TANDEM10-VF 3G/HD/SD audio embedder/de-embedder

Size: px

Start display at page:

Download "TANDEM10-VF 3G/HD/SD audio embedder/de-embedder"

Heather Bruce
5 years ago
Views:

It wks with 3Gb/s, HD SD video with synchronous 48kHz, asynchronous 48kHz, synchronous E analogue. provides flexible embedding de-embedding of external.

1 3G/HD/SD embedder/de-embedder is a very powerful flexible four group embedder/de-embedder system. You can use it when you need to embed de-embed at the same time if you want a single product use as an embedder de-embedder as required. can be used with a variety of signals. It wks with 3Gb/s, HD SD video with synchronous 48kHz, asynchronous 48kHz, synchronous E analogue. provides flexible embedding de-embedding of external. Using piggybacks can input put a mixture of up to eight stereo pairs four analogue stereo pairs ( eight mono channels) with this external easily combined with embedded in the incoming video input using the powerful rers. offers the most video puts yet on a Crystal Vision embedder/deembedder, while other useful features include video processing, flexible delay compensation, input/put connectivity comprehensive signal moniting. With up to 20 cards fitting in the Vision 3 frame, saves you rack space can be housed alongside any other interface IP cards from the Vision range. Four group embedder/de-embedder Wks with 3Gb/s, HD SD video both analogue Saves money: ideal applications requiring both embedding de-embedding at the same time, those who want to buy just one device to embed de-embed as required Flexible embedding de-embedding of external : use piggybacks to input put up to eight stereo pairs four analogue stereo pairs ( eight mono channels) Powerful ring: full channel shuffling overwriting Easy to match all your signals: additional delay of up to 400ms additional ten frames of video delay Ideal synchronous E users: allows embedding de-embedding of synchronous E, while the ten frames of video delay can be used to match E delays Optimise the : with full processing including individual gain adjustments, stereo to mono conversion channel muting inversion Optimise the video: video proc-amp including RGB YUV lift gain controls Optional integrated input/put connectivity means you won t be limited by cable lengths Get peace of mind by knowing the status of your signal: easily monit a large number of video alarms Flexible remote control moniting using frame integrated control panel, VisionPanel remote control panel, ASCII JSON protocols, SNMP the web browser-based VisionWeb Control Save rack space: 96mm x 325mm card allows up to 20 in 3U

EMBED AND DE-EMBED ANALOGUE OR DIGITAL AUDIO (OR BOTH) Crystal Vision has always been known creating the industry s most flexible embedded products.

