Setup Guide. Quantum Data 70x/80x Series. Video Generators. Rev. 1.1
|
|
|
- Alexander Russell
- 5 years ago
- Views:
Transcription
1 Setup Guide Quantum Data 70x/80x Series Video Generators Rev. 1.1
2 Introduction CalMAN Required Version The Quantum Data 70x and 80x Video Generator test patterns can be automatically controlled by CalMAN Display Calibration Software. The generators provide test patterns for visual performance evaluation, grayscale luminance ramp calibration, color gamut (CMS) calibration, and validation measurements of white, primary, and secondary luminance ramps. These generators do not provide RGB triplet support. These generators cannot provide test patterns for saturation sweeps, ColorChecker patterns, or 3D LUT calibration. Note: The QD 804B controls its window pattern size and the luminance/color of the window, but does not control the background of the window pattern. When you select APL patterns or the Window 4-40 pattern with the 804B, it produces a constant black background instead of the expected background. Version or later Version adds HDR10 support for QD 804 pattern generator (no 804b HDR10 support at this time) CalMAN Recommended Workflows All measurement and calibration workflows except ColorMatch and Color Cube. Quantum Data Generator Required Firmware All firmware versions are acceptable QD 804 requires firmware version or higher to support HDR10 patterns Quantum Data Generator Control Port RS-232 Serial Quantum Data Generator Computer Connection Connect the Quantum Data generator to the computer with a null modem serial cable and, if necessary, a USB to serial converter. 2
3 If a USB to serial converter is used, be sure that the proper USB driver is installed for the converter. If necessary, install the SpectraCal Device Driver Pack from this link: Note: See the following guide on USB to Serial Converters. upguide.pdf 3
4 CalMAN Connection Procedure CalMAN Source Connect 1. On the CalMAN Source Settings tab, click Find Source. 2. On the Find Source dialog (Figure 1), select Quantum Data as the Manufacturer. 3. Select the Model to match your Quantum Data generator. 4. Select the Com Port that is assigned to the connected generator (check this in Windows Device Manager). CalMAN Source Settings Tab Figure 1. CalMAN Find Source dialog, for connecting to the Quantum Data generator as a CalMAN test pattern source. 5. Click Connect on the Find Source dialog. The CalMAN Source Settings tab (Figure 2) provides Source Information and Settings for the connected Quantum Data Video Generator. 4
5 Figure 2. CalMAN Source Settings tab, for selecting generator setup options. Settings Window Size Select the desired test pattern size and type from the Window Size selection box. Note: For Plasma and CRT displays, Constant APL 50 works well. Delay CalMAN provides a default measurement delay time of 2 seconds to accommodate the test pattern settling time of the Quantum Data generator and an attached display. To optimize the delay time for a particular configuration, potentially speeding up all measurement times, click the Optimize button. Specialty Patterns The pattern selection field allows you to manually select patterns from the Quantum Data generator for visual display evaluation (not for automated measurements or calibration). 5
6 About / Contact About Portrait Displays Portrait Displays, Inc., since 1993, is a leading application software provider (ASP) for PC, smartphone, and tablet displays. The Portrait Displays team now includes SpectraCal, the world s leading provider of video display calibration software. The combined companies offer value-added, feature-rich solutions to both OEM display manufacturers and end users seeking improved accuracy and manageability of their displays. Portrait Displays, an Intel Capital Portfolio company, is a private corporation with headquarters in Pleasanton, California, USA with representatives in Europe, Taiwan, China, Japan, and Korea. Contact Us Submit a Technical Support Request: spectracal.com sales@spectracal.com Portrait Displays, Inc Owens Drive Pleasanton, CA USA portrait.com 6
Setup Guide. Murideo SIX-G. Digital Video Generator. Rev. 1.6
Setup Guide Murideo SIX-G Digital Video Generator Rev. 1.6 Introduction The Murideo SIX-G digital video generator can be automatically controlled by the CalMAN Display Calibration Software to produce measurement
Setup Guide. Dolby PRM Rev. 1.1
Setup Guide Dolby PRM-4200 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Dolby PRM-4200 monitor.
