0.6. SCENE LED SCE & SCEM SERIES Pendant, Recessed & Surface Luminaires

Transcription

1 0.6 SCEE LED SCE & SCEM SERIES Pendant, Recessed & Surface Luminaires

2 SCEE LED SCE SERIES Pendant, Recessed & Surface Introducing the SCEE LED series, a full family of architecturally engineered luminaires equipped with AccuRay optical technology. Designed to be the thinnest profile in architectural commercial, retail and healthcare lighting, SCEE not only delivers the lumen output and distribution curve required, it also offers visual therapy and branding power to any application. The carefully constructed mechanical and LED coupling design allows the light beam to continuously be bent in shape for optimal control, all the while completely concealing the LED array for 100% glare-free effect. The exterior profile follows a chic 0.6 profile with brushed corners for an elegant appearance. The SCEE Series is available in pendant, recessed, and horizontal and vertical surface mounting in 1X and X models. This offers unlimited design flexibility by using those models in any configurations desired to create single or multiple murals for your design. Suited for medical, MRI room or simply any commercial applications in staggered or continuous row mounting. x SCEE AccuRay Luminaire Level Wattage Lumens Delivered Efficacy Fluorescent Equivalent Fluorescent Equivalent (W) Energy Savings* 7 9 T8/T5 9 9% T8/T5 59 8% T5HO 55 % T5HO 8 9% * Energy Savings based upon standard lamp/ballast combination using an equivalent FL system (TC). SCEE s SD lens used in the above comparison chart.

3 TECHOLOGY ACCURAY The light emitted by the MetaLED mid-flux LEDs is channeled inside Metalumen s AccuRay optical plane where a precisely controlled micro dot matrix pattern directs, shapes and distributes the light throughout the material. A high performance optical reflector and diffuser further guide and extract the light with superb efficiency and beam control. LED With building code standards improving, luminaires today struggle to meet the criteria necessary for the modern office environment and energy savings. The high efficacy LED system and optical design coupled with standard 0-10V dimming tunable driver allows easy and flexible integration with the latest lighting control systems, occupancy sensors, and daylight harvesting controls. ot only is it a logical transition from FL to LED, but from current LED to LED high efficacious and efficient luminaire system. DRIVER Metalumen offers 0-10V dimming drivers as a standard. Dimming range is down to 10%. Dimming drivers are available down to 1%. Power full load is >90% with a Class rating. Metalumen s -White Tunable LED Board 6500K 700K Eliminates Glare Maximum uniformity and extremely high vertical cutoff. Wide distribution for shortest suspension lengths. Designed around the LED engine with precise LED coupling mechanics causing minimal light loss. Maximum beam controls right at the source. Efficacy improves dramatically. ot to scale. For demonstration purposes only. 5

4 PEDAT RECESSED ORDERIG LOGIC Example: SCE-5K--QQ-C-1-P---R ORDERIG LOGIC Example: SCE-5K--PQ-W-1-D--- Color Temp 0K 5K 0K 0K 000K 500K 000K 5000K Color Temp 0K 5K 0K 0K 000K 500K 000K 5000K Size 1 Optics Finish Level/ PQ QQ CC PS SD CG W C AM x 1x Perforated Square (x ) Square in Square (x ) Circle in Circle (x ) Perforated Strip (1x ) Standard Diffuse (x & 1x ) Custom Graphic* (x & 1x ) * Available for and only White Custom Anti-microbial White Paint Refer to page 19 for Levels [1.0] 1x File ame SCE-5K-1-PS lms/w Perforated Strip Size 1 Optics Finish Level/ PQ QQ CC PS SD CG W C AM x 1x Perforated Square (x ) Square in Square (x ) Circle in Circle (x ) Perforated Strip (1x ) Standard Diffuse (x & 1x ) Custom Graphic* (x & 1x ) * Available for and only White Custom Anti-microbial White Paint Refer to page 19 for Levels 50. [.0] 1.5 1x File ame 01 [11.9] SCE-5K-1-PS lms/w Perforated Strip Circuitry 1 1 Circuit Circuitry 1 1 Circuit Mounting P1 P P Voltage 1 Controls Location V X R RC Power over Aircraft Cable 18 Power over Aircraft Cable 8 Power over Aircraft Cable 60 10V 77V 7V (Consult factory) Universal one Module to -Dimmers** Module to DMX** ** Available with -White Tunable option only. Standard DMX system by others required for option X, or standard 0-10V dimmers - one for intensity and another for CCT mix required for option V Remote Remote Surface Canopy 1.5 x File ame 6.0 [5.0] SCE-5K--QQ- 51 lms/w Square in Square Mounting D T Voltage 1 Controls Location V X R Recessed Drywall Recessed T-Bar 10V 77V 7V Universal (10-77V) one Module to -Dimmers** Module to DMX** ** Available with -White Tunable option only. Standard DMX system by others required for option X, or standard 0-10V dimmers - one for intensity and another for CCT mix required for option V one (Integral) Remote 9.7 [.0] 1. x File ame 60.0 [.7] SCE-5K--PQ lms/w Perforated Square 6 7