2 EMBED AND DE-EMBED ANALOGUE OR DIGITAL AUDIO (OR BOTH) Crystal Vision has always been known creating the industry s most flexible embedded products. Not only can be used as either an embedder, a de-embedder a mixed embedder/ de-embedder, it can be used with, analogue a mixture of both. embeds de-embeds external by fitting up to two piggybacks to the main card. These external channels can be red to from any of the four groups processed by. Three different piggybacks are available. The is used inputting two stereo pairs four mono channels of external analogue. The is used putting two stereo pairs four mono channels of analogue. The DIOP4 is used inputting putting four stereo pairs of external digital ; four bi-directional pts allow each stereo pair to be independently configured as input put. It is possible to fit two of the same piggybacks to fit two different piggybacks to create the product required. F example, analogue digital piggybacks can be mixed to create a hybrid system ideal those using analogue microphones with digital mixers in the studio. is aware of which piggybacks are fitted adjusts the menus rers to reflect the s available. The following table shows the combinations of piggybacks allowed: Front position (nearest hle) Rear position (nearest edge connect) This combination allows you to... None None Shuffle process from your input video DIOP4 None Input / put four external stereo pairs (each stereo pair configured independently as input put) None Input two external analogue stereo pairs ( four mono channels) None put two analogue stereo pairs ( four mono channels) externally DIOP4 DIOP4 Input / put eight external stereo pairs (each stereo pair configured independently as input put) DIOP4 DIOP4 Input / put four external stereo pairs (each stereo pair configured independently as input put) input two external analogue stereo pairs ( four mono channels) Input / put four external stereo pairs (each stereo pair configured independently as input put) put two analogue stereo pairs ( four mono channels) externally Input four external analogue stereo pairs ( eight mono channels) Input two external analogue stereo pairs ( four mono channels) put two analogue stereo pairs ( four mono channels) externally put four analogue stereo pairs ( eight mono channels) externally POWERFUL AUDIO ROUTING includes powerful ring, allowing full shuffling overwriting of the mono channels taken from the incoming video input input piggybacks. At the heart of are two mono ring matrices. The first is the Embedded put rer which is used to select which of up to 32 input channels (16 channels deembedded from the input video 16 channels from two input piggybacks) should be embedded into up to four groups on the put video. HANC cleaning removes the iginal version of old groups. The second is the Discrete put rer is used to select which of up to 32 input channels should be put externally as analogue via the piggybacks. EASY TO MATCH ALL YOUR SIGNALS As well as featuring sht minimum delays both the video to help prevent system lip-sync complications, makes it easy to compensate any delay between the incoming video match all the signals. An adjustable delay of up to 400ms (adjustable in 1ms steps) provides flexibility in compensating any delays introduced by other equipment. Up to ten frames of video delay (adjustable in one frame steps) can be used to match any big system delays, such as those created by E encoding decoding transcoding to AC3 reembedding. This allows the video timing to be brought back into alignment at points where it matters (such as when switching signals approaching a mixer) theree avoid lip-sync errs. OPTIMISE THE AUDIO includes full processing of the linear. The levels can be increased decreased to match the rest of your system, even be muted to silence. There are 32 gain controls, one each of the available input channels. Each gain control is independently adjustable between +18dB -18dB in 0.1dB steps. Each of the input channels can also be individually inverted allowing you to crect any reversed wiring of differential pairs. Stereo to mono conversion is available to help those broadcasting a multi-language service. Audio resampling is set by default (except E) is used to seamlessly match the timing of signals when the usercontrolled delay is altered. OPTIMISE THE VIDEO includes a video proc-amp picture optimisation, with adjustment of the video ga black level independent RGB YUV gains.

is very straightward to operate. See the REMOTE CONTROL section of the SPECIFICATION the extensive list of features that can be controlled monited. The interactive VisionWeb GUIs are available at www.

3 REMOTE CONTROL VisionWeb All control is done remotely. The control moniting s include an integrated control panel on the Vision 3 frame, the VisionPanel remote control panel, our ASCII JSON protocols, SNMP the VisionWeb web browser control. is very straightward to operate. See the REMOTE CONTROL section of the SPECIFICATION the extensive list of features that can be controlled monited. The interactive VisionWeb GUIs are available at allow you to exple the full functionality of the product. FIBRE CONNECTIVITY ON THE CARD If you need to embed de-embed signals from beyond your local equipment bay, it s easy to give integrated connectivity. Just der either the input, put input put. With a fitted you could easily, example, take signals from another part of the building de-embed into the mixer, embed from the mixer then send the signals to another area. Designed SMPTE sht-haul applications, the is used to receive an optical input the to transmit an optical put using a Class 1 laser. The can do both giving you simultaneous input put. With a fitted you can select your video input source to be taken either from the input BNC the optical input. Having the integral to the card reduces the need to use up additional rack space separate optic transmitters receivers as well as saving you money. can also suppt a CWDM laser if required. SAVE RACK SPACE Housed in the Vision frames, is a space-saving 96mm x 325mm card that sits in one frame slot allowing up to 20 embedders/ de-embedders in 3U, depending on the rear module fitted. can be used with three different frame rear modules to access the inputs puts. The single slot is used 110 ohm analogue applications which use BNCs the provides three video puts. The single slot is designed those using 110 ohm analogue with a input put. It provides two BNC video puts with the input fitted, three video puts (one on two on BNC) with either the put the input put fitted. The double slot is designed all 75 ohm applications, including those using a input put. It provides three BNC video puts with the when no is fitted, four video puts (one on three on BNC) with either the the. THE INPUTS AND OUTPUTS Mono ring (auto configured accding to piggyback s fitted) Mute Invert Delay Stereo to mono on/off 4 pairs (8 channels) 2 Analogue pairs (4 channels) 4 pairs (8 channels) 2 Analogue pairs (4 channels) 4 pairs (8 channels) 2 Analogue pairs (4 channels) 4 pairs (8 channels) 2 Analogue pairs (4 channels) E detect Audio gain resampling E Mono ring (auto configured accding to piggyback s fitted) Mute Invert Delay 8 / E pairs 8 / E pairs Stereo to mono on/off 3Gb/s HD SD De-embed four groups Video proc-amp (RGB YUV) Video delay (0 to 10 frames) Embed four groups 3Gb/s HD SD x 3 if using x 2 if using 3Gb/s HD SD input via (al) 3Gb/s HD SD put via (al)

