850 MV1 48 Standard video outputs Sirius 850 frame 6

7 MV-805 Software-based IP Multiviewer A fully featured software-based multiviewer for IP in and IP out s. The MV-805 multiviewer benefits from worldclass image processing and scaling with an unmatched feature set. Benefits Software-based IP multiviewer for uncompressed video standards (VSF TR-04, TR-03, SMPTE ST /7, SMPTE ST 2110) Powerful processing capability at a very low cost Simple configuration using dedicated configuration Flexible control options (Grass Valley IP routing controller or Grass Valley IQ TIC control) Smaller form factor for saving space User upgradable Applications The MV-805 multiviewer is ideal for any that benefits from a single or multiple displays: Playout control rooms Studio galleries OB trucks Post production suites Variants MV x 3G inputs 8x 3G outputs MV x 3G inputs 4x 3G outputs MV x 3G inputs 1x 3G outputs Advanced Monitoring Capability With advanced technology development, the MV-805 multiviewer offers a unique, powerful feature set, including integrated control and monitoring. Multichannel Monitoring The MV-805 provides high-quality uncompressed images even when used in advanced multichannel displays: Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On-screen clock with regional time offsets KEY FEATURES World-class image processing and scaling Up to 16 channels of audio metering per source Internal and external UMD and tally support Integrated control and monitoring of system wide external devices as well as internal video and audio sources Clock and timers Audio and video alarm support Multiple display wall control Mix HD & 3G sources on 3G or 4K UHD displays Full RollCall integration Timing and synchronization provided by IEEE-1588v2 (PTP), compliant with SMPTE ST Enabled with 25/50/100 GbE for futureproofing Control and monitoring screen customization Unlimited source labeling MV-805 Connectivity Dual Port NIC (100 GbE) 1 GbE Control Ports Dual USB Dual Redundant PSU 7

8 SPECIFICATIONS Inputs Multiple standard types available for each IP input including: Uncompressed video transport using either SMPTE ST /30 or SMPTE ST /7encapsulation PCM audio using TR-03 & AES67 Outputs Multiple standard types available for each IP output including: Uncompressed video transport using either SMPTE ST /30 or SMPTE ST /7 encapsulation PCM audio using TR-03 & AES6 SMPTE ST 291 metadata support via IETF standard RTP Payload for Ancillary Data Ethernet Signal QSFP28 4x 100 GbE NIC ports on MV x 100 GbE NIC ports on MV IEEE 802.3by 100 GbE over fiber On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (any scaled source can be duplicated in any position on any output) MV has 32 unique scalers MV has 16 unique scalers MV has 4 unique scalers Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 32 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds Metering of AES67 audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Supported Alarms AC3 Lost Dialnorm Under Dolby E Configuration Changed Dolby E Lost PCM Lost Network A Lost Network B Lost Network Skew Video Black Video Freeze Video Input Format Change Video Input Lost Future Alarms In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Loss of CC Loss of VITC data Loss of embedded channels Status Indicators Input standard Source ID Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge from hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING MV MV Software IP Multiviewer Turnkey solution MV MV Software IP Multiviewer Turnkey solution MV MV Software IP Multiviewer Hardware requirements available on request 8

9 MV-850 and MV-840 Integrated Multiviewer and Optional Desktop Software Fully featured integrated multiviewers for the Sirius 850 and Sirius 840 routers with optional MV-800-DT desktop multiviewer software. The MV-850 and MV-840 populate two output slots in the routing frame, and offer 48 router outputs, maintaining the routing capability of the slots and offering true destination monitoring. The MV-850 and MV-840 multiviewers benefit from world-class image processing and scaling that provides an unmatched feature set and unique independent output routing facility, as well as input H.264 source streaming and unlimited output expansion capability with the MV-800-DT. Benefits Powerful processing capability at a very low cost Smaller form factor for saving space Simple configuration using dedicated configuration Flexible control options User upgradeable Applications The MV-850 and MV-840 integrated multiviewers are ideal for use in any that benefits from a single or multiple display(s): Playout control rooms Studio galleries OB trucks Post production suites Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary multiviewer outputs. MV-850 and MV-840 high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence Up to 3 modules per routing frame See ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV-850 and MV-840 integrated multiviewer, we can offer some unique, powerful features included integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV-850, MV-840 and MV-800-DT executes within a broadcast workflow. Multichannel Monitoring The MV-850, MV-840 and MV-800-DT provide high-quality images even when used in advanced multichannel display. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On screen clock with regional time offsets KEY FEATURES Superior density 48 multiviewer inputs to 12 multiviewer outputs 4 standard outputs 5-12 optional license 48 router outputs per card (the MV-850 and MV-840 uses two routing output slots while maintaining 48 routing outputs) World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options Mix HD, 3G & 4K UHD sources on HD, 3G and 4K UHD displays simultaneously AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration Maximum 12 MV-850 and MV-840 modules per Sirius 850 or Sirius 840 frame Additional MV capability can be added using the MV-800 populated in the dedicated multiviewer slots of the frame Densishield interfacing for dual frame expansion (Sirius 850 only) Router o/ps Densishield interfacing for dual frame expansion (Sirius 850 only) Router o/ps 1-24 MV-850-RP Connectivity Redundant control port 1 GbE control port Dual USB HDMI (future use) GPI LTC Interface MV Outputs 1-12 Dual SFP (fiber or SDI) 9

