Agilent 11713A Attenuator/Switch Driver
|
|
- Samson Dawson
- 5 years ago
- Views:
Transcription
1 Agilent A Attenuator/Switch Driver Configuration Guide This configuration guide will help you through the process of configuring a switching system utilizing Agilent s A attenuator/switch driver. The A is capable of driving up to ten switch or attenuator sections. It drives with steady-state Vdc and is compatible with any switch or attenuator that requires + Vdc common, with ground for individual line activations. Switch and attenuator control can be accomplished manually from the front panel push-buttons or automatically over the GPIB interface bus. For applications requiring more than ten pairs of drivelines, multiple A may be used. Each A comes equipped with two plug-in drive cables for driving attenuators. A variety of other cables are also available. Contact your Agilent representative at the offices listed on the back page of this guide if you need more information.
2 Specifications Table. A attenuator/switch driver specifications and supplemental characteristics Specifications Driver power supply Voltage Current + ±.0 Vdc. A maximum peak for second 0. A maximum continuous current Contact pairs through, 9 and 0, maximum current of 0. A continuous through one or all contacts Supplemental Characteristics 00 or 0 Vac, +%, 0% at to 0 Hz 00 or 0 Vac, +%, 0% at to Hz Power 0 VA maximum 0 µs maximum for contact pairs through Response time 0 ms maximum for contact pairs 9 and 0 >,000,000 switchings at maximum Driver life current for contact pairs 9 and 0 Maximum load inductance 00 mh Maximum load capacitance < 0.0 µf for contact pairs 9 and 0 Net weight. kg (9 lbs) Height: 0 mm ( inches including feet) Rack height: 9 mm (. inches, halfwidth module) Width: mm (. inches) Dimensions Depth: 9 mm (. inches) Selection Options Agilent A attenuator/switch driver include: Return-to-Agilent warranty and service plans extendable to three years and covers power cords. Agilent A attenuator/switch driver options: (One of the following options is required) Option 00 Viking connector to 0-pin DIP plug; quantity (). Agilent -000 Option 0 Viking to Viking drive cables; quantity (). Agilent 0-0 Available cable accessories: Agilent A Viking connector to four ribbon cables; connects up to four switches. 0-9-pin conductor cable, to Viking connector (for four switches), 0 inches long pin conductor cable, bare wire to Viking connector (for five switches), 0 inches long Available rack mount kit accessories: 0-90 Kit rack adapter to mount a single instrument To mount two instruments side-by-side, order 0-99 Lock link kit and 0-9 Rack mount flange kit
3 Cable Drawings Available for Agilent A Attenuator/ Switch Driver 0- Part : -000 Figure Viking connector to 0-pin DIP plug Figure. 0-9-pin conductor cable, to Viking connector (for four switches), 0 inches long Part Figure. 0-0 Viking to Viking drive cables Figure pin conductor cable, bare wire to Viking connector (for five switches), 0 inches long Agilent A Figure. A Viking connector to four ribbon cables to connect up to four switches
4 Compatible Attenuators and Switches The A attenuator/switch driver is designed to drive the following Agilent attenuators and switches. Table. Compatible Agilent switches Agilent product Table reference Switch family Cables supplied with switch B SPDT NA A/B/C/F SPDT NA A/B/C Bypass NA A/B/C Bypass NA A/B/C/D/F SPDT A/B/C Multiport - and 0-9 0A/B/C Multiport - and 0-9 0A/B/C 9 Multiport - and 0-9 0B 9 Matrix - and 0-9 0A/B/C 0 Multiport - and 0-9 0B 0 Matrix - and 0-9 K, K, K Multiport Option 0: 0-00 or Option 00: 0-9K Multiport Option 0: 0-09 or Option 00: M Multiport -000 (optional) M Multiport -000 (optional) 9M Multiport 0- (optional) C/D/E Transfer 0-0 N0TL, N0UL SPDT NA NTL, NUL Bypass NA Table. Compatible Agilent attenuators Agilent product Table reference Attenuator family Cables suppled with attenuator 9G/H Attenuator Option 0: 0-00 or Option 00: 0-9G/H/K Attenuator Option 0: 0-00 or Option 00: 0-9G/H Attenuator Option 0: 0-00 or Option 00: 0-9K Attenuator Option 0: 0-00 or Option 00: 0-90K/L/M Attenuator -000 (optional) 90M Attenuator -000 (optional) 90K/L Attenuator -000 (optional) 90K/L Attenuator -000 (optional) 90M Attenuator -000 (optional)
