Key Digital Exclusive KD-BBTX / KD-BBRX. Video/Audio HDMI /DVI Smart Baluns with RS-232/IR Connection over CAT5/5e/6. Operating Instructions

Size: px

Start display at page:

Download "Key Digital Exclusive KD-BBTX / KD-BBRX. Video/Audio HDMI /DVI Smart Baluns with RS-232/IR Connection over CAT5/5e/6. Operating Instructions"

Victoria Alexander
5 years ago
Views:

1 Key Digital Exclusive KD-BBTX / KD-BBRX Video/Audio HDMI /DVI Smart Baluns with / Connection over Operating Instructions

2 Page 2 Quick Set Up Guide Step 1: Begin with the KD-BBTX and all input/output devices turned off with power cables removed. Step 2: Connect video/audio sources to appropriate input ports on the KD-BBTX. Step 3: Connect cable to KD-BBTX output. Step 4: Connect cable to KD-BBRX input. Step 5: Connect video/audio devices to appropriate output ports on the KD-BBRX. Step 6: Connect power to the KD-BBTX, KD-BBRX and all other input/output devices and turn them on. Step 7: Allow up to five minutes for auto equalizations to take place. KD-BBTX Blu-Ray HDMI Control System Up to 300 CAT5/6/7 cable with bi-directional / HDMI Display KD-BBRX Desktop PC KD-BBTX Analog Audio DVI Video* Up to 300 CAT5/6/7 cable with bi-directional / Control System DVI Video* Display KD-BBRX CAT5/6/7 Audio HDMI DVI Audio Rcvr. *To connect DVI use Key Digital HDMI to DVI adapters, part numbers KD-FMHDMI and KD-MFHDMI Analog Audio Speakers Note: No signal conversion done on KD-BBTX; KD-BBRX. If input signal is HDMI output signal will be HDMI. If input signal is DVI, output signal will be DVI.

3 Page 1 Table of Contents About the KD-BBTX; KD-BBRX Pin Assignment for KD-BBTX; KD-BBRX Video/Audio Connections DVI Applications for KD-BBTX; KD-BBRX Dip Switch Configurations for KD-BBTX; KD-BBRX Accessories Supported Resolutions Installation and Operation Troubleshooting Mechanical/Technical Specifications Important Product Warnings Safety Instructions How to Contact Key Digital Warranty Please read all instructions to insure safe operation of the product Key Digital, Inc. All rights reserved.

4 Page 2 About the KD-BBTX; KD-BBRX Transmits (KD-BBTX) and Receives (KD-BBRX) 1080p/60 HDMI/DVI signals up to 150 feet and 1080p/24, 1080i, 720p, 480p, 480i HDMI/DVI signals up to 300 feet over cable. Transmits and Receives and control signals up to 300 feet over cable utilizing Key Digital s exclusive Adaptive Smart Data Link technology. Transmits (KD-BBTX) and Receives (KD-BBRX) Left/Right analog or PCM digital audio up to 300 feet over standard cable Automatically performs measurement of link frequency response and performs adaptive video response equalization for maximum video quality performance utilizing Key Digital s exclusive Auto Video Equalizer technology. Can handle all major video and audio formats such as analog stereo (balanced/ unbalanced) and digital S/PDIF. Shielded RJ45 for best picture quality with UTP or STP cable. Compliant with CAT5, CAT5e, CAT6 and CAT7 cables. KD-BBTX Blu-Ray HDMI Control System Up to 300 CAT5/6/7 cable with bi-directional / HDMI Display KD-BBRX Desktop PC Analog Audio DVI Video* Note: Maximum distance specifications may vary based on UTP cable and crimping connection quality. For optimum performance at maximum distances, please use STP cabling with properly soldered shielded Control System DVI Video* RJ45 connectors. HDMI HDCP handshake information (DDC) and external audio cannot be supported simultaneously. Display *To connect DVI use Key Digital HDMI to DVI adapters, part numbers KD-FMHDMI and KD-MFHDMI Analog Audio Audio Rcvr.

