Incremental Hollow Shaft Encoder
|
|
|
- Lynn Davis
- 5 years ago
- Views:
Transcription
1 Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings, for industrial environments MECHANICAL SPECIFICATIONS Weight Material H.-Shaft Loads Max. rev. IP-rating Start Torque Mass Moment of Inertia Shock Bump Vibration About 50g (+cable = 0,040 Kg/meter) Housing - Aluminum Shaft - Brass Bearings - Lifetime lubricated ball bearings Fix. clamp - Brass axial maximum = 20 N radial maximum = 20 N 6,000 rev./min. IP 65 < 0,005 Nm at 25 C 2 3 gcm maximum 100G / 11 ms 10G - 16 ms (1000 X 3 axis) ( Hz)/ 10G ELECTRICAL SPECIFICATIONS Output Waveform Incremental (A, B) Output Signals Current No Load Max. load pr. output Supply-Voltage(Vin) V V out out low high Operating Temp. Storage Temp. Standard, Inverted, Differential (RS-422A compatible) 35 ma 20 ma(short circuit protected)* Min 4,5V to Max. 30V*, Reverse polarity protection maximum 500 I = 10 ma minimum (Vin I = -10 ma minimum (Vin I = -25 ma - 40 C to +85 C - 40 C to +85 C page 1
2 Incremental Hollow Shaft Encoder OUTPUT WAVEFORM CONNECTIONS Rotation: Clockwise (cw) from shaftside y 360 e x channel A channel A-inv channel B channel B-inv channel Z (gated) channel Z-inv (gated) Color code Green Yellow Grey Brown White Standard Ch A Ch B Ch Z Vcc 0-Volt Color code Pink Grey Green Yellow White Brown Blue Differential Ch A Ch A inv Ch B Ch B inv Ch Z Ch Z inv Vcc 0-Volt X = 180 e ± 36 e and Y = 90 e ± 18 e Z puls: Gated with A and B (standard) Options: TTL or HTL compatible.open Collector NPN or PNP Gated Z-puls or none-gated Z-puls. View more Output options in section 15 - page 1 to 2 MECHANICAL DIMENSIONS 20 5,5 23,00 5,35 Ø40 R 1,75 Ø21 Ø , M2 Ø25 6,80 60 View shaft options 7 page 2
3 Incremental Hollow Shaft Encoder SPRING COUPLING FOR TYPE SCH32 B or F Part no: ,50 Ø46 Ø53,5 (2,106 ) 31,70 32,3 R1,5 R3 0,30 Part no: R1,75 16,00 20 R1,00 0,30 2,00 Ø 2,1 Ø46 Ø40 Ø25 Ø 21,1 Ø ,00 16,00 20 Part no: ,5 R1,75 Ø 2,1 Ø46 Ø40 Ø25 Ø 21,1 Ø30 3,00 19,03 R1,00 page 3
4 Incremental Hollow Shaft Encoder SPRING COUPLING FOR TYPE SCH32 B or F Part no: ,2 Ø 25 Ø 20 Ø 30 Ø R1,5 R WARRANTY Scancon A/S warrants against manufacturing defects for a period of 12 months from the date of manufacture.product dimensions, weights and all product illustrations are approximate and may be modified without prior notice. This warranty does not cover problems or consequences due to common usage (wear and tear) for which the product was designed. Nor does it cover product failures caused by improper installation or use, overloading, incorrect maintenance, or operation outside the product's specifications. Detailed warranty information can be found in Scancon's Terms & Conditions page 4
5 Incremental Hollow Shaft Encoder FLAT RIBBON CABLE WITH IDC CONNECTORS MECHANICAL DIMENSIONS Options Flat Cable (only IP 50) Ribbon + IDC or AMP Only Differential 2,54 6 2, or 1000 or ,6 0,98 17,26 Add dimension for FACE on specific Encoder type Aprox L for Micro = 18 mm Aprox L for Mini = 18 mm Ø 24,4 for Mini Ø16 for Micro 500 or 1000 or ,9 10,3 For HP-compatible IDC ( Hewlett Packard ) order inverted ( I ) Channels CONNECTIONS CABLE AND PIN OUT IDC PIN NO Differential Output; D Vcc 0 volt (GND) A inv A B inv B Z inv Z Inverted Output; I (HP-compatible) A inv 0-Volt B inv VCC Z NOTE: Inverted also called HP-Standard (Hewlett Packard) Pin 1 red mark 1 2 CHARACTERISTICS -IP-rating: IP-50 -CE-marking not available -Cable take out only side wise -Only available with 0,5 meter, 1 meter and 2 meter -Output signal Differential D or Inverted I only page 5
6 Incremental Hollow Shaft Encoder ORDERING CODES Ordering Codes System Incremental Hollow Through Shaft Encoder SCH32B Ordering Codes: SCH32B XXXX X XX XX XX X Pulses pr. rev: No. of pulses XXXX Output signal: Other pulses are under construction Normal (TP-Standard) 3 channel = A, B, Z TP-Differential, 6 channel A, B, Z and A-inv, B-inv, Z-inv Line driver OL 7272 for extra long cable, up to 100 meters (Differential) Line driver chip 26C31 (V out low < 0,4 V) (RS-422A 5V) Only 5 Volt (Differential) N D M L Hollow Shaft Dimensions: (Tolerance G7) Ø 6 mm Ø 1/4 ( Ø 6,35mm) Ø 8 mm 3/8 ( Ø 9,525mm) 06 1/4 08 3/8 IP-rating: IP Cable Length: Standard 1 meter No. of meters 01 XX Cable take out: Side S Cable and connector options: Anti rotation spring coupling or Flange / Plate: View Section 14 page 7 to 11 View Section 8 page 15 to 16 page 6
Incremental Hollow Shaft Encoder
www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector
Material: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
Type SCH94FO. Type SCH94FO. Description
Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical
EZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
DKS 40: Incremental Encoder
DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. Besides has the DKS 4 a very high protection
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Smart-Encoder : Optical Incremental
1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables
EZ Encoder : Optical Incremental (P Series)
1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user
Absolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
ENC-MC58SN-L R-L1
MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses
ENC-CK58SN-L R-L1
CK58/ CK59/ CK60 Blind Hollow Shaft Encoder Series FETURES Standard Encoder for Heavy Industrial pplications Blind Hollow Shaft up to ø15mm 2 to 10,000 Cycles Per Revolution 8 to 40,000 Pulses Per Revolution
Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads
Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft
Photoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P
n n n n n Compact design: 59 mm mounting depth for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response Parameterization: Resolution, code type, direction,
Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS2 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 degrees in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Incremental encoder
Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
Absolute encoders multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution
DGS 35/34: Incremental Encoders for rough environmental conditions
Possible product variations: 1/4 and /8 in solid shafts with H E E T elect your individual encoder! A T A /4: Incremental Encoders for rough environmental conditions square flange or servo mount, through
DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions
,, 1/ and 3/34: Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variations: 1/4 and 3/8 in solid shafts with square flange or servo mount, through
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price
E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features
Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
Linear encoders without bearings incremental System for linear motion feedback
Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system
Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...
Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3
VFS60: Motor Feedback System for installation on asynchronous motors
Data heet : Motor eedback ystem for installation on asynchronous motors elect the motor feedback system to suit your individual requirements. Possible product variations: Photo: Wieland Werke G Through
RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics
RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output
40 A6B2 INCREMENTAL ROTARY ENCODERS,OUTSIDE DIAM 40 MODEL A6B2 SUBSTITUTE E6B2
ROTRY ENCODERS 40 6 INCREMENT ROTRY ENCODERS,OUTSIDE DIM 40 MODE 6 SUSTITUTE E6 Sequence Number 40 outsidediam diam 40 : C: PNP open collector Open collector output Push Pull output S: singleness W: 90
ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
DKS 40: Incremental Encoder
DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. In addition the DKS 4 has a very high protection
Ø50mm Shaft Multi-Turn Absolute Type
Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit Differential RS422 line driver output. Two count channels ( A & B ) wave in quadrature with compliments and index Low cost non-contacting linear
MICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
ARS 20, ARS 25: Single-turn Absolute Encoders. Modular Design for tailor-made solutions.
, : ingle-turn bsolute Encoders. Modular Design for tailor-made solutions. Maximum reliability as a result of opto-ics with Chip-on-Board technology quare flange, servo and face mount options with 1/4,
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
Optical SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational
Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Model # of Colors Colors Input Connection 1 K90TLGRPQ 2 Green, Red K90TLGYRPQ 3 Green, Red, Yellow K90TLBGYRPQ 4 Blue, Green, Yellow, Red
Datasheet Large Multicolor that Alternates Between Active Inputs Bright, uniform indicator light Alternates between colors when multiple inputs are active Models are available with up to five colors in
General Wiring and Installation Guidelines. Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers
General Wiring and Installation Guidelines Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers Congratulations on your purchase of a Dynapar brand encoder.