5 Configuration Information for Switches The A attenuator/switch driver configuration tables designed to drive Agilent switches are listed below. Table. B SPDT switch configuration S9 S0 B switch Device under test (DUT) DC connector OFF S9 A = V, B = 0 V N/A to C connected DUT<+> connected to S9A DUT ON S9 A = 0 V, B = V N/A to C connected DUT<-> connected to S9B OFF S0 A = V, B = 0 V N/A to C connected DUT<+> connected to S0A DUT ON S0 A = 0 V, B = V N/A to C connected DUT<-> connected to S0B Table. A/B/C/F SPDT switch, A/B/C and A/B/C bypass switch configuration,, A/B/C Switch and F Switch Device under test (DUT) Solder terminal Vdc red DUT to (shared) C OFF violet to connected, to connected DUT ON yellow to connected, to connected OFF black to connected, to connected DUT ON green to connected, to connected OFF 9 orange to connected, to connected DUT ON 0 blue to connected, to connected OFF brown to connected, to connected DUT ON white to connected, to connected Vdc red DUT to (shared) C OFF violet to connected, to connected DUT ON yellow to connected, to connected OFF black to connected, to connected DUT ON green to connected, to connected OFF 9 orange to connected, to connected DUT ON 0 blue to connected, to connected OFF brown to connected, to connected DUT ON white to connected, to connected
6 Table. A/B/C/D/F SPDT switch configuration. Wire color Device under test (DUT) Option 0 A/B/C/D/F switch Agilent -000 Option Vdc red DUT to (shared) and (+V) red and orange Terminal and terminal OFF violet to C connected black DUT ON yellow to C connected yellow OFF black to C connected black DUT ON green to C connected yellow OFF 9 orange to C connected black DUT ON 0 blue to C connected yellow OFF brown DUT to C connected black ON white to C connected yellow Vdc red DUT to (shared) and (+V) red and orange Terminal and terminal OFF violet to C connected black DUT ON yellow to C connected yellow OFF black to C connected black DUT ON green to C connected yellow OFF 9 orange to C connected black DUT ON 0 blue to C connected yellow OFF brown to C connected black DUT ON white to C connected yellow Table. 0A/B/C multiport switch configuration Device under test (DUT) 0A/B/C switch Agilent 0-9 and - Vdc red brown Gnd white/brown green OFF violet Port orange DUT OFF black Port green OFF 9 orange Port violet OFF brown Port 9 white Vdc red brown Gnd white/brown green OFF violet Port orange DUT OFF black Port green OFF 9 orange Port violet OFF brown Port 9 white
7 Table. 0A/B/C multiport switch configuration Device under test (DUT) 0A/B/C switch Agilent 0-9 and - Vdc red brown Gnd white/brown green OFF violet orange Port ON yellow yellow OFF black green DUT Port ON green blue OFF 9 orange violet Port ON 0 blue gray OFF brown 9 white Port ON white 0 black Vdc red brown Gnd white/brown green OFF violet orange Port ON yellow yellow OFF black green DUT Port ON green blue OFF 9 orange violet Port ON 0 blue gray OFF brown 9 white Port ON white 0 black Table 9. 0A/B/C multiport switch and 0B matrix switch configuration Device under test (DUT) 0A/B/C and 0B switch Agilent 0-9 and - Vdc red Shared brown Gnd white/brown (port to ) green OFF violet Port orange OFF black Port green DUT OFF 9 orange Port violet OFF brown Port 9 white Vdc red Shared brown Gnd white/brown (port to ) green OFF violet Port brown DUT OFF black Port orange Note: Need two cables from A in order to drive one -port multiport.
8 Table 0. 0A/B/C multiport switch and 0B matrix switch configuration Device under test (DUT) 0A/B/C and 0B switch Agilent 0-9 and - Vdc red Shared brown Gnd white/brown (port to ) green OFF violet orange Port ON yellow yellow OFF black green Port ON green blue DUT OFF 9 orange violet Port ON 0 blue gray OFF brown 9 white Port ON white 0 black Vdc red Shared brown Gnd white/brown (port to ) green OFF violet brown Port ON yellow red DUT OFF black orange Port ON green yellow Note: Need two cables from A in order to drive one -port multiport. Table. K, K, K multiport switch configuration Switch option Agilent product Option 0 Option 00 K K K Wire color DIP pin Agilent 0-00 Viking cable Agilent 0- Wire color OFF violet violet ON yellow yellow Common to, the rest OFF Common to, the rest OFF Common to, the rest OFF OFF black black ON green green Common to, the rest OFF Common to, the rest OFF Common to, the rest OFF OFF 9 orange 9 orange ON 0 blue 9 0 blue Common to, the rest OFF Common to, the rest OFF OFF brown brown ON white 0 white Common to, the rest OFF Vdc red red All OFF is Common to All OFF is Common to All OFF is Common to
9 Table. 9K multiport switch configuration Wire color Option 0 DIP pin Agilent 0-09 Switch option Option 00 Viking cable Agilent Wire color Agilent product 9K OFF violet violet ON yellow yellow Common to, the rest OFF OFF black black ON green green Common to, the rest OFF OFF 9 orange 9 orange ON 0 blue 9 0 blue Common to, the rest OFF S9 /Y Vdc red red All OFF is Common to OFF OFF brown violet brown grey ON ON white yellow 0 white white/red Common to, the rest OFF Common to, the rest OFF Table. M, M multiport switch configuration (with optional cable -000) Agilent product M M OFF OFF ON ON Common to, the rest OFF Common to, the rest OFF Common to, the rest OFF Common to, the rest OFF OFF 9 ON 0 Common to, the rest OFF Common to, the rest OFF OFF ON Common to, the rest OFF Vdc All OFF is Common to All OFF is Common to Table. 9M multiport switch configuration (with optional cable 0-) Agilent product 9M OFF ON Common to, the rest OFF OFF ON Common to, the rest OFF OFF 9 ON 0 Common to, the rest OFF OFF ON Common to, the rest OFF OFF S9 ON Common to, the rest OFF Vdc All OFF is Common to 9
