Quick Start Guide Expandable Wireless TV Connection Receiver

Size: px

Start display at page:

Download "Quick Start Guide Expandable Wireless TV Connection Receiver"

Kristian Matthews
5 years ago
Views:

1 Quick Start Guide Expandable Wireless TV Connection Receiver GWMHDRX PART NO. Q1558

2 Package Contents 1 1 x HDMI Extender Receiver 1 x 3 ft. HDMI cable 1 x IR Extender Cable 1 x 5 VDC/2A Switching Power Supply 1 x Quick Start Guide 1 x Warranty Card System Requirements 1 HDMI display device (SDTV, HDTV, projector with HDMI port, etc.) IOGEAR Expandable Wireless TV Connection Kit GWMHDKIT22 or GWMRHDKIT

3 Overview 2 Receiver Front A. Input Channel indicator B. Channel selector button C. IR remote control window Receiver Back A B C D. Power input E. Data transmission indicator F. Wireless connection indicator G. HDMI output connector H. IR receiver extender cable connector I. Antenna connector I D E F G H

4 Hardware Installation 3 Please read safety instructions carefully before installation and operation: 1. Please pay attention to all the warnings and hints for this device. 2. Do not expose this unit to rain, moisture or liquid. 3. Do not insert any foreign object into the device. 4. Opening the enclosure will void the warranty. 5. Place the device in a well ventilated area. 6. Use DC5V/2A power adapter only. Make sure the specification matched if using 3rd party DC adapters. Note: 1) Transmission distance will vary due to the environment. 2) Obstructions such as wall, brick or glass will shorten the signal cover range or cause signal degradation. 3) It is recommended that the distance between each unit should be more than 15 feet. Connection Options 1 Transmitter 1 Receiver 1 Transmitter 2 Receivers 2 Transmitters 1 Receiver 2 Transmitters 2 Receivers

5 Hardware Installation Receiver 4 STEP 1 Install the antenna to the receiver STEP 2 Connect the IR receiver extender cable to the connector STEP 3 Connect one side of the HDMI cable to the receiver and the other side to your HDMI display device STEP 4 Connect DC5V/2A power adapter to the Receiver power input port

6 CHANNEL CHANNEL Hardware Installation STEP 5 You can now connect to the transmitter by selecting the same channel number as the transmitter from either of the receiver(s) connected to your TV(s) 5 5 Transmitter Receiver STEP 6 Wireless connection indicator of the transmitter and receiver will light up when the transmitter and receiver connection is established wirelessly If your video source and your display is on, you should be able to see the content of the source on your display NOTE: When the wireless signal is transmitted through walls, glass or other obstacles there could be signal degradation. It is advisable to install this device in a clear environment with few or no obstacles if possible

7 FAQ 6 Q Transmitter and receiver will not connect wirelessly A 1. Please check if the wireless connection light is on and blinking 2. Restart both transmitter and receiver 3. Reconnect HDMI cables Q My transmitter and receiver are not connecting A Make sure the channel numbers are the same on the receiver to the transmitter that you want to connect to Q The wireless indicator is on but nothing on the display A Please check and see if the video source is working correctly by connecting the HDMI cable directly to the display and see if the operation is now normal Q Video is flickering or not stable A 1. Change the position of the transmitter and receiver and make sure that they are within the specified operating distance 2. Restart the transmitter and receiver 3. Reconnect the HDMI cables 4. Check for any obstacles that may block the wireless signal from the transmitter to the receiver

8 Compliance Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications. Although this product complies with the limits for a Class B digital device, there is no guarantee that interference will not occur in a particular installation. CE Statement This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and R&TTED (1999/5/EC). Limited Warranty This product carries a 1 Year Limited Warranty. For the terms and conditions of this warranty, please go to Register online at Important Product Information Product Model Serial Number Contact WE RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Visit for more product information 2. Visit for live help and product support IOGEAR iogear.custhelp.com support@iogear.com

Quick Start Guide. Wireless TV Connection with Dongle. GWHDKITD PART NO. Q1504

Quick Start Guide. Wireless TV Connection with Dongle. GWHDKITD PART NO. Q1504 Quick Start Guide Wireless TV Connection with Dongle GWHDKITD PART NO. Q1504 www.iogear.com Package Contents 1 1 x GWHDKITD Transmitter 1 x GWHDKITD Receiver 1 x 3 feet HDMI Cable 1 x HDMI Extender Cable