7RF Connectors. RF Connectors. Table of Contents

Transcription

1 RF Connectors Table of Contents Military Qualified Introduction N Series Connectors MIL-C Ohm , 7005 NC Connectors MIL-C Ohm , 7007 TNC Connectors MIL-C Ohm , 7009 SM Connectors MIL-C-3902 Introduction For Flexible Cable Panel Mount For Semi-Rigid Cable Printed Circuit Mount In-Series dapters MIL SM Receptacles MIL-C-8357 Panel Mount Surface Launch End Launch Field Replaceable Launchers DSCC pproved SM Series for Semi-Rigid Cable SSM Connectors for Semi-Rigid and Flexible Cable M lindmate Connectors for Semi-Rigid and Flexible Cable P Microminiature Push-On Coaxial Connectors for Semi-Rigid Cable etween Series dapters for Semi-Rigid and Flexible Cable , 7033 Coaxial Cable Termination One-Step NC/TNC Connectors P Microminiature Push-On Coaxial Connectors Introduction , 704 s Shrouds , 7044 etween Series dapters M Microminiature Connectors Introduction , 7046 For Flexible and Semi-Rigid Cables SSM Subminiature Coaxial Connectors Introduction For Semi-Rigid Cable For Flexible Cable Panel Mount Receptacles ulkhead Mount Receptacles Panel Mount Receptacles Printed Circuit oards Microstrip Transmission Line Circuits Hermetically Sealed , RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

2 RF Connectors Table of Contents (Continued) SSM Subminiature Coaxial Connectors (continued) In-Series dapters High Frequency for Semi-Rigid Cable pplication Tooling Cross Reference MICRODOT Coaxial Connectors Introduction Standard Connectors Performance Data Summary Screw-On Series Slide-On Series Quick-Connect Series Twinax Series Triax Series and Terminals Module locks Caps for Screw-On Series, Receptacle Hoods Feed Thru dapters for Screw-On Series NC and TNC dapters for Screw-On, Slide-On, Quick-Connect Series , 7089 Gold Plated Crimp Style Coaxial Connector Series Performance Data Summary Screw-On Series ssembly Tools LEPR/CON Ultra-Miniature Connectors Performance Data Summary Screw-On Series Standard Interface , 7097 Screw-On Series Locking Interface , 7099 Slide-On Series , 70 ssembly Tools NC / LEPR/CON dapters , 703 Snap-Lock Series Cable ssemblies , 706 Cable cceptance Dimensions Hermetic Connectors Coaxial Screw-On, Slide-On Series , 74 ppendix - Theory and pplication Typical Coaxial Cable Specifications C - Maximum Power Handling Capabilities for Cables D - Nominal Loss Characteristics for Cables Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

3 Military Qualified Introduction MIL-C-3902 Defines the general requirements and tests for radio frequency (RF) connectors used with flexible RF cables and certain other types of coaxial transmission lines. It includes the following series of connectors in this catalog: N, NC, TNC, SM MIL-C Defines the performance requirements and tests for between series and within series, RF coaxial connector adapters. The In-Series dapters are shown in this catalog MIL-C-8357 Defines the general requirements and test for RF connectors used with coaxial, strip, or microstrip transmission line devices. It includes the SM Receptacles as shown in this catalog Definition of Categories for MIL-C-3902 Category Flexible Cable Field serviceable, no special tools required to assemble. Standard wrenches, soldering equipment, pliers, etc., are not defined as special tools. Captured center contact. Category Flexible & Semi-Rigid Cable Non-field replaceable, special tools may be required. These connectors may be used for original installations. Field replacement is intended to be made by Category or C Connectors. Will not be stocked or procured by the Government. Captured and noncaptured center contacts. Category C Flexible Cable Field replaceable. Requires crimp tool and specified cable stripping dimensions. Captured center contact. Recommended crimp tool kit: Part Number Category D Flexible Cable Field replaceable. Requires crimp tool for center contact and outer ferrule; specified cable stripping dimensions (same as Category C) and defined piece parts. Captured center contact. Recommended crimp tool kit: Part Number Category E Semi-Rigid Cable Field replaceable. Requires specified cable stripping dimensions. Captured and noncaptured center contact. Uses standard tool kit: Part Number Category F Semi-Rigid Cable Field replaceable. Requires crimp tool and specified cable stripping dimensions. Captured center contact. Recommended crimp tool kit: Part Number RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

4 Military Qualified N Series Connectors MIL-C Ohm Product Facts Dual O Crimp connectors are MIL-C-3902, Class II, Category qualified Captive center contacts Completely crimpable application one hand tool crimps all cables with single or double braided shields of a given size Impedance matching crimps road band performance low VSWR Superior cable retention TEFLON dielectric Silver finish The MP N MIL-C-3902 Connector, featuring a.625 [5.88] - 24 threaded coupling for optimum stability, is highly suited for critical applications and environments. This medium sized connector can withstand shock and vibration for a low noise level and has a constant impedance of 50 ohms. It also features a captive center contact and provides excellent performance at frequencies up to GHz, with voltages to 000 volts rms. This connector offers the added benefits of low overall applied cost with a labor-saving two-crimp assembly. The contact is simply crimped to the cable s center conductor, then both braid and cable support are simultaneously crimped to complete the termination. N Series Connectors are available in standard plug, jack, bulkhead jack and rightangle plug configurations. Materials rass QQ--626 eryllium Copper QQ-C-530 Dielectric TEFLON TEFLON MIL-P-9468 Copper, nnealed QQ-C-576 Phosphor ronze QQ--750 Silicone Rubber ZZ-R-765 Plating ody Silver per QQ-S-365 Center Contact Gold per STM 488, type 3, grade C Electrical Characteristics Nominal Impedance 50 ohms Working Voltage 000 volts, rms at sea level Frequency Range 0 to GHz Voltage Standing Wave Ratio (VSWR) Straight Plug or -.3: max. Right-ngle Plug.35 max. at 0 to 9.0 GHz.50 max. at 9.0 to.0 GHz Contact Resistance Outer Contact 0.2 milliohms Center Contact.0 milliohms Right-ngle 2.5 milliohms Insulation Resistance 5000 megohms min. Dielectric Withstanding Voltage 2500 Volts, rms at sea level RF Leakage -90 d min. at 2 to 3 GHz RF Insertion Loss 0.5 d max. at 0 GHz; Right-ngle Plug, 0.3 d max. at 0 GHz Corona Level 500 volts min. at m [70,000 ft.] Mechanical Characteristics Mating/Unmating Threaded coupling Cable ttachment Crimp type - center contact and braid Coupling Nut Retention 445 N [00 lbs.] min. Cable Retention 400 N [90 lbs.] min. RG 24/U Cable Durability 500 cycles per MIL-C Captive Contact 27 N [6 lbs.] min. axial retention, either direction Environmental Characteristics Temperature Range -85 F to +329 F [-65 C to +65 C] Vibration MIL-STD-202, Method 204, Test Cond. Shock MIL-STD-202, Method 23, Test Cond. I Moisture Resistance MIL-STD- 202 Method 06 Salt Spray MIL-STD-202, Method 0, Test Cond Temperature Cycling MIL-STD- 202, Method 07, Test Cond. (except high temperature is +85 C) Note: ll data pertains to use with MIL-C-3902 specified cables only. Termination Tooling Integral Die Hand Tool Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

5 Military Qualified N Series Connectors MIL-C Ohm (Continued) Dual Crimp Plugs MIL-C-3902/0.750 [9.05] Max. L Max. Military MP Dim RG/U L Cable 0007 Weatherproof , 8, ,8, ,, Weatherproof Weatherproof , 9, 9, , 9, 9, 24 Crimp s MIL-C-3902/02 Military MP RG/U Cable , 8, [5.93] Max..937 L [49.9] Max. Crimp ulkhead s MIL-C-3902/ [22.48] Max L [53.98] Max..630/.645 [6/6.38].532/.543 [3.5/3.79] Maximum Panel Thickness [6.35] Recommended Panel Cutout 7RF Connectors Military MP RG/U Cable 0004 Weatherproof , 8, Weatherproof , 9, 9, 24 Crimp Right-ngle Plugs MIL-C-3902/ [.827] Max [.42] Max. L Max. Military MP Dim RG/U Part No L Cable , 8, Weatherproof , 8, , 9, 9, 24 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

6 Military Qualified NC Connectors MIL-C Ohm Product Facts Dual O Crimp Connectors are MIL-C-3902, Class II, Category or qualified ayonet lock coupling for quick connect/disconnect Various connectors available in 50 ohm versions Fully intermateable with comparable NC UG/U connectors Low VSWR Related Product Data Performance Specifications See chart below Material Specifications See chart below Military Category ll MIL type O crimp connectors are Category Type (MP Crimp Tooling), unless otherwise noted. Packaging ll connectors are packaged individually. The MP NC RF MIL-C connector family with bayonet locking coupling provides highly reliable, quick connect /disconnect coaxial connections. Exclusive O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. vailable in 50 ohm versions, these connectors feature numerous styles including cable plugs and jacks. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-3902 specifications Characteristics Category O Crimp (MIL Type) Electrical Impedance, Nom. (Ohms) 50 Working Voltage (Volts RMS) 500 Contact Resistance Inner:.5 (Milliohms) Outer: 2.0 Initial Insulation Resistance (Megohms) 5000 Dielectric Withstanding Voltage (VC) 500 Corona Level at 70,000 ft. (Volts, RMS) 375 RF Leakage, Max. (d) -55 at 2-3 GHz RF Insertion Loss, Max. (d) 0.2 at 3 GHz Frequency Range (GHz) 0-4 VSWR in Frequency Range Max..30 Mechanical Force to Engage (lbs. [N])/couple, 3.3/.2 (in-lbs. [N-M]) max. [3/2.5] Coupling Nut Retention, Min. N [lbs.] [00] Cable Retention, [60] N [lbs.] (RG58C/U) Durability (Cycles) 500 Jam Nut Mounting Torque, 25 Max. [N m] (in. lbs.) [2.8] Environmental Temperature Range, Operating (C ) -65 to +65 / -55 to Vibration MIL-STD-202 Method 204 Cond. Physical Shock MIL-STD-202 Method 23 Cond. G, 50 G s Thermal Shock MIL-STD-202 Method 07 Moisture Resistance MIL-STD-202 Method 06 Salt Spray MIL-STD-202 Method 0 Cond. Product Specification ssembled to cable with polytetrafluoroethylene dielectric. 2 ssembled to cable with polyethylene dielectric. Connector Component Connector Material Collar Outer Contact (Plug) Shell () Dielectric Center Contact (Plug) Center Contact () Gasket Ferrule Connector Primary Finishes Category & O Crimp (MIL Type) rass, QQ--626 Phos. ronze, QQ--750 rass, QQ--626 TEFLON, MIL-P-9468 rass, QQ--626 eryl. Copper, STM--643 QQ-C-530 Silicon Rubber, QQ-R-765 Copper, QQ-C-576 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Collar Outer Contacts (Plug & ) Center Contacts (Plug & ) Ferrule 2 Silver, QQ-S-365 right Nickel, QQ-N-290 Silver, QQ-S-365 right Nickel, QQ-N-290 Gold MIL-G Silver, QQ-S-365 Tin Lead, STM--545 If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 2 Ferrules with tin-lead finish are used with nickel plated outer contacts.

7 Military Qualified NC Connectors MIL-C Ohm (Continued) Dual Crimp Plugs MIL-C-3902/ [4.53] [.572] Max. L Max. Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dim Dies for Hand Category RG/U Hand Tool L Cable or Tool PRO-CRIMPER & 626 Pneu. dapter Head ,58,58,58C, or ,42,42,400, or , 40, 20, 62, , 62, 59, 59, 59 elden 929, 9209, Dual Crimp s MIL-C-3902/7.436 [.08] Max..20 [30.48] Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dies for Hand Category RG/U Hand Tool Cable or Tool PRO-CRIMPER & 626 Pneu. dapter Head , 58, 58, 58C or , 40, 20, 62, , 62, 59, elden 929, 9209, 9269 Dual Crimp ulkhead s MIL-C-3902/ [ ] H.625 [4.28] H = /6" across flats,.800 [20.32] Max. across points [ ] Recommended Panel Cutout Maximum Panel Thickness.25 [3.8] Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dies for Hand Category RG/U Hand Tool Cable or Tool PRO-CRIMPER & 626 Pneu. dapter Head , 58, 58, 58C or , 40, 20, 62, , 62, 59, 59, 59, elden 929, 9209, RF Connectors Field Serviceable ulkhead MIL-C-3902/ [ ] H H = /6" across flats,.800 [20.32] Max. across points Military MP Category RG/U Cable 24, 40, 20, 62, 62, 62, 59, 59, 59, elden 929, 9209, 9269, , 8824, Hi-Temp 62, Times PL-62, erk-tek TDC-59, TDC-62, 302, 7, 7, 7 Recommended Panel Cutout Maximum Panel Thickness.240 [6.0] Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: [30.48] [ ]

8 Military Qualified TNC Connectors MIL-C Ohm Product Facts Dual O Crimp Connectors are MIL-C-3902, Class II, Category qualified 50 ohm versions available Provides excellent performance at frequencies up to GHz Standard and weatherproof versions available Plugs available for high temperature cable Related Product Data Military Category ll crimp connectors are Category Type (MP Crimp Tooling), unless otherwise noted. Packaging ll connectors are packaged individually. The MP TNC RF MIL-C connector family, with 7/6-28 threaded couplings, provides low noise levels and optimum stability, and can withstand the shock and vibration often present in harsh environments. vailable in 50 ohm versions, these connectors feature cable plugs and jacks. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-3902 specifications. Characteristics Category O Crimp (MIL Type) Electrical Impedance, Nom. (Ohms) 50 Working Voltage (Volts RMS) 500 Contact Resistance Inner:.5 (Milliohms) Outer: 0.2 Initial Insulation Resistance (Megohms) 5000 Dielectric Withstanding Voltage (VC) 500 Corona Level at 70,000 ft. (Picocoulombs) 5 VRMS RF Leakage, Max. (d) 60 at 2-3 GHz RF Insertion Loss, Max. (d) 0.8 at 9 GHz Frequency Range (GHz) 0- VSWR in Frequency Range Max..3 Mechanical Force to Engage/Couple, 2/2 lbs. [N] [8.9/8.9] Coupling Nut Retention, 00 Min. lbs. [N] [444.8] Cable Retention, 60 [266.9] lbs. [N] RG58C/U Durability (Cycles) 500 Jam Nut Mounting Torque, 25 Max. lbs. [N m] [2.8] Environmental Temperature Range, Operating (C ) -65 to +65 / -55 to Vibration MIL-STD-202 Method 204 Cond. Physical Shock MIL-STD-202 Method 23 Cond. I, (00 G s) Thermal Shock MIL-STD-202 Method 07 Cond. Moisture Resistance MIL-STD-202 Method 06 Salt Spray MIL-STD-202 Method 0 Cond. Product Specification ssembled to cable with polytetrafluoroethylene dielectric. 2 ssembled to cable with polyethylene dielectric. Characteristics Connector Material Collar Outer Contact (Plug) Outer Contact () Dielectric Center Contact (Plug) Center Contact () Gasket Ferrule Connector Primary Finishes Collar Outer Contact (Plug & ) Center Contact (Plug & ) Ferrule Category O Crimp (MIL Type) rass, QQ--626 Phos. ronze, QQ--750 eryl. Copper, QQ-C-530 rass, QQ--626 TEFLON, MIL-P-9468 rass, QQ--626 eryl. Copper, STM--643 QQ-C-530 Silicon Rubber, QQ-R-765 Copper, QQ-C-576 Silver, QQ-S-365 right Nickel, QQ-N-290 Silver, QQ-S-365 Gold, MIL-G If several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specification Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

9 Military Qualified TNC Connectors MIL-C Ohm (Continued) Dual Crimp Plugs MIL-C-3902/26 (Weatherproof).640 [6.26]Max..375 [34.93] Military MP RG/U Interchangeable Dies Cable for PRO-CRIMPER Frame , 58, 58, 58C , 42, 42, , 40, 20, 62, 62, 62, 59, 59, 59, elden 929, 9209, ,55, 55, Crimp s MIL-C-3902/27 (Weatherproof) Crimp Panel MIL-C-3902/ [.43] Max..406 Max. [35.72] Military MP RG/U Interchangeable Dies Cable for PRO-CRIMPER Frame , 58, 58, 58C , 4, , 55, 55, , 42, 42, ±.004 [2.7 ±0.].44 [.2] Min. 7RF Connectors.703 Sq. [7.86] Max..375 [34.93].07 [2.7] Min. Clearance for 3-56 Screws (4 Holes).500 ±.004 [2.7 ±0.] Recommended Panel Cutout Military MP RG/U CERTI-CRIMP Cable Hand Tool with Integral Die , 58, 58, 58C Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