REAR MODULE CONNECTIONS F 110 ohm analogue applications ( ) x 2x 2x 2 in in in slotslotslot () () () 8 x8 / x8/ x / 8 x8 analogue x8analogue x analogue in in in 1a In 1a I/O 1b in in in Double Double

4 REAR MODULE CONNECTIONS F 110 ohm analogue applications ( ) x 2x 2x 2 in in in slotslotslot () () () 8 x8 / x8/ x / 8 x8 analogue x8analogue x analogue in in in 1a In 1a I/O 1b in in in Double Double Double slotslotslot 8 x8 / x8/ x / EE E in in in ) ) ) 1c 7 I/O 8 I/O 1b 1 I/O Audio I/O Audio I/O () () () 1b 1c NB.NB. NB. nono no BNC BNC BNC ohm 75 ohm ohm applications, applications, applications, in in in In 1 NB.NB. NB. in in in ) ) ) 2 I/O 3 I/O 4 I/O slotslotslot ) ) ) 5 I/O 8 x8 / x8/ x / 8 x8 analogue x8analogue x analogue in in in 6 I/O In x 3x 3x 3 1a x 3x 3x 3 F all 75 ohm applications ) I/O F 110 ohm analogue applications ) Specification Automatic de-embedding to SMPTE 272 SMPTE Optical wavelength: nm (1310 typical) Extinction ratio: 7.5dB INTEGRATED FIBRE OPTIONS Weight: 180g (with no piggybacks); 220g Laser safety classification: Class 1 FDA TANDEM 10-VF can be given integrated (with two piggybacks) connectivity by fitting the IEC Laser Safety compliant Power consumption: 10 Watts (); 1.6 Watts (); 1.5 input, put Loss of input will automatically disable the input put. The laser put. The put can also be Watts (); 1 Watt (DIOP4); 0.6 manually enabled disabled Watts ( ); 1 Watt () chosen should be fitted at the facty CWDM laser can be fitted on request. The VIDEO INPUT To access the optical inputs puts a 18 put wavelengths defined by the ITU One 3Gb/s HD SD input ( 110 ohm analogue ) are 1271, 1291, 1311, 1331, 1351, 1371, ( 75 ohm ) frame rear When using input 1391, 1411, 1431, 1451, 1471, 1491, module must be used s allows selection between one 1511, 1531, 1551, 1571, 1591 optical one electrical input, meet the SMPTE 1611nm. F CWDM, der the FOP-CWDM-VF specify the wavelength sht-haul specification, 270Mb/s 1.5Gb/s 3Gb/s serial required allowing operation with single-mode compliant to SMPTE 259, SMPTE multi-mode SMPTE 424/425-A VIDEO OUTPUTS The video mats suppted are 625, 525, Connect type: LC Up to four 3Gb/s, HD SD puts 720p50, 720p59.94, 1080PsF23.98, depending on impedance frame input: 1080PsF24, 1080i50, 1080i59.94, rear module used Optical wavelength: nm 1080p p59.94 Using single slot rear module (110 Input level maximum: -1dBm 3Gb/s cable equalisation up to 100m using ohm analogue ): Three BNC Input level minimum: Typical -20dBm Belden 1694A. HD cable equalisation up to video puts (-18dBm 3Gb/s pathological) 140m with Belden 1694A equivalent Using single slot (110 ohm (approx. 100m with Belden 8281). SD put: analogue ): cable equalisation >250m Belden 8281 Optical power: Max 0.0dBm, min -5.0dBm ith input : Two BNC equivalent pigtail: -mode 9/125uM video puts ith put : Three video puts (one on two on BNC) ith input put : Three video puts (one on two on BNC) Using double slot (75 ohm ): ith no : Three BNC video puts ith input : Three BNC video puts ith put : Four video puts (one on three on BNC) ith input put : Four video puts (one on three on BNC) Serial put: 270Mb/s 1.5Gb/s 3Gb/s serial compliant to SMPTE 259, SMPTE SMPTE 424/425-A. put follows the input mat Audio is embedded to SMPTE 272 SMPTE On loss of input the put can be user selected as black, blue no put