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
Specifications. Mechanical Information. Mass (grams) Dimensions (mm) 15 x 75 Housing. Anodised Aluminium Isolated Body
Beta TX Datasheet Beta-TX The Beta-TX is a complete self contained laser diode system which can operate in both CW and modulation modes. The Beta- TX features high speed modulation with a bandwidth of
HOG 86. The incremental HeavyDuty encoder for highest demands
HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN
LM10 linear magnetic encoder system
RLS merilna tehnika d.o.o. Cesta II. grupe odredov 5 SI-161 Ljubljana - Dobrunje Slovenia T +86 1 57100 F +86 1 5719 E mail@rls.si www.rls.si Installation guide Issue 4, 14 th January 009 LM10 linear magnetic
WLS27 Multicolor LED Strip Light with EZ-STATUS
WLS7 Multicolor LED Strip Light with EZ-STATUS Instruction Manual Banner's WLS7 Multicolor LED Strip Light has a sturdy aluminum housing and is encased in a shatterproof, UV-stabilized, copolyester shell,
SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
PSM-003. Micro Polarization Controller/Scrambler. User Guide
PSM-003 Micro Polarization Controller/Scrambler User Guide Version: 1.0 Date: August 23, 2012 General Photonics, Incorporated is located in Chino California. For more information visit the company's website
Operating Instructions
CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target
Incremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range
ProduCt information Incremental Encoder DFS60 in a class of its own The high-resolution incremental encoder range PDF processed with CutePDF evaluation edition www.cutepdf.com DFS60 In a class of its own
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders
Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Scott Hewitt, President SICK STEGMANN, INC. Dayton, OH www.stegmann.com sales@stegmann.com 800-811-9110 The
EZ-LIGHT K30L Series With Independent Push Button Contact
EZ-LIGHT K0L Series With Independent Push Button Contact Datasheet Compact with One, Two, or Three s and a Momentary Push Button Output Rugged, cost-effective and easy-to-install multicolor indicator light
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
Installation and Wiring Guide
Installation and Wiring Guide Precision Products For Every Application British Encoder Products Company Unit 33 gate Industrial Estate Wrexham Wales, United Kingdom LL13 8UG Phone: +44(0)1978262100 Fax:
Incremental Rotary Encoders
Incremental Rotary Encoders Rotary Magnetic Incremental Encoder Encoders ELTRA are designed in order to control the position and the angular speed of moving mechanical axels. Rotary Incremental Eltra encoder
1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
Linear Probe Encoder Page 1 of 7. Description. Features
Page 1 of 7 Description The PE series linear plunger-style optical encoder has a machined aluminum enclosure. The PE provides either single-ended or differential quadrature encoder output in a convenient
EZ-LIGHT K90FDL Daylight Visible
Datasheet Large one to five color daylight visible indicator with flashing input control Intense levels of light output for areas with high ambient light - even outdoors All models have flashing input
EZ-STATUS WLS28-2 Multicolor LED Strip Light
EZ-STATUS WLS8- Multicolor LED Strip Light Datasheet Banner's WLS8- Multicolor LED Strip Lights have sturdy aluminum housings, shatterproof windows, and environmental ratings that make it ideal for harsh
Operating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
SPACESCAN SERIES SS 02
Description 0-10 metre sensing range 12 to 384 channels Available with channel spacing of 5, 10 or 20 mm Active length of 225 mm to 1920 mm Housing length of 300 mm to 1980 mm Plug connection 18-30 V dc
DFS60 Incremental Encoders. High-resolution, programmable encoder for complex applications and high operational demands
P r o d u c t i n f o r m at i o n DFS60 Incremental Encoders High-resolution, programmable encoder for complex applications and high operational demands DFS60 Incremental encoders High-resolution, programmable
AS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs
control motion interface GV 460 / GV 461 Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs GV 480 / GV 481 Impulse Splitters for Incremental Encoders with all-around
The HSMB-C110 is a right-angle package with the universally accepted dimensions of 3.2 x 1.0 x 1.5 mm. This part is ideal for
Surface Mount Chip LEDs Technical Data HSMB-C19/C17/C11 Features Small Size Industry Standard Footprint Compatible with IR Solder Diffused Optics Operating Temperature Range of -3 C to +85 C Right Angle
Contactless encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED LED indicates measuring range Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024,
GB-ER series. Direct connection to LH70/71 series
GB-ER series Direct connection to LH70/71 series 21/12/2007 Product comparison GB-A series Cable length : 3m, 5m, 10m Waterproof connector CH01 Multi-gap head PM output Up/Down output GB-ER series Cable
Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness
Gurley Models LA18, LA20, LA25, and LA35 Absolute Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: absolute Max Resolution: 0.5 to 8µm High Resolution - Industrial Ruggedness ingenuity@work
RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B
Issue 1, 29 th September 2014 RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B RLC is a PCB level encoder for rotary measurements. With its compact design it is suitable for integration
Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide
Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide
Speed sensor MiniCoder GEL 2471
Speed sensor MiniCoder GEL 2471 for electrically conducting toothed-wheels Technical information version 10.02 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless
EAM PROFIBUS MULTITURN ABSOLUTE ENCODER PRESENTATION HARDWARE INSTALLATION DEVICE MULTITURN ABSOLUTE ENCODERS EAM PROFIBUS
EAM PROFIBUS MULTITURN ABSOLUTE ENCODER PRESENTATION The Eltra multiturn Pro bus encoder series (Identi cation Number 0x0599) is complying to the Pro bus DP standard as described on the European Standard
Linear measuring technology
raw wire encoder 80 The draw wire mechanics 80 can be used up to a measuring length of 3 meters These draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute
MODEL HS35 DRAWWORKS OPTICAL ENCODER
MODEL HS35 DRAWWORKS OPTICAL ENCODER Product Description This specially configured DrawWorks Model HS35 encoder combines rugged, heavy-duty features into a unique through-shaft style for use as a winchturns
Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151
Compact, rugged housing Many mounting possibilities Status displayed via LED Measuring range indicated via LED Immune to electromagnetic interference Measuring range programmable via Easy Teach Output
RLS Series RLS-GD-20/20 -UV. Design. RLS-GD Series Gloss Detection Sensors. Accessories: (cf. page 9) Product name:
RLS Series RLS-GD-20/20 -UV Detection of Glass Coating - Insensitive to outside light due to clocked UV illumination - Receiver (20 ) and reference - Storing of up to 31 gloss degrees (gloss values) -
The VFS60 is a high-resolution. Excellent concentricity and excep- immunity. tional robustness are achieved
to suit your individual requirements. Possible product variations: Through hollow or blind hollow shaft Cable outlet universal.5 m or 1.5 m oto: Wieland Werke G Number of lines from 1 up to 5.53 Interfaces
ENC - LKE51 - L I B
ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance
Cylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
GENERAL INFORMATION. B-nB, D-nD. Amplitude Vpp Offset / Asymmetry Amplitude ratio A/B Phase A to B 0,5±20% 2,5±10% - -
GENERAL INFORMATION SmarSens INTRODUCTION SmarSens is a range of Hohner encoders that give a single encoder the possibility of absolute and incremental signals. Its compact and robust design with numerous
Encoders. for Robotic Systems, Motors & OEM Applications
Encoders for Robotic Systems, Motors & OEM Applications ENCODERS for Robotic Systems, Motors & OEM Applications Lika Electronic designs and manufactures a comprehensive selection of standard and frameless
R&S ZVA-Zxx Millimeter-Wave Converters Specifications
R&S ZVA-Zxx Millimeter-Wave Converters Specifications Data Sheet Version 19.00 CONTENTS Definitions... 3 General information... 4 Specifications... 5 Test port... 5 Source input (RF IN)... 5 Local oscillator
DIRECT DRIVE ROTARY TABLES SRT SERIES
DIRECT DRIVE ROTARY TABLES SRT SERIES Key features: Direct drive Large center aperture Brushless motor design Precision bearing system Integrated position feedback Built-in thermal sensors ServoRing rotary
SERIES 400 SERIES 620
x 0. 0... PUR cable type,000 Hz SERIES 00 SERIES 0 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type / Connector S,000 Hz 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type,000 Hz x
MAGNETIC TAPE. Series MB. incremental scale. Key-Features:
MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available
Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 16 bits singleturn Process value in 32 bit telegram 3 error bits 16 bits singleturn 15
34MD Series. Motor/Driver Combination. User s Guide E. Landon Drive Anaheim, CA
34MD Series Motor/Driver Combination User s Guide A N A H E I M A U T O M A T I O N 4985 E. Landon Drive Anaheim, CA 9287 e-mail: info@anaheimautomation.com (714) 992-699 fax: (714) 992-471 website: www.anaheimautomation.com
AF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
Displacement Measuring System for Cylinder Series OSP-P
-SENSOFLEX Displacement for Cylinder Series OSP-P Overview...112 Technical Data SFI-plus...113 Dimensions SFI-plus...114 Order Information...115 111 Sensoflex - Sensoflex Displacement measuring system
Contactless Encoder SSI RI360P0-QR24M0-HESG25X3-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Positioning element and aluminium ring not incl. output 25 bit, Gray-coded clock rate: 62.5 KHz 1 MHz Single or multiturn, length
SPECTRO Series SPECTRO-3-30-UV. Design. SPECTRO-3 Series True Color Sensors. Product name: Accessories: (p. 9-10)
SPECTRO Series SPECTRO-3-30-UV - Measuring range typ. 15 mm... 80 mm - Ideal adjustment to luminescent objects - Up to 31 colors can be stored - RS232 interface (USB or Ethernet adapter is available) -