10 Military Qualified SM Connectors MIL-C-3902 Product Facts Performance to 8 GHz Uses industry standard crimp tools and processes Qualified to MIL-C-3902 Tyco Electronics offers a complete line of SM connectors. To satisfy the broad range of applications, SM connectors are available in a broad range of standard configurations including; straight and rightangle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in-series adapters, including connectors for semirigid cable and micro-strip applications. 700 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

11 Military Qualified SM Connectors MIL-C-3902 (Continued) Electrical Properties MIL Type Cable Contact Resistance Insulation Dielectric Corona Frequency RF High VSWR (milliohms max.) Resistance Withstanding Extinction RF Military Potential RF Max. (fghz) Center Outer (megohms Voltage Voltage at Transmission Slash Sheet at 5 MHz Leakage (GHz) Contact Contact min.) (Volts RMS) 70,000 Ft. Loss M7/ (V RMS) (d min.) (V RMS min.) (GHz) 93-RG , x sqrt (freq) RG22, 9-RG74, 94-RG79, 3-RG36, , x sqrt (freq) RG058, 60-RG42, 84-RG223, -RG303, , x sqrt (freq) MIL-C-3902/55 28-RG , x sqrt (freq) , , , x sqrt (freq) , , , , , x sqrt (freq) RG , x sqrt (freq) RG22, 9-RG74, 94-RG79, 3-RG36, , x sqrt (freq) RG058, 60-RG42, 84-RG223, -RG303, , x sqrt (freq) MIL-C-3902/56 28-RG , x sqrt (freq) , , x sqrt (freq) , , , , , x sqrt (freq) RG , x sqrt (freq) RG22, 9-RG74, 3-RG , x sqrt (freq) RG058, 60-RG42, 84-RG223, -RG303, , x sqrt (freq) MIL-C-3902/57, 28-RG400 /58 & / , x sqrt (freq) , , , x sqrt (freq) , , , , , x sqrt (freq) MIL-C-3902/60, & /6 N/ N/ 3 2 5, N/ 670 N/ 33-RG405, Thru Captive , x sqrt (freq) RG402, Thru Captive , x sqrt (freq) MIL-C-3902/79 33-RG405, Thru , x sqrt (freq) Non-Captive 30-RG402, Thru , x sqrt (freq) Non-Captive MIL-C-3902/80 33-RG405, Thru , x sqrt (freq) RG402, Thru , x sqrt (freq) RG405, Thru Captive , x sqrt (freq) RG402, Thru Captive , x sqrt (freq) MIL-C-3902/8, 33-RG405, /82 & /83 Thru , x sqrt (freq) Non-Captive 30-RG402, Thru , x sqrt (freq) Non-Captive MIL-C-3902/ N/ 2 5,000 N/ x sqrt (freq) MIL-C-3902/93 & /94 8 N/ 3 2 5, N/ 670 N/ 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

12 Military Qualified Mechanical and Environmental Properties SM Connectors MIL-C-3902 (Continued) MIL Type Force to Coupling Coupling Recommended Engage Nut Proof Cable Retention Insertion Withdrawal Connector Mating (in-lbs) Retention Torque Lbs. Min. In.-Ounces Durability Torque (lbs.) (in-lbs) (in lbs.) [0.9] 0 MIL-C-3902/55 2 max min [.70] 0.0 [2.79] N/ N/ N/ 500 cycles min [3.0] [0.9] 0 MIL-C-3902/56 2 max min [.70] 0.0 [2.79] N/ N/ N/ 500 cycles min [3.0] [0.9] 0 MIL-C-3902/57, /58 & /59 2 max. N/ N/ [.70] 0.0 [2.79] N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min [3.0] 40 MIL-C-3902/60, & /6 2 max. N/ N/ N/ N/ N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min. 7-0 MIL-C-3902/79 2 max min. 33-RG405, Thru RG402, Thru N/ N/ 500 cycles min. 7-0 MIL-C-3902/80 2 max min. 33-RG405, Thru RG402, Thru N/ N/ 500 cycles min RG405, MIL-C-3902/8, Thru max. N/ N/ 2 lbs. max. w/ oz. min. w/ /82 & /83 30-RG402, dia. pin.0355 dia. pin Thru cycles min. 7-0 MIL-C-3902/92 2 max min. N/ N/ N/ N/ N/ 00 cycles min. 7-0 MIL-C-3902/93 & /94 2 max. N/ N/ N/ N/ N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min. 7-0 Environmental MIL Type Vibration Shock Thermal Shock Corrosion (Salt Spray) Moisture Resistance MIL-C-3902/55 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except THI 85C with 5 min. of removal from humidity MIL-C-3902/56 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 85C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/57, Method 204 Method 23 Method 07 Method 0 No High Humidity /58 & /59 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 85C with 5 min. of removal from humidity MIL-STD-344 MIL-STD-344 MIL-STD-344 MIL-STD-344 MIL-STD-344, Method 002, Type II MIL-C-3902/60, Method 2005 Method 2004 Method 003 Method 00 No High Humidity & /6 Cond. IV Cond. G Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 200C with 5 min. of removal from humidity MIL-C-3902/79 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-C-3902/80 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/8, Method 204 Method 23 Method 07 Method 0 No High Humidity /82 & /83 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-C-3902/92 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/93 Method 204 Method 23 Method 07 Method 0 No High Humidity & /94 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 25C with 5 min. of removal from humidity 702 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

13 Military Qualified SM Connectors MIL-C-3902 For Flexible Cable MIL-C-3902/55 Plug.32 [7.92] [6.35] Outer Sleeve Plug.32 [7.92] Outer Sleeve Plug.32 [7.92] Crimp Sleeve.330 [8.38].72 [8.3] L Max..330 [8.38] L Max. Outline Outline [9.4].00 [25.40] Outline 3.32 [7.92] L Max. Outline 4 Military MP M/-COM 6 RG/U Outline Cat. Cable Dim. L [26.6] , [26.6] [26.6] , 42, [26.6] [26.6] [3.75] , 36 [3.75] [3.75] [3.75] [3.75] [3.75] [3.75] [34.93] , [34.93] , 88,.950 [24.3] 88, [34.93] [34.93] , 58,.030 [26.6] 58, 58C [34.93] , 42, 42,.030 [26.6] 400, elden [34.93] , 55,.030 [26.6] 55, [34.93] , 4,.030 [26.6] C 78 [3.75] C 74, 36 [3.75] C 22 [3.75] C 42, 223 [3.75] C 58, 303 [3.75] * [26.6] Military MP * No safety wire holes. Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Use Integral Die Crimp Tool Part Number Crimp Tool M22520/5-0 and M22520/5-35 Closure. lternate Crimp Tool M22520/0-0 and M22520/ Crimp Tool M22520/5-0 and M22520/5-4 Closure. lternate Crimp Tool M22520/0-0 and M22520/ Crimp Tool M22520/5-0 and M22520/5-9 Closure. lternate Crimp Tool M22520/0-0 and M22520/ indicates passivated stainless steel finish. See page 7003 for description of categories and pages for tooling (unless noted otherwise). M/-COM 6 RG/U Outline Cat. Cable Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Dim. L * , [26.6] * [26.6] * , 42, [26.6] * [26.6] * [3.75] * , 36 [3.75] * [3.75] * [3.75] * [3.75] * [3.75] * [3.75] * [34.93] * , [34.93] * [34.93] * [34.93] * [34.93] * [34.93] * [34.93] * C 78 [3.75] * C 74, 36 [3.75] * C 22 [3.75] * C 42, 223 [3.75] * C 58, 303 [3.75] D 42, 400 [3.75] * D 42, 400 [3.75] C 74, 36 * C 74, C 22 * C C 42, 223 * C 42, C 58, 303 * C 58, RF Connectors

14 Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/56.67 [7.0].54 [3.7].330 [8.38].63 [6.0].50 [2.7].330 [8.38].705 Max..750 [7.9] Max. [9.05] Plug Plug.32 [7.92] Outer Sleeve L Max..32 [7.92] L Max..32 [7.92] L Max..32 [7.92] L Max. Outer Sleeve Outline Outline 2 Outline 3 Outline 4 Military MP M/-COM 3 RG/U Outline Cat. Cable Dim. L [28.58] , [28.58] [28.58] , 42, [28.58] [28.58] [3.75] , 36 [3.75] [3.75] [3.75] [3.75] [3.75] [3.75] [34.93] , [34.93] , 88,.87 [30.5] 88, [34.93] [34.93] , 58, [3.75] 58, 58C [34.93] , 42, 42, [3.75] 400, elden [34.93] [34.93] C [34.93] C 74, [34.93] C [34.93] C 42, [34.93] * No safety wire holes. Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Use Integral Crimp Tool Part Number indicates passivated stainless steel finish. See page 7003 for description of categories and pages for tooling (unless noted otherwise). Military MP M/-COM 3 RG/U Outline Cat. Cable Dim. L C 58, [34.93] * [28.58] * , [28.58] * [28.58] * , 42, [28.58] * [28.58] * [3.75] * , 36 [3.75] * [3.75] * [3.75] * [3.75] * [3.75] * [3.75] * [34.93] * , [34.93] * [34.93] * [34.93] * [34.93] * [34.93] * [34.93] * C [34.93] * C 74, [34.93] * C [34.93] * C 42, [34.93] * C 58, [34.93] D 42, [34.93] * D 42, [34.93] 704 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

15 Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/57.32 [7.92] [6.35] Outer Sleeve.32 [7.92] Outer Sleeve.59 [5.0] L Max. [6.35] L Max..53 [3.5] Outline Outline 2 Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L [24.38] , [24.38] [24.38] , 42, [24.38] [24.38] [32.3] , [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L , [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] C [32.3] C 74, [32.3] C [32.3] C 42, [32.3] C 58, [32.3] D 42, [32.3] MIL-C-3902/58.02 [2.59] 4 Plcs..500 Sq. [2.70].340 [8.64] Typ..385 [9.78].065 [.65] L Max. Outer Sleeve.375 [9.53] L Max..065 [.65] [6.35] Outer Sleeve 7RF Connectors Outline 3 Outline 4 Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L [24.38] , [24.38] [24.38] , 42, [24.38] [24.38] [32.3] , [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 2 RG/U Outline Cat. Cable Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Dim. L , [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] C [28.58] C 74, [28.58] C [28.58] C 42, [28.58] C 58, [28.58] D 42, [28.58] 705

16 Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/ [ ] O-Ring Lockwasher.32 [7.92].437 [.0] [6.35] Outer Sleeve O-Ring Lockwasher.32 [7.92].437 [.0] [6.35] Outer Sleeve O-Ring Lockwasher.32 [7.92] Crimp Sleeve [ ] Recommended Mounting Hole [ ] Panel.450 [.43] L Max [ ] Panel.450 [.43] L Max. Mtg. Nut [ ] Panel.40 [0.44].93 Max. [23.62] Outline Outline 2 Outline 3 Military MP M/-COM 5 RG/U Outline Cat. Cable Dim. L [24.38] , [24.38] [24.38] , 42, [24.38] [24.38] [32.3] , [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] [32.3] , [32.3] [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Crimp tool M22520/5-0 and M22520/5-35 Closure. lternate crimp tool M22520/0-0 and M22520/ Crimp tool M22520/5-0 and M22520/5-4 Closure. lternate crimp tool M22520/0-0 and M22520/ Crimp tool M22520/5-0 and M22520/5-9 Closure. lternate crimp tool M22520/0-0 and M22520/ indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling (unless noted otherwise). Military MP M/-COM 5 RG/U Outline Cat. Cable Dim. L [32.3] [32.3] [32.3] [32.3] C [28.58] C 74, [28.58] C [28.58] C 42, [28.58] C 58, [28.58] D 42, [32.3] C 74, C C 42, C 58, Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

17 Military Qualified SM Connectors MIL-C-3902 Panel Mount MIL-C-3902/60.02 [2.59] 4 Plcs..340 [8.64] Typ..500 Sq. [2.70].375 [9.52].58 [4.7].03 [0.78].050 [.27].065 [.65].223 [5.66].02 [2.59] 2 Plcs..48 [2.22].625 [5.88] Outline Outline [.65].375 [9.53].58 [4.7].035 [0.89].050 [.27].62 [4.].035 [0.89] Max. Military MP M/-COM Outline indicates passivated stainless steel finish. MIL-C-3902/ [ ] O-Ring Lockwasher.32 [7.92].437 [.0].03 [0.79].437 [.0] O-Ring Lockwasher.32 [7.92].03 [0.79] [ ] Typical Recommended Mounting Hole [ ] Panel.500 [2.70].78 Max. [8.24] Outline [.27] [ ] Panel.30 [7.87] Military MP M/-COM Outline [3.97].68 [7.3] Outline [.27] 7RF Connectors -92 indicates passivated stainless steel finish. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

18 Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable MIL-C-3902/79.32 [7.92] Plug.32 [7.92] Plug.28 [5.54] Plug.32 [7.92].32 [7.92] Plug.330 [8.38].44 [.2] Outline.568 Max. [4.43].76 [9.3] Outline 2 Outline Max. [4.07] Outline 4 Military MP M/-COM 4 RG/U Outline Category Cable E E 402 * * * * * MIL-C-3902/80 Plug.330 [8.38].67 [7.0].54 [3.7].32 [7.92] Outer Sleeve Outline 5 Military MP M/-COM 2 RG/U Outline Category Cable E E E E 402 * * * No safety wire holes. Use Hand Tool Kit Part Number which includes Die Set Part Number and Locator Part Number indicates passivated stainless steel finish. See page 7003 for description of categories and pages for tooling 708 (unless noted otherwise). Military MP M/-COM 4 RG/U Outline Category Cable * * * * * E 405 * E F F F 402 * F 405 * F 405 * F 402 * F F 405 * No safety wire holes. Low profile version; overall length.393 [9.98] max. 2 OSCC solderless compression crimp version. 3 Use Hand Tool Kit Part Number which includes Die Set Part Number and Locator Part Number indicates passivated stainless steel finish. See page 7003 for description of categories and pages for tooling (unless noted otherwise). Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: [7.75].520 [3.2] Max..32 [7.92].670 Max. [7.02] Outline [4.07] Max. Military MP M/-COM 2 RG/U Outline Category Cable * * * E 405 * E 402 * E 405 * E F 405 * F F 402

19 Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable (Continued) MIL-C-3902/8 [6.35].32 [7.92] [6.35].25 [3.8] Min..500 [2.70].235 [5.97].73 [8.].25 [3.8] Min..63 [6.03] Max..28 [5.54] Outline Outline 2 Outline 3 Military MP M/-COM 2 RG/U Outline Category Cable OSCC solderless compression crimp version indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 2 RG/U Outline Category Cable E E E E F F 402 MIL-C-3902/82.02 [2.59] 4 Plcs..30 [7.87].340 [8.64] Typ..500 Sq. [2.70].065 [.65].375 [9.53].565 Max. [4.35] Outline [.65].375 [9.53].63 Max. [6.03].28 [5.54].065 [.65].375 [9.53].73 [8.] Outline 5 Outline 6.32 [7.92] 7RF Connectors Military MP M/-COM 2 RG/U Outline Category Cable OSCC solderless compression crimp version indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 2 RG/U Outline Category Cable E E E E F F 402 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