5 AUDIO INPUTS AND OUTPUTS Up to two piggybacks can be added to the main card. Each piggyback allows either input put of four external stereo pairs two external analogue stereo pairs (four mono channels). These channels can be red to from any of the four groups processed by Use to input analogue. Fit one piggyback two stereo pairs (four mono channels) two piggybacks four stereo pairs (eight mono channels) Use to put analogue. Fit one piggyback two stereo pairs (four mono channels) two piggybacks four stereo pairs (eight mono channels) Use bi-directional DIOP4 to input put 75 ohm 110 ohm. one piggyback four stereo pairs two piggybacks eight stereo pairs (with each stereo pair configured independently as either 24 bit input put) Different piggybacks can be used together, allowing embedding de-embedding at same time mixture of analogue digital There are rules regarding which piggybacks can be fitted in the front rear positions TANDEM 10-VF can embed de-embed analogue, synchronous 48kHz, asynchronous 48kHz synchronous E. Linear can be resampled. E cannot be resampled. A manual resampler on/off control allows to embed synchronous compressed such as AC3 Specification continued between -18dB +18dB in 0.1dB steps with 0dB calibration. There are a total of 32 gain controls, the 16 channels of de-embedded from the video 16 channels of external Mute Inversion Stereo to mono conversion VIDEO PROCESSING Video proc-amp picture optimisation, with adjustment the video ga black level independent RGB YUV gains Video gain: Modify the gain of the whole video signal from 0 to +200% RGB lift: Offset the colour component by +/- 10% RGB gain: Modify the gain of the colour component from +80% to +120% YUV lift: Offset the luminance, U Y component by +/- 10% YUV gain: Modify the luminance, U Y component gain from 0 to +200% ANCILLARY DATA Ancillary data passed unless set to blank (by enabling VANC blanking) AUDIO SILENCE An level check is permed. The silence level setting can be selected from -48dBFS, -54dBFS, -60dBFS, -66dBFS, -72dBFS, -78dBFS, -84dBFS -90dBFS. If the signal level falls below the selected level a period of time from 2 to 120 seconds, then an alarm is triggered. The on the channels must be continuously silent the full period a single non-silent sample restarts the delay period DELAY THROUGH BOARD Minimum video in to delay: <1 line Minimum embedding delay: <200us LED INDICATION OF: VIDEO DELAY Power okay Up to ten frames of video delay adjustable in PRESETS one frame steps allows compensation The current card settings can be saved in any big system delays such as E one of 16 locations to be recalled as encoding decoding transcoding to required AC3 re-embedding Presets can be backed up rested using AUDIO DELAY the Vision frame Adjustable delay of up to 400ms on REMOTE CONTROL each stereo pair will compensate any Control from integrated control panel on delay between the incoming video Vision 3 frame remote panel signals. Delay is either on off any given stereo pair can be set to follow VisionWeb Control is available via the web the video frame delay server on the frame allows control moniting using a stard web browser AUDIO REPLACE on a computer, tablet phone has two input/put mono SNMP moniting control available as ring matrices. The first is the stard Embedded put rer, the second is the Discrete put rer. This second rer Control using ASCII JSON protocols will not be shown if neither n Checks can be permed on video DIOP4 piggybacks are fitted parameters (see below), with These rers are auto configured warnings of any problems provided via accding to the piggyback s fitted to