10 Table. C/D/E transfer switch configuration C/D/E switch Device under test (DUT) Agilent 0-0 Vdc red brown shared DUT to Gnd white/brown 9 white OFF violet Drive A ( to, to ) orange DUT ON yellow Drive B ( to, to ) green OFF black Drive A ( to, to ) orange DUT ON green Drive B ( to, to ) green OFF 9 orange Drive A ( to, to ) orange DUT ON 0 blue Drive B ( to, to ) green OFF brown Drive A ( to, to ) orange DUT ON white Drive B ( to, to ) green Vdc red brown shared DUT to Gnd white/brown 9 white OFF violet Drive A ( to, to ) orange DUT ON yellow Drive B ( to, to ) green OFF black Drive A ( to, to ) orange DUT ON green Drive B ( to, to ) green OFF 9 orange Drive A ( to, to ) orange DUT ON 0 blue Drive B ( to, to ) green OFF brown Drive A ( to, to ) orange DUT ON white Drive B ( to, to ) green Table. NTL and NUL bypass switch and N0UL and N0TL SPDT switch configuration NTL, NUL, N0UL and N0TL Switch Device under test Option 0 Option 0 (DUT) Vdc red DUT to (shared) (+V) +V OFF violet (A) A DUT ON yellow (B) B OFF black (A) A DUT ON green (B) B OFF 9 orange (A) A DUT ON 0 blue (B) B OFF brown (A) A DUT ON white (B) B Vdc red DUT to (shared) (+V) +V OFF violet (A) A DUT ON yellow (B) B OFF black (A) A DUT ON green (B) B OFF 9 orange (A) A DUT ON 0 blue (B) B OFF brown (A) A DUT ON white (B) B 0
11 Configuration Information for Attenuators The A attenuator/switch driver configuration tables designed to drive Agilent Technologies attenuators are listed below. Table. 9G/H and 9G/H/K and 9G/H and 9K attenuator configuration Attenuator option Agilent product Option 0 Option 00 9G/H 9G/H 9G/H 9K 9K Wire DIP pin Viking cable Wire color Agilent 0-00 Agilent 0- color Attenuation OFF violet violet 0 db 0 db 0 db 0 db 0 db ON yellow yellow db 0 db 0 db 0 db 0 db OFF black black 0 db 0 db 0 db 0 db 0 db ON green green db 0 db 0 db 0 db 0 db OFF 9 orange 9 orange 0 db 0 db 0 db 0 db 0 db ON 0 blue 9 0 blue db 0 db 0 db 0 db 0 db OFF brown brown 0 db 0 db 0 db 0 db ON white 0 white db 0 db 0 db 0 db Vdc red red Table. 90K/L/M and 90M and 90K/L and 90K/L, and 90M attenuator configuration (with optional cable -000) Viking cable Agilent -000 (optional) Agilent product 90K/L/M 90M 90K/L 90K/L 90M Attenuation OFF 0 db 0 db 0 db 0 db 0 db ON db 0 db 0 db 0 db db OFF 0 db 0 db 0 db 0 db 0 db ON db 0 db 0 db 0 db 0 db OFF db 0 db 0 db 0 db 0 db ON 0 0 db 0 db 0 db 0 db 0 db OFF 0 db 0 db 0 db ON db 0 db 0 db Vdc
12 Web Resources For more information about Agilent s RF and microwave test accessories, visit: For additional information about Agilent s service and support products, visit: Agilent Technologies Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Two concepts underlie Agilent s overall support policy: Our Promise and Your Advantage. Our Promise Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you receive your new Agilent equipment, we can help verify that it works properly and help with initial product operation. Your Advantage Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and onsite education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products. Agilent Updates Get the latest information on the products and applications you select. Agilent Direct Quickly choose and use your test equipment solutions with confidence. Agilent Open Agilent Open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of systemready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development. United States: Korea: (tel) 00 9 (tel) (00) (fax) 00 9 (fax) (00) Canada: Latin America: (tel) 9 (tel) (0) 9 00 (fax) 00 Taiwan: China: (tel) (tel) (fax) 000 (fax) 00 0 Other Asia Pacific Europe: Countries: (tel) 0 (tel) () 00 Japan: (fax) () 00 (tel) () tm_ap@agilent.com (fax) () 0 Contacts revised: 09//0 For more information on Agilent Technologies products, applications or services, please contact your local Agilent office. The complete list is available at: Product specifications and descriptions in this document subject to change without notice. Agilent Technologies, Inc. 00 Printed in USA, October, EN
Agilent N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz
Agilent N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz Technical Overview High Performance Power Limiters Broad frequency range up to 50 GHz maximizes the operating range of your instrument High power
More informationAgilent 87075C Multiport Test Set Product Overview
Agilent 87075C Multiport Test Set Product Overview A complete 75 ohm system for cable TV device manufacturers Now, focus on testing, not reconnecting! For use with the Agilent 8711 C-Series of network