10 SPECIFICATIONS Inputs 48 (from router) SD 525/59.94 & 625/50 HD 720p (50, 59.94, 60 frames) HD 1080i (25, & 30 frames) 3G 1080p (50, & 60 frames) 4K UHD quad link (uses 4 inputs per 4K source) IP support via Sirius 800 IP router inputs Outputs 4 video outputs (coax or fiber) (upgradable to 12) 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the Grass Valley desktop multiviewer the MV-800-DT 48 router outputs providing true destination monitoring. Multiviewer inputs mapped 1:1 to router outputs On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output) Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed Caption & Subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge from hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered with a Router When ordered as part of a Sirius 800 system, the part number for the system will include the necessary MV-8 parts Ordered as Individual Parts When ordered as separate parts, the order codes shown are needed to build a complete system Order Quantities Maximum modules per router frame: Sirius 840: 12 modules Sirius 850: 12 modules MV-850 MV-850 Integrated Multiviewer Module, including 4-output license Additional licenses required to enable outputs Maximum of 12 cards per frame MV-850-RP MV850 Multiviewer Rear Panel With SFP output cages which will accept coaxial (HD-BNC) or fiber SFP modules. SFP ordered separately. Module includes 48 HD-BNC router outputs MV-840 MV-840 Integrated Multiviewer Module, including 4-output license Additional licenses required to enable outputs Maximum of 12 cards per frame MV-840-RP MV840 Multiviewer rear panel With SFP output cages which will accept coaxial (HD-BNC) or fiber SFP modules. SFP ordered separately. Module includes 48 HD-BNC router outputs MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 Desktop Multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat 24 Ch input cards Output expansion modules 24 Channel standard video output cards (24 cards total) Crosspoints x 4 Redundant crosspoints MV-800 Multiviewer slot MV-800 Multiviewer slot Multiviewer crosspoint Crosspoints x 4 Redundant crosspoints MV-850 MV5 48 Standard video outputs 24 Ch input cards MV-850 MV1 48 Standard video outputs Maximum of 12 modules per Sirius 850 and Sirius 840 frames 24 Ch input cards Sirius 840 frame MV-800 Multiviewer slot MV-800 Multiviewer slot MV-800 Multiviewer slot Multiviewer crosspoint Crosspoints x 4 Redundant crosspoints MV-850 MV5 48 Standard video outputs 24 Ch input cards MV-850 MV1 48 Standard video outputs Sirius 850 frame 10

11 MV-830 Integrated Multiviewer and Optional Desktop Software A fully featured integrated multiviewer for the Sirius 830 router with optional MV-800-DT desktop multiviewer software. The MV-830 populates one input and one output slot in the Sirius 830 frame and offers 24 router inputs and 24 router outputs, maintaining the routing capability of the slots and offering true source and destination monitoring. The MV-830 multiviewer benefits from worldclass image processing and scaling that provides an unmatched feature set and unique independent output routing facility, as well as input H.264 source streaming and unlimited output expansion capability with the MV-800-DT. Benefits Powerful processing capability at a very low cost Smaller form factor for saving space Simple configuration using dedicated configuration Flexible control options User upgradeable Applications The MV-830 integrated multiviewer is ideal for use in any that benefits from a single or multiple displays: Playout control rooms Studio galleries OB trucks Post production suites KEY FEATURES Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary multiviewer outputs. MV-830 high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence Up to 3 modules per routing frame See ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV-830 integrated multiviewer, we can offer some unique, powerful features included integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV-830 and MV-800-DT executes within a broadcast workflow. Multichannel Monitoring The MV-830 and MV-800-DT provide high-quality images even when used in advanced multichannel display. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On screen clock with regional time offsets Modes of Operation Redundant 48 inputs to multiviewer comprised of 24 from input and 24 mirroring router outputs Non-redundant 48 inputs selected from 24 inputs and 48 crosspoint connections In this mode the crosspoint interfaces are driven independently to offer greater flexibility in the multiviewer operation Combines true source and destination monitoring in a single unit Superior density 48 multiviewer inputs to 12 multiviewer outputs: 4 standard outputs 5-12 optional license 24 router inputs and outputs per card the MV-830 uses two routing slots while maintaining 24 routing inputs and 24 routing outputs World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system-wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options Mix HD, 3G & 4K UHD sources on HD, 3G and 4K UHD displays simultaneously AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration Maximum 12 MV-830 modules per Sirius 830 Additional multiviewer capability can be added using the MV-800 populated in the dedicated multiviewer slots of the frame Router o/ps 1-24 Router i/ps 1-24 MV-830-RP Connectivity Redundant control port 1 GbE Control Port Dual USB HDMI (future use) GPI LTC Interface MV Outputs 1-12 Dual SFP (fiber or SDI) 11