20 Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable (Continued) MIL-C-3902/ [ ] O-Ring Lockwasher.32 [7.92].437 [.0] O-Ring Lockwasher.32 [7.92].437 [.0] cross [6.35] Flats O-Ring Lockwasher.32 [7.92].437 [.0] [ ] Recommended Mounting Hole [ ] Panel.45 [0.54].500 [2.70].75 [9.0] Outline [ ] Panel.450 [.43].850 Max. [2.59] [ ] Panel.45 [0.54].500 [2.70].652 Max. 2 [6.56] Outline 2 Outline 3.28 [5.54] Military MP M/-COM 3 RG/U Outline Category Cable OSCC Solderless Compression Crimp version. 2 Category F Only: Overall Length;.620 [5.75] Max indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 3 RG/U Outline Category Cable E E E E , F , F 402 MIL-C-3902/92 Plug.32 [7.92] Plug.32 [7.92].32 [7.92].33 [8.38] [ ].4 [0.4].28 [5.54].368 Max. [9.35] Outline 4 Outline 5 Outline 6 Military MP M/-COM 3 RG/U Outline Category Cable * * * No safety wire holes. OSCC Solderless Compression Crimp version. 2 Use Hand Tool Kit Part Number which includes Die Set Part Number and Locator Part Number indicates passivated stainless steel finish. See page 7003 for description of categories and pages for tooling. Military MP M/-COM 3 RG/U Outline Category Cable * F 402 * F F Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

21 Military Qualified SM Connectors MIL-C-3902 Printed Circuit Mount MIL-C-3902/ [.65].375 [9.53].050 [.27].200 [5.08] Typ. [6.35] Sq. Outline.040 Sq. Typ. [.02] 4 Plcs. Military MP M/-COM Outline indicates gold plated finish. Dimension MIL-C-3902/94 [6.35].583 [4.8].458 [.63].380 [9.65] Max..050 [.27] Outline 2 [6.35] Sq..040 Sq. Typ. [.02] 4 Plcs..200 [5.08] Typ. Military MP M/-COM Outline indicates gold plated finish. Dimension In-Series dapters MIL MIL Plug.635 Max. [6.3].50 Max. [2.95].330 [8.38].585 [4.86].459 [.66] Outline.32 [7.92].4.44 [ ].375 [9.53].32 32, [7.92] UNEF-2 Thd [ ] [ ] Panel Recommended Mounting Hole.550 [3.97].875 [22.23] Outline 2 Lockwasher Gasket.325 [8.26].090 [2.29].500 [2.70] 7RF Connectors.32 [7.92] Typ. Plug.28 cross [5.54] Flats Plug.25 [3.8].02 [2.59] 4 Plcs..25 [3.8] Min..880 [22.35] Outline [2.70] Outline 4.28 cross [5.54] Flats Military MP M/-COM Outline / / / / */ / * No safety wire holes. -92 indicates passivated stainless steel finish..065 [.65].375 [9.53].720 [8.29] Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: [8.76] Outline [8.64] Typ..500 Sq. [2.70] 702

22 Military Qualified SM Receptacles MIL-C-8357 Panel Mount MIL-C-8357/.065 [.65].375 [9.53] [2.59] 2 Plcs. Tab Width.48 [2.22] [ ] [ ].02.2 [2.84].24 [6.].223 [5.66].625 [5.88].065 [.65].375 [9.53].02 [2.59] 4 Plcs. Tab Width [ ] [ ].70 [4.32] Typ..50 Sq. [2.95] Max..340 Typ. [8.64] Outline Outline 2 Military MP M/-COM Outline Dimension.020 ± ± ± ± ± ± ± ±.025 Military MP M/-COM Outline Dimension.020 ± ± ± ± ± ± ± ± indicates passivated stainless steel finish. -90 indicates gold plated finish. MIL-C-8357/2 Plug.32 [7.92] Ref. Plane.065 [.65].390 [9.9].528 [3.4] Max..02 [2.59] 2 Plcs. Tab Width [ ].30 [3.30].00 ±.00 [2.54 ± 0.25].24 [6.].260 [6.60].48 [2.22].625 [5.88].02 [2.59] 4 Plcs Typ. [4.32] [7.92] Tab Width Plug.340 [8.64] Typ [ ] Ref. Plane.065 [.65].390 [9.9].528 [3.4] Max..00 ±.00 [2.54 ± 0.25].50 Sq. [2.95] Max. Outline 3 Outline 4 Military MP M/-COM Outline Dimension.020 ± ± ± ± ± ± ± ±.025 Military MP M/-COM Outline Dimension.020 ± ± ± ± ± ± ± ± indicates passivated stainless steel finish. -90 indicates gold plated finish Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

23 Military Qualified SM Receptacles MIL-C-8357 Panel Mount (Continued) MIL-C-8357/3.065 [.65].375 [9.53].050 ±.00 [.27 ± 0.03] Slot Width.050 ±.00 [.27 ± 0.25] Slot Width.065 [.65].375 [9.53].630 ±.00 [6.00 ± 0.25].050 ±.00 [.27 ± 0.03].62 ±.002 [4. ± 0.05].00 ±.005 [2.54 ± 0.3].035 ±.00 [0.89 ± 0.25].02 [2.59] 2 Plcs..223 [5.66].24 [6.].2 [2.84].48 [2.22].625 [5.88] Outline Outline 2.02 [2.59] 4 Plcs..70 Slot Typ. [4.32] Width.340 [8.64] Typ..065 [.65].375 [9.53].050 ±.00 [.27 ± 0.25].050 ±.00 [.27 ± 0.25] Outline 3.50 Sq. [2.95] Max. Military MP M/-COM Outline Dimension / / / / / / / / / / / / ± ±0.05 Military MP M/-COM Outline Dimension / / / / / / / / / / / / ± ±0.05 7RF Connectors -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

24 Military Qualified SM Receptacles MIL-C-8357 Panel Mount (Continued) MIL-C-8357/4.065 [.65].375 [9.53].080 ±.00 [27.43 ± 0.25].590 ±.00 [4.99 ± 0.25].050 ±.00 [.27 ± 0.03].62 ±.002 [4. ± 0.05].00 ±.002 [0.25 ± 0.05].085 ±.002 [2.6 ± 0.05].065 [.65].050 ±.00 [.27 ± 0.25].375 [9.53].02 [2.59] 4 Plcs..50 Max. [2.95] Sq..340 Typ. [8.64].70 [4.32] Typ. Outline Outline 2.00 ±.002 [0.25 ± 0.05].085 ±.002 [2.6 ± 0.05].065 [.65].050 ±.00 [.27 ± 0.25].375 [9.53] Outline [5.66].02 [2.59] 4 Plcs..24 [6.].2 [2.84].48 [2.22].625 [5.88] Military MP M/-COM Outline Dimension ± ± ± ± ± ± ± ± N/ -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. MIL-C-8357/5 Plug Ref. Plane.065 [.65].390 [9.9].528 Max. [3.4].997 Ref. [25.32] Military MP M/-COM Outline Dimension ± ± ± ± ± ± ± ± N/.62 ±.002 [4. ± 0.05].050 ±.00 [.27 ± 0.03].330 ±.00 [8.38 ± 0.25].490 ±.00 [2.45 ± 0.25] Outline 4.02 [2.59] 4 Plcs..50 Max. [2.95] Sq..70 Typ. [4.3].340 Typ. [8.64] 7024 Military MP M/-COM Outline indicates passivated stainless steel finish. -90 indicates gold plated finish. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

25 Military Qualified SM Receptacles MIL-C-8357 Surface Launch MIL-C-8357/6.085 [2.6].375 [9.53].050 ±.00 [.27 ± 0.03].072 ±.004 [.83 ± 0.0].00 ±.002 [0.25 ± 0.05].438 [.3] Outline.570 [4.48] Max..086 [2.8]-56, UNC-2 8 Plcs. Military MP M/-COM Outline indicates passivated stainless steel finish. -90 indicates gold plated finish. Dimension.060 ± ± ± ± ± ± ± ±0.08 MIL-C-8357/7 Ref. Plane Plug.085 [2.6].390 [9.9].528 Max. [3.4].050 ±.00 [.27 ± 0.03].072 ±.004 [.83 ± 0.0].00 ±.002 [0.25 ± 0.05] Outline [4.48] Max..086 [2.8]-56, UNC-2 8 Places.483 [.3] Military MP M/-COM Outline indicates passivated stainless steel finish. -90 indicates gold plated finish. Dimension.060 ± ± ± ± ± ± ± ±0.08 MIL-C-8357/8.480 Max. [2.9].340 [8.63].085 [2.6].00 ±.002 [0.25 ± 0.05].072 ±.004 [.83 ± 0.0].05 [0.38] Min. Mounting Plane.00 Max. [2.54].570 [4.48] Max..438 [.3] 7RF Connectors.475 [2.07] Max. See Detail.050 ±.00 [.27 ± 0.03] [ ].05 Max..086 [2.8]-56, [0.38] Flat UNC-2 8 Places Detail Transition End Outline 3 Military MP M/-COM Dimension Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Outline indicates passivated stainless steel finish. -90 indicates gold plated finish..060 ± ± ± ± ± ± ± ±

26 Military Qualified SM Receptacles MIL-C-8357 End Launch MIL-C-8357/9.090 ±.003 Thru [2.29 ± 0.08] 2 Plcs..562 [4.27].375 [9.53] SC.230 [5.84].375 [9.53].09 [2.77] SC Mounting Hole Pattern Outline.375 [9.53].60 ±.00 [5.27 ± 0.25] Thick x [ ].00 ±.00 [2.54 ± 0.25] Long x Tab Width.090 ±.003 Thru [2.29 ± 0.08] 2 Plcs..230 [5.84] [ ].767 [9.48].580 [4.73] SC.00 [0.25].09 SC [2.77] Mounting Hole Pattern.375 [9.53].60 ±.00 [5.27 ± 0.25].375 [9.53] [ ] Thick x.00 ±.00 [2.54 ± 0.25] Long x.050 ±.00 Tab Width [.27 ± 0.03] Outline 2 Military MP M/-COM Dimension Dimension Outline ± ± ± ± ± ± N/ N/ ± ± ± ± ± ± N/ N/ -92 indicates passivated stainless steel finish. -90 indicates gold plated finish Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

27 Military Qualified SM Receptacles MIL-C-8357 Field Replaceable Launchers MIL-C-8357/0.375 [9.53].02 [2.59] 2 Plcs..065 ±.00 [.65 ± 0.25].223 ±.00 [5.66 ± 0.25].2 [2.84].375 [9.53].065 ±.00 [.65 ± 0.25].50 Max. Sq. [2.95].480 [2.27].2405 [6.09].625 ±.00 [5.88 ± 0.25].70 [4.32] Typ..340 Typ. [8.63].02 [2.59] 4 Plcs. Outline Outline 2.00 ±.00 [2.54 ± 0.25].075 [.9].05 Max. [0.38] Flat.05 [0.38] Min x ±.002 [ ] [± 0.05] [ ] Transition Pin Detail Military MP M/-COM Dimension Outline ± ± ± ± ± ± ± ± ± ± indicates passivated stainless steel finish. -90 indicates gold plated finish..050 ± ± ± ± ± ±0.05 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

28 DSCC pproved SM Connectors for Semi-Rigid Cable Captured Center Contact.32 [7.92] Plug.223 [5.66] [2.22] [5.88].330 [8.38].440 [.7].065 [.65].375 [9.53].500 [2.70] Outline 66 Outline [2.59] 2 Plcs..330 [8.38].680 [7.27].540 [3.72] Plug.32 [7.92].30 [7.87] Outline 68 DSCC M/-COM ssembly Part Number Part Number Outline Dim. Procedure 408- RG/U Cable MP Part Number 8449SSG SSG SSG SSG SSG SSG SSG SSG SSG SSG * Defense Electronics Supply Center, Dayton, Ohio Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

29 DSCC pproved SSM Connectors for Semi-Rigid Cable and Flexible Cable Non-Captured Center Contact [6.35].72 Min. [4.37] O-Ring Lock Washer [6.35].375 [9.53] [6.35] OSSM Plug.330 [8.38].467 [.86].88 Min. [4.78] OSSM Recommended Mounting Hole.450 [.43].555 [4.0].690 Max. [7.53].25 Max. [3.8] Panel OSSM Plug.330 [8.38].460 [.68].550 [3.97].20 [5.33] Outline 69 Outline 70 Outline 7 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 866ZSG ZSG ZSG Captured Center Contact OSSM Plug.330 [8.38].600 [5.24] [6.35] Typ..062 Max. [26.97].330 [8.38] OSSM Plug [6.35].500 [2.70].460 [.68].490 [2.45].900 [22.86] Max. 7RF Connectors.28 [32.54] Max. Outline 72 Outline 73 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 869ZSG , 36, ZSG , 36, * Defense Electronics Supply Center, Dayton, Ohio Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

30 DSCC pproved M lindmate Connectors for Semi-Rigid and Flexible Cable.280 [7.].560 ±.004 [4.22 ± 0.0] 2-56 UNC-2 Thd. 2 Plcs..020 Min. [0.5] Radial Float OSP [ ] Recommended Mounting Hole.25 Max. [3.8] Panel.372 [9.45] Mounting Surface.065 [.65].70 [8.03].060 Min. [.52] xial Float.02 [2.59] 2 Plcs..560 [4.22].375 [9.53].750 [9.05].240 ±.00 [6.0 ± 0.03] OSP Plug.690 [7.53].477 [.35].065 [.65].437 [.0] O-Ring [ ].500 [7.92].25 Max. [2.70] Lockwasher [3.8] Panel Max. Recommended Mounting Surface Mounting Hole Outline 74 Outline Max. [34.93] 2-56 UNC-2 Thd. 2 Plcs..280 [7.].560 ±.004 [4.22 ± 0.0].25 Max. [3.8] Panel.020 Min. [0.5] Radial Float [ ] Recommended Mounting Hole.372 [9.45] OSP Mounting Surface.065 [.65].875 ±.020 [22.23 ± 0.5].400 [35.56] Max..060 Min. [.52] xial Float.02 [2.59] 2 Plcs..560 [4.22].380 [9.65].750 [9.05] [ ].240 ±.00 [6.0 ± 0.03] OSP Plug Recommended Mounting Hole O-Ring.32 [7.92] Lockwasher.833 ±.020 [2.6 ± 0.5].477 [.35].065 [.65].32 [7.92].25 Max. [3.8] Panel Mounting Surface Outline 76 Outline 77 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 8507ZSG ZSG ZSG ZSG ZSG , 55, 87, 88, ZSG , 42, 223, ZSG , 74, 87, 88, ZSG , 42, 223, Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. 2 Finish: Housing that is soldered to cable outer conductor is gold plated. 3 Finish: Passivated stainless steel. For gold plate, change the Part Number suffix from -02 to -00. * Defense Electronics Supply Center, Dayton, Ohio 7030 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

31 DSCC pproved P Microminiature Push-On Coaxial Connectors for Semi-Rigid Cable Straight Cable Solder ttachment [6.4].35 Max. [3.4].33 [3.4] Right ngle Cable Solder ttachment EMI Ring nti-rock Ring DSCC M/-COM Part Number Part Number RG/U Cable MP Part Number 94008ZCG Semi-Rigid ZCG RG [4.] Max..230 [5.8] Max. nti-rock Ring EMI Ring.35 [3.4] Max. DSCC M/-COM Part Number Part Number RG/U Cable MP Part Number 94008ZCG Semi-Rigid ZCG RG to dapter (ullet).2525/.2555 [6.4 / 6.5].33 [3.4].35 Max. [3.4] DSCC M/-COM RG/U MP Part Number Part Number Cable Part Number 94007ZCG RF Connectors Shroud 2-Hole Flange Surface Mount C.20 [3.0].65 [4.2] D 2 Plcs..045 [.] DSCC M/-COM Dimension Dimension Dimension Dimension MP C D Part Number 94007ZSP ZSP ZSP Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

32 DSCC pproved etween Series dapters TNC.437 [.0].87 cc. [4.75] Panel See Part Numbers TNC EMI Gasket Lockwasher.562 [4.27].093 [2.36].000 [25.40].32 [7.92].500 [2.70] Typ..687 [7.45] Sq..30 [33.27] Max [6.35] Panel.45 [0.54] Flat.656 [6.66] Outline 78 Outline 79 Type N Plug Plug.32 [7.92] Type N Plug.32 [7.92].668 [6.97].28 [32.54].562 [4.27].828 [2.03].279 [32.49].687 [7.45] Outline 80 Outline 8 Type N Type N Plug.232 [3.29] Outline [7.45].668 [6.97].28 [32.54].562 [4.27].828 [2.03] Outline 83 DSCC M/-COM Part Number Part Number Outline Description MP Part Number 85084FP SM to TNC FP SM to TNC FP SM to TNC SP SM Plug to Type N Plug SP SM Plug to Type N SP SM to Type N SP TNC Plug to SM [3.20] Typ. (4 Plcs.) 2 Tapped holes to accommodate 3-56 UNF mounting screws * Defense Electronics Supply Center, Dayton, Ohio Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

