User Manual. HDMI Extender EX0101-N EX0101-N

Size: px

Start display at page:

Download "User Manual. HDMI Extender EX0101-N EX0101-N"

Loren Skinner
5 years ago
Views:

1 User Manual HDMI Extender EX0101-N EX0101-N

2 Important Safety Instructions Notes In case of any content change, we are sorry for no further notice. Warnings To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Clean this apparatus only with dry cloth. 2. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. 7.Unplug this apparatus during lightning storms or when unused for long periods of time. 3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit s ventilation openings with newspapers, tablecloths, curtains, and similar items. 8.Protect the power cord from being walked on or pinched particularly at plugs. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.Only use attachments/accessories specified by the manufacturer. 5. Do not place sources of naked flames, such as lighted candles, on the unit. 10.Refer all servicing to qualified service personnel.

3 Table of Contents Introduction... 2 Overview... 2 Features... 3 Package Contents... 3 Specifications... 4 EX0101-N EX0101-N Panel... 8 EX0101-N EX0101-N Hardware Installation Operations with IR and RS IR Control Scenario Scenario RS232 Control Scenario Scenario Troubleshooting Product Service Maintenance Provided Service Mail-In Service Warranty Warranty Limits and Exclusions Glossary

4 Introduction Overview EX0101-N (N343 for short) and EX0101-N (N353 for short), a pair of slim HDMI extenders, are designed to extend HDMI signals up to 100 meters via a single CAT5e/CAT6 cable. N343 and N353 just need a single power supply to power both devices via its bi-directional PoE function. You can control the source from the sink's location or control the sink from source's location via IR pass-through function. N343 and N353, easy to install and space saving, offer solutions for home, office, digital entertainment centers, control centers, conference rooms, school and corporate training environments. 2

5 Features Slim appearance and space saving. Support bi-directional PoE. Transfer bi-directional infrared control signal together with the HDMI signal. Use a pair of N343 and N353 to extend HDMI signals without additional settings. Use a single CAT5e/CAT6 cable, following the standard of IEEE-568B, to extend the transmission distance up to 100 meters. HDMI 1.4 with 4K2K. HDCP compliant. Support RS232 ports for firmware upgrading or signal controlling. Package Contents 1 x Transmitter EX0101-N x Receiver EX0101-N x 18V 2A DC power supply 1 x Power cable 4 x Mounting ear 2 x IR emitter cable 2 x IR receiver cable 3

6 Specifications EX0101-N Technical Input Input Signal Type Input Resolution Support Input Video Level Output Output Signal Type Output Resolution Support Video Impedance Maximum Pixel Clock Operating Temperature Storage Temperature Power Supply 1 x HDMI IN HDMI 1.4 with 4K2K 3840x2160/1080P/1080i/720P/576P /480P/576i/480i V p-p 1 x HDBT OUT HDBT 3840x2160/1080P/1080i/720P/576P/ /480P/576i/480i 100Ω 297MHz 32 F to 95 F (0 C to 35 C) 10% to 90%, non-condensing -4 F to 140 F (-20 C to 70 C) 10% to 90%, non-condensing DC 18V 2A 4

7 Technical Power Consumption ESD Protection N343 powers N353 with PoE: 13W for N343 and N353 N343 and N353 connected to power supplies: 5.5W for N343 Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) Surge Protection System Requirements IEC (EFT) 40A (5/50ns); IEC (Lightning) 25A (8/20μs) HDMI equipped source devices HDMI cables HDMI equipped displays (TVs or monitors) Industry standard CAT5e/CAT6 cables Cable Specifications It's recommended that straight-through Ethernet cables of T568B be required. Cable Type Range Supported Video CAT5e/CAT6 100 m 1080p, 60 Hz 36 bpp CAT6a/CAT7 General Product Weight Case Dimension (W x H x D) 70 m 1080p 60 Hz 48 bpp 1080p 60 Hz 3D 100m 4K2K 30Hz 220g 190 mm x 95 mm x 138 mm 7.5'' x 3.7'' x 5.4'' 5

8 Technical Product Dimension (W x H x D) Certification 135 mm 14 mm 77 mm 5.3'' x 0.6''x3'' CE, FCC, RoHS EX0101-N Technical Input Input Signal Type Input Resolution Support Input Video Level Output Output Signal Type Output Resolution Support Video Impedance Maximum Pixel Clock Operating Temperature Storage 1 x HDBT IN HDBT 3840x2160/1080P/1080i/720P/576P /480P/576i/480i V p-p 1 x HDMI OUT HDMI: HDMI 1.4 with 4K2K 3840x2160/1080P/1080i/720P/576P/ /480P/576i/480i 100Ω 297 MHz 32 F to 95 F (0 C to 35 C) 10% to 90%, non-condensing -4 F to 140 F (-20 C to 70 C) 6