12 SPECIFICATIONS Inputs 48 (from router) SD 525/59.94 & 625/50 HD 720p (50, 59.94, 60 frames) HD 1080i (25, & 30 frames) 3G 1080p (50, & 60 frames) 4K UHD quad link (uses 4 inputs per 4K UHD source) IP support via Sirius 800 IP router inputs Outputs 4 video outputs (coax or fiber) (upgradeable to 12): 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the Grass Valley desktop multiviewer the MV-800-DT 24 router inputs and 24 router outputs providing true source and destination monitoring: router outputs mapped 1:1 to multiviewer inputs On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output) Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed caption & subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge from hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered with a Router When ordered as part of a Sirius 800 system, the part number for the system will include the necessary MV-8 parts. Ordered as Individual Parts When ordered as separate parts, the order codes shown are needed to build a complete system. Order Quantities Maximum modules per router frame: Sirius 830: 12 modules MV-830 MV-830 Integrated Multiviewer Module, including 4 output license Additional licenses required to enable outputs Maximum of 12 cards per frame MV-830-RP MV-830 Multiviewer Rear Panel With SFP output cages which will accept coaxial (HD-BNC) or fiber SFP modules. SFP ordered separately. Module includes 24 router inputs and 24 router outputs HD-BNC MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 Desktop Multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat Maximum of 12 modules per Sirius 830 frame 24 Ch input cards Sirius 830 frame MV-800 Multiviewer slot MV-800 Multiviewer slot Multiviewer crosspoint Crosspoint Redundant crosspoint 24 Ch input cards MV standard video Inputs & Outpus MV standard video Inputs & Outpus 12

13 MV-820 Graphics LINE OUT M/E 1 Space-saving 2 RU Boxed Standalone Multiviewer The MV-820 is a high-density multiviewer that s perfect for s requiring space-saving solutions yet still the highest quality image display. CAM 17:10:04 Clean PGM M/E 2 M/E 3 M/E 4 M/E 5 17:10:04 The MV-820 multiviewer is part of the MV-8 series multiviewer range. It is small and compact but with a high-density I/O and the only multiviewer to offer 48 inputs and 12 outputs in a 2 RU chassis. This makes the MV-820 ideal for on-the-road productions, flyaway packs, houses of worship and conference and events. Benefits Excellent picture quality Comprehensive monitoring and alarm capability Simple intuitive configuration High-density in compact chassis Applications The MV-820 external multiviewer is ideal for use in any that benefits from a single or multiple display(s): Playout control rooms Studio galleries OB trucks Houses of worship Conference and events Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary MV-820 multiviewer outputs. MV-820 high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence See ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV-820 standalone multiviewer, we can offer some unique, powerful features including integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV-820 executes within a broadcast workflow. Multichannel Monitoring The MV-820 provides high-quality images even when it s used in advanced multichannel display. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On screen clock with regional time offsets KEY FEATURES Superior density 48 inputs to 12 outputs 4 standard outputs World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options Mix HD, 3G & 4K UHD sources on HD, 3G and 4K UHD displays simultaneously AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration MV-820 Connectivity 13

14 SPECIFICATIONS Inputs 48 (from router) SD 525/59.94 & 625/50 HD 720p (50, 59.94, 60 frames) HD 1080i (25, & 30 frames) 3G 1080p (50, & 60 frames) 4K UHD quad link (uses 4 inputs per 4K UHD source) IP support via Sirius 800 IP router inputs Outputs 4 video outputs (coax or fiber) (upgradeable to 12): 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the Grass Valley MV-800-DT desktop multiviewer On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output) Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed caption & subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge form hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered as Individual Parts When ordered as separate parts, the order codes listed are needed to build a complete system: MV-820-HDBNC MV RU Standalone Multiviewer, including 4 standard output licenses, multiformat 48 HD-BNC inputs. Additional licenses required to enable outputs SFP modules ordered separately for outputs 1-4. SFP for 1 Gb control interface included. MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP1112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 desktop multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat 14