33 DSCC pproved etween Series dapters (Continued) Gasket Type N.630 [6.00] Max. See Part Numbers Mounting Nut UNEF -2 Thd. Type N.53 cross [3.49] Flats Lockwasher.87 Max. [4.75] Panel.234 [3.34].79 Typ. [8.26].000 [25.40] Sq. Max. [6.35] Panel.867 [22.02].232 [3.29].867 [22.02].750 [9.05] Outline 83 Outline 84 Type N See Part Numbers.630 [6.00] Max..87 Max. [4.75] Panel.279 [32.49] Outline [8.26] Typ..000 [25.40] Sq..32 [7.92] DSCC M/-COM Part Number Part Number Outline Description MP Part Number FP SM to Type N FP SM to Type N FP SM to Type N FP SM Plug to Type N FP SM Plug to Type N FP SM to Type N FP SM to Type N [3.20] Typ. (4 Plcs.) 2 Tapped holes to accommodate 3-56 UNF mounting screws. 7RF Connectors * Defense Electronics Supply Center, Dayton, Ohio Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

34 Coaxial Cable Termination One-Step NC/TNC Connectors Product Facts Easy, quick installation Outstanding cable-retention force Solder-solder connection type (center conductor and braid) One-step termination for easy, quick installation and lower installed cost Exceptional cable retention force to withstand high vibration and frequent mates and unmates Fully soldered center conductor and braid Excellent built-in strain relief against vibration and excessive handling Long-term reliability Controlled soldering termination Use with standard RG/U cables and Raychem Cheminax cables Three product sizes to accommodate a wide range of cables Meets performance requirements of MIL-C-3902 up to 2.8 GHz pplications One-Step NC/TNC connectors are single-piece assemblies for terminating the center conductor and the braid of a broad range of coaxial cables. The connectors are fully intermateable with MIL-C-3902 connectors and are available in 50-ohm and 75-ohm versions. Specifications Installation For proper installation of these devices, the correct heating tool and reflector Raychem attachment must be used. Refer to Raychem installation procedure R-5 ny one of the following Raychem RPIP for detailed instructions. heating tools is recommended: Steinel Model HL802E CV METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK:

35 Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) Product Options and Part Numbering System Connector Style Dash No. Style Connector Type RXX-XX-X-XX -XX TNC NC 24.5 Max. [.965] 24.5 max. [.965] -00 Straight plug 33.5 Max. [.32] 3.5 max. [.23] -0 Right-angle plug 28 [.09] 28 [.09] Male 25.4 max. [.0] 25.4 Max. [.0] -02 Straight bulkhead jack 25.4 max. [.0] 25.4 Max. [.0] -03 Straight jack 25.4 Max. [.0] 25.4 Max. [.0] Female -04 Straight panel jack Connector size L = Large M = Medium S = Small 50 = 50 ohms 75 = 75 ohms 4 x M2.5 x x M2.5 x RF Connectors D = Nickel-plated brass body, gold-plated brass pin = NC T= TNC Example: RD-50-L-00 is a NC connector, 50 ohms, large size, with straight plug body. METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK:

36 Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) Product Characteristics Solder Transition Center Contact Dielectric Insulator Connector ody Insulation Sleeve Shield Insulation Sleeve and Solder Material Center contact Dielectric insulator Transition Connector body Solder and flux raided shield Insulation sleeve Strain relief/sealing sleeve Typical Performance Dielectric withstand voltage Insulation resistance Temperature rating Contact resistance-straight Contact resistance right-angle Cable retention force Voltage rating Connector durability Electrical Performance Nominal impedance Frequency range Gold-plated beryllium copper (female) Gold-plated brass (male) PTFE Silver-plated brass Nickel-plated brass Sn63Pb37, RM flux Tin-plated copper wire per STM 3 Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black 500 V 5000 megohms -55 C to 50 C [-67 F to 302 F] Inner =.5 milliohms, outer =.0 milliohm Inner = 2.5 milliohms, outer =.5 milliohms 295N (66 lb) to 822N (96 lb) 500 V RMS 500 mating cycles minimum 50 and 75 ohms Up to 2.8 GHz Part Selection Process. From Product Options and Dimensions on page 7035, select the connector style you need (NC or TNC, plug or jack, male or female contacts). 2. From the tables that follow, find the appropriate table for the connector style you selected. 3. From the appropriate table, select the connector part number based on the RG cable type or Raychem cable part number. For cable types not shown use the cable dimensions. Note: The cable dimensions in each table are keyed to the diagram below. D E F G 7036 METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK:

37 Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) NC Coaxial Connectors Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) NC Straight Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.26] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] NC Right-ngle Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] NC Straight ulkhead s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] NC Straight s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] NC Straight Panel s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG o RG-44, RG-26 [ ] [.6.375] [.287] [.00] METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK: Part No. RD-50-S-00 RD-50-M-00 RD-50-L-00 RD-75-S-00 RD-75-M-00 RD-75-L-00 RD-50-S-0 RD-50-M-0 RD-50-L-0 RD-75-S-0 RD-75-M-0 RD-75-L-0 RD-50-S-02 RD-50-M-02 RD-50-L-02 RD-75-S-02 RD-75-M-02 RD-75-L-02 RD-50-S-03 RD-50-M-03 RD-50-L-03 RD-75-S-03 RD-75-M-03 RD-75-L-03 RD-50-S-04 RD-50-M-04 RD-50-L-04 RD-75-S-04 RD-75-M-04 RD-75-L RF Connectors

38 Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) TNC Coaxial Connectors 2.7 [.5] = = RD-XX-X-04 RTD-XX-X [.5] Panel thickness: 3.2 [.25] max. = =.2 [.44] 3 [.2] RD-XX-X -02 RTD-XX-X [.8] min. 2 [.47] 8 [.7] min. 2.9 [.5] Hole Pattern for Panel-Mounted Products Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) TNC Straight ulkhead s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] TNC Right-ngle Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] Part No. RTD-50-S-02 RTD-50-M-02 RTD-50-L-02 RTD-75-S-02 RTD-75-M-02 RTD-75-L-02 RTD-50-S-0 RTD-50-M-0 RTD-50-L-0 RTD-75-S-0 RTD-75-M-0 RTD-75-L METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK:

39 Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) TNC Coaxial Connectors Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) TNC Straight Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] TNC Straight s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] TNC Straight Panel s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, , RG-96,RG [ ] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, RG-303, RG [ ] [ ] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, RG-225, RG-24 [ ] [.6.375] [.287] [.00] 75 RG-79, RG [ ] [.035.8] [.060] [.025] , [ ] [ ] [.46] [.050] 75 RG-6, RG-, RG-2, RG RG-44, RG-26 [ ] [.6.375] [.287] [.00] Part No. RTD-50-S-00 RTD-50-M-00 RTD-50-L-00 RTD-75-S-00 RTD-75-M-00 RTD-75-L-00 RTD-50-S-03 RTD-50-M-03 RTD-50-L-03 RTD-75-S-03 RTD-75-M-03 RTD-75-L-03 RTD-50-S-04 RTD-50-M-04 RTD-50-L-04 RTD-75-S-04 RTD-75-M-04 RTD-75-L-04 7RF Connectors METRIC Dimensions are millimeters over inches Catalog Dimensions are in millimeters Dimensions are shown for US: South merica: Revised 5-03 and inches unless otherwise reference purposes only. Canada: Japan: specified. Values in brackets Specifications subject Mexico: Singapore: are U.S. equivalents. to change. C. merica: UK:

40 P Microminiature Push-On Coaxial Connectors Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For P etween Series dapters, see page P microminiature push-on coaxial connectors provide solutions for today s modular designs with denser packaging requirements. The extremely small size of the P offers a versatile solution for high density packaging allowing connector center-to-center spacing of 0.7 [4.32]. The push-on interface facilitates easier assembly and test with a positive snap-in feature to indicate a fully mated connection. The rugged P interface can better withstand harsh environments of mechanical shock and vibration, typically found in military or aerospace related applications. This P connector interface is the standard used by Defense Electronics Supply Center (DSCC) to generate the SMP push-on connector series. P Shroud and -to- dapter ssembly P connectors can be your design solution for mechanical packaging and frequency response. The P interface provides 0.020" of radial misalignment for critical blindmate applications. Mating forces are strictly controlled for reliable connections per mated pair or when simultaneously mating multiple connectors. Cable jacks include an anti-rocking ring for reliable mechanical performance for harsh operating environments. P connectors offer enhanced broadband VSWR performance of VSWR.50:.40:.30:.20:.0:.5: max thru 26GHz and.40: max thru 40GHz. Standard design P configurations include cable connectors, straight and right-angle, for and semi-rigid cable, full detent, limited detent and smooth bore mating shrouds that can be bulkhead or flange mounted and glass feedthroughs for coax to circuit launchers. In-series adapters for module-to-module intermating and between series adapters for integrating or testing systems or components parameters GHz Typical VSWR for P -to- dapter Part Numbers and Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

41 P Microminiature Push-On Coaxial Connectors Introduction (Continued) Specifications General Materials and Finishes Housings and Center Contacts Dielectric Shrouds Hermetic Seal Electrical Frequency Range VSWR Voltage Rating Insertion Loss Insulation Resistance Dielectric Withstanding Voltage RF High Potential Impedance RF Leakage Contact Resistance eryllium Copper per STM--96; gold plate over nickel plate PTFE Fluorocarbon per STM-D-457 Stainless steel per STM-582 Type 303; passivate per STM-380 Glass bead dc GHz.0: Maximum dc GHz.5: Maximum GHz.40: Maximum GHz 335 Vrms maximum at sea level 0.0 f (GHz) maximum 5000 megohms minimum 500 volts (VRMS minimum) 325 volts (VRMS 5 MHz 50 ohms nominal -80d to 3 GHz, -65d from 3 to 26.5 d minimum Initial center contact 6.0 milliohms maximum Outer contact 2.0 milliohms maximum Mechanical Durability 00 mating cycles minimum Radial Misalignment ±0.020 minimum xial Misalignment.000/.00 Force to Engage full detent 5.0 lbs. maximum half detent 0.0 lbs. maximum smooth bore 2.0 lbs. maximum Force to Disengage full detent 5.0 lbs. minimum half detent 2.0 lbs. minimum smooth bore 0.5 lbs. minimum Center Contact Retention.5 lbs. minimum axial force Environmental Operating Temperature -85 F to +329 F [-65 C to +65 C] Vibration per mil-std-202, method 204, test condition D Shock per mil-std-202, method 23, test condition I Thermal Shock per mil-std-202, method 07, test condition Moisture Resistance per MIL-STD-202 method 06, except step 7b shall be omitted. Resistance shall be 200 megohms within 5 minutes after removal from humidity. 7RF Connectors Interface Dimensions Shroud EMI Ring.32 [3.40] Min. Full Detent.0 ±.002 [2.80 ±.050].45 [3.70] Max..35 [3.43] Max..42 ±.003 [8.60 ±.076] nti-rock Ring ullet.2 [2.80] Min. Smooth ore.35 [3.43] Max..25 ±.002 [3.20 ±.050] Note: The U.S. Government (DSCC) has determined that the above specified interface dimensions are interchangeable and intermateble with Gilbert GPO Series RF Connectors. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

42 P Microminiature Push-On Coaxial Connectors s Straight Cable, Solder ttachment [6.40].33 [3.40] Max..33 [3.40] EMI Ring nti-rock Ring Cable M/-COM (Ref. only) Part No..047 Semi-Rigid Semi-Rigid (RG-405) Right-ngle Cable, Solder ttachment.6 [4.0] Max..230 [5.80] Max. EMI Ring nti-rock Ring.35 [3.40] Max. Cable Dim. Dim. M/-COM (Ref. only) Part No..047 Semi-Rigid Semi-Rigid (RG-405) to dapter (ullet) [ ].33 [3.40].35 [3.40] Max. M/-COM Part (Ref. only) No Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

43 P Microminiature Push-On Coaxial Connectors Shrouds Shroud Threaded.20 [3.00].60 [4.0] Max. Description M/-COM (Ref. only) Full Detent Limited Detent Smooth ore Shroud 2 Hole Flange Surface Mount C.20 [3.00].65 [4.20] D 2 Plcs..045 [.0] Description Dim. Dim. Dim. C Dim. D Full Detent Limited Detent Smooth ore M/-COM (Ref. only) RF Connectors Shroud Press Fit Description Full Detent Limited Detent Dim. Dim. M/-COM Part (Ref. only) No Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

44 P Microminiature Push-On Coaxial Connectors Shrouds (Continued) Shroud Solder-In Hermetic.080 [2.00].45 [3.70].40 [3.60].050 [.30].05 [0.40].098 [2.50] Description M/-COM (Ref. only) Full Detent Limited Detent Smooth ore Glass ead ssembly.05 [.400].063 [.60].25 [3.20].099 [2.50] M/-COM Part (Ref. only) No etween Series dapters etween Series Coaxial Transmission Line dapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent with good electrical performance. The small size, low VSWR, and broad frequency coverage permits a wide range of applications in both measurement and systems use. SM Plug P Plug.690 [7.50] Ref. Part Number M/-COM (Ref. only) SM P Plug SM P.498 [2.60].87 [4.70] Part Number M/-COM (Ref. only) P SM Plug.560 [4.20] SM Plug.632 [6.00] Ref..32 [7.90] P Part Number M/-COM (Ref. only) Part Number M/-COM (Ref. only) Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

45 M Microminiature Connectors Introduction The microminiature series has been developed to meet the increasing demand for smaller connector size. This series is small, but still very rugged for its relative size. The interface mating design insures precise outer shell alignment before engagement of the inner contacts. The M Series is compatible with smaller diameter semi-rigid cable. Design and Construction ll shell and body parts are made of stainless steel for ruggedness and long life. The dielectric is PTFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. The coupling thread is UNF thread. Types The M Series connectors are available for appropriate size semi-rigid and flexible coaxial cables. Panel and bulkhead mount are also available to provide complete flexibility to component and system design. pplication Typical applications include requirements from low RF to high microwave frequencies. The higher order moding for this series is above 45.0 GHz, but the primary feature is the microminiature size. 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

46 M Microminiature Connectors Introduction (Continued) Interface Mating Dimensions Plug Weather Seal Gasket G D Reference Plane F E C.38-40, UNF-2 See Note.38-40, UNF-2 Reference Plane E F C D Dim. Min. Max C D E F G Dim. Min. Max C D E F ID to meet VSWR and contact resistance when mated with / [ /-.027] dia. pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. Specifications Requirement MIL-C-3902 pplicable Paragraph Detail General Material 3.3 Steel corrosion resistant per STM--582 and STM--484, Type 303. eryllium copper per STM 96. PTFE Fluorocarbon per STM-D-457. Center contacts shall be gold plated to a min. thickness of [0.003] in accordance with Finish 3.3 MIL-G-45204, Typ I, Grade C. ll other metal parts shall be finished as to provide a connector which meets the corrosion requirements. Design 3.4 The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348 are met. Electrical Insulation Resistance 3. The insulation resistance shall not be less than 5,000 megohms. Corona Level 3.22 The connector shall not exhibit breakdown when the voltage is 50 volts rms at 70,000 ft. Dielectric Withstanding Voltage 3.7 The magnitude of the test voltage shall be 500 volts rms at sea level. RF HIgh Potential 3.23 The withstanding voltage is 375 volts rms at 5 MHz. Leakage current is not applicable. Contact Resistance 3.6 Center contact resistance: 3.5 milliohms max. Outer contact resistance: 2.8 milliohms max. VSWR 3.4 No military slash sheet applies. Consult factory. Frequency range dependent on cable used. RF Leakage 3.26 No military slash sheet applies. Consult factory. Insertion Loss 3.27 No military slash sheet applies. Consult factory. Frequency range dependent on cable used. Mechanical Force to Engage 3.5. The torque required to engage and disengage shall not exceed in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention lbs. min. pplicable for plug connectors only. Coupling Proof Torque in.-lbs. min. pplicable for plug connectors only. Cable Retention 3.24 No military slash sheet applies. Consult factory. pplicable to jack connectors only. Oversize pin.065 [0.49] min. dia.,.045 [.4] deep; insertion Mating Characteristics 3.7 force 3 lbs. max. with.063 [0.44] min. dia. pin; withdrawal force 0.5 oz. min. with.05 [0.38] max. dia. pin. The connector to be tested and its mating connector shall be subjected to 500 insertion and Connector Durability 3.5 withdrawal cycles at 2 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque 2 in.-lbs. Environmental Vibration 3.8 Specification MIL-STD-202, method 204, test condition D. Shock 3.9 Specification MIL-STD-202, method 23, test condition I. Thermal Shock 3.20 No military slash sheet applies. Consult factory. Corrosion (Salt Spray) 3.3 Specification MIL-STD-202, method 0, test condition. Moisture Resistance 3.2 Specification MIL-STD-202, method 06. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