9 Technical Temperature Power Supply Power Consumption ESD Protection 10% to 90%, non-condensing DC 18V 2A N353 powers N343 with PoE: 12.2W for N343 and N353 N343 and N353 connected to power supplies: 7.6W for N353 Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) Surge Protection System Requirements IEC (EFT) 40A (5/50ns); IEC (Lightning) 25A (8/20μs) HDMI equipped source devices HDMI cables HDMI equipped displays (TVs or monitors) Industry standard CAT5e/CAT6 cables Cable Specifications It's recommended that straight-through Ethernet cables of T568B be required. Cable Type Range Supported Video CAT5e/CAT6 100 m 1080p, 60 Hz 36 bpp CAT6a/CAT7 General Product Weight 70 m 1080p 60 Hz 48 bpp 1080p 60 Hz 3D 100m 4K2K 30Hz 240g 7

10 Technical Case Dimension (W x H x D) Product Dimension (W x H x D) Certification 190 mm x 95 mm x 138 mm 7.5'' x 3.7'' x 5.4'' 135 mm 14 mm 77 mm 5.3'' x 0.6''x3'' CE, FCC, RoHS Panel EX0101-N ID Name Description 1 Power LED On: N343 is powered on. Off: N343 is powered off. 2 Status LED Blinking: N343 works properly. Off: N343 does not work properly. 3 Link LED On: N343 and N353 are linked to each other. Off/Blinking: Connection exceptions exist between N343 and N HDCP LED On: HDCP video is being transmitted. Blinking: No HDCP video is being transmitted. 8

11 Rear Panel ID Name Description 1 Power Connect to a power supply via a power adapter. Note: If N343 is connected to a power supply, N353 is adapter free. If N353 is connected to a power supply, N343 is adapter free. 2 HDBT OUT Connect to the N353 via a CAT5e/CAT6 cable. 3 IR RX Connect to an IR receiver cable. 4 IR TX Connect to an IR emitter cable. 9

12 ID Name Description 5 RS232 Used to connect to a computer to update firmware or connect a RS232 device. 6 HDMI IN Connect to a source device via an HDMI cable. 7 ETHERNET Connect to a network access point, for example connect a router to allow a network terminal device attached to N353 (such as a computer) to access the network. Connect to a network terminal device, such as a computer, which can access the network if N353 is connected to a network access point. 8 Mode Normal: N343 works properly. RS232 signals can be transmitted N343 cannot be updated. Update: N343 works properly. RS232 signals cannot be transmitted. N343 can be updated. EX0101-N Front Panel 4 10

13 ID Name Description 1 Power LED On: N343 is powered on. Off: N343 is powered off. 2 Status LED Blinking: N343 works properly. Off: N343 does not work properly. 3 Link LED On: N343 and N353 are linked to each other. Off/Blinking: Connection exceptions exist between N343 and N HDCP LED On: HDCP video is being transmitted. Blinking: no HDCP video is being transmitted. 11

14 Rear Panel ID Name Description 1 Power Connect to a power supply via a power adapter. Note: If N353 is connected to a power supply, N343 is adapter free. If N343 is connected to a power supply, N353 is adapter free. 2 HDBT IN Connect to the N343 via a CAT5e/CAT6 cable. 3 IR RX Connect to an IR receiver cable. 4 IR TX Connect to an IR emitter cable. 12

15 ID Name Description 5 RS232 Used to connect to a computer to update firmware or connect a RS232 device. 6 HDMI OUT Connect to a sink via an HDMI cable. 7 ETHERNET Connect to a network access point, for example connect a router to allow a network terminal device attached to N343 (such as a computer) to access the network. Connect to a network terminal device, such as a computer, which can access the internet if N353 is connected to a router. 8 Mode Normal: N353 works properly. RS232 signals can be transmitted N353 cannot be updated. Update: N353 works properly. RS232 signals cannot be transmitted N353 can be updated. 13

16 Hardware Installation Warnings Before the installation, disconnect the power supplies from all the devices. It's recommended that you do not connect or disconnect cables from the N343 and N353 when they are powered on. To connect or disconnect cables from N343 and N353, power them off first. You must straight-through Ethernet cables of T568B and do not use cross-over Ethernet cables. Please connect and disconnect cables gently. 1. Connect the source (such as HD-DVD) to HDMI IN on N343 via an HDMI cable. 2. Connect an IR emitter cable to IR TX and an IR receiver cable to IR RX on N Connect a sink (such as HD-LCD)to HDMI OUT on N Connect an IR emitter cable to IR TX and an IR receiver cable to IR RX on N Connect HDBT OUT on N343 to HDBT IN on N353 via a CAT5e/CAT6 cable. 6. Connect all the devices to the power supplies and start the operations. 14