5 Page 3 Pin Assignment for KD-BBTX; KD-BBRX PIN # Description TMDS 0- TMDS 0+ Video/Audio Connections TMDS C+ Input (KD-BBTX) / Output (KD-BBRX) Video HDMI / DVI via (1) HDMI Connector TMDS 1- TMDS 1+ TMDS C- TMDS 2- Audio Analog: L+, L-, R+, R- via (1) Terminal Block 6c style connector, included. Balanced/unbalanced compatible Digital: PCM via (1) RCA style connector Data Connection + via (1) Terminal Block 5c style connector, included Blu-Ray HDMI Input (KD-BBRX) / Output (KD-BBTX) Single Control System TMDS 2+ HDMI DVI Applications for KD-BBTX; KD-BBRX Display KD-BBTX; KD-BBRX can also be used to extend DVI video cable runs. For these applications, use DVI to HDMI (Key Digital model number KD-MFHDMI or KD-FMHDMI) adapters. Desktop PC KD-BBTX Analog Audio DVI Video* Up to 300 CAT5/6/7 cable with bi-directional / Control System DVI Video* Display KD-BBRX CAT5/6/7 Audio HDMI DVI Audio Rcvr. *To connect DVI use Key Digital HDMI to DVI adapters, part numbers KD-FMHDMI and KD-MFHDMI Analog Audio Speakers

Page 4 Dip Switch Configurations for KD-BBTX 1.

Audio or DDC Switch Used to select either external audio (L/R Analog or PCM Digital) or HDMI handshake

Note: HDMI HDCP handshake information (DDC) and external audio cannot be supported simultaneously.

Low or High Switch No current functionality Fine Equalizer KD-BBRX 1.

6 Page 4 Dip Switch Configurations for KD-BBTX 1. L/R or PCM Switch Used to select either L/R Analog or PCM Digital audio. 2. Audio or DDC Switch Used to select either external audio (L/R Analog or PCM Digital) or HDMI handshake information (Ie. HDCP, EDID). Note: HDMI HDCP handshake information (DDC) and external audio cannot be supported simultaneously. Therefore, selecting DDC will nullify any selection of dip switch # 1 3. Low or High Switch No current functionality Fine Equalizer KD-BBRX 1. Fine Equalizer Adjustment Knob Used to fine tune equalization settings based on cabling used Accessories External 5 Volt 1 Amp switching power supply (for 110V-240V applications) Operating Instructions You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment.

7 Page 5 Supported Resolutions Common Video Resolutions Resolution Common Name Distance 720 x 480 (split into two fields) 480i x p x p x 1080 (split into two fields) 1080i x p / x p / Common Computer Resolutions Resolution Common Name Distance 800 x 600 SVGA x 768 XGA x 768 WXGA x 1024 SXGA x 768 WXGA x 1080 SXGA x 1200 UXGA x 1200 WUXGA 150

Page 6 Installation and Operation The KD-BBTX; KD-BBRX must receive power from the supplied power adapter. We recommend the use of STP cabling for best performance.

Find a safe and convenient location for the KD-BBTX; KD-BBRX unit a. The KD-BBTX; KDBBRX is shipped with a convenient mounting clip as an installation option.

8 Page 6 Installation and Operation The KD-BBTX; KD-BBRX must receive power from the supplied power adapter. We recommend the use of STP cabling for best performance. Before permanently securing the unit or final installation of cabling behind walls or ceilings, test for proper operation of the unit and the cables in your system. 1. Find a safe and convenient location for the KD-BBTX; KD-BBRX unit a. The KD-BBTX; KDBBRX is shipped with a convenient mounting clip as an installation option. Once you have verified operation of the unit with your cables, secure the mounting clip to a convenient location. Carefully insert the KD-BBTX; KD-BBRX into the mounting clip provided. 2. Connections a. Plug in desired Video source into HDMI style connector port of the KD-BBTX; KD-BBRX. b. Plug in desired Audio source*: i. Audio over HDMI or ii. PCM into RCA style connector or iii. Analog L/R Audio into Terminal Block 6c style connector 3. Connecting Unbalanced Analog L/R Audio* a. On Terminal Block 6c Style Connector, depress orange buttons with small screwdriver and insert as follows: i. L Signal = Pin 3 ii. L Ground = Pin 2 iii. R Signal = Pin 6 iv. R Ground = Pin 5 * HDMI HDCP handshake information (DDC) and external audio cannot be supported simultaneously.

Page 7 4. Connecting Balanced Analog L/R Audio* a.

L Ground = Pin 2 iii. L- = Pin 3 iv. R+ = Pin 4 v. R Ground = Pin 5 vi. R- = Pin 6 5. Connecting & a.

Receive (Rx) = Pin 2 iii. Ground = Pin 3 iv. Bi-Directional Signal = Pin 4 v.