47 M Microminiature Connectors For Flexible and Semi-Rigid Cables Straight Cable Plug M Plug.687 [7.45] Ref..87 [4.75] Heat Shrink Tubing* Cable ttachment Dim. M/-COM (Ref. only) Part Number RG 96/U Crimp.450 Flexible.40 Ref * Direct.360 Semi-Rigid Solder 9.20 Ref * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. Straight Cable M.87 [4.75] Cable ttachment Dim. M/-COM Part.650 [6.5] Ref. (Ref. only) Number.047 * Direct.330 Semi-Rigid Solder 8.40 Ref Heat Shrink Tubing* * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. ulkhead Feedthrough Cable.28 [3.25] Min..38 [3.5] Min..32 [7.92] Recommended Mounting Hole M.778 [9.76] Ref..87 [4.75] Ref..062 Max. [.57] Panel Heat Shrink Tubing* Cable ttachment Dim. M/-Com Part (Ref. only) Number RG 96/U Crimp.565 Flexible 4.40 Ref * Direct.458 Semi-Rigid Solder.60 Ref * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. Right-ngle Cable Plug M Plug.87 [4.75] Ref. Heat Shrink Tubing*.393 [9.98] Ref..323 [8.20] Ref..600 [5.24] Ref. Cable ttachment Dim. Dim. M/-Com Part Number (Ref. only).047 * Direct Semi-Rigid Solder 6.50 Ref Ref * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. 7RF Connectors ulkhead Feedthrough.38 [3.5] Min..062 Max. [.57] Panel M.28 [3.25] Min..87 [4.75] Recommended Mounting Hole.438 [.3].358 [9.09].05 [0.38].030 [0.76].027 [0.69].037 [0.94] Description M/-COM Part Number (Ref. only) Captured Center Contact* Turret Terminal Rear Mount * Contact captivation per U.S. patent number 3,292,7. Finish: Gold plate. Printed Circuit oard Straight.95 [4.95].385 [9.78].55 [3.94].56 Sq. [3.96].00 [2.5] Typ. Description M/-COM Part Number (Ref. only) Captured Center Contact* Straight Terminal M Sq. Typ. [0.69] [0.5] 4 Plcs. * Contact captivation per U.S. patent number 3,292,7. Finish: Gold plate. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

48 SSM Subminiature Coaxial Connectors Introduction The success of the SM connector created a need for a smaller version for reduced packaging requirements. The SSM series was designed to a size compatible with smaller diameter semi-rigid cable. The coupling thread is 0-36 UNS thread. Design and Construction s with the SM series, all shell and body parts are made of stainless steel for ruggedness and long life. The dielectric is solid PTFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. Types SSM connectors are available for both semi-rigid and flexible coaxial cable. Panel and bulkhead mount, strip transmission line type, microstrip transmission type and hermetically sealed connectors and in-series adapters give designers complete flexibility for component and system design. Upper Operating Frequency Limits The standard SSM series allows operation to 38.0 GHz. The extended frequency SSM series allows high order mode free operation beyond 40.0 GHz. The extended frequency series directly mates with the standard SSM series with minimum discontinuity Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

49 SSM Subminiature Coaxial Connectors Introduction (Continued) Interface Mating Dimensions D F G Plug H C Reference Note Note 2 C Reference Plane Note D UNS-2 Thd. J G D H E UNS-2 Thd. Note E F H J G Plug Plug Dim. Min. Max C D E F G H J Dim. Min. Max C D E F G H J RF Connectors. ID to meet VSWR and contact resistance when mated with / [ /-.027] dia. pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

50 SSM Subminiature Coaxial Connectors Introduction (Continued) Specifications General Materials Finishes Design Electrical Insulation Resistance Corona Level Dielectric Withstanding Voltage RF HIgh Potential Contact Resistance VSWR RF Leakage Insertion Loss Steel corrosion resistant per STM--582 and STM--484, Type 303. eryllium copper per STM 96. PTFE Fluorocarbon per STM-D-457. Center contacts shall be gold plated to a min. thickness of [0.003] in accordance with MIL-G-45204, Typ I, Grade C. ll other metal parts shall be finished as to provide a connector which meets the corrosion requirements. The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348 are met. The insulation resistance shall not be less than 5,000 megohms. The connector shall not exhibit breakdown when the voltage is 90 volts rms at 70,000 ft. The magnitude of the test voltage shall be 750 volts rms at sea level. The withstanding voltage is 500 volts rms at 5 MHz. Leakage current is not applicable. Center contact resistance: 2 milliohms max. Outer contact resistance: 2 milliohms max. Refer to applicable military slash sheet or consult factory. Frequency range dependent on cable used. Refer to applicable military slash sheet or consult factory. Refer to applicable military slash sheet or consult factory. Frequency range dependent on cable use. Mechanical Force to Engage The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention 60 lbs. min. pplicable for plug connectors only. Coupling Proof Torque 5 in.-lbs. min. pplicable for plug connectors only. Cable Retention Refer to applicable military slash sheet or consult factory. pplicable to jack connectors only. Reference MIL-STD-348 for dimensions; oversize pin Mating Characteristics.02 [0.53] min. dia.,.045 [.4] deep; insertion force 3 lbs. max. with.0208 [0.528] min. dia. pin; withdrawal force oz. min. with.095 [0.495] max. dia. pin. The connector to be tested and its mating connector shall be subjected to 500 insertion and Connector Durability withdrawal cycles at 2 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque 5 in.-lbs. Environmental Vibration Specification MIL-STD-202, method 204, test condition D. Shock Specification MIL-STD-202, method 23, test condition I. Thermal Shock Refer to applicable military slash sheet or consult factory. Corrosion (Salt Spray) Specification MIL-STD-202, method 0, test condition. Moisture Resistance Specification MIL-STD-202, method 06. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

51 SSM Subminiature Coaxial Connectors For Semi-Rigid Cable.085 [2.6] Direct Solder ttachment Straight Cable Plug (Without Center Contact).330 Ref. [8.38] [6.35] M/-COM MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE Electrical DC 40.0 GHz Straight Cable Plug (With Center Contact).330 Ref. [8.38] [6.35].20 [3.05] M/-COM MP Dim. Dim. RG/U Cable Cable Dielectric Solid 2.22 Min..35 Ref. PTFE Straight Cable (With Center Contact).500 [2.70].87 [4.75] M/-COM MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE ulkhead Feed-through Cable.72 Min. [4.37].92 [4.88] Min. Recommended Mounting Hole [6.35] Lock Washer Gasket.685 [7.40].20 [3.05].25 Max. [3.8] Panel.375 [9.53] M/-COM MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE 7RF Connectors Flange Mount Cable.500 [2.70].093 [2.36] 4 Plcs..20 [3.05].375 [9.53] Sq..232 [5.89] Typ. M/-COM MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE Right-ngle Cable Plug.550 [3.97] Ref. [6.35] M/-COM MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE.20 [3.05] Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00. Inner housing that is soldered to cable is gold plated. Refer to recommended assembly tools in pplication Tooling Section. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

52 SSM Subminiature Coaxial Connectors Flexible Cable Solder ttachment Straight Cable Plug, 3 For Flexible Cable.330 [8.38] [3.75] Ref. Heat Shrink Tubing [6.35] M/-COM MP RG/U Cable /U, /U, 79, 87, 88, 36 Straight Cable 3.87 [30.5] Ref. Heat Shrink Tubing.87 [4.75] M/-COM MP RG/U Cable /U, /U, 79, 87, 88, 36 Finish: Gold plated. Inner housing that is soldered to cable is gold plated. Right-ngle Cable Plug.550 [3.97] Ref..330 [8.38].000 [25.40] Ref. [6.35] Heat Shrink Tubing M/-COM MP RG/U Cable /U, /U, 79, 87, 88, 36 Flexible Cable Crimp ttachment Straight Cable Plug, 2.28 [32.54] Ref. M/-COM MP Dim. RG/U Cable.062 Ref. 74/U, 79, , 88, 36 Heat Shrink Tubing ulkhead Feed-through Cable, 2.77 Min. [4.50].92 Min. [4.88] Recommended Mounting Hole.400 Ref. [35.56].25 Max. [3.8] Panel Heat Shrink Tubing M/-COM MP Dim. RG/U Cable Ref 78/U, Ref. 74/U, 79, 87, 88, 36 Right-ngle Cable Plug, Ref. [3.97] Heat Shrink Tubing.900 [22.86] Ref. M/-COM MP Dim. Dim. RG/U Cable.625 Ref.525 Ref. 74/U, 79, , 88, Refer to recommended assembly tools in pplication Tooling Section.. Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00. Inner housing that is soldered to cable is gold plated. 2. Captured contact. 3. Non-captured contact Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

53 SSM Subminiature Coaxial Connectors Panel Mount Receptacles Solder Pot Terminals Flange Mount Receptacle.575 [4.6].03 [0.79] Min..050 [.27].375 Sq. [9.53].093 [2.36] 4 Plcs. M/-COM MP Flange Mount Receptacle.575 [4.6].0 [2.79].03 [0.79] Min..050 [.27].093 [2.36] 2 Plcs..87 [4.75].480 [2.9] M/-COM MP Flange Mount Receptacle.400 [0.6].645 [6.38].034 [0.86].02 [0.53] Min..0 [2.79].093 [2.36] 4 Plcs..375 [9.53] Sq. M/-COM MP ulkhead Mount Receptacles Solder Pot Terminals ulkhead Feed-through Receptacles Rear Mount.600 [5.24].0 [2.79].093 Max. [2.36] Panel.02 [0.53] Min..034 [0.86].92 [4.88] Min..77 Min. [4.50] Recommended Mounting Hole M/-COM MP RF Connectors Rear Mount (With O Ring) Turret Terminal ulkhead Feed-through Receptacle Front Mount.600 [5.24].0 [2.79].600 [5.24].062 Max. [.57] Panel.02 [0.53] Min..034 [0.86].062 Max. [.57] Panel.050 [.27].92 [4.88] Min..77 Min. [4.50] Recommended Mounting Hole.77 Min. [4.50].0.92 [2.79] [4.88] Min. Recommended Mounting Hole M/-COM MP M/-COM MP Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to Captured Center Contact. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

54 SSM Subminiature Coaxial Connectors Panel Mount Receptacles Straight Terminal Flange Mount.0 Receptacle 2 [2.79].875 [22.23].034 [0.86].093 [2.36] 4 Plcs. M/-COM.375 Sq. [9.53] MP Tab Terminal Flange Mount Receptacle Thick [0.0] x.034 Wide [0.86].093 [2.36] 2 Plcs..480 [2.9] M/-COM MP Ref. [2.07].87 [4.75] Printed Circuit oards Straight.530 [3.46].034 [0.86].040 Typ. Sq. [.02] 4 Plcs. [6.35] Sq. M/-COM MP Finish: Gold plate. Right-ngle.499 [2.67].495 [2.57] [6.35] Sq..034 [0.86].040 Sq. Typ. [.02] 4 Plcs. M/-COM MP Circuits Microstrip Transmission Line Circuits, Flange Mount Tab Terminal.005 [0.3] Thick.375 [9.53] Sq. M/-COM MP Dim. Dim..600 Ref..25 Ref [4.70].093 [2.36] 4 Plcs. Solderless Compression Terminal.093 [2.36] 2 Plcs..034 [0.86] M/-COM.480 [2.9].086 [2.8].375 [9.53].87 [4.75] MP Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to Captured center contact. 2. Non-captured center contact. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

55 SSM Subminiature Coaxial Connectors Hermetically Sealed Metal-To-Metal Hermetic Seal Receptacle With EMI/RFI Gasket, Field Replaceable Solder and raze-in, 4 Electrical VSWR (GHz) f RF Leakage (d) (00 fghz) EMI/RFI Gasket ccepts Contact.02 ±.00 [0.30 ± 0.03].0 Max..005 [2.79] Depth [0.3] Min..375 [9.53].322 [8.8] ±.00 [2.9] [0.30 ± 0.03].076 [.93].87 [4.75].093 [2.36] 2 Plcs. M/-COM MP Feed-through Receptacle, Formable Gasket 2, 4 Electrical VSWR (GHz) f RF Leakage (d) (00 fghz) Mechanical Installation Thermal Limit 250 C Formable Gasket.45 [.46].080 [2.03] [ ] [6.35] Recommended Mounting Hole [ ] M/-COM MP Feed-through Receptacle, Solder and raze-in 3 Electrical VSWR (GHz) f RF Leakage (d) (00 fghz).383 [9.73].060 [.53].02 [0.30].45 [3.68] M/-COM MP RF Connectors Panel Feed-through Receptacle, Solder and raze-in Electrical VSWR (GHz) f RF Leakage (d) (70 fghz).400 [0.6].05 [0.38].5 [2.92].45 [3.68] M/-COM MP Dim Finish: Gold plate.. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to -02. For nickel plate, change the suffix from -00 to Finish: Gold plate, -00. This unit has a unique self-matching compensation step, allowing direct attachment to the substrate, resulting in minimal package size. 4. Refer to recommended assembly tools in pplication Tooling section. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

56 SSM Subminiature Coaxial Connectors Hermetically Sealed (Continued) Panel Feed-through Hermetic dapter to -36, UNS Min. [5.97].32 [7.92] Lockwasher Gasket.437 [.0] M/-COM MP Electrical VSWR (GHz).0 +.0f RF Leakage (d) (00 fghz).062 Max. [6.35] [.57] Panel Min..4 [0.44] Recommended Mounting Hole [5.82] [.52] O-Ring Gasket Hermetic Seal Flange Mount Receptacle, 2 Electrical VSWR (GHz) f RF Leakage (d) (70 fghz).375 [9.53] O-Ring.05 [0.38].45 [3.68].5 [2.92].093 [2.36] 4 Plcs..375 Sq. [9.53] M/-COM MP Dim Rear Mount Receptacle, 2 Electrical VSWR (GHz) f RF Leakage (d) (70 fghz).72 [4.37] Min..92 [4.88] Min..093 Max. [2.36] Panel Recommended Mounting Hole O-Ring [6.35].500 [2.70] Lockwasher.32 [7.92].05 [0.38].5 [2.92] M/-COM MP ulkhead Feed-through Front Mount Receptacle.32 [7.92] O-Ring.05 [0.38] M/-COM MP Electrical VSWR (GHz) f RF Leakage (d) (70 fghz).475 [2.07].5 [2.92] Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to On passivated versions (-02), pins are pre-tinned using Sn60 solder. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

57 SSM Subminiature Coaxial Connectors In-Series dapters to dapter.500 [2.70].25 [3.8].56 cross [3.96] Flats M/-COM MP Plug to Plug dapter.875 Ref. [22.23].25 [3.8].56 cross [3.96] Flats [6.35] M/-COM MP Plug to dapter (Connector Saver).840 Ref. [2.34].25 [3.8].56 cross [3.96] Flats [6.35] M/-COM MP ulkhead Mount to dapter.72 Min. [4.36] Recommended Mounting Hole.92 Min. [4.88].070 Max. [.78] Panel Lockwasher.700 [7.78] [6.35] M/-COM MP RF Connectors Right-ngle Plug to dapter.565 [4.35] Ref..523 [3.28] [6.35] M/-COM MP Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

58 SSM Subminiature Coaxial Connectors.085 [2.6] and.070 [.78] Direct Solder ttachment Straight Cable Plug (Without Center Contact), 3 High Frequency For Semi-Rigid Cable Specifications Nominal Impedance 50 ohms Frequency Range dc to 40 GHz Voltage Standing Wave Ratio f (GHz) Insertion Loss.04 x f (GHz) = d max. Voltage Rating 250 volts RMS max. working voltage.330 Ref. [8.38] [6.35] M/-COM MP Dim. RG/U Cable Cable Dielectric Solid 2.2 PTFE Straight Cable Plug Center Contact, 3 [6.35].20 [3.05] M/-COM MP Dim. Dim. RG/U Cable Cable Dielectric Solid PTFE Straight Cable [2.70].20 [3.05].87 [4.75] M/-COM MP Dim. RG/U Cable Cable Dielectric Solid PTFE Finish: Gold plate. Panel Mount Straight Terminal Flange Mount Receptacle 2, [22.23].00 [2.54].093 [2.36] 4 Plcs..03 [0.79].375 Sq. [9.53] M/-COM MP Finish: Gold plated, -00. For passivated stainless steel coupling nut, change the Part Number suffix from -00 to -02. Inner housing that is soldered to cable is gold plated. 2. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to Refer to recommended assembly tools in ppication Tooling Section. 4. Captured center contact. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