15 MV-820-IP Graphics M/E 1 LINE OUT Space-saving 2 RU Boxed Standalone Uncompressed IP Multiviewer The MV-820-IP is a high-density uncompressed IP multiviewer that s perfect for s requiring space-saving solutions yet still the highest quality image display. CAM 17:10:04 Clean PGM M/E 2 M/E 3 M/E 4 M/E 5 17:10:04 The MV-820-IP multiviewer is part of the MV-8 series multiviewer range. It is small and compact but with a high-density I/O and the only multiviewer to offer 48 IP inputs and 12 IP outputs in a 2 RU chassis. This makes the MV-820-IP ideal for high-density IP monitoring s. Benefits Excellent picture quality Comprehensive monitoring and alarm capability Simple intuitive configuration High density in compact chassis Applications The MV-820-IP external multiviewer is ideal for use in any that benefits from a single or multiple displays: Playout control rooms Studio galleries OB trucks Houses of worship Conference and events Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary MV-820-IP multiviewer outputs. MV-820-IP high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence See ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV-820-IP standalone multiviewer, we can offer some unique, powerful features including integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV-820-IP executes within a broadcast workflow. Multichannel Monitoring The MV-820-IP provides high-quality images even when it s used in advanced multichannel display. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On-screen clock with regional time offsets Multiple timer support KEY FEATURES 12 outputs 4 standard outputs World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options in addition to IP multiviewer outputs AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration MV-820-IP Connectivity 15

16 SPECIFICATIONS Inputs 48 (from IP backbone) SMPTE ST /7, TR O3/04 Redundant 50 GbE input architecture, using 100 GbE QSPFs Outputs 4 IP video outputs as standard (upgradeable to 12), all IP outputs duplicated on SDI or fiber using standard MV-820 connectivity) 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the Grass Valley MV-800-DT desktop multiviewer On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output) Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed caption & subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge form hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered as Individual Parts When ordered as separate parts, the order codes shown are needed to build a complete system: MV-820-IP MV-820-IP 2 RU Standalone Uncompressed IP Multiviewer Offers up to 12 SDI outputs (simultaneous IP) from 48 scalers, 48 IP inputs using 4x 100 GbE QSFPs Additional licenses required to enable outputs SFP modules ordered separately for outputs 1-4. SFP for 1Gb control interface included. Input 100 Gb QSFPs ordered separately MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP1112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 desktop multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat 16

17 MV G Space-saving 2 RU Boxed Standalone Multiviewer The MV G is a high-density 12G-SDI multiviewer that s perfect for s requiring space-saving solutions yet still the highest quality image display. CAM 17:10:04 Graphics Clean PGM M/E 1 M/E 2 M/E 3 M/E 4 M/E 5 LINE OUT 17:10:04 The MV G multiviewer is part of the MV-8 series multiviewer family. It is small and compact but with a high-density I/O and the only multiviewer to offer 48 12G-SDI single link inputs and 12 3G or 4x 4K UHD outputs in a 2 RU mainframe. This makes the MV G ideal for on-the-road productions, flyaway packs, houses of worship, and conferences and events. Benefits Excellent picture quality Comprehensive monitoring and alarm capability Simple intuitive configuration High-density in compact chassis Applications The MV G external multiviewer is ideal for use in any that benefits from a single or multiple displays: Playout control rooms Studio galleries OB trucks Houses of worship Conferences and events Architecture Extend and expand monitoring with additional MV-800-DT licenses, independent from the primary MV G multiviewer outputs. MV G high-resolution low-latency primary monitoring MV-800-DT secondary monitoring confidence See ordering section for more details. Advanced Monitoring Capability With the development of advanced technology within the MV G standalone multiviewer, we can offer some unique, powerful features including integrated control and monitoring. The diagram on page 4 highlights the advanced monitoring the MV G executes within a broadcast workflow. Multichannel Monitoring The MV G provides high-quality images even when it s used in advanced multichannel display. No compromise on quality provides the highest picture output for today s broadcast environment. Multichannel display with graphical background and channel logos for clear identification Mix on-air, program, preset and key previews Full audio metering Automation playlist display On-screen clock with regional time offsets KEY FEATURES Superior density 48 12G-SDI inputs to 12 outputs 4 standard outputs World-class image processing and scaling Up to 32 channels of audio metering per source Internal and external UMD and tally support Clock and timers Unique input source streaming (H.264 used in conjunction with the MV- 800-DT desktop multiviewer software) Unlimited desktop multiviewer output expansion capability with MV- 800-DT Integrated control and monitoring of system-wide external devices as well as internal video and audio sources Full audio, video and metadata alarm support Multiple display wall control SDI and fiber output options Mix HD, 3G & 12G-SDI sources on HD, 3G and 4K UHD displays simultaneously AFD/WSS auto support Safe area and aspect ratio outlays Full RollCall integration MV G Connectivity 17

