3.5. Control Relays and Timers. Contents. 9575H Series 3000 Type AA, AC and DC. General Purpose Relays Type AA

Transcription

1 H Series 000 Relay Contents 9575H Series 000 Type AA, AC and DC Product Selection Accessories Technical Data and Specifications Dimensions Page V7-T-117 V7-T-117 V7-T-118 V7-T H Series 000 Type AA, AC and DC Product Type AA panel-mounted relays are rated (each pole) 40A up to 00 Vac, 50/60 Hz; 5A at 480/600 Vac, 50/60 Hz and 40A at 28 Vdc. Application 9575H Series 000 relays are ideal for applications when controlling smaller loads, such as single-phase motors. Standards and Certifications UL listed, E1491 CSA CE: EN , EN V7-T-116 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA E February 201

2 .5 Product Selection When Ordering, Specify Catalog number and magnet coil code letter. Example: for DPDT relay with auxiliary 9575H Series 000 Relay Accessories Enclosure NEMA 1 Enclosure Type AA Relays 1 Relay Style Relay (DPDT) Relay with auxiliary switch Relay with blowout magnets Relay with auxiliary switch and blowout magnets switch and a 120V 50/60 Hz coil, order Catalog Number 9575HA010. Catalog Number 9575H2449 Catalog Number H_ H_ H_ H_110 Notes 1 There are no repair parts available for these relays. 2 Underscore indicates missing code suffix for magnet coil see Selection table above. Only 9575H relays without an auxiliary switch should be mounted in the 9575H2449 enclosure. Coil Voltage Selection Coil Voltage Hz Suffix Code Volts AC /60 A /60 B 480/440 60/50 C 600/550 60/50 D /60 E /60 H 6 50/60 J 12 50/60 K 24 50/60 L 48 50/60 M Volts DC 110 P 220 Q 6 R 12 S 24 T 48 W Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA E February V7-T-117

3 .5 Technical Data and Specifications Relay Specifications Coil Pull-in voltage: 80% DC coils, 85% AC coils of nominal voltage or less at 25ºC Dropout voltage: 10% of nominal voltage or more at 25ºC Coil resistance: ±10% measured at 25ºC Max. DC coil dissipation capability: 4 watts DC continuous at 25ºC Contacts Contact combination: DPDT Contact rating each pole (main contacts): Each pole rated 40 amps up to 00 Vac, 50/60 Hz, 5 amps at 480/600 Vac 50/60 Hz, 0.75 PF load. 1-1/2 hp motor load (each pole) at Vac, 50/60 Hz. 2 hp motor load at Vac, 50/60 Hz only when using both poles to switch both sides of load, 40 amps at 28 Vdc resistive load each pole. NEMA A 600 pilot duty 50/60 Hz Additional contact ratings for relays with blowout magnets: 10A at 110 Vdc resistive, 4A at 225 Vdc resistive, 2A at 25 Vdc resistive. For inductive loads, contacts must be derated accordingly. Contact material: Silver cadmium oxide, gold flashed. 5/16 in (7.9 mm) diameter standard Dielectric Withstanding Voltage Between open contacts: 1500 V rms All other mutually insulated conductive elements: 2200 V rms Miscellaneous Coil terminals: 6 2 screws Contact terminals: 8-2 screws Main base material: Molded phenolic, UL recognized (QMFZ2) Weight (DPDT Relay): 11 oz (11 grams) approximately Weight (DPDT Relay with auxiliary switch) 14.5 oz (411 grams) approximately Average Operating Times (Milliseconds) Auxiliary Switch Specifications Contact combination: SPDT Contact rating: Auxiliary switch rated 10 amps at 125 or 250 Vac, resistive load; 1/4 hp at 125 or 250 Vac, motor load; 0.4 amps at 125 Vdc or 0.20 amps at 250 Vdc, resistive load; amps at 125 Vac lamp load. All AC ratings are 50/60 Hz Dielectric withstanding voltage: 500 Vac rms between open contacts, 1500 Vac rms between all other mutually insulated conductive elements Terminals: 4 40 round head screws for auxiliary contacts standard Operation DPDT Relay DPDT Relay with Auxiliary Switch Pickup Dropout 5 5 Temperature Ranges Temperature AC DC Operating range 0º to 55ºC 0º to 55ºC Non-operating range 0º to 100ºC 0º to 100 C V7-T-118 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA E February 201

4 General Purpose Plug-In Relays Type AA.5 Dimensions Approximate Dimensions in Inches (mm) 9575H DPDT Relay 9575H2449 Mounting Holes (4.75) Dia. (2 Places) 2.25 (58.7) Max. 8-2 Machine Screw on Contact Terminals (6 Places) (47.5) 0.8 (41.1) 2.50 (6.5) (9.5).12 (79.2) Max. 6-2 Machine Screw on Coil Terminals (2 Places) 5.6" (142.9) 0.56" (4.) 4.50" (114.).55" (90.1) 0.50" (2.7).1" (84.2) 1.88" (47.6) 0.218" (5.5) Dia. 0.20" (5.8) Square Hole 0.159" (4) Dia Tap Typ. 4 Places 0.16" (.4) Dia. 8-2 Tap 9575H DPDT Relay with Auxiliary SPDT Switch Mounting Holes (4.75) Dia. (2 Places) 0.218" (5.5) Dia. 2.00" (50.8) 0.6" (9.1).00" (76.2) 8-2 Machine Screw on Contact Terminals (6 Places) 2.25 (58.7) Max. 0.20" (5.1) (47.5) 0.8 (41.1) 2.50 (6.5) (9.5).12 (79.2) Max. 6-2 Machine Screw on Coil Terminals (2 Places) Mounting Holes (2) NC 10A 1/4 hp 125 OR 250 Vac 0.4A at 125 Vdc, 0.2A at 250 Vdc A 125 Vac LAMP 278 VA 125/250 Vac P.D. NO COM AUX. SWITCH MARKING SURFACE Insulators (2 Sides) 4.44 (112.7) Max. RELAY TOP VIEW Screw Terminals (4-40) RHMS with External Tooth Lockwashers ( Places) Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA E February V7-T-119

5 .6 Product Overview Catalog Number Selection D9, D96 and D99 Series Note 1 For D96208ACZ, output voltage is 150 Vdc. D9 = Hockey puck D96 = Compact D99 = DIN rail Contents D A M D 2 Output Voltage 1 = 2 60 Vdc 2 = Vac 1 = 200 Vdc 4 = Vac 6 = Vac Current Output current in amps Contact Configuration A = SPST-NO B = SPST-NC C = DPST-NO D = DPST-NC D9 Series D96 Series D99 Series Output Type C = SCR T = Triac M = MOSFET Input Voltage 1 = Vac 2 = 2 Vdc =.5 2 Vdc 4 = 4 15 Vdc 5 = Vdc Turn On Type Z = Zero cross R = Random D = DC switch Page V7-T-121 V7-T-128 V7-T-1 V7-T-120 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA E February 201