More informationAgilent I 2 C Debugging
546D Agilent I C Debugging Application Note1351 With embedded systems shrinking, I C (Inter-integrated Circuit) protocol is being utilized as the communication channel of choice because it only needs two
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationAgilent N7744A 4-Channel Optical Multiport Power Meter N7745A 8-Channel Optical Multiport Power Meter. Fully compliant to LXI Class C specification
Agilent N7744A 4-Channel Optical Multiport Power Meter N7745A 8-Channel Optical Multiport Power Meter Fully compliant to LXI Class C specification General Information Up to 8 power meter channels in a
More informationAgilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications
Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications March 2006 Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical
More informationFull-featured CW Microwave Counters for Field, Factory or Lab
Full-featured CW Microwave Counters for Field, Factory or Lab Product Overview Agilent 53150A 20 GHz Counter Agilent 53151A 26.5 GHz Counter 46 GHz Counter High performance microwave counters: at home,
More informationSingle-Output 2000 W
Single-Output 2000 W 6571A-6575A Front panel and analog control of output voltage and current Fast, low-noise outputs Fan-speed control to minimize acoustic noise Protection features to ensure DUT safety
More informationAgilent CSA Spectrum Analyzer N1996A
Agilent CSA Spectrum Analyzer N1996A Demonstration Guide Introduction This step-by-step demo guide will help you explore the unprecedented value of the Agilent CSA spectrum analyzer for meeting your design,
More informationDebugging Digital Cameras: Detecting Redundant Pixels
Debugging Digital Cameras: Detecting Redundant Pixels Application Note Introduction Pixel problems and bit problems associated with their hardware and firmware designs can seriously challenge the designers
More informationAgilent MSO and CEBus PL Communications Testing Application Note 1352
546D Agilent MSO and CEBus PL Communications Testing Application Note 135 Introduction The Application Zooming In on the Signals Conclusion Agilent Sales Office Listing Introduction The P300 encapsulates
More informationAgilent 81600B Tunable Laser Source Family
Agilent 81600B Tunable Laser Source Family Technical Specifications August 2007 The Agilent 81600B Tunable Laser Source Family offers the full wavelength range from 1260 nm to 1640 nm with the minimum
More informationAgilent N5183A MXG Microwave Signal Generator
Agilent N5183A MXG Microwave Signal Generator Configuration Guide This guide is designed to assist in the ordering process for the MXG microwave signal generator. Agilent MXG microwave signal generator
More informationAgilent E5100A Network Analyzer
Agilent E5100A Network Analyzer Data Sheet These specifications are the performance standards or limits against which the instrument is tested. When shipped from the factory, the E5100A meets the specifications
More informationAgilent 87075C 75 Ohm Multiport Test Sets for use with Agilent E5061A ENA-L Network Analyzers
Agilent 87075C 75 Ohm Multiport Test Sets for use with Agilent E5061A ENA-L Network Analyzers Technical Overview Focus on testing, not reconnecting! Maximize production throughput of cable-tv multiport
More informationAgilent 81600B Tunable Laser Source Family Technical Specifications August New model: nm, low SSE output!
New model: 1260 1375 nm, low SSE output! Agilent Tunable Laser Source Family Technical Specifications August 2004 The Agilent Tunable Laser Source Family offers the from 1260 nm to 1640 nm with the minimum
More informationAgilent 83437A Broadband Light Source Agilent 83438A Erbium ASE Source
Agilent 83437A Agilent 83438A Erbium ASE Source Product Overview H Incoherent light sources for single-mode component and sub-system characterization The Technology 2 The Agilent Technologies 83437A (BBLS)
More informationBroadcast Television Measurements
Broadcast Television Measurements Data Sheet Broadcast Transmitter Testing with the Agilent 85724A and 8590E-Series Spectrum Analyzers RF and Video Measurements... at the Touch of a Button Installing,
More informationWe bring quality to light. SNT 10 DC Power Supply
We bring quality to light. SNT 10 DC Power Supply State-of-the-art choice for a reliable, high power DC supply The SNT 10 DC Power Supply is a precision tool developed to meet the needs of the automotive
More informationAgilent Understanding the Agilent 34405A DMM Operation Application Note
Agilent Understanding the Agilent 34405A DMM Operation Application Note Introduction Digital multimeter (DMM) is a basic device in the electrical world and its functions are usually not fully utilized.