18 SPECIFICATIONS Inputs 48 SD 525/59.94 & 625/50 HD 720p (50, 59.94, 60 frames) HD 1080i (25, & 30 frames) 3G 1080p (50, & 60 frames/s) 4K UHD quad link (uses 4 inputs per 4K UHD source) 6G, 12G-SDI inputs Outputs 4 video outputs (coax or fiber) (upgradable to 12): 4K UHD, 3G 1080p (50, & 60 frames, locked to reference) Video delay 3 fields interlaced, 3 frames progressive Quad link 4K UHD output support 48 inputs encoded as H.264 IP output streams for use in the Grass Valley MV-800-DT desktop multiviewer On-screen Monitoring Fully flexible layouts: any object can be any size, in any position (48 scalers any scaled source can be duplicated in any position on any output) Up to 16 audio channels per video signal Bars outside or overlaid on picture Audio meter scales on/off Adjustable layering and transparency of objects over video or other objects or background video Display up to 48 tiles on a single screen, plus additional tiles for clocks and tallies: Programmable color & alarm thresholds WSS/AFD flags to auto adjust aspect ratio of images within a video tile audio: Metadata & control Metering of AES embedded audio, VU, extended VU, DIN, BBC, Nordic scales including DolbyE: Closed caption & subtitle detection UMD source names via: Grass Valley general remote protocol SW-P-08 over IP TSL v3 or v5 protocol over IP Alarm Notifications Border alarm In-picture message SNMP, via RollCall Manufacturers protocol Master GPO Video alarms Video black Video frozen Loss of video Loss of CC Loss of VITC data Audio Alarms Audio over level Audio under level/loss Loss of embedded channels DolbyE Status Indicators Input standard CC standard Source ID V-Chip status Additional Alarms Test boxes Logos Alarm Control Configurable alarms threshold and trigger delays: Alarm acknowledge form hard and soft panels via RollCall interface Alarm acknowledge/clear/previous fault indication (border color or tally alarm box): Alarm auto-clear after preset delay ORDERING Ordered as Individual Parts When ordered as separate parts, the order codes shown are needed to build a complete system: MV G The MV G 2 RU Standalone Multiviewer Offers up to 12 SDI outputs from 48 scalers, 48 12G HD-BNC inputs. Additional streamed outputs and Media Biometrics offers additional monitoring capability. Additional licenses required to enable outputs SFP modules ordered separately for outputs 1-4. SFP for 1 Gb control interface included. MV-800-OP56 License upgrade to enable outputs 5 & 6 MV-800-OP78 License upgrade to enable outputs 7 & 8 MV-800-OP910 License upgrade to enable outputs 9 & 10 MV-800-OP1112 License upgrade to enable outputs 11 & 12 CC-TTH-3G-N Dual output HD-BNC coaxial SFP module ST31ST31-3 Dual output fiber SFP module (1310 nm single mode LC/PC) MV-800-DT MV-800 desktop multiviewer license code License code to enable software for MV-800 desktop multiviewer for streaming IP sources, 1 license per seat 18