SNMP traps. The video black video the motherboard, to a maximum of 32 x 16 frozen parameters can be delayed by up to each rer 60 seconds bee an alarm is asserted to prevent false alarming during brief video HANC cleaning removes the iginal version pauses. The parameters can be of old groups delayed by up to 120 seconds bee an AUDIO PROCESSING alarm is asserted to prevent false alarming Audio processing can be applied to linear during quiet periods only. It cannot be applied to E Remote control of video delay (0 to 10 Gain level adjustment on each channel frames) mat to delay, what to show on video input loss, RGB proc-amp, YUV proc-amp, VANC blank enable, laser input put enable, video black time delay, video frozen time delay, I/O configuration termination, silence indication time delay threshold, inversion of any of the individual embedded discrete channels, resampling of any of the embedded discrete channel pairs, mono any of the embedded discrete channel pairs, muting any of the embedded discrete channel pairs, ga user delay (-20ms to 400ms), matching the delay to the video delay on any of the channel pairs from the embedded discrete, selecting the user delay any of the channel pairs from the embedded discrete, embedded put rer, discrete put rer, groups to put, SMPT Sony embedder mode (SD only), card defaults presets save recall Remote moniting of the following: As stard: Video present Video black Video frozen Video mat Input group 1 present Input group 2 present Input group 3 present Input group 4 present put group 1 present put group 2 present put group 3 present put group 4 present All silent Front rear piggyback types Audio present on input group 1 channel 1 Audio present on input group 1 channel 2 Audio present on input group 1 channel 3 Audio present on input group 1 channel 4 Audio present on input group 2 channel 5 Audio present on input group 2 channel 6 Audio present on input group 2 channel 7 Audio present on input group 2 channel 8 Audio present on input group 3 channel 9 Audio present on input group 3 channel 10 Audio present on input group 3 channel 11 Audio present on input group 3 channel 12 Audio present on input group 4 channel 13 Audio present on input group 4 channel 14 Audio present on input group 4 channel 15 Audio present on input group 4 channel 16 Silence group 1 channel 1 Silence group 1 channel 2 Silence group 1 channel 3 Silence group 1 channel 4 Silence group 2 channel 5 Silence group 2 channel 6 Silence group 2 channel 7 Silence group 2 channel 8 Silence group 3 channel 9 Silence group 3 channel 10 Silence group 3 channel 11 Silence group 3 channel 12 Silence group 4 channel 13 Silence group 4 channel 14 Silence group 4 channel 15 Silence group 4 channel 16 E on input group 1 channels 1 2 E on input group 1 channels 3 4 E on input group 2 channels 5 6 E on input group 2 channels 7 8 E on input group 3 channels 9 10 E on input group 3 channels E on input group 4 channels E on input group 4 channels With front DIOP4 fitted: 1 present 2 present 3 present 4 present Silence 1 Silence 2 Silence 3 Silence 4 E on 1 E on 2 E on 3 E on 4 With rear DIOP4 fitted: 5 present 6 present 7 present 8 present Silence 5 Silence 6 Silence 7 Silence 8 E on 5 E on 6 E on 7 E on 8 With front fitted: Silence analogue channels 1 2 Silence analogue channels 3 4 With rear fitted: Silence analogue channels 9 10 Silence analogue channels With input fitted: Received power (-25dBm to 0dBm in 1dBm steps) Optical input power level (Overload, High, Good, Low Too low) With put fitted: Laser level Laser bias DUAL ANALOGUE AUDIO INPUT PIGGYBACK Power consumption: 1.6 Watts