More informationMicrowave Counter, Power Meter and DVM in One Portable Package
Agilent 53140 Series Microwave Counter, Power Meter and DVM in One Portable Package Product Overview Everything you need for the installation and maintenance of microwave links: A choice of frequency counter
More informationAgilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet
Agilent Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Data Sheet Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical power of laser
More informationAgilent E5500 Series Phase Noise Measurement Solutions Product Overview
Agilent E5500 Series Phase Noise Measurement Solutions Product Overview E5501A/B E5502A/B E5503A/B E5504A/B 50 khz to 1.6 GHz 50 khz to 6 GHz 50 khz to 18 GHz 50 khz to 26.5 GHz The Agilent E5500 series
More informationAgilent N4876A 28 Gb/s Multiplexer 2:1
Agilent N4876A 28 Gb/s Multiplexer 2:1 Data Sheet Revision 1.0 Features and Benefits Variable data rate up to 28.4 Gb/s Multiplexes two generator channels Front-end box for J-BERT or ParBERT Control via
More informationAgilent 4-Port PNA-L Microwave Network Analyzer
Agilent 4-Port PNA-L Microwave Network Analyzer N523A 3 khz to 13.5, 2 GHz Data Sheet Note: Specification information in this document is also available within the PNA-L network analyzer s internal Help
More informationExceptional performance
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Agilent 11970 Series Harmonic Mixers Data Sheet 18 to 110 GHz 11970K*, 11970A, 11970Q, 11970U, 11970V, 11970W For use
More informationAgilent Series Preselected Millimeter Mixers
Agilent 11974 Series Preselected Millimeter Mixers RF Sections Available in Four Bands from 26.5 to 75 GHz Data Sheet For the first time, preselected signal analysis is available to 75 GHz. With preselection,
More informationAgilent 87405C 100 MHz to 18 GHz Preamplifier
Agilent 8745C 1 MHz to 18 GHz Preamplifier Technical Overview Key Features Rugged, portable design for ease of use in the field Probe-power bias connection eliminates the need for an additional power supply
More informationAgilent E4430B 1 GHz, E4431B 2 GHz, E4432B 3 GHz, E4433B 4 GHz Measuring Bit Error Rate Using the ESG-D Series RF Signal Generators, Option UN7
Agilent E4430B 1 GHz, E4431B 2 GHz, E4432B 3 GHz, E4433B 4 GHz Measuring Bit Error Rate Using the ESG-D Series RF Signal Generators, Option UN7 Product Note Introduction Bit-error-rate analysis As digital
More informationProduct Brochure Version R&S RSC Step Attenuator Where precise signal levels count
Product Brochure Version 02.00 Step Attenuator Where precise signal levels count RSC_bro_en_5214-4413-12_v0200.indd 1 07.09.2018 10:36:40 Step Attenuator At a glance The is a switchable, mechanical step
More informationR-1580A Microwave Downconverter. Product Brochure
R-1580A Microwave Downconverter Product Brochure Jan 2018 Highlights The DSII Model R-1580A Microwave Downconverter extends the coverage of the R-1550A, or other DSII wide range receivers, to 22 GHz. The
More informationAgilent 83000A Series Microwave System Amplifiers
Agilent 83000A Series Microwave System Amplifiers Product Overview Agilent Technologies Microwave System Amplifiers 83006A 10 MHz to 26.5 GHz 83017A 500 MHz to 26.5 GHz 83018A 2 to 26.5 GHz 83020A 2 to
More informationInstruction Manual. Series 3000 Model R-165A. Audio/Video IF/RF Relay Panel. CATV Switching and Control
Series 3000 Model R-165A Audio/Video IF/RF Relay Panel Instruction Manual CATV Switching and Control 585-765-2254 fax 585-765-9330 100 Housel Ave. Lyndonville NY 14098 www.monroe-electronics.com Table
More informationMemory-Depth Requirements for Serial Data Analysis in a Real-Time Oscilloscope
Memory-Depth Requirements for Serial Data Analysis in a Real-Time Oscilloscope Application Note 1495 Table of Contents Introduction....................... 1 Low-frequency, or infrequently occurring jitter.....................
More informationRS-232/UART Triggering and Hardware-Based Decode (N5457A) for Agilent InfiniiVision Oscilloscopes
Find and debug intermittent errors and signal integrity problems faster RS-232/UART Triggering and Hardware-Based Decode (N5457A) for Agilent InfiniiVision Oscilloscopes Data Sheet Features: RS-232/UART
More informationAgilent E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors
View at www.testequipmentdepot.com Agilent E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors Data Sheet Test Equipment Depot - 800.517.8431-99 Washington Street
More informationAgilent Migration from 8712/8714 Series to ENA-L Network Analyzers
Agilent Migration from 8712/8714 Series to ENA-L Network Analyzers Technical Overview The Standard Just Got Better! Enhanced usability and performance Affordably priced Minimal software migration A new
More informationProcess Transmitter RMA 422
Technical Information TI 072R/24/ae Process Transmitter RMA 422 Multi-functional 1-2 channel top hat DIN rail unit with loop power supply, alarm set point monitoring, mathematics function and 1-2 analog
More informationAgilent E4887A HDMI TMDS Signal Generator Platform
Agilent E4887A HDMI TMDS Signal Generator Platform Data Sheet Version 1.9 Preliminary E4887A- 007 E4887A- 037 E4887A- 003 Page Convenient Compliance Testing and Characterization of HDMI 1.3 Devices The
More informationCAN/LIN Measurements (Option AMS) for Agilent s InfiniiVision Series Oscilloscopes
CAN/LIN Measurements (Option AMS) for Agilent s InfiniiVision Series Oscilloscopes Data Sheet Debug the signal integrity of your CAN and LIN designs faster Introduction The Agilent Technologies InfiniiVision
More informationPM Series Microwave Power Calibration System
PM Series Microwave Power Calibration System Supports Sensors from most major manufactures up to 50 GHz Faster than direct compare method Lowest total uncertainty National Metrology Institute class thermistor
More informationAgilent N5120A Baseband Studio for CPRI RE Test
Agilent N5120A Baseband Studio for CPRI RE Test Technical Overview The Agilent N5120A Baseband Studio for CPRI RE Test is the first commercially available CPRI radio equipment test solution The N5120A
More informationPM Series Microwave Power Calibration System
PM Series Microwave Power Calibration System Supports Sensors from most major manufacturers from 6 khz to 50 GHz Faster than direct compare method Lowest total uncertainty National Metrology Institute
More informationAgilent Series Harmonic Mixers
Agilent 11970 Series Harmonic Mixers Data Sheet 18 to 110 GHz 11970K*, 11970A, 11970Q, 11970U, 11970V, 11970W For use with the Agilent E4407B, 8560E/EC Series, 8566B, 71000 Series, and PSA Series spectrum
More informationR&S RSC Step Attenuator Where precise signal levels count
Test & Measurement Product Brochure 01.00 Step Attenuator Where precise signal levels count Step Attenuator At a glance The is a switchable, mechanical step attenuator. It is available in various models
More informationSELECTION GUIDE Series of RF and Universal Frequency Counter/Timers
SELECTION GUIDE 53200 Series of RF and Universal Frequency Counter/Timers With the Keysight Technologies, Inc. 53200 RF and Universal Frequency Counters/Timers, You Get: More bandwidth 350 MHz baseband
More informationR&S FPC-Z10 Teaching Kit Getting Started
R&S FPC-Z10 Teaching Kit Getting Started 1178843602 Getting Started Version 03 This manual describes the following products: R&S FPC-Z10 Teaching Kit (1328.7338.02) 2018 Rohde & Schwarz GmbH & Co. KG Mühldorfstr.