19 MV-Flex 1 RU and 3 RU Flexible, Modular Multiviewer Systems A flexible, cost-effective solution for multi-image displays on up to twelve video monitors. The MV-Flex is ideal for use in playout, lines in, signal monitoring, and for live production in studio and OB environments. Excellent picture quality Comprehensive monitoring and alarm capability Simple intuitive configuration Applications The MV-Flex is ideal for use in: Playout control rooms Studio galleries OB trucks Post production suites Lines monitoring areas In fact any that benefits from a single or multiple displays. Architecture Network/ Interface Card (1 per frame) Reference, LTC, VITC Controller/Output Cards 19 Configurable Slots in 3 RU 5 Configurable Slots in 1 RU 4K UHD output support 4 or 8 Channel Input Cards Feed Controller/Output Cards In addition to allowing high-quality video images to be viewed the MV-Flex will also : Generate audio metering of individual channels from AES or Dolby E Auto detect Dolby E formats and adjust bars to suit Show incorrect audio formats Allow two rows of audio metering for efficient use of display space Display audio phase indication Displays UMD source names from external routers and production switchers Show source tallies from tally systems Generate alarm indicators Generate safe area marker Generate real-time clocks or timers Allow multiple clocks with timezone offsets Display timecode Display closed captioning Decode and use WSS (wide screen signaling for aspect ratio control) Store and display bitmap files, e.g., for channel logo images Display message boxes containing text, updated from external systems News Van Applications 1 RU 16x2 for small spaces Looping inputs avoid the need for DAs on router outputs Routing option available in 1 RU KEY FEATURES Multiformat analog/sd/hd/3g/4k UHD inputs Fully scalable images Audio metering Dolby metering Audio format indication Multiple metering scales, with flexible bar layouts UMD tallies Comprehensive alarms for video, audio and metadata Analog and digital clocks (with timezone offsets) Subtitle, CC & VITC display AFD, WSS detection and auto aspect ratio switching GPI/O Ethernet and serial comms to external control systems Intuitive web interface for simple configuration Flexible Frame Configuration Fit any number of controller/output modules in a frame, with any combination of input cards per controller From 144x2 video, to 24 quad split displays in a single 3 RU frame Up to 6 dual output multiviewer systems in a 3 RU chassis Two independent outputs per system, each SDI with HDMI copy Monitor on a local screen using HDMI, and route to remote screens using SDI Support for 4K UHD HDMI 2.0 and quad link SDI on CTL2 output card Internal routing option in 1 RU Up to 32 inputs across two outputs, plus 32 routed outputs Fully modular rear panels for maximum flexibility Mix serial video, PC graphics, composite video, audio and tallies in a single system SDI auto detection from SD to 3G Looping inputs enable simple expansion or in signal path monitoring HDMI inputs allow simple display of PC graphics Multiple GPIs and GPOs for external tally and alarm triggers 19

20 Off Air Monitoring Up to 72 inputs for off-air monitoring HDMI inputs for direct set top box connection Audio loss alarms Metadata loss alarms (CC, WSS, V-chip, AFD, etc.) Simple on-screen labeling of sources :42:20 16:42:20 Multichannel Playout Multichannel display with graphical background and channel logos for clear identification. Mixer on-air, program, preset and key previews Full audio metering Automation playlist display On-screen clock with regional time offsets ON AIR PREVIEW ON AIR PREVIEW ON AIR ON AIR ON AIR ON AIR ON AIR ON AIR PREVIEW PREVIEW PREVIEW PREVIEW PREVIEW PREVIEW 17:10:04 17:10:04 Controller/Outputs Inputs Controller/Outputs Inputs Off-air decoders HDMI Playout ICE2 Playout ICE1 Playout ICE8 Outside Broadcast/Live Production Multichannel display with graphical background and channel logos for clear identification. 1 RU multiple systems in a single rack allow production switcher live operation, plus multiple quad split monitoring feeds Cue lights UMD tallies showing switcher and router source names Clock HDMI out for local monitors, with SDI copy for remote feeds or copies in the trucks Multichannel Quad Split Up to 6 dual output systems in 3 RU feed 12 quad split displays Graphics LINE OUT M/E 1 M/E 2 Clean M/E 3 PGM M/E 4 CAM 17:10:04 M/E 5 17:10:04 Slo-mo Controller/Outputs Inputs ROUTER SWITCHER 20