5 SURFACE ORDERIG LOGIC Example: SCE-5K-1-SD-W-1-S-1- Color Temp 0K 5K 0K 0K Size 1 000K 500K 000K 5000K x 1x 7.8 [1.5] 15.1 Optics Finish PQ QQ CC PS SD CG W C AM Perforated Square (x ) Square in Square (x ) Circle in Circle (x ) Perforated Strip (1x ) Standard Diffuse (x & 1x ) Custom Graphic* (x & 1x ) * Available for and only White Custom Anti-microbial White Paint 1x File ame 01 [11.9] SCE-5K-1-SD lms/w Standard Diffuse Level/ Refer to page 19 for Levels 1x SCEE AccuRay Luminaire Level Wattage Lumens Delivered Efficacy Fluorescent Equivalent Fluorescent Equivalent (W) Energy Savings* T8/1T5 6 % T8/T5 7 % T8/T5 108 % T5HO 1 % * Energy Savings based upon standard lamp/ballast combination using an equivalent FL system (TC). SCEE s SD lens used in the above comparison chart. Circuitry 1 1 Circuit Mounting S SI SC Voltage 1 Controls V X Surface (Remote ) Surface Integral (Integral ) Concrete or Metal surface (Integral ) (Available for vertical or horizontal mounting) 10V 77V 7V Universal (10-77V) one Module to -Dimmers** Module to DMX** ** Available with -White Tunable option only. Standard DMX system by others required for option X, or standard 0-10V dimmers - one for intensity and another for CCT mix required for option V. [1.] 1.5 x File ame 60.0 [.7] SCE-5K--CC- 51 lms/w Circle in Circle 8 9

6 COTROL OPTIOS MEDICAL CETRE CALCULATIO -White Tunable Module by Metalumen -White Tunable 700K 000K 500K 6500K DMX wired communication via COM ports with up to 51 addresses Dimming using a 0-10V dimmer connected to the COM ports Max Output Channels Max Output Power [W] Max Channel Power [W] Control over Dim 0-10V Dim Dim Minimum % 0-10V-CCT/Intensity OPTIO CODES V * X % * Dim minimum limited by driver specs Room Size: 78. x 5.8 Ceiling Height: 10 WIRIG DIAGRAM Dual 0-10V Dimmer Configuration Avg. Horizontal Level 0 FC Avg/Min 1. Max/Min 1.5 LIE EUTRAL GD DMX Configuration LIE EUTRAL GD Constant Current -White Tunable Control Options (By Others): Standard 51 channel DMX system by Lutron, Fulham, etc... (requires complete DMX system) Standard 0-10V dimmers: one for Intensity and another for CCT mix. LED + LED - DIM + DIM V Dimmer Intensity Constant Current LED + LED - DIM + DIM - DMX Controller CCT mix and/or intensity DMX Cable DATA+ DATA- DC I DIM COM DC I DIM COM P G A B P G A B 0-10V Dimmer CCT mix APT - CC APT - CC OUTPUT OUTPUT CH CH1 CH CH1 SYSTEM EERGY & MAITEACE SAVIGS Annual Operating Cost Energy & Lamp Maintenance $500 $000 $1500 $1000 $500 0 $1,78 $0 $,9 $,088 LED Energy Traditional Lamp Maintenance Payback Analysis Average Annualized Savings Per Year Annual Energy Savings $755 Annual Lamp Maintenance Savings $,088 Annual Combined Savings $,8 Cost of Waiting (Monthly) $7 Simple Payback (years) 1.16 IRR (%) 86% 10 Year Cash Flow (Energy & Lamp Maintenance) $5,1 System Energy & Maintenance Cost Summary LED Traditional Total Initial Fixture/Installation Cost $8,61 $5,075 Total System kw.79 5 Annual kwh 1,81 19,856 Cost of Energy per kwh $0.10 $0.10 kwh Inflation Rate (%/yr) 1.00% 1.00% Average Annual Energy Cost $1,78 $,9 Average Annual Maintenance Cost $0 $,088 Average Annual Energy & Maintenance Costs $1,78 $,580 Average Annual Energy & Maintenance Savings $,8 Savings Cost/year Annual Cumulative LED Traditional 1st Year $7 $7 $1,661 $,8 5th Year $,8 $10,8 $1,69 $,518 10th Year $,8 $5,1 $1,78 $,580 Cost Savings LED Traditional 10 Year Total $8,8 $17,77 $5,805 *** Calculation is based on actual LED fixture used in comparison to a -T5 8W FL fixture. Assumptions are $0.1 per KWh and 10 operating Hours/day full power). These are estimated savings only. Annual and monthly savings are based on a number of variables and assumptions that could change over time. The actual savings derived by our firm may be higher or lower. Metalumen s business does not imply a warranty of performance or savings as calculated and shown within this document