More informationAgilent 86120B, 86120C, 86122B Multi-Wavelength Meters. Data Sheet
Agilent 86120B, 86120C, 86122B Multi-Wavelength Meters Data Sheet Agilent multi-wavelength meters are Michelson interferometer-based instruments that measure wavelength and optical power of laser light
More informationR&S ZVA-Zxx Millimeter-Wave Converters Specifications
R&S ZVA-Zxx Millimeter-Wave Converters Specifications Data Sheet Version 19.00 CONTENTS Definitions... 3 General information... 4 Specifications... 5 Test port... 5 Source input (RF IN)... 5 Local oscillator
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) For more information about Agilent Technologies test and measurement products, applications, services, and for a current
More informationCS Series Motorized Coaxial Transfer Switches
CS Series Motorized Coaxial Transfer Switches Features 3 or 4 port configurations Three port application require only the addition of a shorting cap Non-volatile position memory VSWR
More informationQCA9-33 Active Combiner
Product Manual QCA9-33 Active Combiner April 13, 2012 Table of Contents Table of Contents... 2 Overview... 3 Specifications... 4 Installation... 5 Basic Setup... 5 16-Channel Operation... 5 16-64 Channel
More informationAgilent Technologies N5454A Segmented Memory Acquisition for Agilent InfiniiVision Series Oscilloscopes
Agilent Technologies N5454A Segmented Memory Acquisition for Agilent InfiniiVision Series Oscilloscopes Data Sheet Capture more signal detail with less memory using segmented memory acquisition Features:
More informationMILLIMETER WAVE VNA MODULE BROCHURE
MILLIMETER WAVE VNA MODULE BROCHURE General Information OML, founded in 1991, is an expert at millimeter wave (mm-wave) measurements. Our successful foundation is built on mm-wave S-parameter measurements,
More informationUSER INSTRUCTIONS MODEL CSI-200 COAXIAL SYSTEM INTERFACE
USER INSTRUCTIONS MODEL CSI-200 COAXIAL SYSTEM INTERFACE 9350-7676-000 Rev B, 5/2001 PROPRIETARY NOTICE The RTS product information and design disclosed herein were originated by and are the property of
More informationAgilent 8510XF Vector Network Analyzer Single-Connection, Single-Sweep Systems Product Overview
Agilent 8510XF Vector Network Analyzer Single-Connection, Single-Sweep Systems Product Overview Discontinued Product Information For Support Reference Only Information herein, may refer to products/services
More informationAgilent N4876A 28 Gb/s Multiplexer 2:1
Agilent N4876A 28 Gb/s Multiplexer 2:1 Data Sheet, Revision 1.1 Features and Benefits Variable data rate up to 28.4 Gb/s Multiplexes two generator channels Front-end box for J-BERT or ParBERT Control via
More informationOver 5000 VXI cards and mainframes in stock. 1000's of pieces of Test Equipment in stock. Looking for Test Equipment? Visit us on the web at www.recycledequipment.com Recycled Equipment buys, sells, and
More informationwww MK-Electronic de DeskJet 350C HP Parts Reference Guide Case Parts Electronic Accessories Electronics/Power Supply Case Control Panel Door Lock
www.hp.comgohpparts Case Parts Case 1 C2697-67008 Case A - Paper input side of case assembly 2 C2697-67009 Case B - Paper output side of case - Without door 3 C2697-67016 Battery case - Battery pack plug-in
More informationAnalog Dual-Standard Waveform Monitor
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Analog Dual-Standard Waveform Monitor 1741C Datasheet Additional Analysis Features Timing Display for
More informationAgilent Technologies Pulse Pattern and Data Generators Digital Stimulus Solutions
Agilent Technologies Pattern and Data Generators Digital Stimulus Solutions Leading pulse, pattern, data and clock generation for all test needs in digital design and manufacturing Pattern Generators Agilent
More informationFOM-9010, FOM-9011 and FOM-9012
Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form
More information.Power Distribution Center. PD-1. Instruction Manual
.Power Distribution Center. PD-1 Instruction Manual www.datavideo-tek.com 1 Contents Warnings and Precautions... 3 Warranty... 4 Standard Warranty... 4 Two Year Warranty... 4 Disposal... 4 Packing List...