59 RF Connectors pplication Tooling Hand Tools MP CERTI-CRIMP Hand Tools are our top-of-the-line crimping tools featuring the original ratcheted crimp control. ll tools are designed to exacting specifications, and manufactured using high quality materials to provide long service life. Recommended for low production runs, repairs and prototype work, and applications requiring consistent, highly-reliable terminations. See Catalog for further information. Hand Tool Kit for SM and lindmate Connectors Part Number Typical CERTI-CRIMP Hand Tools with Integral (Non-Interchangeable) Dies Part Number (used with PRO-CRIMPER Tool Frame ) for 50 Ohm NC Dual Crimp MIL Type Connectors Part Number for 50 Ohm N Connectors CERTI-CRIMP Hand Tool with Interchangeable Dies Part Number 6970 Part Numbers Item Description MP Military (M22520/) Hand Tool Plug Locator (without Center Contact) Plug Locator (with Center Contact) Locator Die Set for RG-402/U Cable (.4 [3.58] O.D.) Die Set for RG-405/U Cable (.086 [2.8] O.D.) Cutoff Fixture Cable Dressing Fixture Trimmer Tool Cable end Fixture ssembly Includes following 6 items: end Segment, RG-402/U (.25 [3.8] Radius) end Segment, RG-402/U ( [6.35] Radius) end Segment, RG-405/U Tool Holder Limiting Pin Conforming lock Hex Wrench Carrying Case 326- Insert, Case 327-7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

60 RF Connectors pplication Tooling (Continued) Solder ssembly Kit rass SM Connectors MP Kit Part Number M/-COM Kit Part Number For installation of SM connectors to.035 [0.89] and.4 [3.58] diameter semi-rigid cable Inserts Locator Tools Dielectric Insert Tool Item Description MP M/-COM Center Contact Holder Dielectric Insert Tool Dielectric Recess Tool Fixture Sub-ssembly Inserts.085 [2.6] (2) Inserts.4 [3.58] (2) Locator Tool Retainer Ring Pliers Solder Gauge.00 [0.25] Solder Gauge.05 [0.38] Solder Gauge.08 [0.46] Solder Gauge Fixture Sub-ssembly Retainer Ring Pliers Dielectric Recess Tool Center Contact Holder Universal Compression Crimp Tool MP Kit Part Number M/-COM Kit Part Number MP Universal Compression Crimp Tool offers the ability to rapidly produce cable assemblies using solderless compression crimp connectors with semi-rigid cables. This universal assembly tool kit will attach SM, OSP, N and TNC series connectors to.4 [3.58],.085 [2.6] and [6.35] cable quickly and consistently with excellent mechanical and electrical results. The tool kit permits single hand assembly. nvils and cable supports can be quickly changed. Crimp lengths can be adjusted from.00 [.025] to.000 [25.4] in increments of.00 [.025]. Sharp radius bends in cables are easily accommodated. The kit contains: Cable Supports Crimp Frame Gauge Description MP M/-COM Crimp Frame Calibration Gauge [3.58] Cable Support [2.6] Cable Support SM Plug nvil SM nvil Type N Plug nvil Type N nvil TNC Plug nvil TNC nvil OSP Plug nvil OSP nvil ll tools may be purchased separately. nvil 7060 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

61 RF Connectors pplication Tooling (Continued) MIL-C-22520/0-0 Equivalent Hex Crimp Kit MP Kit Part Number M/-COM Kit Part Number For military specified applications requiring quick and efficient cable to connector attachment. Five popular hex die sizes are available to crimp the outer cable conductor to connector housings. Crimp Tool Die Change Tool Hex Die The kit contains: Description MP Part Number M/-COM Part Number Crimp Tool Die Change Tool Hex Die,, C Hex Die D, E ll tools may be purchased separately. For the assembly of SM connectors, ccessory Kit Part Number is required. basic instruction sheet, included with the kit, aids in proper die selection MP M/-COM Hex Die Hex Die Die Hex Size For Use With Part Number Part Number ±.003 [0.08] RG/U Cable & , 58C, 4, 42, 223, 303, & 400 C , 74, 79, 87, 88, & D , 95, & 22 E , 62, 7, 20, & 302 dditional Dies vailable MP M/-COM Hex Die Hex Die Hex Size For Use With Part Number Part Number ±.003 [0.08] RG/U Cable RD36 Double raid 7RF Connectors SM Crimp Tool ccessory Kit MP Kit Part Number M/-COM Kit Part Number For installation of SM connectors to flexible braided cable. Crimp type SM connectors require Hex Crimp Kit Part Number The kit contains: Description MP Part Number M/-COM Part Number Center Contact Holder Locator Tool Locator Tool Solder Gauge.05 [0.38] ll tools may be purchased separately. Locator Tool Solder Gauge Center Contact Holder Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

62 RF Connectors pplication Tooling (Continued) Stripping Tools The hand-operated MP Coaxial Cable Stripper features interchangeable, color-coded blade cassettes and V-blocks to accommodate 2- or 3-step stripping for cable diameters ranging from 2.54 [.0] through 7.62 [.30]. You strip cable by simply clamping and rotating the tool around the cable. See Instruction Sheet IS 2766 for further information. Semi-Rigid Cable Tooling The tools listed here are designed specifically to strip and terminate semi-rigid cable. These tools operate basically the same as the flexible cable tools, in that they produce uniform terminations time after time, without heat damage from soldering. Hand Tool for NC and TNC Semi-Rigid Cable Connectors For Use With Connector Type Tool No. NC Single Crimp NC Commercial and UHF Miniature UHF Standard NC MIL Type Dual Crimp NC Commercial Dual Crimp Part Number Frame only does not include dies and locator Manual Trim and Point Tool Tyco Electronics offers a manual tool that performs both trimming and pointing operations. Tools are available for.4 [3.58] and.085 [2.6] diameter semi-rigid cable. These hand-operated tools are ideally suited for engineering, small production runs or field use. They feature tungsten carbide cutters for durability up to 30 times longer than the life of a high speed steel cutter. Replacement cutters are interchangeable and may be purchased separately. Replacement Cutters Trimmer: Part Number Pointer: Part Number MP Tool M/-COM Tool Part Number Part Number Cable Trim Length RG-402/U.085 (.4 [3.58]) 2.6 Fixed RG-405/U.070 (.085 [2.6]).78 Fixed RG-402/U (.4 [3.58]) djustable* RG-405/U (.085 [2.6]) djustable* *djustable trim length from.050 [.27] to.40 [3.56]. Replacement Collets MP Part Number M/-COM Part Number Cable RG-402/U (.4 [3.58]) RG-405/U (.085 [2.6]) Cable enders for Semi-Rigid Cable Cable ender Description MP Part Number M/-COM Part Number end Radius* Cable ender for RG-405/U (.085 [2.6]) /4 [6.4] 3/8 [9.8] Cable ender for RG-402/U (.4 [3.58]) /8 [9.8] /2 [2.7] *Radius of the bend is measured from the centerline of the cable Trimming Tools for Semi-Rigid Cable For soldered semi-rigid cable connectors using the cable center conductor as its contact. These tools are optional for most installations but recommended for optimum connector performance. Trim Tool Description Trim Tool for SM Connectors RG-402/U (.4 [3.58]) Trim Tool for SSM Connectors RG-405/U (.085 [2.6]) MP Part Number M/-COM Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

63 RF Connectors pplication Tooling (Continued) Cable Trimmers for Production Tyco Electronics cable trimmers are designed for production trimming of RG-402/U (.4 [3.58]) and RG-405/U (.085 [2.6]) coaxial cables in preparation for connector installation. The trimming operation produces an unusually clean, burr-free cut with minimum smear. The length and depth of cut are adjustable. Replacement hardware can be used with either tool. Cable Trimmers Description MP Part Number M/-COM Part Number RG-402/U (.4 [3.58]) RG-405/U (.085 [2.6]) Replacement Hardware Description MP Part Number M/-COM Part Number Saw lade Trim Saw lock (.4 [3.58]) Trim Saw lock (.085 [2.6]) Cable Pointers for Production Tyco Electronics cable pointers are designed to point straight and bent cables and are adjustable for desired center conductor length. The cable pointers cut 90 point on copper as well as copper-clad center conductors. Interface Inspection Gauges Tyco Electronics offers Connector Interface Gauges. They have shock proof and fully jeweled dial indicators. The rugged construction of the dial mechanism minimizes the need for repair or replacement. The gauge heads are manufactured from a corrosion resistant, hardening stainless steel which is heat treated for longer life. ll critical surfaces are ground and lapped for precision fit and superior surface finish. The heads are securely fastened onto the dial indicator for no movement between the gauge head and the dial indicator Cable Pointers Description MP Part Number M/-COM Part Number Single Pointer Single Pointer spindle allowing for precise measurements. Like the gauge heads, the plungers are specially designed to provide strength and durability. MP Replacement Cutter Part Number M/-COM Replacement Cutter Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Cable RG-402/U (.4 [3.58]) RG-405/U (.085 [2.6]) MP Connector Type Gauge Kit Part Number SM M/-COM Gauge Kit Part Number Plug SM Interface Example RF Connectors

64 RF Connectors pplication Tooling (Continued) SSM Connectors MP Kit Part Number M/-COM Kit Part Number For installation of SSM connectors to.070 [.78] and.085 [2.6] diameter semi-rigid cable. Inserts Dielectric Insert Tool Locator Tools Item Description MP M/-COM Center Contact Holder Dielectric Insert Tool Dielectric Recess Tool Fixture Sub-ssembly Inserts.070 [.78] (2) Inserts.085 [2.6] (2) Locator Tool Retainer Ring Pliers Solder Gauge.05 [0.38] ll tools may be purchased separately. Solder Gauge Fixture Sub-ssembly Retainer Ring Pliers Dielectric Recess Tool Center Contact Holder Econo-Crimp ssembly Kit MP Kit Part Number M/-COM Kit Part Number For quick and efficient cable to connector attachment. Five popular hex die sizes are available to crimp the outer cable conductor to connector housings. Item Description MP M/-COM Crimp Tool Hex Die,, C Hex Die D, E ll tools may be purchased separately. For the assembly of SM connectors, ccessory Kit Part Number is required. For SSM connectors, ccessory Kit Part Number is required. Crimp Tool Hex Die MP M/-COM Hex Die Hex Die Part Number Part Number Die Hex Size ±.003 [0.08] For Use With RG/U Cable & , 58C, 4, 42, 223, 303, & 400 C , 74, 79, 87, 88, & D , 95, & 22 E , 62, 7, 20, & SSM Crimp Tool ccessories MP Kit Part Number M/-COM Kit Model Number T-550 For installation of SSM connectors to flexible braided cable. Crimp type SSM connectors require Hex Crimp Kit Part Number Description Locator Tool MP Part Number Center Contact Holder M/-COM Part Number Center Contact Holder Locator Tool ll tools may be purchased separately. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

65 RF Connectors Cross Reference Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

66 RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

67 RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M3902/ M55339/ M3902/ M55339/ M3902/ M55339/ M3902/ M55339/ M3902/ M55339/ M3902/ M55339/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ M3902/ M8357/ RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

68 RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ M8357/ P Cross Reference Tyco Part Number M/-COM Part Number Tyco Part Number M/-COM Part Number Tyco Part Number M/-COM Part Number SSM Cross Reference 7068 Tyco Part Number M/-COM Part Number Tyco Part Number M/-COM Part Number Tyco Part Number M/-COM Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

69 Coaxial Connectors Introduction Product Facts Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series Temperature range -85 F to +257 F [-65 C to +25 C] (with neoprene gasket or bend relief cap) -80 F to 392 F [-62 C to +200 C] (with silicone gasket or bend relief cap) Dielectric Withstanding Voltage 000 volts RMS at sea level Contact Resistance 3 milliohms max., D.C. Captive Contacts Terminated connector contacts captivated from movement in both directions MICRODOT Standard Coaxial Connectors are designed to accept 50, 70, and 93 Ohm miniature coaxial cables. These connectors are available as Screw-On Series, Slide-On Series, or Quick-Connect Series. The Screw-On Series is intermateable with the Gold Plated Crimp Style Coaxial Connector Series and offers the dependability of a threaded coupling. For enhanced safety, choose connectors with wire holes. Choose Slide-On Series for the fastest, most convenient mating and unmating. The Quick-Connect Series offers the convenience of Slide-On coupling with added retention provided by a snap ring located on the jack/receptacle side. Consult Tyco Electronics for special cable accommodations and mounting features. 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

70 Coaxial Connectors Standard Connectors Performance Data Summary For Standard Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 50 Ohm connectors, 5 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 35 lb. min. Recommended Coupling Torque (Threaded Interface) 8 inch/pounds max. Recommended Receptacle Mounting Torque (ll Series) 8 inch/pounds max. Unmating Force (Slide-On Series) -7 pounds. Contact Protection (Unmated) Pin contact protected by coupling nut (threaded series) 2 or by housing (Quick- Connect and Slide-On Series). Socket protected by insulator and housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped to jerk ring (solder optional). ngle Plugs Cable Inner Conductor: Soldered to contact. Cable Shield: Soldered to ring & housing. Environmental Temperature Range (Continuous Service) -85 F to +257 F [-65 C to +25 C] (with Neoprene gasket or bend relief cap). -80 F to 392 F [-62 C to +200 C] (with Silicone gasket or bend relief cap). Vibration 3,4 MIL-STD-202, Method 204, Test condition (5 G peak). No physical damage or electrical discontinuities in excess of microsecond. Shock 3,4 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition. Moisture Resistance 3 MIL-STD- 202, Method 06. Salt Spray 3 MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 000 volts RMS at sea level. Contact Resistance 3 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 5 x 0 3 Megohms 500 volts D.C. Voltage Standing Wave Ratio 5 (VSWR) Typical 50 Ohm series,.2 max. to 2 GHz. Materials Housing, Nut, Jerk Ring rass per STM--6. Insulator TEFLON per STM-D-70. Pin Contact (Plugs) rass per STM--6. Socket Contact (s & Receptacles) eryllium Copper per STM--96. end Relief Caps (Plugs & s) Neoprene or Silicone Rubber per ZZ-R-765. Gaskets (s & Receptacles) Neoprene or Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating Contacts Gold per MIL-G-45204, Type II, Grade C, Class. Housing, Nut, Jerk Ring, Lockwasher Silver per QQ-S-365, Type II, Grade,.0002 [.005] min. Notes: Termination to cables with foamed dielectrics excluded. Straight connector jerk rings must be soldered to cable shield. 2 Pin protector required. See individual connector specifications. 3 Screw-On Series, threaded interface. 4 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environment. See individual specifications for connectors with safety wire holes. 5 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On or Quick-Connect Series connectors and specify VSWR testing and mating connector part number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

71 Coaxial Connectors Standard Connectors Screw-On Series See page 706 for mating options. Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series ulkhead S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Right-ngle Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series RF Connectors Printed Circuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Right-ngle Printed Circuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

72 Coaxial Connectors Standard Connectors Screw-On Series (Continued) Plugs S-50, 70 & [ ] Pin Pin Protector Dim. Dim. Cable et Instruction Former ssembly Max. Special Features Sheet No. MICRODOT I.S. No. Tool S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread Solderless ssembly RF-SM RF-SM Solderless ssembly RF-SM RF-SM Solderless ssembly, Hex Nut RF-SM Hex Nut RF-SM , Hex Nut,.87 [4.75] Hex Cable Clamp Nut RF-SM , [4.75] Hex Cable Clamp Nut RF-SM Solderless, Hex Nut w/ Safety Wire Holes,.02 [0.53] Wire Max RF-SM , 2 Hex Nut RF-SM , Hex Nut w/ Safety Wire Holes, [0.53] Wire Max RF-SM Hex Nut, Designed for Dual Shield Cable RF-SM Hex Nut RF-SM S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread Solderless ssembly RF-SM RF-SM RF-SM Solderless ssembly RF-SM Hex Nut w/ Safety Wire Holes, [0.35] Wire Max RF-SM RF-SM S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread Solderless ssembly RF-SM RF-SM Silicone end Relief Cap RF-SM Cable Inner Conductor, [0.78] Max RF-SM RF-SM Hex Nut RF-SM Hex Nut w/ Safety Wire Holes, [0.38] Wire Max RF-SM Pin protected. 2 Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