17 TV remote TV Remote IR receiver cable IR emitter cable N343 N353 IR receiver cable IR emitter cable DVD remote 15

18 Operations with IR and RS232 IR Control IR pass-through function in N343 and N353 allows you to control the source from the sink's location or control the sink from source's location. Scenario 1 In this case, IR RX on N343 is connected to an IR receiver cable and IR TX on N353 is connected to an IR emitter cable. You can control the TV on the N343's location with the TV remote. HDMI TV remote Blue-ray DVD Ethernet IR IR receiver cable TV Remote N343 N353 IR emitter cable TV 16

19 Scenario 2 In this case, IR TX on N343 is connected to an IR emitter cable and IR RX on N353 is connected to an IR receiver cable. You can control the DVD-player on the N353's location with the DVD remote. HDMI Blue-ray DVD Ethernet IR IR emitter cable TV Remote N343 N353 IR receiver cable TV RS232 Control DVD remote You can use a RS232 port on N343 or N353 to connect to a computer to update firmware or connect a RS232 device to communicate with another RS232 device on the other extender's side via a CAT5e/CAT6 cable. 17

20 Scenario 1 Scenario 2 RS232 Ethernet RS232 device N343 N353 RS232 device 18

21 Troubleshooting Q1: Why the power LED is off? A1: Check that power supplies of all the devices are powered on. Check that all the cables are qualified and connected properly. Q2: Why the Link LED is off or blinking? A2: Check that power supplies of all the devices are powered on. Check that all the cables are qualified and connected properly. Check that the length of CAT5e/CAT6 is appropriate. For more information, see cable specifications in Specifications. Check that N343 and N353 work properly. Q3: Why the sink connected to the N353 shows no picture? A3: Check that power supplies of all the devices are powered on. Check that all the cables are qualified and connected properly. Check that the display works properly, and that source devices have normal signals output. Check that your sink is switched to the correct source input mode, such as switching to HDMI 1 if HDMI 1 interface is connected to the N353 via a HDMI cable. Check that no compatibility issues exist between N353 and sink. If so, replace the sink with other models. 19

22 Q4: Why the sink connected to N353 displays snow or mosaic? A4: Check that all the cables are qualified and connected properly. Check that Ethernet cables are CAT5e/CAT6 or better cables. Check that the input sources have no problems, such as snow, mosaic or a damaged disc. If so, replace them with the normal input sources. Check that no compatibility issues exist between N353 and sink. If so, replace the sink with other models. 20

23 Product Service Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Provided Service 1. Damage Requiring service: The unit should be serviced by qualified service personnel if: The DC power supply cord or AC adapter has been damaged; Objects or liquids have gotten into the unit; The unit has been exposed to rain; The unit does not operate normally or exhibits a marked change in performance; The unit has been dropped or the cabinet damaged. 1. Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 2. Replacement parts: When parts need replacing ensure the service uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 3. Safety check: After repairs or service, ask the service to perform safety checks to confirm that the unit is in proper working condition. Mail-In Service When shipping the unit, carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the 21

24 complaint and provide a day time phone and/or address where you can be reached. If repair is needed during the limited warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase, amount paid and place of purchase. Customer will be charged for the repair of any unit received without such proof of purchase. Warranty If your product does not work properly because of a defect in materials or workmanship, Grandbeing Company (referred to as the warrantor ) will, for the length of the period indicated as below,(parts (1) Year, Labor(90) Days)which starts with the date of original purchase ( Limited Warranty period ), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the Labor Limited Warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service. Warranty Limits and Exclusions 1. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, maladjustment of 22

25 consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service Center or other Authorized Service, or damage that is attributable to acts of God. 2. There are no express warranties except as listed under limited warranty coverage. The warrantor is not liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service location, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) 3. Parts and service, which are not covered by this limited warranty, are your responsibility. 23

26 Glossary DVD ESD HD HDBT HDCP HDMI IR LCD LED PoE Digital Video Disc Electro-static Discharge High Definition HDBaseT High-bandwidth Digital Content Protection High Definition Multimedia Interface Infra-red Liquid Crystal Display Light Emitting Diode Power over Ethernet 24

27 Grandbeing Technology Co., Ltd. Address: B-301,Science and Technology Building Phase11, 1057 Nanhai Rd, Nanshan District, Shenzhen, P.P.China Tel: Fax: Post Code:

职位签字人项目负责人肖毅项目经理高健测试经理刘志科业务黄全忠签字 xiaoyi 2014.04.

28 职位签字人项目负责人肖毅项目经理高健测试经理刘志科业务黄全忠签字 xiaoyi :38:04 +08'00' liu zhi ke 数字签名人 liu zhi ke DN cn=liu zhi ke c=<无> o=dqa ou=rd =liuzhike 日期 :29:46 +08'00' :54:03 +08'00'

Operating Instructions

Model No.: HA0101-320 Operating Instructions Thanks for purchasing our product. Please be sure to read this instruction manual carefully before using our product. Introduction HA0101-320 is a HDMI 3D to