More informationC3397A DeskJet 350 Macintosh adapter - Connects HP DeskJet 340 to Macintosh - Includes I/O cable, driver & font disks
www.hp.comgohpparts Case Parts Case 1 C2697-67008 Case A - Paper input side of case assembly 2 C2697-67009 Case B - Paper output side of case - Without door 3 C2697-67016 Battery case - Battery pack plug-in
More informationAgilent M9362A-D01-F26 PXIe Quad Downconverter
Agilent M9362A-D01-F26 PXIe Quad Downconverter 10 MHz to 26.5 GHz Data Sheet Challenge the Boundaries of Test Agilent Modular Products OVERVIEW Introduction The Agilent M9362A-D01-F26 is a PXIe 3-slot,
More informationAutomatic Changeover Unit ECO8000 Datasheet
Automatic Changeover Unit ECO8000 Datasheet The ECO8000 is a highly versatile automatic sync and signal changeover unit with configurations and capabilities required to address modern master sync application
More informationTranscom Instruments. Product Brochure TRANSCOM INSTRUMENTS. Product Brochure. 1
TRANSCOM INSTRUMENTS Product Brochure Transcom Instruments Product Brochure www.transcomwireless.com 1 T5000 Series Bench-top Vector Network Analyzer Overview T5000 Series Bench-top Vector Network Analyzer
More informationKeysight Technologies ad Integrated RF Test Solution
Keysight Technologies 802.11ad Integrated RF Test Solution E7760A Wideband Transceiver M1650A mmwave Transceiver Data Sheet Introduction Design your 802.11ad device with confidence Evaluating devices at
More informationProduct Brochure Version R&S OSP Open Switch and Control Platform Modular solution for RF switch and control tasks
Product Brochure Version 10.01 R&S OSP Open Switch and Control Platform Modular solution for RF switch and control tasks OSP_bro_en_5214-1437-12_v1001.indd 1 03.11.2017 13:32:24 R&S OSP Open Switch and
More information8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit. Applicable Upgrade Kit Model Number
Installation Note 8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit Network Analyzer Model Number 8753E 8753ET 8753ES Applicable Upgrade Kit Model Number
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More informationTemposonics. Magnetostrictive Position Sensors. L Series (Model LH) to G-Series Linear-Position Sensor. Cross Reference A
Temposonics Magnetostrictive Position Sensors L Series (Model LH) to G-Series Linear-Position Sensor 550956 A Cross Reference Replacement and retrofit options for the L-Series Model LH sensor L-Series
More informationTelemetry Receiver Installation Guide
BBV Telemetry Receiver Installation Guide Models covered Rx200 Building Block Video Ltd., Unit 1, Avocet Way, Diplocks Industrial Estate, Hailsham, East Sussex, UK. Tel: +44 (0)1323 842727 Fax: +44 (0)1323
More informationAgilent 8757D Scalar Network Analyzer
Agilent 8757D Scalar Network Analyzer Data Sheet Accurate measurement of transmission and reflection characteristics is a key requirement in your selection of a scalar network analyzer. To help you achieve
More informationAutomatic Changeover Unit ECO8020 Datasheet
Automatic Changeover Unit ECO8020 Datasheet The ECO8020 is a highly versatile automatic sync and signal changeover unit with configurations and capabilities required to address modern master sync application
More informationDirectional Couplers and Splitters
Directional couplers and splitters divide trunk and feeder lines. 17-Amp current handling capacity. Excellent hum-modulation performance. 1/2-inch hard-line ports have extra length, creating a better seal
More informationM4000 Diagnostic Test System For Power Apparatus Condition Assessment
Knowledge Is Power SM The World Leader in Diagnostic Test Instruments and Knowledge Services for Electric Power M4000 Diagnostic Test System For Power Apparatus Condition Assessment The world s most advanced
More informationR&S ZN-Z32/-Z33 Automatic In-line Calibration Modules Ensuring high accuracy with thermal vacuum testing and multiport measurements
R&S ZN-Z32/-Z33 Automatic In-line Calibration Modules Ensuring high accuracy with thermal vacuum testing and multiport measurements Product Brochure Version 01.01 R&S ZN-Z32/-Z33 Automatic In-Line Calibration
More informationSpecifications. End-Point Linearity - ±5% F.S., when used with HACO SCR-speed control
Specifications Model 552 Catalog No. Model Power 55-0665 552 115 VAC, 50-60 Hz 55-0673 552A 230 VAC, 50-60 Hz Input - Single-ended, DC coupled 0 to +10V. Signal source can be Floating (not referenced to
More informationNoise Detector ND-1 Operating Manual
Noise Detector ND-1 Operating Manual SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2 Louisville, CO 80027 Phone: (303) 665-1852 Fax: (303) 604-6088 Table of Contents ND-1 Description...... 3 Safety and Preparation
More informationMulti-Key v2.4 Multi-Function Amplifier Keying Interface
Multi-Key v2.4 Multi-Function Amplifier Keying Interface ASSEMBLY & OPERATION INSTRUCTIONS INTRODUCTION The Harbach Electronics, LLC Multi-Key is a multi-function external device designed for the safe