73 Coaxial Connectors Standard Connectors Screw-On Series (Continued) Right-ngle Plugs S-50, 70 & 93 C NGLE PLUG Dim. Dim. Dim. Cable C et Max. S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread Special Features Instruction Sheet No. Former MICRODOT I.S. No. ssembly Tool RF-SM Hex Nut RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.533] Wire Max RF-SM RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.355] Wire Max. Hex Nut RF-SM RF-SM RF-SM Hex Nut RF-SM Hex Nut RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.38] Wire Max. Hex Nut w/ Safety Wire Holes,.05 [.38] Wire Max., RF-SM Silicone end Relief Cap 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

74 Coaxial Connectors Standard Connectors Screw-On Series (Continued) s S-50, 70 & [0.6] Max. Panel Ø.375 [9.52].375 [9.52].292 Min. [7.42] Mounting Nut Lock Washer Ø.33 Min. [7.95] Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Cable Instruction Former et Special Features Sheet No. MICRODOT Max. I.S. No. ssembly Tool S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread RF-SM RF-SM Hex Collet Cable Clamp RF-SM S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread RF-SM RF-SM RF-SM S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread RF-SM RF-SM RF-SM No Mounting Flat, Hex Nut Cable Clamp RF-SM Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

75 Coaxial Connectors Standard Connectors Screw-On Series (Continued) Receptacles Max. Panel Max. Panel E Ø Min. C Solder Lug D Turret Mounting Nut C Solder Lug D Solder Pot Mounting Nut F Min. Fig. Fig. 2 Mounting Hole for Fig. & 2 Ø.037 [.940] Typ. C D Ø.037 [.940] Typ..245 [6.22] C.00 ±.005 [2.54 ±.27] Typ. Ø.055 Min. [.40] Typ..200 ±.005 [5.08 ±.27] Typ. Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread Wrench Flats No Mounting Flat Wrench Flats No Mounting Flat Wrench Flats No Mounting Flat Wrench Flats No Nut or Solder Lug, Threads into Panel Wrench Flats Housing Isolated by Nylon Insulator Wrench Flats 3.50 No Mounting Thread, Solder or Press into Panel w/ Safety Wire Holes,.04 [.355] Wire Max Outer Legs S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread No Mounting Flat No Mounting Flat RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

76 Coaxial Connectors Standard Connectors Screw-On Series (Continued) Receptacles (Continued) Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread No Mounting Flat No Mounting Flat Wrench Flats Housing 0 by Nylon Insulator Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

77 Coaxial Connectors Standard Connectors Slide-On Series ll plugs shown below mate with all jacks/receptacles shown below. SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series ulkhead SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Right-ngle Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series RF Connectors Plug Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Right-ngle Printed Circuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series ulkhead Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Printed Circuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

78 Coaxial Connectors Standard Connectors Slide-On Series (Continued) Straight Plugs.290 [7.37] C Max. Panel D Ø Contact Tail Solder Lug Mounting Nut Fig. Fig. 2 Plug Receptacle.500 [2.70] C Max. Panel Ø E Min. Mounting Nut Lock Washer Fig. 3 ulkhead Plug Mounting Hole for Fig. 2 & 3 Fig. Dim. Dim. Dim. Dim. Dim. Cable C D E Max. et Special Features SOS-50 Series (50 Ohm) Turret Pin Contact Tail Solder Pot Contact Tail Straight Pin Contact Tail SOS-70 Series (70 Ohm) Turret Pin Contact Tail Solder Pot Contact Tail Straight Pin Contact Tail SOS-93 Series (93 Ohm) Turret Pin Contact Tail Solder Pot Contact Tail Straight Pin Contact Tail Lockwasher supplied in place of solder lug. Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

79 Coaxial Connectors Standard Connectors Slide-On Series (Continued) s.520 [3.2] Ø [6.35].375 [9.53].375 [9.53] Ø.33 [7.95] Min. Mounting Nut Lock Washer Fig. Fig. 2 Mounting Hole Fig. SOS-50 Series (50 Ohm) SOS-70 Series (70 Ohm) SOS-93 Series (93 Ohm) Dim. Cable et Max Special Features Instruction Former ssembly Sheet No. MICRODOT I.S. No. Tool RF-SM RF-SM RF-SM RF-SM RF-SM [7.75] Over.R. Cap RF-SM-05 Hex Nut Cable Clamp RF-SM-92 Right-ngle Plugs 7RF Connectors Ø [6.35] SOS-50 Series (50 Ohm) SOS-70 Series (70 Ohm) SOS-93 Series (93 Ohm) Dim. Dim. Cable Max. O.D Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

80 Coaxial Connectors Standard Connectors Slide-On Series (Continued) Receptacles Max. Panel Max. Panel Ø E Min. D D Solder Lug Mounting Nut Turret Solder Lug Mounting Nut Solder Pot Fig. Fig. 2 Mounting Hole for Fig. & [6.22].00 ±.005 [2.54 ± 0.3] Typ..200 ±.005 [5.08 ± 0.3] Typ. C D C Ø.055 Min. [.40] Typ. Ø.037 Ø.037 Typ. Typ. [.940] [.940] Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series Thd. Special Features No Nut or Lockwasher, Threads into Panel 7080 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

81 Coaxial Connectors Standard Connectors Quick-Connect Series Plug QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series Receptacle QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series Right-ngle Plug QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series RF Connectors Receptacle QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

82 Coaxial Connectors Standard Connectors Quick-Connect Series (Continued) Straight Plugs QC-50 Series (50 Ohm) QC-70 Series (70 Ohm) QC-93 Series (93 Ohm) Dim. Dim. Cable et Max Special Features Instruction Former ssembly Sheet No. MICRODOT I.S. No. Tool Solderless ssembly RF-SM RF-SM Solderless ssembly RF-SM RF-SM RF-SM Solderless ssembly RF-SM RF-SM Mates with Only RF-SM-90 Right-ngle Plugs C Ø QC-50 Series (50 Ohm) QC-70 Series (70 Ohm) QC-93 Series (93 Ohm) Dim. Dim. Dim. Cable C et Max. Special Features Mates with Only Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

83 Coaxial Connectors Standard Connectors Quick-Connect Series (Continued) s QC-50 Series (50 Ohm) QC-93 Series (93 Ohm) Dim. Dim. Cable et Max Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM Receptacles Max. Panel C Solder Lug D Turret Mounting Nut Max. Panel C Solder Lug D Solder Pot Mounting Nut F Min. E Ø Min. Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm) No Mounting Flat No Mounting Flat Thd No Nut or Solder Lug, Threads into Panel No Mounting Flat, Split Solder Lug QC-93 Series (93 Ohm) No Mounting Flat No Mounting Flat No Mounting Flat, Mates with & Only 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

84 Coaxial Connectors Twinax Plugs: For cables with two inner conductors and one shield Standard Connectors Twinax Series Fig. Slide-On Series Fig. 2 Screw-On Series Fig Dim. Dim. Cable et Max Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM Twinax Receptacles and s: Max. Panel Max. Panel C D C D Lockwasher Washer Fig. Slide-On Series Solder Pot Mounting Nut Lockwasher Solder Pot Mounting Nut Fig. 2 Slide-On Series or Screw-On Series Max. Panel D C F Min. E Ø Min. Mounting Nut Lockwasher Fig. 3 Slide-On Series or Screw-On Series Mounting Hole Fig Dim. Dim. Dim. Dim. Dim. Dim. Cable Special Instruction Former C D E F Max. Features Sheet No. MICRODOT et I.S. No. ssembly Tool Lockwasher not included RF-SM RF-SM [.9] Max. Panel when mated with a Screw-On plug,.80 [4.57] Max. Panel when mated with a Slide-On plug [6.48] Max. Panel when mated with a Screw-On plug,.360 [9.4] Max. Panel when mated with a Slide-On plug Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

85 Coaxial Connectors Standard Connectors Triax Series and Terminals Triax Plugs: For cables with one inner conductor and two isolated shields Dim. Dim. Cable et Special Features Max Hex Nut w/ Safety Wire Holes, [.686] Wire Max. Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM-73 Triax Receptacle: Triax dapter:.60 Max. [4.06] Panel. [28.9] Ø.438 [.3] Min..60 Max. [4.06] Panel.09 [27.69] Ø.50 Min. [2.73] 0.50 [2.70] 0.56 [4.22] Nut 0.56 [4.22] 0.62 [5.75].468 [.89] Min. Lockwasher Mounting Nut Lockwasher Mounting Nut Part Number Mounting Hole Part Number Mates with Triax Plug, oth Ends Mounting Hole Terminals Fig. Fig. 2 Terminals are gold plated. See applicable MICRODOT drawing for solder and crimp instructions. Ø C D Ø Dim. Dim. Dim. Dim. C D Cable Max. Dielectric Cable Max. Inner Conductor Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Fig RF Connectors

86 Coaxial Connectors Standard Connectors Module locks D.242 [6.5] E C.375 [9.53] The five faces of basic block can be used to mount any one of 0 different terminations. The 5 faces are coded with letters as shown above. The 0 terminations are coded with Nos. 0. Part number, to be complete, must show face location and termination Nos. desired. (Ex: illustration shows C6 D5 E) Ordering part number will be converted to a MICRODOT assigned number at time of ordering. We do not stock complete assemblies. Size Dim. H 50 Ohm * Ohm * Ohm * *Part number to be completed by customer. Computer Part Number will be assigned by Tyco Electronics. Interfaces/Terminations Termination Number Mating Type Description S S QC QC SOS SOS Receptacle Plug with Knurl Nut Receptacle Plug Receptacle Plug.25 [3.8].320 [8.3].25 [3.8].345 [8.76].255 [6.48].290 [7.37] Ø Ø Ø 50 Series 70 Series 93 Series Thread Thread UNF UNF UNEF UNEF UNEF -32 UNEF Interfaces/Terminations (Continued) Termination Number Mating Type Description.350 [8.89] S S ulkhead Stud.60 Max. [4.06] Panel Ø.9 Min. [4.85].420 [0.67] ulkhead Plug with Plug, Nut Receptacle Nut With Wire Holes.60 Max. [4.06] Panel Ø Min..320 [8.3].320 [8.3] 50 Series 70 Series 93 Series [6.35] Mounting Nut Solder Lug.73 Min. [4.39] Height Turret Min. Mounting Nut Solder Lug Thread Thread Min. Hole Min. Hole Thread Thread Height UNF UNF UNF UNF UNF UNEF UNEF UNEF UNF -32 UNEF UNEF UNEF Ø.030 [.762] 3 Plcs Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

87 Coaxial Connectors Standard Connectors Caps, Hoods Caps, Screw-On Series For Receptacles and s Ø 0.20 [5.08] Diamond Knurl 0.20 [5.08] 0.3 [3.30] Fig. With Grounding Pin 0.2 [3.05] Ø.094 [2.39] Fig. Dim. S-50 Series S-70 Series S-93 Series Ø Diamond Knurl Fig. 2 Without Grounding Pin Ø.094 [2.39] Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Note: ll caps can be supplied with.094 [2.39] bead chain and end ring. When ordering, specify chain length and end ring hole size (.30 [3.30],.40 [3.56],.67 [4.24], or.93 [4.90] ) Receptacle Hoods Ø C 7RF Connectors Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Dim. Dim. Dim. C Thread UNF UNEF UNEF UNEF UNEF For Receptacle Series S-50, QC-50, QC-70 S-70, SOS-50, SOS-70, SOS-93 S-93, QC-93 S-70, SOS-50, SOS-70, SOS-93 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

88 Coaxial Connectors Standard Connectors dapters Feed-Thru dapters for Screw-On Series.60 Max. [4.06] Panel Ø.33 Min. [7.95] X Y X Y Nut.294 [7.47] Min. Lockwasher Mounting Nut Fig. Fig. 2 Mounting Hole Fig Dim. Dim End X Is End Y Is S-50 Receptacle S-50 Receptacle S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle NC and TNC/MICRODOT dapters for Screw-On, Slide-On, and Quick- Connect Series For mating NC/TNC connectors to MICRODOT standard connectors..469 Min. [.9].50 [2.73] Min. Mounting Hole End Is: Configuration End Is: 50 Series 70 Series 93 Series NC Plug Screw-On (S) Type Plug Screw-On NC Plug Type Receptacle NC Receptacle Screw-On (S) Type Plug NC Receptacle Screw-On (S) Type Receptacle NC ulkhead Receptacle Screw-On (S) Type Plug Mounting information: Housing.688 [7.48], Mtg. Nut.625 [5.88], Max. Panel.090 [2.29]. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

89 Coaxial Connectors NC and TNC/MICRODOT dapters for Screw-On, Slide-On, and Quick- Connect Series (Continued) Standard Connectors dapters (Continued).469 Min. [.9].50 [2.73] Min. Mounting Hole End Is: Configuration End Is: 50 Series 70 Series 93 Series NC ulkhead Receptacle Screw-On (S) Type Receptacle Screw-On (S) TNC Plug Type Receptacle TNC Receptacle Screw-On (S) Type Receptacle NC Plug Slide-On (SOS) Type Plug NC Plug NC Receptacle Slide-On (SOS) Type Receptacle Slide-On (SOS) Type Plug RF Connectors NC Receptacle Slide-On (SOS) Type Receptacle NC Slide-On (SOS) ulkhead Type Receptacle Receptacle NC Plug Quick-Connect (QC) Type Receptacle NC Receptacle Quick-Connect (QC) Type Receptacle Mounting information: Housing.688 [7.48], Mtg. Nut.625 [5.88], Max. Panel.090 [2.29]. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

90 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Performance Data Summary For Gold Plated Crimp Style Coaxial Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 50 Ohm connectors, 5 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 25 lb. min. Recommended Coupling Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] Recommended Receptacle Mounting Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] Contact Protection (Unmated) Pin contact protected by coupling nut. Socket protected by insulator and housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-ngle Plugs Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Environmental Temperature Range (Continuous Service) -80 F to +392 F. [-62 C to +200 C]. Vibration,2 MIL-STD-202, Method 204, Test condition (5 G peak). No physical damage or electrical discontinuities in excess of microsecond. Shock,2 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition C. Moisture Resistance MIL-STD- 202, Method 06. Salt Spray MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 000 volts RMS at sea level. Contact Resistance 4 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 5 x 0 3 Megohms 500 volts D.C. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm series,.2 max. to 2 GHz. Materials Housing, Nut, Inner Sleeve rass per STM--6, 35% Zinc. Insulator TEFLON per STM-D-70. Pin & Socket Contacts eryllium Copper per STM--96. Middle Sleeve Copper lloy. Facial Seal 4, Sealing Sleeve & Gasket Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating Contacts, Housing, Nut, Inner Sleeve, Middle Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade C, Class. NOTES: Screw-On Series threaded interface. 2 Tyco Electronics recommends the use of wired connectors in vibration and shock environments. See individual specifications for connectors with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies (See page 705) and specify VSWR testing and mating connector part numbers Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

91 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series Straight Plugs Ø Fig. Partial Nut Fig. 2 Knurl Nut Fig. 3 Full Nut Fig. 4 Nut w/ 3 Safety Wire Holes Fig. Dim. Dim. Cable Instruction Former Max. Special Features Sheet No. MICRODOT I.S. No. 50 Ohm Series.90 [4.83] -32 UNF-2 Thread RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM Dual shield cable version of RG 88 & RF-SM-8 70 Ohm Series.26 [5.49] -32 UNEF-2 Thread RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM-8 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

92 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) Straight Plugs (Continued) Fig. 93 Ohm Series [6.35] -32 UNEF-2 Thread Dim. Dim. Cable Instruction Max. Special Features Sheet No. Former MICRODOT I.S. No RF-SM RF-SM RF-SM RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 Right-ngle Plugs Ø C Knurl Nut Dim. Dim. Dim. Cable C et Max. 50 Ohm Series.90 [4.83] -32 UNF-2 Thread Ohm Series.26 [5.49] -32 UNEF-2 Thread Ohm Series [6.35] -32 UNEF-2 Thread Special Features Instruction Former Sheet No. MICRODOT I.S. No RF-SM- With environmental seal RF-SM RF-SM- With environmental seal RF-SM RF-SM- With environmental seal RF-SM RF-SM- With environmental seal RF-SM Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