Setup Guide. Panasonic VX200/VX300/BT300. Plasma Displays. Rev. 1.1
Setup Guide Panasonic VX200/VX300/BT300 Plasma Displays Rev. 1.1 Panasonic VX200/VX300 (BT300 below) CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VX200/VX300 display s two
Setup Guide. Panasonic BT-4LH310. Rev. 1.1
Setup Guide Panasonic BT-4LH310 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Panasonic 4LH310
Setup Guide. Flanders Scientific BoxIO. Rev. 1.1
Setup Guide Flanders Scientific BoxIO Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the features of the Flanders Scientific BoxIO advanced color management device to calibrate
Setup Guide. AJA Video Systems LUT-box. Rev. 1.2
Setup Guide AJA Video Systems LUT-box Rev. 1.2 Introduction CalMAN Required Version: CalMAN takes advantage of the AJA Video Systems LUT-box features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Konvision monitors. Rev. 1.0
Setup Guide Konvision monitors Rev. 1.0 Introduction CalMAN Display Calibration Software can automatically create multiple optimized calibration 3D LUTs for the entire line of Konvision monitors, with
Setup Guide. Pandora Pluto. Color Management System. Rev. 1.1
Setup Guide Pandora Pluto Color Management System Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Pandora Pluto features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Creating 3D LUTs. CalMAN Overview. Rev. 1.1
Setup Guide Creating 3D LUTs CalMAN Overview Rev. 1.1 Introduction This is an overview guide for using the Intelligent Resolution Profiling (IRP), Lightning LUT, and 3D LUT Retargeting technologies that
Setup Guide. X-Rite i1display. Retail and OEM. Rev. 1.2
Setup Guide X-Rite i1display Retail and OEM Rev. 1.2 Introduction CalMAN supports the X-Rite i1 Display colorimeter (Retail and OEM) for measuring many display types, including CCFL, LED, plasma, and also
Setup Guide. Blackmagic Design HDLink Pro. Rev. 1.1
Setup Guide Blackmagic Design HDLink Pro Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Blackmagic Design HDLink Pro features to calibrate a video display with a 10-bit
Setup Guide. Teradek COLR. Rev. 1.1
Setup Guide Teradek COLR Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the Teradek COLR features to calibrate a video display with a 10-bit 33x33x33 3D cube lookup table (LUT).
Setup Guide. Panasonic. VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1
Setup Guide Panasonic VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1 Introduction CalMAN automatically calibrates the Panasonic VT30/DT30/D30/VT50/WT50 US/NA model display s two point grayscale controls,
Setup Guide. SpectraCal ColorBox. (also eecolor) Image Calibration Processor. Rev. 1.1
Setup Guide SpectraCal ColorBox (also eecolor) Image Calibration Processor Rev. 1.1 Introduction CalMAN takes advantage of the SpectraCal ColorBox (also eecolor) processor features to calibrate a video
Setup Guide. Blackmagic Design Teranex Mini. Rev. 1.3
Setup Guide Blackmagic Design Teranex Mini Rev. 1.3 Introduction CalMAN takes advantage of the internal 3D LUT feature of the Blackmagic Design Teranex Mini to calibrate a video display with a 33x33x33
Setup Guide. Panasonic. VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.
Setup Guide Panasonic VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically
Setup Guide. Panasonic. VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1
Setup Guide Panasonic VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VT30/GT30/DT30/VT50/GT50/WT50/DT50
Setup Guide. AV Foundry VideoForge HDMI. Digital Video Generator. Rev. 1.1
Setup Guide AV Foundry VideoForge HDMI Digital Video Generator Rev. 1.1 Introduction The AV Foundry VideoForge HDMI Digital Video Generator is a versatile, high value test pattern generator with a field-ruggedized
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction This guide designed as a reference to the Sony BRAVIA Workflow, used to calibrate Sony's upper-end Android TVs including Z9D and subsequent LCD and OLED models.