9 Page 7 4. Connecting Balanced Analog L/R Audio* a. On Terminal Block 6c Style Connector, depress orange buttons with small screwdriver and insert as follows: i. L+ = Pin 1 ii. L Ground = Pin 2 iii. L- = Pin 3 iv. R+ = Pin 4 v. R Ground = Pin 5 vi. R- = Pin 6 5. Connecting & a. On Terminal Block 5c Style Connector, depress orange buttons with small screwdriver and insert as follows: i. Transmit (Tx) = Pin 1 ii. Receive (Rx) = Pin 2 iii. Ground = Pin 3 iv. Bi-Directional Signal = Pin 4 v. Ground = Pin 5 Note: The use of an emitter / receiver that utilizes only two wires (data and ground) is recommended. 6. Select dip switch positions on the front of the unit according to the choices below: a. DDC b. Audio i. PCM ii. L/R 7. Connect the supplied power adapter and plug it into the power input jack. You should see the Power LED illuminate

10 Page 8 Troubleshooting Most issues with the KD-BBTX; KD-BBRX setup will involve resolution and distance performance. If you experience problems (no image, video artifacts, picture dropout, noise) here are a few things to try: 1. Allow auto-equalization to take place after initial setup. Auto-equalization may take up to five minutes. 2. HDMI HDCP handshake information (DDC) and external audio cannot be supported simultaneously. KD-BBTX; KD-BBRX supports either HDMI with HDCP or HDMI/DVI without HDCP in addition to external audio (L/R or PCM). and control signals are supported in either scenario. 3. Use the shortest possible HDMI/DVI and cables between devices. 4. Lower the output resolution of the image source. 5. Use Key Digital HDMI cables. 6. Verify that the Link light is active on KD-BBTX; KD-BBRX. Link light will not illuminate or possibly flicker if the cabling is not transmitting/receiving all necessary data. 7. Re-terminate cabling in accordance with TIA/EIA-568-A or TIA/EIA- 568-B pin-pair assignments (see diagram below). TIA/EIA-568-A PIN # Description White Green Green White Orange Blue White Blue Orange White Brown Brown TIA/EIA-568-B PIN # Description White Orange Orange White Green Blue White Blue Green White Brown Brown

11 Page 9 Technical Specifications Inputs/Outputs: 1 HDMI connector, 1 stereo analog balanced or unbalanced audio 1VRMS/10KΩ on a Phoenix connector; 1 digital S/PDIF audio 0.5Vpp/75Ω on an RCA connector, Tx, Rx line and ground on Phoenix connector; wired bi-directional on Phoenix connector; 1 CAT5 Input on a shielded RJ-45 connector (for video/audio/data) Bandwidth: TMDS bandwidth 10.2 Gb/s EQ Adjustments: Precise Auto Adjust, Distance Measurement HDMI and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP techologies Link and Range: 1080i/60, 720p, 1080p/24 UTP up to 250 ft. CAT6 UTP up to 280 ft. Deep Color Support: Supports Digital Video Formats in Deep Color Mode at up to 12 bits/color Additional Non-HDMI Audio: Left and Right Balanced or unbalanced on Phoenix connector or Coaxial Digital Audio S/PDIF on RCA connector DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL) HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p HDMI Connector: Type A, 19 Pin Female RJ45 Connector: Shielded Link Connector RJ45 DDC Communication: EDID and HDCP Transparency from Display to Source Additional Non-HDMI Wired : Tx and Rx Line active and bidirectional up to 115,200 baud rate Additional Non-HDMI Wired : line, active and bi-directional 0-5V TTL or V Power: External UL Certified Power Supply 5V DC / 2A, VAC, Hz RoHS COMPLIANT WEEE COMPLIANT

12 Page 10 Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors. Safety Instructions. Please be sure to follow these instructions for safe operation of your unit. 1. Read and follow all instructions. 2. Heed all warnings. 3. Do not use this device near water. 4. Clean only with dry cloth. 5. Install in accordance with the manufacturer s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: Damage to the power supply or power plug Exposure to rain or moisture You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment.

13 Page 11 How to Contact Key Digital System Design Group (SDG) For system design questions please contact us at: Phone: Key Digital Trainings For questions about Key Digital Trainings please contact us at: Phone: Customer Support For customer support questions please contact us at: Phone: Technical Support For technical questions about using Key Digital products, please contact us at: Phone: Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital Return Material Authorization (RMA) number by contacting us at: Phone: rma@keydigital.com Warranty All Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited two-year parts and labor warranty.

14 Page 12 * HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

15 Page 13

Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is

16 Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. We provide total video system solutions because we know and help drive the technology, the industry, the business, and all the latest up-and-coming standards. But most of all, we know exactly what you need for your unique application - the right solution. 521 East 3rd Street, Mount Vernon, NY Phone :: Fax :: Web :: Rev 0 Nov. 2009

KD-CATDRV. Operating Instructions. HDMI CAT5/5e/6 Extender

KD-CATDRV. Operating Instructions. HDMI CAT5/5e/6 Extender HDMI CAT5/5e/6 Extender Operating Instructions is a master box that includes one (1) Tx Transmitter Balun and one (1) Rx Receiver Balun. is capable of sending 1080P/60 to distances of up to 150 ft., and