7 SCEE LED SCEM SERIES Surface & Recessed With ambiance, visual interest, uplifting energy and soothing influence, these luminaires combine leading edge technology with good lighting practice. Studies have shown the positive effect of imagery, especially in healthcare facilities, on human wellness and reduction of anxiety and stress levels. This methodology is used in patient rooms and MRI facilities to divert patients attention during treatment or examination. SCEE offers few standard patterns and opens the custom imagery to anything desired by the application - simply supply us with any high resolution image and we will make it happen. 1 1

8 MRI COMPLIAT O-FERROUS COMPOETS Due to the strong MRI magnetic force, a projectile effect of over 0mph into the tube can be generated by even small ferrous objects, potentially causing serious injury. Therefore, all MRI fixtures are carefully engineered with non-ferrous materials. Housings are made from aluminum extrusion, internal parts are built from aluminum or plastics, and all hardware are stainless steel. REMOTE MOUTIG All MRI compliant luminaires are to have remote mounted drivers due to the steel components used in building the LED drivers. In an LED configuration, the electricity going from the driver to the fixture is Direct Current (DC) which further reduces the chance of interference. ELECTROIC O-ITERFERECE Luminaires meet the most stringent requirements for electromagnetic compatibility. MRI machines emit powerful radio frequency pulses and imaging may be compromised by electronics interference within the area. All fixtures should not interfere with, nor should they be susceptible to, these frequencies. An RFI/EMI filter can be utilized to eliminate interference. 1 15

9 THE SCEE IS SUITABLE FOR A VARIETY OF MEDICAL SETTIGS: Waiting Rooms Corridors ICU MRI rooms Dentist offices Reception areas Lobbies Cafeterias RECESSED ORDERIG LOGIC Example: SCEM-5K--QQ-AM-1-D--V- SURFACE ORDERIG LOGIC Example: SCEM-5K--QQ-AM-1-S---RF Color Temp 0K 5K 0K 0K 000K 500K 000K 5000K Color Temp 0K 5K 0K 0K 000K 500K 000K 5000K Size 1 x 1x Size 1 x 1x Optics PQ QQ CC PS SD CG Perforated Square (x ) Square in Square (x ) Circle in Circle (x ) Perforated Strip (1x ) Standard Diffuse (x & 1x ) Custom Graphic* (x & 1x ) * Available for and only Optics PQ QQ CC PS SD CG Perforated Square (x ) Square in Square (x ) Circle in Circle (x ) Perforated Strip (1x ) Standard Diffuse (x & 1x ) Custom Graphic* (x & 1x ) * Available for and only Finish AM Anti-microbial White Paint Finish AM Anti-microbial White Paint Level/ Refer to page 19 for Levels Level/ Refer to page 19 for Levels Circuitry 1 1 Circuit Circuitry 1 1 Circuit Mounting D T Voltage 1 Controls Options V X RF Recessed Drywall Recessed T-Bar 10V 77V 7V Universal (10-77V) one Module to -Dimmers** Module to DMX ** ** Available with -White Tunable option only. Standard DMX system by others required for option X, or standard 0-10V dimmers - one for intensity and another for CCT mix required for option V one RFI (Radio Frequency Interference) / EMI (Electromagnetic Interference) Filter Mounting S Surface Voltage 1 Controls Options V X RF 10V 77V 7V Universal (10-77 V) one Module to -Dimmers** Module to DMX ** ** Available with -White Tunable option only. Standard DMX system by others required for option X, or standard 0-10V dimmers - one for intensity and another for CCT mix required for option V one RFI (Radio Frequency Interference) / EMI (Electromagnetic Interference) Filter 16 17