Setup Guide. SpectraCal MobileForge. Pattern Generator App. Rev. 1.6
Setup Guide SpectraCal MobileForge Pattern Generator App Rev. 1.6 Introduction MobileForge is a free pattern generator app for ios, Android, and Fire TV devices. MobileForge generates accurate test patterns
Setup Guide. EIZO Monitors. Rev. 1.4
Setup Guide EIZO Monitors Rev. 1.4 Introduction CalMAN Display Calibration Software can automatically create optimized calibration 1D or 3D LUTs for EIZO monitors equipped with a self-calibration sensor.
Setup Guide. Panasonic AS800/AX800/AX Models. Rev. 1.1
Setup Guide Panasonic AS800/AX800/AX900 2014 Models Rev. 1.1 Introduction CalMAN Recommended Workflows For the Panasonic models listed above, CalMAN automatically calibrates the display s two point grayscale
Setup Guide. SpectraCal C6 HDR2000 Colorimeter. Rev. 1.2
Setup Guide SpectraCal C6 HDR2000 Colorimeter Rev. 1.2 Introduction The SpectraCal C6 HDR2000 Colorimeter is one of the most advanced light measurement devices available, providing the accuracy you need
Setup Guide. CalMAN ColorMatch. Rev. 1.1
Setup Guide CalMAN ColorMatch Rev. 1.1 Introduction Thank you for your interest in using the free version of CalMAN ColorMatch. If you haven t already received your free ColorMatch license, follow this
Setup Guide. Klein K-10CP Colorimeter. Rev. 1.1
Setup Guide Klein K-10CP Colorimeter Rev. 1.1 Introduction Klein K-10CP Included Parts The K-10CP (Cinema Pro) is a reference class non-contact optical colorimeter with superb accuracy, the fastest read
Setup Guide. Color Volume Analysis Workflow. Rev. 1.2
Setup Guide Color Volume Analysis Workflow Rev. 1.2 Introduction Until the introduction of HDR, a video display s color reproduction range was typically represented with a two-dimensional chromaticity
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction CalMAN can guide the calibration of a 2018 LG Super UHD LCD or an 2018 LG OLED TV in HDTV SDR, HDR10, and Dolby Vision modes. This assures the most accurate rendering
Setup Guide. CalMAN Client for SCRATCH. Rev. 1.1
Setup Guide CalMAN Client for SCRATCH Rev. 1.1 Introduction CalMAN Required Software Version: CalMAN Display Calibration Software interfaces directly with ASSIMILATE SCRATCH software through the CalMAN
Setup Guide. Rev. 1.7
Setup Guide By Rev. 1.7 Intrductin The SpectraCal VideFrge PRO test pattern generatr can be autmatically cntrlled by the CalMAN Display Calibratin Sftware t prduce measurement and calibratin test patterns
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide Thank you for purchasing an AV Foundry VideoForge HDMI Digital Video Generator, a versatile, high value test pattern generator with
User Manual. Rev. 1.3
User Manual Rev. 1.3 Table of Contents Introduction 3 Important Safety Information 4 Electrostatic Discharge (ESD) Protection 5 Key Features 6 What's in the Box 7 Control & Indicator Functions 8 HDMI System
So, how do I create LUTs for each one of the buttons on the remote?
Advanced Use of Prisma There are several papers and articles on LUTs and calibration that you can find on the Murideo web site. We'll start the discussion here by saying if you choose to optimize and maximize
Using LightSpace CMS for User Created Calibration LUTs
20140130 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com 1. If
Calibration Using i1 probe with CalMan and Resolve
20160526 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com Please
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays
Achieve Accurate Critical Display Performance With Professional and Consumer Level Displays Display Accuracy to Industry Standards Reference quality monitors are able to very accurately reproduce video,
What is the history and background of the auto cal feature?
What is the history and background of the auto cal feature? With the launch of our 2016 OLED products, we started receiving requests from professional content creators who were buying our OLED TVs for
Calibration Best Practices
Calibration Best Practices for Manufacturers By Tom Schulte SpectraCal, Inc. 17544 Midvale Avenue N., Suite 100 Shoreline, WA 98133 (206) 420-7514 info@spectracal.com http://studio.spectracal.com Calibration
Achieve Accurate Color-Critical Performance With Affordable Monitors
Achieve Accurate Color-Critical Performance With Affordable Monitors Image Rendering Accuracy to Industry Standards Reference quality monitors are able to very accurately render video, film, and graphics
Palette Master Color Management Software
Palette Master Color Management Software How to Use Guide 01 Proprietary Calibration Software Co-developed with leading color calibration experts X-Rite, Palette Master software simplifies calibration
More Skills 14 Watch TV in Windows Media Center
M05_TOWN5764_01_SE_SM5.QXD 11/24/10 1:08 PM Page 1 Chapter 5 Windows 7 More Skills 14 Watch TV in Windows Media Center You can watch and record broadcast TV in Windows Media Center. To watch and record
GWL/ Power Group Technology Solutions Stay Powered for the Future
GWL/ Power Group Technology Solutions Stay Powered for the Future BMS2405 CONNECTION GUIDE: This is simple step-by-step manual how to CONNECT AND proceed basic SETUP of BMS2405. In following example connection
FSI Calibration Guide Using I1 / LightSpace / Resolve
FSI Calibration Guide Using I1 / LightSpace / Resolve Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
TALOS ITR-T250. TALOS ITR-T250 Driver Setup Guide (V1.0) on the disk sent with the printer. Follow the steps (see the picture):
TALOS ITR-T250 Driver Setup Guide (V1.0) Run the on the disk sent with the printer. Follow the steps (see the picture): Then click Next (see the following picture). 1 Choose I accept the agreement, (see
3G-SDI to HDMI Scaler Installation Guide
Introduction 3G-SDI to HDMI Scaler Installation Guide The 3G-SDI to HDMI Scaler allows you to broadcast 3G-SDI signals from one source to two 3G-SDI and one HDMI outputs. Key Features and Benefits Converts
SXGA096 DESIGN REFERENCE BOARD
SXGA096 DESIGN REFERENCE BOARD For Use with all emagin SXGA096 OLED Microdisplays USER S MANUAL VERSION 1.0 TABLE OF CONTENTS D01-501152-01 SXGA096 Design Reference Board User s Manual i 1. INTRODUCTION...
FSI Calibration Guide Using CR100 / LightSpace / BoxIO
FSI Calibration Guide Using CR100 / LightSpace / BoxIO Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
Yellow Frog. Manual Version 1.1
Yellow Frog Manual Version 1.1 1 YellowFrog Contents PC Requirements...... 2 YellowFrog Power Meter Measurement.... 3 YellowFrog PC Software..... 3 Main Screen....... 4 Input Overload....... 5 Battery
RF Solution for LED Display Screen
RF Solution for LED Display Screen Introduction RF is a kind of wireless telecommunication technology, now standard IEEE802.11B is much popular. Communication speed between server and terminal can reach
Agilent Understanding the Agilent 34405A DMM Operation Application Note
Agilent Understanding the Agilent 34405A DMM Operation Application Note Introduction Digital multimeter (DMM) is a basic device in the electrical world and its functions are usually not fully utilized.
Instruction Manual. 1 Page
Instruction Manual 1 Page Introduction A reference pattern generator is an essential piece of equipment in the video calibration process. Most, if not all, certified and experienced calibrators utilize
HDMI to 3G-SDI Scaler Installation Guide
Introduction HDMI to 3G-SDI Scaler Installation Guide The HDMI to 3G-SDI Scaler allows you to broadcast HDMI signals from one source to two 3G-SDI outputs. Key Features and Benefits Convert HDMI signals
USER MANUAL. 840Hxl Pattern Generator MODEL: P/N: Rev 7
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: 840Hxl Pattern Generator P/N: 2900-300032 Rev 7 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 2
HD/SD-SDI TO VGA CONVERTER. DAC-60 Quick Start Guide.
HD/SD-SDI TO VGA CONVERTER DAC-60 Quick Start Guide www.datavideo.com Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase.
User Manual January,
User Manual January, 2018 1 2 Table of Contents CHAPTER 1: THE BASICS... 6 What to Expect from Calibration... 6 What Do I Need?... 6 Calibration Procedures... 7 Essential Equipment... 7 Basic Principles...
USER MANUAL. 840Hxl Pattern Generator MODEL: P/N: Rev 5
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: 840Hxl Pattern Generator P/N: 2900-300032 Rev 5 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 2
In-situ Port Cal for Dual Carriages Tuner
In-situ Port Cal for Dual Carriages Tuner In-Situ port cal method is the calibration technique mainly for cascaded tuners or multi-carriage tuner. Unlike in-situ system cal which requires 2 VNA calibrations
PLASMA MONITOR (PT20 UVVis) USER GUIDE
Thin Film Measurement solution Software, sensors, custom development and integration PLASMA MONITOR (PT20 UVVis) USER GUIDE August 2012 Plasma monitor with VFT probe. INTRODUCTION Plasma Monitor includes
Interface sheet - Edan ST-1212 Stress - CPET ergometer
Interface sheet - Edan ST-1212 Stress - CPET ergometer Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
Ydea-C5 System. Automatic Brightness Adjustment_DMX User Manual
Ydea-C5 System Automatic Brightness Adjustment_DMX User Manual Automatic Brightness Adjustment_DMX includes 3 modes: timing adjustment, light sensation adjustment, and brightness priority; 1 Timing adjustment:
Connecting To and Programming the LPC2148 Blue Board. Method 1 ISP (In-System Programming) w/ Flash Magic
Connecting To and Programming the LPC2148 Blue Board We have two primary methods of programming the LPC2148 Blue Board. We can use the supplied bootloader with ISP (In-System Programming) or JTAG (better
R4 AIS Class B Transponder
Saab TransponderTech R4 AIS Class B Transponder Configuration Manual GENERAL Page 1 i Copyright The entire contents of this manual and its appendices, including any future updates and modifications, shall
High Power Bundle for the Icom IC-7300
High Power Bundle for the Icom IC-7300 The Icom IC-7300can be connected to the KAT/KPA500 combo using the Key signal available on the rear panel of the rig. You would configure the appropriate TX port
Instruction for Locking Tuner s Carriage(s) before Shipping
Instruction for Locking Tuner s Carriage(s) before Shipping Step 1. Configure tuner properties and verify connection From ATS block diagram view, double click on the tuner that needs to be locked. The
HD/SD-SDI TO VGA CONVERTER. DAC-60 Quick Start Guide.
HD/SD-SDI TO VGA CONVERTER DAC-60 Quick Start Guide www.datavideo.com Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase.
Auxiliary states devices
22 Auxiliary states devices When sampling using multiple frame states, Signal can control external devices such as stimulators in addition to switching the 1401 outputs. This is achieved by using auxiliary
Cable Calibration Function for the 2400B/C and 2500A/B Series Microwave Signal Generators. Technical Brief
Cable Calibration Function for the 2400B/C and 2500A/B Series Microwave Signal Generators Technical Brief Quickly and easily apply a level correction table to compensate for external losses or power variations
Table of Contents CHAPTER 1: INTRODUCTION: THE BASICS...6
User Manual August, 2018 1 2 Table of Contents CHAPTER 1: INTRODUCTION: THE BASICS...6 WHAT TO EXPECT FROM CALIBRATION... 7 WHAT DO I NEED?... 8 CALIBRATION PROCEDURES... 9 Essential Equipment... 9 Basic
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above Things to check before tuner characterization Make sure tuner is power up and USB cable is connected to the computer
Interface sheet - Korr Cardio Coach Monitor - CPET Ergometer
Interface sheet - Korr Cardio Coach Monitor - CPET Ergometer Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
Mortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes
Mortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes To setup Tango M2 with the XScribe cardiac stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables
REMOTE I/O R30 SERIES. PC CONFIGURATOR SOFTWARE Model: R30CFG Ver Users Manual
REMOTE I/O R30 SERIES PC CONFIGURATOR SOFTWARE Model: R30CFG Ver. 1.13 Users Manual 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN Tel: +81-6-6659-8201 Fax: +81-6-6659-8510 http://www.m-system.co.jp/
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Contents 1) Grid-Tie Installation Block Diagram... 3 2) Installation Steps.... 4 2.1) Initial Setup.... 4 2.1.1)
ASKING FOR ASSISTANCE
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday PST. Write To: Gefen Inc. c/o Customer
Interface sheet - Nihon Kohden 1550K - CPET Treadmill
Interface sheet - Nihon Kohden 1550K - CPET Treadmill Service documentation Lode BV Zernikepark 16 NL 9747 AN Groningen The Netherlands t: +31 50 571 28 11 f: +31 50 571 67 46 @: ask@lode.nl www.lode.nl
Agilent CSA Spectrum Analyzer N1996A
Agilent CSA Spectrum Analyzer N1996A Demonstration Guide Introduction This step-by-step demo guide will help you explore the unprecedented value of the Agilent CSA spectrum analyzer for meeting your design,
Kaleidescape Co-Star for Lumagen
Kaleidescape Co-Star for Lumagen Installation Guide The Co-Star solution allows a Strato movie player to present a unified onscreen library that includes all of a Kaleidescape customer s movies from DVD
HITS QT/QT+ Setup Instructions for QSD/QHD Services using: Drake SCT2x4 Headend Transcoder 2 Satellites/4 Multiplexes
HITS QT/QT+ Setup Instructions for QSD/QHD Services using: Drake SCT2x4 Headend Transcoder 2 Satellites/4 Multiplexes Drake Transcoder Front /Rear View Setup and Programming Instructions: Input Setup Below
Portland Trail Blazers: CalMAN Display Calibration Case Study
The Moda Center, in downtown Portland, is home court for the Portland Trail Blazers By Tom Schulte Portland Trail Blazers: CalMAN Display Calibration Case Study Provided By SpectraCal, Inc. October 2016
SpectraCal C6-HDR Technical Paper
SpectraCal C6-HDR Technical Paper High Luminance Colorimeter By Tom Schulte and Darrell Bird Technical Paper SPECTRACAL C6 HDR HIGH LUMINANCE COLORIMETER By Tom Schulte and Darrell Bird High Dynamic Range
TransitHound Cellphone Detector User Manual Version 1.3
TransitHound Cellphone Detector User Manual Version 1.3 RF3 RF2 Table of Contents Introduction...3 PC Requirements...3 Unit Description...3 Electrical Interfaces...4 Interface Cable...5 USB to Serial Interface
Installer Guide. Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor.
Installer Guide Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor. For more information, see the manuals that came with these products. Setting Up the
Mortara X-Scribe Tango+ Interface Notes
Mortara X-Scribe Tango+ Interface Notes To setup Tango+ with the X-Scribe stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
OptoFidelity Video Multimeter User Manual Version 2017Q1.0
OptoFidelity Video Multimeter User Manual Version 2017Q1.0 OptoFidelity Oy sales@optofidelity.com www.optofidelity.com OptoFidelity 2017 Microsoft and Excel are either registered trademarks or trademarks
RDS: The RDS, or Radio Data System, is supported in the g! interface where available.