21 Monitoring and Alarms Audio metering of individual channels from AES or DolbyE Auto detect Dolby E formats and adjust bars to suit Show incorrect audio formats One or two rows of audio metering for efficient use of display space Audio phase indication UMD source names from external routers and production switchers Source tallies from tally systems Alarm indicators Safe area marker Real-time clocks or timers VITC or LTC timecode display Multiple clocks with timezone offsets Closed captioning decode WSS control of individual tile displays Store and display graphics for on screen logos Alert message boxes containing text, updated from external systems. Fully modular rear panels for maximum flexibility Mix serial video, PC graphics, audio and tallies in a single system SDI auto detection from SD to 3G Looping inputs enable simple expansion and in signal path monitoring HDMI inputs allow simple display of PC graphics Multiple GPIs and GPOs for external tally and alarm triggers Content and metadata monitoring and alarms Clear indication of missing or incorrect metadata on screen and via external alarm Audio bargraph (embedded and discrete AES) including Dolby E metering Wrong audio format detection gives simple indication on screen or via alarm Subtitle, AFD, WSS, VITC decoding and monitoring Subtitle/teletext monitoring: WST / ITU-R BT.653-3, SD only OP47 SD, HD, 3G-A Closed captions: CEA-608 NTSC AFD driving aspect ratio: SMPTE ST 2016, SD, HD and 3G-A WSS driving aspect ratio: ETSI EN300294, composite D-VITC display: SMPTE ST 12 SD-SDI only Control Integration The MV-Flex integrates with many Grass Valley routing and switcher products. This allows tallies from router and switcher controllers simultaneously, meaning that all routing changes on either system are correctly indicated. If tielines are used, the original source name is displayed, not just the source on the local router. Custom alarms can be triggered on screen, with configured text and text box colors, driven from RollCall or other third-party s, providing system level alarms on an MV-Flex output. Simple Browser-based Configuration Simple web browser-based configuration means no software to install before configuration can begin. Configuration tools include: Grouping Align to grid Auto scale to aspect ratio Multicolor indication of borders for different types of tile Auto-update of screens as changes are made, or push once layout is complete Input setups (audio meter colors, over/under levels, and alarm settings) for any input can be applied to one or more selected inputs to speed configuration. Frame 1 Clear on-screen alarms. Video and audio alarms are displayed on each tile. Alarms can be set for each tile, and font size is fully configurable. Systems per frame (each system has 2 outputs) Two rows of audio metering for efficient use of display space. Incorrect audio format indicators and alarms. Expected audio formats can be defined for each channel if this format is not present, a different colored bar is displayed. Alarm text can also be displayed. Total no. of configurable slots Maximum no. of video inputs (per system) Dolby metering. Meter all Dolby E formats simply and clearly. Maximum no. of audio inputs (per system) 3 RU (18 cards) 256 (8 cards) 1 RU (4 cards) 32 (1 card)

22 SPECIFICATIONS VIP3 3G/HD SD/Composite Video Input Card Number of inputs 4 3G/HD/SD, optionally 2x composite video, PAL/ NTSC, CVBS: 1 Vpp Input formats and standards supported PAL, PAL-M, NTSC, NTSC-4.43 SD-SDI, HD-SDI, 3G-SDI 720x480i59.94, 720x576i x1080i60, 1920x1080i59.94, 1920x1080i50, 1920x1080p30, 1920x1080p29.97, 1920x1080p25, 1920x1080p24, 1920x1080p23.98, 1280x720p60, 1280x720p59.94, 1280x720p x1080p60, 1920x1080p59.94, 1920x1080p50. Note: Only 2 inputs per card support analog formats. Video input loop-through (MV-L4B) 3G, HD and SD. Four-channel rear panel with HD BNC connectors with active loop-through to a second frame. VIP3D video input card with Dolby metering Features as VIP3, with additional features below: Metering capacity Dolby Up to 4 Dolby encoded pairs per input Mono audio A maximum of 32 mono audio channel meters can be displayed per video tile Dolby metering operation Auto-detect Audio meters adjust to incoming format Fixed Audio bars are set to defined format. Channels of different formats are shown in alarm color Video outputs 2x SDI outputs with 2x HDMI copies Output formats Format HD 720p HD 720p 3G 1080p 3G 1080p Resolution 1280x720, 50 Hz 1280x720, 59.94/60 Hz 1920x1080, 50 Hz 1920x1080, 59.94/60 Hz Video processing delay Nominal delay with co-timed input signals is 1 frame Non-synchronous signals can add up to 1 frame of delay When used, analogue composite inputs add an additional 1 frame of delay Image configuration Images can be continuously varied in size and position on screen or may be displayed in pre-configured layouts, positions and sizes. When the outputs are configured to feed two display devices the tiles may be assigned to one or both outputs. The system menu can be displayed on one or both video outputs. Audio metering standards AES/EBU, BBC PPM, DIN PPM, Nordic PPM, VU and Extended VU Alarms Video: loss of sync, loss of luminance, freeze frame or motion Audio: loss of embedded or external audio, over level, out of phase, wrong format + Dolby E loss (VIP3D only) Other: loss of VITC, subtitles or V-chip, video non-sync detection Rear Panels & Connectors MV-BNC Inputs: 1920x1080, 59.94/60 Hz Formats: SDI (SD, HD or 3G). PAL/NTSC on 2 channels MV-HM2 Inputs: 2x HDMI, 2x BNC Formats: HDMI All HDMI 1.4 supported aspect ratios BNC SDI (SD, HD or 3G) MV-HM4 Inputs: 4x HDMI 1.4 Formats: All HDMI 1.4 supported aspect ratios MV-L4B/MV-R4B Inputs: 8x HD-BNC looping or routed 4 channels video (for expansion to a second frame) Formats: SDI (SD, HD or 3G) NV-A32 Inputs: 2x 44-way D-type 16 channels per connector Formats: AES/analog audio (depending on module fitted in the front) Environmental MV-Flex 1 RU Depth: 426 mm (16.77 in.) Weight: 8 kg (18 lbs.) Supply voltage: VAC, 50/60 Hz Backup power: External 1 RU (MV-EXT PSU) provides 24 VDC Power: 190W max. Cooling: Fan assisted, front to side MV-Flex 3 RU Depth: 483 mm (19.02 in.) Weight: 19 kg (42 lbs.) Supply voltage: VAC, 50/60 Hz Backup power: External 1 RU (MV-EXT PSU) provides 24 VDC Power: 712W max. Cooling: Fan assisted, front to top and side ORDERING Frames MP-X1-0 MV-Flex 1 RU frame including MV-NET MV- NRP rear panel. MP-X1-R MV-Flex 1 RU frame with router capability. Including MV-NET and MV-NRP rear panel. NOTE: routing capability needs MV-R4B rear panels to access router outputs. Routing card is for SDI signals only MP-X3-0 MV-Flex 3 RU frame including MV-NET and MV- NRP rear panel. Interface & Controller/Outputs MV-NET Network/interface card (1 per frame supplied with all frames) MV-NRP Network/interface rear panel (1 per frame supplied with all frames) MV-CTL Multiviewer control/output card (VIP3 card only) MV-CTL2-SD Multiviewer control and output cards for and MV-RMVCS8 use with VIP4 card, multiviewer control/output rear for CTRL2 card MV-RCT Multiviewer control/output rear panel Rear Panels MV-BNC 4x BNC inputs + GPI/O (8 in, 4 out). All inputs accept SDI. Inputs 1 & 2 accept composite MV-HM2 2 HDMI inputs + 2 BNC inputs + GPI/O (8 in, 4 out). BNC inputs accept SDI or composite MV-HM4 4x HDMI inputs + GPI/O (8 in, 4 out) MV-L4B 4x SDI/composite inputs & 4 x SDI Loop-through (HD-BNC) + GPI/O (8 in, 4 out). All inputs accept SDI inputs 1 & 2 accept composite MV-R4B 4x multirate SDI/composite inputs, 4x SDI router out + GPI/O (8 in, 4 out). All inputs accept SDI. Inputs 1 & 2 accept composite MV-A32 32x audio inputs/outputs (depending on audio card type fitted). Balanced audio on 2x 44W high-density D-Type PSUs MV-EXTPSU An external backup power unit in a 1 RU frame provides power to the MV-Flex in the event of an internal power supply failure. It also supports hot swapping of faulty power modules. MV-1000PSU PSU module. For 1 RU, 3 RU and external PSU chassis 22