93 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) s C Max. Panel Ø.33 [7.95] Min [9.53] Nut [9.53].292 Min. [7.42] Mounting Nut Lockwasher Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Dim. Cable C et Max. Special Features 50 Ohm Series.90 [4.83] -32 UNF-2 Thread Dual Shield Cable Version of RG 88 & Dual Shield Cable Version of RG 88 & Ohm Series.26 [5.49] -32 UNEF-2 Thread Ohm Series [6.35] -32 UNEF-2 Thread Instruction Former Sheet No. MICRODOT I.S. No RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM-8 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

94 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) Receptacles Max. Panel Max. Panel C Solder Lug Ø.037 [0.94] Typ. C D Turret Mounting Nut.245 [6.22] Ø.037 [0.94] Typ. Fig. 3 Fig. 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features 50 Ohm Series.90 [4.83] -32 UNF-2 Thread Wrench Flats No Mounting Flat Wrench Flats Thd No Nut or Solder Lug, Threads into Panel Ohm Series.26 [5.49] -32 UNEF-2 Thread Ohm Series [6.35] -32 UNEF-2 Thread D Solder Lug Fig. Fig. 2 C Solder Pot Mounting Nut D C F Min..00 ±.005 [2.54 ± 0.3] Typ. Ø.055 Min. [.40] Typ. Ø E Min. Mounting Hole for Fig. & 2 Mounting Pattern for Fig. 3 & ±.005 [5.08 ± 0.3] Typ. Gold Plated Crimp Style Coaxial Connectors ssembly Tools Table. Contact Crimp Tools MICRODOT Manufacturers stro Tool Table 2. Housing Crimp Tools MICRODOT Thomas & etts Max. Cable Diameter WT [2.24] WT [2.79] WT [3.94] Sealing Sleeve Inner Sleeve Pin Contact Housing Insulator Housing Sub-assembly Plug 7094 Middle Sleeve Cable Insulator Socket Contact Housing Insulator Housing Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Gasket

95 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Performance Data Summary For LEPR/CON Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 0 lb. min. when properly assembled to RG96/U and RG78/U cable. Recommended Coupling Torque (Threaded Interface) 24 inch/ounces max. Recommended Receptacle Mounting Torque (ll Series) 24 inch/ounces max. Typical Cable cceptance Dimensions Inner conductor:.02 [0.3] nom. Dielectric:.039 [0.99] max. Shield:.059 [.50] max. et:.08 [2.06] max. Contact Protection (Unmated) Twist pin contact protected from damage by insulator. Tube socket protected by connector housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-ngle Plugs Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped under housing. Environmental Temperature Range (Continuous Service) -85 F to +392 F [-65 C to +200 C]. Vibration,2 MIL-STD-202, Method 204, Test Condition (5 G peaks). No physical damage or electrical discontinuities in excess of microsecond. Shock,2 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition C. Moisture Resistance MIL-STD- 202, Method 06. Salt Spray MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50 Ohm coaxial cable RG78/U. Dielectric Withstanding Voltage 450 volts RMS at sea level, 250 volts RMS at 50,000 ft [5,240 m], 50 volts RMS at 70,000 ft. [2,336 m] Contact Resistance 8 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 0 4 Megohms 500 volts D.C. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm Series,.2 Maximum to 2 GHz. Materials Housing, Nut, Ferrule rass per STM--6. Insulator TEFLON per STM-D-70. Pin & Socket Contact Copper lloy. Crimp Sleeve Copper lloy. Lockwasher #425 ronze lloy. Plating Contacts, Housing, Nut, Ferrule, Crimp Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade C, Class. Notes: Screw-On Series, threaded interface. 2 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environments. See individual specifications with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On connectors (See page 705) and specify VSWR testing and mating connector part numbers. 7RF Connectors Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

96 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series Featuring Twist Pin, Pin and Socket Contacts, Standard Interface MICRODOT twist pin, pin and socket contacts are used in LEPR/CON connectors. Twist pin contact pins are produced from beryllium copper material with a gold-plated finish and constructed with helicallywound stress free cable of spring copper around a highly conductive soft copper core, terminated with a hemispherical weld. Twist pin contacts contain seven selfwiping spring surfaces, designed for consistent continuity and very low noise level. Twist pin contacts are self-aligning because of the contactengaging-end configuration. The sockets are a closed entry tubular-type contact, made of gold-plated copper alloy. The connectors are designed to be used with coaxial cables RG96/U and RG78/U. The connectors are designed with the contacts completely protected for reliability. The use of twist pin contacts makes the connectors very rugged for their size unf-2 [3.8] (Modified).05 [0.38] 3 Places ( Only).580 [4.73] Solder Center Conductor to Contact.05 [0.38] 3 Places ( Only).380 [9.65].395 [0.03].25-44UNF-2 [3.8] (Modified) Straight Plugs Nut Style [3.96] [4.06] Knurl [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM UNF-2 [3.8] (Modified).580 [4.73] Right-ngle Plug Nut Style [3.96] [4.06] Knurl [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM [4.73].270 [6.86].093 Max. [2.36] Panel.56 [3.96] Stk..270 [6.86] Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-2.56 [3.96] Stk UNF-2 [3.8] (Modified) ulkhead Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-2.56 [3.96] 2 Plcs UNF-2 [3.8] (Modified).40 [3.56].425 [0.80].093 Max. [2.36] Panel.022 Solder Pot [0.56] I.D. Turret.56 [3.96] 2 Plcs..425 [0.80].260 [6.60].25-44UNF-2 [3.8] (Modified).093 Max. [2.36] Panel.022 Turret I.D. [0.56].022 Solder Pot I.D. [0.56] Front Mount Receptacle Contact Tail Turret Solder Pot Rear Mount Receptacle Contact Tail Turret Solder Pot 7096 Mounting hole pattern and assembly tools shown on page 70. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

97 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts, Standard Interface (Continued).25-44UNF-2 [3.8] (Modified).225 [5.72].72 [4.37] Straight Printed Circuit Receptacle Typ. [.660].370 [9.40] Cavity Potted With Epoxy.25-44UNF-2 [3.8] (Modified) Thd..370 [9.40] Cavity Potted With Epoxy.385 [9.78].20 [3.05].72 [4.37].25-44UNF-2 [3.8] (Modified) Thd..385 [9.78].20 [3.05].72 [4.37].026 [6.60] 5 Plcs. Shipping Fixture.026 [6.60] Typ. Right-ngle Printed Circuit Receptacle (Small Mounting Pattern) Part Number Right-ngle Printed Circuit Receptacle (Standard Mounting Pattern) Part Number [5.2].545 [3.84].080 Max. [2.03] Panel.25 -UNF44-2 Thd. [3.8] (Modified) oth Ends.56 [3.96] [6.35] 2 Plcs UNF [5.49] Thd. Feed-Thru ulkhead dapter (oth Ends are Receptacle Interface) Part Number [5.3] Min..27 [5.5] 7RF Connectors UNF-2 [3.8] (Modified).490 [2.45].275 [6.99].093 Max. [2.36] Panel.56 [3.96] Sq..285 [7.24] Cavity Filled With Epoxy.5 [2.92] Straight Plug Right-ngle Receptacle Part Number Mounting hole pattern and assembly tools shown on page 70. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

98 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface The MICRODOT LEPR/CON coaxial connector series is now offered with a unique locking interface feature. This new coupling design permits the user to lock the coaxial plug, when mated to its receptacle, preventing any axial rotation. This adaptation is especially popular on connector installations requiring straight or 90 cable terminations firmly held in a fixed position. The locking interface is especially suited for telecommunications and instrumentation applications. Solder Center Conductor to Contact.395 [0.03].05 3 Plcs. Ref. [0.38] ( Only).05 3 Plcs. [0.38] ( Only).380 [9.65].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified).580 [4.73] Straight Plug Right-ngle Plug Nut Style [3.96] [4.06] Knurl [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-2, Nut Style [3.96] [4.06] Knurl [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-3, ssembly tools; page Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

99 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface (Continued).590 [4.99].590 [4.99].285 [7.24].093 Max. [2.36] Panel.56 [3.96].25-44UNF-2 [3.8] (Modified).56 2 Plcs. [3.96].25-44UNF-2 [3.8] (Modified) Straight Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-2 ulkhead Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM UNF-2 [3.8] (Modified).022 Solder Pot [.559] I.D..56 [3.96] 2 Plcs..022 Solder Pot [.559] I.D. Turret.56 2 Plcs. [3.96] Turret.55 [3.94].093 Max. [2.36] Panel.440 [.8].25-44UNF-2 Thd. [3.8] (Modified).275 [6.99].440 [.8].093 Max. [2.36] Panel Front Mount Receptacle Rear Mount Receptacle w/ Locking Interface Contact Tail Solder Pot Turret Contact Tail Turret Solder Pot.56 [3.96].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified).240 [6.0].72 [4.37].026 [0.66] Typ. 7RF Connectors.275 [6.99].093 Max. [2.36] Panel Straight Printed Circuit Receptacle Part Number [2.45].385 [9.78] Cavity Potted With Epoxy.5 [2.92].20 [3.05] Cavity Filled With Epoxy.56 [3.96] Sq..300 [7.62].25-44UNF-2 [3.8] (Modified).385 [9.78].72 [6.77] Right-ngle Receptacle Part Number [.660] 5 Plcs. Shipping Fixture Mounting hole pattern and assembly tools shown on page 70. Right-ngle Printed Circuit Receptacle Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

100 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Slide-On Series Featuring Twist Pin, Pin and Socket Contacts LEPR/CON Slide-On Connectors offer a convenient mating style along with Ultra-miniature size. Inner contacts are twist pin tubular sockets in plugs and twist pin contacts for jacks and receptacles. Positive housing contact is provided by a three finger contact in the plug housing..25 [3.8].60 [5.49].25 [3.8].440 [.8] Straight Plug Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM [9.65] Right-ngle Plug Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-6 [6.35] 2 Plcs..445 [.30].265 [6.73].90-32UNF-2 Thd. [4.83].40 Max. [3.56] Panel Ø.9 [4.85] Min..335 [8.5].640 [6.26].093 Max. [2.36] Panel.490 [2.45] Mounting Hole.56 [3.96] 2 Plcs UNF-2 [3.8] (Modified) Right-ngle ulkhead Mount Plug Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-76 Straight ulkhead Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM [3.99].220 [5.59].495 [2.57].022 Solder Pot [0.56] I.D..093 Max. [2.36] Panel Turret.25 [3.8] Straight Part Number Instruction Sheet Number Former MICRODOT I.S. Number RF-SM-5 Mounting hole and assembly tools shown on page UNF-2 [3.8] (Modified).56 [3.96] 2 Plcs. Front Mount Receptacle Contact Tail Turret Solder Pot 700 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

101 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Slide-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts (Continued).022 Solder Pot [.559] I.D..56 [3.96].56 [3.96] 2 Plcs UNF-2 [3.8] (Modified).335 [8.5].495 [2.57] Rear Mount Receptacle.093 Max. [2.36] Panel Turret.5 [2.92] [6.99] [2.45].56 Sq. [3.96].385 [9.78] Cavity Filled With Epoxy Contact Tail Turret Solder Pot Mounting Hole shown below..425 [0.80] Right-ngle Receptacle Mounting Hole Shown elow Part Number Typ [0.66].097 [2.46].385 [9.78].20 [3.05].72 [4.37].260 [6.60].4 [2.90] Min..72 [4.37] Straight Printed Circuit Receptacle Mounting Hole Pattern Shown elow Part Number [3.20] Min. ulkhead Receptacle Mounting Hole LEPR/CON Connector ssembly Tools Typ. [ ].046 Min. [.7] 5 Holes.026 Typ. [0.66] Right-ngle Printed Circuit Receptacle Mounting Hole Pattern Shown elow Part Number Typ. [.4.40] Typ. [ ].046 Min. [.7] 5 Holes Typ. [ ] Small Pattern Connectors Standard Pattern and Only Printed Circuit Receptacle Mounting Hole Pattern 7RF Connectors Contact Crimp Tool Housing Crimp Tool Connector Contact Crimp No. stro Tool MICRODOT Thomas & etts Straight Connector Only WT Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

102 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors (Continued) NC / LEPR/CON Connector dapters End.25-44UNF-2 [3.8] (Modified) End End.25-44UNF-2 [3.8] (Modified) End.900 [22.86].850 [2.59] End is MICRODOT Screw-On Plug End is NC Plug End is NC Receptacle End is MICRODOT Screw-On Receptacle Part Number Part Number [24.3].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified) End End End End.865 [2.97] End is NC Plug End is MICRODOT Screw-On Plug with Locking Interface End is NC Receptacle End is MICRODOT Screw-On Receptacle with Locking Interface Part Number Part Number [2.2] End End.25-44UNF-2 [3.8] (Modified) End End.785 [9.94] End is Screw-On Receptacle End is NC Plug End is NC Plug End is MICRODOT Slide-On Plug Part Number Part Number Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

103 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors (Continued) NC / LEPR/CON Connector dapters (Continued).800 [20.32].25-44UNF-2 [3.8] (Modified).900 [22.86] End End End End End is NC Plug End is MICRODOT Receptacle with Locking Interface End is NC Plug End is MICRODOT Slide-On Receptacle Part Number Part Number UNF-2 [3.8] (Modified) End End End End.965 [24.5].900 [22.86] End is NC Receptacle End is MICRODOT Screw-On Plug End is NC Receptacle End is MICRODOT Slide-On Plug Part Number Part Number End.25-44UNF-2 [3.8] (Modified) End End End 7RF Connectors.05 [25.78].965 [24.5] End is NC Receptacle End is MICRODOT Screw-On Plug with Locking Interface End is NC Receptacle Part Number Part Number End is MICRODOT Slide-On Receptacle Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:

104 Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Snap-Lock Series Product Facts Simple coupling design eliminates the need for tools and saves assembly time Positive locking mechanism provides its own fail-safe features Inspection of the mated connector is fast, simple and effective Push-Pull design allows higher panel density Quick-connect and disconnect features Performance Data Summary For Snap-Lock Connectors Electrical Impedance Designed to be compatible with 50 Ohm coaxial cables (Dual Shield RG 96). Dielectric Withstanding Voltage 450 volts RMS at sea level (Operating). Contact Resistance 8 milliohms max. at 3 amps. verage resistance: 4 milliohms Insulation Resistance 0 4 megohms min. Voltage Standing Wave Ratio (VSWR) 3.4 max.,.3 min. to 2 GHz. Environmental Temperature Range -85 F to +257 F [-65 C to +25 C]. Vibration MIL-STD-202, Method 204, Test condition D. No change in electrical discontinuity in excess of microsecond. Shock MIL-STD-202, Method 23, Test Condition C. No electrical discontinuity or evidence of physical damage. Mechanical Cable cceptance Dimensions Center conductor:.02 [0.3] nom. Dielectric:.040 [.02] max. Shield:.080 [2.03] max. et:.090 [2.29] max.. ll-crimp ssembly Center contacts and shield are crimped individually. Durability 500 mating cycles. Materials ody and ody Components rass per QQ--626 Comp 360. Contact Material Copper lloy. Crimp Sleeves Leaded Copper. Insulators TEFLON per STM-D-70. Lockwashers #425 ronze lloy. Plating Gold per MIL-G-45204, Type II, Grade C, Class. [6.35].750 [9.05].29 [5.56] [ ].79 [8.26] Straight Plug Part Number Max. [2.36] Panel.406 [0.3] 8-32 UNC-2 (Modified) ulkhead, Rear Mount Part Number [7.92] [ ] D Hole Dimensions For Panel Mounting.093 Max. [2.36] Panel.625 [5.88].406 [0.3] 8-32 UNC-2 (Modified) Receptacle, Rear Mount Part Number [5.56].32 [7.92].29 [5.56].32 [7.92].625 [5.88].093 Max..285 [2.36] Panel [7.24] 8-32 UNC-2 (Modified) Receptacle, Front Mount Part Number Connector/Cable ssembly Crimp Tools Center Contact and Shield Tool SKT & Pin Crimp Housing Crimp Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: