DIN Power Module - Phase Adaptive
|
|
- Ezra Chambers
- 5 years ago
- Views:
Transcription
1 DIN Power Module ow Capacity Phase Adaptive DIN Power Module - Phase Adaptive a The Phase Adaptive Power Module family is a group of modular products for the control of lighting loads. This product is compatible with utron guestroom systems only. IEC SEV / 132 ma Features eading-edge or trailing-edge dimming for incandescent / halogen, electronic / magnetic low voltage, and neon / cold cathode light sources. Controls dimmable CF / ED loads. Refer to for compatibility with dimmable CF / ED light sources. RTISS Equipped technology compensates for incoming line-voltage variations (up to ± 2% change in frequency / second) such as changes in Root Mean Square (RMS) voltage, frequency shifts, harmonics and line noise. Integral protection for common temporary overcurrent and over-voltage conditions. SS7 Compliant Includes QS link for seamless integration of lights, motorized window treatments ( Plus only), and control stations. Provides 4 Power Draw Units (PDUs) to power QS devices on the QS link. EDs on the module provide diagnostic information. Buttons on module provide load override control. Power failure memory V~ 50 / 60 Hz 4 A (shown) V~ 1 A D1 D2 D3 D4 Models Available : V~, 1 A per output, 4 outputs MQSE-3A1-D: V~, 1 A per output, 3 outputs MQSE-2A1-D: V~, 1 A per output, 2 outputs Specification Submittal Page
2 Assembled in U.S.A Rev. A 243C IND. CONT. EQ. IEC PEV /NEC Class (0) DIN Power Module ow Capacity Phase Adaptive System Example - Prime Room Thermostat (R-HVAC-230-S) or 3rd Party Thermostat a CCO 3rd Party Magnetic Door Switch CCI GCU-HOSP (for setup only) Guestroom Control Unit GCU-HOSP Switching Power Module MQSE-4S1-D V~ 50 / 60 Hz 4 A CCI CCI CCO N.O. CCO N.C. CCO 24 V IEC PEV / 132 ma V~ 1 A M V~ 1 AX, 1 FA / 6 RA 4,4 in-lb Cu Al 65 / 75 C 0,5 N m Dimming Power Module QS ink 24 V IEC PEV / 132 ma QS Power Supply (optional) To additional QS devices V~ 50 / 60 Hz 4 A 4,4 in-lb Cu Al 65 / 75 C 0,5 N m V~ 1 A D1 D2 D3 D4 QS Sensor Module (QSM) Wireless Communication Radio Powr SavrTM Occupancy Sensor (up to 10 per QSM) Pico Wireless Controller (up to 10 per QSM) Multiple QS Sensor Modules can be added to increase the number of wireless inputs and Pico wireless controllers. Specification Submittal Page
3 Assembled in U.S.A Rev. A C IND. CONT. EQ. IEC PEV/NEC Class 2 65 / 75 C (0) ,4 in-lb 0,5 N m IEC PEV / 132 ma 1 D1 2 D2 3 D3 4 D4 DIN Power Module ow Capacity Phase Adaptive System Example - Plus a Guestroom Control Unit Property Management System (PMS) Guestroom Control Unit GCU-HOSP Hotel Network utron Property Management System (PMS) Interface Software Building Management System (BMS) QS Power Supply (optional) Room Thermostat (R-HVAC-230-S) V~ 50 / 60 Hz 4 A Cu Al 24 V V~ 1 A Dimming Power Module QS Wallstation QS Wallstation QS Sensor Module (QSM) Wireless Communication PalladiomTM Thermostat Radio Powr SavrTM Occupancy Sensor (up to 10 per QSM) Pico Wireless Controller (up to 10 per QSM) Multiple QS Sensor Modules can be added to increase the number of wireless inputs and Pico wireless controllers. To additional QS devices SivoiaR QS Motorized Shades Corridor I/O Specification Submittal Page Alena QS Motorized Drapery Door Chime Door Switch Contact Window Switch Contact
4 DIN Power Module ow Capacity Phase Adaptive Specifications Regulatory Approvals Complies with IEC/EN Complies with U 508 Complies with CSA C22.2, #14 Complies with NOM 003 utron Quality Systems registered to ISO Power V~ 50/60 Hz Single input feed 4 A maximum input current ightning strike protection meets ANSI/IEEE standard C62.41 and IEC Can withstand voltage surges of up to V~ and current surges of up to A. Standby power: <2 W (wired devices on QS link excluded) Provides 4 PDUs to power QS devices on QS link ESD protection exceeds agency requirements per IEC QS ink output: a Environment For thermal specifications, see Mounting section Relative humidity: less than 90% non-condensing For indoor use only Terminals Mains wiring: 1.0 mm² to 2.5 mm² (18 AWG to 12 AWG) (single wire, solid or stranded) Zone wiring: 1.0 mm² to 2.5 mm² (18 AWG to 12 AWG) (single wire, solid or stranded) QS ink: 0.5 mm² to 2.5 mm² (22 AWG to 12 AWG) (single wire, solid or stranded) Manual Mode Operation By default each zone is set to Auto Detect load type. Zone buttons on the unit can be used to: turn loads on and off. dim loads up and down. Specification Submittal Page
5 DIN Power Module ow Capacity Phase Adaptive Specifications (continued) Output Zone Ratings No Derating is required if all the conditions below are met: Calibration point maximum is 70 ºC Room ambient temperature is between 0 ºC and 40 ºC (32 ºF and 104 ºF). Panel ambient temperature, within 20 mm (0.80 in) of unit, is between 0 ºC and 50 ºC (32 ºF and 122 ºF). Each zone has a 5 W incandescent minimum load requirement. For ED compatibility details, see Automatically selects leading-edge or trailing-edge dimming when configured to "Auto-detect". It can also be configured for a specific load type. Does not support non-dimming loads One load type per zone. Output should not be used to control general purpose receptacles. Intended for lighting loads only. Output must be directly connected to the load, outputs are not compatible with load side switching (i.e., breakers, switches, etc.). Each zone is rated for the following wattage and load types A : oad Type Zones V~ 220 V~ 230 V~ 240 V~ Incandescent / Halogen 120 W 220 W 230 W 240 W Electronic ow Voltage 120 W 220 W 230 W 240 W Magnetic ow Voltage B Neon / Cold Cathode B 120 VA (90 W C ) 120 VA (90 W C ) 220 VA (165 W C ) 220 VA (165 W C ) 230 VA (172 W C ) 230 VA (172 W C ) 240 VA (180 W C ) 240 VA (180 W C ) A Refer to www. for compatibility with dimmable CF / ED light sources. B Only use iron core transformers intended for use with an electronic switch or dimmer per Clause 8.3 of IEC / EN C Actual lamp wattage a Run a separate neutral for each load circuit. A common neutral connection is not recommended. Unit may be powered by Ground Fault Interrupter (GFI) or Residual Current Circuit Breaker with Overload (RCBO) protected circuit if required. oad circuit wiring (from breaker to unit to load) must be run in its own non-metallic conduit, or nuisance tripping may occur. For applications requiring 0 10 V- control, use 10 V- Interface (GRX-TVI). For applications requiring higher wattage ratings, use a power booster (NGRX-PB, NGRX-EVI for 230 V~ or PHPM-PA for 120 V~). Maximum wire length between Phase Adaptive Power Module and the load must be less than 30.5 m (100 ft). Specification Submittal Page
6 DIN Power Module ow Capacity Phase Adaptive Mechanical Dimensions a V~ 50 / 60 Hz 4 A IEC SEV / 132 ma V~ 1 A 89.7 mm (3.53 in) 60.6 mm (2.38 in) D1 D2 D3 D mm (6.37 in) Mounting Mount in IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail. For United States and Canada, use NEMA Type 1 minimum rated enclosure. Unit is 9 DIN modules (161.7 mm [6.37 in]) wide. Mount in an accessible and serviceable location. Unit may be mounted by pressing the unit onto the DIN rail with the clips locked. To remove the unit from the DIN rail, unlock the clips using a screwdriver. See utron P / N at www. for more information on mounting and installation in panels with integrated DIN rail. Mount the Power Module where audible noise is acceptable (internal relay click) Unit generates heat, maximum 35 BTUs/Hour. Mount unit such that all the conditions below are met: Room ambient temperature is between 0 ºC and 40 ºC (32 ºF and 104 ºF). Temperature inside mounting panel, within 20 mm (0.80 in) of unit, is between 0 ºC and 50 ºC (32 ºF and 122 ºF). Calibration point maximum: 70 ºC (158 ºF). Prog. Prog. Zn. 1 Zn. Zn Zn. Zn Zn. Zn Zn. Zn V~ V~ / Hz / 60 / 60 4 Hz A Hz 4 4 A A IEC SEV IEC IEC / SEV / / NECR Class NECR 2 Class ma V ma ma V~ V~ A V~ 1 1 A A N N N N N NN NN N N N ND1 D2 D1 D3 D1 D2 D4 D2 D3 D3 D4 D4 Mounting clips (4) on unit ocked Unlocked Specification Submittal Page
7 DIN Power Module ow Capacity Phase Adaptive Wiring: Mains and Output Zones a Wiring from Distribution to Phase Adaptive Power Module Turn off all circuit breakers or isolators feeding the Phase Adaptive Power Module at the distribution panel. Run line / hot and neutral wires from a V~ 50 / 60 Hz feed to the Phase Adaptive Power Module unit. Run a separate neutral for each load circuit. A common neutral connection is not recommended. Mains Wiring and IEC PEV / NEC Class 2 Separation Follow appropriate local and national codes to avoid violating required separation guidelines. IEC SEV / 132 ma V~ 50 / 60 Hz 4 A 2 Zn. 3 Zn V~ 1 A D1 D2 D3 D4 IEC SEV / 132 ma D 50 / 60 Hz 4 A Mains Neutral Outputs V~ 1 A V N N N N D1 D2 D3 D4 D1 D2 D3 D4 Distribution Panel V~ Hot/ine Neutral To additional modules Note: If feeding through utron modules using mains terminals, total current must be less than or equal to 15 A. Zone 1 Zone 2 Zone 3 Zone 4 Specification Submittal Page
8 DIN Power Module ow Capacity Phase Adaptive Wiring: QS ink IEC PEV/NEC Class 2 QS ink Wiring ink communicates using IEC PEV/NEC Class 2 wiring. Follow all applicable national and local codes for proper circuit separation and protection. Turn off all breakers or isolators feeding the Phase Adaptive Power Module before servicing. Wiring may be t-tapped or daisy-chained. Total length of QS link must not exceed 610 m (2 000 ft). For the utron All-In-One cable specification, see utron P / N or on Control power link (, ) wiring: For lengths under 150 m (500 ft), use 1.0 mm 2 (18 AWG) conductors. 120 For lengths over 150 m (500 ft), use 4.0 mm V~ 50 / 60 Hz 4 A (12 AWG) conductors. Data link (, ) wiring: Use one, twisted-shielded pair of 1.0 mm 2. Alternate data-only cable: use approved data link cable (0.5 mm 2 [22 AWG] twisted, shielded) from Prog. Zn. 1 Zn. 2 Zn. 3 Zn. 4 Belden, model #9461. Each QS link IEC PEV/NEC Class 2 terminal will accept up to two 1.0 mm V~ 50 / 60 Hz 4 A (18 AWG) wires; two mm 2 (12 AWG) wires will not fit. If using two 4.0 mm 2 (12 AWG) wires, connect using appropriate wire connectors. Note: For more information on PDUs, refer to Power Draw Units on the QS ink document (utron P/N ). Control ink Data ink 1: 2: 3: 4: IEC SEV / 132 ma a V~ 1 A D1 D2 D3 D4 IEC SE NECR Specification Submittal Page
Switching Power Module
Assembled in U.S.A. 5005757 Rev. A GCU-HOSP 243C ID. COT. EQ. IEC PEV /EC Class 2 +.800.523.9466 + 44.(0)20.7680.448 HomeWorks DI Power odule Switching Power odule The Switching Power odule family is a
More informationQSNE-4S5-230-D V~ 50 / 60 Hz 16 A. Dimming Power Module CCI. Option Def. Input. H Opt1. Hi Temp Prog Power
800 W ax 500 W ax 500 W ax 500 W ax Zone 1 Zone 2 Zone 3 Zone 4 Option Def H Opt1 Opt2 Opt3 230 V~ 50 / 60 Hz 10 A www. H H G G Switching Power odule The DI Power odule (DP) family is a group of modular
More informationPowPak Dimming Module with 0 10 V- Control
PowPak Dimming Module with 0 10 V- Control The PowPak Dimming Module with 0 10 V- Control is a radio frequency (RF) control that operates 0 10 V- controlled fluorescent ballasts or LED drivers based on
More informationPowPak Dimming Module with 0 10 V Control
PowPak Dimming Module with 0 10 V Control The PowPak Dimming Module with 0 10 V Control is a radio frequency (RF) control that operates 0 10 V controlled fluorescent ballasts or LED drivers based on input
More informationCaseta Wireless 3-Way/Single-Pole RF Dimmer For Led, Elv, MLV, or Halogen Lights In White
3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 PD5NEW Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features actuator Rocker switch amperage
More informationControl Unit. Installation and Operation Guide. Please Read
Control Unit Please Read Installation and Operation Guide The GRAFIK Eye QS control unit allows for control of both lights and window treatments, without interfaces, using a single control unit. Features
More informationDALI with KNX Control Unit
DALI with KNX Control Unit Please Read Installation and Operation Guide The GRAFIK Eye QS DALI with KNX control unit allows for direct control of both lights and window treatments from both QS and KNX
More informationINSTALLATION & USER GUIDE
INSTALLATION & USER GUIDE Digidim 458 8-Channel Dimmer STEP 1 Assemble Dimmer Unit STEP 2 Mount Dimmer Chassis STEP 3 Electrical Installation STEP 4 Attach Module and Make Connections STEP 5 Replace Cover
More informationDIN-1DIMU4. DIN Rail Universal Dimmer, 1 feed, 4 channels
The is a 4-channel universal lighting control module designed to support dimming of both forward and reverse phase type loads. A single model supports both 120 and 220-240 Volt electronic and magnetic
More informationMaestro Wireless Dimmers and Switches
Maestro Wireless Dimmers and Switches The Maestro Wireless solution incpates Maestro Wireless load controls, wireless senss, and wireless remote controls, which provide a system that delivers energy savings,
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More informationControl Unit. Installation and Operation Guide. Please Read
Control Unit Please Read Installation and Operation Guide The GRAFIK Eye QS control unit allows for control of both lights and shades, without interfaces, using a single control unit. Features include
More informationMRF2600MLA 600W 120V RF Wireless Dimmer LT Almond
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 MRF2600MLA 600W 120V RF Wireless Dimmer LT Almond Lutron Catalog Number Manufacturer Description Weight per unit Product
More informationSeries CT7N Bimetallic Overload Relays
Series CT7N imetallic Overload Relays Choose CT7N overloads in DC applications and when monitoring Variable Frequency Drives Sprecher + Schuh has always paid particular attention to the subject of motor
More informationIP Roombox. Hotel Room Management
Hotel Room Management Hotel solutions Versatile room management system You need a simple solution which allows you to control all the hotel room electrical applications? Hager offers you a unique combination
More informationwith EcoSystem Please Read
with EcoSystem Please ead Installation and Operation Guide The GAFIK Eye QS with EcoSystem control unit allows for control of both lights and shades, without interfaces, using a single control unit. Features
More informationwith EcoSystem Control Unit Installation and Operation Guide Please Read
with EcoSystem Control Unit Please Read Installation and Operation Guide The GRAFIK Eye QS with EcoSystem control unit allows for control of both lights and shades, without interfaces, using a single control
More information120 V~ Feed-Through DIN Panels (and Accessories)
The Lutron family of DIN rail panels are designed to accept Lutron DIN power modules (DPMs). The compatible DPMs can be configured in the panel to control multiple load types to fit the size, lighting
More informationBulletin 190 IEC Modular Starter System
Bulletin 90 Table of Contents Selection Guide Description Page Bulletin 90....................................... Accessories....................................... 7 Specifications.....................................
More informationDimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control
Kitchen light control Bedroom light control 15 SЕRES iving room light control ighting control in corridors (for hotels, offices and hospitals) FDER reserves the right to alter characteristics at any time
More information15 Series - Dimmer
Features Master slave system for multiple load dimming Suitable for incandescent and halogen lighting loads (with or without transformer or electronic supply) Compatible with energy saving (CF or ED) dimmable
More informationHigh performance circuit breakers
Series High performance Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific trip characteristics
More informationLED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
More informationLocation. Electrical. Loads. 2-wire mains-rated, 0.5 mm² to 1.5 mm² Max. length: 300 m (with 1.5 mm² cable). Example: Belden 8471.
Product Description Installation and User Guide Transistor Dimmer (454) The DIN rail mounted 454 is a fourchannel transistor dimmer that can operate in one of two modes: leading edge or trailing edge.
More informationDescription Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100
DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective
More informationLighting Zone Controller. Specifications
Lighting Zone ler Lighting Zone ler dmw-lzc1-1 02.22.06 The lighting zone controller (LZC) intelligently manages lighting loads to minimize consumption based on input from wall controls, occupant sensors,
More informationNova T* Controls. Nova T*
Nova T* s This series of classic thin-profile linear-slide dimmers and switches offers the following standard features: Square Law Dimming Voltage compensation (not applicable to NTCL-250) Power-failure
More informationProtective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A
Deliveryprogramme Circuitbreak.3pselect.protection Partno. Articleno. 265777 NZMH4-VE1600 Product range Circuit-breaker Protective function Systems, cable, selectivity and generator protection Standard/Approval
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
More informationCyclo Series. user manual. MartinArchitectural
Cyclo Series user manual MartinArchitectural Measurements are in millimeters 63 Cyclo 02 88 Cyclo 03 1000 81 1190 88 Cyclo 04 98 88 2002 Martin Professional A/S, Denmark. All rights reserved. No part of
More informationRadioRA 2 Enhancement and Interface, 120V main repeater with MHz to MHz or MHz to MHz
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 RRAINREPWH RR2 ain Repeater Lutron Catalog Number anufacturer Description Weight per unit Product Category RRAINREPWH Lutron
More informationLED MODULES READYLINE DL
LED MODULES READYLINE DL BUILT-IN MODULE LED-MODULE READYLINE DOWNLIGHT DL WU-M-538 / WU-M-539 / WU-M-540 Typical Applications Downlights Replacement for CFL DIRECT MAINS CONNECTION REDUCED FLICKER HIGH
More informationPBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
More informationIK10 IP68. Specifications. White (4 300 K typical) Warm white (3 000 K typical) Blue (470 nm) Other colors by request
1300 Industrial Road, Unit #19 San Carlos, CA 94070 FREE CALL 1-866-695-5862 US & Canada info@lumascape.com LS553LED Via Ingrade IP68 IK10 The LS553LED is a rugged, side emitting marker light constructed
More informationProtective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A
DATASHEET - NZMN3-VE630 Circuit-breaker, 3p, 630A Part no. NZMN3-VE630 Catalog No. 259133 EL-Nummer (Norway) 0004358791 Similar to illustration Delivery program Product range Circuit-breaker Protective
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationDescription Set value in neutral conductor is synchronous with set value Ir of main pole. CSA 100. conductor. I r A 50-63
Circuit-breaker,4p,63A Partno. NZMH1-4-A63 Articleno. 284426 Similar to illustration Deliveryprogram Product range Circuit-breaker Protective function System and cable protection Standard/Approval IEC
More informationChurch Layout Medium Advanced
Specifier Product Information Church Layout Medium Advanced System Summary This summary is intended to explain, in general terms, some of the possible uses and reasons for having the recommended equipment
More informationSceneStyle2 User Guide
SceneStyle2 User Guide Mode Lighting (UK) Limited. The Maltings, 63 High Street, Ware, Hertfordshire, SG12 9AD, UNITED KINGDOM. Telephone: +44 (0) 1920 462121 Facsimile: +44 (0) 1920 466881 e-mail: website:
More informationSoft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit
DATASHEET - S811+N66N3S Delivery program Soft starter, 66 A, 200-600 V AC, Us= 24 V DC, with control unit, Frame size N Part no. S811+N66N3S Catalog No. 168978 Eaton Catalog No. S811PLUSN66N3S EL-Nummer
More information4 Wiring Brochure Wiring and installation of specific control
- Wiring Brochure tekmarnet 4 User Switch 480 W 480 09/09 1 Information Brochure Choose controls to match application 2 Application Brochure Design your mechanical applications 3 Rough In Wiring Rough-in
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMC1-A160 Circuit-breaker, 3p, 160A Part no. NZMC1-A160 Catalog No. 283296 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
More informationAspect 2 Circuit Digital Scene Control
Aspect 2 Circuit Digital Scene Control S p e c i f i c a t i o n 2 circuits of trailing edge dimming 500W total between the two circuits Both circuits feature independent overload, short-circuit and open-circuit
More informationLED Driver Linear / area dimming industry. Driver LC 200W 1050mA UNV ADV IND ADVANCED series
Driver LC 200W 1050mA UNV ADV IND ADVANCED series Product description Independent constant current LED Driver For dry, damp and wet locations Max. output power 200 W Up to 93.7 % efficiency For luminaires
More informationwith handle LIMOGES Cedex 1. DESCRIPTION - USE 3. DIMENSIONS Symbol: Technology: Use:. For controlling a load remotely via a switch 2.
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 25A power contactors silent CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Dimensions... 1 4. Positioning - Connection...
More informationAS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
More informationModular pulse operated latching relay 16 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Modular pulse operated latc / 05 / 07 / 08 / 10 / 11 / 12 / 14 / 16 / 20 and 927 00 / 49 CONTENTS PAGES 1. Description,
More informationLED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
More informationPHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
More informationSpecial Order To order, add color/finish suffix code to model number. Example: NT-600-BB Metal Finishes. Special Metal Finishes
Wallbox s Nova T* s This series of classic thin-profile linear-slide dimmers and switches offers the following standard features: Square Law Dimming Voltage compensation (not applicable to NTCL-250) Power-failure
More informationTRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL
www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this
More informationTeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40
Characteristics Type of contactor LC- LC- LC- LC- LC-D & D09 D8 D2 D38 D40 D0 D9 LC-D0 DT20 & DT2 DT32 & DT40 Environment Rated insulation voltage (Ui) Conforming to IEC 947-4-, overvoltage category III,
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationI r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
Deliveryprogramme Circuitbr.,3pmotorprotection Partno. Articleno. 265784 NZMN4-ME875 Product range Circuit-breaker Protective function Motor protection Standard/Approval IEC Installation type Fixed Release
More informationAnalog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
More informationProtection against direct contact Finger and back of hand proof to VDE 0106 Part 100
Circuit-breaker3psystems/cableprot. Partno. NZMB2-A250 Articleno. 259090 Deliveryprogramme Range Circuit-breaker Protective function System and cable protection Standard/Approval IEC Installation type
More informationGV3P80 TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink
Characteristics TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink Main Range Product name Device short name Product or component type Device application Trip unit technology Complementary Poles
More informationLutron. Rania digital dimmer with remote control
Lutron Rania digital dimmer with remote control Rania IR For 230 V loads, multiway Max. 500 W, min. 50 W For 230 V and 12 V loads, multiway Max. 450 W/VA, min. 50 W/VA 86mm [3.386 86mm [3.386 Rania IR
More informationLED control gear Compact fixed output. Uconverter LCI 55 W 1400 ma O010 TOP series Ø4,4. Ordering data
Product description 1-channel for indoor use Inbuilt for luminaires of protection class I Output current and output voltage adjustable FA output 12 V TC input channel ominal life of 50,000 h (at ta max.
More informationInstallation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
More informationLutron. Rania digital dimmer. Rania For 230 V loads, multiway Max. 500 W, min. 50 W For 230 V and 12 V loads, multiway Max. 450 W/VA, min.
Lutron Rania digital dimmer Rania For 230 V loads, multiway Max. 500 W, min. 50 W For 230 V and 12 V loads, multiway Max. 450 W/VA, min. 50 W/VA 86mm [3.386 86mm [3.386 Rania dual For 230 V or 12 V loads,
More informationLONWORKS Fibre Optic Router
LONWORKS Fiber Optic Router LRW-112 and LRW-112/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-112 router offers an easy way to extend the distance between LONWORKS
More informationOrdering details. Approval. Classification
Datasheet - SRB 301MC-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301MC Fit for signal evaluation
More informationMagnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A
and 3DPT, 10 A UL Listed when used with proper Magnecraft s The 750R series octal base, plug-in relays offer clear or full-feature covers with multiple mounting options and accessories. 750R 750R Full-Feature
More informationCT7N CT7 CT7K 4 6 CT TJ 4 6 CT7K TKK 6 10 CT TK 6 9 CT7K TKL
Obsolete Overload Cross Reference Series CT7/CT7K to Cross Reference CT7 CT7K Directly Mounts to Contactor... Adjustment Catalog Adjustment Catalog Adjustment Catalog Code Code Range (A) Number Range (A)
More informationMaestro 0 10 V Dimmer Sensor
Maestro 0 0 V Dimmer Maestro 0 0 V Dimmer Lutron Maestro 0 0 V Dimmer s are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationAnalog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
More informationAriadni Dimmer For 250W CFL/Led, 600W Inc/Hal, or Lutron Hi-Lume A-Series Lte Led Driver, Clamshell Packaging In White
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AYCL253PHWH 1P 3WY 120V DMR Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features actuator
More informationLXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O
Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number
More informationLED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
More informationDimming actuators GDA-4K KNX GDA-8K KNX
Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...
More informationOPTEVA 828 LOBBY ATM FRONT LOAD PLAN VIEW FRONT ELEVATION SIDE ELEVATION
L0 CALL -800--600 OPTEVA 88 LOBBY ATM FRONT LOAD WITH 0mm ( 6") CEN III AND CEN IV SAFE CONSULT WITH DIEBOLD INSTALLATION/SERVICE BRANCH FOR ADDITIONAL DETAILS AND INFORMATION. PLEASE SEE PLANNING AND
More informationGV2P05. Main. Device short name. Device application
Product datasheet Characteristics GV2P05 Main Range Product name Device short name Product or component type Device application Trip unit technology TeSys TeSys GV2 GV2P Circuit breaker Motor Thermal-magnetic
More informationTeSys circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-ME GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping
More informationGV2ME083 TeSys GV2 - Circuit breaker - thermal-magnetic A - spring terminals
Product datasheet Characteristics GV2ME083 TeSys GV2 - Circuit breaker - thermal-magnetic - 2.5...4 A - spring terminals Main Range Product name Device short name Product or component type Device application
More informationHYL-080D1750G358. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Linear / area dimming Constant current LED driver DALI Dimmable Product description Dimmable built-in constant current LED Driver Adjustable output current between 1,050 and 1,750mA via DIP switch Max.
More informationAYCL253PBR Ariadni 250W Led 3WAY Dimmer Brown
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AYCL253PBR Ariadni 250W Led 3WAY Brown Lutron Catalog Number Manufacturer Description Weight per unit Product Category
More information02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationFibre optic router for TP/FT-10 LRW-112PP
Fibre optic router for TP/FT-10 LRW-112PP Lo n Wo r k s to fibre optic link, point-to-point applications The LRW-112PP router offers an easy way to extend the distance between LONWORKS 78 kbit/s TP/FT
More informationSafety Codes Council Conference Banff C Panel Discussion
Safety Codes Council Conference Banff 2014 90 C Panel Discussion Tim Driscoll OBIEC Consulting Ltd. George Morlidge Fluor Canada Ltd. Scott Basinger Eaton Canada René Leduc Marex Canada Limited Perspectives
More informationMaestro Dual Technology Sensor Switch
Dual Technology upancy Switch Maestro Dual Technology Switch 369773c 04.09.4 The MaestroR Dual Technology (Dual Tech) upancy Switch applies our exclusive XCTT Technology to the ultrasonic as well as the
More informationGV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A - screw clamp terminals. Main.
Product data sheet Characteristics GV2ME06 TeSys GV2-Circuit breaker-thermal-magnetic - 1...1.6 A - screw clamp terminals Main Range Product name Device short name Product or component type Device application
More informationGV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A -screw clamp terminals. Main.
Product data sheet Characteristics GV2ME04 TeSys GV2-Circuit breaker-thermal-magnetic- 0.4...0.63 A -screw clamp terminals Main Range Product name Device short name Product or component type Device application
More informationType: DILM25 10(24V50HZ) Article No.:
Type: DILM25 10(24V50HZ) Article No.: 277119 Ordering information Rated operational current AC 3 400 V I e A 25 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationLED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
More informationLED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES
pag. 1/13 FEATURES Outputs: 4 x channels BUS+SEQUENCER+FADER+DIMMER+DRIVER Input: DC 12/24/48 Vdc BUS Command: DALI LOCAL Command: 4x N.O. push button (with or without memory), 0-10V, 1-10V Controls: dimmer,
More informationLONWORKS Fibre Optic Converter
LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring
More information10 PDUs 19 PDUs Zero-U PDUs
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 www.legrand.com 10 PDUs Page 1. GENERL CHRCTERISTICS...1 2. EQUIPMENT ND PERFORMNCE...3
More informationGV2ME. Main. Device short name. Device application
Product datasheet Characteristics GV2ME32 TeSys GV2-Circuit breaker-thermal-magnetic - 24...32 A - screw clamp terminals Main Range Product name Device short name Product or component type Device application
More informationLED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
More informationPRELIMINARY Sunny Boy 240-US
PRELIMINARY Sunny Boy 240-US SB 240-US-10 Optimized reliability Simple installation Unrivaled monitoring SMA-backed security Multigate technology allows for reduced component count Private band powerline
More informationAPPLICATIONS typical application: Lighting automation Other applications of the SO and SI line of controllers: HVAC automation Industrial automation OVERVIEW The S Series are microprocessor based I/O controllers
More informationCAMTO LTD. Arc detecting system DC/AC
CAMTO LTD Arc detecting system DC/AC Arc detecting system DC/AC The system is based on experience with arc protection since 1962. The system units are built into boxes that all fit on a 35 mm DIN-rail.
More information10 SERIES. Light dependent relays A
10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact
More informationClimatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC
Deliveryprogramme Contactorrelay,3N/O+1N/C,AC Partno. DILER-31(230V50HZ,240V60HZ) Articleno. 051768 CatalogNo. XTRM10A31F Product range DILER Mini-contactors Application Contactor relays Description with
More informationNova T Controls. Wallbox Controls. Dimmers, Switches, and Accessories
Nova T s This series of classic thin-profile linear-slide dimmers and switches offers the following standard features: Square Law Dimming Voltage compensation Power-failure memory Superior RFI suppression
More informationMPCE Monitoring, Machine Test Signal. Guard Mode, Remote Reset. Eact Channel Select and Floating Blanking. Adjustable mounting brackets
MicroSafe MCF4700 C US File No. LR90200 MicroSafe Flexible MCF4700-12, MCF4700-20, MCF4700-30 12 mm, 20 mm and 30 mm resolution versions Compact segmented light curtain 1.02 inch (26 mm) x 1.1 inch (28
More informationHID control gear Electronic. PCIS, PCS outdoor FOX B011 PCI outdoor. Ordering data. Circuit power1. tc/ta for 60,000 h For luminaires with 1 lamp
Product description Pulse packets for increased ignition energy (pulsecontrol technology) Flicker-free light Colour stability thanks to constant power No acoustic resonance Safety shutdown if a lamp is
More informationDimming actuators of the FIX series DM 4-2 T, DM 8-2 T
Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T DM 4-2 T 4940280 DM 8-2 T 4940285 Updated: Jun-16 (Subject to change) Page 1 of 70 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2
More information