23 Input Cards Order code Description Analog mono channels AES channels MV-VIP3 VIP3 Video Input Card, multirate SDI/HDMI MV-VIP4SD VIP4 8-channel Video Input Card, multirate SDI, 4K UHD quad link compatible MV-VIP3D VIP3D Video Input Card, multirate SDI/HDMI, Dolby E metering MV-AIP08A MV-Flex 8ch mono analog audio I/P 8 MV-AIP16A MV-Flex 16ch mono analog audio I/P 16 MV-AIP32A MV-Flex 32ch mono analog audio I/P 32 MV-AIP08D MV-Flex 8ch AES audio I/P 8 pairs MV-AIP16D MV-Flex 16ch AES audio I/P 16 pairs MV-AIP32D MV-Flex 32ch AES audio I/P 32 pairs MV-AIP08AD MV-Flex 8+8ch AES/analog audio I/P 8 8 pairs MV-AIP16AD MV-Flex 16+16ch AES/analog audio I/P pairs MV-AIP32AD MV-Flex 32+32ch AES/analog audio I/P 32* 32 pairs* MV-AOP08D MV-Flex 8ch AES audio O/P 8 pairs MV-AOP16D MV-Flex 16ch AES audio O/P 16 pairs MV-AOP32D MV-Flex 32ch AES audio O/P 32 pairs * Total of 32 connections Support Grass Valley provides a host of world class customer services that take our clients from the inception of a project, through all of the key stages to successfully get on air, and throughout the system s working life. Services include: Workflow Analysis Systems Architecture Implementation Operational Training On-going Support For more information, please contact your Grass Valley representative. GVB A-EN-DS Join the Conversation at GrassValleyLive on Facebook, Twitter, YouTube and Grass Valley - A Belden Brand on LinkedIn. Belden, Belden Sending All The Right Signals, and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Grass Valley products listed above are trademarks or registered trademarks of Belden Inc., GVBB Holdings S.A.R.L. or Grass Valley Canada. Belden Inc., GVBB Holdings S.A.R.L., Grass Valley Canada and other parties may also have trademark rights in other terms used herein. Copyright 2018 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. 23