6 Specification continued AUDIO INPUTS Two analogue stereo pairs four mono channels. 24 bit quantising A to Ds. High input impedance (20 kohm) balanced INPUT LEVEL RANGE 0dBFS = +28dBu max / 0dBFS = +12dBu min Facty set default: 0dBFS = +18dBu +24dBu by on board link SIGNAL TO NOISE 99dB (+18dBu) rms., 22Hz to 22kHz typ. TOTAL HARMONIC DISTORTION 0.004% THD+N rms., 22Hz to 22kHz typ. INTERCHANNEL CROSSTALK -110dB at 1kHz, -90dB at 20kHz, rms., typ. DUAL ANALOGUE AUDIO OUTPUT PIGGYBACK Power consumption: 1.5 Watts AUDIO OUTPUTS Two analogue stereo pairs four mono channels. 24 bit quantising D to As. Low put impedance (66 ohm) balanced INPUT LEVEL RANGE 0dBFS = +28dBu max / 0dBFS = +12dBu min Facty set default: 0dBFS = +18dBu +24dBu by on board link SIGNAL TO NOISE 99dB (+18dBu) rms., 22Hz to 22kHz typ. TOTAL HARMONIC DISTORTION 0.002% THD+N rms., 22Hz to 22kHz typ. INTERCHANNEL CROSSTALK -110dB at 1kHz, -90dB at 20kHz, rms., typ. DIOP4 QUAD DIGITAL AUDIO INPUT AND OUTPUT PIGGYBACK Power consumption: 1 Watt AUDIO INPUTS AND OUTPUTS Four 24 bit stereo pairs Software selectable as 110 ohm /EBU balanced 75 ohm 3-id unbalanced on a per-diop4 basis (all four connections have the same impedance) Individually configurable as inputs puts Asynchronous to video 48kHz ppm TOTAL HARMONIC DISTORTION With asynchronous inputs: < % (-120dB) DIOP4 ORDERING INFORMATION 3G/HD/SD four group embedder/de-embedder (allows fitting of up to two piggybacks input put of external analogue ) Analogue input piggyback. one piggyback two stereo pairs (four mono channels) two piggybacks four stereo pairs (eight mono channels) Analogue put piggyback. one piggyback two stereo pairs (four mono channels) two piggybacks four stereo pairs (eight mono channels) Digital input put piggyback. one piggyback four stereo pairs two piggybacks eight stereo pairs (with each stereo pair configured independently as input put) input card put card. F CWDM laser s, contact Crystal Vision input put card Vision 3 3U frame with active front panel featuring smart CPU integrated control panel up to 20 Crystal Vision cards from the Vision range VisionPanel VisionWeb Control slot frame rear module. Allows 20 in 3U. Suitable 110 ohm analogue. Gives access to one 3Gb/s, HD SD input, three 3Gb/s, HD SD puts (on BNC) all inputs puts slot frame rear module. Allows 20 in 3U. Suitable 110 ohm analogue. Designed applications using inputs / puts. When using input, allows you to select between one one electrical 3Gb/s, HD SD input gives two 3Gb/s, HD SD puts (on BNC) all inputs puts. When using FOP- VF put, gives access to one 3Gb/s, HD SD input, three 3Gb/s, HD SD puts (one on two on BNC) all inputs puts. When using input put, allows you to select between one one electrical 3Gb/s, HD SD input gives three 3Gb/s, HD SD puts (one on two on BNC) all inputs puts Two slot frame rear module. Allows ten in 3U. Suitable 75 ohm. Designed 75 ohm applications using either BNC inputs / puts. When not using a, gives access to one 3Gb/s, HD SD input, three 3Gb/s, HD SD puts (on BNC) all inputs puts. When using input, allows you to select between one one electrical 3Gb/s, HD SD input gives three 3Gb/s, HD SD puts (on BNC) all inputs puts. When using put, gives access to one 3Gb/s, HD SD input, four 3Gb/s, HD SD puts (one on three on BNC) all inputs puts. When using input put, allows you to select between one one electrical 3Gb/s, HD SD input gives four 3Gb/s, HD SD puts (one on three on BNC) all inputs puts 3U Ethernet remote control panel with touch screen VisionWeb web browser control included within frame software SNMP SNMP moniting control included in frame Permance features are subject to change. Figures given are typical measured values Crystal Vision Ltd. Lion Technology Park, Station Road East, Whittlesd, Cambridge CB22 4WL, Engl. Tel: +44 (0) Fax: +44 (0)

3G/HD/SD audio embedder/de-embedder

3G/HD/SD audio embedder/de-embedder 3G/ audio embedder/de-embedder is a very powerful embedding/ de-embedding product: working with 3Gb/s, HD and SD sources and providing flexible embedding and de-embedding of external audio. Using piggybacks