Manufacturer: Integra Integration Note Model Number(s): Integra 20.3/30.3/40.3/50.3/70.3/80.3 Core Module Version: 5.4 Comments: FW 1.09 (1091-0999-0210-9105) Document Revision Date: 1/15/2013 OVERVIEW
1 Synchronising Xsens with the Delsys Trigno EMG System
1 Synchronising Xsens with the Delsys Trigno EMG System The steps described below show how to configure Xsens systems to control start and stop of a recording of the Delsys Trigno EMG system, and how to
$99 $199 $299 $399 $199 $295 $695 $1,595 $1,495 $2,495 $2,995
Main Features Home Epress Basic Epress Lite Epert $99 $199 $299 $399 $199 $295 $695 $1,595 $1,495 $2,495 $2,995 Color Temperature Colorspace Measurement 2 Point Grayscale Multi-Point Grayscale Color Management
Quick Guide Book of Sending and receiving card
Quick Guide Book of Sending and receiving card ----take K10 card for example 1 Hardware connection diagram Here take one module (32x16 pixels), 1 piece of K10 card, HUB75 for example, please refer to the
User s Guide. Version
User s Guide Version 1.3.70 Software Updates Occasionally, updates and enhancements to the MultiProfiler software will be made available. Visit the MultiProfiler section of the NEC DISPLAY SOLUTIONS website
MX194. Your advantages. 1MP Medical-Display
MX194 Your advantages The 19-inch MX194 with a traditional 5:4 aspect ratio stands out thanks to its factory-preset DICOM characteristic curve, which guarantees faithful reproduction of radiological images
Transmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
Install and Set Up G550 Hardware
Install and Set Up G550 Hardware 7/22/2014 Edition: A Publication Information 2014 Imagine Communications. Proprietary and Confidential. Imagine Communications considers this document and its contents
Extra long-range RFID (proximity) card reader
GP90A Extra long-range RFID (proximity) card reader (1) Features: Extra long reading range of up to 90 cm with ISO-size passive RFID cards*, over 100 cm with special optimized passive cards High-precision
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Model 9110 Portable Airborne Particle Counter (particle counter). This guide will help you
AVIA Professional A multi-disc calibration, set-up and test suite Developed by: Ovation Multimedia, Inc. July, 2003
AVIA Professional A multi-disc calibration, set-up and test suite Developed by: Ovation Multimedia, Inc. July, 2003 AVIA Professional General Information What is AVIA Professional? AVIA Professional (AVIA
User Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor
Touch Display LCD Monitor User Manual Installation Guide 15 Resistive Touch LCD Monitor MODEL: KK1500-TR i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com User
Lite USER GUIDE. 3 Lite. For more information visit
USER GUIDE Lite 3 Lite For more information visit www.caldigit.com Table of Contents Section 1 : General Information Introduction 3 General Use Warnings 3 Safety Warnings 3 System Requirements 4 In the
Overview. Shipped in the Venue Vizion Package: Simplified Integration Process. Installation consists of 6 easy steps:
Overview Shipped in the Venue Vizion Package: Four two-channel QMOD Encoder-Modulators Each unit can accept up to 2 inputs, providing up to 8 channels in the system. One ICE-HE-DXL Display Control Center
World s smallest 5MP stand-alone vision system. Powerful Cognex vision tool library including new PatMax RedLine and JavaScript support
In-Sight 8405 Vision System The high-performance In-Sight 8405 is an ultra-compact 5 megapixel (MP) vision system that delivers high-performance vision tools, faster communication speeds, and high resolution
4x1 VGA & Audio Switch with IR
Introduction 4x1 VGA & Audio Switch with IR Installation Guide The 4x1 VGA & Audio Switch with IR allows you to switch between four computers to share a VGA monitor and a set of speakers. Features and
Portable VGA & USB Audio to HDMI Converter Installation Guide
Introduction Portable VGA & USB Audio to HDMI Converter Installation Guide The Portable VGA & USB Audio to HDMI Converter connects your VGA-equipped computer to an HDMI display, projector or home theater