10 DIMESIOS SCE OPTICAL SYSTEM CRI Body is constructed with gauge cold rolled steel, 0 gauge aluminum and welded seams. SCEM Level A 100% aluminum body with welded seams and stainless steel hardware. B Pendant A 6.0 [5.0] B [19.7] The light emitted from the MetaLED midflux LEDs is channeled inside Metalumen s AccuRay optical plane where a precisely controlled micro dot matrix pattern directs, shapes and distributes the light throughout the material. A high performance optical reflector and diffuser further guide and extract the light with superb efficiency and beam control. Standard graphics are available. Custom graphics must be provided by customer in PDF format. A Recessed & Surface A 60.1 [.7] B 58.5 [1.] B 569 [.] 8+ (500K) (80 minimum) Consult factory for 90+ CRI [.5] Level 1x HOUSIG LUMIAIRE WATTAGE AD OUTPUT SPECIFICATIO x SPECIFICATIOS Perforated Square (PQ) Square in Square (QQ) Circle in Circle (CC) Standard Diffuse (SD) Perforated Strip (PS) Standard Diffuse (SD) Graphic Size STADARD OPTICS At an ambient operating temperature of LUME MAITEACE 5 C the LED lifetime expectancy hrs at 0. FIISH MOUTIG DRIVER APPROVALS Matte powder coat Highly reflective, antimicrobial white white paint (91% paint reflectance). Anti-microbial white paint. Consult factory for custom finish. Pendant Recessed Surface Recessed Surface C D PQ - Perforated Square E Pendant C 11.0 [8.9] D 111. [.9] E 0.0 [1.0] F 0.5 [8.0] Certified to RTL safety and IES Recommendation testing standards. All components are UL/CSA/QPS recognized or listed, RoHS, LM79, LM80 and LM8 compliant. locations. Suitable for dry or damp locations. CC - Circle In Circle SD - Standard Diffuse F Metalumen offers dimming drivers as a standard on our entire LED product offering at 0-10V. Dimming is 10%-100% range Power factor is <90% with a Class rating. EVIROMET Suitable for dry QQ - Square in Square Recessed & Surface C 11.0 [7.7] D [.8] E 01.0 [11.9] F 1.0 [9.5] PS - Perforated Strip SD - Standard Diffuse 11.0 [5.0] 68.0 [10.6] Graphic Size WARRATY Metalumen will warrant defective luminaires for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specification. If defective, Metalumen will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Metalumen. 18 WA R R A T Y 19

11 SCEE LED SCE & SCEM Series Pendant, Surface & Recessed Luminaires Metalumen Manufacturing Inc. 570 Southgate Drive Guelph, Ontario, Canada 1G P6 Toll Free: Tel: Fax: Mailing Address: PO Box 1779 Guelph, Ontario, Canada 1H 6Z9 All dimensions are nominal and subject to tolerances. We reserve the right to make changes that will not alter installed appearance, function or performance. These designs remain the property of Metalumen. We reserve the exclusive right to reproduce them and to manufacture the items illustrated herein. Some combinations may not be available, consult factory. Metalumen is a registered trademark. R Copyright 016 Metalumen Manufacturing Inc. All rights reserved.