More informationSWR Programmable Audio Switcher U S E R S M A N U A L
SWR-2755 Programmable Audio Switcher U S E R S M A N U A L SWR-2755 Programmable Switcher User s Manual Setup and Installation Guide Copyright 1999 2005 Audio Precision, Inc. All rights reserved. Part
More informationRack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
More informationTeamWork Installation Guide
C G G 00-0V/ A MAX TX RX +V APARATUS US 0 TeamWork Installation Guide TeamWork TeamWork is a fully customizable collaboration system comprised of an switcher, Show Me cables, a control processor, and a
More informationInstallation Note. Option GHz Operation Upgrade Kit. For 8753E and 8753ES Network Analyzers. Applicable Upgrade Kit Model Number
Installation Note Option 006 6 GHz Operation Upgrade Kit For 8753E and 8753ES Network Analyzers Network Analyzer Model Number Applicable Upgrade Kit Model Number 8753E 8753EU Option 006 8753ES 8753ESU
More informationQDA4-44 RF Amp/Combiner
Product Manual QDA4-44 RF Amp/Combiner May 17, 2012 Table of Contents Table of Contents... 2 Overview... 3 Specifications... 4 Installation... 5 Basic Setup... 5 Rack Mounting... 6 RK2 Dual Rack Kit with
More information6000 Series Patch Panel Terminating Instructions
6000 Series Patch Panel Terminating Instructions INTRODUCTION The 6000 Series patch panels include a unique feature not found on any other patch panel. This feature allows you to angle each of the four
More informationJD725A Cable and Antenna Analyzer - Dual Port
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS JD725A Cable and Antenna Analyzer - Dual Port Key Features Portable and lightweight handheld instrument Built-in wireless frequency bands as well as the most
More informationUser Guide. Centrex Recording Interface
User Guide Centrex Recording Interface Table of Contents Introduction... 2 The Meridian Business Set... 3 Key Numbering Plan (18 button add-on)... 4 Key Numbering Plan (36 button add-on)... 5 Key Numbering
More informationUser Manual. Model 1372A and 1374A HDMI Switchers. 1T-SX-632 Model 1372A 2X1 Switcher. v1.3 2x1 SWITCHER. v1.3 INPUT ENHANCE POWER
User Manual 1T-SX-632 Model 1372A 2X1 Switcher v1.3 v1.3 2x1 SWITCHER 1 2 INPUT ENHANCE POWER 1 2 INPUT ENHANCE POWER Model 1372A and 1374A HDMI Switchers Table Of Contents 1.0 Introduction.......................
More informationDescription. Specifications and Ordering Information 1900/27 Vibration Monitor
R Specifications and Ordering Information 1900/27 Vibration Monitor Description The 1900/27 is a single-channel, stand-alone, locally mounted vibration monitor. It can be used as a stand-alone machinery
More informationLINE DRIVERS MANUAL PART NUMBER: DA3000TM0 1-IN, 1-OUT COMPOSITE VIDEO + AUDIO LINE DRIVER TABLE MOUNT USER S GUIDE
MANUAL PART NUMBER: 400-0175-001 DA3000TM0 1-IN, 1-OUT COMPOSITE VIDEO + AUDIO LINE DRIVER TABLE MOUNT USER S GUIDE TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS... 2 GENERAL... 2 INSTALLATION...
More informationMAX2660/MAX2661/MAX2663/MAX2671 Evaluation Kits
9-382; Rev ; 9/99 MAX2660/MAX266/MAX2663/MAX267 General Description The MAX2660/MAX266/MAX2663/MAX267 evaluation kits simplify evaluation of the MAX2660/MAX266/ MAX2663/MAX267 upconverter s. They enable
More informationKeysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview
Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument
More informationProduct Brochure Version R&S OSP Open Switch and Control Platform Modular solution for RF switch and control tasks
Product Brochure Version 12.00 R&S OSP Open Switch and Control Platform Modular solution for RF switch and control tasks R&S OSP Open Switch and Control Platform At a glance The modular R&S OSP open switch
More informationOPERATIONAL MANUAL EMZS CH Speaker Zone Selector. Version 1.6
OPERATIONAL MANUAL EMZS-8012 12CH Speaker Zone Selector Version 1.6 1 Product Overview The EMZS-8012 is a 1U rack-mounting unit, provide 12 channel direct zone switching for single source public address
More informationModel P/03P Upconverters
Instruction Manual Model 2005-02P/03P Upconverters October 2013, Rev H 2005 TEST UPCONVERTER GHz 100MHz10MHz 1MHz C KU 70 140 IF IN GAIN DC POWER +DC IN +15V, 200 ma RF OUT DC ALARM LO IF FREQUENCY J1
More informationKeysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview
Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument
More informationSCM820 Digital IntelliMix Automatic Mixer SEAMLESS MIXING. ADVANCED CONTROL.
SCM820 Digital IntelliMix Automatic Mixer SEAMLESS MIXING. ADVANCED CONTROL. SCM820 Digital IntelliMix Automatic Mixer The SCM820 is the flagship Shure digital automatic mixer for seamless, natural-sounding
More informationR&S ZN-Z85 Switch Matrix Specifications
R&S ZN-Z85 Switch Matrix Specifications Data Sheet Version 01.02 CONTENTS Definitions... 3 Block diagrams... 4 Specifications... 5 General features... 5 Performance data... 5 Remote control... 5 Switching
More information